The ADD_ADDR 0 with the address from the initial subflow should not be
considered as a new address: this is not something new. If the host
receives it, it simply means that the address is available again.
When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider
it as new by not incrementing the 'add_addr_accepted' counter. But the
'accept_addr' might not be set if the limit has already been reached:
this can be bypassed in this case. But before, it is important to check
that this ADD_ADDR for the ID 0 is for the same address as the initial
subflow. If not, it is not something that should happen, and the
ADD_ADDR can be ignored.
Note that if an ADD_ADDR is received while there is already a subflow
opened using the same address, this ADD_ADDR is ignored as well. It
means that if multiple ADD_ADDR for ID 0 are received, there will not be
any duplicated subflows created by the client.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow might have already been closed, but still in the
connection list. When the worker is instructed to close the subflows
that have been marked as closed, it might then try to close the initial
subflow again.
A consequence of that is that the SUB_CLOSED event can be seen twice:
# ip mptcp endpoint
1.1.1.1 id 1 subflow dev eth0
2.2.2.2 id 2 subflow dev eth1
# ip mptcp monitor &
[ CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9
# ip mptcp endpoint delete id 1
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the
second one from __mptcp_close_subflow().
To avoid doing the post-closed processing twice, the subflow is now
marked as closed the first time.
Note that it is not enough to check if we are dealing with the first
subflow and check its sk_state: the subflow might have been reset or
closed before calling mptcp_close_ssk().
Fixes: b911c97c7d ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
'local_addr_used' and 'add_addr_accepted' are decremented for addresses
not related to the initial subflow (ID0), because the source and
destination addresses of the initial subflows are known from the
beginning: they don't count as "additional local address being used" or
"ADD_ADDR being accepted".
It is then required not to increment them when the entrypoint used by
the initial subflow is removed and re-added during a connection. Without
this modification, this entrypoint cannot be removed and re-added more
than once.
Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/512
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Reported-by: syzbot+455d38ecd5f655fc45cf@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/00000000000049861306209237f4@google.com
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is possible to have in the list already closed subflows, e.g. the
initial subflow has been already closed, but still in the list. No need
to try to close it again, and increments the related counters again.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID -- most services managing the endpoints automatically don't
force the ID to be the same as before. It is then important to track
these modifications to be consistent with the ID being used for the
address used by the initial subflow, not to confuse the other peer or to
send the ID 0 for the wrong address.
Now when removing an endpoint, msk->mpc_endpoint_id is reset if it
corresponds to this endpoint. When adding a new endpoint, the same
variable is updated if the address match the one of the initial subflow.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The lookup_subflow_by_daddr() helper checks if there is already a
subflow connected to this address. But there could be a subflow that is
closing, but taking time due to some reasons: latency, losses, data to
process, etc.
If an ADD_ADDR is received while the endpoint is being closed, it is
better to try connecting to it, instead of rejecting it: the peer which
has sent the ADD_ADDR will not be notified that the ADD_ADDR has been
rejected for this reason, and the expected subflow will not be created
at the end.
This helper should then only look for subflows that are established, or
going to be, but not the ones being closed.
Fixes: d84ad04941 ("mptcp: skip connecting the connected address")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Taking the first one on the list doesn't work in some cases, e.g. if the
initial subflow is being removed. Pick another one instead of not
sending anything.
Fixes: 84dfe3677a ("mptcp: send out dedicated ADD_ADDR packet")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. When an endpoint is being
deleted, it is then important to check if its address is not linked to
the initial subflow to send the right ID.
If there was an endpoint linked to the initial subflow, msk's
mpc_endpoint_id field will be set. We can then use this info when an
endpoint is being removed to see if it is linked to the initial subflow.
So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(),
it is no longer needed to use mptcp_local_id_match().
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the endpoint used by the initial subflow is removed and re-added
later, the PM has to force the ID 0, it is a special case imposed by the
MPTCP specs.
Note that the endpoint should then need to be re-added reusing the same
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pr_debug() have been added in various places in MPTCP code to help
developers to debug some situations. With the dynamic debug feature, it
is easy to enable all or some of them, and asks users to reproduce
issues with extra debug.
Many of these pr_debug() don't end with a new line, while no 'pr_cont()'
are used in MPTCP code. So the goal was not to display multiple debug
messages on one line: they were then not missing the '\n' on purpose.
Not having the new line at the end causes these messages to be printed
with a delay, when something else needs to be printed. This issue is not
visible when many messages need to be printed, but it is annoying and
confusing when only specific messages are expected, e.g.
# echo "func mptcp_pm_add_addr_echoed +fmp" \
> /sys/kernel/debug/dynamic_debug/control
# ./mptcp_join.sh "signal address"; \
echo "$(awk '{print $1}' /proc/uptime) - end"; \
sleep 5s; \
echo "$(awk '{print $1}' /proc/uptime) - restart"; \
./mptcp_join.sh "signal address"
013 signal address
(...)
10.75 - end
15.76 - restart
013 signal address
[ 10.367935] mptcp:mptcp_pm_add_addr_echoed: MPTCP: msk=(...)
(...)
=> a delay of 5 seconds: printed with a 10.36 ts, but after 'restart'
which was printed at the 15.76 ts.
The 'Fixes' tag here below points to the first pr_debug() used without
'\n' in net/mptcp. This patch could be split in many small ones, with
different Fixes tag, but it doesn't seem worth it, because it is easy to
re-generate this patch with this simple 'sed' command:
git grep -l pr_debug -- net/mptcp |
xargs sed -i "s/\(pr_debug(\".*[^n]\)\(\"[,)]\)/\1\\\n\2/g"
So in case of conflicts, simply drop the modifications, and launch this
command.
Fixes: f870fa0b57 ("mptcp: Add MPTCP socket stubs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-4-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'mptcp_subflow_context' structure has two items related to the
backup flags:
- 'backup': the subflow has been marked as backup by the other peer
- 'request_bkup': the backup flag has been set by the host
Looking only at the 'backup' flag can make sense in some cases, but it
is not the behaviour of the default packet scheduler when selecting
paths.
As explained in the commit b6a66e521a ("mptcp: sched: check both
directions for backup"), the packet scheduler should look at both flags,
because that was the behaviour from the beginning: the 'backup' flag was
set by accident instead of the 'request_bkup' one. Now that the latter
has been fixed, get_retrans() needs to be adapted as well.
Fixes: b6a66e521a ("mptcp: sched: check both directions for backup")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-3-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a peer decides to close one subflow in the middle of a connection
having multiple subflows, the receiver of the first FIN should accept
that, and close the subflow on its side as well. If not, the subflow
will stay half closed, and would even continue to be used until the end
of the MPTCP connection or a reset from the network.
The issue has not been seen before, probably because the in-kernel
path-manager always sends a RM_ADDR before closing the subflow. Upon the
reception of this RM_ADDR, the other peer will initiate the closure on
its side as well. On the other hand, if the RM_ADDR is lost, or if the
path-manager of the other peer only closes the subflow without sending a
RM_ADDR, the subflow would switch to TCP_CLOSE_WAIT, but that's it,
leaving the subflow half-closed.
So now, when the subflow switches to the TCP_CLOSE_WAIT state, and if
the MPTCP connection has not been closed before with a DATA_FIN, the
kernel owning the subflow schedules its worker to initiate the closure
on its side as well.
This issue can be easily reproduced with packetdrill, as visible in [1],
by creating an additional subflow, injecting a FIN+ACK before sending
the DATA_FIN, and expecting a FIN+ACK in return.
Fixes: 40947e1399 ("mptcp: schedule worker when subflow is closed")
Cc: stable@vger.kernel.org
Link: https://github.com/multipath-tcp/packetdrill/pull/154 [1]
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-1-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
select_local_address() and select_signal_address() both select an
endpoint entry from the list inside an RCU protected section, but return
a reference to it, to be read later on. If the entry is dereferenced
after the RCU unlock, reading info could cause a Use-after-Free.
A simple solution is to copy the required info while inside the RCU
protected section to avoid any risk of UaF later. The address ID might
need to be modified later to handle the ID0 case later, so a copy seems
OK to deal with.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reacting upon the reception of an ADD_ADDR, the in-kernel PM first
looks for fullmesh endpoints. If there are some, it will pick them,
using their entry ID.
It should set the ID 0 when using the endpoint corresponding to the
initial subflow, it is a special case imposed by the MPTCP specs.
Note that msk->mpc_endpoint_id might not be set when receiving the first
ADD_ADDR from the server. So better to compare the addresses.
Fixes: 1a0d6136c5 ("mptcp: local addresses fullmesh")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-12-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ID 0 is specific per MPTCP connections. The per netns entries cannot
have this special ID 0 then.
But that's different for the userspace PM where the entries are per
connection, they can then use this special ID 0.
Fixes: f40be0db0b ("mptcp: unify pm get_flags_and_ifindex_by_id")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-11-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding the following warning ...
WARN_ON_ONCE(msk->pm.add_addr_accepted == 0)
... before decrementing the add_addr_accepted counter helped to find a
bug when running the "remove single subflow" subtest from the
mptcp_join.sh selftest.
Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the
subflow closure. Before this patch, and upon the reception of the
RM_ADDR, the other peer will then try to decrement this
add_addr_accepted. That's not correct because the attached subflows have
not been created upon the reception of an ADD_ADDR.
A way to solve that is to decrement the counter only if the attached
subflow was an MP_JOIN to a remote id that was not 0, and initiated by
the host receiving the RM_ADDR.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-9-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding the following warning ...
WARN_ON_ONCE(msk->pm.local_addr_used == 0)
... before decrementing the local_addr_used counter helped to find a bug
when running the "remove single address" subtest from the mptcp_join.sh
selftests.
Removing a 'signal' endpoint will trigger the removal of all subflows
linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with
rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used
counter, which is wrong in this case because this counter is linked to
'subflow' endpoints, and here it is a 'signal' endpoint that is being
removed.
Now, the counter is decremented, only if the ID is being used outside
of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and
if the ID is not 0 -- local_addr_used is not taking into account these
ones. This marking of the ID as being available, and the decrement is
done no matter if a subflow using this ID is currently available,
because the subflow could have been closed before.
Fixes: 06faa22710 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-8-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This helper is confusing. It is in pm.c, but it is specific to the
in-kernel PM and it cannot be used by the userspace one. Also, it simply
calls one in-kernel specific function with the PM lock, while the
similar mptcp_pm_remove_addr() helper requires the PM lock.
What's left is the pr_debug(), which is not that useful, because a
similar one is present in the only function called by this helper:
mptcp_pm_nl_rm_subflow_received()
After these modifications, this helper can be marked as 'static', and
the lock can be taken only once in mptcp_pm_flush_addrs_and_subflows().
Note that it is not a bug fix, but it will help backporting the
following commits.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-7-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If no subflows are attached to the 'subflow' endpoints that are being
flushed, the corresponding addr IDs will not be marked as available
again.
Mark all ID as being available when flushing all the 'subflow'
endpoints, and reset local_addr_used counter to cover these cases.
Note that mptcp_pm_remove_addrs_and_subflows() helper is only called for
flushing operations, not to remove a specific set of addresses and
subflows.
Fixes: 06faa22710 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-5-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If no subflow is attached to the 'subflow' endpoint that is being
removed, the addr ID will not be marked as available again.
Mark the linked ID as available when removing the 'subflow' endpoint if
no subflow is attached to it.
While at it, the local_addr_used counter is decremented if the ID was
marked as being used to reflect the reality, but also to allow adding
new endpoints after that.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-3-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If no subflow is attached to the 'signal' endpoint that is being
removed, the addr ID will not be marked as available again.
Mark the linked ID as available when removing the address entry from the
list to cover this case.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-1-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ssn_offset field is u32 and is placed into the netlink response with
nla_put_u32(), but only 2 bytes are reserved for the attribute payload
in subflow_get_info_size() (even though it makes no difference
in the end, as it is aligned up to 4 bytes). Supply the correct
argument to the relevant nla_total_size() call to make it less
confusing.
Fixes: 5147dfb508 ("mptcp: allow dumping subflow context to userspace")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240812065024.GA19719@asgard.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Up to the 'Fixes' commit, having an endpoint with both the 'signal' and
'subflow' flags, resulted in the creation of a subflow and an address
announcement using the address linked to this endpoint. After this
commit, only the address announcement was done, ignoring the 'subflow'
flag.
That's because the same bitmap is used for the two flags. It is OK to
keep this single bitmap, the already selected local endpoint simply have
to be re-used, but not via select_local_address() not to look at the
just modified bitmap.
Note that it is unusual to set the two flags together: creating a new
subflow using a new local address will implicitly advertise it to the
other peer. So in theory, no need to advertise it explicitly as well.
Maybe there are use-cases -- the subflow might not reach the other peer
that way, we can ask the other peer to try initiating the new subflow
without delay -- or very likely the user is confused, and put both flags
"just to be sure at least the right one is set". Still, if it is
allowed, the kernel should do what has been asked: using this endpoint
to announce the address and to create a new subflow from it.
An alternative is to forbid the use of the two flags together, but
that's probably too late, there are maybe use-cases, and it was working
before. This patch will avoid people complaining subflows are not
created using the endpoint they added with the 'subflow' and 'signal'
flag.
Note that with the current patch, the subflow might not be created in
some corner cases, e.g. if the 'subflows' limit was reached when sending
the ADD_ADDR, but changed later on. It is probably not worth splitting
id_avail_bitmap per target ('signal', 'subflow'), which will add another
large field to the msk "just" to track (again) endpoints. Anyway,
currently when the limits are changed, the kernel doesn't check if new
subflows can be created or removed, because we would need to keep track
of the received ADD_ADDR, and more. It sounds OK to assume that the
limits should be properly configured before establishing new
connections.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It sounds better to avoid wasting cycles and / or put extreme memory
pressure on the system by trying to create new subflows if it was not
possible to add a new item in the announce list.
While at it, a warning is now printed if the entry was already in the
list as it should not happen with the in-kernel path-manager. With this
PM, mptcp_pm_alloc_anno_list() should only fail in case of memory
pressure.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in the 'Fixes' commit, the port flag is only supported by
the 'signal' flag, and not by the 'subflow' one. Then if both the
'signal' and 'subflow' flags are set, the problem is the same: the
feature cannot work with the 'subflow' flag.
Technically, if both the 'signal' and 'subflow' flags are set, it will
be possible to create the listening socket, but not to establish a
subflow using this source port. So better to explicitly deny it, not to
create some confusions because the expected behaviour is not possible.
Fixes: 09f12c3ab7 ("mptcp: allow to use port and non-signal in set_flags")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, receiving an ADD_ADDR echo on the just connected
MP_JOIN subflow -- initiator side, after the MP_JOIN 3WHS -- was
resulting in an MP_RESET. That's because only ACKs with a DSS or
ADD_ADDRs without the echo bit were allowed.
Not allowing the ADD_ADDR echo after an MP_CAPABLE 3WHS makes sense, as
we are not supposed to send an ADD_ADDR before because it requires to be
in full established mode first. For the MP_JOIN 3WHS, that's different:
the ADD_ADDR can be sent on a previous subflow, and the ADD_ADDR echo
can be received on the recently created one. The other peer will already
be in fully established, so it is allowed to send that.
We can then relax the conditions here to accept the ADD_ADDR echo for
MPJ subflows.
Fixes: 67b12f792d ("mptcp: full fully established support after ADD_ADDR")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-1-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a subflow receives and discards duplicate data, the mptcp
stack assumes that the consumed offset inside the current skb is
zero.
With multiple subflows receiving data simultaneously such assertion
does not held true. As a result the subflow-level copied_seq will
be incorrectly increased and later on the same subflow will observe
a bad mapping, leading to subflow reset.
Address the issue taking into account the skb consumed offset in
mptcp_subflow_discard_data().
Fixes: 04e4cd4f7c ("mptcp: cleanup mptcp_subflow_discard_data()")
Cc: stable@vger.kernel.org
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since its introduction, the mentioned MIB accounted for the wrong
event: wake-up being skipped as not-needed on some edge condition
instead of incoming skb being dropped after landing in the (subflow)
receive queue.
Move the increment in the correct location.
Fixes: ce599c5163 ("mptcp: properly account bulk freed memory")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There was a support for signal endpoints, but only when the endpoint's
flag was changed during a connection. If an endpoint with the signal and
backup was already present, the MP_JOIN reply was not containing the
backup flag as expected.
That's confusing to have this inconsistent behaviour. On the other hand,
the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was
already there, it was just never set before. Now when requesting the
local ID from the path-manager, the backup status is also requested.
Note that when the userspace PM is used, the backup flag can be set if
the local address was already used before with a backup flag, e.g. if
the address was announced with the 'backup' flag, or a subflow was
created with the 'backup' flag.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/507
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Without such counters, it is difficult to easily debug issues with MPJ
not having the backup flags on production servers.
This is not strictly a fix, but it eases to validate the following
patches without requiring to take packet traces, to query ongoing
connections with Netlink with admin permissions, or to guess by looking
at the behaviour of the packet scheduler. Also, the modification is self
contained, isolated, well controlled, and the increments are done just
after others, there from the beginning. It looks then safe, and helpful
to backport this.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'backup' flag from mptcp_subflow_context structure is supposed to be
set only when the other peer flagged a subflow as backup, not the
opposite.
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow
as 'backup' by setting the flag with the same name. Before this patch,
the backup was set if the other peer set it in its MP_JOIN + SYN
request.
It is not correct: the backup flag should be set in the MPJ+SYN+ACK only
if the host asks for it, and not mirroring what was done by the other
peer. It is then required to have a dedicated bit for each direction,
similar to what is done in the subflow context.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'mptcp_subflow_context' structure has two items related to the
backup flags:
- 'backup': the subflow has been marked as backup by the other peer
- 'request_bkup': the backup flag has been set by the host
Before this patch, the scheduler was only looking at the 'backup' flag.
That can make sense in some cases, but it looks like that's not what we
wanted for the general use, because either the path-manager was setting
both of them when sending an MP_PRIO, or the receiver was duplicating
the 'backup' flag in the subflow request.
Note that the use of these two flags in the path-manager are going to be
fixed in the next commits, but this change here is needed not to modify
the behaviour.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the per connection announced address counter is never
decreased. As a consequence, after connection establishment, if
the NL PM deletes an endpoint and adds a new/different one, no
additional subflow is created for the new endpoint even if the
current limits allow that.
Address the issue properly updating the signaled address counter
every time the NL PM removes such addresses.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the per-connection announced address counter is never
decreased. When the user-space PM is in use, this just affect
the information exposed via diag/sockopt, but it could still foul
the PM to wrong decision.
Add the missing accounting for the user-space PM's sake.
Fixes: 8b1c94da1e ("mptcp: only send RM_ADDR in nl_cmd_remove")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is strictly related to commit fb7a0d3348 ("mptcp: ensure snd_nxt
is properly initialized on connect"). It turns out that syzkaller can
trigger the retransmit after fallback and before processing any other
incoming packet - so that snd_una is still left uninitialized.
Address the issue explicitly initializing snd_una together with snd_nxt
and write_seq.
Suggested-by: Mat Martineau <martineau@kernel.org>
Fixes: 8fd738049a ("mptcp: fallback in case of simultaneous connect")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-1-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
491aee894a ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391 ("net: use unrcu_pointer() helper")
b01e1c0307 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We used to call it 'master' socket at the early stages of MPTCP
development, but the correct wording is 'MPTCP' socket opposed to 'TCP
subflows': convert the last 3 comments to use a more appropriate term.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As a wrapper of __tcp_space_from_win(), this patch adds a MPTCP dedicated
space_from_win helper mptcp_space_from_win() in protocol.h to paired with
mptcp_win_from_space().
Use it instead of __tcp_space_from_win() in both mptcp_rcv_space_adjust()
and mptcp_set_rcvlowat().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MPTCP dedicated win_from_space helper mptcp_win_from_space() is defined
in protocol.h, use it in mptcp_rcv_space_adjust() instead of using the TCP
one. Here scaling_ratio is the same as msk->scaling_ratio.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Like previous patch does in TCP, we need to adhere to RFC 1213:
"tcpCurrEstab OBJECT-TYPE
...
The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE- WAIT."
So let's consider CLOSE-WAIT sockets.
The logic of counting
When we increment the counter?
a) Only if we change the state to ESTABLISHED.
When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.
Fixes: d9cd27b8cd ("mptcp: add CurrEstab MIB counter support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmZFcFwQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpuP1EADKJOJRtcvO/av2cUR+HZFDC+s/jBwHIJK+
4UY633zQlxjqc7dt4rX7zk/uk4mkhZnsGY+wS6xH08kB3VO9YksrwREVt6Ur9lP8
UXNVPpPcZ7fFcIp41rYkZX9pTDp2N8z2qsVg7V8wcXJ7EeTXd6L4ZLjhfCiHvs2s
i6yIEwLrW+voYuqSFV7vWBIM3mSXSRTIiO2DqRAOtT2lsj374DOthvP2lOSSb5wq
6TF4s4z3HMGs+HF3rjP5kJ6ic6RdC6i31lzEivUMhwCiKN1AZXdp96KXaC+NVPRV
t5//EdS+pSenQgkg6XH7d5kzFoCUFJfVZt05w0GCqMA081Q9ySjUymN1zedJbGd9
8CDlW01N8XLqG6+F9yakJLSFY+mUFGduPuueTNiUJWP8kTkQCtYIRzZDeyjxQrE5
c17NW5S1uWkf26Ucyi1r+gxw9N4kGkuB3+NitC6DOc7BW5CocEIoqLWi/UH7cEZe
0v6loTakqBAdgh03RCDMUj9Rt/37pQs2KFT9/CazVpbkvkKsue4xK4K2CUFsxqOj
qcoc/LD62at4S3AUWwhUIs3YaQ7v/6AY5hIktqAwsFHmDffUbPdRrXWY1keKIprJ
4qS/sY0M+kvKGnp+80fPVHab9l6/fMLfabIyFuh0M3W/M4eHGt2YfKWreoGEy/1x
xLq2iq+ehw==
=S6Xt
-----END PGP SIGNATURE-----
Merge tag 'net-accept-more-20240515' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"This adds support for IORING_CQE_F_SOCK_NONEMPTY for io_uring accept
requests.
This is very similar to previous work that enabled the same hint for
doing receives on sockets. By far the majority of the work here is
refactoring to enable the networking side to pass back whether or not
the socket had more pending requests after accepting the current one,
the last patch just wires it up for io_uring.
Not only does this enable applications to know whether there are more
connections to accept right now, it also enables smarter logic for
io_uring multishot accept on whether to retry immediately or wait for
a poll trigger"
* tag 'net-accept-more-20240515' of git://git.kernel.dk/linux:
io_uring/net: wire up IORING_CQE_F_SOCK_NONEMPTY for accept
net: pass back whether socket was empty post accept
net: have do_accept() take a struct proto_accept_arg argument
net: change proto and proto_ops accept type
So this file is now self-contained: it can be compiled alone with
analytic tools.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-9-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing from protocol.h depends on mptcp_pm_gen.h, only code from
pm_netlink.c and pm_userspace.c depends on it.
So this include can be moved where it is needed to avoid a "unused
includes" warning.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-8-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
