Commit Graph

24516 Commits

Author SHA1 Message Date
Andrey Grodzovsky
c175cd16df drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
On DELL U3014 if you clear the table before enabling MST it sometimes
hangs the receiver.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05 15:23:49 +10:00
Hersen Wu
5e93b8208d drm/dp/mst: move GUID storage from mgr, port to only mst branch
Previous implementation does not handle case below: boot up one MST branch
to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output
of 1st MST, GUID is not created for 2nd MST branch. When downstream port of
2nd MST branch send upstream request, it fails because 2nd MST branch GUID
is not available.

New Implementation: only create GUID for MST branch and save it within Branch.

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05 15:23:49 +10:00
Mykola Lysenko
cfcfa086d4 drm/dp/mst: change MST detection scheme
1. Get edid for all connected MST displays, not only on logical ports,
   in the same thread as MST topology detection is done:
     There are displays that have branches inside w/o logical ports.
     So in case another SST display connected downstream system can
     end-up in situation when 3 DOWN requests sent: two for
    ‘remote i2c read’ and one for ‘enum path resources’, making slots full.

2. Call notification callback in one place in the end of topology discovery/update:
     This is done to reduce number of events sent to userspace in case complex
     topology discovery is going, adding multiple number of connectors;

3. Remove notification callback call from short pulse interrupt processing function:
     This is done in order not to block interrupt processing function, in case any
     MST request will be made from it. Notification will be send from topology
     discovery/update work item.

Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05 15:23:49 +10:00
Harry Wentland
a9ebb3e46c drm/dp/mst: Calculate MST PBN with 31.32 fixed point
Our PBN value overflows the 20 bits integer part of the 20.12
fixed point. We need to use 31.32 fixed point to avoid this.

This happens with display clocks larger than 293122 (at 24 bpp),
which we see with the Sharp (and similar) 4k tiled displays.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05 15:23:49 +10:00
Imre Deak
4d6a10da79 drm/mst: Add range check for max_payloads during init
max_payload is limited by the space we have in
drm_dp_mst_topology_mgr::vcpi_mask,payload_mask. We need to track
max_payloads+1 IDs in these masks, see drm_dp_mst_assign_payload_id().
Add a sanity check for this.

Caught by coverity.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05 15:23:48 +10:00
Imre Deak
441388a8a7 drm/mst: Don't ignore the MST PBN self-test result
Otherwise this call would have no effect.

Caught by Coverity.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05 15:23:48 +10:00
Insu Yun
dabe19540a drm: fix missing reference counting decrease
In drm_dp_mst_allocate_vcpi, it returns true in two paths,
but in one path, there is no reference couting decrease.

Signed-off-by: Insu Yun <wuninsu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05 15:23:48 +10:00
Dave Airlie
d8b8eb829d Merge branch 'drm-rockchip-next-fixes-2016-01-22' of https://github.com/markyzq/kernel-drm-rockchip into drm-fixes
Here are some fixes for drm/rockchip, these fixes base on drm-next.

These fixes works on my popmetal(rk3288) board.

About patch: drm/atomic-helper: Export framebuffer_changed()
Daniel Vetter ack for merging it through rockchip git trees, so framebuffer_changed() can be reused by drm/rockchip.

All others looks good, so I'd like you can land them.

* 'drm-rockchip-next-fixes-2016-01-22' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: respect CONFIG_DRM_FBDEV_EMULATION
  drm/rockchip: fix wrong pitch/size using on gem
  drm/rockchip: explain why we can't wait_for_vblanks
  drm/rockchip: don't wait for vblank if fb hasn't changed
  drm/atomic-helper: Export framebuffer_changed()
  drm/rockchip/dsi: fix handling mipi_dsi_pixel_format_to_bpp result
  drm/rockchip: vop: fix mask when updating interrupts
  drm/rockchip: cleanup unnecessary export symbol
  drm/rockchip: Don't build rockchip_drm_vop as modules
2016-01-29 10:04:29 +10:00
Rob Clark
96c5d076f0 drm/vmwgfx: respect 'nomodeset'
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-01-29 10:03:44 +10:00
Dave Airlie
2ad14a6ca2 This pull request just includes the !CONFIG_PM_SLEEP build fix for
vc4.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJWnqxfAAoJELXWKTbR/J7oIUQQAIswWnwRLqsNU+2gX6+rG20i
 SA5KsUidfi644MPMzR5t5js57EkV8r70mtMhoZ3cU5VYXOdk6WdnN0OQVIrd5inb
 wQILCb2e0kWUZ39+TLeIGEmQ482+bp6yM1jVijxTrvvv/tpyI5cDIezVVzdDjWW4
 Ah1vXpfppTFlTWwe9ZNrNjcmqIw4oQ2mQMnEFhTUbZnUPOqPnSC6/ZCOvybgV1E9
 xsn6Gk+eLPxjKmNucFMtnjdlE6hGNlL+N0IZmPRzc0imoGgzUFQoQiSKROkMbJE0
 NGNvPzTux82B4PR0q9yQHu4PrhNiBG2GT2HibrT5QrliwK489bKXcGG0Kh6hHGCl
 RUUkB1fk1daxf8XTE9aBv4s+XnWzeeGOiqsVPG+BNCfc6IoYKPTN0a0jzfy0tk+g
 sZMjB3r1xY1lS2IHyJ9fAGH86SmSpQPqjap8t0KRnFqORj03ch67GJLOYlVHVqu2
 avngB/ByGVcFMElC8ccp2d3rbxKjDwDdBsFFn685hOSYE+ZkGQRpF2FRA6JplcHf
 xKzfbyhjzwURhJMVjz2F5ZNl+qGC1SAaI9BMFaw+PmW2PPtffHHITO1PwRpbQA7K
 UM5Z3GTB6JFOqTbMutltjUVKUsH48HLQMoQMBvAE8xg5o/GPaUXRn1FKQH1lBeuT
 zucC/MZBqHffFSlbqpuj
 =Qvir
 -----END PGP SIGNATURE-----

Merge tag 'drm-vc4-fixes-2015-01-19' of http://github.com/anholt/linux into drm-fixes

This pull request just includes the !CONFIG_PM_SLEEP build fix for
vc4.

* tag 'drm-vc4-fixes-2015-01-19' of http://github.com/anholt/linux:
  drm/vc4: Remove broken attempt at GPU reset using genpd.
2016-01-29 10:02:35 +10:00
Dave Airlie
2081e78a5c Merge branch 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux into drm-fixes
A bunch of etnaviv fixes for 4.5-rc. Most of them are fixing
things in code paths that will only be hit if something goes
wrong, which have been unearthed by more extensive testing.

The only thing that doesn't really qualify as fixes is an UAPI
extension that userspace wants to rely on being present, so
I want to fast-track this into 4.5 before etnaviv ends up in a
released kernel.

* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: call correct function when trying to vmap a DMABUF
  drm/etnaviv: rename etnaviv_gem_vaddr to etnaviv_gem_vmap
  drm/etnaviv: fix get pages error path in etnaviv_gem_vaddr
  drm/etnaviv: fix memory leak in IOMMU init path
  drm/etnaviv: add further minor features and varyings count
  drm/etnaviv: add helper for comparing model/revision IDs
  drm/etnaviv: add helper to extract bitfields
  drm/etnaviv: use defined constants for the chip model
  drm/etnaviv: update common and state_hi xml.h files
  drm/etnaviv: ignore VG GPUs with FE2.0
  drm/etnaviv: fix failure path if model is zero
  drm/etnaviv: hold object lock while getting pages for coredump
  drm/etnaviv: remove owner assignment from platform_driver
2016-01-29 10:01:54 +10:00
Dave Airlie
55ce625fc5 Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Misc radeon and amdgpu fixes:
- SMU firmware loading fix for Stoney
- DP audio fixes for DCE4.1
- Don't expose fbdev device if no connectors
- fix page table LRU list update handling

* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: only move pt bos in LRU list on success
  drm/radeon: fix DP audio support for APU with DCE4.1 display engine
  drm/radeon: Add a common function for DFS handling
  drm/radeon: cleaned up VCO output settings for DP audio
  drm/amd/powerplay: Update SMU firmware loading for Stoney
  drm/amdgpu: don't init fbdev if we don't have any connectors
  drm/radeon: only init fbdev if we have connectors
  drm/radeon: Ensure radeon bo is unreserved in radeon_gem_va_ioctl
  drm/amdgpu: fix next_rptr handling for debugfs
  drm/radeon: properly byte swap vce firmware setup
  drm/amdgpu: add a message to indicate when powerplay is enabled (v2)
  drm/amdgpu: fix amdgpu_bo_pin_restricted VRAM placing v2
  drm/amd/amdgpu: Improve amdgpu_dpm* macros to avoid unexpected result (v2)
  drm/amdgpu: Allow the driver to load if amdgpu.powerplay=1 on asics without powerplay support
  drm/amdgpu: Use drm_calloc_large for VM page_tables array
  drm/amdgpu: Add some tweaks to gfx 8 soft reset
  drm/amdgpu: fix tonga smu resume
2016-01-29 10:00:45 +10:00
Nicolai Hähnle
28b8d66e0c drm/amdgpu: only move pt bos in LRU list on success
This fixes a race condition in the error case: since the pt bos have not
necessarily been reserved in case of an error, we could move a pt bo that
is currently in the middle of being evicted/moved by another process,
which then resulted in a BUG_ON in ttm_bo_add_to_lru.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-28 11:46:45 -05:00
Slava Grigorev
fe6fc1f132 drm/radeon: fix DP audio support for APU with DCE4.1 display engine
Properly setup the DFS divider for DP audio for DCE4.1.

Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-01-27 12:50:25 -05:00
Slava Grigorev
a64c9dab1c drm/radeon: Add a common function for DFS handling
Move encoding of DFS (digital frequency synthesizer) divider into a
separate function and improve calculation precision.

Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-01-27 12:48:32 -05:00
Slava Grigorev
c9a392eac1 drm/radeon: cleaned up VCO output settings for DP audio
This is preparation for the fixes in the following patches.

Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-01-27 12:47:28 -05:00
Rex Zhu
08b21d30c6 drm/amd/powerplay: Update SMU firmware loading for Stoney
Fix firmware init on Stoney when powerplay is enabled.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-27 11:40:38 -05:00
Lucas Stach
a0a5ab3e99 drm/etnaviv: call correct function when trying to vmap a DMABUF
When trying to get the vmap address of an imported buffer, we must
call into the appropriate helper function, to allow the exporter to
establish the vmap, instead of trying to vmap the buffer on our own.

Add an indirection through etnaviv_gem_ops to allow the correct
implementation to be called.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-26 18:54:01 +01:00
Lucas Stach
ce3088fdb5 drm/etnaviv: rename etnaviv_gem_vaddr to etnaviv_gem_vmap
This function follows the semantics of vmap() by returning
NULL in case of an error. To make things less confusing
rename it to make make both functions more closely related.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-26 18:54:01 +01:00
Lucas Stach
9f07bb0d4a drm/etnaviv: fix get pages error path in etnaviv_gem_vaddr
In case that etnaviv_gem_get_pages is unable to get the required
pages the object mutex needs to be unlocked. Also return NULL in
this case instead of propagating the error, as callers of this
function might not be prepared to handle a pointer error, but
expect this call to follow the semantics of a plain vmap to return
NULL in case of an error.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-26 18:54:00 +01:00
Lucas Stach
45d16a6d94 drm/etnaviv: fix memory leak in IOMMU init path
Plug in error handling to free any allocated ressources in the
IOMMU init path.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-26 18:53:59 +01:00
Russell King
602eb48966 drm/etnaviv: add further minor features and varyings count
Export further minor feature bitmasks and the varyings count from
the GPU specifications registers to userspace.

Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-26 18:53:58 +01:00
Russell King
472f79dcf2 drm/etnaviv: add helper for comparing model/revision IDs
Add and use a helper for comparing the model and revision IDs.

Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-26 18:53:58 +01:00
Russell King
52f36ba1d6 drm/etnaviv: add helper to extract bitfields
Add a helper to extract etnaviv bitfields from register values.

Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-26 18:53:57 +01:00
Russell King
507f899137 drm/etnaviv: use defined constants for the chip model
Use the defined constants in common.xml.h for the chip model rather
than coding these as hex numbers.

Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-26 18:53:56 +01:00
Russell King
e2a2e263e0 drm/etnaviv: update common and state_hi xml.h files
Update the common and state_hi xml.h header files from the etnaviv
repository.

Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-26 18:53:55 +01:00
Russell King
b98c66887e drm/etnaviv: ignore VG GPUs with FE2.0
Ignore GPUs with a 2.0 front end.  These have a different register
layout for the front end, which provokes imprecise aborts from the
register accesses in the 'gpu' debugfs file.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-26 18:53:27 +01:00
Alex Deucher
f49d45c973 drm/amdgpu: don't init fbdev if we don't have any connectors
Don't init fbdev if we don't have connectors.  E.g., if you have
a PX laptop with the displays attached to an IGP with no driver
support, you may end up with a blank screen rather than falling
back to vesa, etc.

Based on a similar radeon patch from Rob Clark.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-26 00:35:56 -05:00
Rob Clark
f95429eccc drm/radeon: only init fbdev if we have connectors
This fixes an issue that was noticed on an optimus/prime laptop with
a kernel that was old enough to not support the integrated intel gfx
(which was driving all the outputs), but did have support for the
discrete radeon gpu.  The end result was not falling back to VESA and
leaving the user with a black screen.

(Plus it is kind of silly to create an framebuffer device if there
are no outputs hooked up to the gpu.)

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-26 00:35:49 -05:00
Matthew Dawson
186bac8152 drm/radeon: Ensure radeon bo is unreserved in radeon_gem_va_ioctl
Found with lockdep while testing gpu reset.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-25 10:57:17 -05:00
Russell King
f6427760a2 drm/etnaviv: fix failure path if model is zero
Fix the failure path to call pm_runtime_mark_last_busy() when failing
due to the model field being zero.

Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-25 14:23:51 +01:00
Lucas Stach
339073ef77 drm/etnaviv: hold object lock while getting pages for coredump
While all objects that get coredumped have an active IOVA and thus
pages already populated, etnaviv_gem_get_pages() still requires the
object lock to be held.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-25 14:23:49 +01:00
Fabio Estevam
23a9d5dcb6 drm/etnaviv: remove owner assignment from platform_driver
This platform_driver does not need to set an owner as it will be
populated by the driver core.

Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-01-25 14:23:46 +01:00
Tetsuo Handa
1d5cfdb076 tree wide: use kvfree() than conditional kfree()/vfree()
There are many locations that do

  if (memory_was_allocated_by_vmalloc)
    vfree(ptr);
  else
    kfree(ptr);

but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory
using is_vmalloc_addr().  Unless callers have special reasons, we can
replace this branch with kvfree().  Please check and reply if you found
problems.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Boris Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-22 17:02:18 -08:00
Christian König
41f2d99056 drm/amdgpu: fix next_rptr handling for debugfs
That somehow got lost.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-22 14:44:08 -05:00
Alex Deucher
cc78eb2288 drm/radeon: properly byte swap vce firmware setup
Firmware is LE.  Need to properly byteswap some of the fields
so they are interpreted correctly by the driver on BE systems.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-01-22 10:50:24 -05:00
Alex Deucher
9441f964f8 drm/amdgpu: add a message to indicate when powerplay is enabled (v2)
Makes it clear to the user which power management path is in
use.

v2: make consistent with dpm

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-22 10:49:42 -05:00
Christian König
78d0e182b6 drm/amdgpu: fix amdgpu_bo_pin_restricted VRAM placing v2
We could pin BOs into invisible VRAM otherwise.

v2: make logic more readable as suggested by Michel

Cc: stable@vger.kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> (v1)
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2016-01-22 10:47:48 -05:00
Eric Huang
4b5ece24ce drm/amd/amdgpu: Improve amdgpu_dpm* macros to avoid unexpected result (v2)
The two macros returns are values which probably are used
in the expression of calculation. Without the brackets
the result of the expression may be wrong.

v2: agd: squash both patches together

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
2016-01-22 10:47:48 -05:00
John Keeping
f0442df215 drm/rockchip: respect CONFIG_DRM_FBDEV_EMULATION
If DRM_FBDEV_EMULATION is not selected in the config then we can save a
bit of space by not including the framebuffer code.

Signed-off-by: John Keeping <john@metanate.com>
2016-01-22 08:45:31 +08:00
Linus Torvalds
eae21770b4 Merge branch 'akpm' (patches from Andrew)
Merge third patch-bomb from Andrew Morton:
 "I'm pretty much done for -rc1 now:

   - the rest of MM, basically

   - lib/ updates

   - checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit

   - cpu_mask simplifications

   - kexec, rapidio, MAINTAINERS etc, etc.

   - more dma-mapping cleanups/simplifications from hch"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
  MAINTAINERS: add/fix git URLs for various subsystems
  mm: memcontrol: add "sock" to cgroup2 memory.stat
  mm: memcontrol: basic memory statistics in cgroup2 memory controller
  mm: memcontrol: do not uncharge old page in page cache replacement
  Documentation: cgroup: add memory.swap.{current,max} description
  mm: free swap cache aggressively if memcg swap is full
  mm: vmscan: do not scan anon pages if memcg swap limit is hit
  swap.h: move memcg related stuff to the end of the file
  mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
  mm: vmscan: pass memcg to get_scan_count()
  mm: memcontrol: charge swap to cgroup2
  mm: memcontrol: clean up alloc, online, offline, free functions
  mm: memcontrol: flatten struct cg_proto
  mm: memcontrol: rein in the CONFIG space madness
  net: drop tcp_memcontrol.c
  mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM
  mm: memcontrol: allow to disable kmem accounting for cgroup2
  mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
  mm: memcontrol: move kmem accounting code to CONFIG_MEMCG
  mm: memcontrol: separate kmem code from legacy tcp accounting code
  ...
2016-01-21 12:32:08 -08:00
Linus Torvalds
e3de671dd6 asm-generic changes for 4.5
The asm-generic tree this time contains one series from Nicolas Pitre
 that makes the optimized do_div() implementation from the ARM
 architecture available to all architectures. This also adds stricter
 type checking for callers of do_div, which has uncovered a number
 of bugs in existing code, and fixes up the ones we have found.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVqARKWCrR//JCVInAQJrBhAAlwZL0IiVGFfDXWtvQGOm+yC5j4vdIhMf
 1scsvRbk3ln1xUk5+NM61NpxbQotro78K5HxFZFhaVGUTbbFXM9w2VZSyI8ZaGAJ
 Od6lBUUyLQmzlbHDJ3v/zrZn8Up7qZlRApmXcbUVDtssfnEfKk4xA2RG9JwIMS1c
 uZMvnD7N3P9vxDPl+CsYlB2osi6Yks3VQ1tXYe2z6siO+H67zHaF08+ls7fbsd3d
 oyKjZqlaQ02MIOr+AdR0h9iKyJJ6SXT0DQlsMyzB6aBWmeBCNLNALNIiukDk9Qc1
 VV3sF1MOS3LtfU2TeOx4Na7hcd2iC6WYLb271iApO2Ww7t16n+de3i6AipZxLUJ0
 08jiRlisTzUhXDobRSqI3mcQlxrB5UGfyblab2z/MqGGmIGJSPPRdTPRQUgi0ZKg
 jksSmsaPwOQp64FhTgECLJthlYX7h6ULjkvJ9h60gZHa4jhGZbGPeMwHPf1uSm95
 EvQE971Ssgm4jwhvxZ/kt1ruuZI/fxxG1Qfw+C25QkXZGKye2nB+icLWeMwz+FXG
 HLqkmaAjasf5MAV1GiK8U6zoC6bCOLU0Lea83hOwRPZ999v3Nym1giSatNv4/pB+
 QmkXRvFi93cdQ643l7xcUEDT2zpk4pogF3xREiBhyaXtqLlT7pPMKsBQOgdWvFuu
 Ou0ZbEAwIVo=
 =4psa
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic tree this time contains one series from Nicolas Pitre
  that makes the optimized do_div() implementation from the ARM
  architecture available to all architectures.

  This also adds stricter type checking for callers of do_div, which has
  uncovered a number of bugs in existing code, and fixes up the ones we
  have found"

* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  ARM: asm/div64.h: adjust to generic codde
  __div64_32(): make it overridable at compile time
  __div64_const32(): abstract out the actual 128-bit cross product code
  do_div(): generic optimization for constant divisor on 32-bit machines
  div64.h: optimize do_div() for power-of-two constant divisors
  mtd/sm_ftl.c: fix wrong do_div() usage
  drm/mgag200/mgag200_mode.c: fix wrong do_div() usage
  hid-sensor-hub.c: fix wrong do_div() usage
  ti/fapll: fix wrong do_div() usage
  ti/clkt_dpll: fix wrong do_div() usage
  tegra/clk-divider: fix wrong do_div() usage
  imx/clk-pllv2: fix wrong do_div() usage
  imx/clk-pllv1: fix wrong do_div() usage
  nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage
2016-01-20 17:30:20 -08:00
Mark Yao
e3c4abdb3b drm/rockchip: fix wrong pitch/size using on gem
args->pitch and args->size may not be set by userspace, sometimes
userspace only malloc args and not memset args to zero, then
args->pitch and args->size is random, it is very danger to use
pitch/size on gem.

pitch's type is u32, and min_pitch's type is int, example,
pitch is 0xffffffff, then pitch < min_pitch return true, then gem will
alloc very very big bufffer, it would eat all the memory and cause kernel
crash.

Stop using pitch/size from args, calc them from other args.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2016-01-21 09:14:05 +08:00
Christoph Hellwig
e1c7e32453 dma-mapping: always provide the dma_map_ops based implementation
Move the generic implementation to <linux/dma-mapping.h> now that all
architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now
that everyone supports them.

[valentinrothberg@gmail.com: remove leftovers in Kconfig]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Helge Deller <deller@gmx.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Linus Torvalds
d9569f003c Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
 - Make <modname>-m in makefiles work like <modname>-y and fix the
   fallout
 - Minor genksyms fix
 - Fix race with make -j install modules_install
 - Move -Wsign-compare from make W=1 to W=2
 - Other minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Demote 'sign-compare' warning to W=2
  Makefile: revert "Makefile: Document ability to make file.lst and file.S" partially
  kbuild: Do not run modules_install and install in paralel
  genksyms: Handle string literals with spaces in reference files
  fixdep: constify strrcmp arguments
  ath10k: Fix build with CONFIG_THERMAL=m
  Revert "drm: Hack around CONFIG_AGP=m build failures"
  kbuild: Allow to specify composite modules with modname-m
  staging/ad7606: Actually build the interface modules
2016-01-20 09:45:43 -08:00
John Keeping
c9ad1d9946 drm/rockchip: explain why we can't wait_for_vblanks
Signed-off-by: John Keeping <john@metanate.com>
2016-01-20 08:56:06 +08:00
John Keeping
f2227f4697 drm/rockchip: don't wait for vblank if fb hasn't changed
As commented in drm_atomic_helper_wait_for_vblanks(), userspace relies
on cursor ioctls being unsynced.  Converting the rockchip driver to
atomic has significantly impacted cursor performance by making every
cursor update wait for vblank.

By skipping the vblank sync when the framebuffer has not changed (as is
done in drm_atomic_helper_wait_for_vblanks()) we can avoid this for the
common case of moving the cursor and only need to delay the cursor ioctl
when the cursor icon changes.

We cannot add the check on legacy_cursor_update since that results in
the cursor bo being unreferenced while the hardware may still be reading
it.  Fully supporting unsynced cursor updates is left for the future
when the atomic helper framework supports async updates.

Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
2016-01-20 08:55:56 +08:00
John Keeping
c240906d36 drm/atomic-helper: Export framebuffer_changed()
The Rockchip driver cannot use drm_atomic_helper_wait_for_vblanks()
because it has hardware counters for neither vblanks nor scanlines.

In order to simplify re-implementing the functionality for this driver,
export the framebuffer_changed() helper so it can be reused.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-20 08:55:43 +08:00
Eric Anholt
8483d152db drm/vc4: Remove broken attempt at GPU reset using genpd.
I've tested and confirmed that it doesn't actually work.  We'll need
to sort out how to do this properly later, but for now just remove it
since it also caused build breakage due to using CONFIG_PM_SLEEP
functions without our Kconfig depending on PM_SLEEP.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
2016-01-19 13:16:31 -08:00
Jordan Lazare
3466904d38 drm/amdgpu: Allow the driver to load if amdgpu.powerplay=1 on asics without powerplay support
Avoid setting pp_enabled if there is no powerplay implementation.

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-19 12:42:30 -05:00