(pm_idle)() is being removed from linux/pm.h
because Linux does not have such a cross-architecture concept.
sparc uses an idle function pointer in its architecture
specific code. So we re-name sparc use of pm_idle to sparc_idle.
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
SH idle code could use some simplification.
This patch enables that by guaranteeing
that "sh_idle" is local, and thus architecture specific.
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: linux-sh@vger.kernel.org
(pm_idle)() is being removed from linux/pm.h
because Linux does not have such a cross-architecture concept.
x86 uses an idle function pointer in its architecture
specific code as a backup to cpuidle. So we re-name
x86 use of pm_idle to x86_idle, and make it static to x86.
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: x86@kernel.org
Update APM to register its local idle routine with cpuidle.
This allows us to stop exporting pm_idle to modules on x86.
The Kconfig sub-option, APM_CPU_IDLE, now depends on on CPU_IDLE.
Compile-tested only.
Signed-off-by: Len Brown <len.brown@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Since commit 620038f6d2, gcc is throwing the following warning:
CC [M] net/sunrpc/auth_gss/auth_gss.o
In file included from include/linux/sunrpc/types.h:14:0,
from include/linux/sunrpc/sched.h:14,
from include/linux/sunrpc/clnt.h:18,
from net/sunrpc/auth_gss/auth_gss.c:45:
net/sunrpc/auth_gss/auth_gss.c: In function ‘gss_pipe_downcall’:
include/linux/sunrpc/debug.h:45:10: warning: ‘timeout’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
printk(KERN_DEFAULT args); \
^
net/sunrpc/auth_gss/auth_gss.c:194:15: note: ‘timeout’ was declared here
unsigned int timeout;
^
If simple_get_bytes returns an error, then we'll end up calling printk
with an uninitialized timeout value. Reasonably harmless, but fairly
simple to fix by removing the printout of the uninitialised parameters.
Cc: Andy Adamson <andros@netapp.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
[Trond: just remove the parameters rather than initialising timeout]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This reverts commit aac73f3454. That
commit causes two kinds of breakage; it breaks registration of AMBA
devices when one of the parent nodes already contains overlapping
resource regions, and it breaks calls to request_region() by device
drivers in certain conditions where there are overlapping memory
regions. Both of these problems can probably be fixed, but it is better
to back out the commit and get a proper fix designed before trying again.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
As we don't include kernel/Kconfig.hz as this defines HZ values
unsuitable for ARM platforms, add the SCHED_HRTICK to properly configure
the scheduler for hrtimer operation.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This enables autoloading of tsc2005 driver when is compiled as a module.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Renamed mode BQ2415X_MODE_NONE to BQ2415X_MODE_OFF because this mode
turning chaging completly off
* Added new mode BQ2415X_MODE_NONE which enable charging with maximal
current limit 100mA (this is minimal safe value for bq2415x chips)
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
There is a forever loop calling iio_channel_release() because the
"chan < " part of the "chan < ARRAY_SIZE()" is missing. This is in both
the error handling on probe and also in the remove function.
The other thing is that it's possible for some of the elements of the
adc_bat->channel[chan] array to be an ERR_PTR(). I've changed them to be
NULL instead. We're still not allowed to pass NULLs to
iio_channel_release() so I've added a check.
Finally, I removed an unused "chan = ARRAY_SIZE(gab_chan_name);" statement
as a small cleanup.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Fix this link error on s390:
ERROR: "devm_request_threaded_irq" [drivers/power/goldfish_battery.ko] undefined!
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
The mmid macro is meant to be used to get the mm->context.id data
from the mm structure, but it seems to have been missed in a cuple
of files.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Since the new ASID code in b5466f8728
("ARM: mm: remove IPI broadcasting on ASID rollover") was changed to
use 64bit operations it has broken the BE operation due to an issue
with the MM code accessing sub-fields of mm->context.id.
When running in BE mode we see the values in mm->context.id are stored
with the highest value first, so the LDR in the arch/arm/mm/proc-macros.S
reads the wrong part of this field. To resolve this, change the LDR in
the mmid macro to load from +4.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In order to allow drivers to specify private data for each controller,
this commit adds a private_data field to the struct hw_pci. This field
is an array of nr_controllers pointers that will be used to initialize
the private_data field of the corresponding controller's pci_sys_data
structure.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When using deferred driver probing, PCI host controller drivers may
actually require this function after the init stage.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
869486d5f51 (ARM: 7646/1: mm: use static_vm for managing static mapped
areas) introduced new warnings:
arch/arm/mm/mmu.c: In function 'pci_reserve_io':
arch/arm/mm/mmu.c:888:16: warning: unused variable 'addr'
arch/arm/mm/mmu.c:887:20: warning: unused variable 'vm'
because it failed to delete the two local variables it no longer used.
Fix this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
A static mapped area is ARM-specific, so it is better not to use
generic vmalloc data structure, that is, vmlist and vmlist_lock
for managing static mapped area. And it causes some needless overhead and
reducing this overhead is better idea.
Now, we have newly introduced static_vm infrastructure.
With it, we don't need to iterate all mapped areas. Instead, we just
iterate static mapped areas. It helps to reduce an overhead of finding
matched area. And architecture dependency on vmalloc layer is removed,
so it will help to maintainability for vmalloc layer.
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In current implementation, we used ARM-specific flag, that is,
VM_ARM_STATIC_MAPPING, for distinguishing ARM specific static mapped area.
The purpose of static mapped area is to re-use static mapped area when
entire physical address range of the ioremap request can be covered
by this area.
This implementation causes needless overhead for some cases.
For example, assume that there is only one static mapped area and
vmlist has 300 areas. Every time we call ioremap, we check 300 areas for
deciding whether it is matched or not. Moreover, even if there is
no static mapped area and vmlist has 300 areas, every time we call
ioremap, we check 300 areas in now.
If we construct a extra list for static mapped area, we can eliminate
above mentioned overhead.
With a extra list, if there is one static mapped area,
we just check only one area and proceed next operation quickly.
In fact, it is not a critical problem, because ioremap is not frequently
used. But reducing overhead is better idea.
Another reason for doing this work is for removing architecture dependency
on vmalloc layer. I think that vmlist and vmlist_lock is internal data
structure for vmalloc layer. Some codes for debugging and stat inevitably
use vmlist and vmlist_lock. But it is preferable that they are used
as least as possible in outside of vmalloc.c
Now, I introduce an ARM-specific infrastructure for static mapped area. In
the following patch, we will use this and resolve above mentioned problem.
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Now, there is no user for vmregion.
So remove it.
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The MMCI driver has an additional file in include/linux/amba. Include
this file in its maintainer entry.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Parts of the virtual memory layout (mainly the modules area) are
described using open-coded immediate values.
Use the SZ_ definitions from linux/sizes.h instead to make the code
clearer.
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On AMD family 15h processors, there are 4 new performance
counters (in addition to 6 core performance counters) that can
be used for counting northbridge events (i.e. DRAM accesses).
Their bit fields are almost identical to the core performance
counters. However, unlike the core performance counters, these
MSRs are shared between multiple cores (that share the same
northbridge).
We will reuse the same code path as existing family 10h
northbridge event constraints handler logic to enforce
this sharing.
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jacob Shin <jacob.shin@amd.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-7-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recent changes have made it so that MAX_SKB_FRAGS is now never less than 16.
As a result we were seeing issues on systems with 64K pages as it would
cause DESC_NEEDED to increase to 68, and we would need over 136 descriptors
free before clean_tx_irq would wake the queue.
This patch makes it so that DESC_NEEDED is always MAX_SKB_FRAGS + 4. This
should prevent any possible deadlocks on the systems with 64K pages as we will
now only require 42 descriptors to wake.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch makes sure that TXDCTL.WTHRESH is set to 1 when BQL is enabled
and EITR is set to more than 100k interrupts per second to avoid Tx timeouts.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch adds support for reading data from SFP+ modules over i2c.
Signed-off-by: Aurélien Guillaume <footplus@gmail.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch replaces instances where a return code from i2c operations
were checked against a list of error codes with a much simpler
if ( status != 0 ) check.
Some whitespace cleanups included.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch makes sure that the SW lock is released after all i2c
operations complete in the retry code path.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This change adds support for the ethtool set_channels operation.
Since the ixgbe driver has to support DCB as well as the other modes the
assumption I made here is that the number of channels in DCB modes refers
to the number of queues per traffic class, not the number of queues total.
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch adds support for the ethtool get_channels operation.
Since the ixgbe driver has to support DCB as well as the other modes the
assumption I made here is that the number of channels in DCB modes refers
to the number of queues per traffic class, not the number of queues total.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The ixgbe_setup_tc code is essentially the same code we need any time we have
to update the number of queues. As such I am making it available always and
just stripping the DCB specific bits out when DCB is disabled instead of
stripping the entire function.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This change updates the ixgbe driver to use __netdev_pick_tx instead of
the current logic it is using to select a queue. The main result of this
change is that ixgbe can now fully support XPS, and in the case of non-FCoE
enabled configs it means we don't need to have our own ndo_select_queue.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This change adds support for ixgbe to configure the XPS queue mapping on
load. The result of this change is that on open we will now be resetting
the number of Tx queues, and then setting the default configuration for XPS
based on if ATR is enabled or disabled.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Instead of adjusting the FCoE and Flow director limits based on the number
of CPUs we can define them much sooner. This allows the user to come
through later and adjust them once we have updated the code to support the
set_channels ethtool operation.
I am still allowing for FCoE and RSS queues to be separated if the number
queues is less than the number of CPUs. This essentially treats the two
groupings like they are two separate traffic classes.
In addition I am changing the initialization to use the MAX_TX/RX_QUEUES
defines instead of trying to compute the value as it will be possible in
upcoming patches for the user to request the maximum number of queues.
I have also updated things so that the upper limit on queues is exactly 63
instead of allowing it to go up to 64. The reason for this change is to
address the fact thqt the driver only supports up to 63 queue vectors since
the hardware supports 64 MSI-X vectors, but one must be reserved for "other"
causes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
On several machines with i350 adapters the ethtool offline self-test sometimes
fails. This happens because link auto negotiation may take longer than the
timeout of 4 seconds. Increasing the timeout by 1 seconds resolves the issue.
Output from a failing i350 offline self-test:
while [ 1 ]; do ethtool -t eth2 offline; done
The test result is PASS
The test extra info:
Register test (offline) 0
Eeprom test (offline) 0
Interrupt test (offline) 0
Loopback test (offline) 0
Link test (on/offline) 0
The test result is FAIL
The test extra info:
Register test (offline) 0
Eeprom test (offline) 0
Interrupt test (offline) 0
Loopback test (offline) 0
Link test (on/offline) 1
The test result is PASS
The test extra info:
Register test (offline) 0
Eeprom test (offline) 0
Interrupt test (offline) 0
Loopback test (offline) 0
Link test (on/offline) 0
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This change is meant to address several race issues that become possible
because next_to_watch could possibly be set to a value that shows that the
descriptor is done when it is not. In order to correct that we instead make
next_to_watch a pointer that is set to NULL during cleanup, and set to the
eop_desc after the descriptor rings have been written.
To enforce proper ordering the next_to_watch pointer is not set until after
a wmb writing the values to the last descriptor in a transmit. In order to
guarantee that the descriptor is not read until after the eop_desc we use the
read_barrier_depends which is only really necessary on the alpha architecture.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Current e1000e driver doesn't tell nothing when Link Speed is downgraded due to
SmartSpeed. As a result, users suspect that there is something wrong with
NIC. If the cause of it is SmartSpeed, there is no means to replace NIC. This
patch make e1000e notify users that SmartSpeed worked.
Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fixes whitespace issues, such as lines exceeding 80 chars, needless blank
lines and the use of spaces where tabs are needed. In addition, fix
multi-line comments to align with the networking standard.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tegra only supports, and always enables, device tree. Remove all ifdefs
and runtime checks for DT support from the driver. Platform data is
therefore no longer required. Delete the header that defines it, and
rework the driver to parse the device tree directly into struct
tegra_kbc.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To properly setup event parameters for emulated events, pass
the appropriate flag to the slot initialization function. Also,
all MT-related events should be setup before initialization.
Incidentally, this solves the issue of doubly filtered pointer
events.
Reported-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The pointer emulation events are derived from contact values that
have already been filtered, so send the emulated events as is.
Reported-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Make the constants referring to range and bandwidth public so they can
be used when initializing the platform data fields in the platform code.
Fix also some comments regarding the unit of measurement to use for the
range and bandwidth fields, the values are not actually expected to be
in G or HZ, the code in bma150.c just uses the BMA150_RANGE_xxx and
BMA150_BW_xxx constants like they are with no translation from actual
values in G or HZ.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When PM_RUNTIME is not defined, pm_runtime_get_sync() returns 1, see
include/linux/pm_runtime.c::__pm_runtime_resume(), and the check of the
return value was overlooking this, in this case bma150_open() would
return 1 which is not expected by upper layers.
Maybe the check for != -ENOSYS (Function not implemented) was meant to
cover this, but pm_runtime_get_sync() does not return this value.
For now fix the issue locally by checking explicitly for negative return
values.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
