Commit Graph

632 Commits

Author SHA1 Message Date
Vladimir Oltean
ccb6ed426f net: mscc: ocelot: add port mirroring support using tc-matchall
Ocelot switches perform port-based ingress mirroring if
ANA:PORT:PORT_CFG field SRC_MIRROR_ENA is set, and egress mirroring if
the port is in ANA:ANA:EMIRRORPORTS.

Both ingress-mirrored and egress-mirrored frames are copied to the port
mask from ANA:ANA:MIRRORPORTS.

So the choice of limiting to a single mirror port via ocelot_mirror_get()
and ocelot_mirror_put() may seem bizarre, but the hardware model doesn't
map very well to the user space model. If the user wants to mirror the
ingress of swp1 towards swp2 and the ingress of swp3 towards swp4, we'd
have to program ANA:ANA:MIRRORPORTS with BIT(2) | BIT(4), and that would
make swp1 be mirrored towards swp4 too, and swp3 towards swp2. But there
are no tc-matchall rules to describe those actions.

Now, we could offload a matchall rule with multiple mirred actions, one
per desired mirror port, and force the user to stick to the multi-action
rule format for subsequent matchall filters. But both DSA and ocelot
have the flow_offload_has_one_action() check for the matchall offload,
plus the fact that it will get cumbersome to cross-check matchall
mirrors with flower mirrors (which will be added in the next patch).

As a result, we limit the configuration to a single mirror port, with
the possibility of lifting the restriction in the future.

Frames injected from the CPU don't get egress-mirrored, since they are
sent with the BYPASS bit in the injection frame header, and this
bypasses the analyzer module (effectively also the mirroring logic).
I don't know what to do/say about this.

Functionality was tested with:

tc qdisc add dev swp3 clsact
tc filter add dev swp3 ingress \
	matchall skip_sw \
	action mirred egress mirror dev swp1

and pinging through swp3, while seeing that the ICMP replies are
mirrored towards swp1.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17 17:42:46 -07:00
Vladimir Oltean
978777d0fb net: dsa: felix: configure default-prio and dscp priorities
Follow the established programming model for this driver and provide
shims in the felix DSA driver which call the implementations from the
ocelot switch lib. The ocelot switchdev driver wasn't integrated with
dcbnl due to lack of hardware availability.

The switch doesn't have any fancy QoS classification enabled by default.
The provided getters will create a default-prio app table entry of 0,
and no dscp entry. However, the getters have been made to actually
retrieve the hardware configuration rather than static values, to be
future proof in case DSA will need this information from more call paths.

For default-prio, there is a single field per port, in ANA_PORT_QOS_CFG,
called QOS_DEFAULT_VAL.

DSCP classification is enabled per-port, again via ANA_PORT_QOS_CFG
(field QOS_DSCP_ENA), and individual DSCP values are configured as
trusted or not through register ANA_DSCP_CFG (replicated 64 times).
An untrusted DSCP value falls back to other QoS classification methods.
If trusted, the selected ANA_DSCP_CFG register also holds the QoS class
in the QOS_DSCP_VAL field.

The hardware also supports DSCP remapping (DSCP value X is translated to
DSCP value Y before the QoS class is determined based on the app table
entry for Y) and DSCP packet rewriting. The dcbnl framework, for being
so flexible in other useless areas, doesn't appear to support this.
So this functionality has been left out.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-14 10:36:15 +00:00
Arnd Bergmann
d3d009847a AT91 SoC #2 for 5.18:
- SAMA5D29 variant to the SAMA5D2 family in SoC driver.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYiIhEwAKCRAfOrpwrNPN
 DFAlAP9xZajlf01HHkHuIYUY1yLwpIC+T/BhRWDx4K52frstAQEAhvSz47V9/v/l
 QkQGxuQyMjmihjFKh7+qVL8RgHZaPAc=
 =7HCW
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmInewAACgkQmmx57+YA
 GNkRuhAApqEF39tytJ7UHAhnjs+VxvYLQTP+ZBO6Dw0h/vG/sFWthG6sEJxgL8xv
 /ZOmDeABGB4+jsc9BXuBPV96sA6DkY2FKV0oHyOEvs0XsMU7Z4dmpTy/Zi1ji57O
 eKpqv4N2dEsqpq+JUTLHdTnTW5Gse8QHJ8krpNXx1J9k3acsEOupr2GfKfgqgy8C
 4m2Y+2LFsCrtO8fVXgVnxgIDdmvAoc8jbkPJ1V+pHPkh4c+Ar5B1FpsK8XIOKde/
 hvYQTJoPzSf5JAHZ5qZKQUMdQrTV9cdJLvwbR137e2soCHlkw4L7wNrhjW0rpTa8
 6NVhGbz6xX8Inars5+2XIsbaSWV/g7XVTNvwtM7FM9aV/S9T/AZajc1HjJ+Tk2Ad
 et4AicpiBh9/0l77VsxngukpsZ8JPBNEz5fPLK3awA/eCFWHtiiBApz9Hp4sO2qg
 25GJ0K0WAJSM27AbUCNjwYI/EQKqaZYvLq+k7jIMKXq5uX9lXwlAiG50kP8ZtvZb
 txKlZOYuqEHI5R7l5lTDkq7PL239fdBTb0M8G+uw65PY6HgwFarR7lvFFzAqFvMi
 Rx9eYLQhtP1d5sBOIUTATfHC9Qu+YpC1Sx9MHLyaU98V3TItTiD9YX6HRTFEaiv3
 CTYx/g1XvX37kxtVD3q8Ea4uolqpOR+Kt8tSWRz4faD4gIJxA0s=
 =bF4h
 -----END PGP SIGNATURE-----

Merge tag 'at91-soc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/drivers

AT91 SoC #2 for 5.18:

- SAMA5D29 variant to the SAMA5D2 family in SoC driver.

* tag 'at91-soc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: at91: add support in soc driver for new SAMA5D29
  soc: add microchip polarfire soc system controller
  ARM: at91: Kconfig: select PM_OPP
  ARM: at91: PM: add cpu idle support for sama7g5
  ARM: at91: ddr: fix typo to align with datasheet naming
  ARM: at91: ddr: align macro definitions
  ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency

Link: https://lore.kernel.org/r/20220304144216.23340-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-08 16:49:20 +01:00
Jakub Kicinski
80901bff81 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/batman-adv/hard-interface.c
  commit 690bb6fb64 ("batman-adv: Request iflink once in batadv-on-batadv check")
  commit 6ee3c393ee ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/

net/smc/af_smc.c
  commit 4d08b7b57e ("net/smc: Fix cleanup when register ULP fails")
  commit 462791bbfa ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03 11:55:12 -08:00
Vladimir Oltean
54c3198460 net: mscc: ocelot: enforce FDB isolation when VLAN-unaware
Currently ocelot uses a pvid of 0 for standalone ports and ports under a
VLAN-unaware bridge, and the pvid of the bridge for ports under a
VLAN-aware bridge. Standalone ports do not perform learning, but packets
received on them are still subject to FDB lookups. So if the MAC DA that
a standalone port receives has been also learned on a VLAN-unaware
bridge port, ocelot will attempt to forward to that port, even though it
can't, so it will drop packets.

So there is a desire to avoid that, and isolate the FDBs of different
bridges from one another, and from standalone ports.

The ocelot switch library has two distinct entry points: the felix DSA
driver and the ocelot switchdev driver.

We need to code up a minimal bridge_num allocation in the ocelot
switchdev driver too, this is copied from DSA with the exception that
ocelot does not care about DSA trees, cross-chip bridging etc. So it
only looks at its own ports that are already in the same bridge.

The ocelot switchdev driver uses the bridge_num it has allocated itself,
while the felix driver uses the bridge_num allocated by DSA. They are
both stored inside ocelot_port->bridge_num by the common function
ocelot_port_bridge_join() which receives the bridge_num passed by value.

Once we have a bridge_num, we can only use it to enforce isolation
between VLAN-unaware bridges. As far as I can see, ocelot does not have
anything like a FID that further makes VLAN 100 from a port be different
to VLAN 100 from another port with regard to FDB lookup. So we simply
deny multiple VLAN-aware bridges.

For VLAN-unaware bridges, we crop the 4000-4095 VLAN region and we
allocate a VLAN for each bridge_num. This will be used as the pvid of
each port that is under that VLAN-unaware bridge, for as long as that
bridge is VLAN-unaware.

VID 0 remains only for standalone ports. It is okay if all standalone
ports use the same VID 0, since they perform no address learning, the
FDB will contain no entry in VLAN 0, so the packets will always be
flooded to the only possible destination, the CPU port.

The CPU port module doesn't need to be member of the VLANs to receive
packets, but if we use the DSA tag_8021q protocol, those packets are
part of the data plane as far as ocelot is concerned, so there it needs
to. Just ensure that the DSA tag_8021q CPU port is a member of all
reserved VLANs when it is created, and is removed when it is deleted.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-27 11:06:14 +00:00
Tom Rix
fcfaff508b soc/tegra: bpmp: cleanup double word in comment
Remove the second 'or'.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-02-25 14:10:09 +01:00
Conor Dooley
d0054a470c soc: add microchip polarfire soc system controller
This driver provides an interface for other drivers to access the
functions of the system controller on the Microchip PolarFire SoC.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220217101349.2374873-2-conor.dooley@microchip.com
2022-02-25 12:50:59 +01:00
Claudiu Beznea
9584e7263e ARM: at91: PM: add cpu idle support for sama7g5
Add CPU idle support for SAMA7G5. Support will make use of PMC_CPU_RATIO
register to divide the CPU clock by 16 before switching it to idle and
use automatic self-refresh option of DDR controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-5-claudiu.beznea@microchip.com
2022-02-25 12:36:25 +01:00
Claudiu Beznea
9a0775c9cd ARM: at91: ddr: fix typo to align with datasheet naming
Fix typo on UDDRC_PWRCTL.SELFREF_SW bitmask to align with datasheet
naming.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-4-claudiu.beznea@microchip.com
2022-02-25 12:36:25 +01:00
Claudiu Beznea
55614e682a ARM: at91: ddr: align macro definitions
Align all macro definitions.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-3-claudiu.beznea@microchip.com
2022-02-25 12:36:25 +01:00
Claudiu Beznea
dc3005703f ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
Remove CONFIG_SOC_SAMA7 dependency to avoid having #ifdef preprocessor
directives in driver code (arch/arm/mach-at91/pm.c). This prepares the
code for next commits.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-2-claudiu.beznea@microchip.com
2022-02-25 12:36:25 +01:00
Vladimir Oltean
961d8b6990 net: dsa: felix: support FDB entries on offloaded LAG interfaces
This adds the logic in the Felix DSA driver and Ocelot switch library.
For Ocelot switches, the DEST_IDX that is the output of the MAC table
lookup is a logical port (equal to physical port, if no LAG is used, or
a dynamically allocated number otherwise). The allocation we have in
place for LAG IDs is different from DSA's, so we can't use that:
- DSA allocates a continuous range of LAG IDs starting from 1
- Ocelot appears to require that physical ports and LAG IDs are in the
  same space of [0, num_phys_ports), and additionally, ports that aren't
  in a LAG must have physical port id == logical port id

The implication is that an FDB entry towards a LAG might need to be
deleted and reinstalled when the LAG ID changes.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24 21:31:44 -08:00
Andy Shevchenko
988f0a9045 soc: fsl: Replace kernel.h with the necessary inclusions
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.

Replace kernel.h inclusion with the list of what is really being used.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2022-02-18 17:11:17 -06:00
Vladimir Oltean
9934800436 net: dsa: felix: update destinations of existing traps with ocelot-8021q
Historically, the felix DSA driver has installed special traps such that
PTP over L2 works with the ocelot-8021q tagging protocol; commit
0a6f17c6ae ("net: dsa: tag_ocelot_8021q: add support for PTP
timestamping") has the details.

Then the ocelot switch library also gained more comprehensive support
for PTP traps through commit 96ca08c058 ("net: mscc: ocelot: set up
traps for PTP packets").

Right now, PTP over L2 works using ocelot-8021q via the traps it has set
for itself, but nothing else does. Consolidating the two code blocks
would make ocelot-8021q gain support for PTP over L4 and tc-flower
traps, and at the same time avoid some code and TCAM duplication.

The traps are similar in intent, but different in execution, so some
explanation is required. The traps set up by felix_setup_mmio_filtering()
are VCAP IS1 filters, which have a PAG that chains them to a VCAP IS2
filter, and the IS2 is where the 'trap' action resides. The traps set up
by ocelot_trap_add(), on the other hand, have a single filter, in VCAP
IS2. The reason for chaining VCAP IS1 and IS2 in Felix was to ensure
that the hardcoded traps take precedence and cannot be overridden by the
Ocelot switch library.

So in principle, the PTP traps needed for ocelot-8021q in the Felix
driver can rely on ocelot_trap_add(), but the filters need to be patched
to account for a quirk that LS1028A has: the quirk_no_xtr_irq described
in commit 0a6f17c6ae ("net: dsa: tag_ocelot_8021q: add support for PTP
timestamping"). Live-patching is done by iterating through the trap list
every time we know it has been updated, and transforming a trap into a
redirect + CPU copy if ocelot-8021q is in use.

Making the DSA ocelot-8021q tagger work with the Ocelot traps means we
can eliminate the dedicated OCELOT_VCAP_IS1_TAG_8021Q_PTP_MMIO and
OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO cookies. To minimize the patch delta,
OCELOT_VCAP_IS2_MRP_TRAP takes the place of OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO
(the alternative would have been to left-shift all cookie numbers by 1).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17 14:06:51 +00:00
Vladimir Oltean
9d75b88185 net: mscc: ocelot: annotate which traps need PTP timestamping
The ocelot switch library does not need this information, but the felix
DSA driver does.

As a reminder, the VSC9959 switch in LS1028A doesn't have an IRQ line
for packet extraction, so to be notified that a PTP packet needs to be
dequeued, it receives that packet also over Ethernet, by setting up a
packet trap. The Felix driver needs to install special kinds of traps
for packets in need of RX timestamps, such that the packets are
replicated both over Ethernet and over the CPU port module.

But the Ocelot switch library sets up more than one trap for PTP event
messages; it also traps PTP general messages, MRP control messages etc.
Those packets don't need PTP timestamps, so there's no reason for the
Felix driver to send them to the CPU port module.

By knowing which traps need PTP timestamps, the Felix driver can
adjust the traps installed using ocelot_trap_add() such that only those
will actually get delivered to the CPU port module.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17 14:06:51 +00:00
Vladimir Oltean
e42bd4ed09 net: mscc: ocelot: keep traps in a list
When using the ocelot-8021q tagging protocol, the CPU port isn't
configured as an NPI port, but is a regular port. So a "trap to CPU"
operation is actually a "redirect" operation. So DSA needs to set up the
trapping action one way or another, depending on the tagging protocol in
use.

To ease DSA's work of modifying the action, keep all currently installed
traps in a list, so that DSA can live-patch them when the tagging
protocol changes.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17 14:06:51 +00:00
Vladimir Oltean
85ea0daabe net: mscc: ocelot: avoid overlap in VCAP IS2 between PTP and MRP traps
OCELOT_VCAP_IS2_TAG_8021Q_TXVLAN overlaps with OCELOT_VCAP_IS2_MRP_REDIRECT.
To avoid this, make OCELOT_VCAP_IS2_MRP_REDIRECT take the cookie region
from N to 2 * N - 1 (where N is ocelot->num_phys_ports).

To avoid any risk that the singleton (not per port) VCAP IS2 filters
overlap with per-port VCAP IS2 filters, we must ensure that the number
of singleton filters is smaller than the number of physical ports.
This is true right now, but may change in the future as switches with
less ports get supported, or more singleton filters get added. So to be
future-proof, let's move the singleton filters at the end of the range,
where they won't overlap with anything to their right.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17 14:06:51 +00:00
Vladimir Oltean
b9bace6e53 net: mscc: ocelot: use a single VCAP filter for all MRP traps
The MRP assist code installs a VCAP IS2 trapping rule for each port, but
since the key and the action is the same, just the ingress port mask
differs, there isn't any need to do this. We can save some space in the
TCAM by using a single filter and adjusting the ingress port mask.

Reuse the ocelot_trap_add() and ocelot_trap_del() functions for this
purpose.

Now that the cookies are no longer per port, we need to change the
allocation scheme such that MRP traps use a fixed number.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17 14:06:51 +00:00
Vladimir Oltean
36fac35b29 net: mscc: ocelot: delete OCELOT_MRP_CPUQ
MRP frames are configured to be trapped to the CPU queue 7, and this
number is reflected in the extraction header. However, the information
isn't used anywhere, so just leave MRP frames to go to CPU queue 0
unless needed otherwise.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17 14:06:51 +00:00
Vladimir Oltean
c518afec28 net: mscc: ocelot: consolidate cookie allocation for private VCAP rules
Every use case that needed VCAP filters (in order: DSA tag_8021q, MRP,
PTP traps) has hardcoded filter identifiers that worked well enough for
that use case alone. But when two or more of those use cases would be
used together, some of those identifiers would overlap, leading to
breakage.

Add definitions for each cookie and centralize them in ocelot_vcap.h,
such that the overlaps are more obvious.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17 14:06:51 +00:00
Colin Foster
d87b1c08f3 net: mscc: ocelot: use bulk reads for stats
Create and utilize bulk regmap reads instead of single access for gathering
stats. The background reading of statistics happens frequently, and over
a few contiguous memory regions.

High speed PCIe buses and MMIO access will probably see negligible
performance increase. Lower speed buses like SPI and I2C could see
significant performance increase, since the bus configuration and register
access times account for a large percentage of data transfer time.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14 13:24:29 +00:00
Colin Foster
40f3a5c815 net: mscc: ocelot: add ability to perform bulk reads
Regmap supports bulk register reads. Ocelot does not. This patch adds
support for Ocelot to invoke bulk regmap reads. That will allow any driver
that performs consecutive reads over memory regions to optimize that
access.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14 13:24:29 +00:00
Colin Foster
65c53595bc net: ocelot: align macros for consistency
In the ocelot.h file, several read / write macros were split across
multiple lines, while others weren't. Split all macros that exceed the 80
character column width and match the style of the rest of the file.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14 13:24:29 +00:00
Dave Airlie
53dbee4926 drm-misc-next for v5.18:
UAPI Changes:
 - Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
 
 Cross-subsystem Changes:
 - Assorted dt bindings updates.
 - Fix vga16fb vga checking on x86.
 - Fix extra semicolon in rwsem.h's _down_write_nest_lock.
 - Assorted small fixes to agp and fbdev drivers.
 - Fix oops in creating a udmabuf with 0 pages.
 - Hot-unplug firmware fb devices on forced removal
 - Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
 
 Core Changes:
 - Mock a drm_plane in drm-plane-helper selftest.
 - Assorted bug fixes to device logging, dbi.
 - Use DP helper for sink count in mst.
 - Assorted documentation fixes.
 - Assorted small fixes.
 - Move DP headers to drm/dp, and add a drm dp helper module.
 - Move the buddy allocator from i915 to common drm.
 - Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
 - Support microsoft extension for HMDs and specialized monitors.
 - Improve edid parser's deep color handling.
 - Add type 7 timing support to edid parser.
 - Add a weak backpointer to the ttm_bo from ttm_resource
 - Add 3 eDP panels.
 
 Driver Changes:
 - Add support for HDMI and JZ4780 to ingenic.
 - Add support for higher DP/eDP bitrates to nouveau.
 - Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
 - Convert and revert exynos dsi support to bridge driver.
 - Add vcc supply regulator support for sn65dsi83.
 - More conversion of bridge/chipone-icn6211 to atomic.
 - Remove conflicting fb's from stm, and add support for new hw version.
 - Add device link in parade-ps8640 to fix suspend/resume.
 - Update Boe-tv110c9m init sequence.
 - Add wide screen support to AST2600.
 - Fix omapdrm implicit dma_buf fencing.
 - Add support for multiple overlay planes to vkms.
 - Convert bridge/anx7625 to atomic, add HDCP support,
   add eld support for audio, and fix HPD.
 - Add driver for ChromeOS privacy screen.
 - Handover display from firmware to vc4 more gracefully, and support nomodeset.
 - Add flexible and ycbcr pixel formats to stm/ltdc.
 - Convert exynos mipi dsi to atomic.
 - Add initial dual core group GPUs support to panfrost.
 - No longer add exclusive fence in amdgpu as shared fence.
 - Add CSC and full range supoprt to vc4.
 - Shutdown the display on system shutdown and unbind.
 - Add Multi-Inno Technology MI0700S4T-6 simple panel.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmHyiHMACgkQ/lWMcqZw
 E8OLfQ//Xd1njt93nRGoQofuQkz23n2AUTAnmbwzQKcvmat8ugXbRJ5JaVQJrFpu
 OQEYM46eZIyu2LekMiz4HgPK8CjS156QJ1WtltUFglOY1KLejb6HF5boBYxLkIC7
 wLhkaRiwed4t7WOTrftgzpH5FNj/7Vi+Hav9l8rYRC74sWanEZNGBJL2OD9GRdlU
 3tlmY8oXVAN8YDD/43Cv+foOTzLS/COI7JCFgFRhfzoFss3EVR061u55uOq18STB
 UI29NusqX7/K6hQAWCKl0EQBEZWMR02/dgu3ZpOEHHAa96RgHxIuRYsIO9kvGgiF
 VyW0EW6AyD/KsOSBYnsfUqkFfNchx9Xb8ZDjIhHUYxPsxe4iUJneCrdIKEmLWgSd
 1bVNrltLJKBQARW4Whpy/gaiKV8RD8YVJobA/+/COeCUXCnNAT43O9aJmix/7253
 Q7ORXTss5WRpuYswMWmObebf8p3IhFjTvlzzenXynl7mkaohGzHPf6SUSUZbJ8Df
 PZCh17McwIEQ1BtYeegeAGM6s8lrv5+yZaY4bnkQsJNOHeab0cPqmQ8/s+hUeRtp
 3VDRVhkgzz2XuTaiKia0gWcAQbdZ2KornkP4QMyDH7w0+6bsuJnNXe4L1XY9lt4J
 5v411FaD61FbGDhu5PFtYI7+ZlgM0h5sqlhVkUEzbckzTF3SC9c=
 =IMtm
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2022-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

[airlied: add two missing Kconfig]

drm-misc-next for v5.18:

UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.

Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.

Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.

Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
  add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
2022-02-01 19:02:41 +10:00
Yong Wu
dbd171df8c media: memory: mtk-smi: Get rid of mtk_smi_larb_get/put
After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28 15:30:21 +01:00
Maxime Ripard
39feb6e726
firmware: raspberrypi: Add RPI_FIRMWARE_NOTIFY_DISPLAY_DONE
The RPI_FIRMWARE_NOTIFY_DISPLAY_DONE firmware call allows to tell the
firmware the kernel is in charge of the display now and the firmware can
free whatever resources it was using.

Acked-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-2-maxime@cerno.tech
2022-01-11 13:16:10 +01:00
Linus Torvalds
8efd0d9c31 Networking changes for 5.17.
Core
 ----
 
  - Defer freeing TCP skbs to the BH handler, whenever possible,
    or at least perform the freeing outside of the socket lock section
    to decrease cross-CPU allocator work and improve latency.
 
  - Add netdevice refcount tracking to locate sources of netdevice
    and net namespace refcount leaks.
 
  - Make Tx watchdog less intrusive - avoid pausing Tx and restarting
    all queues from a single CPU removing latency spikes.
 
  - Various small optimizations throughout the stack from Eric Dumazet.
 
  - Make netdev->dev_addr[] constant, force modifications to go via
    appropriate helpers to allow us to keep addresses in ordered data
    structures.
 
  - Replace unix_table_lock with per-hash locks, improving performance
    of bind() calls.
 
  - Extend skb drop tracepoint with a drop reason.
 
  - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
 
 BPF
 ---
 
  - New helpers:
    - bpf_find_vma(), find and inspect VMAs for profiling use cases
    - bpf_loop(), runtime-bounded loop helper trading some execution
      time for much faster (if at all converging) verification
    - bpf_strncmp(), improve performance, avoid compiler flakiness
    - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
      for tracing programs, all inlined by the verifier
 
  - Support BPF relocations (CO-RE) in the kernel loader.
 
  - Further the support for BTF_TYPE_TAG annotations.
 
  - Allow access to local storage in sleepable helpers.
 
  - Convert verifier argument types to a composable form with different
    attributes which can be shared across types (ro, maybe-null).
 
  - Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
    creating new, extensible ones where missing and deprecating those
    to be removed.
 
 Protocols
 ---------
 
  - WiFi (mac80211/cfg80211):
    - notify user space about long "come back in N" AP responses,
      allow it to react to such temporary rejections
    - allow non-standard VHT MCS 10/11 rates
    - use coarse time in airtime fairness code to save CPU cycles
 
  - Bluetooth:
    - rework of HCI command execution serialization to use a common
      queue and work struct, and improve handling errors reported
      in the middle of a batch of commands
    - rework HCI event handling to use skb_pull_data, avoiding packet
      parsing pitfalls
    - support AOSP Bluetooth Quality Report
 
  - SMC:
    - support net namespaces, following the RDMA model
    - improve connection establishment latency by pre-clearing buffers
    - introduce TCP ULP for automatic redirection to SMC
 
  - Multi-Path TCP:
    - support ioctls: SIOCINQ, OUTQ, and OUTQNSD
    - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
      IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
    - support cmsgs: TCP_INQ
    - improvements in the data scheduler (assigning data to subflows)
    - support fastclose option (quick shutdown of the full MPTCP
      connection, similar to TCP RST in regular TCP)
 
  - MCTP (Management Component Transport) over serial, as defined by
    DMTF spec DSP0253 - "MCTP Serial Transport Binding".
 
 Driver API
 ----------
 
  - Support timestamping on bond interfaces in active/passive mode.
 
  - Introduce generic phylink link mode validation for drivers which
    don't have any quirks and where MAC capability bits fully express
    what's supported. Allow PCS layer to participate in the validation.
    Convert a number of drivers.
 
  - Add support to set/get size of buffers on the Rx rings and size of
    the tx copybreak buffer via ethtool.
 
  - Support offloading TC actions as first-class citizens rather than
    only as attributes of filters, improve sharing and device resource
    utilization.
 
  - WiFi (mac80211/cfg80211):
    - support forwarding offload (ndo_fill_forward_path)
    - support for background radar detection hardware
    - SA Query Procedures offload on the AP side
 
 New hardware / drivers
 ----------------------
 
  - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
    real-time requirements for isochronous communication with protocols
    like OPC UA Pub/Sub.
 
  - Qualcomm BAM-DMUX WWAN - driver for data channels of modems
    integrated into many older Qualcomm SoCs, e.g. MSM8916 or
    MSM8974 (qcom_bam_dmux).
 
  - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
    driver with support for bridging, VLANs and multicast forwarding
    (lan966x).
 
  - iwlmei driver for co-operating between Intel's WiFi driver and
    Intel's Active Management Technology (AMT) devices.
 
  - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
 
  - Bluetooth:
    - MediaTek MT7921 SDIO devices
    - Foxconn MT7922A
    - Realtek RTL8852AE
 
 Drivers
 -------
 
  - Significantly improve performance in the datapaths of:
    lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
 
  - Intel Ethernet NICs:
    - igb: support PTP/time PEROUT and EXTTS SDP functions on
      82580/i354/i350 adapters
    - ixgbevf: new PF -> VF mailbox API which avoids the risk of
      mailbox corruption with ESXi
    - iavf: support configuration of VLAN features of finer granularity,
      stacked tags and filtering
    - ice: PTP support for new E822 devices with sub-ns precision
    - ice: support firmware activation without reboot
 
  - Mellanox Ethernet NICs (mlx5):
    - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
    - support TC forwarding when tunnel encap and decap happen between
      two ports of the same NIC
    - dynamically size and allow disabling various features to save
      resources for running in embedded / SmartNIC scenarios
 
  - Broadcom Ethernet NICs (bnxt):
    - use page frag allocator to improve Rx performance
    - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
 
  - Other Ethernet NICs:
    - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
 
  - Microsoft cloud/virtual NIC (mana):
    - add XDP support (PASS, DROP, TX)
 
  - Mellanox Ethernet switches (mlxsw):
    - initial support for Spectrum-4 ASICs
    - VxLAN with IPv6 underlay
 
  - Marvell Ethernet switches (prestera):
    - support flower flow templates
    - add basic IP forwarding support
 
  - NXP embedded Ethernet switches (ocelot & felix):
    - support Per-Stream Filtering and Policing (PSFP)
    - enable cut-through forwarding between ports by default
    - support FDMA to improve packet Rx/Tx to CPU
 
  - Other embedded switches:
    - hellcreek: improve trapping management (STP and PTP) packets
    - qca8k: support link aggregation and port mirroring
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - qca6390, wcn6855: enable 802.11 power save mode in station mode
    - BSS color change support
    - WCN6855 hw2.1 support
    - 11d scan offload support
    - scan MAC address randomization support
    - full monitor mode, only supported on QCN9074
    - qca6390/wcn6855: report signal and tx bitrate
    - qca6390: rfkill support
    - qca6390/wcn6855: regdb.bin support
 
  - Intel WiFi (iwlwifi):
    - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
      in cooperation with the BIOS
    - support for Optimized Connectivity Experience (OCE) scan
    - support firmware API version 68
    - lots of preparatory work for the upcoming Bz device family
 
  - MediaTek WiFi (mt76):
    - Specific Absorption Rate (SAR) support
    - mt7921: 160 MHz channel support
 
  - RealTek WiFi (rtw88):
    - Specific Absorption Rate (SAR) support
    - scan offload
 
  - Other WiFi NICs
    - ath10k: support fetching (pre-)calibration data from nvmem
    - brcmfmac: configure keep-alive packet on suspend
    - wcn36xx: beacon filter support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmHbkZAACgkQMUZtbf5S
 IruYkQ//XX7BggcwBfukPK83j0dONolClijqKcKR08g4vB5L8GXvv6OErKIWrh4k
 h8JanCH352ZkbCSw3MvFdm825UYQv8vPMd6Qks/LJ4aSKqCuy4MIlAo+yOw4Km3O
 i7++lRfma6DqHHI59wvLjWoxZSPu8lL+rI8UsZ5qMOlnNlGAOXsNrzRjaqQ3FddY
 AMxZeBUtrPqUCCQZFq3U8apkYzUp7CA/3XR9zRcja3uPbrtOV2G+4whRF90qGNWz
 Tm/QvJ9F/Ab292cbhxR4KuaQ3hUhaCQyDjbZk3+FZzZpAVhYTVqcNjny6+yXmbiP
 NXRtwemnl1NlWKMnJM8lEeY48u626tRIkxA/Wtd61uoO5uKUSxfGP+UpUi+DfXbF
 yIw50VQ7L2bpxXP/HjtmhVgZDaWKYyh22Zw4Hp/muMJz0hgUB0KODY3tf2jUWbjJ
 0oEgocWyzhhwMQKqupTDCIaRgIs2ewYr4ZrFDhI3HnHC/vv1VjoPRUPIyxwppD2N
 cXvZb3B1sWK8iX5gCbISGzyU4bB7I0rvJSTU42ueti7n6NqRFZ79qHQpYnnY+JdO
 z1qOwY/d/yWfBoXVKRtRg2qz6CdEt5BQklwAgVEBgrFpf58gp694EwGMb1htY14J
 r/k9bVpmyIFpUnBH2CPMRfBVA3tUTqzyzzFV4AMw40NYLKmhLdo=
 =KLm3
 -----END PGP SIGNATURE-----

Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Defer freeing TCP skbs to the BH handler, whenever possible, or at
     least perform the freeing outside of the socket lock section to
     decrease cross-CPU allocator work and improve latency.

   - Add netdevice refcount tracking to locate sources of netdevice and
     net namespace refcount leaks.

   - Make Tx watchdog less intrusive - avoid pausing Tx and restarting
     all queues from a single CPU removing latency spikes.

   - Various small optimizations throughout the stack from Eric Dumazet.

   - Make netdev->dev_addr[] constant, force modifications to go via
     appropriate helpers to allow us to keep addresses in ordered data
     structures.

   - Replace unix_table_lock with per-hash locks, improving performance
     of bind() calls.

   - Extend skb drop tracepoint with a drop reason.

   - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.

  BPF
  ---

   - New helpers:
      - bpf_find_vma(), find and inspect VMAs for profiling use cases
      - bpf_loop(), runtime-bounded loop helper trading some execution
        time for much faster (if at all converging) verification
      - bpf_strncmp(), improve performance, avoid compiler flakiness
      - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
        for tracing programs, all inlined by the verifier

   - Support BPF relocations (CO-RE) in the kernel loader.

   - Further the support for BTF_TYPE_TAG annotations.

   - Allow access to local storage in sleepable helpers.

   - Convert verifier argument types to a composable form with different
     attributes which can be shared across types (ro, maybe-null).

   - Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
     creating new, extensible ones where missing and deprecating those
     to be removed.

  Protocols
  ---------

   - WiFi (mac80211/cfg80211):
      - notify user space about long "come back in N" AP responses,
        allow it to react to such temporary rejections
      - allow non-standard VHT MCS 10/11 rates
      - use coarse time in airtime fairness code to save CPU cycles

   - Bluetooth:
      - rework of HCI command execution serialization to use a common
        queue and work struct, and improve handling errors reported in
        the middle of a batch of commands
      - rework HCI event handling to use skb_pull_data, avoiding packet
        parsing pitfalls
      - support AOSP Bluetooth Quality Report

   - SMC:
      - support net namespaces, following the RDMA model
      - improve connection establishment latency by pre-clearing buffers
      - introduce TCP ULP for automatic redirection to SMC

   - Multi-Path TCP:
      - support ioctls: SIOCINQ, OUTQ, and OUTQNSD
      - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
        IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
      - support cmsgs: TCP_INQ
      - improvements in the data scheduler (assigning data to subflows)
      - support fastclose option (quick shutdown of the full MPTCP
        connection, similar to TCP RST in regular TCP)

   - MCTP (Management Component Transport) over serial, as defined by
     DMTF spec DSP0253 - "MCTP Serial Transport Binding".

  Driver API
  ----------

   - Support timestamping on bond interfaces in active/passive mode.

   - Introduce generic phylink link mode validation for drivers which
     don't have any quirks and where MAC capability bits fully express
     what's supported. Allow PCS layer to participate in the validation.
     Convert a number of drivers.

   - Add support to set/get size of buffers on the Rx rings and size of
     the tx copybreak buffer via ethtool.

   - Support offloading TC actions as first-class citizens rather than
     only as attributes of filters, improve sharing and device resource
     utilization.

   - WiFi (mac80211/cfg80211):
      - support forwarding offload (ndo_fill_forward_path)
      - support for background radar detection hardware
      - SA Query Procedures offload on the AP side

  New hardware / drivers
  ----------------------

   - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
     real-time requirements for isochronous communication with protocols
     like OPC UA Pub/Sub.

   - Qualcomm BAM-DMUX WWAN - driver for data channels of modems
     integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
     (qcom_bam_dmux).

   - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
     with support for bridging, VLANs and multicast forwarding
     (lan966x).

   - iwlmei driver for co-operating between Intel's WiFi driver and
     Intel's Active Management Technology (AMT) devices.

   - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips

   - Bluetooth:
      - MediaTek MT7921 SDIO devices
      - Foxconn MT7922A
      - Realtek RTL8852AE

  Drivers
  -------

   - Significantly improve performance in the datapaths of: lan78xx,
     ax88179_178a, lantiq_xrx200, bnxt.

   - Intel Ethernet NICs:
      - igb: support PTP/time PEROUT and EXTTS SDP functions on
        82580/i354/i350 adapters
      - ixgbevf: new PF -> VF mailbox API which avoids the risk of
        mailbox corruption with ESXi
      - iavf: support configuration of VLAN features of finer
        granularity, stacked tags and filtering
      - ice: PTP support for new E822 devices with sub-ns precision
      - ice: support firmware activation without reboot

   - Mellanox Ethernet NICs (mlx5):
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
      - support TC forwarding when tunnel encap and decap happen between
        two ports of the same NIC
      - dynamically size and allow disabling various features to save
        resources for running in embedded / SmartNIC scenarios

   - Broadcom Ethernet NICs (bnxt):
      - use page frag allocator to improve Rx performance
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool

   - Other Ethernet NICs:
      - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support

   - Microsoft cloud/virtual NIC (mana):
      - add XDP support (PASS, DROP, TX)

   - Mellanox Ethernet switches (mlxsw):
      - initial support for Spectrum-4 ASICs
      - VxLAN with IPv6 underlay

   - Marvell Ethernet switches (prestera):
      - support flower flow templates
      - add basic IP forwarding support

   - NXP embedded Ethernet switches (ocelot & felix):
      - support Per-Stream Filtering and Policing (PSFP)
      - enable cut-through forwarding between ports by default
      - support FDMA to improve packet Rx/Tx to CPU

   - Other embedded switches:
      - hellcreek: improve trapping management (STP and PTP) packets
      - qca8k: support link aggregation and port mirroring

   - Qualcomm 802.11ax WiFi (ath11k):
      - qca6390, wcn6855: enable 802.11 power save mode in station mode
      - BSS color change support
      - WCN6855 hw2.1 support
      - 11d scan offload support
      - scan MAC address randomization support
      - full monitor mode, only supported on QCN9074
      - qca6390/wcn6855: report signal and tx bitrate
      - qca6390: rfkill support
      - qca6390/wcn6855: regdb.bin support

   - Intel WiFi (iwlwifi):
      - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
        in cooperation with the BIOS
      - support for Optimized Connectivity Experience (OCE) scan
      - support firmware API version 68
      - lots of preparatory work for the upcoming Bz device family

   - MediaTek WiFi (mt76):
      - Specific Absorption Rate (SAR) support
      - mt7921: 160 MHz channel support

   - RealTek WiFi (rtw88):
      - Specific Absorption Rate (SAR) support
      - scan offload

   - Other WiFi NICs
      - ath10k: support fetching (pre-)calibration data from nvmem
      - brcmfmac: configure keep-alive packet on suspend
      - wcn36xx: beacon filter support"

* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
  tcp: tcp_send_challenge_ack delete useless param `skb`
  net/qla3xxx: Remove useless DMA-32 fallback configuration
  rocker: Remove useless DMA-32 fallback configuration
  hinic: Remove useless DMA-32 fallback configuration
  lan743x: Remove useless DMA-32 fallback configuration
  net: enetc: Remove useless DMA-32 fallback configuration
  cxgb4vf: Remove useless DMA-32 fallback configuration
  cxgb4: Remove useless DMA-32 fallback configuration
  cxgb3: Remove useless DMA-32 fallback configuration
  bnx2x: Remove useless DMA-32 fallback configuration
  et131x: Remove useless DMA-32 fallback configuration
  be2net: Remove useless DMA-32 fallback configuration
  vmxnet3: Remove useless DMA-32 fallback configuration
  bna: Simplify DMA setting
  net: alteon: Simplify DMA setting
  myri10ge: Simplify DMA setting
  qlcnic: Simplify DMA setting
  net: allwinner: Fix print format
  page_pool: remove spinlock in page_pool_refill_alloc_cache()
  amt: fix wrong return type of amt_send_membership_update()
  ...
2022-01-10 19:06:09 -08:00
Linus Torvalds
e85195d5bf ARM: SoC driver updates for v5.17
There are cleanups and minor bugfixes across several SoC specific
 drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
 Renesas, ZynqMP
 
 Noteworthy new features are:
 
  - The op-tee firmware driver gains support for asynchronous
    notifications from secure-world firmware.
 
  - Qualcomm platforms gain support for new SoC types in various
    drivers: power domain, cache controller, RPM sleep, soc-info
 
  - Samsung SoC drivers gain support for new SoCs in ChipID and PMU,
    as well as a new USIv2 driver that handles various types of
    serial communiction (uart, i2c, spi)
 
  - Renesas adds support for R-Car S4-8 (R8A779F0) in multiple
    drivers, as well as memory controller support for RZ/G2L
    (R9A07G044).
 
  - Apple M1 gains support for the PMGR power management driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHDpK8ACgkQmmx57+YA
 GNmUqhAAnaxXJeu+dfWanrAAeH1MKju/uxB6bogtwrAc928BaqmeZfiAqsT9KsWu
 FhkWSGRu+y74fct4zkD3xfl0V2ROSrSjcvrWVu0GJPnXoOLKDZ1RbdZDnfXbwowa
 4urL5HeOtKYUpLjw7z8EQ43SHZba7CsiImGcF/4OtHW1hNGNIlU/Mym93lFT5Xdq
 HwDrktBWWVvBkCnxVGJjMwGGSCJbowIsPK8p8xr4CqML4Vdcx89qKB8cnCOg8Bgo
 YqzcJCTOY9K5qXI8D20GaTJCP5vCPxMgmeFn4LgWa+h9iJrt+g4J8zA1qGw92nwJ
 W2uRu/6YkCC2HMiyExuxkJNPKbFRbOqAm7lA/ZzuFpFU5RowACIrlwm4ZR/4UFDG
 fzrt3ZfNLRu33QxqhKY0jWGeHu729+RE2kpQ4FXveFmrtRIWnuX70/+NQFVhm+qy
 EBgXmlWNhTh2tcgfEzPja52+5h3SYKk6/J44266i/34x5eLDvmuRADzCVpLUmbPS
 G5UHVkWHZPJne6ZJQ+yz+o2h6BjcpCTvPRbt2/KkSOo9S0Qj4/XrOUHBAofy3odH
 Tdiba6lXMHZqvLlOOrMyJ0qdv26FJyJaSg5Wqhq45G1YCW5Xjc+cYzZggJBvBpIh
 thyN4b9jqfTnAZzKB6LCBUmEF2A7gXkuW9oXzNUkKtVzYluu1aQ=
 =tlZT
 -----END PGP SIGNATURE-----

Merge tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "There are cleanups and minor bugfixes across several SoC specific
  drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
  Renesas, ZynqMP

  Noteworthy new features are:

   - The op-tee firmware driver gains support for asynchronous
     notifications from secure-world firmware.

   - Qualcomm platforms gain support for new SoC types in various
     drivers: power domain, cache controller, RPM sleep, soc-info

   - Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
     well as a new USIv2 driver that handles various types of serial
     communiction (uart, i2c, spi)

   - Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
     as well as memory controller support for RZ/G2L (R9A07G044).

   - Apple M1 gains support for the PMGR power management driver"

* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
  soc: qcom: rpmh-rsc: Fix typo in a comment
  soc: qcom: socinfo: Add SM6350 and SM7225
  dt-bindings: arm: msm: Don't mark LLCC interrupt as required
  dt-bindings: firmware: scm: Add SM6350 compatible
  dt-bindings: arm: msm: Add LLCC for SM6350
  soc: qcom: rpmhpd: Sort power-domain definitions and lists
  soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
  soc: qcom: rpmhpd: Rename rpmhpd struct names
  soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
  soc: qcom: socinfo: add SM8450 ID
  soc: qcom: rpmhpd: Add SM8450 power domains
  dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
  soc: qcom: smem: Update max processor count
  dt-bindings: arm: qcom: Document SM8450 SoC and boards
  dt-bindings: firmware: scm: Add SM8450 compatible
  dt-bindings: arm: cpus: Add kryo780 compatible
  soc: qcom: rpmpd: Add support for sm6125
  dt-bindings: qcom-rpmpd: Add sm6125 power domains
  soc: qcom: aoss: constify static struct thermal_cooling_device_ops
  PM: AVS: qcom-cpr: Use div64_ul instead of do_div
  ...
2022-01-10 08:13:52 -08:00
Vladimir Oltean
5cad43a52e net: dsa: felix: add port fast age support
Add support for flushing the MAC table on a given port in the ocelot
switch library, and use this functionality in the felix DSA driver.

This operation is needed when a port leaves a bridge to become
standalone, and when the learning is disabled, and when the STP state
changes to a state where no FDB entry should be present.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220107144229.244584-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07 18:58:25 -08:00
Dmitry Osipenko
9131c63317 soc/tegra: Add devm_tegra_core_dev_init_opp_table_common()
Only couple drivers need to get the -ENODEV error code and majority of
drivers need to explicitly initialize the performance state. Add new
common helper which sets up OPP table for these drivers.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-16 14:03:38 +01:00
Clément Léger
753a026cfe net: ocelot: add FDMA support
Ethernet frames can be extracted or injected autonomously to or from
the device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list
data structures in memory are used for injecting or extracting Ethernet
frames. The FDMA generates interrupts when frame extraction or
injection is done and when the linked lists need updating.

The FDMA is shared between all the ethernet ports of the switch and
uses a linked list of descriptors (DCB) to inject and extract packets.
Before adding descriptors, the FDMA channels must be stopped. It would
be inefficient to do that each time a descriptor would be added so the
channels are restarted only once they stopped.

Both channels uses ring-like structure to feed the DCBs to the FDMA.
head and tail are never touched by hardware and are completely handled
by the driver. On top of that, page recycling has been added and is
mostly taken from gianfar driver.

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10 20:56:58 -08:00
Clément Léger
b471a71e52 net: ocelot: add and export ocelot_ptp_rx_timestamp()
In order to support PTP in FDMA, PTP handling code is needed. Since
this is the same as for register-based extraction, export it with
a new ocelot_ptp_rx_timestamp() function.

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10 20:56:57 -08:00
Clément Léger
e5150f0072 net: ocelot: export ocelot_ifh_port_set() to setup IFH
FDMA will need this code to prepare the injection frame header when
sending SKBs. Move this code into ocelot_ifh_port_set() and add
conditional IFH setting for vlan and rew op if they are not set.

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10 20:56:57 -08:00
Colin Foster
840ece19e9 net: ocelot: fix missed include in the vsc7514_regs.h file
commit 32ecd22ba6 ("net: mscc: ocelot: split register definitions to a
separate file") left out an include for <soc/mscc/ocelot_vcap.h>. It was
missed because the only consumer was ocelot_vsc7514.h, which already
included ocelot_vcap.

Fixes: 32ecd22ba6 ("net: mscc: ocelot: split register definitions to a separate file")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211209074010.1813010-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10 19:52:10 -08:00
Colin Foster
32ecd22ba6 net: mscc: ocelot: split register definitions to a separate file
Move these to a separate file will allow them to be shared to other
drivers.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-07 21:44:49 -08:00
Jakub Kicinski
93d5404e89 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ipa/ipa_main.c
  8afc7e471a ("net: ipa: separate disabling setup from modem stop")
  76b5fbcd6b ("net: ipa: kill ipa_modem_init()")

Duplicated include, drop one.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-26 13:45:19 -08:00
Vladimir Oltean
95706be13b net: mscc: ocelot: create a function that replaces an existing VCAP filter
VCAP (Versatile Content Aware Processor) is the TCAM-based engine behind
tc flower offload on ocelot, among other things. The ingress port mask
on which VCAP rules match is present as a bit field in the actual key of
the rule. This means that it is possible for a rule to be shared among
multiple source ports. When the rule is added one by one on each desired
port, that the ingress port mask of the key must be edited and rewritten
to hardware.

But the API in ocelot_vcap.c does not allow for this. For one thing,
ocelot_vcap_filter_add() and ocelot_vcap_filter_del() are not symmetric,
because ocelot_vcap_filter_add() works with a preallocated and
prepopulated filter and programs it to hardware, and
ocelot_vcap_filter_del() does both the job of removing the specified
filter from hardware, as well as kfreeing it. That is to say, the only
option of editing a filter in place, which is to delete it, modify the
structure and add it back, does not work because it results in
use-after-free.

This patch introduces ocelot_vcap_filter_replace, which trivially
reprograms a VCAP entry to hardware, at the exact same index at which it
existed before, without modifying any list or allocating any memory.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-26 11:38:20 -08:00
Vladimir Oltean
8abe197038 net: dsa: felix: enable cut-through forwarding between ports by default
The VSC9959 switch embedded within NXP LS1028A (and that version of
Ocelot switches only) supports cut-through forwarding - meaning it can
start the process of looking up the destination ports for a packet, and
forward towards those ports, before the entire packet has been received
(as opposed to the store-and-forward mode).

The up side is having lower forwarding latency for large packets. The
down side is that frames with FCS errors are forwarded instead of being
dropped. However, erroneous frames do not result in incorrect updates of
the FDB or incorrect policer updates, since these processes are deferred
inside the switch to the end of frame. Since the switch starts the
cut-through forwarding process after all packet headers (including IP,
if any) have been processed, packets with large headers and small
payload do not see the benefit of lower forwarding latency.

There are two cases that need special attention.

The first is when a packet is multicast (or flooded) to multiple
destinations, one of which doesn't have cut-through forwarding enabled.
The switch deals with this automatically by disabling cut-through
forwarding for the frame towards all destination ports.

The second is when a packet is forwarded from a port of lower link speed
towards a port of higher link speed. This is not handled by the hardware
and needs software intervention.

Since we practically need to update the cut-through forwarding domain
from paths that aren't serialized by the rtnl_mutex (phylink
mac_link_down/mac_link_up ops), this means we need to serialize physical
link events with user space updates of bonding/bridging domains.

Enabling cut-through forwarding is done per {egress port, traffic class}.
I don't see any reason why this would be a configurable option as long
as it works without issues, and there doesn't appear to be any user
space configuration tool to toggle this on/off, so this patch enables
cut-through forwarding on all eligible ports and traffic classes.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211125125808.2383984-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-25 19:32:07 -08:00
Xiaoliang Yang
a7e13edf37 net: dsa: felix: restrict psfp rules on ingress port
PSFP rules take effect on the streams from any port of VSC9959 switch.
This patch use ingress port to limit the rule only active on this port.

Each stream can only match two ingress source ports in VSC9959. Streams
from lowest port gets the configuration of SFID pointed by MAC Table
lookup and streams from highest port gets the configuration of (SFID+1)
pointed by MAC Table lookup. This patch defines the PSFP rule on highest
port as dummy rule, which means that it does not modify the MAC table.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18 12:07:24 +00:00
Xiaoliang Yang
77043c3709 net: mscc: ocelot: use index to set vcap policer
Policer was previously automatically assigned from the highest index to
the lowest index from policer pool. But police action of tc flower now
uses index to set an police entry. This patch uses the police index to
set vcap policers, so that one policer can be shared by multiple rules.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18 12:07:24 +00:00
Xiaoliang Yang
7d4b564d6a net: dsa: felix: support psfp filter on vsc9959
VSC9959 supports Per-Stream Filtering and Policing(PSFP) that complies
with the IEEE 802.1Qci standard. The stream is identified by Null stream
identification(DMAC and VLAN ID) defined in IEEE802.1CB.

For PSFP, four tables need to be set up: stream table, stream filter
table, stream gate table, and flow meter table. Identify the stream by
parsing the tc flower keys and add it to the stream table. The stream
filter table is automatically maintained, and its index is determined by
SGID(flow gate index) and FMID(flow meter index).

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18 12:07:24 +00:00
Xiaoliang Yang
23e2c506ad net: mscc: ocelot: add gate and police action offload to PSFP
PSFP support gate and police action. This patch add the gate and police
action to flower parse action, check chain ID to determine which block
to offload. Adding psfp callback functions to add, delete and update gate
and police in PSFP table if hardware supports it.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18 12:07:23 +00:00
Xiaoliang Yang
0568c3bf3f net: mscc: ocelot: add MAC table stream learn and lookup operations
ocelot_mact_learn_streamdata() can be used in VSC9959 to overwrite an
FDB entry with stream data. The stream data includes SFID and SSID which
can be used for PSFP and FRER set.

ocelot_mact_lookup() can be used to check if the given {DMAC, VID} FDB
entry is exist, and also can retrieve the DEST_IDX and entry type for
the FDB entry.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18 12:07:23 +00:00
Linus Torvalds
d461e96cd2 ARM: SoC drivers for 5.16
These are all the driver updates for SoC specific drivers. There
 are a couple of subsystems with individual maintainers picking up
 their patches here:
 
  - The reset controller subsystem add support for a few new SoC
    variants to existing drivers, along with other minor improvements
 
  - The OP-TEE subsystem gets a driver for the ARM FF-A transport
 
  - The memory controller subsystem has improvements for Tegra,
    Mediatek, Renesas, Freescale and Broadcom specific drivers.
 
  - The tegra cpuidle driver changes get merged through this
    tree this time. There are only minor changes, but they depend
    on other tegra driver updates here.
 
  - The ep93xx platform finally moves to using the drivers/clk/
    subsystem, moving the code out of arch/arm in the process.
    This depends on a small sound driver change that is included
    here as well.
 
  - There are some minor updates for Qualcomm and Tegra specific
    firmware drivers.
 
 The other driver updates are mainly for drivers/soc, which contains
 a mixture of vendor specific drivers that don't really fit elsewhere:
 
  - Mediatek drivers gain more support for MT8192, with new support for
    hw-mutex and mmsys routing, plus support for reset lines in the
    mmsys driver.
 
  - Qualcomm gains a new "sleep stats" driver, and support for
    the "Generic Packet Router" in the APR driver.
 
  - There is a new user interface for routing the UARTS on ASpeed
    BMCs, something that apparently nobody else has needed so far.
 
  - More drivers can now be built as loadable modules, in particular
    for Broadcom and Samsung platforms.
 
  - Lots of improvements to the TI sysc driver for better suspend/resume
    support
 
 Finally, there are lots of minor cleanups and new device IDs for
 amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
 allwinner, broadcom, and omap.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmGCvKgACgkQmmx57+YA
 GNnNfw/8DDTfMUycVvtaNslYlWri0/2O0nSqhNIIbTAcVuD/x5qo/McDhKuv+ldM
 BoTDMjRYZfQkrNXSEj3MaxB9E0o6Srva5SM8y4+Koe0VVtvEVovjYkXOhXqSEWWl
 aqVIe0S6Y1rF/KxJlvAfGxYHb5d+6aYqzdmhjURpXNGxqpSHb9/hqisY97Q9TpnD
 6lQZOz9d1JNDq0eOh1qjcfuMjg1EHZHDZJyioCvyX38KIl2q7p3ll2z/eqrrDhQZ
 TrvL/YVosTXqBcAfi47Oz+n/CX2i0MrjVO8nfPSGOq5UL4Al3SZD4XYY96IOIQrH
 +XGFigGGAkV2LfKSEPNJWaq7g+SiQUr2jc3p8b4Zxde8/+5M127/gotiPddyG2LX
 1OnFRnPskgRApGqHjGEcEzzJUTag7Hc+YVH82TMEHZhSDMq6i30k9UnyfXsziZDV
 8CrkOpjuSg+YxFv/83bfa1pIoYtFfjGr16mq4muajodnX7+b7My9iv+2Oo2iQM9y
 DwRUKj7+eap23SEUpi4et6HlNpoF6yJMbt5Ae1k+gTK2DvQ4Cx6n4QJz/I7WC1Wp
 BdVhvSH8XVppVLtQqODud+VWvLgLerRxUpGRdbS8r5VsnNUJTvaS4YGMpm9616G7
 TrgUSSvsyu1lLqbWMh+pOCk4l3r64vSUn581hrIw6jtioNGvMdE=
 =tUuj
 -----END PGP SIGNATURE-----

Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are all the driver updates for SoC specific drivers. There are a
  couple of subsystems with individual maintainers picking up their
  patches here:

   - The reset controller subsystem add support for a few new SoC
     variants to existing drivers, along with other minor improvements

   - The OP-TEE subsystem gets a driver for the ARM FF-A transport

   - The memory controller subsystem has improvements for Tegra,
     Mediatek, Renesas, Freescale and Broadcom specific drivers.

   - The tegra cpuidle driver changes get merged through this tree this
     time. There are only minor changes, but they depend on other tegra
     driver updates here.

   - The ep93xx platform finally moves to using the drivers/clk/
     subsystem, moving the code out of arch/arm in the process. This
     depends on a small sound driver change that is included here as
     well.

   - There are some minor updates for Qualcomm and Tegra specific
     firmware drivers.

  The other driver updates are mainly for drivers/soc, which contains a
  mixture of vendor specific drivers that don't really fit elsewhere:

   - Mediatek drivers gain more support for MT8192, with new support for
     hw-mutex and mmsys routing, plus support for reset lines in the
     mmsys driver.

   - Qualcomm gains a new "sleep stats" driver, and support for the
     "Generic Packet Router" in the APR driver.

   - There is a new user interface for routing the UARTS on ASpeed BMCs,
     something that apparently nobody else has needed so far.

   - More drivers can now be built as loadable modules, in particular
     for Broadcom and Samsung platforms.

   - Lots of improvements to the TI sysc driver for better
     suspend/resume support"

  Finally, there are lots of minor cleanups and new device IDs for
  amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
  layerscape, allwinner, broadcom, and omap"

* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
  optee: Fix spelling mistake "reclain" -> "reclaim"
  Revert "firmware: qcom: scm: Add support for MC boot address API"
  qcom: spm: allow compile-testing
  firmware: arm_ffa: Remove unused 'compat_version' variable
  soc: samsung: exynos-chipid: add exynosautov9 SoC support
  firmware: qcom: scm: Don't break compile test on non-ARM platforms
  soc: qcom: smp2p: Add of_node_put() before goto
  soc: qcom: apr: Add of_node_put() before return
  soc: qcom: qcom_stats: Fix client votes offset
  soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
  dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
  ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
  firmware: qcom: scm: Add support for MC boot address API
  soc: qcom: spm: Add 8916 SPM register data
  dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
  soc: qcom: socinfo: Add PM8150C and SMB2351 models
  firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
  soc: aspeed: Add UART routing support
  soc: fsl: dpio: rename the enqueue descriptor variable
  soc: fsl: dpio: use an explicit NULL instead of 0
  ...
2021-11-03 17:00:52 -07:00
Linus Torvalds
fc02cb2b37 Core:
- Remove socket skb caches
 
  - Add a SO_RESERVE_MEM socket op to forward allocate buffer space
    and avoid memory accounting overhead on each message sent
 
  - Introduce managed neighbor entries - added by control plane and
    resolved by the kernel for use in acceleration paths (BPF / XDP
    right now, HW offload users will benefit as well)
 
  - Make neighbor eviction on link down controllable by userspace
    to work around WiFi networks with bad roaming implementations
 
  - vrf: Rework interaction with netfilter/conntrack
 
  - fq_codel: implement L4S style ce_threshold_ect1 marking
 
  - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
 
 BPF:
 
  - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
    as implemented in LLVM14
 
  - Introduce bpf_get_branch_snapshot() to capture Last Branch Records
 
  - Implement variadic trace_printk helper
 
  - Add a new Bloomfilter map type
 
  - Track <8-byte scalar spill and refill
 
  - Access hw timestamp through BPF's __sk_buff
 
  - Disallow unprivileged BPF by default
 
  - Document BPF licensing
 
 Netfilter:
 
  - Introduce egress hook for looking at raw outgoing packets
 
  - Allow matching on and modifying inner headers / payload data
 
  - Add NFT_META_IFTYPE to match on the interface type either from
    ingress or egress
 
 Protocols:
 
  - Multi-Path TCP:
    - increase default max additional subflows to 2
    - rework forward memory allocation
    - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
 
  - MCTP flow support allowing lower layer drivers to configure msg
    muxing as needed
 
  - Automatic Multicast Tunneling (AMT) driver based on RFC7450
 
  - HSR support the redbox supervision frames (IEC-62439-3:2018)
 
  - Support for the ip6ip6 encapsulation of IOAM
 
  - Netlink interface for CAN-FD's Transmitter Delay Compensation
 
  - Support SMC-Rv2 eliminating the current same-subnet restriction,
    by exploiting the UDP encapsulation feature of RoCE adapters
 
  - TLS: add SM4 GCM/CCM crypto support
 
  - Bluetooth: initial support for link quality and audio/codec
    offload
 
 Driver APIs:
 
  - Add a batched interface for RX buffer allocation in AF_XDP
    buffer pool
 
  - ethtool: Add ability to control transceiver modules' power mode
 
  - phy: Introduce supported interfaces bitmap to express MAC
    capabilities and simplify PHY code
 
  - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
 
 New drivers:
 
  - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
 
  - Ethernet driver for ASIX AX88796C SPI device (x88796c)
 
 Drivers:
 
  - Broadcom PHYs
    - support 72165, 7712 16nm PHYs
    - support IDDQ-SR for additional power savings
 
  - PHY support for QCA8081, QCA9561 PHYs
 
  - NXP DPAA2: support for IRQ coalescing
 
  - NXP Ethernet (enetc): support for software TCP segmentation
 
  - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
    Gigabit-capable IP found on RZ/G2L SoC
 
  - Intel 100G Ethernet
    - support for eswitch offload of TC/OvS flow API, including
      offload of GRE, VxLAN, Geneve tunneling
    - support application device queues - ability to assign Rx and Tx
      queues to application threads
    - PTP and PPS (pulse-per-second) extensions
 
  - Broadcom Ethernet (bnxt)
    - devlink health reporting and device reload extensions
 
  - Mellanox Ethernet (mlx5)
    - offload macvlan interfaces
    - support HW offload of TC rules involving OVS internal ports
    - support HW-GRO and header/data split
    - support application device queues
 
  - Marvell OcteonTx2:
    - add XDP support for PF
    - add PTP support for VF
 
  - Qualcomm Ethernet switch (qca8k): support for QCA8328
 
  - Realtek Ethernet DSA switch (rtl8366rb)
    - support bridge offload
    - support STP, fast aging, disabling address learning
    - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
 
  - Mellanox Ethernet/IB switch (mlxsw)
    - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
    - offload root TBF qdisc as port shaper
    - support multiple routing interface MAC address prefixes
    - support for IP-in-IP with IPv6 underlay
 
  - MediaTek WiFi (mt76)
    - mt7921 - ASPM, 6GHz, SDIO and testmode support
    - mt7915 - LED and TWT support
 
  - Qualcomm WiFi (ath11k)
    - include channel rx and tx time in survey dump statistics
    - support for 80P80 and 160 MHz bandwidths
    - support channel 2 in 6 GHz band
    - spectral scan support for QCN9074
    - support for rx decapsulation offload (data frames in 802.3
      format)
 
  - Qualcomm phone SoC WiFi (wcn36xx)
    - enable Idle Mode Power Save (IMPS) to reduce power consumption
      during idle
 
  - Bluetooth driver support for MediaTek MT7922 and MT7921
 
  - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
    and Realtek 8822C/8852A
 
  - Microsoft vNIC driver (mana)
    - support hibernation and kexec
 
  - Google vNIC driver (gve)
    - support for jumbo frames
    - implement Rx page reuse
 
 Refactor:
 
  - Make all writes to netdev->dev_addr go thru helpers, so that we
    can add this address to the address rbtree and handle the updates
 
  - Various TCP cleanups and optimizations including improvements
    to CPU cache use
 
  - Simplify the gnet_stats, Qdisc stats' handling and remove
    qdisc->running sequence counter
 
  - Driver changes and API updates to address devlink locking
    deficiencies
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmGAzX4ACgkQMUZtbf5S
 IrvW3g//Q0ZLrOuHK9pZ8sCXMMhDj8qL6ajm0otMddHWA/+1UglwVBKFhsajfxOf
 wJ/5LZis+XKLpLqKTU5chKVfn39HuDGe/D3l+egi01Gv5BW0+XzEhagfyR5tJX5z
 wsGG5CXO/we/laVSzRiFtwwVEKHKN20YC+tIQwYOYP5Wy3q4G7qDsFhT7GqgsGCS
 n74QUEAIB5Tz0ODWFqLtbsySzIurXrskibwt5T9bvAAlPw/lCU68mmG+NVJ7VddO
 lBbNkLMOo8yW9Ci20H09SrYd4jZTmMARo9tsFO1tAvAMk7qpn0Wd8pnOYTjFFoMD
 +qjiFSVMh7E0JGb8Y7NCvwaB99suAK5rfGP68Xwe62DfP7vYWEx4pZGxBP19F4ld
 6Kn1ME33BX9rUF9tBecf0bdKfJUwB2Q2Xou/b9laG04bwiqsc9iG5FQq1C46lnLZ
 QdzNiS1My4dJMczkWt66HF3Kx30ibwHfvKMIHjf4PqkzEatkv6Y6SBZ57KXL+Lde
 0BQSFhbf0tm2Gf55etzrczLElI3uqHSFWUNZZ2Bt6WmzO1e6tpV9nAtRWF4C/dFg
 QDpLJtOOOY65uq+qz09zoPfv2lem868SrCAuFrVn99bEpYjx/CGNFDeEI02l6jyr
 84eUxd364UcbIk3fc+eTGdXHLQNVk30G0AHVBBxaWNIidwfqXeE=
 =srde
 -----END PGP SIGNATURE-----

Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Remove socket skb caches

   - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
     avoid memory accounting overhead on each message sent

   - Introduce managed neighbor entries - added by control plane and
     resolved by the kernel for use in acceleration paths (BPF / XDP
     right now, HW offload users will benefit as well)

   - Make neighbor eviction on link down controllable by userspace to
     work around WiFi networks with bad roaming implementations

   - vrf: Rework interaction with netfilter/conntrack

   - fq_codel: implement L4S style ce_threshold_ect1 marking

   - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()

  BPF:

   - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
     as implemented in LLVM14

   - Introduce bpf_get_branch_snapshot() to capture Last Branch Records

   - Implement variadic trace_printk helper

   - Add a new Bloomfilter map type

   - Track <8-byte scalar spill and refill

   - Access hw timestamp through BPF's __sk_buff

   - Disallow unprivileged BPF by default

   - Document BPF licensing

  Netfilter:

   - Introduce egress hook for looking at raw outgoing packets

   - Allow matching on and modifying inner headers / payload data

   - Add NFT_META_IFTYPE to match on the interface type either from
     ingress or egress

  Protocols:

   - Multi-Path TCP:
      - increase default max additional subflows to 2
      - rework forward memory allocation
      - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS

   - MCTP flow support allowing lower layer drivers to configure msg
     muxing as needed

   - Automatic Multicast Tunneling (AMT) driver based on RFC7450

   - HSR support the redbox supervision frames (IEC-62439-3:2018)

   - Support for the ip6ip6 encapsulation of IOAM

   - Netlink interface for CAN-FD's Transmitter Delay Compensation

   - Support SMC-Rv2 eliminating the current same-subnet restriction, by
     exploiting the UDP encapsulation feature of RoCE adapters

   - TLS: add SM4 GCM/CCM crypto support

   - Bluetooth: initial support for link quality and audio/codec offload

  Driver APIs:

   - Add a batched interface for RX buffer allocation in AF_XDP buffer
     pool

   - ethtool: Add ability to control transceiver modules' power mode

   - phy: Introduce supported interfaces bitmap to express MAC
     capabilities and simplify PHY code

   - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks

  New drivers:

   - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)

   - Ethernet driver for ASIX AX88796C SPI device (x88796c)

  Drivers:

   - Broadcom PHYs
      - support 72165, 7712 16nm PHYs
      - support IDDQ-SR for additional power savings

   - PHY support for QCA8081, QCA9561 PHYs

   - NXP DPAA2: support for IRQ coalescing

   - NXP Ethernet (enetc): support for software TCP segmentation

   - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
     Gigabit-capable IP found on RZ/G2L SoC

   - Intel 100G Ethernet
      - support for eswitch offload of TC/OvS flow API, including
        offload of GRE, VxLAN, Geneve tunneling
      - support application device queues - ability to assign Rx and Tx
        queues to application threads
      - PTP and PPS (pulse-per-second) extensions

   - Broadcom Ethernet (bnxt)
      - devlink health reporting and device reload extensions

   - Mellanox Ethernet (mlx5)
      - offload macvlan interfaces
      - support HW offload of TC rules involving OVS internal ports
      - support HW-GRO and header/data split
      - support application device queues

   - Marvell OcteonTx2:
      - add XDP support for PF
      - add PTP support for VF

   - Qualcomm Ethernet switch (qca8k): support for QCA8328

   - Realtek Ethernet DSA switch (rtl8366rb)
      - support bridge offload
      - support STP, fast aging, disabling address learning
      - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch

   - Mellanox Ethernet/IB switch (mlxsw)
      - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
      - offload root TBF qdisc as port shaper
      - support multiple routing interface MAC address prefixes
      - support for IP-in-IP with IPv6 underlay

   - MediaTek WiFi (mt76)
      - mt7921 - ASPM, 6GHz, SDIO and testmode support
      - mt7915 - LED and TWT support

   - Qualcomm WiFi (ath11k)
      - include channel rx and tx time in survey dump statistics
      - support for 80P80 and 160 MHz bandwidths
      - support channel 2 in 6 GHz band
      - spectral scan support for QCN9074
      - support for rx decapsulation offload (data frames in 802.3
        format)

   - Qualcomm phone SoC WiFi (wcn36xx)
      - enable Idle Mode Power Save (IMPS) to reduce power consumption
        during idle

   - Bluetooth driver support for MediaTek MT7922 and MT7921

   - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
     Realtek 8822C/8852A

   - Microsoft vNIC driver (mana)
      - support hibernation and kexec

   - Google vNIC driver (gve)
      - support for jumbo frames
      - implement Rx page reuse

  Refactor:

   - Make all writes to netdev->dev_addr go thru helpers, so that we can
     add this address to the address rbtree and handle the updates

   - Various TCP cleanups and optimizations including improvements to
     CPU cache use

   - Simplify the gnet_stats, Qdisc stats' handling and remove
     qdisc->running sequence counter

   - Driver changes and API updates to address devlink locking
     deficiencies"

* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
  Revert "net: avoid double accounting for pure zerocopy skbs"
  selftests: net: add arp_ndisc_evict_nocarrier
  net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
  net: arp: introduce arp_evict_nocarrier sysctl parameter
  libbpf: Deprecate AF_XDP support
  kbuild: Unify options for BTF generation for vmlinux and modules
  selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
  bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
  bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
  net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
  net: avoid double accounting for pure zerocopy skbs
  tcp: rename sk_wmem_free_skb
  netdevsim: fix uninit value in nsim_drv_configure_vfs()
  selftests/bpf: Fix also no-alu32 strobemeta selftest
  bpf: Add missing map_delete_elem method to bloom filter map
  selftests/bpf: Add bloom map success test for userspace calls
  bpf: Add alignment padding for "map_extra" + consolidate holes
  bpf: Bloom filter map naming fixups
  selftests/bpf: Add test cases for struct_ops prog
  bpf: Add dummy BPF STRUCT_OPS for test purpose
  ...
2021-11-02 06:20:58 -07:00
Linus Torvalds
57a315cd71 Time, timers and timekeeping updates:
- No core updates
 
   - No new clocksource/event driver
 
   - A large rework of the ARM architected timer driver to prepare for the
     support of the upcoming ARMv8.6 support
 
   - Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers
 
   - Address a namespace collison in the ARC sp804 timer driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmF/IPsTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoXztEACE15PRW/s3dsKjsX4HgZocPS3WSeBx
 Nim90LHLWA8hiN3LdY5PmyB5lWHFPojCNtnnnA3hAAasalxtxu00XUwMx11Ewf7C
 HDpYvW4Pp3QHFH9i45nxVJ/2bhiL7g8cpvYNrXuk2rVkZnBf13LGqD4IUJbts/gY
 X+T0NTDHFNjJjbabuD4LVsfKkerPPJawYtL6EnFn8hkZwMKVY2Mq0xw6fCzA7qGy
 JbBkt0Or5k7imruq3uob9V+IscmkcPRxrP1JOgJLbzCbax+bpz2SL1nZxm5NAeol
 Hdxx+bP2PnpoCsq6GnN3q17nvr8PEOeEQ02AcZ/5IpExIfBnIDahJ61KA8Ao6WGm
 xvVY4fIG6nqul6LMqoAyVc0BeG4Mc7u3D12f+1/UE9pmYbMEM5TcHRbxg0QgTauF
 R78xc5P5v+B2LcUTE9/czJlaCZQuAF+4N60Lnt+aW0Ahsa0h+O2vrX1rBOC3d4US
 12xexkAimMS8VvmuD5wSPE9JrBMDZraJuDM3G+5cwOjXIG8VFXOSloOn/9BhWFEM
 c0scefsGFxENDwkd3d6PmGfrtxSOnqAzhvxgRyJ9zql9wX6LDOa6s2HXKxdSXEL8
 N18WTWsC0Ps60XLlH9CQrBj/T0YnKpOazMx0LIFLPFqEkoSkEjq1j3KgDnSQQ4uE
 J4c2UU4M8FnMlg==
 =SVx3
 -----END PGP SIGNATURE-----

Merge tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Time, timers and timekeeping updates:

   - No core updates

   - No new clocksource/event driver

   - A large rework of the ARM architected timer driver to prepare for
     the support of the upcoming ARMv8.6 support

   - Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers

   - Address a namespace collison in the ARC sp804 timer driver"

* tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/timer-ti-dm: Select TIMER_OF
  clocksource/drivers/exynosy: Depend on sub-architecture for Exynos MCT and Samsung PWM
  clocksource/drivers/arch_arm_timer: Move workaround synchronisation around
  clocksource/drivers/arm_arch_timer: Fix masking for high freq counters
  clocksource/drivers/arm_arch_timer: Drop unnecessary ISB on CVAL programming
  clocksource/drivers/arm_arch_timer: Remove any trace of the TVAL programming interface
  clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations
  clocksource/drivers/arm_arch_timer: Advertise 56bit timer to the core code
  clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL
  clocksource/drivers/arm_arch_timer: Fix MMIO base address vs callback ordering issue
  clocksource/drivers/arm_arch_timer: Move drop _tval from erratum function names
  clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL
  clocksource/drivers/arm_arch_timer: Extend write side of timer register accessors to u64
  clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessors
  clocksource/arm_arch_timer: Add build-time guards for unhandled register accesses
  clocksource/drivers/arc_timer: Eliminate redefined macro error
2021-11-01 13:44:55 -07:00
Vladimir Oltean
2468346c56 net: mscc: ocelot: serialize access to the MAC table
DSA would like to remove the rtnl_lock from its
SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE handlers, and the felix driver uses
the same MAC table functions as ocelot.

This means that the MAC table functions will no longer be implicitly
serialized with respect to each other by the rtnl_mutex, we need to add
a dedicated lock in ocelot for the non-atomic operations of selecting a
MAC table row, reading/writing what we want and polling for completion.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25 12:59:41 +01:00
David S. Miller
2d7e73f09f Revert "Merge branch 'dsa-rtnl'"
This reverts commit 965e6b262f, reversing
changes made to 4d98bb0d7e.
2021-10-25 12:59:25 +01:00
Vladimir Oltean
f2c4bdf62d net: mscc: ocelot: serialize access to the MAC table
DSA would like to remove the rtnl_lock from its
SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE handlers, and the felix driver uses
the same MAC table functions as ocelot.

This means that the MAC table functions will no longer be implicitly
serialized with respect to each other by the rtnl_mutex, we need to add
a dedicated lock in ocelot for the non-atomic operations of selecting a
MAC table row, reading/writing what we want and polling for completion.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24 13:47:44 +01:00
Vladimir Oltean
d4004422f6 net: mscc: ocelot: track the port pvid using a pointer
Now that we have a list of struct ocelot_bridge_vlan entries, we can
rewrite the pvid logic to simply point to one of those structures,
instead of having a separate structure with a "bool valid".
The NULL pointer will represent the lack of a bridge pvid (not to be
confused with the lack of a hardware pvid on the port, that is present
at all times).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21 12:14:29 +01:00
Vladimir Oltean
0da1a1c489 net: mscc: ocelot: allow a config where all bridge VLANs are egress-untagged
At present, the ocelot driver accepts a single egress-untagged bridge
VLAN, meaning that this sequence of operations:

ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0
bridge vlan add dev swp0 vid 2 pvid untagged

fails because the bridge automatically installs VID 1 as a pvid & untagged
VLAN, and vid 2 would be the second untagged VLAN on this port. It is
necessary to delete VID 1 before proceeding to add VID 2.

This limitation comes from the fact that we operate the port tag, when
it has an egress-untagged VID, in the OCELOT_PORT_TAG_NATIVE mode.
The ocelot switches do not have full flexibility and can either have one
single VID as egress-untagged, or all of them.

There are use cases for having all VLANs as egress-untagged as well, and
this patch adds support for that.

The change rewrites ocelot_port_set_native_vlan() into a more generic
ocelot_port_manage_port_tag() function. Because the software bridge's
state, transmitted to us via switchdev, can become very complex, we
don't attempt to track all possible state transitions, but instead take
a more declarative approach and just make ocelot_port_manage_port_tag()
figure out which more to operate in:

- port is VLAN-unaware: the classified VLAN (internal, unrelated to the
                        802.1Q header) is not inserted into packets on egress
- port is VLAN-aware:
  - port has tagged VLANs:
    -> port has no untagged VLAN: set up as pure trunk
    -> port has one untagged VLAN: set up as trunk port + native VLAN
    -> port has more than one untagged VLAN: this is an invalid config
       which is rejected by ocelot_vlan_prepare
  - port has no tagged VLANs
    -> set up as pure egress-untagged port

We don't keep the number of tagged and untagged VLANs, we just count the
structures we keep.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21 12:14:29 +01:00
Vladimir Oltean
90e0aa8d10 net: mscc: ocelot: convert the VLAN masks to a list
First and foremost, the driver currently allocates a constant sized
4K * u32 (16KB memory) array for the VLAN masks. However, a typical
application might not need so many VLANs, so if we dynamically allocate
the memory as needed, we might actually save some space.

Secondly, we'll need to keep more advanced bookkeeping of the VLANs we
have, notably we'll have to check how many untagged and how many tagged
VLANs we have. This will have to stay in a structure, and allocating
another 16 KB array for that is again a bit too much.

So refactor the bridge VLANs in a linked list of structures.

The hook points inside the driver are ocelot_vlan_member_add() and
ocelot_vlan_member_del(), which previously used to operate on the
ocelot->vlan_mask[vid] array element.

ocelot_vlan_member_add() and ocelot_vlan_member_del() used to call
ocelot_vlan_member_set() to commit to the ocelot->vlan_mask.
Additionally, we had two calls to ocelot_vlan_member_set() from outside
those callers, and those were directly from ocelot_vlan_init().
Those calls do not set up bridging service VLANs, instead they:

- clear the VLAN table on reset
- set the port pvid to the value used by this driver for VLAN-unaware
  standalone port operation (VID 0)

So now, when we have a structure which represents actual bridge VLANs,
VID 0 doesn't belong in that structure, since it is not part of the
bridging layer.

So delete the middle man, ocelot_vlan_member_set(), and let
ocelot_vlan_init() call directly ocelot_vlant_set_mask() which forgoes
any data structure and writes directly to hardware, which is all that we
need.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21 12:14:29 +01:00
Vladimir Oltean
62a22bcbd3 net: mscc: ocelot: add a type definition for REW_TAG_CFG_TAG_CFG
This is a cosmetic patch which clarifies what are the port tagging
options for Ocelot switches.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21 12:14:29 +01:00
Randy Dunlap
58100c34f7 clocksource/drivers/arc_timer: Eliminate redefined macro error
In drivers/clocksource/, 3 drivers use "TIMER_CTRL_IE" with 3 different
values.  Two of them (mps2-timer.c and timer-sp804.c/timer-sp.h) are
localized and left unmodifed.

One of them uses a shared header file (<soc/arc/timers.h>), which is
what is causing the "redefined" warnings, so change the macro name in
that driver only. Also change the TIMER_CTRL_NH macro name.
Both macro names are prefixed with "ARC_" to reduce the likelihood
of future name collisions.

In file included from ../drivers/clocksource/timer-sp804.c:24:
../drivers/clocksource/timer-sp.h:25: error: "TIMER_CTRL_IE" redefined [-Werror]
   25 | #define TIMER_CTRL_IE           (1 << 5)        /*   VR */
../include/soc/arc/timers.h:20: note: this is the location of the previous definition
   20 | #define TIMER_CTRL_IE           (1 << 0) /* Interrupt when Count reaches limit */

Fixes: b26c2e3823 ("ARC: breakout timer include code into separate header")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210924020825.20317-1-rdunlap@infradead.org
2021-10-16 22:15:01 +02:00
Ioana Ciornei
69651bd8d3 soc: fsl: dpio: add Net DIM integration
Use the generic dynamic interrupt moderation (dim) framework to
implement adaptive interrupt coalescing on Rx. With the per-packet
interrupt scheme, a high interrupt rate has been noted for moderate
traffic flows leading to high CPU utilization.

The dpio driver exports new functions to enable/disable adaptive IRQ
coalescing on a DPIO object, to query the state or to update Net DIM
with a new set of bytes and frames dequeued.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15 14:32:41 +01:00
Ioana Ciornei
ed1d2143fe soc: fsl: dpio: add support for irq coalescing per software portal
In DPAA2 based SoCs, the IRQ coalesing support per software portal has 2
configurable parameters:
 - the IRQ timeout period (QBMAN_CINH_SWP_ITPR): how many 256 QBMAN
   cycles need to pass until a dequeue interrupt is asserted.
 - the IRQ threshold (QBMAN_CINH_SWP_DQRR_ITR): how many dequeue
   responses in the DQRR ring would generate an IRQ.

Add support for setting up and querying these IRQ coalescing related
parameters.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15 14:32:40 +01:00
Ioana Ciornei
2cf0b6fe9b soc: fsl: dpio: extract the QBMAN clock frequency from the attributes
Through the dpio_get_attributes() firmware call the dpio driver has
access to the QBMAN clock frequency. Extend the structure which holds
the firmware's response so that we can have access to this information.

This will be needed in the next patches which also add support for
interrupt coalescing which needs to be configured based on the
frequency.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15 14:32:40 +01:00
Jakub Kicinski
e15f5972b8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
tools/testing/selftests/net/ioam6.sh
  7b1700e009 ("selftests: net: modify IOAM tests for undef bits")
  bf77b1400a ("selftests: net: Test for the IOAM encapsulation with IPv6")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14 16:50:14 -07:00
Arnd Bergmann
936fc53f3d Qualcomm driver updates for v5.16
This drops the use of power-domains for exposing the load_state from the
 QMP driver to clients, to avoid issues related to system suspend.
 
 SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
 Linux from suspend to perform recovery.
 
 It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
 support for MSM8953 and QCM2290.
 
 It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
 will enable the introduction of proper voltage scaling of the CPU
 subsystem.
 
 Support for releasing secondary CPUs on MSM8226 is introduced.
 
 The Asynchronous Packet Router (APR) driver is extended to support the
 new Generic Packet Router (GPR) variant, which is used to communicate
 with the firmware in the new AudioReach audio driver.
 
 Lastly it transitions a number of drivers to safer string functions, as
 well as switching things to use devm_platform_ioremap_resource().
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmFlxugbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F3A0P/ixLiu0XktPOyFZ+3Ag/
 5KKan6wlH8JO0AfxbOolk0MkC1/8uk1V+Kuw4b/22jTO4w/9Illi9jSmV0wR3IBh
 26sWpyxNK7N+7uAnBDqlZekQYTg5xKqJGn69kxe0oIm8yAogGkxZnlIWt7JGtWS0
 NcyLLe9gS/B/q6ppTkxlYhSMB3Qp6bU/lRjBWTcHlxaNxGyNbGw4zp5ncze8ui9R
 s0JdFhJ/T1ptuWuIhrEWXEVapQtf0pgPvYSWxRYoBRU4N1F4HcRcLVpUU6eSvFEg
 BKxN11dCW4o0njLBpdPtg3u7AL31A95OPFiVwpWEb6Wov1DAdQYfYSoc7r2uqKvL
 QgvE/Fq1uPNPsFH2AgJjmku7nb2S0UP2msIhsZjugwxCQXtHgv2uPdYSN/MOudEZ
 MdjbbAHKW9+TR4gTVzA7b7OVzB73+tjHo/4hUjy8J5RlRKujbzHHXLRjvpNAILqn
 y457eUFqYxR1C3CKy2GrgR/PvNcBdDVq0ikuv4elYZEIaPL/Wxg6V7RJSHzgAgU/
 7XArrGvCXdLXy/e07KJ4Su74OBOsXnqLLr+Xsw5+h42XCnDfmI3caQlQjTXxJxN4
 EifHOoPCa8JNtXzWKSBSO7Pb5teSYh5XlAQs8nGVbrKMhly/MDLeNzSL+uu8DGNw
 B9Cf/mM9bhs3Q69Z37WgOdK0
 =FE4j
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFnQuMACgkQmmx57+YA
 GNk90g/9F5Sh8wfMQ3WYZMu10L431dXYKkafccK8SFgNhTxTuJ7xPbJzXxFQW6Qp
 Ky0DAKcJB/tW/jCMh7L/d7pET4tedRncZd6Pk8kkn8uRC9qiTEFyPKP+4trADnhw
 Q/gf8xbEJz13aDzFbfW2Ko9Rx0HJQ/BSWVzZ5fpkUmoSSBnxm+rq9T3e10BNX1QT
 /Bg1M77zyYWtlPKexjxBEz7EZuQIEmN9gkCCriYTMw34hfVYszsNkIZnIGfe/wAa
 F6iSjIwVqf4DbM6QzabNoCUzZf50Ij4Vdlhvk5FUt3quPIvcULzIxQxI3o/J5sJ2
 2mowPuiVjmqx4R8XFILod0+KU4NNUGcb2YFLZg+XjbopArfLZaa2OV40m2QDY/Ay
 /BHXBtxLDDcDqwOX6Y7NEfbNFUqLlFv00vuZEJ9KT/19ZfJgCw4qoxw44aldjQEo
 3pvEACOHLKoI+FOeb6LHL0erfc1jz/qul37oWI361rDIfWsWsZtbyc+gItMDLGYa
 C1qUHoP5vMmse0tILT6AJNR23aGJFapKkzTNWB6j5Pi/0sdv3zGbhxubf+TxMRtx
 5BhEP2N5pHdKVopxVSG2JVOtT12jE68tV0E00erEoPIG35C+DyADn5i9lg4g20Ix
 MwxwtgAC0cws8tpwsDvFOCj8SPn9HDtEGMJMejo5xuEIxqjAb2E=
 =LLU7
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.16

This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.

SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.

It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.

It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.

Support for releasing secondary CPUs on MSM8226 is introduced.

The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.

Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().

* tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
  soc: qcom: apr: Add GPR support
  soc: dt-bindings: qcom: add gpr bindings
  soc: qcom: apr: make code more reuseable
  soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
  soc: dt-bindings: qcom: apr: convert to yaml
  dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
  dt-bindings: msm/dp: Remove aoss-qmp header
  soc: qcom: aoss: Drop power domain support
  dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
  dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding
  dt-bindings: soc: qcom: aoss: Add SM6350 compatible
  soc: qcom: llcc: Disable MMUHWT retention
  soc: qcom: smd-rpm: Add QCM2290 compatible
  dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible
  firmware: qcom_scm: Add compatible for MSM8953 SoC
  dt-bindings: firmware: qcom-scm: Document msm8953 bindings
  soc: qcom: pdr: Prefer strscpy over strcpy
  soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname()
  soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource()
  ...

Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-13 22:34:43 +02:00
Vladimir Oltean
49f885b2d9 net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib
Michael reported that when using the "ocelot-8021q" tagging protocol,
the switch driver module must be manually loaded before the tagging
protocol can be loaded/is available.

This appears to be the same problem described here:
https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
where due to the fact that DSA tagging protocols make use of symbols
exported by the switch drivers, circular dependencies appear and this
breaks module autoloading.

The ocelot_8021q driver needs the ocelot_can_inject() and
ocelot_port_inject_frame() functions from the switch library. Previously
the wrong approach was taken to solve that dependency: shims were
provided for the case where the ocelot switch library was compiled out,
but that turns out to be insufficient, because the dependency when the
switch lib _is_ compiled is problematic too.

We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as
static inline functions, because these access I/O functions like
__ocelot_write_ix() which is called by ocelot_write_rix(). Making those
static inline basically means exposing the whole guts of the ocelot
switch library, not ideal...

We already have one tagging protocol driver which calls into the switch
driver during xmit but not using any exported symbol: sja1105_defer_xmit.
We can do the same thing here: create a kthread worker and one work item
per skb, and let the switch driver itself do the register accesses to
send the skb, and then consume it.

Fixes: 0a6f17c6ae ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12 17:35:18 -07:00
Vladimir Oltean
deab6b1cd9 net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver
As explained here:
https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
DSA tagging protocol drivers cannot depend on symbols exported by switch
drivers, because this creates a circular dependency that breaks module
autoloading.

The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function
exported by the common ocelot switch lib. This function looks at
OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the
DSA tag, for PTP timestamping (the command: one-step/two-step, and the
TX timestamp identifier).

None of that requires deep insight into the driver, it is quite
stateless, as it only depends upon the skb->cb. So let's make it a
static inline function and put it in include/linux/dsa/ocelot.h, a
file that despite its name is used by the ocelot switch driver for
populating the injection header too - since commit 40d3f295b5 ("net:
mscc: ocelot: use common tag parsing code with DSA").

With that function declared as static inline, its body is expanded
inside each call site, so the dependency is broken and the DSA tagger
can be built without the switch library, upon which the felix driver
depends.

Fixes: 39e5308b32 ("net: mscc: ocelot: support PTP Sync one-step timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12 17:35:18 -07:00
Vladimir Oltean
ebb4c6a990 net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header
The sad reality is that when a PTP frame with a TX timestamping request
is transmitted, it isn't guaranteed that it will make it all the way to
the wire (due to congestion inside the switch), and that a timestamp
will be taken by the hardware and placed in the timestamp FIFO where an
IRQ will be raised for it.

The implication is that if enough PTP frames are silently dropped by the
hardware such that the timestamp ID has rolled over, it is possible to
match a timestamp to an old skb.

Furthermore, nobody will match on the real skb corresponding to this
timestamp, since we stupidly matched on a previous one that was stale in
the queue, and stopped there.

So PTP timestamping will be broken and there will be no way to recover.

It looks like the hardware parses the sequenceID from the PTP header,
and also provides that metadata for each timestamp. The driver currently
ignores this, but it shouldn't.

As an extra resiliency measure, do the following:

- check whether the PTP sequenceID also matches between the skb and the
  timestamp, treat the skb as stale otherwise and free it

- if we see a stale skb, don't stop there and try to match an skb one
  more time, chances are there's one more skb in the queue with the same
  timestamp ID, otherwise we wouldn't have ever found the stale one (it
  is by timestamp ID that we matched it).

While this does not prevent PTP packet drops, it at least prevents
the catastrophic consequences of incorrect timestamp matching.

Since we already call ptp_classify_raw in the TX path, save the result
in the skb->cb of the clone, and just use that result in the interrupt
code path.

Fixes: 4e3b0468e6 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12 17:35:18 -07:00
Vladimir Oltean
52849bcf00 net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO
PTP packets with 2-step TX timestamp requests are matched to packets
based on the egress port number and a 6-bit timestamp identifier.
All PTP timestamps are held in a common FIFO that is 128 entry deep.

This patch ensures that back-to-back timestamping requests cannot exceed
the hardware FIFO capacity. If that happens, simply send the packets
without requesting a TX timestamp to be taken (in the case of felix,
since the DSA API has a void return code in ds->ops->port_txtstamp) or
drop them (in the case of ocelot).

I've moved the ts_id_lock from a per-port basis to a per-switch basis,
because we need separate accounting for both numbers of PTP frames in
flight. And since we need locking to inc/dec the per-switch counter,
that also offers protection for the per-port counter and hence there is
no reason to have a per-port counter anymore.

Fixes: 4e3b0468e6 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12 17:35:17 -07:00
Vladimir Oltean
c57fe0037a net: mscc: ocelot: make use of all 63 PTP timestamp identifiers
At present, there is a problem when user space bombards a port with PTP
event frames which have TX timestamping requests (or when a tc-taprio
offload is installed on a port, which delays the TX timestamps by a
significant amount of time). The driver will happily roll over the 2-bit
timestamp ID and this will cause incorrect matches between an skb and
the TX timestamp collected from the FIFO.

The Ocelot switches have a 6-bit PTP timestamp identifier, and the value
63 is reserved, so that leaves identifiers 0-62 to be used.

The timestamp identifiers are selected by the REW_OP packet field, and
are actually shared between CPU-injected frames and frames which match a
VCAP IS2 rule that modifies the REW_OP. The hardware supports
partitioning between the two uses of the REW_OP field through the
PTP_ID_LOW and PTP_ID_HIGH registers, and by default reserves the PTP
IDs 0-3 for CPU-injected traffic and the rest for VCAP IS2.

The driver does not use VCAP IS2 to set REW_OP for 2-step timestamping,
and it also writes 0xffffffff to both PTP_ID_HIGH and PTP_ID_LOW in
ocelot_init_timestamp() which makes all timestamp identifiers available
to CPU injection.

Therefore, we can make use of all 63 timestamp identifiers, which should
allow more timestampable packets to be in flight on each port. This is
only part of the solution, more issues will be addressed in future changes.

Fixes: 4e3b0468e6 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12 17:35:17 -07:00
Jakub Kicinski
9fe1155233 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07 15:24:06 -07:00
Dmitry Osipenko
0d7281b27a soc/tegra: pm: Make stubs usable for compile testing
The PM stubs need to depend on ARCH_TEGRA in order to be usable for
compile-testing of tegra-cpuidle driver. Add the dependency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-04 21:27:40 +02:00
Dmitry Osipenko
aa54686e28 soc/tegra: irq: Add stubs needed for compile testing
Add stubs needed for compile-testing of tegra-cpuidle driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-04 21:27:21 +02:00
Dmitry Osipenko
45e934407b soc/tegra: fuse: Add stubs needed for compile testing
Add stubs needed for compile-testing of tegra-cpuidle driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-04 21:27:04 +02:00
Vladimir Oltean
de5bbb6f7e net: mscc: ocelot: support egress VLAN rewriting via VCAP ES0
Currently the ocelot driver does support the 'vlan modify' action, but
in the ingress chain, and it is offloaded to VCAP IS1. This action
changes the classified VLAN before the packet enters the bridging
service, and the bridging works with the classified VLAN modified by
VCAP IS1.

That is good for some use cases, but there are others where the VLAN
must be modified at the stage of the egress port, after the packet has
exited the bridging service. One example is simulating IEEE 802.1CB
active stream identification filters ("active" means that not only the
rule matches on a packet flow, but it is also able to change some
headers). For example, a stream is replicated on two egress ports, but
they must have different VLAN IDs on egress ports A and B.

This seems like a task for the VCAP ES0, but that currently only
supports pushing the ES0 tag A, which is specified in the rule. Pushing
another VLAN header is not what we want, but rather overwriting the
existing one.

It looks like when we push the ES0 tag A, it is actually possible to not
only take the ES0 tag A's value from the rule itself (VID_A_VAL), but
derive it from the following formula:

ES0_TAG_A = Classified VID + VID_A_VAL

Otherwise said, ES0_TAG_A can be used to increment with a given value
the VLAN ID that the packet was already classified to, and the packet
will have this value as an outer VLAN tag. This new VLAN ID value then
gets stripped on egress (or not) according to the value of the native
VLAN from the bridging service.

While the hardware will happily increment the classified VLAN ID for all
packets that match the ES0 rule, in practice this would be rather
insane, so we only allow this kind of ES0 action if the ES0 filter
contains a VLAN ID too, so as to restrict the matching on a known
classified VLAN. If we program VID_A_VAL with the delta between the
desired final VLAN (ES0_TAG_A) and the classified VLAN, we obtain the
desired behavior.

It doesn't look like it is possible with the tc-vlan action to modify
the VLAN ID but not the PCP. In hardware it is possible to leave the PCP
to the classified value, but we unconditionally program it to overwrite
it with the PCP value from the rule.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02 14:15:57 +01:00
Vladimir Oltean
019d9329e7 net: mscc: ocelot: fix VCAP filters remaining active after being deleted
When ocelot_flower.c calls ocelot_vcap_filter_add(), the filter has a
given filter->id.cookie. This filter is added to the block->rules list.

However, when ocelot_flower.c calls ocelot_vcap_block_find_filter_by_id()
which passes the cookie as argument, the filter is never found by
filter->id.cookie when searching through the block->rules list.

This is unsurprising, since the filter->id.cookie is an unsigned long,
but the cookie argument provided to ocelot_vcap_block_find_filter_by_id()
is a signed int, and the comparison fails.

Fixes: 50c6cc5b92 ("net: mscc: ocelot: store a namespaced VCAP filter ID")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210930125330.2078625-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-01 15:13:20 -07:00
AngeloGioacchino Del Regno
13e72c3e22 soc: qcom: spm: Implement support for SAWv4.1, SDM630/660 L2 AVS
Implement the support for SAW v4.1, used in at least MSM8998,
SDM630, SDM660 and APQ variants and, while at it, also add the
configuration for the SDM630/660 Silver and Gold cluster L2
Adaptive Voltage Scaler: this is also one of the prerequisites
to allow the OSM controller to perform DCVS.

Please note that despite there are various "versions" of these
values downstream, these are the only ones that are perfectly
stable on the entire set of tested devices.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-4-angelogioacchino.delregno@somainline.org
2021-09-21 17:41:48 -05:00
AngeloGioacchino Del Regno
60f3692b5f cpuidle: qcom_spm: Detach state machine from main SPM handling
In commit a871be6b8e ("cpuidle: Convert Qualcomm SPM driver to a generic
CPUidle driver") the SPM driver has been converted to a
generic CPUidle driver: that was mainly made to simplify the
driver and that was a great accomplishment;
Though, at that time, this driver was only applicable to ARM 32-bit SoCs,
lacking logic about the handling of newer generation SAW.

In preparation for the enablement of SPM features on AArch64/ARM64,
split the cpuidle-qcom-spm driver in two: the CPUIdle related
state machine (currently used only on ARM SoCs) stays there, while
the SPM communication handling lands back in soc/qcom/spm.c and
also making sure to not discard the simplifications that were
introduced in the aforementioned commit.

Since now the "two drivers" are split, the SCM dependency in the
main SPM handling is gone and for this reason it was also possible
to move the SPM initialization early: this will also make sure that
whenever the SAW CPUIdle driver is getting initialized, the SPM
driver will be ready to do the job.

Please note that the anticipation of the SPM initialization was
also done to optimize the boot times on platforms that have their
CPU/L2 idle states managed by other means (such as PSCI), while
needing SAW initialization for other purposes, like AVS control.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
2021-09-21 17:41:48 -05:00
Linus Torvalds
866147b8fa ARM: SoC drivers for 5.15
These are updates for drivers that are tied to a particular SoC,
 including the correspondig device tree bindings:
 
  - A couple of reset controller changes for unisoc, uniphier, renesas
    and zte platforms
 
  - memory controller driver fixes for omap and tegra
 
  - Rockchip io domain driver updates
 
  - Lots of updates for qualcomm platforms, mostly touching their
    firmware and power management drivers
 
  - Tegra FUSE and firmware driver updateѕ
 
  - Support for virtio transports in the SCMI firmware framework
 
  - cleanup of ixp4xx drivers, towards enabling multiplatform
    support and bringing it up to date with modern platforms
 
  - Minor updates for keystone, mediatek, omap, renesas.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iD8DBQBhLz215t5GS2LDRf4RAjlHAJ473D0PymaTzv68EuPHThG+DEPifQCdGjLq
 QGBB6JidIP8rtEdC+LWBB8I=
 =M5+N
 -----END PGP SIGNATURE-----

Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are updates for drivers that are tied to a particular SoC,
  including the correspondig device tree bindings:

   - A couple of reset controller changes for unisoc, uniphier, renesas
     and zte platforms

   - memory controller driver fixes for omap and tegra

   - Rockchip io domain driver updates

   - Lots of updates for qualcomm platforms, mostly touching their
     firmware and power management drivers

   - Tegra FUSE and firmware driver updateѕ

   - Support for virtio transports in the SCMI firmware framework

   - cleanup of ixp4xx drivers, towards enabling multiplatform support
     and bringing it up to date with modern platforms

   - Minor updates for keystone, mediatek, omap, renesas"

* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  reset: simple: remove ZTE details in Kconfig help
  soc: rockchip: io-domain: Remove unneeded semicolon
  soc: rockchip: io-domain: add rk3568 support
  dt-bindings: power: add rk3568-pmu-io-domain support
  bus: ixp4xx: return on error in ixp4xx_exp_probe()
  soc: renesas: Prefer memcpy() over strcpy()
  firmware: tegra: Stop using seq_get_buf()
  soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
  soc/tegra: fuse: Add runtime PM support
  soc/tegra: fuse: Clear fuse->clk on driver probe failure
  soc/tegra: pmc: Prevent racing with cpuilde driver
  soc/tegra: bpmp: Remove unused including <linux/version.h>
  dt-bindings: soc: ti: pruss: Add dma-coherent property
  soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
  dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
  firmware: arm_scmi: Use WARN_ON() to check configured transports
  firmware: arm_scmi: Fix boolconv.cocci warnings
  soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
  soc: mediatek: mmsys: add MT8365 support
  ...
2021-09-01 15:25:28 -07:00
Linus Torvalds
634135a07b ARM: SoC updates for 5.15
There are three noteworthy updates for 32-bit arm platforms this time:
 
  - The Microchip SAMA7 family based on Cortex-A7 gets introduced, a new
    cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5 based)
    SoCs.
 
  - The ixp4xx platform (based on Intel XScale) is finally converted to
    device tree, and all the old board files are getting removed now.
 
  - The Cirrus Logic EP93xx platform loses support for the old
    MaverickCrunch FPU. Support for compiling user space applications
    was already removed in gcc-4.9, and the kernel support for old
    applications could not be built with clang ias. After confirming
    that there are no remaining users, removing this from the kernel
    seemed better than adding support for unused features to clang.
 
 There are minor updates to the aspeed, omap and samsung platforms
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iD8DBQBhL0Bu5t5GS2LDRf4RAtYAAJ9qcN3tF8tHPPBUknXjvQVN7ESntwCfQtPu
 XOVR6q993d7EZh3ATYuXVtE=
 =igP/
 -----END PGP SIGNATURE-----

Merge tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "There are three noteworthy updates for 32-bit arm platforms this time:

   - The Microchip SAMA7 family based on Cortex-A7 gets introduced, a
     new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5
     based) SoCs.

   - The ixp4xx platform (based on Intel XScale) is finally converted to
     device tree, and all the old board files are getting removed now.

   - The Cirrus Logic EP93xx platform loses support for the old
     MaverickCrunch FPU. Support for compiling user space applications
     was already removed in gcc-4.9, and the kernel support for old
     applications could not be built with clang ias. After confirming
     that there are no remaining users, removing this from the kernel
     seemed better than adding support for unused features to clang.

  There are minor updates to the aspeed, omap and samsung platforms"

* tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  soc: aspeed-lpc-ctrl: Fix clock cleanup in error path
  ARM: s3c: delete unneed local variable "delay"
  soc: aspeed: Re-enable FWH2AHB on AST2600
  soc: aspeed: socinfo: Add AST2625 variant
  soc: aspeed: p2a-ctrl: Fix boundary check for mmap
  soc: aspeed: lpc-ctrl: Fix boundary check for mmap
  ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
  ARM: ixp4xx: Delete GTWX5715 board files
  ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
  ARM: ixp4xx: Delete Intel reference design boardfiles
  ARM: ixp4xx: Delete Avila boardfiles
  ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
  ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
  ARM: ixp4xx: Delete Omicron boardfiles
  ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
  ARM: ixp4xx: Delete NAS100D boardfiles
  ARM: ixp4xx: Delete NSLU2 boardfiles
  arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
  arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
  ARM: ep93xx: remove MaverickCrunch support
  ...
2021-09-01 15:19:43 -07:00
Vladimir Oltean
3b95d1b293 net: mscc: ocelot: transmit the VLAN filtering restrictions via extack
We need to transmit more restrictions in future patches, convert this
one to netlink extack.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:39:52 +01:00
Vladimir Oltean
01af940e9b net: mscc: ocelot: transmit the "native VLAN" error via extack
We need to reject some more configurations in future patches, convert
the existing one to netlink extack.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:39:52 +01:00
Arnd Bergmann
c4361dee2e soc/tegra: Changes for v5.15-rc1
Implements runtime PM support for the FUSE block and prepares the driver
 to work better in conjunction with the CPUIDLE driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmEWl5ATHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoZsWD/9KuRskoHLU9ism/+4ZW3zb7AthqYEd
 nE0mIjoRjZe8nOjBv4nBO40varyyO5nrA7+Ko5Vu4ArYOz+xFjKVNAYtYe3jqhvv
 fNlvcsMYoAf++3Sr35XjNi6ILQV0eKtZwT5rgLmzcKiC58JZ1y3DMi8YoD3x2MBh
 49O68pG36GjkB6n1fMP/P7KgNmnhfO6AaQCDzxRYxAEKi2whq6jmxcZRIWYaIvPT
 DNTeU7DTFnBYGOmXAyG6qrl6IJKasO6QeU/YXS3XBCwF2XL4cNaWfXawDXm57v4Q
 1G/rz4sUiBLeGoKKqvApuOeogKQpeAfWaZaeYr9wl8OI5yam/kQGcH+qi6kyiLCu
 W7N81RxVWPD2Ehuwn2hdr30Gqq/KtUcY5Dq3YCdP2SwL25fYxbac08FufH/ARPHZ
 MMTo32FhNp+6BYoD5aqFQJAKB0lCDjmZvYPYE1ux/yPysIDSLaVKFCenS0Ky+utA
 UzMUw/IoB2XhTEhgYbrdhcMFcvRTHbldPi6xndSz3RSBcRPLih/5PpKpBmtPPxAc
 TodJVnuIrQCjyQuNKrmlLEyYgbMD6LaX52x8JwLctCNYA/xH7ZXaxCjNXKNshynp
 w4wxGzGNpmTeisvSxin+knjJB8uZu/X9L+wRlzzhs3t6BKwagSJVl0CH5Wviy12P
 WeMvvgV5szk9cw==
 =migJ
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmEdCdsACgkQmmx57+YA
 GNnsexAApw0O9VGU7SCEE9w9drayJNljjaGoOR5HmIq9xgd7IpnGrBsOecVfjTqs
 Z48EB6zELIUrTSaUdfxMM7mF9PSCZyF9ekEl5dA6JeJ+4orvoDHcOOiMmRQxvBrs
 0Sz9q7kCz1N+dabIPym2eOpzfW+EZbGorpadNek1SNAUOTCjPklgIIuXeXAkYWFU
 jak6Fsx3IbG28s8fsaSRDXJSfq40HFOLBlAs0qPykO+iKXYvUHdSrYRn7B8pTHHE
 c2agaS9Hao1+sTUsTTaHEexQRDSNJn31Xae8FQ1o3/Uny+U8fcPKDt9Uy4tcsNi6
 rxS04z4dbm7tVwyasXoqxcwRtKcY4wvhMhniYz80BMAF3DdjsRPYcSmlscDF79aP
 KoeotPXmD6JLnyjmC0SimapQtbdBJsIivTukeuSCxGN7qgYF0YbOmfdlSTU5YtmP
 DXzaAcT6cJaefSSR5IgOxwa2v3LsDTO1HLbuhMtfQL32RaXxFNHjByBz250ltsO7
 2hXTyMSkbo4NFeEdD4+JjmuIMkwh8L25NJDnUKjC5i0cn3568IfktAkxfKj/5qPs
 McI7oriaW//ljUroP7CAxsf+Y+FOIy/Bf9vgpmbCHaKns4xaJCCQc8jMIRzrqeE4
 Y7yiaG5cktceQtLDHvTWZgMgC8FDO1UfFpBFdSYJkjcFbTOxlUk=
 =GgIf
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

soc/tegra: Changes for v5.15-rc1

Implements runtime PM support for the FUSE block and prepares the driver
to work better in conjunction with the CPUIDLE driver.

* tag 'tegra-for-5.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
  soc/tegra: fuse: Add runtime PM support
  soc/tegra: fuse: Clear fuse->clk on driver probe failure
  soc/tegra: pmc: Prevent racing with cpuilde driver
  soc/tegra: bpmp: Remove unused including <linux/version.h>

Link: https://lore.kernel.org/r/20210813162157.2820913-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-18 15:23:38 +02:00
Vladimir Oltean
e6e12df625 net: mscc: ocelot: convert to phylink
The felix DSA driver, which is a wrapper over the same hardware class as
ocelot, is integrated with phylink, but ocelot is using the plain PHY
library. It makes sense to bring together the two implementations, which
is what this patch achieves.

This is a large patch and hard to break up, but it does the following:

The existing ocelot_adjust_link writes some registers, and
felix_phylink_mac_link_up writes some registers, some of them are
common, but both functions write to some registers to which the other
doesn't.

The main reasons for this are:
- Felix switches so far have used an NXP PCS so they had no need to
  write the PCS1G registers that ocelot_adjust_link writes
- Felix switches have the MAC fixed at 1G, so some of the MAC speed
  changes actually break the link and must be avoided.

The naming conventions for the functions introduced in this patch are:
- vsc7514_phylink_{mac_config,validate} are specific to the Ocelot
  instantiations and placed in ocelot_net.c which is built only for the
  ocelot switchdev driver.
- ocelot_phylink_mac_link_{up,down} are shared between the ocelot
  switchdev driver and the felix DSA driver (they are put in the common
  lib).

One by one, the registers written by ocelot_adjust_link are:

DEV_MAC_MODE_CFG - felix_phylink_mac_link_up had no need to write this
                   register since its out-of-reset value was fine and
                   did not need changing. The write is moved to the
                   common ocelot_phylink_mac_link_up and on felix it is
                   guarded by a quirk bit that makes the written value
                   identical with the out-of-reset one
DEV_PORT_MISC - runtime invariant, was moved to vsc7514_phylink_mac_config
PCS1G_MODE_CFG - same as above
PCS1G_SD_CFG - same as above
PCS1G_CFG - same as above
PCS1G_ANEG_CFG - same as above
PCS1G_LB_CFG - same as above
DEV_MAC_ENA_CFG - both ocelot_adjust_link and ocelot_port_disable
                  touched this. felix_phylink_mac_link_{up,down} also
                  do. We go with what felix does and put it in
                  ocelot_phylink_mac_link_up.
DEV_CLOCK_CFG - ocelot_adjust_link and felix_phylink_mac_link_up both
                write this, but to different values. Move to the common
                ocelot_phylink_mac_link_up and make sure via the quirk
                that the old values are preserved for both.
ANA_PFC_PFC_CFG - ocelot_adjust_link wrote this, felix_phylink_mac_link_up
                  did not. Runtime invariant, speed does not matter since
                  PFC is disabled via the RX_PFC_ENA bits which are cleared.
                  Move to vsc7514_phylink_mac_config.
QSYS_SWITCH_PORT_MODE_PORT_ENA - both ocelot_adjust_link and
                                 felix_phylink_mac_link_{up,down} wrote
                                 this. Ocelot also wrote this register
                                 from ocelot_port_disable. Keep what
                                 felix did, move in ocelot_phylink_mac_link_{up,down}
                                 and delete ocelot_port_disable.
ANA_POL_FLOWC - same as above
SYS_MAC_FC_CFG - same as above, except slight behavior change. Whereas
                 ocelot always enabled RX and TX flow control, felix
                 listened to phylink (for the most part, at least - see
                 the 2500base-X comment).

The registers which only felix_phylink_mac_link_up wrote are:

SYS_PAUSE_CFG_PAUSE_ENA - this is why I am not sure that flow control
                          worked on ocelot. Not it should, since the
                          code is shared with felix where it does.
ANA_PORT_PORT_CFG - this is a Frame Analyzer block register, phylink
                    should be the one touching them, deleted.

Other changes:

- The old phylib registration code was in mscc_ocelot_init_ports. It is
  hard to work with 2 levels of indentation already in, and with hard to
  follow teardown logic. The new phylink registration code was moved
  inside ocelot_probe_port(), right between alloc_etherdev() and
  register_netdev(). It could not be done before (=> outside of)
  ocelot_probe_port() because ocelot_probe_port() allocates the struct
  ocelot_port which we then use to assign ocelot_port->phy_mode to. It
  is more preferable to me to have all PHY handling logic inside the
  same function.
- On the same topic: struct ocelot_port_private :: serdes is only used
  in ocelot_port_open to set the SERDES protocol to Ethernet. This is
  logically a runtime invariant and can be done just once, when the port
  registers with phylink. We therefore don't even need to keep the
  serdes reference inside struct ocelot_port_private, or to use the devm
  variant of of_phy_get().
- Phylink needs a valid phy-mode for phylink_create() to succeed, and
  the existing device tree bindings in arch/mips/boot/dts/mscc/ocelot_pcb120.dts
  don't define one for the internal PHY ports. So we patch
  PHY_INTERFACE_MODE_NA into PHY_INTERFACE_MODE_INTERNAL.
- There was a strategically placed:

	switch (priv->phy_mode) {
	case PHY_INTERFACE_MODE_NA:
	        continue;

  which made the code skip the serdes initialization for the internal
  PHY ports. Frankly that is not all that obvious, so now we explicitly
  initialize the serdes under an "if" condition and not rely on code
  jumps, so everything is clearer.
- There was a write of OCELOT_SPEED_1000 to DEV_CLOCK_CFG for QSGMII
  ports. Since that is in fact the default value for the register field
  DEV_CLOCK_CFG_LINK_SPEED, I can only guess the intention was to clear
  the adjacent fields, MAC_TX_RST and MAC_RX_RST, aka take the port out
  of reset, which does match the comment. I don't even want to know why
  this code is placed there, but if there is indeed an issue that all
  ports that share a QSGMII lane must all be up, then this logic is
  already buggy, since mscc_ocelot_init_ports iterates using
  for_each_available_child_of_node, so nobody prevents the user from
  putting a 'status = "disabled";' for some QSGMII ports which would
  break the driver's assumption.
  In any case, in the eventuality that I'm right, we would have yet
  another issue if ocelot_phylink_mac_link_down would reset those ports
  and that would be forbidden, so since the ocelot_adjust_link logic did
  not do that (maybe for a reason), add another quirk to preserve the
  old logic.

The ocelot driver teardown goes through all ports in one fell swoop.
When initialization of one port fails, the ocelot->ports[port] pointer
for that is reset to NULL, and teardown is done only for non-NULL ports,
so there is no reason to do partial teardowns, let the central
mscc_ocelot_release_ports() do its job.

Tested bind, unbind, rebind, link up, link down, speed change on mock-up
hardware (modified the driver to probe on Felix VSC9959). Also
regression tested the felix DSA driver. Could not test the Ocelot
specific bits (PCS1G, SERDES, device tree bindings).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16 11:19:34 +01:00
Vladimir Oltean
46efe4efb9 net: dsa: felix: stop calling ocelot_port_{enable,disable}
ocelot_port_enable touches ANA_PORT_PORT_CFG, which has the following
fields:

- LOCKED_PORTMOVE_CPU, LEARNDROP, LEARNCPU, LEARNAUTO, RECV_ENA, all of
  which are written with their hardware default values, also runtime
  invariants. So it makes no sense to write these during every .ndo_open.

- PORTID_VAL: this field has an out-of-reset value of zero for all ports
  and must be initialized by software. Additionally, the
  ocelot_setup_logical_port_ids() code path sets up different logical
  port IDs for the ports in a hardware LAG, and we absolutely don't want
  .ndo_open to interfere there and reset those values.

So in fact the write from ocelot_port_enable can better be moved to
ocelot_init_port, and the .ndo_open hook deleted.

ocelot_port_disable touches DEV_MAC_ENA_CFG and QSYS_SWITCH_PORT_MODE_PORT_ENA,
in an attempt to undo what ocelot_adjust_link did. But since .ndo_stop
does not get called each time the link falls (i.e. this isn't a
substitute for .phylink_mac_link_down), felix already does better at
this by writing those registers already in felix_phylink_mac_link_down.

So keep ocelot_port_disable (for now, until ocelot is converted to
phylink too), and just delete the felix call to it, which is not
necessary.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16 11:19:34 +01:00
Dmitry Osipenko
9c93ccfc86 soc/tegra: pmc: Prevent racing with cpuilde driver
Both PMC and cpuidle drivers are probed at the same init level and
cpuidle depends on the PMC suspend mode. Add new default suspend mode
that indicates whether PMC driver has been probed and reset the mode in
a case of deferred probe of the PMC driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-11 11:51:39 +02:00
Arnd Bergmann
318845985f AT91 soc for 5.15:
- add new SoC based on a Cortex-A7 core: the SAMA7G5 family
   - mach-at91 entry, Kconfig and header files
   - Power Management Controller (PMC) code and associated power management
     changes. Support for suspend/resume, Ultra Low Power modes and
     Backup with Memory in Self-Refresh mode.
   - Power management association with DDR controller and
     shutdown controller for addressing this variety of modes.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYQpPnQAKCRAfOrpwrNPN
 DJyeAQDvS538E7jFPdsmUn3iZhMhV4zCZVsPk9fox9ptV8ewEAD/QuWFZg78YkZE
 vGe/AXlxjA4V/TMiGElf0/nbZ8xLiw4=
 =YucO
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmEKnQEACgkQmmx57+YA
 GNnU8g/+OZx39NCFnyUcUUmdFHEl/tn6Vkcirs9abdkpjSSylXLJnIVuimHZy0d5
 oxDc3H83dIhCxLO5my27y8QH5e41dhCD7gVIxf+MF/RCYzGt+BjXiImt6YTOvrK9
 hEFzO49XkiBSTtXpNER6hk5BWuIVAg4b1bFnzrhH9ajGxMCboubsxuRMlRP7t4ad
 Vg8Rgf4TOY1AgMm6P5zVjjMAij4C3uKcOO8WLZA9zVGFlKdftdDCvYBfojitctho
 O97Hg4tSYb4N+l8UPcD+dIie0L7Pp8QtgNjV2MiT/Nyuhewdf1DyH14cFSNxIrmA
 laVeRU5WPXJwxNdnEYukb1yI6TEKFQDHTksGWkHr0cQkxalHhuegNUczVwHgZaEZ
 j6pk1yskhRtqmwMyt/810lrEB/o01aPX2TldGda3h3XUxe4q/mw4QR7j9fIFDzjY
 06S5LH/kL36kJ7QAV6ppQLFjBJ5+UJFHymHSXnsCNnaeD6mSZxncaLDoNt+O90kE
 IdALvvwq1ggbKDTQVgpIyU1XfYaNdXcbX1hACXP2LO5/MQejgQ2KJNtS1Qk1aLCC
 T161nfyi/YW5o7h70JGpNK9go5lj/60MgGtocQ5d+zxzyUKNCARaiYRjy0xP7/KR
 1eftv0qgk+J+3+NYOGroLaixVbfLWlIjD9hyaMDnGKzYB857nSY=
 =+KcA
 -----END PGP SIGNATURE-----

Merge tag 'at91-soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc

AT91 soc for 5.15:

- add new SoC based on a Cortex-A7 core: the SAMA7G5 family
  - mach-at91 entry, Kconfig and header files
  - Power Management Controller (PMC) code and associated power management
    changes. Support for suspend/resume, Ultra Low Power modes and
    Backup with Memory in Self-Refresh mode.
  - Power management association with DDR controller and
    shutdown controller for addressing this variety of modes.

* tag 'at91-soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (26 commits)
  ARM: at91: pm: add sama7g5 shdwc
  ARM: at91: pm: add pm support for SAMA7G5
  ARM: at91: sama7: introduce sama7 SoC family
  ARM: at91: pm: add sama7g5's pmc
  ARM: at91: pm: add backup mode support for SAMA7G5
  ARM: at91: pm: save ddr phy calibration data to securam
  ARM: at91: pm: add sama7g5 ddr phy controller
  ARM: at91: pm: add sama7g5 ddr controller
  ARM: at91: pm: wait for ddr power mode off
  ARM: at91: pm: add support for 2.5V LDO regulator control
  ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes
  ARM: at91: pm: add self-refresh support for sama7g5
  ARM: at91: ddr: add registers definitions for sama7g5's ddr
  ARM: at91: sfrbu: add sfrbu registers definitions for sama7g5
  ARM: at91: pm: add support for waiting MCK1..4
  ARM: at91: pm: s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g
  ARM: at91: pm: avoid push and pop on stack while memory is in self-refersh
  ARM: at91: pm: use r7 instead of tmp1
  ARM: at91: pm: do not initialize pdev
  ARM: at91: pm: check for different controllers in at91_pm_modes_init()
  ...

Link: https://lore.kernel.org/r/20210804084316.12641-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-04 15:58:25 +02:00
Claudiu Beznea
d8c7983f31 ARM: at91: ddr: add registers definitions for sama7g5's ddr
Add registers and bits definitions for SAMA7G5's UDDRC and DDR3PHY.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210415105010.569620-12-claudiu.beznea@microchip.com
2021-07-19 14:32:12 +02:00
Claudiu Beznea
96abf16861 ARM: at91: sfrbu: add sfrbu registers definitions for sama7g5
Add SFRBU registers definitions for SAMA7G5.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210415105010.569620-11-claudiu.beznea@microchip.com
2021-07-19 14:32:12 +02:00
Arnd Bergmann
b6e473d1e2 Memory controller drivers for v5.14 - Tegra SoC, late fixes
Two fixes for recent series of changes in Tegra SoC memory controller
 drivers:
 1. Add a stub for tegra_mc_probe_device() to fix compile testing of
    arm-smmu without TEGRA_MC.
 2. Fix arm-smmu dtschema syntax.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmDtUZoQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1/yVD/94mEVxoVOlE/y7gPmvx2HujMOGLWgD8UqS
 sMjXkDun8dJNlFk5dwR/qeS/VWZd8qyyKSiKMV0niD+F7EYtrWxLBqaKDXvNo2IG
 8IXP7O/oCcMpSSjutlqL5vw71FhIdjlIXKr+s7T33wPiBIcLUlbx/9v4SaI6W+1l
 FbNbEk1iL1hvQsgR5U90GXjUhgp4iM3MzlEQKdmufoNSVTUrj/W2RZXOVf0S9BKr
 6R3nJgcHKZS5iwESF2A37/lO6sI04CZwbu0KQEr3mGD0EX9RfZVGhY2bqIZfYQws
 iOn7nRbKYpwEldMhe4qvSWxyS8A4JanXL6sSeBI1X0RiRr+P1u4HRcNQlVYG06gr
 bwBUUzSg1utlC6ERipwjcwIEDt+61GVDP7HMWd0w4xnchdnD8h5BLMqksaeg5vcC
 lsfPyjTNP2DWTj1AYhG9JSRgFYp5YkjBJ7BnzBgHDsXDHIgSknf+zlFVj/9NBESn
 aTE28pZQ3RW55azOnACV6+l42LSoVc8vNWWXRe1jgy60sN7RFe5/Wxb/nQ6qQI1r
 deS9paowkAgz8ojGZqNXkGl7Bq0YE6ZV2XvnlbcU6CFeMbrdK1FfZ9HKcG2nVvhM
 KP1CO1LghUKbr83qN146PsJsH97PKvP4KitSVx3Nby1j/LH8AruBjnx+Ze++rvcU
 rkZXIKZ6qg==
 =V/ST
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmDx8TUACgkQmmx57+YA
 GNnICg/9FDlqHon2H5A6zWqtD0VVp9IH82+9YqgKmtqqARpUre7lLSghdMLbYsor
 5oQlUyk5GbR2VSj5uPs7RNhOvAjPryUm+RwboKEGI+K1l/qOAe7eRIem3w0ZzaYX
 2LLmFjgnIqOMKsBiJGL0PKZTMTW6t4wE7yKJVcyLEPEQ4H7YbUY0U/9X0NVdRmzD
 wfQjcqEbzhKbdYhVxgyoSbw5oE16DhSNY2X4MSMoaUGn0A6SwNYrW8dnpW76ZBRv
 yVPUZilRrfiSwf4qOHlQuEm60Gpa1ndZzbOdlyMhnfqorph1Joe+tezXfdjjG4Vg
 MPxbA2xaYiX2aRUqGomr5jsUNDEKSocRCYgXV9h9jt+TaGANW/u1WMWcqdp9nLND
 hbu9+8bUWd2qyE4XmT9NUJXSb11ccHTNJvEAbanH7JspedhHKya+G0t59vLvyYey
 dbtznkYMhl3y1q/FJl5RLU1yLjmnv3X7Qp9Cj3N1EBySaZxfKynFX1ErqXw7D6dv
 ZnENDVoybFH9D/ZVX+fAiUZkNFfWOV0draVK0122ZwB9NxHvHKwT4JiP58w70UUn
 Qf9LUrdupsILuLoCuQl/P3/uS6xYv8qAnRaLmqGT//NJCq+NINOLCVg1TqI/LWSr
 +m6/HBpPjIrMrsxMWQeC+eJVsbkT6zLXOJKTzhljWVYGHQLGYi4=
 =KdqU
 -----END PGP SIGNATURE-----

Merge tag 'memory-controller-drv-tegra-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes

Memory controller drivers for v5.14 - Tegra SoC, late fixes

Two fixes for recent series of changes in Tegra SoC memory controller
drivers:
1. Add a stub for tegra_mc_probe_device() to fix compile testing of
   arm-smmu without TEGRA_MC.
2. Fix arm-smmu dtschema syntax.

* tag 'memory-controller-drv-tegra-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  dt-bindings: arm-smmu: Fix json-schema syntax
  memory: tegra: Add compile-test stub for tegra_mc_probe_device()

Link: https://lore.kernel.org/r/20210625073604.13562-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16 22:51:01 +02:00
Linus Torvalds
071e5aceeb ARM: Drivers for 5.14
- Reset controllers: Adding support for Microchip Sparx5 Switch.
 
 - Memory controllers: ARM Primecell PL35x SMC memory controller
   driver cleanups and improvements.
 
 - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
 
 - Rockchip: RK3568 power domains support + DT binding updates,
   cleanups.
 
 - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
   including support for MSM8226, MDM9607, SM6125 and SC8180X.
 
 - ARM FFA driver: "Firmware Framework for ARMv8-A", defining
   management interfaces and communication (including bus model)
   between partitions both in Normal and Secure Worlds.
 
 - Tegra Memory controller changes, including major rework to deal
   with identity mappings at boot and integration with ARM SMMU
   pieces.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAmDokgYPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3looP/20uQAjRadPJFdV/B2mpZYqXMI4dIN9g7KJ1
 6uEoaGurzYWQQreDXswQ5vFUcQfIudEJ9Im9IF+9BUsFQ2uvPTJ4I+HDN++WH70B
 cIsmwwBr7Q4JUVP+O7T2WGtBY69jvHTpJrCCVtyHtwEyL4a1uyfelsAJXbxqaqis
 w1lmXNkkSqx5c67H3maNNDRnbutyLL2gO0TYdiBapOcc5V03OYKNnMbDqRTddqyt
 4UH4eYkFkNai8UJ476BXHU9ldlWzEkRBib/OKwF9k3oPj9W3kdQ/vd2IKK5a1fTX
 jIbOPSRRC8K/9Bxn1KEtdoU0Yy+rlm3xd7DtQl5RyGTD+tHVq3dN55WjoXBY83Yh
 r37y7uII9i09tPg5+APSX/jgodsIt4c46dKwvYuWXvB7ziomfsKxQiRanApJG6UX
 qS5NCUrlfYWlL302JOTvEtDBePXXiXQ065GuRjM948WMnVzXwEKwYUakGhvXQWMS
 jXCcOGW7GhnbY3+Ipn9chyhydHpKSxIb8oBk4cMRJU9jlN2GmjHgW8RMvT2WM6VF
 1F8acyMvf6en5tV6f23cjbW+iIMTS5egKNfqi8tdjGVxbowypyJYzjYOhaqk6veJ
 jHOmpglTXas0QD3ZRU7vGVlrvHqik8XyRsq3N9CQjVenRCbsQLKZRi1gTbIuspcR
 rejqH3Fs
 =kPg8
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Olof Johansson:

 - Reset controllers: Adding support for Microchip Sparx5 Switch.

 - Memory controllers: ARM Primecell PL35x SMC memory controller driver
   cleanups and improvements.

 - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.

 - Rockchip: RK3568 power domains support + DT binding updates,
   cleanups.

 - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
   including support for MSM8226, MDM9607, SM6125 and SC8180X.

 - ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
   interfaces and communication (including bus model) between partitions
   both in Normal and Secure Worlds.

 - Tegra Memory controller changes, including major rework to deal with
   identity mappings at boot and integration with ARM SMMU pieces.

* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
  firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
  firmware: turris-mox-rwtm: show message about HWRNG registration
  firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
  firmware: turris-mox-rwtm: report failures better
  firmware: turris-mox-rwtm: fix reply status decoding function
  soc: imx: gpcv2: add support for i.MX8MN power domains
  dt-bindings: add defines for i.MX8MN power domains
  firmware: tegra: bpmp: Fix Tegra234-only builds
  iommu/arm-smmu: Use Tegra implementation on Tegra186
  iommu/arm-smmu: tegra: Implement SID override programming
  iommu/arm-smmu: tegra: Detect number of instances at runtime
  dt-bindings: arm-smmu: Add Tegra186 compatible string
  firmware: qcom_scm: Add MDM9607 compatible
  soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
  soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
  soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
  dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
  memory: emif: remove unused frequency and voltage notifiers
  memory: fsl_ifc: fix leak of private memory on probe failure
  memory: fsl_ifc: fix leak of IO mapping on probe failure
  ...
2021-07-10 09:46:20 -07:00
Linus Torvalds
6e207b8821 ARM: SoC changes for 5.14
A few SoC (code) changes have queued up this cycle, mostly for minor
 changes and some refactoring and cleanup of legacy platforms. This
 branch also contains a few of the fixes that weren't sent in by the end
 of the release (all fairly minor).
 
  - Adding an additional maintainer for the TEE subsystem (Sumit Garg)
 
  - Quite a significant modernization of the IXP4xx platforms by Linus
    Walleij, revisiting with a new PCI host driver/binding, removing legacy
    mach/* include dependencies and moving platform detection/config to
    drivers/soc. Also some updates/cleanup of platform data.
 
  - Core power domain support for Tegra platforms, and some improvements
    in build test coverage by adding stubs for compile test targets.
 
  - A handful of updates to i.MX platforms, adding legacy (non-PSCI) SMP
    support on i.MX7D, SoC ID setup for i.MX50, removal of platform data
    and board fixups for iMX6/7.
 
  ... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
  Rockchip.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAmDojiQPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3Z+kQAJofM2XXE3eHoIGINp+XuYZHCAdTxpIJfhsQ
 KPt4dzaxq0eBhrD8PICelJ2ymWz4c3sO2z+v79zQfOJdutnFKWTCRstqW8qdq9cE
 vzYh5pDJy0VmLkYSX/PzvfTLUQDM+Cx0sH/8e2gRwCC/F5tXolLA8lcqWQg9LnlC
 5joLOm2WL2uHDgPFZLR6Y1m0KabvUMMpYx6ji9EUx4qtc0VgRMRTSZkRZK4E1PU+
 ls175pPZxQfmTyFuHGc1L6KrfnHry8+YX/61sMlBfi96itMnBi05PcxljH8hMkQ8
 IVfqPYVnI2vX37f8MhcX4Wec8pKQ9SZqT9mbADGEG23XfZppT5cp7pJUACoZ/wJ5
 MMXn99hsEI0NO/gswKr2ZCCskydWrwOqhzubxZrYQtyFt38Sgs+mMLYxyQJKztbZ
 Laz+JBYKsvIlRctt+fArLp79EJx+CpSUpcha5Q0dQUmz3GWApPpS/6nMiNkq1Myv
 aByG9HXjOpRI5IiaOi7Fv/m/i+TsO43boNFerUIqPYi2AxmM9D8M2sJcyWHVwQRK
 glSAjISbp0GHAzVPM5JzhGIrCu4xC5Hf09Q+0OP6c3YVylwKNMurJCjCCql+ft8I
 Z41WVglS4xO5Y/qiWi+5pzg7/+VESBcsFn6PA5AJAAsDGgU5WHHXhI5kO7eUFAK9
 nuIbtqUS
 =b6Jo
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Olof Johansson:
 "A few SoC (code) changes have queued up this cycle, mostly for minor
  changes and some refactoring and cleanup of legacy platforms. This
  branch also contains a few of the fixes that weren't sent in by the
  end of the release (all fairly minor).

   - Adding an additional maintainer for the TEE subsystem (Sumit Garg)

   - Quite a significant modernization of the IXP4xx platforms by Linus
     Walleij, revisiting with a new PCI host driver/binding, removing
     legacy mach/* include dependencies and moving platform
     detection/config to drivers/soc. Also some updates/cleanup of
     platform data.

   - Core power domain support for Tegra platforms, and some
     improvements in build test coverage by adding stubs for compile
     test targets.

   - A handful of updates to i.MX platforms, adding legacy (non-PSCI)
     SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
     data and board fixups for iMX6/7.

  ... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
  Rockchip"

* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
  MAINTAINERS: Add myself as TEE subsystem reviewer
  ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
  hw_random: ixp4xx: Add OF support
  hw_random: ixp4xx: Add DT bindings
  hw_random: ixp4xx: Turn into a module
  hw_random: ixp4xx: Use SPDX license tag
  hw_random: ixp4xx: enable compile-testing
  pata: ixp4xx: split platform data to its own header
  soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
  PCI: ixp4xx: Add a new driver for IXP4xx
  PCI: ixp4xx: Add device tree bindings for IXP4xx
  ARM/ixp4xx: Make NEED_MACH_IO_H optional
  ARM/ixp4xx: Move the virtual IObases
  MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
  ARM: debug: add UART early console support for MSTAR SoCs
  ARM: dts: ux500: Fix LED probing
  ARM: imx: add smp support for imx7d
  ARM: imx6q: drop of_platform_default_populate() from init_machine
  arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
  soc/tegra: fuse: Fix Tegra234-only builds
  ...
2021-07-10 09:22:44 -07:00
Conor Dooley
83d7b15608 mbox: add polarfire soc system controller mailbox
This driver adds support for the single mailbox channel of the MSS
system controller on the Microchip PolarFire SoC.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26 12:06:48 -05:00
Thierry Reding
47661ee182 memory: tegra: Add compile-test stub for tegra_mc_probe_device()
The tegra_mc_probe_device() symbol is only available when the TEGRA_MC
Kconfig option is enabled. Provide a stub if that's not the case so that
the driver can be compile-tested.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210618111846.1286166-1-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-20 21:22:30 +02:00
Olof Johansson
777cf27fb2 soc/tegra: Changes for v5.14-rc1
These changes implement the core power domain for the PMC, and fix a
 couple of minor issues as well as add stubs to help some drivers be
 compile tested more easily.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmDDjV4THHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoXVsD/0QgZHiuEH8rU42JtYGB/rjCskWUPen
 BOtcrIi+QxJ7m8q4qnRrPIeE8ETjQAB92pWpZE8VQ260Pk/s8NAeIXBbP7I2lKU8
 M+TkwvCQ8zZw18q9ZPinqSUHgVsh7Q+7kQggHGZcYpE4rOmlb0oTr9B2EprdSpBl
 hVNGtcaJ9Ovqri1ioDi/owUaxYpeJ3L8A++luIv9K8oDUpN7GBw3nV0dMOBvUOBs
 nT9iQFEThvo0NRNs4zPNDPLPsLJFwePRDmY9SE4PCreDKo26+VWAamooW8R6iEnU
 P7OOfCSZbLqMs8Sfkjrb742sqWX50okFFJQG6aW3BOln3IA5esc9uJ3l2jH6GZP1
 21hestxJjK2JuZLv8uMtGHura8do7e4PrYVvxOT6Lp85AXaXA1/uieAWRyh40lcD
 d4S4hL3prlfgepj6eUy40MnbLbatsRyQoFYdloZtB+cZb+KxMSV/Lx+j0Y5VyOI/
 OpVcTxTxwAZRrVcHTISkUjkxLProY1hQwQP9vexRMIn8SB+ZhgztjHJQuUxa25at
 c2Q1aOeGr+h3w1NYpOa+u1tyyKt/Vw92tA84MHaoGoWJg2DGXDAh66HFpiFrmE8q
 +n2wc/uyhz1bdS38ky73ibJ6iQ96ucRLxEjCIz+59hdZ57bEYnF+EUJtNdMSyqXg
 hGVs5fnWFlw97Q==
 =g0AU
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc

soc/tegra: Changes for v5.14-rc1

These changes implement the core power domain for the PMC, and fix a
couple of minor issues as well as add stubs to help some drivers be
compile tested more easily.

* tag 'tegra-for-5.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: fuse: Fix Tegra234-only builds
  soc/tegra: fuse: Don't return -ENOMEM when allocate lookups failed
  soc/tegra: regulators: Support core domain state syncing
  soc/tegra: pmc: Add driver state syncing
  soc/tegra: pmc: Add core power domain
  soc/tegra: fuse: Add stubs needed for compile-testing
  soc/tegra: Add devm_tegra_core_dev_init_opp_table()
  soc/tegra: Add stub for soc_is_tegra()
  soc/tegra: regulators: Bump voltages on system reboot
  regulator: core: Add regulator_sync_voltage_rdev()

Link: https://lore.kernel.org/r/20210611164437.3568059-2-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15 08:35:29 -07:00
Thierry Reding
393d66fd2c memory: tegra: Implement SID override programming
Instead of programming all SID overrides during early boot, perform the
operation on-demand after the SMMU translations have been set up for a
device. This reuses data from device tree to match memory clients for a
device and programs the SID specified in device tree, which corresponds
to the SID used for the SMMU context banks for the device.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-2-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03 21:50:43 +02:00
Thierry Reding
7355c7b9ae memory: tegra: Unify drivers
The Tegra210 (and earlier) driver now supports all the functionality
that the Tegra186 (and later) driver does, so they can be unified.

Note that previously the Tegra186 (and later) driver could be unloaded,
even if that was perhaps not very useful. Older chips don't support that
yet, but once they do this code can be reenabled.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-11-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03 21:49:41 +02:00
Thierry Reding
1079a66bc3 memory: tegra: Parameterize interrupt handler
Tegra20 requires a slightly different interrupt handler than Tegra30 and
later, so parameterize the handler, so that each SoC implementation can
provide its own.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-8-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03 21:49:41 +02:00
Thierry Reding
c64738e949 memory: tegra: Make per-SoC setup more generic
The current per-SoC setup code runs at a fairly arbitrary point during
probe, thereby making it less flexible for other SoC generations. Move
the call around slightly (after only the very basic, common setup that
applies to all SoC generations has been performed), which will allow
it to be used for other implementations.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-6-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03 21:49:41 +02:00
Thierry Reding
5c9016f0a8 memory: tegra: Push suspend/resume into SoC drivers
Continuing the scheme of unification, push suspend/resume callbacks into
per-SoC driver so that they can be properly parameterized.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-5-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03 21:49:41 +02:00
Thierry Reding
6cc884c1c7 memory: tegra: Introduce struct tegra_mc_ops
Subsequent patches will introduce further callbacks, so create a new
struct tegra_mc_ops to collect all of them in a single place. Move the
existing ->init() callback into the new structure.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-4-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03 21:49:40 +02:00
Thierry Reding
e899993845 memory: tegra: Unify struct tegra_mc across SoC generations
As another step towards unifying both the Tegra210 (and earlier) and
Tegra186 (and later) memory controller drivers, unify the structures
that are used to represent them.

Note that this comes at a slight space penalty since some fields are
not used on all generations, but the benefits of unifying the driver
outweigh the downsides.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-3-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03 21:49:40 +02:00
Thierry Reding
4f1ac76e5e memory: tegra: Consolidate register fields
Subsequent patches will add more register fields to the tegra_mc_client
structure, so consolidate all register field definitions into a common
sub-structure for coherency.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-2-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03 21:49:40 +02:00
Dmitry Osipenko
41bafa698d soc/tegra: pmc: Add driver state syncing
Add driver state syncing that is invoked once all PMC consumers are
attached and ready. The consumers are the power domain clients.
The synchronization callback is invoked once all client drivers are
probed, the driver core handles this for us. This callback informs
PMC driver that all voltage votes are initialized by each PD client
and it's safe to begin voltage scaling of the core power domain.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[treding@nvidia.com: squash DT backwards-compatibility patch]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-02 10:58:55 +02:00
Dmitry Osipenko
30b44e8177 soc/tegra: fuse: Add stubs needed for compile-testing
Add missing stubs that will allow Tegra memory driver to be compile-tested
by kernel build bots.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-01 12:15:13 +02:00
Dmitry Osipenko
b8818de9c0 soc/tegra: Add devm_tegra_core_dev_init_opp_table()
Add common helper which initializes OPP table for Tegra SoC core devices.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-01 12:14:59 +02:00
Dmitry Osipenko
4333e03000 soc/tegra: Add stub for soc_is_tegra()
Add stub required for compile-testing of drivers.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-01 12:14:44 +02:00
Jonathan Neuschäfer
22b5059b95 ARM: imx: Initialize SoC ID on i.MX50
As on i.MX51 and i.MX53, initialize the SoC ID based on the SoC
compatible string of the board.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-13 15:42:21 +08:00
Linus Torvalds
9d31d23389 Networking changes for 5.13.
Core:
 
  - bpf:
 	- allow bpf programs calling kernel functions (initially to
 	  reuse TCP congestion control implementations)
 	- enable task local storage for tracing programs - remove the
 	  need to store per-task state in hash maps, and allow tracing
 	  programs access to task local storage previously added for
 	  BPF_LSM
 	- add bpf_for_each_map_elem() helper, allowing programs to
 	  walk all map elements in a more robust and easier to verify
 	  fashion
 	- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
 	  redirection
 	- lpm: add support for batched ops in LPM trie
 	- add BTF_KIND_FLOAT support - mostly to allow use of BTF
 	  on s390 which has floats in its headers files
 	- improve BPF syscall documentation and extend the use of kdoc
 	  parsing scripts we already employ for bpf-helpers
 	- libbpf, bpftool: support static linking of BPF ELF files
 	- improve support for encapsulation of L2 packets
 
  - xdp: restructure redirect actions to avoid a runtime lookup,
 	improving performance by 4-8% in microbenchmarks
 
  - xsk: build skb by page (aka generic zerocopy xmit) - improve
 	performance of software AF_XDP path by 33% for devices
 	which don't need headers in the linear skb part (e.g. virtio)
 
  - nexthop: resilient next-hop groups - improve path stability
 	on next-hops group changes (incl. offload for mlxsw)
 
  - ipv6: segment routing: add support for IPv4 decapsulation
 
  - icmp: add support for RFC 8335 extended PROBE messages
 
  - inet: use bigger hash table for IP ID generation
 
  - tcp: deal better with delayed TX completions - make sure we don't
 	give up on fast TCP retransmissions only because driver is
 	slow in reporting that it completed transmitting the original
 
  - tcp: reorder tcp_congestion_ops for better cache locality
 
  - mptcp:
 	- add sockopt support for common TCP options
 	- add support for common TCP msg flags
 	- include multiple address ids in RM_ADDR
 	- add reset option support for resetting one subflow
 
  - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
 	co-existence with UDP tunnel GRO, allowing the first to take
 	place correctly	even for encapsulated UDP traffic
 
  - micro-optimize dev_gro_receive() and flow dissection, avoid
 	retpoline overhead on VLAN and TEB GRO
 
  - use less memory for sysctls, add a new sysctl type, to allow using
 	u8 instead of "int" and "long" and shrink networking sysctls
 
  - veth: allow GRO without XDP - this allows aggregating UDP
 	packets before handing them off to routing, bridge, OvS, etc.
 
  - allow specifing ifindex when device is moved to another namespace
 
  - netfilter:
 	- nft_socket: add support for cgroupsv2
 	- nftables: add catch-all set element - special element used
 	  to define a default action in case normal lookup missed
 	- use net_generic infra in many modules to avoid allocating
 	  per-ns memory unnecessarily
 
  - xps: improve the xps handling to avoid potential out-of-bound
 	accesses and use-after-free when XPS change race with other
 	re-configuration under traffic
 
  - add a config knob to turn off per-cpu netdev refcnt to catch
 	underflows in testing
 
 Device APIs:
 
  - add WWAN subsystem to organize the WWAN interfaces better and
    hopefully start driving towards more unified and vendor-
    -independent APIs
 
  - ethtool:
 	- add interface for reading IEEE MIB stats (incl. mlx5 and
 	  bnxt support)
 	- allow network drivers to dump arbitrary SFP EEPROM data,
 	  current offset+length API was a poor fit for modern SFP
 	  which define EEPROM in terms of pages (incl. mlx5 support)
 
  - act_police, flow_offload: add support for packet-per-second
 	policing (incl. offload for nfp)
 
  - psample: add additional metadata attributes like transit delay
 	for packets sampled from switch HW (and corresponding egress
 	and policy-based sampling in the mlxsw driver)
 
  - dsa: improve support for sandwiched LAGs with bridge and DSA
 
  - netfilter:
 	- flowtable: use direct xmit in topologies with IP
 	  forwarding, bridging, vlans etc.
 	- nftables: counter hardware offload support
 
  - Bluetooth:
 	- improvements for firmware download w/ Intel devices
 	- add support for reading AOSP vendor capabilities
 	- add support for virtio transport driver
 
  - mac80211:
 	- allow concurrent monitor iface and ethernet rx decap
 	- set priority and queue mapping for injected frames
 
  - phy: add support for Clause-45 PHY Loopback
 
  - pci/iov: add sysfs MSI-X vector assignment interface
 	to distribute MSI-X resources to VFs (incl. mlx5 support)
 
 New hardware/drivers:
 
  - dsa: mv88e6xxx: add support for Marvell mv88e6393x -
 	11-port Ethernet switch with 8x 1-Gigabit Ethernet
 	and 3x 10-Gigabit interfaces.
 
  - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
 	and BCM63xx switches
 
  - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
 
  - ath11k: support for QCN9074 a 802.11ax device
 
  - Bluetooth: Broadcom BCM4330 and BMC4334
 
  - phy: Marvell 88X2222 transceiver support
 
  - mdio: add BCM6368 MDIO mux bus controller
 
  - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
 
  - mana: driver for Microsoft Azure Network Adapter (MANA)
 
  - Actions Semi Owl Ethernet MAC
 
  - can: driver for ETAS ES58X CAN/USB interfaces
 
 Pure driver changes:
 
  - add XDP support to: enetc, igc, stmmac
  - add AF_XDP support to: stmmac
 
  - virtio:
 	- page_to_skb() use build_skb when there's sufficient tailroom
 	  (21% improvement for 1000B UDP frames)
 	- support XDP even without dedicated Tx queues - share the Tx
 	  queues with the stack when necessary
 
  - mlx5:
 	- flow rules: add support for mirroring with conntrack,
 	  matching on ICMP, GTP, flex filters and more
 	- support packet sampling with flow offloads
 	- persist uplink representor netdev across eswitch mode
 	  changes
 	- allow coexistence of CQE compression and HW time-stamping
 	- add ethtool extended link error state reporting
 
  - ice, iavf: support flow filters, UDP Segmentation Offload
 
  - dpaa2-switch:
 	- move the driver out of staging
 	- add spanning tree (STP) support
 	- add rx copybreak support
 	- add tc flower hardware offload on ingress traffic
 
  - ionic:
 	- implement Rx page reuse
 	- support HW PTP time-stamping
 
  - octeon: support TC hardware offloads - flower matching on ingress
 	and egress ratelimitting.
 
  - stmmac:
 	- add RX frame steering based on VLAN priority in tc flower
 	- support frame preemption (FPE)
 	- intel: add cross time-stamping freq difference adjustment
 
  - ocelot:
 	- support forwarding of MRP frames in HW
 	- support multiple bridges
 	- support PTP Sync one-step timestamping
 
  - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
 	learning, flooding etc.
 
  - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
 	SC7280 SoCs)
 
  - mt7601u: enable TDLS support
 
  - mt76:
 	- add support for 802.3 rx frames (mt7915/mt7615)
 	- mt7915 flash pre-calibration support
 	- mt7921/mt7663 runtime power management fixes
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCKFPIACgkQMUZtbf5S
 Irtw0g/+NA8bWdHNgG4H5rya0pv2z3IieLRmSdDfKRQQXcJpklawc5MKVVaTee/Q
 5/QqgPdCsu1LAU6JXBKsKmyDDaMlQKdWuKbOqDSiAQKoMesZStTEHf9d851ZzgxA
 Cdb6O7BD3lBl/IN+oxNG+KcmD1LKquTPKGySq2mQtEdLO12ekAsranzmj4voKffd
 q9tBShpXQ7Dq77DLYfiQXVCvsizNcbbJFuxX0o9Lpb9+61ZyYAbogZSa9ypiZZwR
 I/9azRBtJg7UV1aD/cLuAfy66Qh7t63+rCxVazs5Os8jVO26P/jQdisnnOe/x+p9
 wYEmKm3GSu0V4SAPxkWW+ooKusflCeqDoMIuooKt6kbP6BRj540veGw3Ww/m5YFr
 7pLQkTSP/tSjuGQIdBE1LOP5LBO8DZeC8Kiop9V0fzAW9hFSZbEq25WW0bPj8QQO
 zA4Z7yWlslvxcfY2BdJX3wD8klaINkl/8fDWZFFsBdfFX2VeLtm7Xfduw34BJpvU
 rYT3oWr6PhtkPAKR32SUcemSfeWgIVU41eSshzRz3kez1NngBUuLlSGGSEaKbes5
 pZVt6pYFFVByyf6MTHFEoQvafZfEw04JILZpo4R5V8iTHzom0kD3Py064sBiXEw2
 B6t+OW4qgcxGblpFkK2lD4kR2s1TPUs0ckVO6sAy1x8q60KKKjY=
 =vcbA
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...
2021-04-29 11:57:23 -07:00
Yangbo Lu
39e5308b32 net: mscc: ocelot: support PTP Sync one-step timestamping
Although HWTSTAMP_TX_ONESTEP_SYNC existed in ioctl for hardware timestamp
configuration, the PTP Sync one-step timestamping had never been supported.

This patch is to truely support it.

- ocelot_port_txtstamp_request()
  This function handles tx timestamp request by storing
  ptp_cmd(tx timestamp type) in OCELOT_SKB_CB(skb)->ptp_cmd,
  and additionally for two-step timestamp storing ts_id in
  OCELOT_SKB_CB(clone)->ptp_cmd.

- ocelot_ptp_rew_op()
  During xmit, this function is called to get rew_op (rewriter option) by
  checking skb->cb for tx timestamp request, and configure to transmitting.

Non-onestep-Sync packet with one-step timestamp request falls back to use
two-step timestamp.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-27 14:10:15 -07:00
Yangbo Lu
682eaad93e net: mscc: ocelot: convert to ocelot_port_txtstamp_request()
Convert to a common ocelot_port_txtstamp_request() for TX timestamp
request handling.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-27 14:10:15 -07:00
Yangbo Lu
c4b364ce12 net: dsa: free skb->cb usage in core driver
Free skb->cb usage in core driver and let device drivers decide to
use or not. The reason having a DSA_SKB_CB(skb)->clone was because
dsa_skb_tx_timestamp() which may set the clone pointer was called
before p->xmit() which would use the clone if any, and the device
driver has no way to initialize the clone pointer.

This patch just put memset(skb->cb, 0, sizeof(skb->cb)) at beginning
of dsa_slave_xmit(). Some new features in the future, like one-step
timestamp may need more bytes of skb->cb to use in
dsa_skb_tx_timestamp(), and p->xmit().

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-27 14:10:15 -07:00
Linus Torvalds
37f00ab4a0 ARM: SoC drivers for v5.13
Updates for SoC specific drivers include a few subsystems that
 have their own maintainers but send them through the soc tree:
 
 TEE/OP-TEE:
  -  Add tracepoints around calls to secure world
 
 Memory controller drivers:
  - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
  - Add debug statistics to Tegra20 memory controller
  - Update Tegra bindings and convert to dtschema
 
 ARM SCMI Firmware:
  - Support for modular SCMI protocols and vendor specific extensions
  - New SCMI IIO driver
  - Per-cpu DVFS
 
 The other driver changes are all from the platform maintainers
 directly and reflect the drivers that don't fit into any other
 subsystem as well as treewide changes for a particular platform.
 
 SoCFPGA:
  - Various cleanups contributed by Krzysztof Kozlowski
 
 Mediatek:
  - add MT8183 support to mutex driver
  - MMSYS: use per SoC array to describe the possible routing
  - add MMSYS support for MT8183 and MT8167
  - add support for PMIC wrapper with integrated arbiter
  - add support for MT8192/MT6873
 
 Tegra:
  - Bug fixes to PMC and clock drivers
 
 NXP/i.MX:
  - Update SCU power domain driver to keep console domain power on.
  - Add missing ADC1 power domain to SCU power domain driver.
  - Update comments for single global power domain in SCU power domain
    driver.
  - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
 
 NXP/FSL SoC driver updates for v5.13
  - Add ACPI support for RCPM driver
  - Use generic io{read,write} for QE drivers after performance optimized
    for PowerPC
  - Fix QBMAN probe to cleanup HW states correctly for kexec
  - Various cleanup and style fix for QBMAN/QE/GUTS drivers
 
 OMAP:
  - Preparation to use devicetree for genpd
  - ti-sysc needs iorange check improved when the interconnect target module
    has no control registers listed
  - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
    issues with missing resources and unnecessary deferred probe
  - ti-sysc debug option can now detect more devices
  - ti-sysc now warns if an old incomplete devicetree data is found as we
    now rely on it being complete for am3 and 4
  - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
  - omap-prm driver needs to enable autoidle retention support for omap4
  - omap5 clocks are missing gpmc and ocmc clock registers
  - pci-dra7xx now needs to use builtin_platform_driver instead of using
    builtin_platform_driver_probe for deferred probe to work
 
 Raspberry Pi:
  - Fix-up all RPi firmware drivers so as for unbind to happen in an
    orderly fashion
  - Support for RPi's PoE hat PWM bus
 
 Qualcomm
  - Improved detection for SCM calling conventions
  - Support for OEM specific wifi firmware path
  - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmCC2JwACgkQmmx57+YA
 GNkgRg//cBtq2NyDbjiNABxFSkmGCfcc0w0C2wjVzr4cfg6BLTbuvvlpZxI912pu
 P1G2sbsdfQJ8sSeIyZos+PilWK0zHrqlaGZfKI19US45dMjpteDBgsPd7wNZwBjQ
 jbops3YLjztZK1HpY4dIdvMnfxt7yRqhBWaTbPuCwQ35c5KsOM8NHB3cP3BUINWK
 x1uuBCv9svppzwdDiPxneV93WKEzabOUo+WBMPyh5vnyvmW17Iif4BA/VKQxzymm
 mWUi8HHpKBpvntJOKwAD2hnLAdpR3SwX20SLOpyLhnJMotbzNUEqq3LdRxDNPdHk
 ry+rarJ78JGlYfpcfegf2bLf5ITNMfOyRGkjtzeYpcZIXPjufOg9DA9YtAy37k0u
 L0T/9gQ+tQ01WGMca77OyUtIqJKdblZrQMfuH/yGlR99bqFQMV7rNc7GNlX1MXp/
 zw4aOYrRWGtGEeAjx5JJWcYydvMSJpCrqxTz3YhgeJECHB2iA6YkV3NROR4TLW//
 tfxaKqxR/KmSqE6hoVOAuuQ0BLXNlql/+4EE6MKsAOBiKPJclvmJg4CyuY8G21ev
 9Su0zJnXMzai7gNu32v1pizGj26+AOhxCEgAG0mGgk2jlQSn24CKgm5e7kCUewcF
 j/1XksNPT95v/K8MsLpXe5xGvF3jhA1BlFfvjJNZOrcZywBXRxg=
 =iidq
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  TEE/OP-TEE:
   - Add tracepoints around calls to secure world

  Memory controller drivers:
   - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
   - Add debug statistics to Tegra20 memory controller
   - Update Tegra bindings and convert to dtschema

  ARM SCMI Firmware:
   - Support for modular SCMI protocols and vendor specific extensions
   - New SCMI IIO driver
   - Per-cpu DVFS

  The other driver changes are all from the platform maintainers
  directly and reflect the drivers that don't fit into any other
  subsystem as well as treewide changes for a particular platform.

  SoCFPGA:
   - Various cleanups contributed by Krzysztof Kozlowski

  Mediatek:
   - add MT8183 support to mutex driver
   - MMSYS: use per SoC array to describe the possible routing
   - add MMSYS support for MT8183 and MT8167
   - add support for PMIC wrapper with integrated arbiter
   - add support for MT8192/MT6873

  Tegra:
   - Bug fixes to PMC and clock drivers

  NXP/i.MX:
   - Update SCU power domain driver to keep console domain power on.
   - Add missing ADC1 power domain to SCU power domain driver.
   - Update comments for single global power domain in SCU power domain
     driver.
   - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.

  NXP/FSL SoC driver updates for v5.13
   - Add ACPI support for RCPM driver
   - Use generic io{read,write} for QE drivers after performance
     optimized for PowerPC
   - Fix QBMAN probe to cleanup HW states correctly for kexec
   - Various cleanup and style fix for QBMAN/QE/GUTS drivers

  OMAP:
   - Preparation to use devicetree for genpd
   - ti-sysc needs iorange check improved when the interconnect target
     module has no control registers listed
   - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
     avoid issues with missing resources and unnecessary deferred probe
   - ti-sysc debug option can now detect more devices
   - ti-sysc now warns if an old incomplete devicetree data is found as
     we now rely on it being complete for am3 and 4
   - soc init code needs to check for prcm and prm nodes for omap4/5 and
     dra7
   - omap-prm driver needs to enable autoidle retention support for
     omap4
   - omap5 clocks are missing gpmc and ocmc clock registers
   - pci-dra7xx now needs to use builtin_platform_driver instead of
     using builtin_platform_driver_probe for deferred probe to work

  Raspberry Pi:
   - Fix-up all RPi firmware drivers so as for unbind to happen in an
     orderly fashion
   - Support for RPi's PoE hat PWM bus

  Qualcomm
   - Improved detection for SCM calling conventions
   - Support for OEM specific wifi firmware path
   - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"

* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: aspeed: fix a ternary sign expansion bug
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
  memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
  clk: socfpga: fix iomem pointer cast on 64-bit
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  soc: fsl: enable acpi support in RCPM driver
  soc: qcom: mdt_loader: Detect truncated read of segments
  soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
  soc: qcom: pdr: Fix error return code in pdr_register_listener
  firmware: qcom_scm: Fix kernel-doc function names to match
  firmware: qcom_scm: Suppress sysfs bind attributes
  firmware: qcom_scm: Workaround lack of "is available" call on SC7180
  firmware: qcom_scm: Reduce locking section for __get_convention()
  firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  ...
2021-04-26 12:11:52 -07:00
Arnd Bergmann
41c39cfc84 NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
 - Use generic io{read,write} for QE drivers after performance optimized
   for PowerPC
 - Fix QBMAN probe to cleanup HW states correctly for kexec
 - Various cleanup and style fix for QBMAN/QE/GUTS drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhb3UXAyxp6UQ0v6khtxQDvusFVQFAmBvf7gACgkQhtxQDvus
 FVTBLxAAgo7FWiVCMD+wnMy3nceAV4U9OZljumEKfvt7g27oMN9i/AWaWwzJ+wsF
 zxMK9p0u8wCTG7PQIGbC4N1fRAaapc1w3TzDhFK4Uf5kqaoddqiFMf4IeRFmnYSF
 6GDbxgxdZkvyGpYJ31Uo750UmC1Q9zmNoh17Nrs2wN12FLFlmiABokklzOuwKBxI
 DLzdgbuTuBxGAv/6zSBmye391C0kf+ky6haOpyzHKToBnYJv/LyaGQGEGckfsnct
 uKnigu7MjU+1l0LhftAT52UoFRR6SeyguqYbq4JAFvNJd66eNpZZpyJnGX8y7hJN
 V8y4cvgeJBZl1ssVQVNA5sJSb9NCyPx0svwZqzJ3kdMWd8t8n2l4FrJSdPnjvCbz
 HRwSzoMmSrQJZp+2LJATSHsHZz5ArBp+o79fLjWf/1aYO92B6MkZvdiL45ATl9uF
 XOQJITdHI1rFWxXmu9rzUcgZx81LEf5jVP+L3GBrOIpPa6R0SQgXLInflVxoB+/l
 SaJRp5CKjBstOvswJlA0dNyMNSn07qNjiR67Gvh7UXGvIa8w0Njv41ZYms2zvErd
 6EIM1SuzrkByrq3zn+AiCNzTATgIJgU+JDq7doKwqCzBW9oBshZ9U3KKDdElqLv9
 2UjMpP5dIkdbjh9vHZ+BwutuSjDwkkJrk40deck+9Q3/ZkNPvug=
 =+DV0
 -----END PGP SIGNATURE-----

Merge tag 'soc-fsl-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.13

- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
  for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers

* tag 'soc-fsl-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: enable acpi support in RCPM driver
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  tty: serial: ucc_uart: replace qe_io{read,write}* wrappers by generic io{read,write}*
  soc: fsl: qe: replace qe_io{read,write}* wrappers by generic io{read,write}*
  soc: fsl: guts: fix comment syntax in file
  soc: fsl: guts: remove unneeded semicolon
  soc: fsl: qe: Use DEFINE_SPINLOCK() for spinlock
  soc: fsl: qbman: Delete useless kfree code
  soc: fsl: qbman: Ensure device cleanup is run for kexec

Link: https://lore.kernel.org/r/20210409205719.27927-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-13 11:06:03 +02:00
Arnd Bergmann
0a8e73301d Memory controller drivers for v5.13 - Tegra SoC
1. Few cleanups.
 2. Add debug statistics to Tegra20 memory controller.
 3. Update bindings and convert to dtschema.  This update is not
    backwards compatible (ABI break) however the broken part was added
    recently (v5.11) and there are no users of it yet.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmBt2ZcQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD12sfEACQYS2TjPwHXmo9hv+fKoYAq4qQ/NOL7YAY
 pN1k42RsDa28/KwoToFkD2WFNpDppSVHVQYjLMjBhjwh7A2x8DOFufm4kOVuhOxI
 u9BAo8iasKh+gmrdLgHcWNXkm881V4mFwSYR+FLQCvrF+1O+CFc1xJ3l9CMMKAvI
 ukJBwriJ2HFWnWXiv0xRTJkjhO8/hK+AuGHLeU0EhskFUIYhaPOm8lQ75KLx6axU
 LFh5lv56zPZcXihWKU1Au3S4Wxb/FEmqkL5HVgqkNEaZYRZH8JhIR2cV5iUukA2o
 ZdWPXaSNtHn7vXAXI+VjRj10+l+qYqktSXv9ukOmd/ofQN6aYDzb0HdPM/QBw/Kz
 VNSK2bPe912oN8a9nD2rePqS/Ny8+AZz0mLkmUbVmhJWuD483pLHZAhK1zyl2Toe
 Zj5l4hSFTUwjr4UBLBlKZmBmz3sYyYUT9k/PDYU+AX52uUPLAdC0piyoEVKZxVDB
 P3XUdAZlhde/BKwVpyBNCDoWgD4SEJfSw7BOYbfVvIyaOBqxh8foMX1C+xCfaxW2
 /dYCDtdjfqSWr2rwiNNtgA8XqiFKeJwthez6xsUHvI7qxPHRRhFCZlLUk0EK9X5h
 hPyESPu01BuXzjp4w4rIX3K4t2ikBDXXOqrdlRr/8C2/Xzk6XQ4VOk/pqFk47hWk
 oJJ3Jg+Nfw==
 =bbW2
 -----END PGP SIGNATURE-----

Merge tag 'memory-controller-drv-tegra-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers

Memory controller drivers for v5.13 - Tegra SoC

1. Few cleanups.
2. Add debug statistics to Tegra20 memory controller.
3. Update bindings and convert to dtschema.  This update is not
   backwards compatible (ABI break) however the broken part was added
   recently (v5.11) and there are no users of it yet.

* tag 'memory-controller-drv-tegra-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  dt-bindings: memory: tegra20: mc: Convert to schema
  dt-bindings: memory: tegra124: emc: Replace core regulator with power domain
  dt-bindings: memory: tegra30: emc: Replace core regulator with power domain
  dt-bindings: memory: tegra20: emc: Replace core regulator with power domain
  memory: tegra: Print out info-level once per driver probe
  memory: tegra20: Protect debug code with a lock
  memory: tegra20: Correct comment to MC_STAT registers writes
  memory: tegra20: Add debug statistics
  memory: tegra: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE

Link: https://lore.kernel.org/r/20210407161333.73013-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08 17:47:49 +02:00
Andy Shevchenko
a460513ed4 time64.h: Consolidated PSEC_PER_SEC definition
We have currently three users of the PSEC_PER_SEC each of them defining it
individually. Instead, move it to time64.h to be available for everyone.

There is a new user coming with the same constant in use. It will also
make its life easier.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-06 16:32:17 -07:00
Christophe Leroy
ccdfc4ae4d Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
This reverts commit 6ac9b61786.

This commit was required because at that time, ioread/iowrite
functions were sub-optimal on powerpc/32 compared to the
architecture specific in_/out_ IO accessors.

But there are now equivalent since
commit 894fa235eb ("powerpc: inline iomap accessors").

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-06 15:40:48 -05:00
Dmitry Osipenko
fbd31f5aa6 memory: tegra20: Add debug statistics
Add debug statistics collection support. The statistics is available
via debugfs in '/sys/kernel/debug/mc/stats', it shows percent of memory
controller utilization for each memory client. This information is
intended to help with debugging of memory performance issues, it already
was proven to be useful by helping to improve memory bandwidth management
of the display driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210319130933.23261-1-digetx@gmail.com
2021-04-01 19:58:22 +02:00
Lee Jones
41dbf4a146 ARM: at91: pm: Move prototypes to mutually included header
Both the caller and the supplier's source file should have access to
the include file containing the prototypes.

Fixes the following W=1 kernel build warning(s):

 drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes]
 1637 | void at91_pinctrl_gpio_suspend(void)
 | ^~~~~~~~~~~~~~~~~~~~~~~~~
 drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes]
 1661 | void at91_pinctrl_gpio_resume(void)
 | ^~~~~~~~~~~~~~~~~~~~~~~~

Cc: Russell King <linux@armlinux.org.uk>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210303124149.3149511-1-lee.jones@linaro.org
2021-03-26 18:20:49 +01:00
Vladimir Oltean
e4bd44e89d net: ocelot: replay switchdev events when joining bridge
The premise of this change is that the switchdev port attributes and
objects offloaded by ocelot might have been missed when we are joining
an already existing bridge port, such as a bonding interface.

The patch pulls these switchdev attributes and objects from the bridge,
on behalf of the 'bridge port' net device which might be either the
ocelot switch interface, or the bonding upper interface.

The ocelot_net.c belongs strictly to the switchdev ocelot driver, while
ocelot.c is part of a library shared with the DSA felix driver.
The ocelot_port_bridge_leave function (part of the common library) used
to call ocelot_port_vlan_filtering(false), something which is not
necessary for DSA, since the framework deals with that already there.
So we move this function to ocelot_switchdev_unsync, which is specific
to the switchdev driver.

The code movement described above makes ocelot_port_bridge_leave no
longer return an error code, so we change its type from int to void.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23 14:49:06 -07:00
Nicolas Saenz Julienne
f663204c9a firmware: raspberrypi: Introduce devm_rpi_firmware_get()
It'll simplify the firmware handling for most consumers.

Suggested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-22 17:59:51 +01:00
Nicolas Saenz Julienne
1e7c57355a firmware: raspberrypi: Keep count of all consumers
When unbinding the firmware device we need to make sure it has no
consumers left. Otherwise we'd leave them with a firmware handle
pointing at freed memory.

Keep a reference count of all consumers and introduce rpi_firmware_put()
which will permit automatically decrease the reference count upon
unbinding consumer drivers.

Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-22 17:59:51 +01:00
Vladimir Oltean
df291e54cc net: ocelot: support multiple bridges
The ocelot switches are a bit odd in that they do not have an STP state
to put the ports into. Instead, the forwarding configuration is delayed
from the typical port_bridge_join into stp_state_set, when the port enters
the BR_STATE_FORWARDING state.

I can only guess that the implementation of this quirk is the reason that
led to the simplification of the driver such that only one bridge could
be offloaded at a time.

We can simplify the data structures somewhat, and introduce a per-port
bridge device pointer and STP state, similar to how the LAG offload
works now (there we have a per-port bonding device pointer and TX
enabled state). This allows offloading multiple bridges with relative
ease, while still keeping in place the quirk to delay the programming of
the PGIDs.

We actually need this change now because we need to remove the bogus
restriction from ocelot_bridge_stp_state_set that ocelot->bridge_mask
needs to contain BIT(port), otherwise that function is a no-op.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 19:13:42 -07:00
Horatiu Vultur
7c588c3e96 net: ocelot: Extend MRP
This patch extends MRP support for Ocelot. It allows to have multiple
rings and when the node has the MRC role it forwards MRP Test frames in
HW. For MRM there is no change.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:49:52 -07:00
Horatiu Vultur
ebb1bb4013 net: ocelot: Add PGID_BLACKHOLE
Add a new PGID that is used not to forward frames anywhere. It is used
by MRP to make sure that MRP Test frames will not reach CPU port.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:49:52 -07:00
Linus Torvalds
8b83369ddc RISC-V Patches for the 5.12 Merge Window
I have a handful of new RISC-V related patches for this merge window:
 
 * A check to ensure drivers are properly using uaccess.  This isn't
   manifesting with any of the drivers I'm currently using, but may catch
   errors in new drivers.
 * Some preliminary support for the FU740, along with the HiFive
   Unleashed it will appear on.
 * NUMA support for RISC-V, which involves making the arm64 code generic.
 * Support for kasan on the vmalloc region.
 * A handful of new drivers for the Kendryte K210, along with the DT
   plumbing required to boot on a handful of K210-based boards.
 * Support for allocating ASIDs.
 * Preliminary support for kernels larger than 128MiB.
 * Various other improvements to our KASAN support, including the
   utilization of huge pages when allocating the KASAN regions.
 
 We may have already found a bug with the KASAN_VMALLOC code, but it's
 passing my tests.  There's a fix in the works, but that will probably
 miss the merge window.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmA4hXATHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYifryD/0SfXGOfj93Cxq7I7AYhhzCN7lJ5jvv
 iEQScTlPqU9nfvYodo4EDq0fp+5LIPpTL/XBHtqVjzv0FqRNa28Ea0K7kO8HuXc4
 BaUd0m/DqyB4Gfgm4qjc5bDneQ1ZYxVXprYERWNQ5Fj+tdWhaQGOW64N/TVodjjj
 NgJtTqbIAcjJqjUtttM8TZN5U1TgwLo+KCqw3iYW12lV1YKBBuvrwvSdD6jnFdIQ
 AzG/wRGZhxLoFxgBB/NEsZxDoSd6ztiwxLhS9lX4okZVsryyIdOE70Q/MflfiTlU
 xE+AdxQXTMUiiqYSmHeDD6PDb57GT/K3hnjI1yP+lIZpbInsi29JKow1qjyYjfHl
 9cSSKYCIXHL7jKU6pgt34G1O5N5+fgqHQhNbfKvlrQ2UPlfs/tWdKHpFIP/z9Jlr
 0vCAou7NSEB9zZGqzO63uBLXoN8yfL8FT3uRnnRvoRpfpex5dQX2QqPLQ7327D7N
 GUG31nd1PHTJPdxJ1cI4SO24PqPpWDWY9uaea+0jv7ivGClVadZPco/S3ZKloguT
 lazYUvyA4oRrSAyln785Rd8vg4CinqTxMtIyZbRMbNkgzVQARi9a8rjvu4n9qms2
 2wlXDFi8nR8B4ih5n79dSiiLM9ay9GJDxMcf9VxIxSAYZV2fJALnpK6gV2fzRBUe
 +k/uv8BIsFmlwQ==
 =CutX
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
 "A handful of new RISC-V related patches for this merge window:

   - A check to ensure drivers are properly using uaccess. This isn't
     manifesting with any of the drivers I'm currently using, but may
     catch errors in new drivers.

   - Some preliminary support for the FU740, along with the HiFive
     Unleashed it will appear on.

   - NUMA support for RISC-V, which involves making the arm64 code
     generic.

   - Support for kasan on the vmalloc region.

   - A handful of new drivers for the Kendryte K210, along with the DT
     plumbing required to boot on a handful of K210-based boards.

   - Support for allocating ASIDs.

   - Preliminary support for kernels larger than 128MiB.

   - Various other improvements to our KASAN support, including the
     utilization of huge pages when allocating the KASAN regions.

  We may have already found a bug with the KASAN_VMALLOC code, but it's
  passing my tests. There's a fix in the works, but that will probably
  miss the merge window.

* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
  riscv: Improve kasan population by using hugepages when possible
  riscv: Improve kasan population function
  riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
  riscv: Improve kasan definitions
  riscv: Get rid of MAX_EARLY_MAPPING_SIZE
  soc: canaan: Sort the Makefile alphabetically
  riscv: Disable KSAN_SANITIZE for vDSO
  riscv: Remove unnecessary declaration
  riscv: Add Canaan Kendryte K210 SD card defconfig
  riscv: Update Canaan Kendryte K210 defconfig
  riscv: Add Kendryte KD233 board device tree
  riscv: Add SiPeed MAIXDUINO board device tree
  riscv: Add SiPeed MAIX GO board device tree
  riscv: Add SiPeed MAIX DOCK board device tree
  riscv: Add SiPeed MAIX BiT board device tree
  riscv: Update Canaan Kendryte K210 device tree
  dt-bindings: add resets property to dw-apb-timer
  dt-bindings: fix sifive gpio properties
  dt-bindings: update sifive uart compatible string
  dt-bindings: update sifive clint compatible string
  ...
2021-02-26 10:28:35 -08:00
Damien Le Moal
c6ca7616f7
clk: Add RISC-V Canaan Kendryte K210 clock driver
Add a clock provider driver for the Canaan Kendryte K210 RISC-V SoC.
This new driver with the compatible string "canaan,k210-clk" implements
support for the full clock structure of the K210 SoC. Since it is
required for the correct operation of the SoC, this driver is
selected by default for compilation when the SOC_CANAAN option is
selected.

With this change, the k210-sysctl driver is turned into a simple
platform driver which enables its power bus clock and triggers
populating its child nodes. The sysctl driver retains the SOC early
initialization code, but the implementation now relies on the new
function k210_clk_early_init() provided by the new clk-k210 driver.

The clock structure implemented and many of the coding ideas for the
driver come from the work by Sean Anderson on the K210 support for the
U-Boot project.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-22 17:51:04 -08:00
Linus Torvalds
d652ea30ba IOMMU Updates for Linux v5.12
Including:
 
 	- ARM SMMU and Mediatek updates from Will Deacon:
 
 		- Support for MT8192 IOMMU from Mediatek
 
 		- Arm v7s io-pgtable extensions for MT8192
 
 		- Removal of TLBI_ON_MAP quirk
 
 		- New Qualcomm compatible strings
 
 		- Allow SVA without hardware broadcast TLB maintenance
 		  on SMMUv3
 
 		- Virtualization Host Extension support for SMMUv3 (SVA)
 
 		- Allow SMMUv3 PMU (perf) driver to be built
 		  independently from IOMMU
 
 	- Some tidy-up in IOVA and core code
 
 	- Conversion of the AMD IOMMU code to use the generic
 	  IO-page-table framework
 
 	- Intel VT-d updates from Lu Baolu:
 
 		- Audit capability consistency among different IOMMUs
 
 		- Add SATC reporting structure support
 
 		- Add iotlb_sync_map callback support
 
 	- SDHI Support for Renesas IOMMU driver
 
 	- Misc Cleanups and other small improvments
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmAz2AcACgkQK/BELZcB
 GuMflRAAyOfXzFqfmniYKxXmxAhOIlibCoojXzecItifdyaFkvUhxCadRg5u3dLH
 IeACDvUiaA5VQnVhjI0a7gCckKdq5YDwwAS+GQICUKNEZtWwrHwm2QTRBmL9MOlA
 v+iTrhYCqZWIAPe16BP5L4u6q4JWS2N9oNmDp6ia1VIhPjfsHU+gXpYKSxiLicmV
 VECAHJk5/JrwKXBP2nMg3ZqGz9RoJc2CzC4zvKu7ADDB9Zl+pXs74mb4ta81Y3G4
 vf07G/ORYJjbMskz5KcmYw2897I9ejMrNaHrYNjlh2IDpGqmoCJ4+8vuVO0zslrm
 GzMOHMshaI653BmuRDHyczwNrNxMxSX3NOeR2fp76d3MSouK7RoFMr7ghMAegp1u
 qmSrqFbgnOT4cdzN8QpPyU22lmVHtQHm0P4EpZZzC95dtJo1nzt8BFrDjPdJDOyZ
 D7oKvZq+OA6MtjCN4gZ2ClxQoiUZ8E/jP1uGIknpzR1oeWnyEFtx8aI9q4yRjNcp
 n8UR7wFqbOIV0O/QC7UlEp/xSpG7BDN4BkvIgbH2qe6LmRmejCrnUWv6pkmPc9sI
 wFgV/Qnh9oo7yf6zvmCsi1r0kmfGLPRe8GB9+eN3wY3xxzDOLJEJNdVghWaP8Rz7
 MBcL/0u8+fMfQlRiOPX64BSIF7fFPY0r0+erINawf1VUbyjUsUE=
 =xSX1
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - ARM SMMU and Mediatek updates from Will Deacon:
     - Support for MT8192 IOMMU from Mediatek
     - Arm v7s io-pgtable extensions for MT8192
     - Removal of TLBI_ON_MAP quirk
     - New Qualcomm compatible strings
     - Allow SVA without hardware broadcast TLB maintenance on SMMUv3
     - Virtualization Host Extension support for SMMUv3 (SVA)
     - Allow SMMUv3 PMU perf driver to be built independently from IOMMU

 - Some tidy-up in IOVA and core code

 - Conversion of the AMD IOMMU code to use the generic IO-page-table
   framework

 - Intel VT-d updates from Lu Baolu:
     - Audit capability consistency among different IOMMUs
     - Add SATC reporting structure support
     - Add iotlb_sync_map callback support

 - SDHI support for Renesas IOMMU driver

 - Misc cleanups and other small improvments

* tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits)
  iommu/amd: Fix performance counter initialization
  MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER
  iommu/mediatek: Fix error code in probe()
  iommu/mediatek: Fix unsigned domid comparison with less than zero
  iommu/vt-d: Parse SATC reporting structure
  iommu/vt-d: Add new enum value and structure for SATC
  iommu/vt-d: Add iotlb_sync_map callback
  iommu/vt-d: Move capability check code to cap_audit files
  iommu/vt-d: Audit IOMMU Capabilities and add helper functions
  iommu/vt-d: Fix 'physical' typos
  iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
  iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration]
  driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3
  MAINTAINERS: Add entry for MediaTek IOMMU
  iommu/mediatek: Add mt8192 support
  iommu/mediatek: Remove unnecessary check in attach_device
  iommu/mediatek: Support master use iova over 32bit
  iommu/mediatek: Add iova reserved function
  iommu/mediatek: Support for multi domains
  iommu/mediatek: Add get_domain_id from dev->dma_range_map
  ...
2021-02-22 10:31:29 -08:00
Linus Torvalds
e767b3530a ARM: SoC drivers for v5.12
Updates for SoC specific drivers include a few subsystems that
 have their own maintainers but send them through the soc tree:
 
 SCMI firmware:
  - add support for a completion interrupt
 
 Reset controllers:
  - new driver for BCM4908
  - new devm_reset_control_get_optional_exclusive_released()
    function
 
 Memory controllers:
  - Renesas RZ/G2 support
  - Tegra124 interconnect support
  - Allow more drivers to be loadable modules
 
 TEE/optee firmware:
  - minor code cleanup
 
 The other half of this is SoC specific drivers that do not
 belong into any other subsystem, most of them living in
 drivers/soc:
 
  - Allwinner/sunxi power management work
  - Allwinner H616 support
 
  - ASpeed AST2600 system identification support
 
  - AT91 SAMA7G5 SoC ID driver
  - AT91 SoC driver cleanups
 
  - Broadcom BCM4908 power management bus support
 
  - Marvell mbus cleanups
 
  - Mediatek MT8167 power domain support
 
  - Qualcomm socinfo driver support for PMIC
  - Qualcomm SoC identification for many more products
 
  - TI Keystone driver cleanups for PRUSS and elsewhere
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmApjS8ACgkQYKtH/8kJ
 UidDyw/6ArE2RWN1qk3GJbQKdCYQdqH4Ig/Nc9LA977ul2BX/BohYoEGCoveH5cG
 16FaYK8tYDCSoTfS0+w1Y8r6TgZKcV6GCM0xLSVtaihk2CO81sUfDFBIppJd614a
 2lGx9DW7205ql4vGcQsK31ncr0hVviHG2e8lOEbFc9SkQpmYuLF1dxW2JK9oWGe2
 rLXHKb20N7AvgN8Y6V0YAOGNpu9MOnx0TbTGn6SMgzIKMkpYaSs/oZY11d9jrn7Y
 m/iIahRWzLFR/lYdrD7Jowpy2A/lcwPdQlRkOiuF1s6FFCqxe1yQsrpcbt/7fXes
 UzOyE494GZFtO0zjFuwglsmiAZDMwO/fQVrIzSGV0SXF8LJpiYYTG1b3Yv5SY5Hr
 r7EF4A7GlmNmd6K1HrXTYJz9tr4oxLDw+9LZGx74JV8x0iK3cd1hRTXb1SbspA6h
 S/KRQsuEjpAyQ6xXWVp2fp6VxZkrjIpPavbcQw2RsoBnbNdrcXahTk96JfpWYGjH
 iyJkEKmCF6/w/s5+xQfy+DYepxFDO0YsPbM7kL5qhaY83KBMOHKJFCUZVWj7md5w
 QIVTeeiSewIlT5bG9XyjIfmsImq1acqTW+QCaxCnvMSsZDBbdhTMK48GwyN9U9+x
 jdQCPQye3TKL2WU6U40FPNIr08QcNy4vmJp4fMqwK5xO3+P+Zhs=
 =I2Zn
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  SCMI firmware:
   - add support for a completion interrupt

  Reset controllers:
   - new driver for BCM4908
   - new devm_reset_control_get_optional_exclusive_released() function

  Memory controllers:
   - Renesas RZ/G2 support
   - Tegra124 interconnect support
   - Allow more drivers to be loadable modules

  TEE/optee firmware:
   - minor code cleanup

  The other half of this is SoC specific drivers that do not belong into
  any other subsystem, most of them living in drivers/soc:

   - Allwinner/sunxi power management work
   - Allwinner H616 support

   - ASpeed AST2600 system identification support

   - AT91 SAMA7G5 SoC ID driver
   - AT91 SoC driver cleanups

   - Broadcom BCM4908 power management bus support

   - Marvell mbus cleanups

   - Mediatek MT8167 power domain support

   - Qualcomm socinfo driver support for PMIC
   - Qualcomm SoC identification for many more products

   - TI Keystone driver cleanups for PRUSS and elsewhere"

* tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits)
  soc: aspeed: socinfo: Add new systems
  soc: aspeed: snoop: Add clock control logic
  memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  memory: samsung: exynos5422-dmc: Correct function names in kerneldoc
  memory: ti-emif-pm: Drop of_match_ptr from of_device_id table
  optee: simplify i2c access
  drivers: soc: atmel: fix type for same7
  tee: optee: remove need_resched() before cond_resched()
  soc: qcom: ocmem: don't return NULL in of_get_ocmem
  optee: sync OP-TEE headers
  tee: optee: fix 'physical' typos
  drivers: optee: use flexible-array member instead of zero-length array
  tee: fix some comment typos in header files
  soc: ti: k3-ringacc: Use of_device_get_match_data()
  soc: ti: pruss: Refactor the CFG sub-module init
  soc: mediatek: pm-domains: Don't print an error if child domain is deferred
  soc: mediatek: pm-domains: Add domain regulator supply
  dt-bindings: power: Add domain regulator supply
  soc: mediatek: cmdq: Remove cmdq_pkt_flush()
  soc: mediatek: pm-domains: Add support for mt8167
  ...
2021-02-20 18:42:28 -08:00
Horatiu Vultur
d8ea7ff399 net: mscc: ocelot: Add support for MRP
Add basic support for MRP. The HW will just trap all MRP frames on the
ring ports to CPU and allow the SW to process them. In this way it is
possible to for this node to behave both as MRM and MRC.

Current limitations are:
- it doesn't support Interconnect roles.
- it supports only a single ring.
- the HW should be able to do forwarding of MRP Test frames so the SW
  will not need to do this. So it would be able to have the role MRC
  without SW support.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 14:47:46 -08:00
Vladimir Oltean
0a6f17c6ae net: dsa: tag_ocelot_8021q: add support for PTP timestamping
For TX timestamping, we use the felix_txtstamp method which is common
with the regular (non-8021q) ocelot tagger. This method says that skb
deferral is needed, prepares a timestamp request ID, and puts a clone of
the skb in a queue waiting for the timestamp IRQ.

felix_txtstamp is called by dsa_skb_tx_timestamp() just before the
tagger's xmit method. In the tagger xmit, we divert the packets
classified by dsa_skb_tx_timestamp() as PTP towards the MMIO-based
injection registers, and we declare them as dead towards dsa_slave_xmit.
If not PTP, we proceed with normal tag_8021q stuff.

Then the timestamp IRQ fires, the clone queued up from felix_txtstamp is
matched to the TX timestamp retrieved from the switch's FIFO based on
the timestamp request ID, and the clone is delivered to the stack.

On RX, thanks to the VCAP IS2 rule that redirects the frames with an
EtherType for 1588 towards two destinations:
- the CPU port module (for MMIO based extraction) and
- if the "no XTR IRQ" workaround is in place, the dsa_8021q CPU port
the relevant data path processing starts in the ptp_classify_raw BPF
classifier installed by DSA in the RX data path (post tagger, which is
completely unaware that it saw a PTP packet).

This time we can't reuse the same implementation of .port_rxtstamp that
also works with the default ocelot tagger. That is because felix_rxtstamp
is given an skb with a freshly stripped DSA header, and it says "I don't
need deferral for its RX timestamp, it's right in it, let me show you";
and it just points to the header right behind skb->data, from where it
unpacks the timestamp and annotates the skb with it.

The same thing cannot happen with tag_ocelot_8021q, because for one
thing, the skb did not have an extraction frame header in the first
place, but a VLAN tag with no timestamp information. So the code paths
in felix_rxtstamp for the regular and 8021q tagger are completely
independent. With tag_8021q, the timestamp must come from the packet's
duplicate delivered to the CPU port module, but there is potentially
complex logic to be handled [ and prone to reordering ] if we were to
just start reading packets from the CPU port module, and try to match
them to the one we received over Ethernet and which needs an RX
timestamp. So we do something simple: we tell DSA "give me some time to
think" (we request skb deferral by returning false from .port_rxtstamp)
and we just drop the frame we got over Ethernet with no attempt to match
it to anything - we just treat it as a notification that there's data to
be processed from the CPU port module's queues. Then we proceed to read
the packets from those, one by one, which we deliver up the stack,
timestamped, using netif_rx - the same function that any driver would
use anyway if it needed RX timestamp deferral. So the assumption is that
we'll come across the PTP packet that triggered the CPU extraction
notification eventually, but we don't know when exactly. Thanks to the
VCAP IS2 trap/redirect rule and the exclusion of the CPU port module
from the flooding replicators, only PTP frames should be present in the
CPU port module's RX queues anyway.

There is just one conflict between the VCAP IS2 trapping rule and the
semantics of the BPF classifier. Namely, ptp_classify_raw() deems
general messages as non-timestampable, but still, those are trapped to
the CPU port module since they have an EtherType of ETH_P_1588. So, if
the "no XTR IRQ" workaround is in place, we need to run another BPF
classifier on the frames extracted over MMIO, to avoid duplicates being
sent to the stack (once over Ethernet, once over MMIO). It doesn't look
like it's possible to install VCAP IS2 rules based on keys extracted
from the 1588 frame headers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14 17:31:44 -08:00
Vladimir Oltean
924ee317f7 net: mscc: ocelot: refactor ocelot_xtr_irq_handler into ocelot_xtr_poll
Since the felix DSA driver will need to poll the CPU port module for
extracted frames as well, let's create some common functions that read
an Extraction Frame Header, and then an skb, from a CPU extraction
group.

We abuse the struct ocelot_ops :: port_to_netdev function a little bit,
in order to retrieve the DSA port net_device or the ocelot switchdev
net_device based on the source port information from the Extraction
Frame Header, but it's all in the benefit of code simplification -
netdev_alloc_skb needs it. Originally, the port_to_netdev method was
intended for parsing act->dev from tc flower offload code.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14 17:31:44 -08:00
Vladimir Oltean
40d3f295b5 net: mscc: ocelot: use common tag parsing code with DSA
The Injection Frame Header and Extraction Frame Header that the switch
prepends to frames over the NPI port is also prepended to frames
delivered over the CPU port module's queues.

Let's unify the handling of the frame headers by making the ocelot
driver call some helpers exported by the DSA tagger. Among other things,
this allows us to get rid of the strange cpu_to_be32 when transmitting
the Injection Frame Header on ocelot, since the packing API uses
network byte order natively (when "quirks" is 0).

The comments above ocelot_gen_ifh talk about setting pop_cnt to 3, and
the cpu extraction queue mask to something, but the code doesn't do it,
so we don't do it either.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14 17:31:44 -08:00
Vladimir Oltean
137ffbc4bb net: mscc: ocelot: refactor ocelot_port_inject_frame out of ocelot_port_xmit
The felix DSA driver will inject some frames through register MMIO, same
as ocelot switchdev currently does. So we need to be able to reuse the
common code.

Also create some shim definitions, since the DSA tagger can be compiled
without support for the switch driver.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14 17:31:44 -08:00
Vladimir Oltean
421741ea56 net: mscc: ocelot: offload bridge port flags to device
We should not be unconditionally enabling address learning, since doing
that is actively detrimential when a port is standalone and not offloading
a bridge. Namely, if a port in the switch is standalone and others are
offloading the bridge, then we could enter a situation where we learn an
address towards the standalone port, but the bridged ports could not
forward the packet there, because the CPU is the only path between the
standalone and the bridged ports. The solution of course is to not
enable address learning unless the bridge asks for it.

We need to set up the initial port flags for no learning and flooding
everything, and also when the port joins and leaves the bridge.
The flood configuration was already configured ok for standalone mode
in ocelot_init, we just need to disable learning in ocelot_init_port.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 17:08:05 -08:00
Vladimir Oltean
b360d94f1b net: mscc: ocelot: use separate flooding PGID for broadcast
In preparation of offloading the bridge port flags which have
independent settings for unknown multicast and for broadcast, we should
also start reserving one destination Port Group ID for the flooding of
broadcast packets, to allow configuring it individually.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 17:08:05 -08:00
David S. Miller
dc9d87581d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2021-02-10 13:30:12 -08:00
Arnd Bergmann
ce8ccf21c0 Qualcomm driver updates for 5.12
The socinfo driver gains support for dumping information about the platform's
 PMICs, as well as new definitions for a number of platforms. The LLCC driver
 gains SM8250 support, AOSS QMP gains SM8350 support and the RPMPD driver gains
 support for MSM8994 power domains. In addition to this it contains a few minor
 fixes in the ocmem, rpmh and llcc drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmAbg1wbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FYYEP/R2zxLPj1ntJmyLV/MWX
 bioEGJWXKk60b2k5lAai2nwD/iswPqMyRtI3eXub7YVoYPRVMDHVl7nuGE83hHES
 r3OUCTisiM5VCOIYjzs9ZJJx4ceGzicsXoV2eEZUabQ4pg2/VHzdbh3DmH+Yh7hL
 PTgEiAYqQRSpRlFTf7ByccuqjAMyhs1GJ3Ajrl9dACsXIrT8ktPqk1UZ6JDl7w+3
 iox86p6EzpcnzgMY1APNgAoMDqHNOMbZky5zvgWEdMXGnpBZGjY8l1XXzIG9ZjE2
 o9u9DnxnCyBJoaxqbsBeHmFux2QCNTggQc4k5fd4BI0vFLR5X4sTyhcG2rEy12st
 LUaSKP9hb4M4JTkbMCvKAgae1FrMArLXAExhsoXopa2QwV0JwbtlE1onaOE4hsGT
 9YmBuJD6auegplIroGbOEihoNrOhPWEiNCX8N9I0daPewY/ulzxqn57Blq1RVXmV
 xs3ifBVyiFTbTD/cFvyDKnLDbgPuaT1bUReG6QHZYzOO/vzshe6JkduNY/RRgRd/
 l/ENBkZ70yQRvImIcbzRgmq767u7zGa7VWrwTmLOe8+5VxxosxZD1sYBioO9N2uL
 pZ5kfAeEAfhn70SX+12SMYIMKxNuvVSCesQNNoBHyMAQX6Y0pbuAyEEyrRdcgodO
 lT1qpN+V2lkjlmzWEiokI3V0
 =rWBX
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for 5.12

The socinfo driver gains support for dumping information about the platform's
PMICs, as well as new definitions for a number of platforms. The LLCC driver
gains SM8250 support, AOSS QMP gains SM8350 support and the RPMPD driver gains
support for MSM8994 power domains. In addition to this it contains a few minor
fixes in the ocmem, rpmh and llcc drivers.

* tag 'qcom-drivers-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: ocmem: don't return NULL in of_get_ocmem
  soc: qcom: socinfo: Remove unwanted le32_to_cpu()
  soc: qcom: aoss: Add SM8350 compatible
  drivers: soc: qcom: rpmpd: Add msm8994 RPM Power Domains
  soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model()
  soc: qcom: socinfo: Fix off-by-one array index bounds check
  soc: qcom: socinfo: Add MDM9607 IDs
  soc: qcom: socinfo: Add SoC IDs for APQ/MSM8998
  soc: qcom: socinfo: Add SoC IDs for 630 family
  soc: qcom: socinfo: Open read access to all for debugfs
  soc: qcom: socinfo: add info from PMIC models array
  soc: qcom: socinfo: add several PMIC IDs
  soc: qcom: socinfo: add qrb5165 SoC ID
  soc: qcom: rpmh: Remove serialization of TCS commands
  soc: qcom: smem: use %*ph to print small buffer
  dt-bindings: soc: qcom: convert qcom,smem bindings to yaml
  drivers: qcom: rpmh-rsc: Do not read back the register write on trigger
  soc: qcom: llcc-qcom: Add support for SM8250 SoC
  soc: qcom: llcc-qcom: Extract major hardware version
  dt-bindings: msm: Add LLCC for SM8250

Link: https://lore.kernel.org/r/20210204052258.388890-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-10 00:14:14 +01:00
Vladimir Oltean
eb4733d7cf net: dsa: felix: implement port flushing on .phylink_mac_link_down
There are several issues which may be seen when the link goes down while
forwarding traffic, all of which can be attributed to the fact that the
port flushing procedure from the reference manual was not closely
followed.

With flow control enabled on both the ingress port and the egress port,
it may happen when a link goes down that Ethernet packets are in flight.
In flow control mode, frames are held back and not dropped. When there
is enough traffic in flight (example: iperf3 TCP), then the ingress port
might enter congestion and never exit that state. This is a problem,
because it is the egress port's link that went down, and that has caused
the inability of the ingress port to send packets to any other port.
This is solved by flushing the egress port's queues when it goes down.

There is also a problem when performing stream splitting for
IEEE 802.1CB traffic (not yet upstream, but a sort of multicast,
basically). There, if one port from the destination ports mask goes
down, splitting the stream towards the other destinations will no longer
be performed. This can be traced down to this line:

	ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);

which should have been instead, as per the reference manual:

	ocelot_port_rmwl(ocelot_port, 0, DEV_MAC_ENA_CFG_RX_ENA,
			 DEV_MAC_ENA_CFG);

Basically only DEV_MAC_ENA_CFG_RX_ENA should be disabled, but not
DEV_MAC_ENA_CFG_TX_ENA - I don't have further insight into why that is
the case, but apparently multicasting to several ports will cause issues
if at least one of them doesn't have DEV_MAC_ENA_CFG_TX_ENA set.

I am not sure what the state of the Ocelot VSC7514 driver is, but
probably not as bad as Felix/Seville, since VSC7514 uses phylib and has
the following in ocelot_adjust_link:

	if (!phydev->link)
		return;

therefore the port is not really put down when the link is lost, unlike
the DSA drivers which use .phylink_mac_link_down for that.

Nonetheless, I put ocelot_port_flush() in the common ocelot.c because it
needs to access some registers from drivers/net/ethernet/mscc/ocelot_rew.h
which are not exported in include/soc/mscc/ and a bugfix patch should
probably not move headers around.

Fixes: bdeced75b1 ("net: dsa: felix: Add PCS operations for PHYLINK")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09 11:41:11 -08:00
Vladimir Oltean
8fe6832e96 net: dsa: felix: propagate the LAG offload ops towards the ocelot lib
The ocelot switch has been supporting LAG offload since its initial
commit, however felix could not make use of that, due to lack of a LAG
abstraction in DSA. Now that we have that, let's forward DSA's calls
towards the ocelot library, who will deal with setting up the bonding.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:51 -08:00
Vladimir Oltean
23ca3b727e net: mscc: ocelot: rebalance LAGs on link up/down events
At present there is an issue when ocelot is offloading a bonding
interface, but one of the links of the physical ports goes down. Traffic
keeps being hashed towards that destination, and of course gets dropped
on egress.

Monitor the netdev notifier events emitted by the bonding driver for
changes in the physical state of lower interfaces, to determine which
ports are active and which ones are no longer.

Then extend ocelot_get_bond_mask to return either the configured bonding
interfaces, or the active ones, depending on a boolean argument. The
code that does rebalancing only needs to do so among the active ports,
whereas the bridge forwarding mask and the logical port IDs still need
to look at the permanently bonded ports.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:51 -08:00
Vladimir Oltean
528d3f190c net: mscc: ocelot: drop the use of the "lags" array
We can now simplify the implementation by always using ocelot_get_bond_mask
to look up the other ports that are offloading the same bonding interface
as us.

In ocelot_set_aggr_pgids, the code had a way to uniquely iterate through
LAGs. We need to achieve the same behavior by marking each LAG as visited,
which we do now by using a temporary 32-bit "visited" bitmask. This is
ok and we do not need dynamic memory allocation, because we know that
this switch architecture will not have more than 32 ports (the PGID port
masks are 32-bit anyway).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:50 -08:00
Vladimir Oltean
b80af65969 net: mscc: ocelot: set up the bonding mask in a way that avoids a net_device
Since this code should be called from pure switchdev as well as from
DSA, we must find a way to determine the bonding mask not by looking
directly at the net_device lowers of the bonding interface, since those
could have different private structures.

We keep a pointer to the bonding upper interface, if present, in struct
ocelot_port. Then the bonding mask becomes the bitwise OR of all ports
that have the same bonding upper interface. This adds a duplication of
functionality with the current "lags" array, but the duplication will be
short-lived, since further patches will remove the latter completely.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:50 -08:00
Arnd Bergmann
60a64da9f0 This pull request contains Broadcom SoCs drivers changes for 5.12,
please pull the following:
 
 - Rafal adds support for the Power Management Bus (PMB) which is used in
   a variety of DSL/Cable modem/STB SoCs with a primary target being the
   4908 Wi-Fi SoC from the DSL organization. He also adds empty stubs to
   get the chip identification (family and revision) to permit the
   Broadcom STB USB PHY driver from being decoupled from ARCH_BRCMSTB
 
 - Florian removes an unused function and its header
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmAXKTQACgkQh9CWnEQH
 BwSyvxAAsOVmytMHBHxe4i8Pad0Yv9sUsV0AvfvJmi0lhd0a1L7HLWBhoYq+fNFO
 R6ycuVjUb9RCA5O9nps6qnWbslEar3h5of/Ku4ovev3I5xQYiGFLOPe75ivoi+sl
 I4T9PwVuWV3WDjK8upA3naUwNzEv30Zw0uFULw5J0RFZAB3W3ObITO3mF8a3aOGc
 uVNWfD+Ro/2l1hrPfO74Qm0r36XQmvRNNOFH3gpKdBZAG2nHkQpfOsoNNUGjBjYm
 amFqm/zfc7Ydxg2WzQwUUaslyq+yIKtn919rFnudR48iHpzpotVuFKgGt3CppCl5
 oF4/1+C6bRzKErPYzn3B6JGFOYwSZwg9+TleDEv7eElIo04FBSOa6pNoHNDEfPXr
 LI9U7CL0/zf8vbkoK3txQg7fdcYvwED9/ip5u2IJ8KZvhoCu175FIZbrXIO+woPC
 gTk28bSBWH4mqGh7fPOmX3fBc2zow7xd/DlTnT1SNy6IVDZL9S82czAS/b2ImBzp
 sfK0fDFrO3cPfrE2/CrKwT/OiMOUsrc0Al7g0rmpPkFHgnrh/ZCV+zQT7RSEvL1P
 Gp3ZFkSjTbrXIZwkJ04i73sJUpC8F8F8XeoFItPs3VGXxJxsapB+b6TuW09qhkvU
 WJXD3gFUL34IXI6luB1ZWNG4/fJBHgWXIrKsBnf9kpZENfHEdKs=
 =43Gr
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.12/drivers' of https://github.com/Broadcom/stblinux into arm/drivers

This pull request contains Broadcom SoCs drivers changes for 5.12,
please pull the following:

- Rafal adds support for the Power Management Bus (PMB) which is used in
  a variety of DSL/Cable modem/STB SoCs with a primary target being the
  4908 Wi-Fi SoC from the DSL organization. He also adds empty stubs to
  get the chip identification (family and revision) to permit the
  Broadcom STB USB PHY driver from being decoupled from ARCH_BRCMSTB

- Florian removes an unused function and its header

* tag 'arm-soc/for-5.12/drivers' of https://github.com/Broadcom/stblinux:
  soc: bcm: brcmstb: Remove soc_is_brcmstb()
  soc: bcm: brcmstb: add stubs for getting platform IDs
  soc: bcm: add PM driver for Broadcom's PMB
  dt-bindings: power: document Broadcom's PMB binding

Link: https://lore.kernel.org/r/20210131221721.685974-5-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02 22:22:03 +01:00
Arnd Bergmann
4d29b82686 Memory controller drivers for v5.12 - Tegra SoC
1. Make the tegra124-emc driver modular.
 2. Add interconnect support to Tegra124 memory controller drivers.
 3. Minor fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmAW7yQQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD18TNEACamr2TM1zSGLu3SHrgSS3MC162ACVIee5Y
 TO+erTi63T+AgiwFgWB8liOPKVVFktS2N9PkDfzWCe58SEoNQCy0K8IAEyjl0fQK
 l7Nst3KtJrX/ui3OUimNYcJu7ap2z0Hn2RXDNhwJVeEkj3vgUc+q6v9/f9HpO59l
 te5FAKc/4waP4uCSb7XiF2i/0xkc5pHI6cBRf4zuepOcxsOOtPprBQvSVino4dbq
 rc+5tNUc27/AaxXnmvD7dgr2N6sxfPHDQ/N+nlj3BLEE/IePJyLqPKSpBlWP2DY9
 gn1x4R6MgxDwYTy/2eBkeo7aLEQEQMk1h4VPKw3dlfjay+XNht4POIFELCK16uJk
 qbg6PAx/YKcaK8BmzXHc6Zvup4VNABjwoFqSz/fkLi+sqRmyI8xclgYaIHqpt0Mx
 AdPV47QdhJYujKf5jBwSeWCfD3Y/KoYaMV41XFWuxO+bMboPhxwez4ISUuXF6SsE
 3igTU3i5x+XlNBH90cUYrEaBfjt6TudMoBcTCWN7U3oRKdDhpLuZZcYGVnn8mNC3
 MOGkIrWIypbtPvfsUqh6miDIaJdLbLJNC3bxuXd+3iOD50b+deX4WnNm144HEQ1c
 n0eRY1HagAFNJNs5dsHSB566YO9S7+B95893yJs7LxrqtwLrpJmshuw55tDO9k46
 MUyITm4Yrw==
 =t+/6
 -----END PGP SIGNATURE-----

Merge tag 'memory-controller-drv-tegra-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers

Memory controller drivers for v5.12 - Tegra SoC

1. Make the tegra124-emc driver modular.
2. Add interconnect support to Tegra124 memory controller drivers.
3. Minor fixes.

* tag 'memory-controller-drv-tegra-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: tegra: Remove calls to dev_pm_opp_set_clkname()
  memory: tegra: Check whether reset is already asserted
  memory: tegra124: Support interconnect framework
  memory: tegra124-emc: Continue probing if timings are missing in device-tree
  memory: tegra124-emc: Make driver modular

Link: https://lore.kernel.org/r/20210131180109.11510-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02 22:20:34 +01:00
Arnd Bergmann
993fd7d6fe Memory controller drivers for v5.12
1. Mediatek SMI: fix PM usage counter and make the driver modular.
 2. Renesas RPC-IF: add support for RZ/G2 series.
 3. Minor fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmAW79UQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1xz2D/9IBQzptHGrRiY83pn+J/cLTaCdontM4NMU
 2f+ShaDWv8KHdG8156eP3ycvZI6lf01kCARhh1xbpvlPTXZU4sLpO6rsQFnyczc/
 JSW5Zfs/dXjkpLAAMFJKgTtw6aG4nIyep3x28WZMgIGf1JFGkiU8W3XMIOt+iv6D
 SivG611E+BFtQQouXIRmL5H7L29nLGnw5wXayhOLeGYdi6pMC3nHT/5TZx2Ld6BO
 5fguXVO5fWroVb6M1FvB8r/l6/JP8F99+dxzg9MZTQt8AHUaxtp/zojUUk0EjI1L
 3ziNqCLE3O7YdFIVD/Ib3u9SYF+GtOpMR0M1CVP2H6O2CaAUndQfyO1cMP5g+DnR
 Fq2D60qgl6RPRhuLui8V+jE24NvI3a4woakx0XTCh7NPWYmG9BLYM4Q4ty+ZPA+N
 ncQGYgCnodFWaCWmSb9wLAvEMHL8E9ja13nYGJo5hbtP34X984lKaDrS44jVllWk
 8y6Qp+qlsIwr8X+y33C5dv0s8txlOt9M1ckkK0GOvD3F+Yr4aR7/cPYyoVv22K7h
 KjcSrbkoRc2ySycBNUq79LOaq6DYcNFje+8M8cWF8BoPddXi1piW50YbDMsu8XKF
 HbuZYMKMVUUuxxENqi00f+WJKHzlLpupP5YYJz7r16B8Wqoa+aJMEr1/lDl8pSpC
 Yo2IIQwgxg==
 =S32T
 -----END PGP SIGNATURE-----

Merge tag 'memory-controller-drv-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers

Memory controller drivers for v5.12

1. Mediatek SMI: fix PM usage counter and make the driver modular.
2. Renesas RPC-IF: add support for RZ/G2 series.
3. Minor fixes.

* tag 'memory-controller-drv-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: mtk-smi: Allow building as module
  memory: ti-aemif: Drop child node when jumping out loop
  memory: mtk-smi: Use platform_register_drivers
  memory: renesas-rpc-if: Add RZ/G2 to Kconfig description
  dt-bindings: memory: renesas,rpc-if: Add support for RZ/G2 Series
  memory: emif: Use DEFINE_SPINLOCK() for spinlock
  memory: mtk-smi: Fix PM usage counter unbalance in mtk_smi ops

Link: https://lore.kernel.org/r/20210131180109.11510-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02 22:19:40 +01:00
Joerg Roedel
d1e3306ba8 Arm SMMU updates for 5.12
- Support for MT8192 IOMMU from Mediatek
 
 - Arm v7s io-pgtable extensions for MT8192
 
 - Removal of TLBI_ON_MAP quirk
 
 - New Qualcomm compatible strings
 
 - Allow SVA without hardware broadcast TLB maintenance on SMMUv3
 
 - Virtualization Host Extension support for SMMUv3 (SVA)
 
 - Allow SMMUv3 PMU (perf) driver to be built independently from IOMMU
 
 - Misc cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmAYD/QQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNLZjCACBK2bCmkVJfs39YeeMhHWVRyiiMpIuCvja
 7WuIqeXnbtAg19hkwPqns+XYeTTnoeo/aSZUS9z8DIDUqADMES+1UUMfVf2mfL3A
 VD1pGRtQezYS+rDOc5dL9m1CcJ2RRY5tfQEjK8Fnm5CItvylNXbURH1nfu1tMVW7
 fn1tMNKCTnY7FkABttKyR4a1XIyFX+fPdSrqd5PjQ7D6rK2ZYrorMf55WpmQEfFu
 3er4F3Xz8nJeTvswPUMNB3ibvcdICM9VcSwFHpElTq2dbHUDDz3uFQwyiXrutEmb
 Xz4UGabjS/ZEPaty6y7VxdYEbD4Q2dzii57jKKtV49N36iCvkSR2
 =5KXT
 -----END PGP SIGNATURE-----

Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu

Arm SMMU updates for 5.12

- Support for MT8192 IOMMU from Mediatek

- Arm v7s io-pgtable extensions for MT8192

- Removal of TLBI_ON_MAP quirk

- New Qualcomm compatible strings

- Allow SVA without hardware broadcast TLB maintenance on SMMUv3

- Virtualization Host Extension support for SMMUv3 (SVA)

- Allow SMMUv3 PMU (perf) driver to be built independently from IOMMU

- Misc cleanups
2021-02-02 13:35:40 +01:00
Yong Wu
8d2c749e52 iommu/mediatek: Support master use iova over 32bit
After extending v7s, our pagetable already support iova reach
16GB(34bit). the master got the iova via dma_alloc_attrs may reach
34bits, but its HW register still is 32bit. then how to set the
bit32/bit33 iova? this depend on a SMI larb setting(bank_sel).

we separate whole 16GB iova to four banks:
bank: 0: 0~4G; 1: 4~8G; 2: 8-12G; 3: 12-16G;
The bank number is (iova >> 32).

We will preassign which bank the larbs belong to. currently we don't
have a interface for master to adjust its bank number.

Each a bank is a iova_region which is a independent iommu-domain.
the iova range for each iommu-domain can't cross 4G.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> #for memory part
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-31-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-02-01 11:31:19 +00:00
Yong Wu
66a2891554 iommu/mediatek: Use the common mtk-memory-port.h
Use the common memory header(larb-port) in the source code.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-9-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-02-01 11:31:16 +00:00
Vladimir Oltean
e21268efbe net: dsa: felix: perform switch setup for tag_8021q
Unlike sja1105, the only other user of the software-defined tag_8021q.c
tagger format, the implementation we choose for the Felix DSA switch
driver preserves full functionality under a vlan_filtering bridge
(i.e. IP termination works through the DSA user ports under all
circumstances).

The tag_8021q protocol just wants:
- Identifying the ingress switch port based on the RX VLAN ID, as seen
  by the CPU. We achieve this by using the TCAM engines (which are also
  used for tc-flower offload) to push the RX VLAN as a second, outer
  tag, on egress towards the CPU port.
- Steering traffic injected into the switch from the network stack
  towards the correct front port based on the TX VLAN, and consuming
  (popping) that header on the switch's egress.

A tc-flower pseudocode of the static configuration done by the driver
would look like this:

$ tc qdisc add dev <cpu-port> clsact
$ for eth in swp0 swp1 swp2 swp3; do \
	tc filter add dev <cpu-port> egress flower indev ${eth} \
		action vlan push id <rxvlan> protocol 802.1ad; \
	tc filter add dev <cpu-port> ingress protocol 802.1Q flower
		vlan_id <txvlan> action vlan pop \
		action mirred egress redirect dev ${eth}; \
done

but of course since DSA does not register network interfaces for the CPU
port, this configuration would be impossible for the user to do. Also,
due to the same reason, it is impossible for the user to inadvertently
delete these rules using tc. These rules do not collide in any way with
tc-flower, they just consume some TCAM space, which is something we can
live with.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 21:25:27 -08:00
Vladimir Oltean
cacea62fcd net: mscc: ocelot: don't use NPI tag prefix for the CPU port module
Context: Ocelot switches put the injection/extraction frame header in
front of the Ethernet header. When used in NPI mode, a DSA master would
see junk instead of the destination MAC address, and it would most
likely drop the packets. So the Ocelot frame header can have an optional
prefix, which is just "ff:ff:ff:ff:ff:fe > ff:ff:ff:ff:ff:ff" padding
put before the actual tag (still before the real Ethernet header) such
that the DSA master thinks it's looking at a broadcast frame with a
strange EtherType.

Unfortunately, a lesson learned in commit 69df578c5f ("net: mscc:
ocelot: eliminate confusion between CPU and NPI port") seems to have
been forgotten in the meanwhile.

The CPU port module and the NPI port have independent settings for the
length of the tag prefix. However, the driver is using the same variable
to program both of them.

There is no reason really to use any tag prefix with the CPU port
module, since that is not connected to any Ethernet port. So this patch
makes the inj_prefix and xtr_prefix variables apply only to the NPI
port (which the switchdev ocelot_vsc7514 driver does not use).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 21:24:30 -08:00
Vladimir Oltean
50c6cc5b92 net: mscc: ocelot: store a namespaced VCAP filter ID
We will be adding some private VCAP filters that should not interfere in
any way with the filters added using tc-flower. So we need to allocate
some IDs which will not be used by tc.

Currently ocelot uses an u32 id derived from the flow cookie, which in
itself is an unsigned long. This is a problem in itself, since on 64 bit
systems, sizeof(unsigned long)=8, so the driver is already truncating
these.

Create a struct ocelot_vcap_id which contains the full unsigned long
cookie from tc, as well as a boolean that is supposed to namespace the
filters added by tc with the ones that aren't.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 21:24:30 -08:00
Vladimir Oltean
0e9bb4e9d9 net: mscc: ocelot: export VCAP structures to include/soc/mscc
The Felix driver will need to preinstall some VCAP filters for its
tag_8021q implementation (outside of the tc-flower offload logic), so
these need to be exported to the common includes.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 21:24:30 -08:00
Florian Fainelli
8b8f095b90 soc: bcm: brcmstb: Remove soc_is_brcmstb()
We have no in tree or out of tree users of this function, remove it and
the header providing its prototype.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-27 09:36:41 -08:00
Yong Wu
50fc8d9232 memory: mtk-smi: Allow building as module
Add support for building the SMI driver as module. Switch MTK_SMI to
tristate, and add module_exit/module_license.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210126060055.11050-1-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2021-01-26 20:47:51 +01:00
Rasmus Villemoes
64a99fe596 ethernet: ucc_geth: remove bd_mem_part and all associated code
The bd_mem_part member of ucc_geth_info always has the value
MEM_PART_SYSTEM, and AFAICT, there has never been any code setting it
to any other value. Moreover, muram is a somewhat precious resource,
so there's no point using that when normal memory serves just as well.

Apart from removing a lot of dead code, this is also motivated by
wanting to clean up the "store result from kmalloc() in a u32" mess.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21 12:19:56 -08:00