Commit Graph

208 Commits

Author SHA1 Message Date
Antti Palosaari
beab1b530e [media] rtl28xxu: silence error log about disabled rtl2832_sdr module
It printed a little bit too heavy looking error log "DVB: Unable to
find symbol rtl2832_sdr_attach()" when staging module was disabled.
Silence that error by introducing own version of dvb_attach() macro
without the error logging.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-15 09:49:12 -03:00
Antti Palosaari
1fd10f98d9 [media] rtl28xxu: do not hard depend on staging SDR module
RTL2832 SDR extension module is currently on staging. SDR module
headers were included from staging causing direct dependency staging
directory. As a solution, add needed headers to main driver.
Motivation of that change comes from Luis / driver backports project.

Reported-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Cc: backports@vger.kernel.org
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-15 09:48:27 -03:00
Antti Palosaari
f5ef59288d [media] rtl28xxu: remove duplicate ID 0458:707f Genius TVGo DVB-T03
That ID was added twice mistakenly.
1st commit ac298ccdde
2nd commit 1c1b873409

Revert commit 1c1b873409

Reported-by: Jan Vcelak <jv@fcelda.cz>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-06 11:18:01 -03:00
Mauro Carvalho Chehab
ed97a6fe53 [media] af9033: Don't export functions for the hardware filter
Exporting functions for hardware filter is a bad idea, as it
breaks compilation if:
	CONFIG_DVB_USB_AF9035=y
	CONFIG_DVB_AF9033=m

Because the PID filter function calls would be hardcoded at
af9035.

The same doesn't happen with af9033_attach() because the
dvb_attach() doesn't hardcode it. Instead, it dynamically
links it at runtime.

However, calling dvb_attach() multiple times is problematic,
as it increments module kref.

So, the better is to pass one parameter for the af9033 module
to fill the hardware filters, and then use it inside af9035.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14 20:26:59 -03:00
Antti Palosaari
b24c2b4fb1 [media] af9035: use af9033 PID filters
PID filters are property of af9033 demod. Use PID filters from af9033
driver as it provides those now.

Allow possible dual mode on USB 1.1 mode too as bandwidth could be
just enough when filters are used on both frontends.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14 20:26:47 -03:00
Antti Palosaari
ae1f8453e8 [media] rtl28xxu: use muxed RTL2832 I2C adapters for E4000 and RTL2832_SDR
RTL2832 driver provides muxed I2C adapters for tuner bus I2C gate
control. Pass those adapters to rtl2832_sdr and e4000 modules in order
to get rid of proprietary DVB .i2c_gate_ctrl() callback use.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14 05:35:24 -03:00
Antti Palosaari
3d0a73aaa9 [media] rtl28xxu: depends on I2C_MUX
We need depend on I2C_MUX as rtl2832 demod used requires it.

All error/warnings:
warning: (DVB_USB_RTL28XXU) selects DVB_RTL2832 which has unmet direct dependencies (MEDIA_SUPPORT && DVB_CORE && I2C && I2C_MUX)
ERROR: "i2c_add_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined!
ERROR: "i2c_del_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined!

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14 05:35:23 -03:00
Antti Palosaari
55cdb7ddf1 [media] rtl28xxu: fix switch-case style issue
Use break, not return, for every case.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14 05:33:22 -03:00
Antti Palosaari
bcf4339357 [media] rtl28xxu: attach SDR extension module
With that extension module it supports SDR.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14 05:33:07 -03:00
Antti Palosaari
e8b4668937 [media] rtl28xxu: constify demod config structs
Optimize a little bit from data to text.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14 05:32:41 -03:00
Antti Palosaari
28fd31f82d [media] e4000: convert DVB tuner to I2C driver model
Driver conversion from proprietary DVB tuner model to more
general I2C driver model.

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14 05:21:27 -03:00
Jan Vcelak
1c1b873409 [media] rtl28xxu: add USB ID for Genius TVGo DVB-T03
0458:707f KYE Systems Corp. (Mouse Systems) TVGo DVB-T03 [RTL2832]

The USB dongle uses RTL2832U demodulator and FC0012 tuner.

Signed-off-by: Jan Vcelak <jv@fcelda.cz>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-12 14:00:45 -03:00
James Hogan
1a1934fab0 [media] rc: abstract access to allowed/enabled protocols
The allowed and enabled protocol masks need to be expanded to be per
filter type in order to support wakeup filter protocol selection. To
ease that process abstract access to the rc_dev::allowed_protos and
rc_dev::enabled_protocols members with inline functions.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11 13:24:39 -03:00
Mauro Carvalho Chehab
c897df0e2d Linux 3.14-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTE+9XAAoJEHm+PkMAQRiGrMQIAKI2V49Kj8WlnwGchFvsbGJB
 SLALwNi33T/IBKdZRhrfryBu02Zj7eVvZ2ML35dJEnmF88O+dJBDMTkKV1xalrip
 mtkBrjUnfAI04fq/daLQ1TsAy4qqlra5tSTuDCw8ILOnGPwT0VydIEHNdtmoUIfw
 xlZLxHzny1MslZ78d7uR/cUnV9ylKRRajWzfw1HT8hL51fCt8nRWY0sCvwvl+kMJ
 LsK+6I7mHDUuzA7QBmBI+dhzQgos5+JkkrnpmqHAqwmIh+AI3ksmjUCQ4dM7owrO
 IvEx+ZNDqxAdLcm1WAxATNfxddFXHc62JTvKuuKqTVWuaxVfK1Aqt8MjDMIPeAQ=
 =yV5u
 -----END PGP SIGNATURE-----

Merge tag 'v3.14-rc5' into patchwork

Linux 3.14-rc5

* tag 'v3.14-rc5': (1117 commits)
  Linux 3.14-rc5
  drm/vmwgfx: avoid null pointer dereference at failure paths
  drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
  drm/vmwgfx: Remove some unused surface formats
  MAINTAINERS: add maintainer entry for Armada DRM driver
  arm64: Fix !CONFIG_SMP kernel build
  arm64: mm: Add double logical invert to pte accessors
  dm cache: fix truncation bug when mapping I/O to >2TB fast device
  perf tools: Fix strict alias issue for find_first_bit
  powerpc/powernv: Fix indirect XSCOM unmangling
  powerpc/powernv: Fix opal_xscom_{read,write} prototype
  powerpc/powernv: Refactor PHB diag-data dump
  powerpc/powernv: Dump PHB diag-data immediately
  powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
  powerpc/ftrace: bugfix for test_24bit_addr
  powerpc/crashdump : Fix page frame number check in copy_oldmem_page
  powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
  kvm, vmx: Really fix lazy FPU on nested guest
  perf tools: fix BFD detection on opensuse
  drm/radeon: enable speaker allocation setup on dce3.2
  ...
2014-03-11 06:55:49 -03:00
Antti Palosaari
5791eee264 [media] rtl2832: remove unused if_dvbt config parameter
All used tuners has get_if_frequency() callback and that parameter
is not needed and will not needed as all upcoming tuner drivers
should implement get_if_frequency().

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-05 15:36:59 -03:00
Antti Palosaari
94b5fa6c20 [media] rtl28xxu: add module parameter to disable IR
Disable IR interrupts in order to avoid SDR sample loss.
IR interrupts causes some extra load for device and it seems
be one reason to loss samples when sampling rate is high.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-05 15:36:26 -03:00
Jan Vcelak
60aa4c6fa5 [media] rtl28xxu: add chipset version comments into device list
Signed-off-by: Jan Vcelak <jv@fcelda.cz>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-28 15:09:11 -03:00
Jan Vcelak
ac298ccdde [media] rtl28xxu: add USB ID for Genius TVGo DVB-T03
0458:707f KYE Systems Corp. (Mouse Systems) TVGo DVB-T03 [RTL2832]

The USB dongle uses RTL2832U demodulator and FC0012 tuner.

Signed-off-by: Jan Vcelak <jv@fcelda.cz>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-28 15:08:54 -03:00
Malcolm Priestley
ec2b1ae9db [media] it913x: dead code Remove driver
Following moving ids to af9035.

This driver is no longer in use.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24 10:47:17 -03:00
Antti Palosaari
14992f0185 [media] af9035: use default i2c slave address for af9035 too
Some device vendors has forgotten set correct slave demod I2C address
to eeprom. Use default I2C address when eeprom has no address at all.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24 10:45:39 -03:00
Malcolm Priestley
37973e01d1 [media] af9035: Add remaining it913x dual ids to af9035
As follow on to patch
af9035: Move it913x single devices to af9035
and patch 1.

SNR is reported as db/10 values.

All dual ids are added to af9035 and it913x driver disabled.

it913x/it913x-fe removal patches to follow.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24 10:45:08 -03:00
Malcolm Priestley
a1310ff4c4 [media] af9035: add default 0x9135 slave I2C address
On some devices the vendor has not set EEPROM_2ND_DEMOD_ADDR.

Checks tmp is not zero after call to get EEPROM_2ND_DEMOD_ADDR and sets the
default slave address of 0x3a on 0x9135 devices.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24 10:41:05 -03:00
Malcolm Priestley
7a541ce08c [media] af9035: Move it913x single devices to af9035
The generic v1 and v2 devices have been all tested.

IDs tested
USB_PID_ITETECH_IT9135 v1 & v2
USB_PID_ITETECH_IT9135_9005 v1
USB_PID_ITETECH_IT9135_9006 v2

Current Issues
There is no signal  on
USB_PID_ITETECH_IT9135 v2

No SNR reported all devices.

All single devices tune and scan fine.

All remotes tested okay.

Dual device failed to register second adapter
USB_PID_KWORLD_UB499_2T_T09
It is not clear what the problem is at the moment.

So only single IDs are transferred in this patch.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24 10:39:37 -03:00
Till Dörges
a24bc323eb [media] rtl28xxu: add ID [0ccd:00b4] TerraTec NOXON DAB Stick (rev 3)
I've got the following DAB USB stick that also works fine with the
DVB_USB_RTL28XXU driver after I added its USB ID:
	Bus 001 Device 009: ID 0ccd:00b4 TerraTec Electronic GmbH

[crope@iki.fi: apply patch partly manually]
Signed-off-by: Till Dörges <till@doerges.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24 10:32:11 -03:00
Mauro Carvalho Chehab
37e59f876b [media, edac] Change my email address
There are several left overs with my old email address.
Remove their occurrences and add myself at CREDITS, to
allow people to be able to reach me on my new addresses.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-07 08:03:07 -02:00
Antti Palosaari
261cb200e7 [media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2
Add USB ID [2040:f900] for Hauppauge WinTV-MiniStick 2.
Device is build upon IT9135 chipset.

Tested-by: Stefan Becker <schtefan@gmx.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04 18:20:50 -02:00
Antti Palosaari
f2e4c5e004 [media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2
Add USB ID [2040:f900] for Hauppauge WinTV-MiniStick 2.
Device is build upon IT9135 chipset.

Tested-by: Stefan Becker <schtefan@gmx.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04 06:38:29 -02:00
Dave Jones
13e1b87c98 [media] mxl111sf: Fix compile when CONFIG_DVB_USB_MXL111SF is unset
Fix the following build error:

drivers/media/usb/dvb-usb-v2/
mxl111sf-tuner.h:72:9: error: expected ‘;’, ‘,’ or ‘)’ before ‘struct’
         struct mxl111sf_tuner_config *cfg)

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04 06:37:32 -02:00
Dave Jones
866e8d8a9d [media] mxl111sf: Fix unintentional garbage stack read
mxl111sf_read_reg takes an address of a variable to write to as an argument.
drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c:mxl111sf_config_pin_mux_modes
passes several uninitialized stack variables to this routine, expecting
them to be filled in.  In the event that something unexpected happens when
reading from the chip, we end up doing a pr_debug of the value passed in,
revealing whatever garbage happened to be on the stack.

Change the pr_debug to match what happens in the 'success' case, where we
assign buf[1] to *data.

Spotted with Coverity (Bugs 731910 through 731917)

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04 06:36:42 -02:00
Michael Krufky
08e1097266 [media] update Michael Krufky's email address
I am no longer available at the kernellabs.com or m1k.net email
addresses.  Update each instance of my email to my linuxtv.org
account.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04 06:34:21 -02:00
Julia Lawall
6c49d79381 [media] ec168: fix error return code
The rest of the function uses ret to store the return value, even setting
ret to i a few lines before this, so return ret instead of i.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07 09:19:03 -02:00
Antti Palosaari
c57f87e623 [media] anysee: fix non-working E30 Combo Plus DVB-T
PLL was attached twice to frontend0 leaving frontend1 without a tuner.
frontend0 is DVB-C and frontend1 is DVB-T.

Cc: stable@vger.kernel.org
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-20 14:24:20 -02:00
Robert Backhaus
d22d32e117 [media] Add USB IDs for Winfast DTV Dongle Mini-D
GIT_AUTHOR_DATE=1386943312
    Add USB IDs for the WinFast DTV Dongle Mini.
    Device is tested and works fine under MythTV

    Signed-off-by: Robert Backhaus <robbak@robbak.com>

Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-19 09:26:15 -02:00
Malcolm Priestley
17f335c304 [media] it913x: Add support for Avermedia H335 id 0x0335
Trivial USB ID addition for Avermedia H335.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-18 10:27:53 -02:00
Mauro Carvalho Chehab
675722b0e3 Merge branch 'upstream-fixes' into patchwork
Merge the media fixes merged upstream for v3.13-rc4

* upstream-fixes: (30 commits)
  [media] videobuf2-dma-sg: fix possible memory leak
  [media] vb2: regression fix: always set length field.
  [media] mt9p031: Include linux/of.h header
  [media] rtl2830: add parent for I2C adapter
  [media] media: marvell-ccic: use devm to release clk
  [media] ths7303: Declare as static a private function
  [media] em28xx-video: Swap release order to avoid lock nesting
  [media] usbtv: Add support for PAL video source
  [media] media_tree: Fix spelling errors
  [media] videobuf2: Add support for file access mode flags for DMABUF exporting
  [media] radio-shark2: Mark shark_resume_leds() inline to kill compiler warning
  [media] radio-shark: Mark shark_resume_leds() inline to kill compiler warning
  [media] af9035: unlock on error in af9035_i2c_master_xfer()
  [media] af9033: fix broken I2C
  [media] v4l: omap3isp: Don't check for missing get_fmt op on remote subdev
  [media] af9035: fix broken I2C and USB I/O
  [media] wm8775: fix broken audio routing
  [media] marvell-ccic: drop resource free in driver remove
  [media] tef6862/radio-tea5764: actually assign clamp result
  [media] cx231xx: use after free on error path in probe
  ...
2013-12-13 05:04:00 -02:00
Antti Palosaari
fe9a2bd881 [media] af9035: add [0413:6a05] Leadtek WinFast DTV Dongle Dual
It is IT9135 dual design.
Thanks to Michael Piko for reporting that!

Reported-by: Michael Piko <michael@piko.com.au>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10 09:09:19 -02:00
Roland Scheidegger
431cb35018 [media] az6007: support Technisat Cablestar Combo HDCI (minus remote)
This is similar to the Terratec H7. It works with the same az6007 firmware as
the former, however the drx-k firmware of the H7 will NOT work. Hence use
a different firmware name. The firmware does not need to exist as the one in
the eeprom is just fine as long as the h7 one doesn't get loaded, but maybe
some day someone wants to load it (the one from the h5 would work too).
Also since the config entry is now different anyway disable support for rc.
AFAIK the Technisat remote (TS35) is RC5 and the code (which a code comment
claims doesn't work anyway) only would handle NEC hence it's pointless creating
a device and polling it if we already know it can't work.
CI is untested.

Originally based on idea found on
http://www.linuxtv.org/wiki/index.php/TechniSat_CableStar_Combo_HD_CI claiming
only id needs to be added (but failed to mention it only worked because the
driver couldn't find the h7 drx-k firmware...).

Signed-off-by: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10 07:15:54 -02:00
Jonathan McCrohan
f58c91ce82 [media] media_tree: Fix spelling errors
Fix various spelling errors in strings and comments throughout the media
tree. The majority of these were found using Lucas De Marchi's codespell
tool.

[m.chehab@samsung.com: discard hunks with conflicts]

Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-09 14:50:50 -02:00
Dan Carpenter
3189ef0290 [media] af9035: unlock on error in af9035_i2c_master_xfer()
We introduced a couple new error paths which are missing unlocks.
Fixes: 7760e14835 ('[media] af9035: Don't use dynamic static allocation')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: stable@vger.kernel.org
2013-12-04 15:27:21 -02:00
Antti Palosaari
9323297dc0 [media] af9035: fix broken I2C and USB I/O
There was three small buffer len calculation bugs which caused
driver non-working. These are coming from recent commit:
commit 7760e14835
[media] af9035: Don't use dynamic static allocation

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: stable@vger.kernel.org
2013-12-04 15:22:58 -02:00
Jonathan McCrohan
39c1cb2b19 [media] media_tree: Fix spelling errors
Fix various spelling errors in strings and comments throughout the media
tree. The majority of these were found using Lucas De Marchi's codespell
tool.

[m.chehab@samsung.com: discard hunks with conflicts]

Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29 14:43:50 -02:00
Antti Palosaari
0c413d1051 [media] af9035: add [0413:6a05] Leadtek WinFast DTV Dongle Dual
It is IT9135 dual design.
Thanks to Michael Piko for reporting that!

Reported-by: Michael Piko <michael@piko.com.au>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29 14:18:33 -02:00
Mauro Carvalho Chehab
c98300a0e8 [media] mxl111sf: Don't use dynamic static allocation
Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
	drivers/media/usb/dvb-usb-v2/mxl111sf.c:74:1: warning: 'mxl111sf_ctrl_msg' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer to be the max size of
a control URB payload data (64 bytes).

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-08 09:45:46 -02:00
Mauro Carvalho Chehab
7760e14835 [media] af9035: Don't use dynamic static allocation
Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
	drivers/media/usb/dvb-usb-v2/af9035.c:142:1: warning: 'af9035_wr_regs' uses dynamic stack allocation [enabled by default]
	drivers/media/usb/dvb-usb-v2/af9035.c:305:1: warning: 'af9035_i2c_master_xfer' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer to be the max size of
a control URB payload data (64 bytes).

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-08 09:45:45 -02:00
Mauro Carvalho Chehab
65e2f1cb3f [media] af9015: Don't use dynamic static allocation
Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
	drivers/media/usb/dvb-usb-v2/af9015.c:433:1: warning: 'af9015_eeprom_hash' uses dynamic stack allocation [enabled by default]
In this specific case, it is a gcc bug, as the size is a const, but
it is easy to just change it from const to a #define, getting rid of
the gcc warning.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-08 09:45:45 -02:00
Antti Palosaari
8fdd33b1bc [media] rtl28xxu: add 15f4:0131 Astrometa DVB-T2
Components are RTL2832P + R828D + MN88472.
Currently support only DVB-T as there is no driver for MN88472 demod.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-31 06:09:56 -02:00
Antti Palosaari
8b4cac1a12 [media] rtl28xxu: add RTL2832P + R828D support
RTL2832P is version of RTL2832U with extra TS interface.
As for now, we support only integrated RTL2832 demod.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-31 06:09:49 -02:00
Antti Palosaari
dd0f5e0b75 [media] dvb_usb_v2: get rid of deferred probe
Deferred probe was added in order to avoid udev vs. Kernel firmware
download problems. It is not needed anymore.
https://bugzilla.redhat.com/show_bug.cgi?id=827538

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18 07:55:06 -03:00
Antti Palosaari
e42efde4e4 [media] lme2510: do not use bInterfaceNumber from dvb_usb_v2
No need to access bInterfaceNumber via dvb_usb_v2 internals as driver
has it already.
That patch is prepare for dvb_usb_v2 deferred probe hack removal. It was
added due to udev firmware loading problems, but things are fixed after
that and it is not needed anymore.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18 07:54:37 -03:00
Antti Palosaari
e2c257f458 [media] dvb-usb-v2: fix Kconfig dependency when RC_CORE=m
It is not allowed to build driver as a build-in when RC_CORE
(remote controller support) is build as a module.
randconfig build error with next-20130719, in drivers/media/usb
drivers/built-in.o: In function `dvb_usbv2_disconnect':
(.text+0x154b39): undefined reference to `rc_unregister_device'
drivers/built-in.o: In function `dvb_usbv2_init_work':
dvb_usb_core.c:(.text+0x155b2d): undefined reference to `rc_allocate_device'
dvb_usb_core.c:(.text+0x155c38): undefined reference to `rc_register_device'
dvb_usb_core.c:(.text+0x155c5b): undefined reference to `rc_free_device'
drivers/built-in.o: In function `anysee_rc_query':
anysee.c:(.text+0x157795): undefined reference to `rc_keydown'

Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-26 10:12:53 -03:00