The use of hrtimers for RCU-tasks grace-period delays works well in
general, but can result in excessive grace-period delays for some
corner-case workloads. This commit therefore reverts to the use of
timers for non-RT kernels to mitigate those grace-period delays.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The synchronous RCU-tasks grace-period-wait primitives invoke
schedule_timeout_idle() to give readers a chance to exit their
read-side critical sections. Unfortunately, this fails during early
boot on PREEMPT_RT because PREEMPT_RT relies solely on ksoftirqd to run
timer handlers. Because ksoftirqd cannot operate until its kthreads
are spawned, there is a brief period of time following scheduler
initialization where PREEMPT_RT cannot run the timer handlers that
schedule_timeout_idle() relies on, resulting in a hang.
To avoid this boot-time hang, this commit replaces schedule_timeout_idle()
with schedule_hrtimeout(), so that the timer expires in hardirq context.
This is ensures that the timer fires even on PREEMPT_RT throughout the
irqs-enabled portions of boot as well as during runtime.
The timer is set to expire between fract and fract + HZ / 2 jiffies in
order to align with any other timers that might expire during that time,
thus reducing the number of wakeups.
Note that RCU-tasks grace periods are infrequent, so the use of hrtimer
should be fine. In contrast, in common-case code, user of hrtimer
could result in performance issues.
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The waitqueue used by rcu_tasks_kthread() has always only one waiter.
With a guaranteed only one waiter, this can be replaced with rcuwait
which is smaller and simpler. With rcuwait based wake counterpart, the
irqwork function (call_rcu_tasks_iw_wakeup()) can be invoked hardirq
context because it is only a wake up and no sleeping locks are involved
(unlike the wait_queue_head).
As a side effect, this is also one piece of the puzzle to pass the RCU
selftest at early boot on PREEMPT_RT.
Replace wait_queue_head with rcuwait and let the irqwork run in hardirq
context on PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU-tasks stall-warning messages are printed after the grace period is ten
minutes old. Unfortunately, most of us will have rebooted the system in
response to an apparently-hung command long before the ten minutes is up,
and will thus see what looks to be a silent hang.
This commit therefore adds pr_info() messages that are printed earlier.
These should avoid being classified as errors, but should give impatient
users a hint. These are controlled by new rcupdate.rcu_task_stall_info
and rcupdate.rcu_task_stall_info_mult kernel-boot parameters. The former
defines the initial delay in jiffies (defaulting to 10 seconds) and the
latter defines the multiplier (defaulting to 3). Thus, by default, the
first message will appear 10 seconds into the RCU-tasks grace period,
the second 40 seconds in, and the third 160 seconds in. There would be
a fourth at 640 seconds in, but the stall warning message appears 600
seconds in, and once a stall warning is printed for a given grace period,
no further informational messages are printed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
While booting secondary CPUs, cpus_read_[lock/unlock] is not keeping
online cpumask stable. The transient online mask results in below
calltrace.
[ 0.324121] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.346652] Detected PIPT I-cache on CPU2
[ 0.347212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.377255] Detected PIPT I-cache on CPU3
[ 0.377823] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.379040] ------------[ cut here ]------------
[ 0.383662] WARNING: CPU: 0 PID: 10 at kernel/workqueue.c:3084 __flush_work+0x12c/0x138
[ 0.384850] Modules linked in:
[ 0.385403] CPU: 0 PID: 10 Comm: rcu_tasks_rude_ Not tainted 5.17.0-rc3-v8+ #13
[ 0.386473] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 0.387289] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.388308] pc : __flush_work+0x12c/0x138
[ 0.388970] lr : __flush_work+0x80/0x138
[ 0.389620] sp : ffffffc00aaf3c60
[ 0.390139] x29: ffffffc00aaf3d20 x28: ffffffc009c16af0 x27: ffffff80f761df48
[ 0.391316] x26: 0000000000000004 x25: 0000000000000003 x24: 0000000000000100
[ 0.392493] x23: ffffffffffffffff x22: ffffffc009c16b10 x21: ffffffc009c16b28
[ 0.393668] x20: ffffffc009e53861 x19: ffffff80f77fbf40 x18: 00000000d744fcc9
[ 0.394842] x17: 000000000000000b x16: 00000000000001c2 x15: ffffffc009e57550
[ 0.396016] x14: 0000000000000000 x13: ffffffffffffffff x12: 0000000100000000
[ 0.397190] x11: 0000000000000462 x10: ffffff8040258008 x9 : 0000000100000000
[ 0.398364] x8 : 0000000000000000 x7 : ffffffc0093c8bf4 x6 : 0000000000000000
[ 0.399538] x5 : 0000000000000000 x4 : ffffffc00a976e40 x3 : ffffffc00810444c
[ 0.400711] x2 : 0000000000000004 x1 : 0000000000000000 x0 : 0000000000000000
[ 0.401886] Call trace:
[ 0.402309] __flush_work+0x12c/0x138
[ 0.402941] schedule_on_each_cpu+0x228/0x278
[ 0.403693] rcu_tasks_rude_wait_gp+0x130/0x144
[ 0.404502] rcu_tasks_kthread+0x220/0x254
[ 0.405264] kthread+0x174/0x1ac
[ 0.405837] ret_from_fork+0x10/0x20
[ 0.406456] irq event stamp: 102
[ 0.406966] hardirqs last enabled at (101): [<ffffffc0093c8468>] _raw_spin_unlock_irq+0x78/0xb4
[ 0.408304] hardirqs last disabled at (102): [<ffffffc0093b8270>] el1_dbg+0x24/0x5c
[ 0.409410] softirqs last enabled at (54): [<ffffffc0081b80c8>] local_bh_enable+0xc/0x2c
[ 0.410645] softirqs last disabled at (50): [<ffffffc0081b809c>] local_bh_disable+0xc/0x2c
[ 0.411890] ---[ end trace 0000000000000000 ]---
[ 0.413000] smp: Brought up 1 node, 4 CPUs
[ 0.413762] SMP: Total of 4 processors activated.
[ 0.414566] CPU features: detected: 32-bit EL0 Support
[ 0.415414] CPU features: detected: 32-bit EL1 Support
[ 0.416278] CPU features: detected: CRC32 instructions
[ 0.447021] Callback from call_rcu_tasks_rude() invoked.
[ 0.506693] Callback from call_rcu_tasks() invoked.
This commit therefore fixes this issue by applying a single-CPU
optimization to the RCU Tasks Rude grace-period process. The key point
here is that the purpose of this RCU flavor is to force a schedule on
each online CPU since some past event. But the rcu_tasks_rude_wait_gp()
function runs in the context of the RCU Tasks Rude's grace-period kthread,
so there must already have been a context switch on the current CPU since
the call to either synchronize_rcu_tasks_rude() or call_rcu_tasks_rude().
So if there is only a single CPU online, RCU Tasks Rude's grace-period
kthread does not need to anything at all.
It turns out that the rcu_tasks_rude_wait_gp() function's call to
schedule_on_each_cpu() causes problems during early boot. During that
time, there is only one online CPU, namely the boot CPU. Therefore,
applying this single-CPU optimization fixes early-boot instances of
this problem.
Link: https://lore.kernel.org/lkml/20220210184319.25009-1-treasure4paddy@gmail.com/T/
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler build,
from the fast-headers tree - including placeholder *_api.h headers for
later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Z8uT
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler
build, from the fast-headers tree - including placeholder *_api.h
headers for later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per
node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
sched/headers: ARM needs asm/paravirt_api_clock.h too
sched/numa: Fix boot crash on arm64 systems
headers/prep: Fix header to build standalone: <linux/psi.h>
sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
cgroup: Fix suspicious rcu_dereference_check() usage warning
sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
sched/deadline,rt: Remove unused functions for !CONFIG_SMP
sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
sched/deadline: Remove unused def_dl_bandwidth
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
sched/tracing: Don't re-read p->state when emitting sched_switch event
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
sched/cpuacct: Remove redundant RCU read lock
sched/cpuacct: Optimize away RCU read lock
sched/cpuacct: Fix charge percpu cpuusage
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmISrYgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg20IAKDZr7rfSHBopjQV
Cocw744tom0XuxpvSZpp2GGOOXF+tkswcNNaRIrbGOl1mkyxA7eBZCTMpDeDS9aQ
wB0D0Gxx8QBAJp4KgB1W7TB+hIGes/rs8Ve+6iO4ulLLdCVWX/q2boI0aZ7QX9O9
qNi8OsoZQtk6falRvciZFHwV5Av1p2Sy1AW57udQ7DvJ4H98AfKf1u8/z208WWW8
1ixC+qJxQcUcM9vI+7P9Tt7NbFSKv8SvAmqjFY7P+DxQAsVw6KXoqVXykDzeOv0t
fUNOE/t0oFZafwtn8h7KBQnwS9lH03+3KkslVZs+iMFyUj/Bar+NVVyKoDhWXtVg
/PuMhEg=
=eU1o
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rc5' into sched/core, to resolve conflicts
New conflicts in sched/core due to the following upstream fixes:
44585f7bc0 ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n")
a06247c680 ("psi: Fix uaf issue when psi trigger is destroyed while being polled")
Conflicts:
include/linux/psi_types.h
kernel/sched/psi.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Refer to housekeeping APIs using single feature types instead of flags.
This prevents from passing multiple isolation features at once to
housekeeping interfaces, which soon won't be possible anymore as each
isolation features will have their own cpumask.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20220207155910.527133-5-frederic@kernel.org
Currently, call_rcu_tasks_generic() sets ->percpu_enqueue_shift to
order_base_2(nr_cpu_ids) upon encountering sufficient contention.
This does not shift to use of non-CPU-0 callback queues as intended, but
rather continues using only CPU 0's queue. Although this does provide
some decrease in contention due to spreading work over multiple locks,
it is not the dramatic decrease that was intended.
This commit therefore makes call_rcu_tasks_generic() set
->percpu_enqueue_shift to 0.
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The ilog2() function can be used to generate a shift count, but it will
generate the same count for a power of two as for one greater than a power
of two. This results in shift counts that are larger than necessary for
systems with a power-of-two number of CPUs because the CPUs are numbered
from zero, so that the maximum CPU number is one less than that power
of two.
This commit therefore substitutes order_base_2(), which appears to have
been designed for exactly this use case.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The ->percpu_enqueue_shift field is used to map from the running CPU
number to the index of the corresponding callback list. This mapping
can change at runtime in response to varying callback load, resulting
in varying levels of contention on the callback-list locks.
Unfortunately, the initial value of this field is correct only if the
system happens to have a power-of-two number of CPUs, otherwise the
callbacks from the high-numbered CPUs can be placed into the callback list
indexed by 1 (rather than 0), and those index-1 callbacks will be ignored.
This can result in soft lockups and hangs.
This commit therefore corrects this mapping, adding one to this shift
count as needed for systems having odd numbers of CPUs.
Fixes: 7a30871b6a ("rcu-tasks: Introduce ->percpu_enqueue_shift for dynamic queue selection")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
By default, when lock contention is encountered, the RCU Tasks flavors
of RCU switch to using per-CPU queueing. However, if the callback
flood ends, per-CPU queueing continues to be used, which introduces
significant additional overhead, especially for callback invocation,
which fans out a series of workqueue handlers.
This commit therefore switches back to single-queue operation if at the
beginning of a grace period there are very few callbacks. The definition
of "very few" is set by the rcupdate.rcu_task_collapse_lim module
parameter, which defaults to 10. This switch happens in two phases,
with the first phase causing future callbacks to be enqueued on CPU 0's
queue, but with all queues continuing to be checked for grace periods
and callback invocation. The second phase checks to see if an RCU grace
period has elapsed and if all remaining RCU-Tasks callbacks are queued
on CPU 0. If so, only CPU 0 is checked for future grace periods and
callback operation.
Of course, the return of contention anywhere during this process will
result in returning to per-CPU callback queueing.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Decreasing the number of callback queues is a bit tricky because it
is necessary to handle callbacks that were queued before the number of
queues decreased, but which were not ready to invoke until afterwards.
This commit takes a first step in this direction by maintaining a separate
->percpu_dequeue_lim to control callback dequeueing, in addition to the
existing ->percpu_enqueue_lim which now controls only enqueueing.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcupdate.rcu_task_enqueue_lim module parameter allows system
administrators to tune the number of callback queues used by the RCU
Tasks flavors. However if callback storms are infrequent, it would
be better to operate with a single queue on a given system unless and
until that system actually needed more queues. Systems not needing
more queues can then avoid the overhead of checking the extra queues
and especially avoid the overhead of fanning workqueue handlers out to
all CPUs to invoke callbacks.
This commit therefore switches to using all the CPUs' callback queues if
call_rcu_tasks_generic() encounters too much lock contention. The amount
of lock contention to tolerate defaults to 100 contended lock acquisitions
per jiffy, and can be adjusted using the new rcupdate.rcu_task_contend_lim
module parameter.
Such switching is undertaken only if the rcupdate.rcu_task_enqueue_lim
module parameter is negative, which is its default value (-1).
This allows savvy systems administrators to set the number of queues
to some known good value and to not have to worry about the kernel doing
any second guessing.
[ paulmck: Apply feedback from Guillaume Tucker and kernelci. ]
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If the caller of of call_rcu_tasks(), call_rcu_tasks_rude(),
or call_rcu_tasks_trace() holds a raw spinlock, and then if
call_rcu_tasks_generic() determines that the grace-period kthread must
be awakened, then the wakeup might acquire a normal spinlock while a
raw spinlock is held. This results in lockdep splats when the
kernel is built with CONFIG_PROVE_RAW_LOCK_NESTING=y.
This commit therefore defers the wakeup using irq_work_queue().
It would be nice to directly invoke wakeup when a raw spinlock is not
held, but there is currently no way to check for this in all kernels.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit converts the unconditional raw_spin_lock_rcu_node() lock
acquisition in call_rcu_tasks_generic() to a trylock followed by an
unconditional acquisition if the trylock fails. If the trylock fails,
the failure is counted, but the count is reset to zero on each new jiffy.
This statistic will be used to determine when to move from a single
callback queue to per-CPU callback queues.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a rcupdate.rcu_task_enqueue_lim module parameter that
sets the initial number of callback queues to use for the RCU Tasks
family of RCU implementations. This parameter allows testing of various
fanout values.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcu_barrier_tasks(), rcu_barrier_tasks_rude(),
and rcu_barrier_tasks_trace() simply invoke the corresponding
synchronize_rcu_tasks*() function. This works because there is only
one callback queue.
However, there will soon be multiple callback queues. This commit
therefore scans the queues currently in use, entraining a callback on
each non-empty queue. Sequence numbers and reference counts are used
to synchronize this process in a manner similar to the approach taken
by rcu_barrier().
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If there is a flood of callbacks, it is necessary to put multiple
CPUs to work invoking those callbacks. This commit therefore uses a
workqueue-flooding approach to parallelize RCU Tasks callback execution.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a rcu_tasks_invoke_cbs() function that invokes all
ready callbacks on all of the per-CPU lists that are currently in use.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a rcu_tasks_need_gpcb() function that returns an
indication of whether another grace period is required, and if no grace
period is required, whether there are callbacks that need to be invoked.
The function scans all per-CPU lists currently in use.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a ->percpu_enqueue_lim field to the rcu_tasks structure.
This field contains two to the power of the ->percpu_enqueue_shift
field, easing construction of iterators over the per-CPU queues that
might contain RCU Tasks callbacks. Such iterators will be introduced
in later commits.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit renames the rcu_tasks_percpu structure's ->cbs_pcpu_lock
to ->lock and then uses spin_lock_rcu_node() and friends to acquire and
release this lock, preparing for upcoming commits that will spread the
grace-period process across multiple CPUs and kthreads.
[ paulmck: Apply feedback from kernel test robot. ]
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves from a bespoke head and tail pointer in the
rcu_tasks_percpu structure to an rcu_segcblist structure, thus allowing
associating the grace-period sequence number with groups of callbacks.
This in turn will allow callbacks to be invoked independently on
different CPUs.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the rcu_tasks structure's ->n_gps grace-period-counter
field to a ->task_gp_seq grce-period sequence number in order to enable
use of the rcu_segcblist structure for the callback lists. This in turn
permits CPUs to lag behind the RCU Tasks grace-period sequence number
without suffering long-term slowdowns in callback invocation.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit introduces a ->percpu_enqueue_shift field to the rcu_tasks
structure, and uses it to shift down the CPU number in order to
select a rcu_tasks_percpu structure. This field is currently set to a
sufficiently large shift count to always select the CPU-0 instance of
the rcu_tasks_percpu structure, and later commits will adjust this.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, RCU Tasks Trace (as well as the other two flavors of RCU Tasks)
use a single global callback list. This works well and is simple, but
expected changes in workload will cause this list to become a bottleneck.
This commit therefore creates per-CPU callback lists for the various
flavors of RCU Tasks, but continues queueing on a single list, namely
that of CPU 0. Later commits will dynamically vary the number of lists
in use to accommodate dynamic changes in workload.
Reported-by: Martin Lau <kafai@fb.com>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Tested-by: kernel test robot <beibei.si@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the check_all_holdout_tasks_trace() function removes all tasks
marked with ->trc_reader_checked from the holdout list, including those
with IPIs pending. This means that the IPI handler might arrive at
a task that has already been removed from the list, which is at best
an accident waiting to happen.
This commit therefore avoids removing tasks with IPIs pending from
the holdout list. This in turn means that the "if" condition in the
for_each_online_cpu() loop in rcu_tasks_trace_postgp() should always
evaluate to false, so a WARN_ON_ONCE() is added to check that.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This pull request contains the following branches:
fixes.2021.10.07a: Miscellaneous fixes.
scftorture.2021.09.16a: smp_call_function torture-test updates, most
notably better checking of module parameters.
tasks.2021.09.15a: Tasks-trace RCU updates that fix a number of rare
but important race-condition bugs.
torture.2021.09.13b: Other torture-test updates, most notably
better checking of module parameters. In addition, rcutorture
may now be run on CONFIG_PREEMPT_RT kernels.
torturescript.2021.09.16a: Torture-test scripting updates, most notably
specifying the new CONFIG_KCSAN_STRICT kconfig option rather
than maintaining an ever-changing list of individual KCSAN
kconfig options.
-----BEGIN PGP SIGNATURE-----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=nmaP
-----END PGP SIGNATURE-----
Merge tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Miscellaneous fixes
- Torture-test updates for smp_call_function(), most notably improved
checking of module parameters.
- Tasks-trace RCU updates that fix a number of rare but important
race-condition bugs.
- Other torture-test updates, most notably better checking of module
parameters. In addition, rcutorture may once again be run on
CONFIG_PREEMPT_RT kernels.
- Torture-test scripting updates, most notably specifying the new
CONFIG_KCSAN_STRICT kconfig option rather than maintaining an
ever-changing list of individual KCSAN kconfig options.
* tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (46 commits)
rcu: Fix rcu_dynticks_curr_cpu_in_eqs() vs noinstr
rcu: Always inline rcu_dynticks_task*_{enter,exit}()
torture: Make kvm-remote.sh print size of downloaded tarball
torture: Allot 1G of memory for scftorture runs
tools/rcu: Add an extract-stall script
scftorture: Warn on individual scf_torture_init() error conditions
scftorture: Count reschedule IPIs
scftorture: Account for weight_resched when checking for all zeroes
scftorture: Shut down if nonsensical arguments given
scftorture: Allow zero weight to exclude an smp_call_function*() category
rcu: Avoid unneeded function call in rcu_read_unlock()
rcu-tasks: Update comments to cond_resched_tasks_rcu_qs()
rcu-tasks: Fix IPI failure handling in trc_wait_for_one_reader
rcu-tasks: Fix read-side primitives comment for call_rcu_tasks_trace
rcu-tasks: Clarify read side section info for rcu_tasks_rude GP primitives
rcu-tasks: Correct comparisons for CPU numbers in show_stalled_task_trace
rcu-tasks: Correct firstreport usage in check_all_holdout_tasks_trace
rcu-tasks: Fix s/rcu_add_holdout/trc_add_holdout/ typo in comment
rcu-tasks: Move RTGS_WAIT_CBS to beginning of rcu_tasks_kthread() loop
rcu-tasks: Fix s/instruction/instructions/ typo in comment
...
Give try_invoke_on_locked_down_task() a saner name and have it return
an int so that the caller might distinguish between different reasons
of failure.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Vasily Gorbik <gor@linux.ibm.com> # on s390
Link: https://lkml.kernel.org/r/20210929152428.649944917@infradead.org
The cond_resched_rcu_qs() function no longer exists, despite being mentioned
several times in kernel/rcu/tasks.h. This commit therefore updates it to
the current cond_resched_tasks_rcu_qs().
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The trc_wait_for_one_reader() function is called at multiple stages
of trace rcu-tasks GP function, rcu_tasks_wait_gp():
- First, it is called as part of per task function -
rcu_tasks_trace_pertask(), for all non-idle tasks. As part of per task
processing, this function add the task in the holdout list and if the
task is currently running on a CPU, it sends IPI to the task's CPU.
The IPI handler takes action depending on whether task is in trace
rcu-tasks read side critical section or not:
- a. If the task is in trace rcu-tasks read side critical section
(t->trc_reader_nesting != 0), the IPI handler sets the task's
->trc_reader_special.b.need_qs, so that this task notifies exit
from its outermost read side critical section (by decrementing
trc_n_readers_need_end) to the GP handling function.
trc_wait_for_one_reader() also increments trc_n_readers_need_end,
so that the trace rcu-tasks GP handler function waits for this
task's read side exit notification. The IPI handler also sets
t->trc_reader_checked to true, and no further IPIs are sent for
this task, for this trace rcu-tasks grace period and this
task can be removed from holdout list.
- b. If the task is in the process of exiting its trace rcu-tasks
read side critical section, (t->trc_reader_nesting < 0), defer
this task's processing to future calls to trc_wait_for_one_reader().
- c. If task is not in rcu-task read side critical section,
t->trc_reader_nesting == 0, ->trc_reader_checked is set for this
task, so that this task is removed from holdout list.
- Second, trc_wait_for_one_reader() is called as part of post scan, in
function rcu_tasks_trace_postscan(), for all idle tasks.
- Third, in function check_all_holdout_tasks_trace(), this function is
called for each task in the holdout list, but only if there isn't
a pending IPI for the task (->trc_ipi_to_cpu == -1). This function
removed the task from holdout list, if IPI handler has completed the
required work, to ensure that the current trace rcu-tasks grace period
either waits for this task, or this task is not in a trace rcu-tasks
read side critical section.
Now, considering the scenario where smp_call_function_single() fails in
first case, inside rcu_tasks_trace_pertask(). In this case,
->trc_ipi_to_cpu is set to the current CPU for that task. This will
result in trc_wait_for_one_reader() getting skipped in third case,
inside check_all_holdout_tasks_trace(), for this task. This further
results in ->trc_reader_checked never getting set for this task,
and the task not getting removed from holdout list. This can cause
the current trace rcu-tasks grace period to stall.
Fix the above problem, by resetting ->trc_ipi_to_cpu to -1, on
smp_call_function_single() failure, so that future IPI calls can
be send for this task.
Note that all three of the trc_wait_for_one_reader() function's
callers (rcu_tasks_trace_pertask(), rcu_tasks_trace_postscan(),
check_all_holdout_tasks_trace()) hold cpu_read_lock(). This means
that smp_call_function_single() cannot race with CPU hotplug, and thus
should never fail. Therefore, also add a warning in order to report
any such failure in case smp_call_function_single() grows some other
reason for failure.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
call_rcu_tasks_trace() does have read-side primitives - rcu_read_lock_trace()
and rcu_read_unlock_trace(). Fix this information in the comments.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU tasks rude variant does not check whether the current
running context on a CPU is usermode. Read side critical section ends
on transition to usermode execution, by the virtue of usermode
execution being schedulable. Clarify this in comments for
call_rcu_tasks_rude() and synchronize_rcu_tasks_rude().
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Valid CPU numbers can be zero or greater, but the checks for
->trc_ipi_to_cpu and tick_nohz_full_cpu()'s argument are for strictly
greater than. This commit therefore corrects the check for no_hz_full
cpu in show_stalled_task_trace() so as to include cpu 0.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In check_all_holdout_tasks_trace(), firstreport is a pointer argument;
so, check the dereferenced value, instead of checking the pointer.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Early in debugging, it made some sense to differentiate the first
iteration from subsequent iterations, but now this just causes confusion.
This commit therefore moves the "set_tasks_gp_state(rtp, RTGS_WAIT_CBS)"
statement to the beginning of the "for" loop in rcu_tasks_kthread().
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The second argument of rcu_read_unlock_trace_special() is always zero.
When called from exit_tasks_rcu_finish_trace(), it is the constant
zero, and rcu_read_unlock_trace_special() doesn't get called from
rcu_read_unlock_trace() unless the value of local variable "nesting"
is zero because in that case the early return is taken instead.
This commit therefore removes the "nesting" argument from the
rcu_read_unlock_trace_special() function, substituting the constant
zero within that function. This commit also adds a WARN_ON_ONCE()
to rcu_read_lock_trace_held() in case non-zeroness some day appears.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, trc_inspect_reader() treats a task exiting its RCU Tasks
Trace read-side critical section the same as being within that critical
section. However, this can fail because that task might have already
checked its .need_qs field, which means that it might never decrement
the all-important trc_n_readers_need_end counter. Of course, for that
to happen, the task would need to never again execute an RCU Tasks Trace
read-side critical section, but this really could happen if the system's
last trampoline was removed. Note that exit from such a critical section
cannot be treated as a quiescent state due to the possibility of nested
critical sections. This means that if trc_inspect_reader() sees a
negative nesting value, it must set up to try again later.
This commit therefore ignores tasks that are exiting their RCU Tasks
Trace read-side critical sections so that they will be rechecked later.
[ paulmck: Apply feedback from Neeraj Upadhyay and Boqun Feng. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, trc_wait_for_one_reader() atomically increments
the trc_n_readers_need_end counter before sending the IPI
invoking trc_read_check_handler(). All failure paths out of
trc_read_check_handler() and also from the smp_call_function_single()
within trc_wait_for_one_reader() must carefully atomically decrement
this counter. This is more complex than it needs to be.
This commit therefore simplifies things and saves a few lines of
code by dispensing with the atomic decrements in favor of having
trc_read_check_handler() do the atomic increment only in the success case.
In theory, this represents no change in functionality.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, RCU Tasks Trace initializes the trc_n_readers_need_end counter
to the value one, increments it before each trc_read_check_handler()
IPI, then decrements it within trc_read_check_handler() if the target
task was in a quiescent state (or if the target task moved to some other
CPU while the IPI was in flight), complaining if the new value was zero.
The rationale for complaining is that the initial value of one must be
decremented away before zero can be reached, and this decrement has not
yet happened.
Except that trc_read_check_handler() is initiated with an asynchronous
smp_call_function_single(), which might be significantly delayed. This
can result in false-positive complaints about the counter reaching zero.
This commit therefore waits for in-flight IPI handlers to complete before
decrementing away the initial value of one from the trc_n_readers_need_end
counter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There are a few remaining locations in kernel/rcu that still use
"&per_cpu()". This commit replaces them with "per_cpu_ptr(&)", and does
not introduce any functional change.
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit replaces the fictitious synchronize_rcu_rude() function with
its real-world synchronize_rcu_tasks_rude() counterpart.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There are several ->trc_reader_special.b.need_qs data races that are
too low-probability for KCSAN to notice, but which will happen sooner
or later. This commit therefore marks these accesses.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There are several ->trc_reader_nesting data races that are too
low-probability for KCSAN to notice, but which will happen sooner or
later. This commit therefore marks these accesses, and comments one
that cannot race.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Accesses to task_struct structures must be either protected by RCU
or by get_task_struct(). Tasks trace RCU uses these in a non-obvious
combination, in conjunction with an IPI handler. This commit therefore
adds comments explaining this usage.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
