When software sets CPT_AF_CTL[RNM_REQ_EN]=1 and RNM in not producing
entropy(i.e., RNM_ENTROPY_STATUS[NORMAL_CNT] < 0x40), the first cycle of
the response may be lost due to a conditional clocking issue. Due to
this, the subsequent random number stream will be corrupted. So, this
patch adds support to ensure RNM_ENTROPY_STATUS[NORMAL_CNT] = 0x40
before writing CPT_AF_CTL[RNM_REQ_EN] = 1, as a workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption.
Fixes: 2e6d793e1b ("crypto: mxs-dcp - Use sg_mapping_iter to copy data")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kernel test rebot report this warning: Uninitialized variable: ret.
The code flow may return value of ret directly. This value is an
uninitialized variable, here is fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the correct print format. Printing an unsigned int value should
use %u instead of %d.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CTR counter is 32bit rollover default on the BD.
But the NIST standard is 128bit rollover. it cause the
testing failed, so need to fix the BD configuration.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the maximum length of AAD for the CCM mode due to the hardware limited.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify the print of information that might lead to user misunderstanding.
Currently only XTS mode need the fallback tfm when using 192bit key.
Others algs not need soft fallback tfm. So others algs can return
directly.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixup icv(integrity check value) checking enabled wrong on
Kunpeng 930
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OcteonTX2 CPT driver will fail to link without devlink support.
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_egrp_delete':
otx2_cpt_devlink.c:18: undefined reference to `devlink_priv'
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_egrp_create':
otx2_cpt_devlink.c:9: undefined reference to `devlink_priv'
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_uc_info':
otx2_cpt_devlink.c:27: undefined reference to `devlink_priv'
Fixes: fed8f4d5f9 ("crypto: octeontx2 - parameters for custom engine groups")
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The logic that detects, enables and disables pfvf interrupts was
expecting a single CSR per VF. Instead, the source and mask register are
two registers with a bit per VF.
Due to this, the driver is reading and setting reserved CSRs and not
masking the correct source of interrupts.
Fix the access to the source and mask register for QAT GEN4 devices by
removing the outer loop in adf_gen4_get_vf2pf_sources(),
adf_gen4_enable_vf2pf_interrupts() and
adf_gen4_disable_vf2pf_interrupts() and changing the helper macros
ADF_4XXX_VM2PF_SOU and ADF_4XXX_VM2PF_MSK.
Fixes: a9dc0d9666 ("crypto: qat - add PFVF support to the GEN4 host driver")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Siming Wan <siming.wan@intel.com>
Signed-off-by: Siming Wan <siming.wan@intel.com>
Reviewed-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When adding hashes support to sun8i-ss, I have added them only on A83T.
But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but
with an incorrect ID.
Anyway, even with correct IDs, hashes do not work on A80 and I cannot
find why.
So let's disable all of them on A80.
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return value from ccp_crypto_enqueue_request() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "ret" variable needs to be signed or there is an error message which
will not be printed correctly.
Fixes: 0cec19c761 ("crypto: qat - add support for compression for 4xxx")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initialize psp_ret inside of __sev_platform_init_locked() because there
are many failure paths with PSP initialization that do not set
__sev_do_cmd_locked().
Fixes: e423b9d75e: ("crypto: ccp - Move SEV_INIT retry for corrupted data")
Signed-off-by: Peter Gonda <pgonda@google.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: John Allen <john.allen@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
partial support for < MAX_ORDER - 1 granularity for virtio-mem
driver_override for vdpa
sysfs ABI documentation for vdpa
multiqueue config support for mlx5 vdpa
Misc fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmHiDHkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpVT4H/3Veixt3uYPOmuLU2tSx+8X+sFTtik81hyiE
okz5fRJrxxA8SqS76FnmO10FS4hlPOGNk0Z5WVhr0yihwFvPLvpCM/xi2Lmrz9I7
pB0sXOIocEL1xApsxukR9K1Twpb2hfYsflbJYUVlRfhS5G0izKJNZp5I7OPrzd80
vVNNDWKW2iLDlfqsavumI4Kvm4nsFuCHG03jzMtcIa7YTXYV3DORD4ZGFFVUOIQN
t5F74TznwHOeYgJeg7TzjFjfPWmXjLetvx10QX1A1uOvwppWW/QY6My0UafTXNXj
VB3gOwJPf+gxXAXl/4bafq4NzM0xys6cpcPpjvhmU+erY4UuyAU=
=Y1eO
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull crypto updates from Herbert Xu:
"Algorithms:
- Drop alignment requirement for data in aesni
- Use synchronous seeding from the /dev/random in DRBG
- Reseed nopr DRBGs every 5 minutes from /dev/random
- Add KDF algorithms currently used by security/DH
- Fix lack of entropy on some AMD CPUs with jitter RNG
Drivers:
- Add support for the D1 variant in sun8i-ce
- Add SEV_INIT_EX support in ccp
- PFVF support for GEN4 host driver in qat
- Compression support for GEN4 devices in qat
- Add cn10k random number generator support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (145 commits)
crypto: af_alg - rewrite NULL pointer check
lib/mpi: Add the return value check of kcalloc()
crypto: qat - fix definition of ring reset results
crypto: hisilicon - cleanup warning in qm_get_qos_value()
crypto: kdf - select SHA-256 required for self-test
crypto: x86/aesni - don't require alignment of data
crypto: ccp - remove unneeded semicolon
crypto: stm32/crc32 - Fix kernel BUG triggered in probe()
crypto: s390/sha512 - Use macros instead of direct IV numbers
crypto: sparc/sha - remove duplicate hash init function
crypto: powerpc/sha - remove duplicate hash init function
crypto: mips/sha - remove duplicate hash init function
crypto: sha256 - remove duplicate generic hash init function
crypto: jitter - add oversampling of noise source
MAINTAINERS: update SEC2 driver maintainers list
crypto: ux500 - Use platform_get_irq() to get the interrupt
crypto: hisilicon/qm - disable qm clock-gating
crypto: omap-aes - Fix broken pm_runtime_and_get() usage
MAINTAINERS: update caam crypto driver maintainers list
crypto: octeontx2 - prevent underflow in get_cores_bmap()
...
- add fast vector/SIMD implementation of the ChaCha20 stream cipher,
which mainly adapts Andy Polyakov's code for the kernel
- add status attribute to AP queue device so users can easily figure
out its status
- fix race in page table release code, and and lots of documentation
- remove uevent suppress from cio device driver, since it turned out
that it generated more problems than it solved problems
- quite a lot of virtual vs physical address confusion fixes
- various other small improvements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=Iy+v
-----END PGP SIGNATURE-----
Merge tag 's390-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Besides all the small improvements and cleanups the most notable part
is the fast vector/SIMD implementation of the ChaCha20 stream cipher,
which is an adaptation of Andy Polyakov's code for the kernel.
Summary:
- add fast vector/SIMD implementation of the ChaCha20 stream cipher,
which mainly adapts Andy Polyakov's code for the kernel
- add status attribute to AP queue device so users can easily figure
out its status
- fix race in page table release code, and and lots of documentation
- remove uevent suppress from cio device driver, since it turned out
that it generated more problems than it solved problems
- quite a lot of virtual vs physical address confusion fixes
- various other small improvements and cleanups all over the place"
* tag 's390-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
s390/dasd: use default_groups in kobj_type
s390/sclp_sd: use default_groups in kobj_type
s390/pci: simplify __pciwb_mio() inline asm
s390: remove unused TASK_SIZE_OF
s390/crash_dump: fix virtual vs physical address handling
s390/crypto: fix compile error for ChaCha20 module
s390/mm: check 2KB-fragment page on release
s390/mm: better annotate 2KB pagetable fragments handling
s390/mm: fix 2KB pgtable release race
s390/sclp: release SCLP early buffer after kernel initialization
s390/nmi: disable interrupts on extended save area update
s390/zcrypt: CCA control CPRB sending
s390/disassembler: update opcode table
s390/uv: fix memblock virtual vs physical address confusion
s390/smp: fix memblock_phys_free() vs memblock_free() confusion
s390/sclp: fix memblock_phys_free() vs memblock_free() confusion
s390/exit: remove dead reference to do_exit from copy_thread
s390/ap: add missing virt_to_phys address conversion
s390/pgalloc: use pointers instead of unsigned long values
s390/pgalloc: add virt/phys address handling to base asce functions
...
The ring reset result values are defined starting from 0x1 instead of 0.
This causes out-of-tree drivers that support this message to understand
that a ring reset failed even if the operation was successful.
Fix by starting the definition of ring reset result values from 0.
Fixes: 0bba03ce97 ("crypto: qat - add PFVF support to enable the reset of ring pairs")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reported-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Building with clang static analysis returns this warning:
qm.c:4382:11: warning: The left operand of '==' is a garbage value
if (*val == 0 || *val > QM_QOS_MAX_VAL || ret) {
~~~~ ^
The call to qm_qos_value_init() can return an error without setting
*val. So check ret before checking *val.
Fixes: 72b010dc33 ("crypto: hisilicon/qm - supports writing QoS int the host")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eliminate the following coccicheck warning:
./drivers/crypto/ccp/sev-dev.c:263:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The include/linux/crypto.h struct crypto_alg field cra_driver_name description
states "Unique name of the transformation provider. " ... " this contains the
name of the chip or provider and the name of the transformation algorithm."
In case of the stm32-crc driver, field cra_driver_name is identical for all
registered transformation providers and set to the name of the driver itself,
which is incorrect. This patch fixes it by assigning a unique cra_driver_name
to each registered transformation provider.
The kernel crash is triggered when the driver calls crypto_register_shashes()
which calls crypto_register_shash(), which calls crypto_register_alg(), which
calls __crypto_register_alg(), which returns -EEXIST, which is propagated
back through this call chain. Upon -EEXIST from crypto_register_shash(), the
crypto_register_shashes() starts unregistering the providers back, and calls
crypto_unregister_shash(), which calls crypto_unregister_alg(), and this is
where the BUG() triggers due to incorrect cra_refcnt.
Fixes: b51dbe9091 ("crypto: stm32 - Support for STM32 CRC32 crypto module")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: <stable@vger.kernel.org> # 4.12+
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@st.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Lionel Debieve <lionel.debieve@st.com>
Cc: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-crypto@vger.kernel.org
Acked-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq() so that interrupt mapping is created on demand.
While at it also store the IRQ number in struct cryp_device_data so that
we don't have to call platform_get_irq() frequently.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For Kunpeng930, if qm clock-gating is enabled, rate limiter
will be inaccurate. Therefore, disable clock-gating before doing task.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This fix is basically the same as 3d6b661330 ("crypto: stm32 -
Revert broken pm_runtime_resume_and_get changes"), just for the omap
driver. If the return value isn't used, then pm_runtime_get_sync()
has to be used for ensuring that the usage count is balanced.
Fixes: 1f34cc4a8d ("crypto: omap-aes - Fix PM reference leak on omap-aes.c")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If we're going to cap "eng_grp->g->engs_num" upper bounds then we should
cap the lower bounds as well.
Fixes: 43ac0b824f ("crypto: octeontx2 - load microcode and create engine groups")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If "egrp" is negative then it is causes an out of bounds access in
eng_grps->grp[].
Fixes: d9d7749773 ("crypto: octeontx2 - add apis for custom engine groups")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the logic required to enable the compression service for 4xxx devices.
This allows to load the compression firmware image and report
the appropriate compression capabilities.
The firmware image selection for a given device is based on the
'ServicesEnabled' key stored in the internal configuration, which is
added statically at the probe of the device according to the following
rule, by default:
- odd numbered devices assigned to compression services
- even numbered devices assigned to crypto services
In addition, restore the 'ServicesEnabled' key, if present, when SRIOV
is enabled on the device.
Signed-off-by: Tomasz Kowalik <tomaszx.kowalik@intel.com>
Co-developed-by: Mateuszx Potrola <mateuszx.potrola@intel.com>
Signed-off-by: Mateuszx Potrola <mateuszx.potrola@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to allow the detection of data compression capabilities for
4xxx devices.
The capability detection logic has been refactored to separate the
crypto capabilities from the compression ones.
This patch is not updating the returned capability mask as, up to now,
4xxx devices are configured only to handle crypto operations.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend support for resetting ring pairs on the device to VFs. Such
reset happens by sending a request to the PF over the PFVF protocol.
This patch defines two new PFVF messages and adds the PFVF logic for
handling the request on PF, triggering the reset, and VFs, accepting the
'success'/'error' response.
This feature is GEN4 specific.
This patch is based on earlier work done by Zelin Deng.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
So far PFVF support for GEN4 devices has been kept effectively disabled
due to lack of support. This patch adds all the GEN4 specific logic to
make PFVF fully functional on PF.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the configuration logic for the VF driver to leverage the
ring-to-service mappings now received via PFVF.
While the driver config logic is not yet capable of supporting
configurations other than the default mapping, make sure that both VF
and PF share the same default configuration in order to work properly.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In addition to retrieving the device capabilities, a VF may also need to
retrieve the mapping of its ring pairs to crypto and or compression
services in order to work properly.
Make the VF receive the ring-to-service mappings from the PF by means of a
new REQ_RING_SVC_MAP Block Message and add the request and response
logic on VF and PF respectively. This change requires to bump the PFVF
protocol to version 4.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The original design and current implementation of the PFVF protocol
expects the sender to both acquire and relinquish the ownership of the
shared CSR by setting and clearing the "in use" pattern on the remote
half of the register when sending a message. This happens regardless of
the acknowledgment of the reception, to guarantee changes, including
collisions, are surely detected.
However, in the case of a request that requires a response, collisions
can also be detected by the lack of a reply. This can be exploited to
speed up and simplify the above behaviour, letting the receiver both
acknowledge the message and release the CSR in a single transaction:
1) the sender can return as soon as the message has been acknowledged
2) the receiver doesn't have to wait long before acquiring ownership
of the CSR for the response message, greatly improving the overall
throughput.
Howerver, this improvement cannot be leveraged for fire-and-forget
notifications, as it would be impossible for the sender to clearly
distinguish between a collision and an ack immediately followed by a new
message.
This patch implements this optimization in a new version of the protocol
(v3), which applies the fast-ack logic only whenever possible and
guarantees backward compatibility with older versions. For requests, a
new retry loop guarantees a correct behaviour.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow the VF driver to get the supported device capabilities through PFVF,
by adding a new block message, the Capability Summary.
This messages allows to exchange the capability through masks, which
report, depending on the Capability Summary version, up to the following
information:
- algorithms and/or services that are supported by the device (e.g.
symmetric crypto, data compression, etc.)
- (extended) compression capabilities, with details about the compression
service (e.g. if compress and verify is supported by this device)
- the frequency of the device
This patch supports the latest Capabilities Summary version 3 for VFs,
but will limit support for the PF driver to version 2. This change also
increases the PFVF protocol to version 2.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GEN2 devices use a single CSR for PFVF messages, which leaves up to 10 bits
of payload per single message. While such amount is sufficient for the
currently defined messages, the transfer of bigger and more complex data
streams from the PF to the VF requires a new mechanism that extends the
protocol.
This patch adds a new layer on top of the basic PFVF messaging, called
Block Messages, to encapsulate up to 126 bytes of data in a single
logical message across multiple PFVF messages of new types (SMALL,
MEDIUM and LARGE BLOCK), including (sub)types (BLKMSG_TYPE) to carry the
information about the actual Block Message.
Regardless of the size, each Block Message uses a two bytes header,
containing the version and size, to allow for extension while
maintaining compatibility. The size and the types of Block Messages are
defined as follow:
- small block messages: up to 16 BLKMSG types of up to 30 bytes
- medium block messages: up to 8 BLKMSG types of up to 62 bytes
- large block messages: up to 4 BLKMSG types of up to 126 bytes
It effectively works as reading a byte at a time from a block device and
for each of these new Block Messages:
- the requestor (always a VF) can either request a specific byte of the
larger message, in order to retrieve the full message, or request the
value of the CRC calculated for a specific message up to the provided
size (to allow for messages to grow while maintaining forward
compatibility)
- the responder (always the PF) will either return a single data or CRC
byte, along with the indication of response type (or error).
This patch provides the basic infrastructure to perform the above
operations, without defining any new message.
As CRCs are required, this code now depends on the CRC8 module.
Note: as a consequence of the Block Messages design, sending multiple
PFVF messages in bursts, the interrupt rate limiting values on the PF are
increased.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This driver relies on either the FW (on the PF) or the PF (on the VF) to
know how crypto services and rings map to one another. Store this
information so that it can be referenced in the future at runtime for
checks or extensions.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds an entry for storing the PFVF protocol version for both
PF and VFs. While not currently used, knowing and storing the remote
protocol version enables more complex compatibility checks and/or newer
features for compatible PFVF endpoints in the future.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Review the ACK timings in adf_gen2_pfvf_send() to improve the latency
by reducing the polling interval. Also increase the timeout, for higher
tolerance in highly loaded systems, and reposition these new values to
allow for inclusion by the future GEN4 devices too.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the polling loop, waiting for the remote end to acknowledge
the reception of the message, with the equivalent and standard
read_poll_timeout() in adf_gen2_pfvf_send().
Also, the use of the read_poll_timeout():
- implies the use of microseconds for the timings, so update the previous
values from ms to us
- allows to leverage the return value for both success and error,
removing the need for the reset of the 'ret' variable soon after the
'start' label.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PFVF protocol defines messages composed of a number of control
bitfields. Replace all the code setting and retrieving such bits
with the utilities from bitfield.h, to improve code quality and
readability.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This implementation of the PFVF protocol was designed around the GEN2
devices and its CSR format. In order to support future generations,
which come with differently sized fields, change the definition of the PFVF
message and make it abstract by means of a new pfvf_message struct. Also,
introduce some utilities to translate to and from the new message format
and the device specific CSR format.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In this implementation of the PFVF protocol every egressing message must
include the ADF_PFVF_MSGORIGIN_SYSTEM flag. However, this flag can be set
on all the outbound messages just before sending them rather than at
message build time, as currently done.
Remove the unnecessary code duplication by setting the
ADF_PFVF_MSGORIGIN_SYSTEM flag only once at send time in
adf_gen2_pfvf_send().
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently PF and VF share the same send and receive logic for the PFVF
protocol. However, the inner behaviour still depends on the specific
direction, requiring a test to determine the if the sender is a PF or a
VF. Moreover the vf_nr parameter is only required for PF2VF messages and
ignored for the opposite direction.
Make the GEN2 send and recv completely direction agnostic, by calculating
and determining any direction specific input in the caller instead, and
feeding the send and the receive functions with the same arguments for
both PF and VF. In order to accommodate for this change, the API of the
pfvf_ops send and recv has been modified to remove any reference to vf_nr.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently PFVF messages are created upfront in the CSR format, that is
PF2VF messages starting from bit 0 and VF2PF from bit 16, and passed
along unmodified to the PFVF send function.
Refactor the code to allow the VF2PF messages to be built starting from
bit 0, as for the PF2VF messages. Shift the VF to PF messages just
before sending them, and refactor the send logic to handle messages
properly depending on the direction.
As a result all the messages are composed the same way regardless of
the direction.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add and use the new helper function adf_get_pmisc_base() where convenient.
Also:
- remove no longer shared variables
- leverage other utilities, such as GET_PFVF_OPS(), as a consequence
- consistently use the "pmisc_addr" name for the returned value of this
new helper
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for triggering a HW reset of a specific ring pair.
Being a device specific feature, add it to the hw_device_data struct.
This feature is supported only by QAT GEN4 devices.
This patch is based on earlier work done by Zelin Deng.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extended the capability detection logic for 4xxx devices.
Mask out unsupported algorithms and services based on the value read in
the fuse register.
This includes only capabilities for the crypto service.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enhance the device capability detection for QAT GEN2 devices to detect if
a device supports the compression service.
This is done by checking both the fuse and the strap registers for c62x
and c3xxx and only the fuse register for dh895xcc.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Set the CIPHER capability for QAT GEN2 devices if the hardware supports
it. This is done if both the CIPHER and the AUTHENTICATION engines are
available on the device.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
