Commit Graph

93 Commits

Author SHA1 Message Date
CrazyCat
a0f629b975 [media] cxusb: Geniatech T230 support
Geniatech Mygica T230 DVB-T/T2/C USB stick support.

Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 09:15:54 -02:00
Mauro Carvalho Chehab
47a09af68b Merge tag 'v3.18-rc4' into patchwork
Needed due to some important regression fixes at RC core.

* commit 'v3.18-rc4': (587 commits)
  Linux 3.18-rc4
  ARM: dts: zynq: Enable PL clocks for Parallella
  tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
  tiny: reverse logic for DISABLE_DEV_COREDUMP
  i2c: core: Dispose OF IRQ mapping at client removal time
  i2c: at91: don't account as iowait
  i2c: remove FSF address
  USB: Update default usb-storage delay_use value in kernel-parameters.txt
  sysfs: driver core: Fix glue dir race condition by gdp_mutex
  MIPS: Fix build with binutils 2.24.51+
  xfs: track bulkstat progress by agino
  xfs: bulkstat error handling is broken
  xfs: bulkstat main loop logic is a mess
  xfs: bulkstat chunk-formatter has issues
  xfs: bulkstat chunk formatting cursor is broken
  xfs: bulkstat btree walk doesn't terminate
  mm: Fix comment before truncate_setsize()
  USB: cdc-acm: add quirk for control-line state requests
  tty: Fix pty master poll() after slave closes v2
  MIPS: R3000: Fix debug output for Virtual page number
  ...

Conflicts:
	drivers/media/rc/rc-main.c
2014-11-11 08:37:35 -02:00
Akihiro Tsukada
8e281fafda [media] dvb-core: set default properties of ISDB-S
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 16:40:09 -02:00
Dan Carpenter
373145282e [media] media: dvb_core: replace a magic number by a macro
It's better to use TS_SC instead of magic number 0xC0.

[m.chehab@samsung.com: patch rebased and message rewritten, as this
 patch conflicted with an already applied patch]

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:50:08 -02:00
Joe Perches
f491dbe049 [media] dvb-net: Fix probable mask then right shift defects
Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.

Add parentheses around the mask.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:40:10 -02:00
Mauro Carvalho Chehab
71d1b2bec0 [media] dvb_frontend: Fix __user namespace
As reported by smatch:

drivers/media/dvb-core/dvb_frontend.c:1960:45: warning: incorrect type in argument 2 (different address spaces)
drivers/media/dvb-core/dvb_frontend.c:1960:45:    expected void const [noderef] <asn:1>*from
drivers/media/dvb-core/dvb_frontend.c:1960:45:    got struct dtv_property *[noderef] <asn:1>props
drivers/media/dvb-core/dvb_frontend.c:1992:45: warning: incorrect type in argument 2 (different address spaces)
drivers/media/dvb-core/dvb_frontend.c:1992:45:    expected void const [noderef] <asn:1>*from
drivers/media/dvb-core/dvb_frontend.c:1992:45:    got struct dtv_property *[noderef] <asn:1>props
drivers/media/dvb-core/dvb_frontend.c:2014:38: warning: incorrect type in argument 1 (different address spaces)
drivers/media/dvb-core/dvb_frontend.c:2014:38:    expected void [noderef] <asn:1>*to
drivers/media/dvb-core/dvb_frontend.c:2014:38:    got struct dtv_property *[noderef] <asn:1>props
drivers/media/dvb-core/dvb_frontend.c:1946:17: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1947:17: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1951:22: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1951:42: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1954:31: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1960:41: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1960:54: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1965:33: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1978:17: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1979:17: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1983:22: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1983:42: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1986:31: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1992:41: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:1992:54: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:2007:33: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:2014:34: warning: dereference of noderef expression
drivers/media/dvb-core/dvb_frontend.c:2014:52: warning: dereference of noderef expression

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26 06:47:52 -03:00
Olli Salonen
5b5560842a [media] af9035: Add support for IT930x USB bridge
Add support for IT930x USB bridge and IT9303 reference design.

It is a DVB-T/T2/C tuner with the following components:
- IT9303 USB bridge
- Si2168-B40 demodulator
- Si2147-A30 tuner

The IT9303 requires firmware that can be downloaded here:
http://trsqr.net/olli/linux/firmwares/it930x/

The Si2168-B40 requires firmware, but the one that is used by PCTV 292e can be used.
http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/

The Si2147-A30 tuner does not require firmware loading.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23 21:49:42 -03:00
Mauro Carvalho Chehab
3cf0c6bd68 Merge remote-tracking branch 'linus/master' into patchwork
There are some patches that depends on media-v3.16-rc6.
So, merge back from upstream before applying them.

* linus/master: (1123 commits)
  drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
  drm/bochs: add missing drm_connector_register call
  drm/cirrus: add missing drm_connector_register call
  staging: vt6655: buffer overflow in ioctl
  USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
  USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
  USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
  USB: EHCI: unlink QHs even after the controller has stopped
  [SCSI] fix for bidi use after free
  [SCSI] fix regression that accidentally disabled block-based tcq
  [SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
  drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
  drm/nouveau/runpm: fix module unload
  drm/radeon/px: fix module unload
  vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
  drm/radeon: don't reset dma on r6xx-evergreen init
  drm/radeon: don't reset sdma on CIK init
  drm/radeon: don't reset dma on NI/SI init
  drm/radeon/dpm: fix resume on mullins
  drm/radeon: Disable HDP flush before every CS again for < r600
  ...
2014-09-21 16:40:04 -03:00
Mauro Carvalho Chehab
04da2daee3 [media] ngene: properly handle __user ptr
Sparse is complaining about ngene's bad usage of a __user ptr:

>> drivers/media/pci/ngene/ngene-dvb.c:62:48: sparse: incorrect type in argument 2 (different address spaces)
   drivers/media/pci/ngene/ngene-dvb.c:62:48:    expected unsigned char const [usertype] *buf
   drivers/media/pci/ngene/ngene-dvb.c:62:48:    got char const [noderef] <asn:1>*buf

As this is intercepting a .write() file ops, we can't just memcpy. We need to use
copy_from_user.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-08 10:00:52 -03:00
Malcolm Priestley
a04646c045 [media] af9035: new IDs: add support for PCTV 78e and PCTV 79e
add the following IDs
USB_PID_PCTV_78E (0x025a) for PCTV 78e
USB_PID_PCTV_79E (0x0262) for PCTV 79e

For these it9135 devices.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04 12:24:19 -03:00
Mauro Carvalho Chehab
313ddec45c [media] dmxdev: don't use before checking file->private_data
As reported by smatch:
	drivers/media/dvb-core/dmxdev.c:1091 dvb_demux_poll() warn: variable dereferenced before check 'dmxdevfilter' (see line 1088)

This was introduced by changeset d102cac809.

We need to test before using it.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 14:38:06 -03:00
Olli Salonen
6832d11edd [media] cxusb: Add support for TechnoTrend TT-connect CT2-4650 CI
TechnoTrend TT-connect CT2-4650 CI (0b48:3012) is an USB DVB-T2/C tuner with
the following components:

 USB interface: Cypress CY7C68013A-56LTXC
 Demodulator: Silicon Labs Si2168-A20
 Tuner: Silicon Labs Si2158-A20
 CI chip: CIMaX SP2HF

The firmware for the tuner is the same as for TechnoTrend TT-TVStick CT2-4400.
See https://www.mail-archive.com/linux-media@vger.kernel.org/msg76944.html

The demodulator needs a firmware that can be extracted from the Windows drivers.
File ttConnect4650_64.sys should be extracted from
http://www.tt-downloads.de/bda-treiber_4.1.0.4.zip (MD5 sum below).

3464bfc37a47b4032568718bacba23fb  ttConnect4650_64.sys

Then the firmware can be extracted:
dd if=ttConnect4650_64.sys ibs=1 skip=273376 count=6424 of=dvb-demod-si2168-a20-01.fw

The SP2 CI module requires a definition of a function cxusb_tt_ct2_4650_ci_ctrl
that is passed on to the SP2 driver and called back for CAM operations.

[crope@iki.fi: meld USB ID define patch to this]
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-02 15:12:38 -03:00
Changbing Xiong
d102cac809 [media] media: check status of dmxdev->exit in poll functions of demux&dvr
when usb-type tuner is pulled out, user applications did not close device's FD,
and go on polling the device, we should return POLLERR directly.

Signed-off-by: Changbing Xiong <cb.xiong@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-02 11:50:42 -03:00
Changbing Xiong
236c9bfa4a [media] media: correct return value in dvb_demux_poll
Data type of return value is unsigned int, but in function of dvb_demux_poll,
when the pointer of dmxdevfilter equals NULL, it will return -EINVAL, which
is invalid.

Signed-off-by: Changbing Xiong <cb.xiong@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-02 11:49:00 -03:00
Mauro Carvalho Chehab
c623ed6316 [media] dvb_frontend: estimate bandwidth also for DVB-S/S2/Turbo
The needed bandwidth can be estimated using the symbol rate and
the rolloff factor. This could be useful for the frontend drivers,
as they don't need to calculate it themselves.

Reported-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-26 18:52:04 -03:00
Mauro Carvalho Chehab
59d7889ae4 [media] dvb-frontend: add core support for tuner suspend/resume
While several tuners have some sort of suspend/resume
implementation, this is currently mangled with an optional
.sleep callback that it is also used to put the device on
low power mode.

Not all drivers implement it, as returning the driver from
low power may require to re-load the firmware, with takes
some time. Also, some drivers may delay it.

So, the more coherent is to add two new optional callbacks
that will let the tuners to directy implement suspend and
resume callbacks if they need.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 15:25:09 -05:00
Linus Torvalds
ae045e2455 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...
2014-08-06 09:38:14 -07:00
Shuah Khan
87cd0fa811 [media] media: dvb-core add new flag exit flag value for resume
Some fe drivers will have to do additional initialization
in their fe ops.init interfaces when called during resume.
Without the additional initialization, fe and tuner driver
resume fails. A new fe exit flag value DVB_FE_DEVICE_RESUME
is necessary to detect resume case. This patch adds a new
define and changes dvb_frontend_resume() to set it prior to
calling fe init and tuner init calls and resets it back to
DVB_FE_NO_EXIT once fe and tuner init is done.

Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 11:20:10 -03:00
Shuah Khan
18ed2860cb [media] media: dvb-core move fe exit flag from fepriv to fe for driver access
Some fe drivers attempt to access the device for power control from
their release routines. When release routines are called after device
is disconnected, the attempts fail. fe drivers should avoid accessing
the device, from their release interfaces when called from disconnect
path. dvb-frontend maintains exit flag to keep track when fe device is
disconnected in its private data structures. Export the flag in fe to
enable drivers to check the device status from their release interfaces.

Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 11:17:15 -03:00
Sebastian
89c5ff0557 [media] rtl28xxu: add [1b80:d3b0] Sveon STV21
Added Sveon STV21 device based on Realtek RTL2832U and FC0013 tuner

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 10:52:28 -03:00
Tom Gundersen
c835a67733 net: set name_assign_type in alloc_netdev()
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert
all users to pass NET_NAME_UNKNOWN.

Coccinelle patch:

@@
expression sizeof_priv, name, setup, txqs, rxqs, count;
@@

(
-alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs)
+alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs)
|
-alloc_netdev_mq(sizeof_priv, name, setup, count)
+alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count)
|
-alloc_netdev(sizeof_priv, name, setup)
+alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup)
)

v9: move comments here from the wrong commit

Signed-off-by: Tom Gundersen <teg@jklm.no>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 16:12:48 -07:00
Olli Salonen
26c42b0dd5 [media] cxusb: TechnoTrend CT2-4400 USB DVB-T2/C tuner support
USB ID 0b48:3014.

USB interface: Cypress CY7C68013A-56LTXC
Demodulator: Silicon Labs Si2168-30
Tuner: Silicon Labs Si2158-20

Cc: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14 21:07:07 -03:00
Mauro Carvalho Chehab
4647f48708 [media] dvbdev: add a dvb_detach() macro
The dvb_attach() was unbalanced, as there was no dvb_dettach. Ok,
on current cases, the dettach is done by dvbdev, but that are some
future corner cases where we may need to do this before registering
the frontend.

So, add a dvb_detach() and use it at dvb_frontend.c.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:47 -03:00
Manuel Schönlaub
44f83144ca [media] az6027: Added the PID for a new revision of the Elgato EyeTV Sat DVB-S Tuner
There is another clone of AZ6027. This patch adds the relevant PID.

Signed-off-by: Manuel Schönlaub <manuel.schoenlaub@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 15:49:35 -03:00
Alessandro Miceli
74a86272f0 [media] rtl28xxu: add [1b80:d3af] Sveon STV27
Added support for Sveon STV27 device (rtl2832u + FC0013 tuner)

Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13 20:25:47 -03:00
Alessandro Miceli
f27f5b0ee4 [media] rtl28xxu: add [1b80:d39d] Sveon STV20
Added Sveon STV20 device based on Realtek RTL2832U and FC0012 tuner

Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13 20:25:31 -03:00
Ole Ernst
0123f29caf [media] dvb_frontend: Fix possible read out of bounds
Check if index is within bounds _before_ accessing the value.

Signed-off-by: Ole Ernst <olebowle@gmx.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-12 10:21:09 -03:00
Mauro Carvalho Chehab
e6876692ca [media] dvb_frontend: better handle lna set errors
If an attempt to set LNA fails, restore the cache to LNA_AUTO,
in order to make it to reflect the current LNA status.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-04 14:19:34 -03:00
Till Dörges
a24bc323eb [media] rtl28xxu: add ID [0ccd:00b4] TerraTec NOXON DAB Stick (rev 3)
I've got the following DAB USB stick that also works fine with the
DVB_USB_RTL28XXU driver after I added its USB ID:
	Bus 001 Device 009: ID 0ccd:00b4 TerraTec Electronic GmbH

[crope@iki.fi: apply patch partly manually]
Signed-off-by: Till Dörges <till@doerges.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24 10:32:11 -03:00
Linus Torvalds
b399c46ea0 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4)
 - a new dvb frontend for ds2103 chipset (m88ds2103)
 - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf)
 - new drivers for R-Car VSP1
 - a new radio driver: radio-raremono
 - a new tuner driver for ts2022 chipset (m88ts2022)
 - the analog part of em28xx is now a separate module that only
   load/runs if the device is not a pure digital TV device
 - added a staging driver for bcm2048 radio devices
 - the omap 2 video driver (omap24xx) was moved to staging.  This driver
   is for an old hardware and uses a deprecated Kernel internal API.  If
   nobody cares enough to fix it, it would be removed on a couple Kernel
   releases
 - the sn9c102 driver was moved to staging.  This driver was replaced by
   gspca, and disabled on some distros, as almost all devices are known
   to work properly with gspca.  It should be removed from kernel on a
   couple Kernel releases
 - lots of driver fixes, improvements and cleanups

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits)
  [media] media: v4l2-dev: fix video device index assignment
  [media] rc-core: reuse device numbers
  [media] em28xx-cards: properly initialize the device bitmap
  [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
  [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c
  [media] Staging: media: Fix quoted string split across line in as102_fe.c
  [media] media: st-rc: Add reset support
  [media] m2m-deinterlace: fix allocated struct type
  [media] radio-usb-si4713: fix sparse non static symbol warnings
  [media] em28xx-audio: remove needless check before usb_free_coherent()
  [media] au0828: Fix sparse non static symbol warning
  Revert "[media] go7007-usb: only use go->dev after allocated"
  [media] em28xx-audio: provide an error code when URB submit fails
  [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting
  [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0
  [media] em28xx: make 'em28xx_ctrl_ops' static
  em28xx-alsa: Fix error patch for init/fini
  [media] em28xx-audio: flush work at .fini
  [media] drxk: remove the option to load firmware asynchronously
  [media] em28xx: adjust period size at runtime
  ...
2014-01-31 09:31:14 -08:00
dingtianhong
5e231c2c5a media: dvb_core: slight optimization of addr compare
Use possibly more efficient ether_addr_equal
instead of memcmp.

Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26 13:31:34 -05:00
Robert Backhaus
d22d32e117 [media] Add USB IDs for Winfast DTV Dongle Mini-D
GIT_AUTHOR_DATE=1386943312
    Add USB IDs for the WinFast DTV Dongle Mini.
    Device is tested and works fine under MythTV

    Signed-off-by: Robert Backhaus <robbak@robbak.com>

Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-19 09:26:15 -02:00
Malcolm Priestley
17f335c304 [media] it913x: Add support for Avermedia H335 id 0x0335
Trivial USB ID addition for Avermedia H335.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-18 10:27:53 -02:00
Mauro Carvalho Chehab
675722b0e3 Merge branch 'upstream-fixes' into patchwork
Merge the media fixes merged upstream for v3.13-rc4

* upstream-fixes: (30 commits)
  [media] videobuf2-dma-sg: fix possible memory leak
  [media] vb2: regression fix: always set length field.
  [media] mt9p031: Include linux/of.h header
  [media] rtl2830: add parent for I2C adapter
  [media] media: marvell-ccic: use devm to release clk
  [media] ths7303: Declare as static a private function
  [media] em28xx-video: Swap release order to avoid lock nesting
  [media] usbtv: Add support for PAL video source
  [media] media_tree: Fix spelling errors
  [media] videobuf2: Add support for file access mode flags for DMABUF exporting
  [media] radio-shark2: Mark shark_resume_leds() inline to kill compiler warning
  [media] radio-shark: Mark shark_resume_leds() inline to kill compiler warning
  [media] af9035: unlock on error in af9035_i2c_master_xfer()
  [media] af9033: fix broken I2C
  [media] v4l: omap3isp: Don't check for missing get_fmt op on remote subdev
  [media] af9035: fix broken I2C and USB I/O
  [media] wm8775: fix broken audio routing
  [media] marvell-ccic: drop resource free in driver remove
  [media] tef6862/radio-tea5764: actually assign clamp result
  [media] cx231xx: use after free on error path in probe
  ...
2013-12-13 05:04:00 -02:00
Roland Scheidegger
431cb35018 [media] az6007: support Technisat Cablestar Combo HDCI (minus remote)
This is similar to the Terratec H7. It works with the same az6007 firmware as
the former, however the drx-k firmware of the H7 will NOT work. Hence use
a different firmware name. The firmware does not need to exist as the one in
the eeprom is just fine as long as the h7 one doesn't get loaded, but maybe
some day someone wants to load it (the one from the h5 would work too).
Also since the config entry is now different anyway disable support for rc.
AFAIK the Technisat remote (TS35) is RC5 and the code (which a code comment
claims doesn't work anyway) only would handle NEC hence it's pointless creating
a device and polling it if we already know it can't work.
CI is untested.

Originally based on idea found on
http://www.linuxtv.org/wiki/index.php/TechniSat_CableStar_Combo_HD_CI claiming
only id needs to be added (but failed to mention it only worked because the
driver couldn't find the h7 drx-k firmware...).

Signed-off-by: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10 07:15:54 -02:00
Jonathan McCrohan
f58c91ce82 [media] media_tree: Fix spelling errors
Fix various spelling errors in strings and comments throughout the media
tree. The majority of these were found using Lucas De Marchi's codespell
tool.

[m.chehab@samsung.com: discard hunks with conflicts]

Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-09 14:50:50 -02:00
Jonathan McCrohan
39c1cb2b19 [media] media_tree: Fix spelling errors
Fix various spelling errors in strings and comments throughout the media
tree. The majority of these were found using Lucas De Marchi's codespell
tool.

[m.chehab@samsung.com: discard hunks with conflicts]

Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29 14:43:50 -02:00
Michael Krufky
340f70e911 [media] dvb_demux: clean up whitespace in comments from previous patch (trivial)
removes trailing whitespace and rebalance line length in comment block

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29 12:18:45 -02:00
Alexey Khoroshilov
6633327d59 [media] dvb_demux: fix deadlock in dmx_section_feed_release_filter()
dmx_section_feed_release_filter() locks dvbdmx->mutex and
if the feed is still filtering, it calls feed->stop_filtering(feed).
stop_filtering() is implemented by dmx_section_feed_stop_filtering()
that first of all try to lock the same mutex: dvbdmx->mutex.
That leads to a deadlock.
It does not happen often in practice because all callers of
release_filter() stop filtering by themselves.
So the problem can happen in case of race condition only.
The patch releases dvbdmx->mutex before call to feed->stop_filtering(feed)
and reacquires the mutex after that.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29 12:18:25 -02:00
Linus Torvalds
a310410f61 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 "This series include:
   - a new Remote Controller driver for ST SoC with the corresponding DT
     bindings
   - a new frontend (cx24117)
   - a new I2C camera flash driver (lm3560)
   - a new mem2mem driver for TI SoC (ti-vpe)
   - support for Raphael r828d added to r820t driver
   - some improvements on buffer allocation at VB2 core
   - usual driver fixes and improvements

  PS this time, we have a smaller number of patches.  While it is hard
  to pinpoint to the reasons, I believe that it is mainly due to:

   1) there are several patch series ready, but depending on DT review.
      I decided to grant some extra time for DT maintainers to look on
      it, as they're expecting to have more time with the changes agreed
      during ARM mini-summit and KS.  If they can't review in time for
      3.14, I'll review myself and apply for the next merge window.

   2) I suspect that having both LinuxCon EU and LinuxCon NA happening
      during the same merge window affected the development
      productivity, as several core media developers participated on
      both events"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (151 commits)
  [media] media: st-rc: Add ST remote control driver
  [media] gpio-ir-recv: Include linux/of.h header
  [media] tvp7002: Include linux/of.h header
  [media] tvp514x: Include linux/of.h header
  [media] ths8200: Include linux/of.h header
  [media] adv7343: Include linux/of.h header
  [media] v4l: Fix typo in v4l2_subdev_get_try_crop()
  [media] media: i2c: add driver for dual LED Flash, lm3560
  [media] rtl28xxu: add 15f4:0131 Astrometa DVB-T2
  [media] rtl28xxu: add RTL2832P + R828D support
  [media] rtl2832: add new tuner R828D
  [media] r820t: add support for R828D
  [media] media/i2c: ths8200: fix build failure with gcc 4.5.4
  [media] Add support for KWorld UB435-Q V2
  [media] staging/media: fix msi3101 build errors
  [media] ddbridge: Remove casting the return value which is a void pointer
  [media] ngene: Remove casting the return value which is a void pointer
  [media] dm1105: remove unneeded not-null test
  [media] sh_mobile_ceu_camera: remove deprecated IRQF_DISABLED
  [media] media: rcar_vin: Add preliminary r8a7790 support
  ...
2013-11-18 15:08:02 -08:00
Al Viro
79b185dd1a dmxdev: get rid of pointless clearing ->f_op
nobody else will see that struct file after return from ->release()
anyway; just leave ->f_op as is and let __fput() do that fops_put().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:53 -04:00
Al Viro
e84f9e57b9 consolidate the reassignments of ->f_op in ->open() instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:53 -04:00
Ming Lei
503f2de78d [media] media: dvb-core: prepare for enabling irq in complete()
Complete() will be run with interrupt enabled, so change to
spin_lock_irqsave().
These functions may be called inside URB->complete(), so use
spin_lock_irqsave().

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-02 06:48:13 -03:00
Michael Krufky
c859e6ef33 [media] dib0700: add support for PCTV 2002e & PCTV 2002e SE
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-22 07:48:11 -03:00
Soeren Moch
414abbd2cd [media] media: dmxdev: remove dvb_ringbuffer_flush() on writer side
In dvb_ringbuffer lock-less synchronizationof reader and writer threads is done
with separateread and write pointers. Sincedvb_ringbuffer_flush() modifies the
read pointer, this function must not be called from the writer thread.
This patch removes the dvb_ringbuffer_flush() calls in the dmxdev ringbuffer
write functions, this fixes Oopses "Unable to handle kernel paging request"
I could observe for the call chaindvb_demux_read ->dvb_dmxdev_buffer_read ->
dvb_ringbuffer_read_user -> __copy_to_user (the reader side of the ringbuffer).
The flush calls at the write side are not necessary anyway since ringbuffer_flush
is also called in dvb_dmxdev_buffer_read() when an error condition is set in the
ringbuffer.
This patch should also be applied to stable kernels.

Signed-off-by: Soeren Moch <smoch@web.de>
CC: <stable@vger.kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-19 11:48:09 -03:00
Alessandro Miceli
c6be75264b [media] Add support for Crypto Redi PC50A device (rtl2832u + FC0012 tuner)
The device has been tested on a MIPSel box with kernel 3.1.1 and backported media_tree drivers
The kernel detects the device with the following output:
usbcore: registered new interface driver dvb_usb_rtl28xxu
usb 1-2: dvb_usb_v2: found a 'Crypto Redi PC50A' in warm state
usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Crypto Redi PC50A)
usb 1-2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
i2c i2c-4: fc0012: Fitipower FC0012 successfully identified
usb 1-2: dvb_usb_v2: 'Crypto Redi PC50A' successfully initialized and connected

[crope@iki.fi: fix trivial merge conflict]
Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-08 21:59:59 -03:00
Alessandro Miceli
a7fab85111 [media] Add support for 'Digital Dual TV Receiver CTVDIGDUAL v2
Tested on a MIPSel box with 3.3.6 kernel
The kernel output when the device will be detected follows:
usbcore: registered new interface driver dvb_usb_it913x
it913x: Chip Version=01 Chip Type=9135
it913x: Remote propriety (raw) mode
it913x: Dual mode=3 Tuner Type=38
it913x: Chip Version=01 Chip Type=9135
usb 2-1: dvb_usb_v2: found a 'Digital Dual TV Receiver CTVDIGDUAL_V2' in cold state
usb 2-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9137-01.fw'
it913x: FRM Starting Firmware Download
it913x: FRM Firmware Download Completed - Resetting Device
it913x: Chip Version=01 Chip Type=9135
it913x: Firmware Version 204147968
usb 2-1: dvb_usb_v2: found a 'Digital Dual TV Receiver CTVDIGDUAL_V2' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Digital Dual TV Receiver CTVDIGDUAL_V2)
it913x-fe: ADF table value      :00
it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 00
it913x-fe: Tuner LNA type :38
usb 2-1: DVB: registering adapter 1 frontend 0 (Digital Dual TV Receiver CTVDIGDUAL_V2_1)...
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Digital Dual TV Receiver CTVDIGDUAL_V2)
it913x-fe: ADF table value      :00
it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 00
it913x-fe: Tuner LNA type :38
usb 2-1: DVB: registering adapter 2 frontend 0 (Digital Dual TV Receiver CTVDIGDUAL_V2_2)...
usb 2-1: dvb_usb_v2: 'Digital Dual TV Receiver CTVDIGDUAL_V2' successfully initialized and connected
RC part not tested

Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-08 20:19:46 -03:00
Linus Torvalds
20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
Linus Torvalds
73287a43cc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...
2013-05-01 14:08:52 -07:00
Al Viro
03feee373f dvb_frontend: don't mess with ->f_op in ->release()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-29 15:41:47 -04:00