The message erroneously told that the pad wasn't found from a tuner
when in reality it wasn't found from a decoder.
Signed-off-by: Antti Keränen <detegr@rbx.email>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When building with CONFIG_OF not set, the following clang
build warning is seen:
>> drivers/staging/media/rkvdec/rkvdec.c:967:34: warning: unused variable 'of_rkvdec_match' [-Wunused-const-variable]
Fix the warning by removing the unnecessary of_match_ptr().
Reported-by: kernel test robot <lkp@intel.com>
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The adv7604 refused to accept an one-block EDID, it required two blocks.
Fix this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
:c:type:`struct v4l2_requestbuffers` should be
struct :c:type:`v4l2_requestbuffers`.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The VIDIOC_G/S/TRY_EXT_CTRLS documentation has large explanatory texts for
some of the fields in a table. This makes it hard to read. Move those text
to a new cell spanning the whole width of the table, similar to what was
done for struct v4l2_pix_format. This makes it much more readable.
Also move the 'ctrl_class' description to below the 'which' description and
just mention that it is deprecated and that 'which' should be used instead.
Finally remove 'note::' for the V4L2_CTRL_WHICH_DEF_VAL description. It
doesn't have to be marked as a note, it's just a simple paragraph.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When defining variables and assigning values can be done at the same time.
Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The coda driver only runs on i.MX, which is a DT-only platform, so
remove the unneeded of_match_ptr().
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Exit as soon as possible if a driver wants to allocate a buffer of
size 0, and print a warning to help fixing the issue.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a name of the menu and fill control type.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The version here is identical to the one in the I2C core, so use the
latter version directly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A top-level documentation block was missing 'DOC:'.
Fix typos in vpu_wdt_reg_handler() and vpu_mapping_dm_addr().
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Irui Wang <irui.wang@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
mtk_vcodec_drv.h:
It's '@var:', not '@var - '.
In two places 'struct' was used instead of 'enum'.
vdec_drv_if.h:
It's '@var:', not '@var :'.
In one place 'struct' was used instead of 'enum'.
venc_ipi_msg.h:
It's '@data:', not '@data[8]:', i.e. arrays do not include the
size in kernel-doc.
It's '@var:', not 'var:'.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Alexandre Courbot <acourbot@chromium.org>
Cc: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
mtk_mdp_comp.h: MTK_MDP_COMP_TYPE_MAX was undocumented, but it
is also unused, so just remove it.
mtk_mdp_core.h: add missing '*' inside comment blocks, add a
missing : after '@ctrls' and add a missing struct keyword.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Eizan Miyamoto <eizan@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add missing 'struct' keywords and fix typos in two struct member
names.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Xia Jiang <xia.jiang@mediatek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
One comment used /** instead of /*, so it caused kernel-doc
warnings. Just turn it into a regular comment.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Two structs where missing the kernel-doc 'struct' keyword
in their kernel-doc documentation.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- @h264_dec was not documented, add that trivial change
- it is not possible to document a global variable in kernel-doc,
change to use 'DOC:' instead
- fix mismatched struct name (hantro_vp8d_hw_ctx -> hantro_vp8_dec_hw_ctx)
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The kernel-doc documentation for two structs was missing the
'struct' keyword.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix formatting of two enums and one struct.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix inline struct member documentation, was missing the
'@memb:' prefix.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this kernel-doc warning:
drivers/staging/media/tegra-video/csi.h:152: warning: Function parameter or member 'csi_chans' not described in 'tegra_csi'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix the following kernel-doc warnings:
drivers/media/usb/dvb-usb-v2/dvb_usb.h:109: warning: cannot understand function prototype: 'struct dvb_usb_driver_info '
drivers/media/usb/dvb-usb-v2/dvb_usb.h:126: warning: cannot understand function prototype: 'struct dvb_usb_rc '
drivers/media/usb/dvb-usb-v2/dvb_usb.h:143: warning: cannot understand function prototype: 'struct usb_data_stream_properties '
drivers/media/usb/dvb-usb-v2/dvb_usb.h:170: warning: expecting prototype for properties of dvb usb device adapter(). Prototype was for
MAX_NO_OF_FE_PER_ADAP() instead
drivers/media/usb/dvb-usb-v2/dvb_usb.h:221: error: Cannot parse struct or union!
drivers/media/usb/dvb-usb-v2/dvb_usb.h:277: warning: expecting prototype for generic object of an usb stream(). Prototype was for
MAX_NO_URBS_FOR_DATA_STREAM() instead
drivers/media/usb/dvb-usb-v2/dvb_usb.h:319: warning: cannot understand function prototype: 'struct dvb_usb_adapter '
drivers/media/usb/dvb-usb-v2/dvb_usb.h:363: warning: cannot understand function prototype: 'struct dvb_usb_device '
drivers/media/usb/dvb-usb/dvb-usb.h:104: warning: cannot understand function prototype: 'struct usb_data_stream_properties '
drivers/media/usb/dvb-usb/dvb-usb.h:163: warning: expecting prototype for struct dvb_usb_adapter_properties. Prototype was for struct
dvb_usb_adapter_fe_properties instead
drivers/media/usb/dvb-usb/dvb-usb.h:205: warning: cannot understand function prototype: 'struct dvb_rc '
drivers/media/usb/dvb-usb/dvb-usb.h:227: warning: Enum value 'DVB_RC_LEGACY' not described in enum 'dvb_usb_mode'
drivers/media/usb/dvb-usb/dvb-usb.h:227: warning: Enum value 'DVB_RC_CORE' not described in enum 'dvb_usb_mode'
drivers/media/usb/dvb-usb/dvb-usb.h:271: error: Cannot parse struct or union!
drivers/media/usb/dvb-usb/dvb-usb.h:325: error: Cannot parse struct or union!
drivers/media/usb/dvb-usb/dvb-usb.h:385: warning: expecting prototype for struct dvb_usb_adapter. Prototype was for struct
dvb_usb_fe_adapter instead
drivers/media/usb/dvb-usb/dvb-usb.h:476: warning: Function parameter or member 'num_adapters_initialized' not described in 'dvb_usb_device'
drivers/media/usb/dvb-usb/dvb-usb.h:476: warning: Function parameter or member 'adapter' not described in 'dvb_usb_device'
drivers/media/usb/dvb-usb/dvb-usb.h:476: warning: Function parameter or member 'rc_phys' not described in 'dvb_usb_device'
drivers/media/usb/em28xx/em28xx.h:377: warning: cannot understand function prototype: 'enum em28xx_amux '
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This documentation has been incorporated in dtschema dt-bindings
for the devices supported by CAMSS and is no longer helpful.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Due to the complexity of describing multiple hardware generations
in one document, switch to using separate dt-bindings.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add bindings for qcom,sdm845-camss in order to support the camera
subsystem for SDM845.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add bindings for qcom,sdm660-camss in order to support the camera
subsystem on SDM630/660 and SDA variants.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add bindings for qcom,msm8996-camss in order to support the camera
subsystem on MSM8996.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add bindings for qcom,msm8916-camss in order to support the camera
subsystem on MSM8916.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Enable support for SDM845 based Titan 170 ISPs.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For Titan ISPs clocks fail to re-enable during vfe_get()
after any vfe has been halted and its corresponding power
domain power has been detached.
Since all of the clocks depend on all of the PDs, per
VFE PD detaching is no option for Gen2 HW.
In order to not have regressions on for Gen1 HW, refactor
the power domain management into hardware version specific
code paths.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add register definitions for version 170 of the Titan architecture
and implement support for the CSIPHY subdevice.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add register definitions for version 170 of the Titan architecture
and implement support for the CSID subdevice.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to support Qualcomm ISP hardware architectures that diverge
from older architectures, the CSID subdevice drivers needs to be refactored
to better abstract the different ISP hardware architectures.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CSI-2 spec defines format identifier for Data Type (DT),
and how the Decode Format (DF) & Encode Format (EF) are implemented.
The spec does however not define the DF, EF or Plain Format (PF)
identifiers, as those are vendor specific.
Plain formats describe the size of the pixels written by the RDI
units to memory. PLAIN8 for example has the size 8 bits, and
PLAIN32 32 bits. The appropriate Plain Format is determined by
the Decode Format used. The smallest Plain Format that is able
to contain a pixel of the used Decode Format is the appropriate
one to use.
As the vendor specific identifiers differ between hardware
generations, split them out into separate headers.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add register definitions for version 170 of the Titan architecture
and implement support for the RDI output mode.
The RDI mode as opposed to the PIX output mode for the VFE unit does
not support any ISP functionality. This means essentially only
supporting dumping the output of the whatever the CSI decoder receives
from the sensor.
For example will a sensor outputting YUV pixel format frames, only
allow the VFE to dump those frames as they are received by the ISP
to memory through the RDI interface.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to support Qualcomm ISP hardware architectures that diverge
from older architectures, the VFE subdevice driver needs to be refactored
to better abstract the different ISP architectures.
Gen1 represents the CAMSS ISP architecture. The ISP architecture developed
after CAMSS, Titan, will be referred to as Gen2.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver supports multiple architecture versions of the Qualcomm ISP.
The CAMSS architecure which this driver is name after, and with the
introduction of this series, the Titan architecture.
The ISPIF is an IP-block that is only present in the CAMSS generation of
the architecture. In order to support the Titan generation, make the
ISPIF an optional subdevice.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add enum representing the SDM845 SOC, which incorporates version
170 of the Titan architecture ISP.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
trace_printk() should not be used in production code,
since extra memory is used for special buffers whenever
trace_puts() is used.
Replace it with dev_dbg() which provides all of the desired
debugging functionality.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Suggested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Comment refers to ISPIF, but this is incorrect. Only
the VFE interrupts are handled by this function.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Function name in comment is wrong, and was changed to be
the same as the actual function name.
The comment was changed to kerneldoc format.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The imx3 camera driver has been removed a long time ago, so get
rid of this unused header file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The imx27/imx25 camera driver has been removed a long time ago,
so get rid of this unused header file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The _FRAME_SKIP_ enums were missing the _VIDEO prefix.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
