Some Clippy lints can be configured/tweaked. We will use these knobs to
our advantage in later commits.
This is done via a configuration file, `.clippy.toml` [1]. The file is
currently unstable. This may be a problem in the future, but we can adapt
as needed. In addition, we proposed adding Clippy to the Rust CI's RFL
job [2], so we should be able to catch issues pre-merge.
Thus introduce the file.
Link: https://doc.rust-lang.org/clippy/configuration.html [1]
Link: https://github.com/rust-lang/rust/pull/128928 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
- Support cross-compiling linux-headers Debian package and kernel-devel
RPM package
- Add support for the linux-debug Pacman package
- Improve module rebuilding speed by factoring out the common code to
scripts/module-common.c
- Separate device tree build rules into scripts/Makefile.dtbs
- Add a new script to generate modules.builtin.ranges, which is useful
for tracing tools to find symbols in built-in modules
- Refactor Kconfig and misc tools
- Update Kbuild and Kconfig documentation
-----BEGIN PGP SIGNATURE-----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=g4t/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support cross-compiling linux-headers Debian package and kernel-devel
RPM package
- Add support for the linux-debug Pacman package
- Improve module rebuilding speed by factoring out the common code to
scripts/module-common.c
- Separate device tree build rules into scripts/Makefile.dtbs
- Add a new script to generate modules.builtin.ranges, which is useful
for tracing tools to find symbols in built-in modules
- Refactor Kconfig and misc tools
- Update Kbuild and Kconfig documentation
* tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
kbuild: doc: replace "gcc" in external module description
kbuild: doc: describe the -C option precisely for external module builds
kbuild: doc: remove the description about shipped files
kbuild: doc: drop section numbering, use references in modules.rst
kbuild: doc: throw out the local table of contents in modules.rst
kbuild: doc: remove outdated description of the limitation on -I usage
kbuild: doc: remove description about grepping CONFIG options
kbuild: doc: update the description about Kbuild/Makefile split
kbuild: remove unnecessary export of RUST_LIB_SRC
kbuild: remove append operation on cmd_ld_ko_o
kconfig: cache expression values
kconfig: use hash table to reuse expressions
kconfig: refactor expr_eliminate_dups()
kconfig: add comments to expression transformations
kconfig: change some expr_*() functions to bool
scripts: move hash function from scripts/kconfig/ to scripts/include/
kallsyms: change overflow variable to bool type
kallsyms: squash output_address()
kbuild: add install target for modules.builtin.ranges
scripts: add verifier script for builtin module range data
...
Create file module.builtin.ranges that can be used to find where
built-in modules are located by their addresses. This will be useful for
tracing tools to find what functions are for various built-in modules.
The offset range data for builtin modules is generated using:
- modules.builtin: associates object files with module names
- vmlinux.map: provides load order of sections and offset of first member
per section
- vmlinux.o.map: provides offset of object file content per section
- .*.cmd: build cmd file with KBUILD_MODFILE
The generated data will look like:
.text 00000000-00000000 = _text
.text 0000baf0-0000cb10 amd_uncore
.text 0009bd10-0009c8e0 iosf_mbi
...
.text 00b9f080-00ba011a intel_skl_int3472_discrete
.text 00ba0120-00ba03c0 intel_skl_int3472_discrete intel_skl_int3472_tps68470
.text 00ba03c0-00ba08d6 intel_skl_int3472_tps68470
...
.data 00000000-00000000 = _sdata
.data 0000f020-0000f680 amd_uncore
For each ELF section, it lists the offset of the first symbol. This can
be used to determine the base address of the section at runtime.
Next, it lists (in strict ascending order) offset ranges in that section
that cover the symbols of one or more builtin modules. Multiple ranges
can apply to a single module, and ranges can be shared between modules.
The CONFIG_BUILTIN_MODULE_RANGES option controls whether offset range data
is generated for kernel modules that are built into the kernel image.
How it works:
1. The modules.builtin file is parsed to obtain a list of built-in
module names and their associated object names (the .ko file that
the module would be in if it were a loadable module, hereafter
referred to as <kmodfile>). This object name can be used to
identify objects in the kernel compile because any C or assembler
code that ends up into a built-in module will have the option
-DKBUILD_MODFILE=<kmodfile> present in its build command, and those
can be found in the .<obj>.cmd file in the kernel build tree.
If an object is part of multiple modules, they will all be listed
in the KBUILD_MODFILE option argument.
This allows us to conclusively determine whether an object in the
kernel build belong to any modules, and which.
2. The vmlinux.map is parsed next to determine the base address of each
top level section so that all addresses into the section can be
turned into offsets. This makes it possible to handle sections
getting loaded at different addresses at system boot.
We also determine an 'anchor' symbol at the beginning of each
section to make it possible to calculate the true base address of
a section at runtime (i.e. symbol address - symbol offset).
We collect start addresses of sections that are included in the top
level section. This is used when vmlinux is linked using vmlinux.o,
because in that case, we need to look at the vmlinux.o linker map to
know what object a symbol is found in.
And finally, we process each symbol that is listed in vmlinux.map
(or vmlinux.o.map) based on the following structure:
vmlinux linked from vmlinux.a:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
vmlinux linked from vmlinux.o:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
vmlinux.o -- need to use vmlinux.o.map
<symbol> -- ignored
...
vmlinux.o.map:
<section>
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
3. As sections, objects, and symbols are processed, offset ranges are
constructed in a straight-forward way:
- If the symbol belongs to one or more built-in modules:
- If we were working on the same module(s), extend the range
to include this object
- If we were working on another module(s), close that range,
and start the new one
- If the symbol does not belong to any built-in modules:
- If we were working on a module(s) range, close that range
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 5ce2176b81 ("genksyms: adjust the output format to modpost")
stopped generating *.symversions files.
Remove the left-over from the .gitignore file and the 'clean' rule.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Commit 3f1b0e1f28 (".gitignore update") added *.orig and *.rej
patterns to .gitignore in v2.6.23. The commit message didn't give a
rationale. Later on, commit 1f5d3a6b65 ("Remove *.rej pattern from
.gitignore") removed the *.rej pattern in v2.6.26, on the rationale that
*.rej files indicated something went really wrong and should not be
ignored.
The *.rej files are now shown by `git status`, which helps located
conflicts when applying patches and lowers the probability that they
will go unnoticed. It is however still easy to overlook the *.orig files
which slowly polute the source tree. That's not as big of a deal as not
noticing a conflict, but it's still not nice.
Drop the *.orig pattern from .gitignore to avoid this and help keep the
source tree clean.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[masahiroy@kernel.org:
I do not have a strong opinion about this. Perhaps some people may have
a different opinion.
If you are someone who wants to ignore *.orig, it is likely you would
want to do so across all projects. Then, $XDG_CONFIG_HOME/git/ignore
would be more suitable for your needs. gitignore(5) suggests, "Patterns
which a user wants Git to ignore in all situations generally go into a
file specified by core.excludesFile in the user's ~/.gitconfig".
Please note that you cannot do the opposite; if *.orig is ignored by
the project's .gitignore, you cannot override the decision because
$XDG_CONFIG_HOME/git/ignore has a lower priority.
If *.orig is sitting on the fence, I'd leave it to the users. ]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These files contain the runtime coverage data generated by gcov.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pacman is the package manager used by Arch Linux and its derivates.
Creating native packages from the kernel tree has multiple advantages:
* The package triggers the correct hooks for initramfs generation and
bootloader configuration
* Uninstallation is complete and also invokes the relevant hooks
* New UAPI headers can be installed without any manual bookkeeping
The PKGBUILD file is a modified version of the one used for the
downstream Arch Linux "linux" package.
Extra steps that should not be necessary for a development kernel have
been removed and an UAPI header package has been added.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It is useful to have a list of all *.dtb and *.dtbo files generated
from the current build.
With this commit, 'make dtbs' creates arch/*/boot/dts/dtbs-list, which
lists the dtb(o) files created in the current build. It maintains the
order of the dtb-y additions in Makefiles although the order is not
important for DTBs. It is a (good) side effect through the reuse of the
modules.order rule.
Please note this list only includes the files directly added to dtb-y.
For example, consider this case:
foo-dtbs := foo_base.dtb foo_overlay.dtbo
dtb-y := foo.dtb
In this example, the list will include foo.dtb, but not foo_base.dtb
or foo_overlay.dtbo.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
EditorConfig is a specification to define the most basic code formatting
stuff, and it's supported by many editors and IDEs, either directly or
via plugins, including VSCode/VSCodium, Vim, emacs and more.
It allows to define formatting style related to indentation, charset,
end of lines and trailing whitespaces. It also allows to apply different
formats for different files based on wildcards, so for example it is
possible to apply different configs to *.{c,h}, *.py and *.rs.
In linux project, defining a .editorconfig might help to those people
that work on different projects with different indentation styles, so
they cannot define a global style. Now they will directly see the
correct indentation on every fresh clone of the project.
See https://editorconfig.org
Co-developed-by: Danny Lin <danny@kdrag0n.dev>
Signed-off-by: Danny Lin <danny@kdrag0n.dev>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Tested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
kernel.spec is the last piece that resides outside the rpmbuild/
directory. Move all the RPM-related files to rpmbuild/ consistently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Now kernel.spec and binkernel.spec have the exactly same contents.
Use kernel.spec for binrpm-pkg as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit 534066a983.
It's actively detrimental in that it hides files that shouldn't be
hidden.
If I have some b4 mbx file in my git directory, it either was already
applied with "git am" and is now stale, or maybe it's waiting for that
to happen. In neither case is "ignore it" the right option.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_TRIM_UNUSED_KSYMS is enabled, Kbuild recursively traverses
the directory tree to determine which EXPORT_SYMBOL to trim. If an
EXPORT_SYMBOL turns out to be unused by anyone, Kbuild begins the
second traverse, where some source files are recompiled with their
EXPORT_SYMBOL() tuned into a no-op.
Linus stated negative opinions about this slowness in commits:
- 5cf0fd591f ("Kbuild: disable TRIM_UNUSED_KSYMS option")
- a555bdd0c5 ("Kbuild: enable TRIM_UNUSED_KSYMS again, with some guarding")
We can do this better now. The final data structures of EXPORT_SYMBOL
are generated by the modpost stage, so modpost can selectively emit
KSYMTAB entries that are really used by modules.
Commit f73edc8951 ("kbuild: unify two modpost invocations") is another
ground-work to do this in a one-pass algorithm. With the list of modules,
modpost sets sym->used if it is used by a module. modpost emits KSYMTAB
only for symbols with sym->used==true.
BTW, Nicolas explained why the trimming was implemented with recursion:
https://lore.kernel.org/all/2o2rpn97-79nq-p7s2-nq5-8p83391473r@syhkavp.arg/
Actually, we never achieved that level of optimization where the chain
reaction of trimming comes into play because:
- CONFIG_LTO_CLANG cannot remove any unused symbols
- CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is enabled only for vmlinux,
but not modules
If deeper trimming is required, we need to revisit this, but I guess
that is unlikely to happen.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This KUnit update Linux 6.4-rc1 consists of:
- several fixes to kunit tool
- new klist structure test
- support for m68k under QEMU
- support for overriding the QEMU serial port
- support for SH under QEMU
-----BEGIN PGP SIGNATURE-----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=COQn
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- several fixes to kunit tool
- new klist structure test
- support for m68k under QEMU
- support for overriding the QEMU serial port
- support for SH under QEMU
* tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: add tests for using current KUnit test field
kunit: tool: Add support for SH under QEMU
kunit: tool: Add support for overriding the QEMU serial port
.gitignore: Unignore .kunitconfig
list: test: Test the klist structure
kunit: increase KUNIT_LOG_SIZE to 2048 bytes
kunit: Use gfp in kunit_alloc_resource() kernel-doc
kunit: tool: fix pre-existing `mypy --strict` errors and update run_checks.py
kunit: tool: remove unused imports and variables
kunit: tool: add subscripts for type annotations where appropriate
kunit: fix bug of extra newline characters in debugfs logs
kunit: fix bug in the order of lines in debugfs logs
kunit: fix bug in debugfs logs of parameterized tests
kunit: tool: Add support for m68k under QEMU
There are almost dozen of .kunitconfig files that are ignored but
tracked. Unignore them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Prepare to add more files to the source RPM.
Also, fix the build error when KCONFIG_CONFIG is set:
error: Bad file: ./.config: No such file or directory
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'b4' command creates a *.mbx file, and also a *.cover file if the
patch set has a cover-letter. Ignore them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Recent git versions do not accept the noted command.
$ git ls-files -i --exclude-standard
fatal: ls-files -i must be used with either -o or -c
The -c was implied before, but we need to make it explicit since
git commit b338e9f66873 ("ls-files: error out on -i unless -o or -c
are specified").
Also, replace --exclude-standard with --exclude-per-directory=.gitignore
so that everyone will get consistent results.
git-ls-files(1) says:
--exclude-standard
Add the standard Git exclusions: .git/info/exclude, .gitignore in
each directory, and the user's global exclusion file.
We cannot predict what is locally added to .git/info/exclude or the
user's global exclusion file.
We can only manage .gitignore files committed to the repository.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit 8818039f95 ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
%.dtbo.o and %.dtbo.S files are used to build-in DT Overlay. They should
should not be removed by Make or the kernel will be needlessly rebuilt.
These should be removed by "clean" and ignored by git like other
intermediate files.
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Fixes: 941214a512 ("kbuild: Allow DTB overlays to built into .dtbo.S files")
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20221114205939.27994-1-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Having most of the new files in place, we now enable Rust support
in the build system, including `Kconfig` entries related to Rust,
the Rust configuration printer and a few other bits.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Douglas Su <d0u9.su@outlook.com>
Signed-off-by: Douglas Su <d0u9.su@outlook.com>
Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl>
Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl>
Co-developed-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Co-developed-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Co-developed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is the configuration file for the `rustfmt` tool.
`rustfmt` is a tool for formatting Rust code according to style guidelines.
It is very commonly used across Rust projects.
The default configuration options are used.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `generate_rust_analyzer.py` script generates the configuration
file (`rust-project.json`) for rust-analyzer.
rust-analyzer is a modular compiler frontend for the Rust language.
It provides an LSP server which can be used in editors such as
VS Code, Emacs or Vim.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The *.mod files have two lines; the first line lists the member objects
of the module, and the second line, if CONFIG_TRIM_UNUSED_KSYMS=y, lists
the undefined symbols.
Currently, we generate *.mod after constructing composite modules,
otherwise, we cannot compute the second line. No prerequisite is
required to print the first line.
They are orthogonal. Splitting them into separate commands will ease
further cleanups.
This commit splits the list of undefined symbols out to *.usyms files.
Previously, the list of undefined symbols ended up with a very long
line, but now it has one symbol per line.
Use sed like we did before commit 7d32358be8 ("kbuild: avoid split
lines in .mod files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
modules.builtin used to be created in every directory.
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), modules.builtin is created only
in the top directory.
Add the '/' prefix so that it matches to only the modules.builtin located
in the top directory.
It has been more than one year since that change. I hope this will not
flood 'Untracked files' of 'git status'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For consistency, move tags and TAGS close to the cscope and GNU Global
patterns.
I removed the '/' prefix in case somebody wants to manually create tag
files in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The external module build shows the following warning if Module.symvers
is missing in the kernel tree.
WARNING: Symbol version dump "Module.symvers" is missing.
Modules may not have dependencies or modversions.
I think this is an important heads-up because the resulting modules may
not work as expected. This happens when you did not build the entire
kernel tree, for example, you might have prepared the minimal setups
for external modules by 'make defconfig && make modules_preapre'.
A problem is that 'make modules' creates Module.symvers even without
vmlinux. In this case, that warning is suppressed since Module.symvers
already exists in spite of its incomplete content.
The incomplete (i.e. invalid) Module.symvers should not be created.
This commit changes the second pass of modpost to dump symbols into
modules-only.symvers. The final Module.symvers is created by
concatenating vmlinux.symvers and modules-only.symvers if both exist.
Module.symvers is supposed to collect symbols from both vmlinux and
modules. It might be a bit confusing, and I am not quite sure if it
is an official interface, but presumably it is difficult to rename it
because some tools (e.g. kmod) parse it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It can be quite useful to have ld emit a link map file, in order to
debug or verify that special sections end up where they are supposed
to, and to see what LD_DEAD_CODE_DATA_ELIMINATION manages to get rid
of.
The only reason I'm not just adding this unconditionally is that the
.map file can be rather large (several MB), and that's a waste of
space when one isn't interested in these things. Also make it depend
on CONFIG_EXPERT.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)
-----BEGIN PGP SIGNATURE-----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=6peY
-----END PGP SIGNATURE-----
Merge tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit dc5723b02e
("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
build:
make LLVM=1 LLVM_IAS=1 defconfig
scripts/config -e LTO_CLANG_THIN
make LLVM=1 LLVM_IAS=1
(To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
and "ARCH=arm64" to the "make" command lines.)
Summary:
- Clang LTO build infrastructure and arm64-specific enablement (Sami
Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"
* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
arm64: allow LTO to be selected
arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
arm64: vdso: disable LTO
drivers/misc/lkdtm: disable LTO for rodata.o
efi/libstub: disable LTO
scripts/mod: disable LTO for empty.c
modpost: lto: strip .lto from module names
PCI: Fix PREL32 relocations for LTO
init: lto: fix PREL32 relocations
init: lto: ensure initcall ordering
kbuild: lto: add a default list of used symbols
kbuild: lto: merge module sections
kbuild: lto: limit inlining
kbuild: lto: fix module versioning
kbuild: add support for Clang LTO
tracing: move function tracer options to Kconfig
Add support for building DT overlays (%.dtbo). The overlay's source file
will have the usual extension, i.e. .dts, though the blob will have
.dtbo extension to distinguish it from normal blobs.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/434ba2467dd0cd011565625aeb3450650afe0aae.1611904394.git.viresh.kumar@linaro.org
With CONFIG_MODVERSIONS, version information is linked into each
compilation unit that exports symbols. With LTO, we cannot use this
method as all C code is compiled into LLVM bitcode instead. This
change collects symbol versions into .symversions files and merges
them in link-vmlinux.sh where they are all linked into vmlinux.o at
the same time.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-4-samitolvanen@google.com
The default way of building documentation is to use
Sphinx toolchain installed via pip, inside the
Kernel tree main directory. That's what's recommended by:
scripts/sphinx-pre-install
As it usually provides a better version of this package
than the one installed, specially on LTS distros.
So, add the directories created by running the commands
suggested by the script.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ac4e23d556c7d95cb11d6d5c605f43e425b2c3c7.1599660067.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
For now, that's arch/x86/boot/compressed/vmlinux.bin.zst but probably more
will come, thus let's be consistent with all other compressors.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-8-nickrterrell@gmail.com
Running `make savedefconfig` creates by default `defconfig`, which is,
currently, on git’s radar, for example, `git status` lists this file as
untracked.
So, add the file to `.gitignore`, so it’s ignored by git.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The full build runs modpost twice, first for vmlinux.o and second for
modules.
The first pass dumps all the vmlinux symbols into Module.symvers, but
the second pass parses vmlinux again instead of reusing the dump file,
presumably because it needs to avoid accumulating stale symbols.
Loading symbol info from a dump file is faster than parsing an ELF object.
Besides, modpost deals with various issues to parse vmlinux in the second
pass.
A solution is to make the first pass dumps symbols into a separate file,
vmlinux.symvers. The second pass reads it, and parses module .o files.
The merged symbol information is dumped into Module.symvers in the same
way as before.
This makes further modpost cleanups possible.
Also, it fixes the problem of 'make vmlinux', which previously overwrote
Module.symvers, throwing away module symbols.
I slightly touched scripts/link-vmlinux.sh so that vmlinux is re-linked
when you cross this commit. Otherwise, vmlinux.symvers would not be
generated.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The modpost, with the -d option given, generates per-module .ns_deps
files.
Kbuild generates per-module .mod files to carry module information.
This is convenient because Make handles multiple jobs in parallel
when the -j option is given.
On the other hand, the modpost always runs as a single thread.
I do not see a strong reason to produce separate .ns_deps files.
This commit changes the modpost to generate just one file,
modules.nsdeps, each line of which has the following format:
<module_name>: <list of missing namespaces>
Please note it contains *missing* namespaces instead of required ones.
So, modules.nsdeps is empty if the namespace dependency is all good.
This will work more efficiently because spatch will no longer process
already imported namespaces. I removed the '(if needed)' from the
nsdeps log since spatch is invoked only when needed.
This also solves the stale .ns_deps problem reported by Jessica Yu:
https://lkml.org/lkml/2019/10/28/467
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
Summary of modules changes for the 5.4 merge window:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing kernel
developers to better manage the export surface, allow subsystem
maintainers to explicitly state that usage of some exported symbols
should only be limited to certain users (think: inter-module or
inter-driver symbols, debugging symbols, etc), as well as more easily
limiting the availability of namespaced symbols to other parts of the
kernel. With the module import requirement, it is also easier to spot
the misuse of exported symbols during patch review. Two new macros are
introduced: EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL(). The API is
thoroughly documented in Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there.
-----BEGIN PGP SIGNATURE-----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=72Uy
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"The main bulk of this pull request introduces a new exported symbol
namespaces feature. The number of exported symbols is increasingly
growing with each release (we're at about 31k exports as of 5.3-rc7)
and we currently have no way of visualizing how these symbols are
"clustered" or making sense of this huge export surface.
Namespacing exported symbols allows kernel developers to more
explicitly partition and categorize exported symbols, as well as more
easily limiting the availability of namespaced symbols to other parts
of the kernel. For starters, we have introduced the USB_STORAGE
namespace to demonstrate the API's usage. I have briefly summarized
the feature and its main motivations in the tag below.
Summary:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing
kernel developers to better manage the export surface, allow
subsystem maintainers to explicitly state that usage of some
exported symbols should only be limited to certain users (think:
inter-module or inter-driver symbols, debugging symbols, etc), as
well as more easily limiting the availability of namespaced symbols
to other parts of the kernel.
With the module import requirement, it is also easier to spot the
misuse of exported symbols during patch review.
Two new macros are introduced: EXPORT_SYMBOL_NS() and
EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in
Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there"
* tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Remove leftover '#undef' from export header
module: remove unneeded casts in cmp_name()
module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES
module: remove redundant 'depends on MODULES'
module: Fix link failure due to invalid relocation on namespace offset
usb-storage: export symbols in USB_STORAGE namespace
usb-storage: remove single-use define for debugging
docs: Add documentation for Symbol Namespaces
scripts: Coccinelle script for namespace dependencies.
modpost: add support for generating namespace dependencies
export: allow definition default namespaces in Makefiles or sources
module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
modpost: add support for symbol namespaces
module: add support for symbol namespaces.
export: explicitly align struct kernel_symbol
module: support reading multiple values per modinfo tag
This patch adds an option to modpost to generate a <module>.ns_deps file
per module, containing the namespace dependencies for that module.
E.g. if the linked module my-module.ko would depend on the symbol
myfunc.MY_NS in the namespace MY_NS, the my-module.ns_deps file created
by modpost would contain the entry MY_NS to express the namespace
dependency of my-module imposed by using the symbol myfunc.
These files can subsequently be used by static analysis tools (like
coccinelle scripts) to address issues with missing namespace imports. A
later patch of this series will introduce such a script 'nsdeps' and a
corresponding make target to automatically add missing
MODULE_IMPORT_NS() definitions to the module's sources. For that it uses
the information provided in the generated .ns_deps files.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The pattern '*.order' was added by commit c6025f4c8b ("kbuild: ignore
*.order files") to ignore modules.order files.
I do not see any other user of the '.order' extension.
Ignore 'modules.order' explicitly instead of '*.order'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This file is used by clangd to use language server protocol.
It can be generated at each compile using scripts/gen_compile_commands.py.
Therefore it is different depending on the environment and should be
ignored.
Signed-off-by: Toru Komatsu <k0ma@utam0k.jp>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.
To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.
Later, commit 551559e13a ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.
$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.
Stephen Rothwell reported a race condition caused by a module name
conflict:
https://lkml.org/lkml/2019/5/13/991
In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.
Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901 ("kbuild: check uniqueness of module names")
introduced a new checker script.
However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.
To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.
$(MODVERDIR) is no longer needed.
Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.
I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Also, sort the patterns alphabetically. Update the comment since
we have non-git files here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
For completeness, ignore all the allconfig variants.
I added a leading slash because they are only searched in the
top of the tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Problem:
When a kernel module is compiled as a separate module, some important
information about the kernel module is available via .modinfo section of
the module. In contrast, when the kernel module is compiled into the
kernel, that information is not available.
Information about built-in modules is necessary in the following cases:
1. When it is necessary to find out what additional parameters can be
passed to the kernel at boot time.
2. When you need to know which module names and their aliases are in
the kernel. This is very useful for creating an initrd image.
Proposal:
The proposed patch does not remove .modinfo section with module
information from the vmlinux at the build time and saves it into a
separate file after kernel linking. So, the kernel does not increase in
size and no additional information remains in it. Information is stored
in the same format as in the separate modules (null-terminated string
array). Because the .modinfo section is already exported with a separate
modules, we are not creating a new API.
It can be easily read in the userspace:
$ tr '\0' '\n' < modules.builtin.modinfo
ext4.softdep=pre: crc32c
ext4.license=GPL
ext4.description=Fourth Extended Filesystem
ext4.author=Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others
ext4.alias=fs-ext4
ext4.alias=ext3
ext4.alias=fs-ext3
ext4.alias=ext2
ext4.alias=fs-ext2
md_mod.alias=block-major-9-*
md_mod.alias=md
md_mod.description=MD RAID framework
md_mod.license=GPL
md_mod.parmtype=create_on_open:bool
md_mod.parmtype=start_dirty_degraded:int
...
Co-Developed-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.
Check DT binding schema documents:
make dt_binding_check
Build dts files and check using DT binding schema:
make dtbs_check
Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.
Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by
flex, bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by
flex, bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tD6R
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by flex,
bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by flex,
bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: extend output of 'listnewconfig'
kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
Kbuild: fix # escaping in .cmd files for future Make
kbuild: deb-pkg: split generating packaging and build
kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
kbuild: rename *-asn1.[ch] to *.asn1.[ch]
kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
.gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
kbuild: add %.dtb.S and %.dtb to 'targets' automatically
kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
genksyms: generate lexer and parser during build instead of shipping
kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
.gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
kbuild: use HOSTLDFLAGS for single .c executables
