The ReST output should only contain documentation titles
automatically created by the script.
There are two reasons for that:
1) Consistency.
just a handful ABI docs define titles
2) To avoid critical errors.
Docutils (which is the basis for Sphinx) allows a free
assign of documentation title markups. So, one document
could be doing things like:
Level 1
=======
Level 2
-------
While another one could do the reverse:
Level 1
-------
Level 2
=======
But the same document can't mix.
As the output of get_abi.pl will join contents from multiple
files, if they don't define the levels on a consistent errors,
errors like this can happen:
Sphinx parallel build error:
docutils.utils.SystemMessage: /home/rdunlap/lnx/lnx-510-rc2/Documentation/ABI/testing/sysfs-bus-rapidio:2: (SEVERE/4) Title level inconsistent:
Attributes Common for All RapidIO Devices
-----------------------------------------
Which cause some versions of Sphinx to go into an endless
loop.
It should be noticed that an alternative to that would
be to replace all title occurrences by a single markup,
but that will make the parser more complex, and, due to
(1) it would generate an inconsistent output.
So, better to just remove the titles defined at the ABI
files from the output.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6c62ef5c01d39dee8d891f8390c816d2a889670a.1604312590.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some ABI documents that, while they don't generate
any warnings, they have issues when parsed by get_abi.pl script
on its output result.
Address them, in order to provide a clean output.
Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager
Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs
Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The files under Documentation/ABI should follow the syntax
as defined at Documentation/ABI/README.
Allow checking if they're following the syntax by running
the ABI parser script on COMPILE_TEST.
With that, when there's a problem with a file under
Documentation/ABI, it would produce a warning like:
Warning: file ./Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats#14:
What '/sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor' doesn't have a description
Warning: file ./Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats#21:
What '/sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal' doesn't have a description
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/57a38de85cb4b548857207cf1fc1bf1ee08613c9.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are several cross-references that can be automatically
generated:
- References to .rst files inside Documentation/
- References to other ABI files;
- References to ABI symbols at /sys/*.
Add a logic to automatically parse them and convert into
cross references.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/abe756d4f94fb6ffcc3dd3902a766c7c3990ea89.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ABI should define only once each What. The current script
logic assumes that.
However, that's not the case, currently: there are several
symbols with a generic definition, and per-driver ones.
Better handle such cases, by preserving the cross-references
with the files that define them, but also track such
cases, producing warnings, as they should be fixed.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d7a73b8b3aae5b2bff9279996ff9ca4cdfc89196.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, the cross-references are generated on a single
step, when doing ReST output.
While this is nice optimization, it prevents auto-creating
cross-references for ABI symbols.
So, split it into a separate logic.
While here, turn on Perl warnings, as it helps to debug
problems inside the script.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/dbc97c8c2dfd877921f058134c35b2a8b1f8414b.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original parser for indentation were relying on having
just one description for each "what". However, that's not
the case: there are a number of ABI symbols that got defined
multiple times.
Improve the parser for it to better handle descriptions
if entries are duplicated.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/eb458bb30be0e5a89192d6057b2e8a7e910dbcb8.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The get_abi.pl reads a lot of files and can join them on a
single output file. Store where each "What:" output came from,
in order to be able to optionally display it.
This is useful for the Sphinx extension, with can now be
able to blame what ABI file has issues, and on what line
the What: description with problems begin.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/befc387011c5e3c6febd285b7f27610e41c90260.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the source ABI file is using ReST notation, the script
should handle whitespaces and lines with care, as otherwise
the file won't be properly recognized.
Address the bugs that are on such part of the script.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5c22c54fbd0cda797b691d52c568be6d0d1079d8.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, several ABI files won't parse as ReST, as they
contain severe violations to the spec, with makes the script
to crash.
So, the code has a sanity logic with escapes bad code and
cleans tags that can cause Sphinx to crash.
Add support for disabling this mode.
Right now, as enabling rst-mode causes crash, it is disabled
by default.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/34b691e3002e8987c24d851fe37640f95e506a92.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes, we just want the parser to retrieve all symbols from
ABI, in order to check for parsing errors. So, add a new
"validate" command.
While here, update the man/help pages.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ABI README file doesn't provide any meaning for a Where:
tag. Yet, a few ABI symbols use it. So, make the parser
handle it, emitting a warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The file the Documentation/ABI/testing/sysfs-class-power has
voltage_min, voltage_max and voltage_now symbols duplicated.
They are defined first for "General Properties" and then for
"USB Properties".
This cause those warnings:
get_abi.pl rest --dir $srctree/Documentation/ABI/testing:26933: WARNING: Duplicate explicit target name: "abi_sys_class_power_supply_supply_name_voltage_max".
get_abi.pl rest --dir $srctree/Documentation/ABI/testing:26968: WARNING: Duplicate explicit target name: "abi_sys_class_power_supply_supply_name_voltage_min".
get_abi.pl rest --dir $srctree/Documentation/ABI/testing:27008: WARNING: Duplicate explicit target name: "abi_sys_class_power_supply_supply_name_voltage_now".
And, as the references are not valid, it will also generate
warnings about links to undefined references.
Fix it by storing labels into a hash table and, when a duplicated
one is found, appending random characters at the end.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few files are failing to parse:
Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
Documentation/ABI/testing/sysfs-class-pktcdvd
Documentation/ABI/testing/sysfs-bus-nfit
On all three files, the problem is that there is a ":" character
at the initial file description.
Improve the parse in order to handle those special cases.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several entries at the ABI have multiple What: with the same
description.
Instead of showing those symbols as sections, let's show them
as tables. That makes easier to read on the final output,
and avoid too much recursion at Sphinx parsing.
We need to put file references at the end, as we don't want
non-file tables to be mangled with other entries.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change its syntax to allow switching between ReST output mode
and a new search mode, with allows to seek for ABI symbols
using regex.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using a ReST compilant label while parsing,
move the label to ReST output. That makes the parsing logic
more generic, allowing it to provide other types of output.
As a side effect, now all files used to generate the output
will be output. We can later add command line arguments to
filter.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usage of literal blocks make the document very complex,
causing the browser to take a long time to load.
On most ABI descriptions, they're a plain text, and don't
require a literal block.
So, add a logic there with identifies when a literal block
is needed.
As, on literal blocks, we need to respect the original
document space, the most complex part of this patch is
to preserve the original spacing where needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It sounds usefult o parse files with has some text at the
beginning. Add support for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a script to parse the Documentation/ABI files and produce
an output with all entries inside an ABI (sub)directory.
Right now, it outputs its contents on ReST format. It shouldn't
be hard to make it produce other kind of outputs, since the ABI
file parser is implemented in separate than the output generator.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
