Code deallocating the extent path referenced by an argument to
ext4_ext_handle_uninitialized_extents was made redundant with identical
code in its one caller, ext4_ext_map_blocks, by commit 3779473246.
Allocating and deallocating the path in the same function also makes
the code clearer.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for Ext4.
The semantics of this flag are following:
1) It collapses the range lying between offset and length by removing any data
blocks which are present in this range and than updates all the logical
offsets of extents beyond "offset + len" to nullify the hole created by
removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
in case of xfs and ext4.
4) Collaspe range does not work beyond i_size.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Tested-by: Dongsu Park <dongsu.park@profitbricks.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 3779473246 breaks the return of error codes from
ext4_ext_handle_uninitialized_extents() in ext4_ext_map_blocks(). A
portion of the patch assigns that function's signed integer return
value to an unsigned int. Consequently, negatively valued error codes
are lost and can be treated as a bogus allocated block count.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Commit a115f749c1 (ext4: remove wait for unwritten extent conversion from
ext4_truncate) exposed a bug in ext4_ext_handle_uninitialized_extents().
It can be triggered by xfstest generic/299 when run on a test file
system created without a journal. This test continuously fallocates and
truncates files to which random dio/aio writes are simultaneously
performed by a separate process. The test completes successfully, but
if the test filesystem is mounted with the block_validity option, a
warning message stating that a logical block has been mapped to an
illegal physical block is posted in the kernel log.
The bug occurs when an extent is being converted to the written state
by ext4_end_io_dio() and ext4_ext_handle_uninitialized_extents()
discovers a mapping for an existing uninitialized extent. Although it
sets EXT4_MAP_MAPPED in map->m_flags, it fails to set map->m_pblk to
the discovered physical block number. Because map->m_pblk is not
otherwise initialized or set by this function or its callers, its
uninitialized value is returned to ext4_map_blocks(), where it is
stored as a bogus mapping in the extent status tree.
Since map->m_pblk can accidentally contain illegal values that are
larger than the physical size of the file system, calls to
check_block_validity() in ext4_map_blocks() that are enabled if the
block_validity mount option is used can fail, resulting in the logged
warning message.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org # 3.11+
Commit f5a44db5d2 introduced a regression on filesystems created with
the bigalloc feature (cluster size > blocksize). It causes xfstests
generic/006 and /013 to fail with an unexpected JBD2 failure and
transaction abort that leaves the test file system in a read only state.
Other xfstests run on bigalloc file systems are likely to fail as well.
The cause is the accidental use of a cluster mask where a cluster
offset was needed in ext4_ext_map_blocks().
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
The missing casts can cause the high 64-bits of the physical blocks to
be lost. Set up new macros which allows us to make sure the right
thing happen, even if at some point we end up supporting larger
logical block numbers.
Thanks to the Emese Revfy and the PaX security team for reporting this
issue.
Reported-by: PaX Team <pageexec@freemail.hu>
Reported-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
A corrupted ext4 may have out of order leaf extents, i.e.
extent: lblk 0--1023, len 1024, pblk 9217, flags: LEAF UNINIT
extent: lblk 1000--2047, len 1024, pblk 10241, flags: LEAF UNINIT
^^^^ overlap with previous extent
Reading such extent could hit BUG_ON() in ext4_es_cache_extent().
BUG_ON(end < lblk);
The problem is that __read_extent_tree_block() tries to cache holes as
well but assumes 'lblk' is greater than 'prev' and passes underflowed
length to ext4_es_cache_extent(). Fix it by checking for overlapping
extents in ext4_valid_extent_entries().
I hit this when fuzz testing ext4, and am able to reproduce it by
modifying the on-disk extent by hand.
Also add the check for (ee_block + len - 1) in ext4_valid_extent() to
make sure the value is not overflow.
Ran xfstests on patched ext4 and no regression.
Cc: Lukáš Czerner <lczerner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Commit ec22ba8e ("ext4: disable merging of uninitialized extents")
ensured that if either extent under consideration is uninit, we
decline to merge, and ext4_can_extents_be_merged() returns false.
So there is no need for the caller to then test whether the
extent under consideration is unitialized; if it were, we
wouldn't have gotten that far.
The comments were also inaccurate; ext4_can_extents_be_merged()
no longer XORs the states, it fails if *either* is uninit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Commit ec22ba8e ("ext4: disable merging of uninitialized extents")
ensured that if either extent under consideration is uninit, we
decline to merge, and immediately return.
But right after that test, we test again for an uninit
extent; we can never hit this. So just remove the impossible
test and associated variable.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
After applied the commit (4a092d73), we have reduced the number of
source files that need to #include ext4_extents.h. But we can do
better.
This commit defines ext4_zeroout_es() in extents.c and move
EXT_MAX_BLOCKS into ext4.h in order not to include ext4_extents.h in
indirect.c and ioctl.c. Meanwhile we just need to include this file in
extent_status.c when ES_AGGRESSIVE_TEST is defined. Otherwise, this
commit removes a duplicated declaration in trace/events/ext4.h.
After applied this patch, we just need to include ext4_extents.h file
in {super,migrate,move_extents,extents}.c, and it is easy for us to
define a new extent disk layout.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If ext_debugging is enabled and path[depth].p_ext is NULL, len
and lblock are printed non initialized
Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
reaim workfile.dbase test easily triggers warning in
ext4_da_update_reserve_space():
EXT4-fs warning (device ram0): ext4_da_update_reserve_space:365:
ino 12, allocated 1 with only 0 reserved metadata blocks (releasing 1
blocks with reserved 9 data blocks)
The problem is that (one of) tests creates file and then randomly writes
to it with O_SYNC. That results in writing back pages of the file in
random order so we create extents for written blocks say 0, 2, 4, 6, 8
- this last allocation also allocates new block for extents. Then we
writeout block 1 so we have extents 0-2, 4, 6, 8 and we release
indirect extent block because extents fit in the inode again. Then we
writeout block 10 and we need to allocate indirect extent block again
which triggers the warning because we don't have the reservation
anymore.
Fix the problem by giving back freed metadata blocks resulting from
extent merging into inode's reservation pool.
Signed-off-by: Jan Kara <jack@suse.cz>
Add a new fiemap flag which forces the all of the extents in an inode
to be cached in the extent_status tree. This is critically important
when using AIO to a preallocated file, since if we need to read in
blocks from the extent tree, the io_submit(2) system call becomes
synchronous, and the AIO is no longer "A", which is bad.
In addition, for most files which have an external leaf tree block,
the cost of caching the information in the extent status tree will be
less than caching the entire 4k block in the buffer cache. So it is
generally a win to keep the extent information cached.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we read in an extent tree leaf block from disk, arrange to have
all of its entries cached. In nearly all cases the in-memory
representation will be more compact than the on-disk representation in
the buffer cache, and it allows us to get the information without
having to traverse the extent tree for successive extents.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
When we find an invalid extent tree block, report the block number of
the bad block for debugging purposes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Refactor out the code needed to read the extent tree block into a
single read_extent_tree_block() function. In addition to simplifying
the code, it also makes sure that we call the ext4_ext_load_extent
tracepoint whenever we need to read an extent tree block from disk.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
If there are no items in the extent status tree, ext4_es_lru_add() is
a no-op. So it is not sufficient to call ext4_es_lru_add() before we
try to lookup an entry in the extent status tree. We also need to
call it at the end of ext4_ext_map_blocks(), after items have been
added to the extent status tree.
This could lead to inodes with that have extent status trees but which
are not in the LRU list, which means they won't get considered for
eviction by the es_shrinker.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
During large unlink operations on files with extents, we can use a lot
of CPU time. This adds a cond_resched() call when starting to examine
the next level of a multi-level extent tree. Multi-level extent trees
are rare in the first place, and this should rarely be executed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_ext_map_blocks(), if we have successfully allocated the data
blocks, but then run into trouble inserting the extent into the extent
tree, most likely due to an ENOSPC condition, determine the arguments
to ext4_free_blocks() in a simpler way which is easier to prove to be
correct.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously ext4_ext_truncate() was ignoring potential error returns
from ext4_es_remove_extent() and ext4_ext_remove_space(). This can
lead to the on-diks extent tree and the extent status tree cache
getting out of sync, which is particuarlly bad, and can lead to file
system corruption and potential data loss.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Both hole punch and truncate use ext4_ext_rm_leaf() for removing
blocks. Currently we choose the last extent as the starting
point for removing blocks:
ex = EXT_LAST_EXTENT(eh);
This is OK for truncate but for hole punch we can optimize the extent
selection as the path is already initialized. We could use this
information to select proper starting extent. The code change in this
patch will not affect truncate as for truncate path[depth].p_ext will
always be NULL.
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Translate the bitfields used in various flags argument to strings to
make the tracepoint output more human-readable.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
No need to pass file pointer when we can directly pass inode pointer.
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Return the FIEMAP_EXTENT_UNKNOWN flag as well except the
FIEMAP_EXTENT_DELALLOC because the data location of an
delayed allocation extent is unknown.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Commit 18888cf088: "ext4: speed up truncate/unlink by not using
bforget() unless needed" removed the use of EXT4_FREE_BLOCKS_FORGET in
the most important codepath for file systems using extents, but a
similar optimization also can be done for file systems using indirect
blocks, and for the two special cases in the ext4 extents code.
Cc: Andrey Sidorov <qrxd43@motorola.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Later we would like to clear PageWriteback bit only after extent
conversion from unwritten to written extents is performed. However it
is not possible to start a transaction after PageWriteback is set
because that violates lock ordering (and is easy to deadlock). So we
have to reserve a transaction before locking pages and sending them
for IO and later we use the transaction for extent conversion from
ext4_end_io().
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We limit the number of blocks written in a single loop of
ext4_da_writepages() to 64 when inode uses indirect blocks. That is
unnecessary as credit estimates for mapping logically continguous run
of blocks is rather low even for inode with indirect blocks. So just
lift this limitation and properly calculate the number of necessary
credits.
This better credit estimate will also later allow us to always write
at least a single page in one iteration.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On 32-bit architectures with 32-bit sector_t computation of data offset
in ext4_xattr_fiemap() can overflow resulting in reporting bogus data
location. Fix the problem by typing block number to proper type before
shifting.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently punch hole is disabled in file systems with bigalloc
feature enabled. However the recent changes in punch hole patch should
make it easier to support punching holes on bigalloc enabled file
systems.
This commit changes partial_cluster handling in ext4_remove_blocks(),
ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently
partial_cluster is unsigned long long type and it makes sure that we
will free the partial cluster if all extents has been released from that
cluster. However it has been specifically designed only for truncate.
With punch hole we can be freeing just some extents in the cluster
leaving the rest untouched. So we have to make sure that we will notice
cluster which still has some extents. To do this I've changed
partial_cluster to be signed long long type. The only scenario where
this could be a problem is when cluster_size == block size, however in
that case there would not be any partial clusters so we're safe. For
bigger clusters the signed type is enough. Now we use the negative value
in partial_cluster to mark such cluster used, hence we know that we must
not free it even if all other extents has been freed from such cluster.
This scenario can be described in simple diagram:
|FFF...FF..FF.UUU|
^----------^
punch hole
. - free space
| - cluster boundary
F - freed extent
U - used extent
Also update respective tracepoints to use signed long long type for
partial_cluster.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The "head removal" branch in the condition is never used in any code
path in ext4 since the function only caller ext4_ext_rm_leaf() will make
sure that the extent is properly split before removing blocks. Note that
there is a bug in this branch anyway.
This commit removes the unused code completely and makes use of
ext4_error() instead of printk if dubious range is provided.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We (Linux Kernel Performance project) found a regression introduced
by commit:
f7fec032aa ext4: track all extent status in extent status tree
The commit causes about 20% performance decrease in fio random write
test. Profiler shows that rb_next() uses a lot of CPU time. The call
stack is:
rb_next
ext4_es_find_delayed_extent
ext4_map_blocks
_ext4_get_block
ext4_get_block_write
__blockdev_direct_IO
ext4_direct_IO
generic_file_direct_write
__generic_file_aio_write
ext4_file_write
aio_rw_vect_retry
aio_run_iocb
do_io_submit
sys_io_submit
system_call_fastpath
io_submit
td_io_getevents
io_u_queued_complete
thread_main
main
__libc_start_main
The cause is that ext4_es_find_delayed_extent() doesn't have an
upper bound, it keeps searching until a delayed extent is found.
When there are a lots of non-delayed entries in the extent state
tree, ext4_es_find_delayed_extent() may uses a lot of CPU time.
Reported-by: LKP project <lkp@linux.intel.com>
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Move ext4_ind_migrate() into migrate.c file since it makes much more
sense and ext4_ext_migrate() is there as well.
Also fix tiny style problem - add spaces around "=" in "i=0".
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in ENOSPC condition when writing into unwritten space, or
punching a hole, we might need to split the extent and grow extent tree.
However since we can not allocate any new metadata blocks we'll have to
zero out unwritten part of extent or punched out part of extent, or in
the worst case return ENOSPC even though use actually does not allocate
any space.
Also in delalloc path we do reserve metadata and data blocks for the
time we're going to write out, however metadata block reservation is
very tricky especially since we expect that logical connectivity implies
physical connectivity, however that might not be the case and hence we
might end up allocating more metadata blocks than previously reserved.
So in future, metadata reservation checks should be removed since we can
not assure that we do not under reserve.
And this is where reserved space comes into the picture. When mounting
the file system we slice off a little bit of the file system space (2%
or 4096 clusters, whichever is smaller) which can be then used for the
cases mentioned above to prevent costly zeroout, or unexpected ENOSPC.
The number of reserved clusters can be set via sysfs, however it can
never be bigger than number of free clusters in the file system.
Note that this patch fixes the failure of xfstest 274 as expected.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
existing locking ordering: journal-> i_data_sem, but
ext4_ind_migrate() grab locks in opposite order which may result in
deadlock.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently when inserting extent in ext4_ext_insert_extent() we would
only try to to see if we can append new extent to the found extent. If
we can not, then we proceed with adding new extent into the extent tree,
but then possibly merging it back again.
We can avoid this situation by trying to append and prepend new extent
to the existing ones. However since the new extent can be on either
sides of the existing extent, we have to pick the right extent to try to
append/prepend to.
This patch adds the conditions to pick the right extent to
append/prepend to and adds the actual prepending condition as well. This
will also eliminate the need to use "reserved" block for possibly
growing extent tree.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently when converting extent to initialized we attempt to transfer
initialized block to the left neighbour if possible when certain
criteria are met. However we do not attempt to do the same for the
right neighbor.
This commit adds the possibility to transfer initialized block to the
right neighbour if:
1. We're not converting the whole extent
2. Both extents are stored in the same extent tree node
3. Right neighbor is initialized
4. Right neighbor is logically abutting the current one
5. Right neighbor is physically abutting the current one
6. Right neighbor would not overflow the length limit
This is basically the same logic as with transferring to the left. This
will gain us some performance benefits since it is faster than inserting
extent and then merging it.
It would also prevent some situation in delalloc patch when we might run
out of metadata reservation. This is due to the fact that we would
attempt to split the extent first (possibly allocating new metadata
block) even though we did not counted for that because it can (and will)
be merged again. This commit fix that scenario, because we no longer
need to split the extent in such case.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
In order to make it simpler to test the code which support
i_blocks/indirect-mapped inodes, support the conversion of inodes
which are less than 12 blocks and which are contained in no more than
a single extent.
The primary intended use of this code is to converting freshly created
zero-length files and empty directories.
Note that the version of chattr in e2fsprogs 1.42.7 and earlier has a
check that prevents the clearing of the extent flag. A simple patch
which allows "chattr -e <file>" to work will be checked into the
e2fsprogs git repository.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move common code in ext4_ind_truncate() and ext4_ext_truncate() into
ext4_truncate(). This saves over 60 lines of code.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move common code in ext4_ind_punch_hole() and ext4_ext_punch_hole()
into ext4_punch_hole(). This saves over 150 lines of code.
This also fixes a potential bug when the punch_hole() code is racing
against indirect-to-extents or extents-to-indirect migation. We are
currently using i_mutex to protect against changes to the inode flag;
specifically, the append-only, immutable, and extents inode flags. So
we need to take i_mutex before deciding whether to use the
extents-specific or indirect-specific punch_hole code.
Also, there was a missing call to ext4_inode_block_unlocked_dio() in
the indirect punch codepath. This was added in commit 02d262dffc
to block DIO readers racing against the punch operation in the
codepath for extent-mapped inodes, but it was missing for
indirect-block mapped inodes. One of the advantages of refactoring
the code is that it makes such oversights much less likely.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When an extent was zeroed out, we forgot to do convert from cpu to le16.
It could make us hit a BUG_ON when we try to write dirty pages out. So
fix it.
[ Also fix a bug found by Dmitry Monakhov where we were missing
le32_to_cpu() calls in the new indirect punch hole code.
There are a number of other big endian warnings found by static code
analyzers, but we'll wait for the next merge window to fix them all
up. These fixes are designed to be Obviously Correct by code
inspection, and easy to demonstrate that it won't make any
difference (and hence, won't introduce any bugs) on little endian
architectures such as x86. --tytso ]
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: CAI Qian <caiqian@redhat.com>
Reported-by: Christian Kujau <lists@nerdbynature.de>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
relatively obscure cornercases or races that were found using
regression tests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=X3vc
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of regression and other bugs in ext4, most of which were
relatively obscure cornercases or races that were found using
regression tests."
* tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
ext4: fix data=journal fast mount/umount hang
ext4: fix ext4_evict_inode() racing against workqueue processing code
ext4: fix memory leakage in mext_check_coverage
ext4: use s_extent_max_zeroout_kb value as number of kb
ext4: use atomic64_t for the per-flexbg free_clusters count
jbd2: fix use after free in jbd2_journal_dirty_metadata()
ext4: reserve metadata block for every delayed write
ext4: update reserved space after the 'correction'
ext4: do not use yield()
ext4: remove unused variable in ext4_free_blocks()
ext4: fix WARN_ON from ext4_releasepage()
ext4: fix the wrong number of the allocated blocks in ext4_split_extent()
ext4: update extent status tree after an extent is zeroed out
ext4: fix wrong m_len value after unwritten extent conversion
ext4: add self-testing infrastructure to do a sanity check
ext4: avoid a potential overflow in ext4_es_can_be_merged()
ext4: invalidate extent status tree during extent migration
ext4: remove unnecessary wait for extent conversion in ext4_fallocate()
ext4: add warning to ext4_convert_unwritten_extents_endio
ext4: disable merging of uninitialized extents
...
Currently when converting extent to initialized, we have to decide
whether to zeroout part/all of the uninitialized extent in order to
avoid extent tree growing rapidly.
The decision is made by comparing the size of the extent with the
configurable value s_extent_max_zeroout_kb which is in kibibytes units.
However when converting it to number of blocks we currently use it as it
was in bytes. This is obviously bug and it will result in ext4 _never_
zeroout extents, but rather always split and convert parts to
initialized while leaving the rest uninitialized in default setting.
Fix this by using s_extent_max_zeroout_kb as kibibytes.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently in ext4_ext_map_blocks() in delayed allocation writeback
we would update the reservation and after that check whether we claimed
cluster outside of the range of the allocation and if so, we'll give the
block back to the reservation pool.
However this also means that if the number of reserved data block
dropped to zero before the correction, we would release all the metadata
reservation as well, however we might still need it because the we're
not done with the delayed allocation and there might be more blocks to
come. This will result in error messages such as:
EXT4-fs warning (device sdb): ext4_da_update_reserve_space:361: ino 12,
allocated 1 with only 0 reserved metadata blocks (releasing 1 blocks
with reserved 1 data blocks)
This will only happen on bigalloc file system and it can be easily
reproduced using fiemap-tester from xfstests like this:
./src/fiemap-tester -m DHDHDHDHD -S -p0 /mnt/test/file
Or using xfstests such as 225.
Fix this by doing the correction first and updating the reservation
after that so that we do not accidentally decrease
i_reserved_data_blocks to zero.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit fixes a wrong return value of the number of the allocated
blocks in ext4_split_extent. When the length of blocks we want to
allocate is greater than the length of the current extent, we return a
wrong number. Let's see what happens in the following case when we
call ext4_split_extent().
map: [48, 72]
ex: [32, 64, u]
'ex' will be split into two parts:
ex1: [32, 47, u]
ex2: [48, 64, w]
'map->m_len' is returned from this function, and the value is 24. But
the real length is 16. So it should be fixed.
Meanwhile in this commit we use right length of the allocated blocks
when get_reserved_cluster_alloc in ext4_ext_handle_uninitialized_extents
is called.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
When we try to split an extent, this extent could be zeroed out and mark
as initialized. But we don't know this in ext4_map_blocks because it
only returns a length of allocated extent. Meanwhile we will mark this
extent as uninitialized because we only check m_flags.
This commit update extent status tree when we try to split an unwritten
extent. We don't need to worry about the status of this extent because
we always mark it as initialized.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
The ext4_ext_handle_uninitialized_extents() function was assuming the
return value of ext4_ext_map_blocks() is equal to map->m_len. This
incorrect assumption was harmless until we started use status tree as
a extent cache because we need to update status tree according to
'm_len' value.
Meanwhile this commit marks EXT4_MAP_MAPPED flag after unwritten extent
conversion. It shouldn't cause a bug because we update status tree
according to checking EXT4_MAP_UNWRITTEN flag. But it should be fixed.
After applied this commit, the following error message from self-testing
infrastructure disappears.
...
kernel: ES len assertation failed for inode: 230 retval 1 !=
map->m_len 3 in ext4_map_blocks (allocation)
...
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Now that we don't merge uninitialized extents anymore,
ext4_fallocate() is free to operate on the inode while there are still
some extent conversions pending - it won't disturb them in any way.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Splitting extents inside endio is a bad thing, but unfortunately it is
still possible. In fact we are pretty close to the moment when all
related issues will be fixed. Let's warn developer if it still the
case.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Derived from Jan's patch:http://permalink.gmane.org/gmane.comp.file-systems.ext4/36470
Merging of uninitialized extents creates all sorts of interesting race
possibilities when writeback / DIO races with fallocate. Thus
ext4_convert_unwritten_extents_endio() has to deal with a case where
extent to be converted needs to be split out first. That isn't nice
for two reasons:
1) It may need allocation of extent tree block so ENOSPC is possible.
2) It complicates end_io handling code
So we disable merging of uninitialized extents which allows us to simplify
the code. Extents will get merged after they are converted to initialized
ones.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
When ext4_split_extent_at() ends up doing zeroout & conversion to
initialized instead of split & conversion, ext4_split_extent() gets
confused and can wrongly mark the extent back as uninitialized
resulting in end IO code getting confused from large unwritten extents
and may result in data loss.
The example of problematic behavior is:
lblk len lblk len
ext4_split_extent() (ex=[1000,30,uninit], map=[1010,10])
ext4_split_extent_at() (split [1000,30,uninit] at 1020)
ext4_ext_insert_extent() -> ENOSPC
ext4_ext_zeroout()
-> extent [1000,30] is now initialized
ext4_split_extent_at() (split [1000,30,init] at 1010,
MARK_UNINIT1 | MARK_UNINIT2)
-> extent is split and parts marked as uninitialized
Fix the problem by rechecking extent type after the first
ext4_split_extent_at() returns. None of split_flags can not be applied
to initialized extent so this patch also add BUG_ON to prevent similar
issues in future.
TESTCASE: b8a55eb5ce
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
Single extent cache could be removed because we have extent status tree
as a extent cache, and it would be better.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
After tracking all extent status, we already have a extent cache in
memory. Every time we want to lookup a block mapping, we can first
try to lookup it in extent status tree to avoid a potential disk I/O.
A new function called ext4_es_lookup_extent is defined to finish this
work. When we try to lookup a block mapping, we always call
ext4_map_blocks and/or ext4_da_map_blocks. So in these functions we
first try to lookup a block mapping in extent status tree.
A new flag EXT4_GET_BLOCKS_NO_PUT_HOLE is used in ext4_da_map_blocks
in order not to put a hole into extent status tree because this hole
will be converted to delayed extent in the tree immediately.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
By recording the phycisal block and status, extent status tree is able
to track the status of every extents. When we call _map_blocks
functions to lookup an extent or create a new written/unwritten/delayed
extent, this extent will be inserted into extent status tree.
We don't load all extents from disk in alloc_inode() because it costs
too much memory, and if a file is opened and closed frequently it will
takes too much time to load all extent information. So currently when
we create/lookup an extent, this extent will be inserted into extent
status tree. Hence, the extent status tree may not comprehensively
contain all of the extents found in the file.
Here a condition we need to take care is that an extent might contains
unwritten and delayed status simultaneously because an extent is delayed
allocated and could be allocated by fallocate. At this time we need to
keep delayed status because later we need to update delayed reservation
space using it.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
This commit lets ext4_ext_map_blocks return EXT4_MAP_UNWRITTEN flag
because in later commit ext4_map_blocks needs to use this flag to
determine the extent status.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
This commit renames ext4_es_find_extent with ext4_es_find_delayed_extent
and improve this function. First, we split input and output parameter.
Second, this function never return the first block of the next delayed
extent after 'es'.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
This commit refines the extent status tree code.
1) A prefix 'es_' is added to to the extent status tree structure
members.
2) Refactored es_remove_extent() so that __es_remove_extent() can be
used by es_insert_extent() to remove the old extent entry(-ies) before
inserting a new one.
3) Rename extent_status_end() to ext4_es_end()
4) ext4_es_can_be_merged() is define to check whether two extents can
be merged or not.
5) Update and clarified comments.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
So we can better understand what bits of ext4 are responsible for
long-running jbd2 handles, use jbd2__journal_start() so we can pass
context information for logging purposes.
The recommended way for finding the longer-running handles is:
T=/sys/kernel/debug/tracing
EVENT=$T/events/jbd2/jbd2_handle_stats
echo "interval > 5" > $EVENT/filter
echo 1 > $EVENT/enable
./run-my-fs-benchmark
cat $T/trace > /tmp/problem-handles
This will list handles that were active for longer than 20ms. Having
longer-running handles is bad, because a commit started at the wrong
time could stall for those 20+ milliseconds, which could delay an
fsync() or an O_SYNC operation. Here is an example line from the
trace file describing a handle which lived on for 311 jiffies, or over
1.2 seconds:
postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32
tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
dirtied_blocks 0
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In two places we call WARN_ON() before we print out the debug message,
however we agreed that the WARN_ON() is unnecessary at those places so
remove them.
Also use ext4_warning() instead of ext4_msg() and printk().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch add supports for indirect file support punching hole. It
is almost the same as ext4_ext_punch_hole. First, we invalidate all
pages between this hole, and then we try to deallocate all blocks of
this hole.
A recursive function is used to handle deallocation of blocks. In
this function, it iterates over the entries in inode's i_blocks or
indirect blocks, and try to free the block for each one of them.
After applying this patch, xfstest #255 will not pass w/o extent because
indirect-based file doesn't support unwritten extents.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Because the function 'sb_getblk' seldomly fails to return NULL
value,it will be better to use 'unlikely' to optimize it.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The only reason for sb_getblk() failing is if it can't allocate the
buffer_head. So ENOMEM is more appropriate than EIO. In addition,
make sure that the file system is marked as being inconsistent if
sb_getblk() fails.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
When depth of extent tree is greater than 1, logical start value of
interior node is not correctly updated in ext4_ext_rm_idx.
Signed-off-by: Forrest Liu <forrestl@synology.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Ashish Sangwan <ashishsangwan2@gmail.com>
Cc: stable@vger.kernel.org
If we are punching hole in a file, we will return ENOTSUPP.
As for the fallocation of some extents, we will convert the
inline data to a normal extent based file first.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
fiemap is used to find the disk layout of a file, as for inline data,
let us just pretend like a file with just one extent.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For a normal write case (not journalled write, not delayed
allocation), we write to the inline if the file is small and convert
it to an extent based file when the write is larger than the max
inline size.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously, ext4_extents.h was being included at the end of ext4.h,
which was bad for a number of reasons: (a) it was not being included
in the expected place, and (b) it caused the header to be included
multiple times. There were #ifdef's to prevent this from causing any
problems, but it still was unnecessary.
By moving the function declarations that were in ext4_extents.h to
ext4.h, which is standard practice for where the function declarations
for the rest of ext4.h can be found, we can remove ext4_extents.h from
being included in ext4.h at all, and then we can only include
ext4_extents.h where it is needed in ext4's source files.
It should be possible to move a few more things into ext4.h, and
further reduce the number of source files that need to #include
ext4_extents.h, but that's a cleanup for another day.
Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
Reported-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit is simple cleanup of fiemap codepath which has not been
included in previous commit to make the changes clearer. In this commit
we rename cbex variable to newex in ext4_fill_fiemap_extents() because
callback is no longer present
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently ext4_ext_walk_space() only takes i_data_sem for read when
searching for the extent at given block with ext4_ext_find_extent().
Then it drops the lock and the extent tree can be changed at will.
However later on we're searching for the 'next' extent, but the extent
tree might already have changed, so the information might not be
accurate.
In fact we can hit BUG_ON(end <= start) if the extent got inserted into
the tree after the one we found and before the block we were searching
for. This has been reproduced by running xfstests 225 in loop on s390x
architecture, but theoretically we could hit this on any other
architecture as well, but probably not as often.
Moreover the extent currently in delayed allocation might be allocated
after we search the extent tree and before we search extent status tree
delayed buffers resulting in those delayed buffers being completely
missed, even though completely written and allocated.
We fix all those problems in several steps:
1. remove unnecessary callback indirection
2. rename functions
ext4_ext_walk_space -> ext4_fill_fiemap_extents
ext4_ext_fiemap_cb -> ext4_find_delayed_extent
3. move fiemap_fill_next_extent() into ext4_fill_fiemap_extents()
4. hold the i_data_sem for:
ext4_ext_find_extent()
ext4_ext_next_allocated_block()
ext4_find_delayed_extent()
5. call fiemap_fill_next_extent after releasing the i_data_sem
6. move path reinitialization into the critical section.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch lets ext4 maintain extent status tree.
Currently it only tracks delay extent status in extent status tree. When a
delay allocation is issued, the related delay extent will be inserted into
extent status tree. When a delay extent is written out or invalidated, it will
be removed from this tree.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: Allison Henderson <achender@linux.vnet.ibm.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When ext4_ext_handle_uninitialized_extents(), we will directly return
from ext4_ext_map_blocks(). The trace point of
trace_ext4_ext_map_blocks_exit isn't called, and the user doesn't see
any result. This patch tries to fix this problem.
Meanwhile in ext4_ext_handle_uninitialized_extents it returns errors
or the number of allocated blocks. So 'ret' variable can be removed
due to previously modifications.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
When we use trace_ext4_ext/ind_map_blocks_exit, print the value of
map->m_flags in order that we can understand the extent's current
status.
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In trace_ext4_ext_handle_uninitialized_extents we don't care about the
value of map->m_flags because this value is probably 0, and we prefer
to get the value of flags because we can know how to handle this
extent in this function.
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We assumed that at the time we call ext4_convert_unwritten_extents_endio()
extent in question is fully inside [map.m_lblk, map->m_len] because
it was already split during submission. But this may not be true due to
a race between writeback vs fallocate.
If extent in question is larger than requested we will split it again.
Special precautions should being done if zeroout required because
[map.m_lblk, map->m_len] already contains valid data.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Fallocate should wait for pended ext4_convert_unwritten_extents()
otherwise following race may happen:
ftruncate( ,12288);
fallocate( ,0, 4096)
io_sibmit( ,0, 4096); /* Write to fallocated area, split extent if needed */
fallocate( ,0, 8192); /* Grow extent and broke assumption about extent */
Later kwork completion will do:
->ext4_convert_unwritten_extents (0, 4096)
->ext4_map_blocks(handle, inode, &map, EXT4_GET_BLOCKS_IO_CONVERT_EXT);
->ext4_ext_map_blocks() /* Will find new extent: ex = [0,2] !!!!!! */
->ext4_ext_handle_uninitialized_extents()
->ext4_convert_unwritten_extents_endio()
/* convert [0,2] extent to initialized, but only[0,1] was written */
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
BUG #1) All places where we call ext4_flush_completed_IO are broken
because buffered io and DIO/AIO goes through three stages
1) submitted io,
2) completed io (in i_completed_io_list) conversion pended
3) finished io (conversion done)
And by calling ext4_flush_completed_IO we will flush only
requests which were in (2) stage, which is wrong because:
1) punch_hole and truncate _must_ wait for all outstanding unwritten io
regardless to it's state.
2) fsync and nolock_dio_read should also wait because there is
a time window between end_page_writeback() and ext4_add_complete_io()
As result integrity fsync is broken in case of buffered write
to fallocated region:
fsync blkdev_completion
->filemap_write_and_wait_range
->ext4_end_bio
->end_page_writeback
<-- filemap_write_and_wait_range return
->ext4_flush_completed_IO
sees empty i_completed_io_list but pended
conversion still exist
->ext4_add_complete_io
BUG #2) Race window becomes wider due to the 'ext4: completed_io
locking cleanup V4' patch series
This patch make following changes:
1) ext4_flush_completed_io() now first try to flush completed io and when
wait for any outstanding unwritten io via ext4_unwritten_wait()
2) Rename function to more appropriate name.
3) Assert that all callers of ext4_flush_unwritten_io should hold i_mutex to
prevent endless wait
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Inode is allowed to have empty leaf only if it this is blockless inode.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
punch_hole is the place where we have to wait for all existing writers
(writeback, aio, dio), but currently we simply flush pended end_io request
which is not sufficient. Other issue is that punch_hole performed w/o i_mutex
held which obviously result in dangerous data corruption due to
write-after-free.
This patch performs following changes:
- Guard punch_hole with i_mutex
- Recheck inode flags under i_mutex
- Block all new dio readers in order to prevent information leak caused by
read-after-free pattern.
- punch_hole now wait for all writers in flight
NOTE: XXX write-after-free race is still possible because new dirty pages
may appear due to mmap(), and currently there is no easy way to stop
writeback while punch_hole is in progress.
[ Fixed error return from ext4_ext_punch_hole() to make sure that we
release i_mutex before returning EPERM or ETXTBUSY -- Ted ]
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Current unwritten extent conversion state-machine is very fuzzy.
- For unknown reason it performs conversion under i_mutex. What for?
My diagnosis:
We already protect extent tree with i_data_sem, truncate and punch_hole
should wait for DIO, so the only data we have to protect is end_io->flags
modification, but only flush_completed_IO and end_io_work modified this
flags and we can serialize them via i_completed_io_lock.
Currently all these games with mutex_trylock result in the following deadlock
truncate: kworker:
ext4_setattr ext4_end_io_work
mutex_lock(i_mutex)
inode_dio_wait(inode) ->BLOCK
DEADLOCK<- mutex_trylock()
inode_dio_done()
#TEST_CASE1_BEGIN
MNT=/mnt_scrach
unlink $MNT/file
fallocate -l $((1024*1024*1024)) $MNT/file
aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file
sleep 2
truncate -s 0 $MNT/file
#TEST_CASE1_END
Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286
This patch makes state machine simple and clean:
(1) xxx_end_io schedule final extent conversion simply by calling
ext4_add_complete_io(), which append it to ei->i_completed_io_list
NOTE1: because of (2A) work should be queued only if
->i_completed_io_list was empty, otherwise the work is scheduled already.
(2) ext4_flush_completed_IO is responsible for handling all pending
end_io from ei->i_completed_io_list
Flushing sequence consists of following stages:
A) LOCKED: Atomically drain completed_io_list to local_list
B) Perform extents conversion
C) LOCKED: move converted io's to to_free list for final deletion
This logic depends on context which we was called from.
D) Final end_io context destruction
NOTE1: i_mutex is no longer required because end_io->flags modification
is protected by ei->ext4_complete_io_lock
Full list of changes:
- Move all completion end_io related routines to page-io.c in order to improve
logic locality
- Move open coded logic from various xx_end_xx routines to ext4_add_complete_io()
- remove EXT4_IO_END_FSYNC
- Improve SMP scalability by removing useless i_mutex which does not
protect io->flags anymore.
- Reduce lock contention on i_completed_io_lock by optimizing list walk.
- Rename ext4_end_io_nolock to end4_end_io and make it static
- Check flush completion status to ext4_ext_punch_hole(). Because it is
not good idea to punch blocks from corrupted inode.
Changes since V3 (in request to Jan's comments):
Fall back to active flush_completed_IO() approach in order to prevent
performance issues with nolocked DIO reads.
Changes since V2:
Fix use-after-free caused by race truncate vs end_io_work
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_set_io_unwritten_flag() will increment i_unwritten counter, so
once we mark end_io with EXT4_END_IO_UNWRITTEN we have to revert it back
on error path.
- add missed error checks to prevent counter leakage
- ext4_end_io_nolock() will clear EXT4_END_IO_UNWRITTEN flag to signal
that conversion finished.
- add BUG_ON to ext4_free_end_io() to prevent similar leakage in future.
Visible effect of this bug is that unaligned aio_stress may deadlock
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Generic inode has unused i_private pointer which may be used as cur_aio_dio
storage.
TODO: If cur_aio_dio will be passed as an argument to get_block_t this allow
to have concurent AIO_DIO requests.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Convert cpu_to_leXX(leXX_to_cpu(E1) + E2) to use leXX_add_cpu().
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Remove unused function ext4_ext_check_cache() and merge the code back to
the ext4_ext_in_cache().
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Do not iterate over data blocks scanning for bh's to forget as they're
never exist. This improves time taken by unlink / truncate syscall.
Tested by continuously truncating file that is being written by dd.
Another test is rm -rf of linux tree while tar unpacks it. With
ordered data mode condition unlikely(!tbh) was always met in
ext4_free_blocks. With journal data mode tbh was found only few times,
so optimisation is also possible.
Unlinking fallocated 60G file after doing sync && echo 3 >
/proc/sys/vm/drop_caches && time rm --help
X86 before (linux 3.6-rc4):
# time rm -f test1
real 0m2.710s
user 0m0.000s
sys 0m1.530s
X86 after:
# time rm -f test1
real 0m0.644s
user 0m0.003s
sys 0m0.060s
MIPS before (linux 2.6.37):
# time rm -f test1
real 0m 4.93s
user 0m 0.00s
sys 0m 4.61s
MIPS after:
# time rm -f test1
real 0m 0.16s
user 0m 0.00s
sys 0m 0.06s
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrey Sidorov <qrxd43@motorola.com>
While performing punch hole for an inode, i_disksize is not changed.
So, there is no need to add the inode to orphan list.
Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in ext4 the length of zero-out chunk is set to 7 file system
blocks. But if an inode has uninitailized extents from using
fallocate to preallocate space, and the workload issues many random
writes, this can cause a fragmented extent tree that will
unnecessarily grow the extent tree.
So create a new sysfs tunable, extent_max_zeroout_kb, which controls
the maximum size where blocks will be zeroed out instead of creating a
new uninitialized extent. The default of this has been sent to 32kb.
CC: Zach Brown <zab@zabbo.net>
CC: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If an inode has more than 4 extents, but then later some of the
extents are merged together, we can optimize the file system by moving
the extents up into the inode, and discarding the extent tree block.
This is important, because if there are a large number of inodes with
an external extent tree blocks where the contents could fit in the
inode, this can significantly increase the fsck time of the file
system.
Google-Bug-Id: 6801242
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 968dee7722: "ext4: fix hole punch failure when depth is greater
than 0" introduced a regression in v3.5.1/v3.6-rc1 which caused kernel
crashes when users ran run "rm -rf" on large directory hierarchy on
ext4 filesystems on RAID devices:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
Process rm (pid: 18229, threadinfo ffff8801276bc000, task ffff880123631710)
Call Trace:
[<ffffffff81236483>] ? __ext4_handle_dirty_metadata+0x83/0x110
[<ffffffff812353d3>] ext4_ext_truncate+0x193/0x1d0
[<ffffffff8120a8cf>] ? ext4_mark_inode_dirty+0x7f/0x1f0
[<ffffffff81207e05>] ext4_truncate+0xf5/0x100
[<ffffffff8120cd51>] ext4_evict_inode+0x461/0x490
[<ffffffff811a1312>] evict+0xa2/0x1a0
[<ffffffff811a1513>] iput+0x103/0x1f0
[<ffffffff81196d84>] do_unlinkat+0x154/0x1c0
[<ffffffff8118cc3a>] ? sys_newfstatat+0x2a/0x40
[<ffffffff81197b0b>] sys_unlinkat+0x1b/0x50
[<ffffffff816135e9>] system_call_fastpath+0x16/0x1b
Code: 8b 4d 20 0f b7 41 02 48 8d 04 40 48 8d 04 81 49 89 45 18 0f b7 49 02 48 83 c1 01 49 89 4d 00 e9 ae f8 ff ff 0f 1f 00 49 8b 45 28 <48> 8b 40 28 49 89 45 20 e9 85 f8 ff ff 0f 1f 80 00 00 00
RIP [<ffffffff81233164>] ext4_ext_remove_space+0xa34/0xdf0
This could be reproduced as follows:
The problem in commit 968dee7722 was that caused the variable 'i' to
be left uninitialized if the truncate required more space than was
available in the journal. This resulted in the function
ext4_ext_truncate_extend_restart() returning -EAGAIN, which caused
ext4_ext_remove_space() to restart the truncate operation after
starting a new jbd2 handle.
Reported-by: Maciej Żenczykowski <maze@google.com>
Reported-by: Marti Raudsepp <marti@juffo.org>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Whether to continue removing extents or not is decided by the return
value of function ext4_ext_more_to_rm() which checks 2 conditions:
a) if there are no more indexes to process.
b) if the number of entries are decreased in the header of "depth -1".
In case of hole punch, if the last block to be removed is not part of
the last extent index than this index will not be deleted, hence the
number of valid entries in the extent header of "depth - 1" will
remain as it is and ext4_ext_more_to_rm will return 0 although the
required blocks are not yet removed.
This patch fixes the above mentioned problem as instead of removing
the extents from the end of file, it starts removing the blocks from
the particular extent from which removing blocks is actually required
and continue backward until done.
Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
In this patch, ext4_ext_try_to_merge has been change to merge
an extent both left and right. So we need to update the comment
in here.
Signed-off-by: HaiboLiu <HaiboLiu6@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ext4 must make sure the transaction to be commited to the disk when
user opens a file with O_(D)SYNC flag and do a fallocate(2) call.
This problem had been reported by Christoph Hellwig in this thread:
http://www.spinics.net/lists/linux-btrfs/msg13621.html
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When truncating a file, we unmap pages from userspace first, as that's
usually more efficient than relying, page by page, on the fallback in
truncate_inode_page() - particularly if the file is mapped many times.
Do the same when punching a hole: 3.4 added truncate_pagecache_range()
to do the unmap and trunc, so use it in ext4_ext_punch_hole(), instead
of calling truncate_inode_pages_range() directly.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate and verify the checksum for each extent tree block. The
checksum is located in the space immediately after the last possible
ext4_extent in the block. The space is is typically the last 4-8
bytes in the block.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create a new BH_Verified flag to indicate that we've verified all the
data in a buffer_head for correctness. This allows us to bypass
expensive verification steps when they are not necessary without
missing them when they are.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes a scalability problem reported by Andi Kleen and Tim Chen;
they were quite secretive about the precise nature of their workload,
but they later admitted that it only showed up when they were using a
large sparse file, so the amount of data I/O that was needed was close
to zero. I'm not sure how realistic this is and it's only a
regression if you consider changes made since 2.6.39 to be a
"regression" vis-a-vis the policy regarding post-merge window bug
fixes, but Linus agreed it was worth fixing, so I'm including it in
this pull request.
This also fixes the journalled quota mount options, which I
accidentally broke while I was cleaning up the mount option handling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=jb3f
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 regression fixes from Ted Ts'o:
"This fixes a scalability problem reported by Andi Kleen and Tim Chen;
they were quite secretive about the precise nature of their workload,
but they later admitted that it only showed up when they were using a
large sparse file, so the amount of data I/O that was needed was close
to zero.
I'm not sure how realistic this is and it's only a regression if you
consider changes made since 2.6.39 to be a "regression" vis-a-vis the
policy regarding post-merge window bug fixes, but Linus agreed it was
worth fixing, so I'm including it in this pull request.
This also fixes the journalled quota mount options, which I
accidentally broke while I was cleaning up the mount option handling."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix handling of journalled quota options
ext4: address scalability issue by removing extent cache statistics
Andi Kleen and Tim Chen have reported that under certain circumstances
the extent cache statistics are causing scalability problems due to
cache line bounces.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
->ee_len is __le16, so assigning cpu_to_le32() to it is going to do
Bad Things(tm) on big-endian hosts...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We are going to remove the EOFBLOCKS_FL flag in the future, so this is
the first part of the removal. We can not remove it entirely just now,
since the e2fsck is still checking for it and it might cause headache to
some people. Instead, remove the restrictive checks now and the rest
later, when the new e2fsck code is out and common enough.
This is also needed because punch hole already breaks the EOFBLOCKS_FL
semantics, so it might cause the some troubles. So simply remove it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The error message produced by the ext4_ext_rm_leaf() when we are
removing blocks which accidentally ends up inside the existing extent,
is not very helpful, because we would like to also know which extent did
we collide with.
This commit changes the error message to get us also the information
about the extent we are colliding with.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since the commit 'Rewrite punch hole to use ext4_ext_remove_space()'
reworked the punch hole implementation to use ext4_ext_remove_space()
instead of ext4_ext_map_blocks(), we can remove the code which is no
longer needed from the ext4_ext_map_blocks().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit rewrites ext4 punch hole implementation to use
ext4_ext_remove_space() instead of its home gown way of doing this via
ext4_ext_map_blocks(). There are several reasons for changing this.
Firstly it is quite non obvious that punching hole needs to
ext4_ext_map_blocks() to punch a hole, especially given that this
function should map blocks, not unmap it. It also required a lot of new
code in ext4_ext_map_blocks().
Secondly the design of it is not very effective. The reason is that we
are trying to punch out blocks in ext4_ext_punch_hole() in opposite
direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf()
to iterate through the whole tree from the end to the start to find the
requested extent for every extent we are going to punch out.
And finally the current implementation does not use the existing code,
but bring a lot of new code, which is IMO unnecessary since there
already is some infrastructure we can use. Specifically
ext4_ext_remove_space().
This commit changes ext4_ext_remove_space() to accept 'end' parameter so
we can not only truncate to the end of file, but also remove the space
in the middle of the file (punch a hole). Moreover, because the last
block to punch out, might be in the middle of the extent, we have to
split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either
remove the whole fist part of split extent, or change its size.
ext4_ext_remove_space() is then used to actually remove the space
(extents) from within the hole, instead of ext4_ext_map_blocks().
Note that this also fix the issue with punch hole, where we would forget
to remove empty index blocks from the extent tree, resulting in double
free block error and file system corruption. This is simply because we
now use different code path, where this problem does not exist.
This has been tested with fsx running for several days and xfstests,
plus xfstest #251 with '-o discard' run on the loop image (which
converts discard requestes into punch hole to the backing file). All of
it on 1K and 4K file system block size.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Explicitly test for an extent whose length is zero, and flag that as a
corrupted extent.
This avoids a kernel BUG_ON assertion failure.
Tested: Without this patch, the file system image found in
tests/f_ext_zero_len/image.gz in the latest e2fsprogs sources causes a
kernel panic. With this patch, an ext4 file system error is noted
instead, and the file system is marked as being corrupted.
https://bugzilla.kernel.org/show_bug.cgi?id=42859
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2/3/4: delete unneeded includes of module.h
ext{3,4}: Fix potential race when setversion ioctl updates inode
udf: Mark LVID buffer as uptodate before marking it dirty
ext3: Don't warn from writepage when readonly inode is spotted after error
jbd: Remove j_barrier mutex
reiserfs: Force inode evictions before umount to avoid crash
reiserfs: Fix quota mount option parsing
udf: Treat symlink component of type 2 as /
udf: Fix deadlock when converting file from in-ICB one to normal one
udf: Cleanup calling convention of inode_getblk()
ext2: Fix error handling on inode bitmap corruption
ext3: Fix error handling on inode bitmap corruption
ext3: replace ll_rw_block with other functions
ext3: NULL dereference in ext3_evict_inode()
jbd: clear revoked flag on buffers before a new transaction started
ext3: call ext3_mark_recovery_complete() when recovery is really needed
Delete any instances of include module.h that were not strictly
required. In the case of ext2, the declaration of MODULE_LICENSE
etc. were in inode.c but the module_init/exit were in super.c, so
relocate the MODULE_LICENCE/AUTHOR block to super.c which makes it
consistent with ext3 and ext4 at the same time.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Fix ext4_debug format in ext4_ext_handle_uninitialized_extents() and
ext4_end_io_dio().
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We found performance regression when using bigalloc with "nodelalloc"
(1MB cluster size):
1. mke2fs -C 1048576 -O ^has_journal,bigalloc /dev/sda
2. mount -o nodelalloc /dev/sda /test/
3. time dd if=/dev/zero of=/test/io bs=1048576 count=1024
The "dd" will cost about 2 seconds to finish, but if we mke2fs without
"bigalloc", "dd" will only cost less than 1 second.
The reason is: when using ext4 with "nodelalloc", it will call
ext4_find_delalloc_cluster() nearly everytime it call
ext4_ext_map_blocks(), and ext4_find_delalloc_range() will also scan
all pages in cluster because no buffer is "delayed". A cluster has
256 pages (1MB cluster), so it will scan 256 * 256k pags when creating
a 1G file. That severely hurts the performance.
Therefore, we return immediately from ext4_find_delalloc_range() in
nodelalloc mode, since by definition there can't be any delalloc
pages.
Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In get_implied_cluster_alloc(), rr_cluster_end was being
defined and set, but was never used. Removed this.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a file is fallocated on a hole, map->m_lblk + map->m_len may be greater
than ee_block + ee_len.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Commit 1939dd84b3 ("ext4: cleanup ext4_ext_grow_indepth code") added a
reference to ext4_extent_header.eh_depth, but forget to pass the value
read through le16_to_cpu. The result is a crash on big-endian
machines, such as this crash on a POWER7 server:
attempt to access beyond end of device
sda8: rw=0, want=776392648163376, limit=168558560
Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6bcb
Faulting instruction address: 0xc0000000001f5f38
cpu 0x14: Vector: 300 (Data Access) at [c000001bd1aaecf0]
pc: c0000000001f5f38: .__brelse+0x18/0x60
lr: c0000000002e07a4: .ext4_ext_drop_refs+0x44/0x80
sp: c000001bd1aaef70
msr: 9000000000009032
dar: 6b6b6b6b6b6b6bcb
dsisr: 40000000
current = 0xc000001bd15b8010
paca = 0xc00000000ffe4600
pid = 19911, comm = flush-8:0
enter ? for help
[c000001bd1aaeff0] c0000000002e07a4 .ext4_ext_drop_refs+0x44/0x80
[c000001bd1aaf090] c0000000002e0c58 .ext4_ext_find_extent+0x408/0x4c0
[c000001bd1aaf180] c0000000002e145c .ext4_ext_insert_extent+0x2bc/0x14c0
[c000001bd1aaf2c0] c0000000002e3fb8 .ext4_ext_map_blocks+0x628/0x1710
[c000001bd1aaf420] c0000000002b2974 .ext4_map_blocks+0x224/0x310
[c000001bd1aaf4d0] c0000000002b7f2c .mpage_da_map_and_submit+0xbc/0x490
[c000001bd1aaf5a0] c0000000002b8688 .write_cache_pages_da+0x2c8/0x430
[c000001bd1aaf720] c0000000002b8b28 .ext4_da_writepages+0x338/0x670
[c000001bd1aaf8d0] c000000000157280 .do_writepages+0x40/0x90
[c000001bd1aaf940] c0000000001ea830 .writeback_single_inode+0xe0/0x530
[c000001bd1aafa00] c0000000001eb680 .writeback_sb_inodes+0x210/0x300
[c000001bd1aafb20] c0000000001ebc84 .__writeback_inodes_wb+0xd4/0x140
[c000001bd1aafbe0] c0000000001ebfec .wb_writeback+0x2fc/0x3e0
[c000001bd1aafce0] c0000000001ed770 .wb_do_writeback+0x2f0/0x300
[c000001bd1aafdf0] c0000000001ed848 .bdi_writeback_thread+0xc8/0x340
[c000001bd1aafed0] c0000000000c5494 .kthread+0xb4/0xc0
[c000001bd1aaff90] c000000000021f48 .kernel_thread+0x54/0x70
This is due to getting ext_depth(inode) == 0x101 and therefore running
off the end of the path array in ext4_ext_drop_refs into following
unallocated structures.
This fixes it by adding the necessary le16_to_cpu.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The variable 'block' is removed by commit 750c9c47, so use the
replacement ex_ee_block instead.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch fixes a syntax error which omits a comma. Besides this,
logical block number is unsigend 32 bits, so printk should use %u
instead %d.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If an fallocate request fits in EXT_UNINIT_MAX_LEN, then set the
EXT4_GET_BLOCKS_NO_NORMALIZE flag. For larger fallocate requests,
let mballoc.c normalize the request.
This fixes a problem where large requests were being split into
non-contiguous extents due to commit 556b27abf7: ext4: do not
normalize block requests from fallocate.
Testing:
*) Checked that 8.x MB falloc'ed files are still laid down next to
each other (contiguously).
*) Checked that the maximum size extent (127.9MB) is allocated as 1
extent.
*) Checked that a 1GB file is somewhat contiguous (often 5-6
non-contiguous extents now).
*) Checked that a 120MB file can still be falloc'ed even if there are
no single extents large enough to hold it.
Signed-off-by: Greg Harm <gharm@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten
should be done simultaneously since ext4_end_io_nolock always clear
the flag and decrease the counter in the same time.
We have found some bugs that the flag is set while leaving
i_aiodio_unwritten unchanged(commit 32c80b32c0). So this patch just tries
to create a helper function to wrap them to avoid any future bug.
The idea is inspired by Eric.
Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When ext4_ext_map_blocks() is called by punch_hole, trace should
trace blocks punched out.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_ext_insert_extent() (respectively ext4_ext_insert_index())
was using EXT_MAX_EXTENT() (resp. EXT_MAX_INDEX()) to determine
how many entries needed to be moved beyond the insertion point.
In practice this means that (320 - I) * 24 bytes were memmove()'d
when I is the insertion point, rather than (#entries - I) * 24 bytes.
This patch uses EXT_LAST_EXTENT() (resp. EXT_LAST_INDEX()) instead
to only move existing entries. The code flow is also simplified
slightly to highlight similarities and reduce code duplication in
the insertion logic.
This patch reduces system CPU consumption by over 25% on a 4kB
synchronous append DIO write workload when used with the
pre-2.6.39 x86_64 memmove() implementation. With the much faster
2.6.39 memmove() implementation we still see a decrease in
system CPU usage between 2% and 7%.
Note that the ext_debug() output changes with this patch, splitting
some log information between entries. Users of the ext_debug() output
should note that the "move %d" units changed from reporting the number
of bytes moved to reporting the number of entries moved.
Signed-off-by: Eric Gouriou <egouriou@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch introduces a fast path in ext4_ext_convert_to_initialized()
for the case when the conversion can be performed by transferring
the newly initialized blocks from the uninitialized extent into
an adjacent initialized extent. Doing so removes the expensive
invocations of memmove() which occur during extent insertion and
the subsequent merge.
In practice this should be the common case for clients performing
append writes into files pre-allocated via
fallocate(FALLOC_FL_KEEP_SIZE). In such a workload performed via
direct IO and when using a suboptimal implementation of memmove()
(x86_64 prior to the 2.6.39 rewrite), this patch reduces kernel CPU
consumption by 32%.
Two new trace points are added to ext4_ext_convert_to_initialized()
to offer visibility into its operations. No exit trace point has
been added due to the multiplicity of return points. This can be
revisited once the upstream cleanup is backported.
Signed-off-by: Eric Gouriou <egouriou@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we want to convert the unitialized extent in direct write, we can
either do it in ext4_end_io_nolock(AIO case) or in
ext4_ext_direct_IO(non AIO case) and EXT4_I(inode)->cur_aio_dio is a
guard for ext4_ext_map_blocks to find the right case. In e9e3bcecf,
we mistakenly change it by:
- if (io)
+ if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
io->flag = EXT4_IO_END_UNWRITTEN;
- else
+ atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
+ } else
ext4_set_inode_state(inode,
EXT4_STATE_DIO_UNWRITTEN);
So now if we map 2 blocks, and the first one set the
EXT_IO_END_UNWRITTEN, the 2nd mapping will set inode state because of
the check for the flag. This is wrong.
Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_ext_next_allocated_block(), the path[depth] might
have a p_ext that is NULL -- see ext4_ext_binsearch(). In
such a case, dereferencing it will crash the machine.
This patch checks for p_ext == NULL in
ext4_ext_next_allocated_block() before dereferencinging it.
Tested using a hand-crafted an inode with eh_entries == 0 in
an extent block, verified that running FIEMAP on it crashes
without this patch, works fine with it.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When allocated is unsigned it breaks the error handling at the end
of the function when we call:
allocated = ext4_split_extent(...);
if (allocated < 0)
err = allocated;
I've made it a signed int instead of unsigned.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
EOFBLOCK_FL should be updated if called w/o FALLOCATE_FL_KEEP_SIZE
Currently it happens only if new extent was allocated.
TESTCASE:
fallocate test_file -n -l4096
fallocate test_file -l4096
Last fallocate cmd has updated size, but keept EOFBLOCK_FL set. And
fsck will complain about that.
Also remove ping pong in ext4_fallocate() in case of new extents,
where ext4_ext_map_blocks() clear EOFBLOCKS bit, and later
ext4_falloc_update_inode() restore it again.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- Both callers(truncate and punch_hole) already aligned left end point
so we no longer need split logic here.
- Remove dead duplicated code.
- Call ext4_ext_dirty only after we have updated eh_entries, otherwise
we'll loose entries update. Regression caused by d583fb87a3
266'th testcase in xfstests (http://patchwork.ozlabs.org/patch/120872)
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently code make an impression what grow procedure is very complicated
and some mythical paths, blocks are involved. But in fact grow in depth
it relatively simple procedure:
1) Just create new meta block and copy root data to that block.
2) Convert root from extent to index if old depth == 0
3) Update root block pointer
This patch does:
- Reorganize code to make it more self explanatory
- Do not pass path parameter to new_meta_block() in order to
provoke allocation from inode's group because top-level block
should site closer to it's inode, but not to leaf data block.
[ This happens anyway, due to logic in mballoc; we should drop
the path parameter from new_meta_block() entirely. -- tytso ]
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The third parameter to ext4_free_blocks is a struct buffer_head *. This
parameter should be NULL not 0.
This quiets the sparse noise:
warning: Using plain integer as NULL pointer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a sanity check to make sure ix hasn't gone beyond the valid bounds
of the extent block.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_extent_idx.e_block is __le32, so use le32_to_cpu() in
ext4_ext_search_left().
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The comment describing what ext4_ext_search_right() does is incorrect.
We return 0 in *phys when *logical is the 'largest' allocated block,
not smallest.
Fix a few other typos while we're at it.
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Currently, there exists a race between delayed allocated writes and
the writeback when bigalloc feature is in use. The race was because we
wanted to determine what blocks in a cluster are under delayed
allocation and we were using buffer_delayed(bh) check for it. But, the
writeback codepath clears this bit without any synchronization which
resulted in a race and an ext4 warning similar to:
EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0
reserved data blocks
The race existed in two places.
(1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from
writeback code path.
(2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where
buffer_delayed(bh) is set.
To fix (1), this patch introduces a new buffer_head state bit -
BH_Da_Mapped. This bit is set under the protection of
EXT4_I(inode)->i_data_sem when we have actually mapped the delayed
allocated blocks during the writeout time. We can now reliably check
for this bit inside ext4_find_delalloc_range() to determine whether
the reservation for the blocks have already been claimed or not.
To fix (2), it was necessary to set buffer_delay(bh) under the
protection of i_data_sem. So, I extracted the very beginning of
ext4_map_blocks into a new function - ext4_da_map_blocks() - and
performed the required setting of bh_delay bit and the quota
reservation under the protection of i_data_sem. These two fixes makes
the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent,
thus removing the race.
Tested: I was able to reproduce the problem by running 'dd' and
'fsync' in parallel. Also, xfstests sometimes used to reproduce this
race. After the fix both my test and xfstests were successful and no
race (warning message) was observed.
Google-Bug-Id: 4997027
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds some tracepoints in ext4/extents.c and updates a tracepoint in
ext4/inode.c.
Tested: Built and ran the kernel and verified that these tracepoints work.
Also ran xfstests.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With bigalloc changes, the i_blocks value was not correctly set (it was still
set to number of blocks being used, but in case of bigalloc, we want i_blocks
to represent the number of clusters being used). Since the quota subsystem sets
the i_blocks value, this patch fixes the quota accounting and makes sure that
the i_blocks value is set correctly.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we are truncating (as opposed unlinking) a file, we need to worry
about partial truncates of a file, especially in the light of sparse
files. The changes here make sure that arbitrary truncates of sparse
files works correctly. Yeah, it's messy.
Note that these functions will need to be revisted when the punch
ioctl is integrated --- in fact this commit will probably have merge
conflicts with the punch changes which Allison Henders and the IBM LTC
have been working on. I will need to fix this up when either patch
hits mainline.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we need to allocate a new block in ext4_ext_map_blocks(), the
function needs to see if the cluster has already been allocated.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
While running extended fsx tests to verify the first
two patches, a similar bug was also found in the
truncate operation.
This bug happens because the truncate routine only zeros
the unblock aligned portion of the last page. This means
that the block aligned portions of the page appearing after
i_size are left unzeroed, and the buffer heads still mapped.
This bug is corrected by using ext4_discard_partial_page_buffers
in the truncate routine to zero the partial page and unmap
the buffer headers.
Signed-off-by: Allison Henderson <achender@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
