- Missing device ID for ACPI enumeration of PNP devices that we
overlooked during the recent rework of that code from Zhang Rui.
- Fix for a problem introduced during the 3.14 cycle in the ACPI
device resources management code and causing it to reject all
resources of length 0 although some of them are actually valid
which affects serial ports detection on a number of systems.
From Andy Whitcroft.
- intel_pstate fix for a boot problem on some BayTrail-based
systems introduced by a previous fix related to that platform
during the 3.13 cycle from Dirk Brandewie.
- Revert of a 3.13 commit that removed the ACPI AC /proc interface
which turns out to be still needed by some old utilities (kpowersave
from kde 3.5.10 in particular) from Lan Tianyu.
- cpufreq build fix for the davinci ARM platform from Prabhakar Lad
(the breakage was introduced during the 3.10 cycle).
- ACPI-related i915 fix preventing firmware on some Thinkpad laptops
from setting backlight levels incorrectly during AC plug/unplug.
From Aaron Lu.
- Fixes for two nasty race conditions in the ACPI embedded controller
driver that may be responsible for a number of past bug reports
related to the EC from Lv Zhang and a fix for two memory leaks in
error code paths in that driver from Colin Ian King.
- Fixes for a couple of corner-case issues in the intel_pstate
driver (all candidates for -stable) from Dirk Brandewie and
Vincent Minet.
- Fixes for two corner-case issues in the ACPI battery driver
from Josef Gajdusek and Lan Tianyu.
- Two new ACPI video blacklist entries for Acer TravelMate B113
and Dell Inspiron 5737 from Edward Lin and Martin Kepplinger.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=1zjY
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These are a few regression fixes for ACPI device enumeration and
resources management, intel_pstate and cpufreq, a revert of an ACPI
commit removing user space interfaces in /proc that we incorrectly
thought were not used any more, fixes for some long-standing
concurrency issues in the ACPI EC driver, two ACPI battery driver
fixes, stable-candidate fixes for intel_pstate, an ACPI-related fix
for i915 and two new ACPI video blacklist entries for Win8-oriented
BIOSes.
Specifics:
- Missing device ID for ACPI enumeration of PNP devices that we
overlooked during the recent rework of that code from Zhang Rui.
- Fix for a problem introduced during the 3.14 cycle in the ACPI
device resources management code and causing it to reject all
resources of length 0 although some of them are actually valid
which affects serial ports detection on a number of systems. From
Andy Whitcroft.
- intel_pstate fix for a boot problem on some BayTrail-based systems
introduced by a previous fix related to that platform during the
3.13 cycle from Dirk Brandewie.
- Revert of a 3.13 commit that removed the ACPI AC /proc interface
which turns out to be still needed by some old utilities
(kpowersave from kde 3.5.10 in particular) from Lan Tianyu.
- cpufreq build fix for the davinci ARM platform from Prabhakar Lad
(the breakage was introduced during the 3.10 cycle).
- ACPI-related i915 fix preventing firmware on some Thinkpad laptops
from setting backlight levels incorrectly during AC plug/unplug.
From Aaron Lu.
- Fixes for two nasty race conditions in the ACPI embedded controller
driver that may be responsible for a number of past bug reports
related to the EC from Lv Zhang and a fix for two memory leaks in
error code paths in that driver from Colin Ian King.
- Fixes for a couple of corner-case issues in the intel_pstate driver
(all candidates for -stable) from Dirk Brandewie and Vincent Minet.
- Fixes for two corner-case issues in the ACPI battery driver from
Josef Gajdusek and Lan Tianyu.
- Two new ACPI video blacklist entries for Acer TravelMate B113 and
Dell Inspiron 5737 from Edward Lin and Martin Kepplinger"
* tag 'pm+acpi-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PNP: add soc_button_array device ID to PNP IDs list
cpufreq: Makefile: fix compilation for davinci platform
ACPI / video: Add Acer TravelMate B113 to native backlight blacklist
ACPI / video: Add Dell Inspiron 5737 to the blacklist
ACPI / i915: ignore firmware requests for backlight change
ACPI / battery: fix wrong value of capacity_now reported when fully charged
ACPI / resources: only reject zero length resources based at address zero
ACPI / battery: Retry to get battery information if failed during probing
ACPI / EC: Free saved_ec on error exit path
ACPI / EC: Add detailed fields debugging support of EC_SC(R).
ACPI / EC: Update revision due to recent changes
ACPI / EC: Fix race condition in ec_transaction_completed()
ACPI / EC: Remove duplicated ec_wait_ibf0() waiter
ACPI / EC: Add asynchronous command byte write support
ACPI / EC: Avoid race condition related to advance_transaction()
intel_pstate: Set CPU number before accessing MSRs
intel_pstate: Update documentation of {max,min}_perf_pct sysfs files
intel_pstate: don't touch turbo bit if turbo disabled or unavailable.
intel_pstate: Fix setting VID
Revert "ACPI / AC: Remove AC's proc directory."
* pm-cpufreq:
cpufreq: Makefile: fix compilation for davinci platform
intel_pstate: Set CPU number before accessing MSRs
intel_pstate: Update documentation of {max,min}_perf_pct sysfs files
intel_pstate: don't touch turbo bit if turbo disabled or unavailable.
intel_pstate: Fix setting VID
* acpi-resources:
ACPI / resources: only reject zero length resources based at address zero
* acpi-ac:
Revert "ACPI / AC: Remove AC's proc directory."
* acpi-scan:
ACPI / PNP: add soc_button_array device ID to PNP IDs list
* acpi-battery:
ACPI / battery: fix wrong value of capacity_now reported when fully charged
ACPI / battery: Retry to get battery information if failed during probing
Pull libata fixes from Tejun Heo:
"Nothing too interesting. All fixes are ahci_platform related"
* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
libahci: export ahci_qc_issue() and ahci_start_fix_rx()
ata: ahci_imx: warn when disabling ahci link
ahci: disable ncq feature for hisilicon sata
ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]
libahci_platform: Fail when PHY required but PHY support disabled
Pull cgroup fixes from Tejun Heo:
"Mostly fixes for the fallouts from the recent cgroup core changes.
The decoupled nature of cgroup dynamic hierarchy management
(hierarchies are created dynamically on mount but may or may not be
reused once unmounted depending on remaining usages) led to more
ugliness being added to kernfs.
Hopefully, this is the last of it"
* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: break kernfs active protection in cpuset_write_resmask()
cgroup: fix a race between cgroup_mount() and cgroup_kill_sb()
kernfs: introduce kernfs_pin_sb()
cgroup: fix mount failure in a corner case
cpuset,mempolicy: fix sleeping function called from invalid context
cgroup: fix broken css_has_online_children()
Pull workqueue fixes from Tejun Heo:
"Two workqueue fixes. Both are one liners. One fixes missing uevent
for workqueue files on sysfs. The other one fixes missing zeroing of
NUMA cpu masks which can lead to oopses among other things"
* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: zero cpumask of wq_numa_possible_cpumask on init
workqueue: fix dev_set_uevent_suppress() imbalance
Pull percpu fix from Tejun Heo:
"One patch to fix a typo in percpu section name. Given how long the
bug has been there and that there hasn't been any report of brekage,
it's unlikely to cause actual issues"
* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
core: fix typo in percpu read_mostly section
Pull i2c build fix and cleanup from Wolfram Sang:
"One buildfix for the i2c subsystem. While here, I decided to add the
header cleanup as well"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sun6i-p2wi: Remove duplicate inclusion of module.h
i2c: mux: pca954x: fix dependencies
Pull crypto fixes from Herbert Xu:
"This push fixes an error in sha512_ssse3 that leads to incorrect
output as well as a memory leak in caam_jr when the module is
unloaded"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix memleak in caam_jr module
crypto: sha512_ssse3 - fix byte count to bit count conversion
This patch fixes a memory leak that appears when caam_jr module is unloaded.
Cc: <stable@vger.kernel.org> # 3.13+
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
o fix normal and recovery path for fallocated regions
o fix error case mishandling
o recover renamed fsync inodes correctly
o fix to get out of infinite loops in balance_dirty_pages
o fix kernel NULL pointer error
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pwxz
-----END PGP SIGNATURE-----
Merge tag 'f2fs-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs bugfixes from Jaegeuk Kim:
"This includes a couple of bug fixes found by xfstests. In addition,
one critical bug was reported by Brian Chadwick, which is falling into
the infinite loop in balance_dirty_pages. And it turned out due to
the IO merging policy in f2fs, which was newly merged in 3.16.
- fix normal and recovery path for fallocated regions
- fix error case mishandling
- recover renamed fsync inodes correctly
- fix to get out of infinite loops in balance_dirty_pages
- fix kernel NULL pointer error"
* tag 'f2fs-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: avoid to access NULL pointer in issue_flush_thread
f2fs: check bdi->dirty_exceeded when trying to skip data writes
f2fs: do checkpoint for the renamed inode
f2fs: release new entry page correctly in error path of f2fs_rename
f2fs: fix error path in init_inode_metadata
f2fs: check lower bound nid value in check_nid_range
f2fs: remove unused variables in f2fs_sm_info
f2fs: fix not to allocate unnecessary blocks during fallocate
f2fs: recover fallocated data and its i_size together
f2fs: fix to report newly allocate region as extent
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=75861
Denis 2014-05-10 11:28:59 UTC reported:
"F2FS-fs (mmcblk0p28): mounting..
Unable to handle kernel NULL pointer dereference at virtual address 00000018
...
[<c0a2f678>] (_raw_spin_lock+0x3c/0x70) from [<c03a0330>] (issue_flush_thread+0x50/0x17c)
[<c03a0330>] (issue_flush_thread+0x50/0x17c) from [<c01b4064>] (kthread+0x98/0xa4)
[<c01b4064>] (kthread+0x98/0xa4) from [<c0108060>] (kernel_thread_exit+0x0/0x8)"
This patch assign cmd_control_info in sm_info before issue_flush_thread is being
created, so this make sure that issue flush thread will have no chance to access
invalid info in fcc.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we don't check the current backing device status, balance_dirty_pages can
fall into infinite pausing routine.
This can be occurred when a lot of directories make a small number of dirty
dentry pages including files.
Reported-by: Brian Chadwick <brianchad@westnet.com.au>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If an inode is renamed, it should be registered as file_lost_pino to conduct
checkpoint at f2fs_sync_file.
Otherwise, the inode cannot be recovered due to no dent_mark in the following
scenario.
Note that, this scenario is from xfstests/322.
1. create "a"
2. fsync "a"
3. rename "a" to "b"
4. fsync "b"
5. Sudden power-cut
After recovery is done, "b" should be seen.
However, the result shows "a", since the recovery procedure does not enter
recover_dentry due to no dent_mark.
The reason is like below.
- The nid of "a" is checkpointed during #2, f2fs_sync_file.
- The inode page for "b" produced by #3 is written without dent_mark by
sync_node_pages.
So, this patch fixes this bug by assinging file_lost_pino to the "a"'s inode.
If the pino is lost, f2fs_sync_file conducts checkpoint, and then recovers
the latest pino and its dentry information for further recovery.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch correct releasing code of new_page to avoid BUG_ON in error patch of
f2fs_rename.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we fail in this path:
->init_inode_metadata
->make_empty_dir
->get_new_data_page
->grab_cache_page return -ENOMEM
We will bug on in error path of init_inode_metadata when call remove_inode_page
because i_block = 2 (one inode block will be released later & one dentry block).
We should release the dentry block in init_inode_metadata to avoid this BUG_ON,
and avoid leak of dentry block resource, because we never have second chance to
release that block in ->evict_inode as in upper error path we make this inode
'bad'.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add lower bound verification for nid in check_nid_range, so nids
reserved like 0, node, meta passed by caller could be checked there.
And then check_nid_range could be used in f2fs_nfs_get_inode for simplifying
code.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The soc_button_array PNP driver was introduced in 3.15.
But in commit eec15edbb0 (ACPI / PNP: use device ID list for
PNPACPI device enumeration), when reworking the PNPACPI device
enumeration, we missed the soc_button_array device ID.
This results in a regression in 3.16-rc1 that soc_button_array
pnp device fails to be enumerated.
Fix the problem by adding soc_button_array device ID into the
acpi_pnp scan handler's ID list.
Fixes: eec15edbb0 (ACPI / PNP: use device ID list for PNPACPI device enumeration)
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commtit 8a7b1227e3 (cpufreq: davinci: move cpufreq driver to
drivers/cpufreq) this added dependancy only for CONFIG_ARCH_DAVINCI_DA850
where as davinci_cpufreq_init() call is used by all davinci platform.
This patch fixes following build error:
arch/arm/mach-davinci/built-in.o: In function `davinci_init_late':
:(.init.text+0x928): undefined reference to `davinci_cpufreq_init'
make: *** [vmlinux] Error 1
Fixes: 8a7b1227e3 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq)
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Nothing major, but potentially annoying and worthwhile to fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=otbz
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix a number of zero-day bugs, mostly found with module test scripts.
Nothing major, but potentially annoying and worthwhile to fix"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (adc128d818) Drop write support on inX_input attributes
hwmon: (emc2103) Clamp limits instead of bailing out
hwmon: (adm1031) Fix writes to limit registers
hwmon: (adm1021) Fix cache problem when writing temperature limits
hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div
hwmon: (amc6821) Fix permissions for temp2_input
hwmon: (ntc_thermistor) Correct information printed during probe
This patch fixes the dma state machine lockup due to the processing
of IDENTIFY DEVICE PIO mode command. The X-Gene AHCI controller
has an errata in which it cannot clear the BSY bit after the PIO setup
FIS. The dma state machine enters CMFatalErrorUpdate state and locks
up. This patch also removes the dma restart workaround from the read_id
function as the read_id function is only called by libata layer for
ATA_INTERNAL commands. But for some cases eg: PORT MULTIPLIER
and udev, the framework will enumerate using SCSI commands and it will
not call read_id function.
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The subsequent patch will make use of them.
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix backlight control for Acer TravelMate B113 Laptop by adding
it to the video_dmi_table.
A workaround before that was to use acpi_osi=Linux or
acpi_backlight=vendor on boot but even then, only the function-
keys worked.
With this change there is no need for boot parameters and DE's
controls work as well.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With win8 capabiltiy, the ACPI backlight control is broken.
The system also loses backlight setting when resuming from S3.
Add this model to the the ACPI video detect blacklist to make backlight
functionality work.
Although backlight functionality works via video.use_native_backlight=1,
this approach may be safer.
Signed-off-by: Edward Lin <yidi.lin@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some Thinkpad laptops' firmware will initiate a backlight level change
request through operation region on the events of AC plug/unplug, but
since we are not using firmware's interface to do the backlight setting
on these affected laptops, we do not want the firmware to use some
arbitrary value from its ASL variable to set the backlight level on
AC plug/unplug either.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=76491
Link: https://bugzilla.kernel.org/show_bug.cgi?id=77091
Reported-and-tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Reported-and-tested-by: Anton Gubarkov <anton.gubarkov@gmail.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It seems that some batteries (noticed on DELL JYPJ136) assume
capacity_now = design_capacity when fully charged. This causes
reported capacity to suddenly jump to >full_charge_capacity (and that
means capacity reported to userspace is >100% and incorrect)
values after 99%. This patch detects capacity_now > full_charge_capacity,
notifies userspace (unless it is the known bug where capacity_now ==
design_capacity) and trims the value to full_charge_capacity.
Signed-off-by: Josef Gajdusek <atx@atx.name>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull thermal fixes from Zhang Rui:
"Specifics:
- update Email address of Thermal subsystem maintainer Eduardo
Valentin.
- fix a problem that unloading thermal module results in kernel crash
because a non-exist device file is removed on thermal unload.
- fix a problem that critical trip point is set wrongly on latest
i.MX6 SOC and results in system critical shutdown.
- a couple of fixes to Tmon tool, of-thermal code and ti thermal
driver"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tmon: set umask to a reasonable value
tmon: Check log file for common secuirty issues
tools/thermal: tmon: fix compilation errors when building statically
thermal: ti-soc-thermal: ti-bandgap.c: Cleaning up wrong address is checked
Thermal: imx: correct critical trip temperature setting
thermal: Bind cooling devices with the correct arguments
thermal: Add braces around suspect code
thermal: hwmon: Make the check for critical temp valid consistent
MAINTAINERS: Update Eduardo Valentin's email address
Pull HID fixes from Jiri Kosina:
"A few tiny HID subsystem fixes for 3.16"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: use multi input quirk for 22b9:2968
HID: sensor-hub: fix potential memory leak
HID: usbhid: quirk for PM1610 and PM1640 Touchscreen.
HID: rmi: Protect PM-only functions by #ifdef CONFIG_PM
HID: sensor-hub: introduce Kconfig dependency on IOMEM
HID: sensor-hub: make dyn_callback_lock IRQ-safe
the errorpath in probe().
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ya5E
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two fixes for the pin control subsystem, both relating to the error
path in probe()
I'm a bit snowed under by mail but these have boiled in linux-next and
should propagate to you"
* tag 'pinctrl-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: berlin: fix an error code in berlin_pinctrl_probe()
pinctrl: sunxi: Fix potential null pointer dereference
The recently merged change (in v3.14-rc6) to ACPI resource detection
(below) causes all zero length ACPI resources to be elided from the
table:
commit b355cee88e
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Feb 27 11:37:15 2014 +0800
ACPI / resources: ignore invalid ACPI device resources
This change has caused a regression in (at least) serial port detection
for a number of machines (see LP#1313981 [1]). These seem to represent
their IO regions (presumably incorrectly) as a zero length region.
Reverting the above commit restores these serial devices.
Only elide zero length resources which lie at address 0.
Fixes: b355cee88e (ACPI / resources: ignore invalid ACPI device resources)
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Writes into input registers doesn't make sense, even more so since
the writes actually ended up writing into the maximum limit registers.
Drop it.
Cc: stable@vger.kernel.org
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
It is customary to clamp limits instead of bailing out with an error
if a configured limit is out of the range supported by the driver.
This simplifies limit configuration, since the user will not typically
know chip and/or driver specific limits.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When hot-adding and onlining CPU, kernel panic occurs, showing following
call trace.
BUG: unable to handle kernel paging request at 0000000000001d08
IP: [<ffffffff8114acfd>] __alloc_pages_nodemask+0x9d/0xb10
PGD 0
Oops: 0000 [#1] SMP
...
Call Trace:
[<ffffffff812b8745>] ? cpumask_next_and+0x35/0x50
[<ffffffff810a3283>] ? find_busiest_group+0x113/0x8f0
[<ffffffff81193bc9>] ? deactivate_slab+0x349/0x3c0
[<ffffffff811926f1>] new_slab+0x91/0x300
[<ffffffff815de95a>] __slab_alloc+0x2bb/0x482
[<ffffffff8105bc1c>] ? copy_process.part.25+0xfc/0x14c0
[<ffffffff810a3c78>] ? load_balance+0x218/0x890
[<ffffffff8101a679>] ? sched_clock+0x9/0x10
[<ffffffff81105ba9>] ? trace_clock_local+0x9/0x10
[<ffffffff81193d1c>] kmem_cache_alloc_node+0x8c/0x200
[<ffffffff8105bc1c>] copy_process.part.25+0xfc/0x14c0
[<ffffffff81114d0d>] ? trace_buffer_unlock_commit+0x4d/0x60
[<ffffffff81085a80>] ? kthread_create_on_node+0x140/0x140
[<ffffffff8105d0ec>] do_fork+0xbc/0x360
[<ffffffff8105d3b6>] kernel_thread+0x26/0x30
[<ffffffff81086652>] kthreadd+0x2c2/0x300
[<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60
[<ffffffff815f20ec>] ret_from_fork+0x7c/0xb0
[<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60
In my investigation, I found the root cause is wq_numa_possible_cpumask.
All entries of wq_numa_possible_cpumask is allocated by
alloc_cpumask_var_node(). And these entries are used without initializing.
So these entries have wrong value.
When hot-adding and onlining CPU, wq_update_unbound_numa() is called.
wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq()
calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set
as follow:
3592 /* if cpumask is contained inside a NUMA node, we belong to that node */
3593 if (wq_numa_enabled) {
3594 for_each_node(node) {
3595 if (cpumask_subset(pool->attrs->cpumask,
3596 wq_numa_possible_cpumask[node])) {
3597 pool->node = node;
3598 break;
3599 }
3600 }
3601 }
But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong
node is selected. As a result, kernel panic occurs.
By this patch, all entries of wq_numa_possible_cpumask are allocated by
zalloc_cpumask_var_node to initialize them. And the panic disappeared.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Fixes: bce903809a ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]")
Upper limit for write operations to temperature limit registers
was clamped to a fractional value. However, limit registers do
not support fractional values. As a result, upper limits of 127.5
degrees C or higher resulted in a rounded limit of 128 degrees C.
Since limit registers are signed, this was stored as -128 degrees C.
Clamp limits to (-55, +127) degrees C to solve the problem.
Value on writes to auto_temp[12]_min and auto_temp[12]_max were not
clamped at all, but masked. As a result, out-of-range writes resulted
in a more or less arbitrary limit. Clamp those attributes to (0, 127)
degrees C for more predictable results.
Cc: Axel Lin <axel.lin@ingics.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some machines (eg. Lenovo Z480) ECs are not stable during boot up
and causes battery driver fails to be loaded due to failure of getting
battery information from EC sometimes. After several retries, the
operation will work. This patch is to retry to get battery information 5
times if the first try fails.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=75581
Reported-and-tested-by: naszar <naszar@ya.ru>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Smatch detected two memory leaks on saved_ec:
drivers/acpi/ec.c:1070 acpi_ec_ecdt_probe() warn: possible
memory leak of 'saved_ec'
drivers/acpi/ec.c:1109 acpi_ec_ecdt_probe() warn: possible
memory leak of 'saved_ec'
Free saved_ec on these two error exit paths to stop the memory
leak. Note that saved_ec maybe null, but kfree on null is allowed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Developers really don't need to translate EC_SC(R) in mind as long as the
field details are decoded in the debugging message.
Tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The bug fixes and asynchronous improvements have been done to the EC driver
by the previous commits. This patch increases the revision to 2.2 to
indicate the behavior differences between the old and the new drivers. The
copyright/authorship notices are also updated.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a race condition in ec_transaction_completed().
When ec_transaction_completed() is called in the GPE handler, it could
return true because of (ec->curr == NULL). Then the wake_up() invocation
could complete the next command unexpectedly since there is no lock between
the 2 invocations. With the previous cleanup, the IBF=0 waiter race need
not be handled any more. It's now safe to return a flag from
advance_condition() to indicate the requirement of wakeup, the flag is
returned from a locked context.
The ec_transaction_completed() is now only invoked by the ec_poll() where
the ec->curr is ensured to be different from NULL.
After cleaning up, the EVT_SCI=1 check should be moved out of the wakeup
condition so that an EVT_SCI raised with (ec->curr == NULL) can trigger a
QR_SC command.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911
Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: Barton Xu <tank.xuhan@gmail.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After we've added the first command byte write into advance_transaction(),
the IBF=0 waiter is duplicated with the command completion waiter
implemented in the ec_poll() because:
If IBF=1 blocked the first command byte write invoked in the task
context ec_poll(), it would be kicked off upon IBF=0 interrupt or timed
out and retried again in the task context.
Remove this seperate and duplicate IBF=0 waiter. By doing so we can
reduce the overall number of times to access the EC_SC(R) status
register.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911
Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: Barton Xu <tank.xuhan@gmail.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the first command byte write into advance_transaction() so that all
EC register accesses that can affect the command processing state machine
can happen in this asynchronous state machine advancement function.
The advance_transaction() function then can be a complete implementation
of an asyncrhonous transaction for a single command so that:
1. The first command byte can be written in the interrupt context;
2. The command completion waiter can also be used to wait the first command
byte's timeout;
3. In BURST mode, the follow-up command bytes can be written in the
interrupt context directly, so that it doesn't need to return to the
task context. Returning to the task context reduces the throughput of
the BURST mode and in the worst cases where the system workload is very
high, this leads to the hardware driven automatic BURST mode exit.
In order not to increase memory consumption, convert 'done' into 'flags'
to contain multiple indications:
1. ACPI_EC_COMMAND_COMPLETE: converting from original 'done' condition,
indicating the completion of the command transaction.
2. ACPI_EC_COMMAND_POLL: indicating the availability of writing the first
command byte. A new command can utilize this flag to compete for the
right of accessing the underlying hardware. There is a follow-up bug
fix that has utilized this new flag.
The 2 flags are important because it also reflects a key concept of IO
programs' design used in the system softwares. Normally an IO program
running in the kernel should first be implemented in the asynchronous way.
And the 2 flags are the most common way to implement its synchronous
operations on top of the asynchronous operations:
1. POLL: This flag can be used to block until the asynchronous operations
can happen.
2. COMPLETE: This flag can be used to block until the asynchronous
operations have completed.
By constructing code cleanly in this way, many difficult problems can be
solved smoothly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911
Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: Barton Xu <tank.xuhan@gmail.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The advance_transaction() will be invoked from the IRQ context GPE handler
and the task context ec_poll(). The handling of this function is locked so
that the EC state machine are ensured to be advanced sequentially.
But there is a problem. Before invoking advance_transaction(), EC_SC(R) is
read. Then for advance_transaction(), there could be race condition around
the lock from both contexts. The first one reading the register could fail
this race and when it passes the stale register value to the state machine
advancement code, the hardware condition is totally different from when
the register is read. And the hardware accesses determined from the wrong
hardware status can break the EC state machine. And there could be cases
that the functionalities of the platform firmware are seriously affected.
For example:
1. When 2 EC_DATA(W) writes compete the IBF=0, the 2nd EC_DATA(W) write may
be invalid due to IBF=1 after the 1st EC_DATA(W) write. Then the
hardware will either refuse to respond a next EC_SC(W) write of the next
command or discard the current WR_EC command when it receives a EC_SC(W)
write of the next command.
2. When 1 EC_SC(W) write and 1 EC_DATA(W) write compete the IBF=0, the
EC_DATA(W) write may be invalid due to IBF=1 after the EC_SC(W) write.
The next EC_DATA(R) could never be responded by the hardware. This is
the root cause of the reported issue.
Fix this issue by moving the EC_SC(R) access into the lock so that we can
ensure that the state machine is advanced consistently.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911
Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: Barton Xu <tank.xuhan@gmail.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ensure that cpu->cpu is set before writing MSR_IA32_PERF_CTL during CPU
initialization. Otherwise only cpu0 has its P-state set and all other
cores are left with their values unchanged.
In most cases, this is not too serious because the P-states will be set
correctly when the timer function is run. But when the default governor
is set to performance, the per-CPU current_pstate stays the same forever
and no attempts are made to write the MSRs again.
Signed-off-by: Vincent Minet <vincent@vincent-minet.net>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update documentation to make the interpretation of the values clearer
Link: https://bugzilla.kernel.org/show_bug.cgi?id=64251
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If turbo is disabled in the BIOS bit 38 should be set in
MSR_IA32_MISC_ENABLE register per section 14.3.2.1 of the SDM Vol 3
document 325384-050US Feb 2014. If this bit is set do *not* attempt
to disable trubo via the MSR_IA32_PERF_CTL register. On some systems
trying to disable turbo via MSR_IA32_PERF_CTL will cause subsequent
writes to MSR_IA32_PERF_CTL not take affect, in fact reading
MSR_IA32_PERF_CTL will not show the IDA/Turbo DISENGAGE bit(32) as
set. A write of bit 32 to zero returns to normal operation.
Also deal with the case where the processor does not support
turbo and the BIOS does not report the fact in MSR_IA32_MISC_ENABLE
but does report the max and turbo P states as the same value.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=64251
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
