Fix some typos, adjust documentation and comments to current state of
knowledge and update coding style to be more uniform.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZJWf3H972hGgLK-8@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to ADI, changing PMON_CONFIG while the ADC is running can have
unexpected results. ADI recommends halting the ADC with PMON_CONTROL
before setting PMON_CONFIG and then resume after. Follow ADI
recommendation and disable ADC while PMON_CONFIG is updated.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230614163605.3688964-3-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to ADI, changing PMON_CONFIG while ADC is running can have
unexpected results. ADI recommends halting the ADC with PMON_CONTROL
before setting PMON_CONFIG and then resume after.
To prepare for this change, rename adm1275_read_pmon_config()
and adm1275_write_pmon_config() to adm1275_read_samples() and
adm1275_write_samples() to more accurately reflect the functionality
of the code. Introduce new function adm1275_write_pmon_config()
and use it for all code writing into the PMON_CONFIG register.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230614163605.3688964-2-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Take return logic on error out of if-else, eliminating
duplicated code in tt_togle_store() function.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20230617181159.32844-3-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
NCT6799D is mostly compatible to NCT6798D, with minor variations.
Note that NCT6798D and NCT6799D have a new means to select temperature
sources, and to report temperatures from those sources. This is not
currently implemented, meaning that most likely not all temperatures
are reported.
Cc: Sebastian Arnhold <sebastian.arnhold@posteo.de>
Cc: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Sebastian Arnhold <sebastian.arnhold@posteo.de>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://lore.kernel.org/r/20221228135744.281752-1-linux@roeck-us.net
OneXPlayer boards from the last generation (both for OneXPlayer and AOK
ZOE brands) have a toggle in the EC to switch the "Turbo/Silent" button
into a different keyboard event.
Add a means to use that "Turbo button takeover" function and expose it
to userspace in a custom sysfs `tt_toggle` attribute. It can be read to
take the current state. Write 1|0 to activate the function. The specific
keycode is dependent on the board but can be checked by running
`evtest` utility.
Newer BIOS on the OneXPlayer added this function aside from string changes.
Add a board enum to differentiate it from the old OneXplayer Mini AMD BIOS.
Currently known supported boards:
- AOK ZOE A1
- OneXPlayer Mini AMD (only newer BIOS version supported)
- OneXPlayer Mini Pro
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20230611143332.40590-2-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for medium repeatability.
Per datasheet:
The stated repeatability is 3 times the standard deviation (3σ)
of multiple consecutive measurements at the stated repeatability
and at constant ambient conditions. It is a measure for the noise
on the physical sensor output. Different measurement modes allow
for high/medium/low repeatability.
For the humidity sensor, repeatability is documented as
0.25% RH for low repeatability, 0.15% RH for medium repeatability,
and 0.10% RH for high repeatability. Support all three modes.
Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com>
Link: https://lore.kernel.org/r/DB4PR10MB6261A70CD0444248ADDCC3219258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM
[groeck: Added details to description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
New revisions of MAX16508 report MAX16508.xx or MAX16508y.xx as device ID,
but are functionally similar to MAX16508. Add support for those chip
variants.
Cc: Vlad Sytchenko <vsytch@google.com>
Cc: Steve Foreman <foremans@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use devm_hwmon_device_register_with_info to replace
hwmon_device_register_with_info in description of
devm_hwmon_device_unregister.
Signed-off-by: Yongsheng Yang <iyysheng@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230609075510.1305-1-iyysheng@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The tmp464 is only capable of performing single register read and write
operations which means it gains no advantage from using a rbtree register
cache, convert it to using the more modern maple tree register cache
instead. This should be more efficient.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-hwmon-maple-v1-5-8edacce86b28@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The tmp108 is only capable of performing single register read and write
operations which means it gains no advantage from using a rbtree register
cache, convert it to using the more modern maple tree register cache
instead. This should be more efficient.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-hwmon-maple-v1-4-8edacce86b28@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The tmp102 is only capable of performing single register read and write
operations which means it gains no advantage from using a rbtree register
cache, convert it to using the more modern maple tree register cache
instead. This should be more efficient.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-hwmon-maple-v1-3-8edacce86b28@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The lm95245 is only capable of performing single register read and write
operations which means it gains no advantage from using a rbtree register
cache, convert it to using the more modern maple tree register cache
instead. This should be more efficient.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-hwmon-maple-v1-2-8edacce86b28@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The lm75 is only capable of performing single register read and write
operations which means it gains no advantage from using a rbtree register
cache, convert it to using the more modern maple tree register cache
instead. This should be more efficient.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-hwmon-maple-v1-1-8edacce86b28@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Support for FAN_CTL ON/OFF is currently disabled only for IT8603E but
there are severl chips that don't support the configuration bits to turn
off fan control entirely. Generalise this support for any chip.
Add feature flag FEAT_FANCTL_ONOFF for chips that support configuration
bits for management of fan control off and assign all chips that support
the configuration.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230527094756.3464256-1-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch removes the error checking for debugfs_create_dir
in adm1266.c. This is because the debugfs_create_dir() does not
return NULL but an ERR_PTR after an error.
The DebugFS kernel API is developed in a way that the
caller can safely ignore the errors that occur during
the creation of DebugFS nodes.The debugfs Api handles
it gracefully. The check is unnecessary.
Link to the comment above debugfs_create_dir:
https://elixir.bootlin.com/linux/latest/source/fs/debugfs/inode.c#L565
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Link: https://lore.kernel.org/r/20230526163938.9903-1-osmtendev@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch removes the error checking for debugfs_create_dir
in ucd9000.c. This is because the debugfs_create_dir() does not
return NULL but an ERR_PTR after an error.
The DebugFS kernel API is developed in a way that the
caller can safely ignore the errors that occur during
the creation of DebugFS nodes.The debugfs Api handles
it gracefully. The check is unnecessary.
Link to the comment above debugfs_create_dir:
https://elixir.bootlin.com/linux/latest/source/fs/debugfs/inode.c#L565
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Link: https://lore.kernel.org/r/20230526154906.6370-1-osmtendev@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Checking for Kconfig symbols with #if is wrong:
drivers/hwmon/hp-wmi-sensors.c:1141:5: error: "CONFIG_DEBUG_FS" is not defined, evaluates to 0 [-Werror=undef]
This could be an #ifdef, but an IS_ENABLED() check is even better to
give the best compile coverage.
Fixes: 23902f98f8 ("hwmon: add HP WMI Sensors driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230601213216.3220550-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Hewlett-Packard (and some HP Compaq) business-class computers report
hardware monitoring information via WMI. This driver exposes that
information to hwmon.
Initial support is provided for temperature, fan speed, and intrusion
sensor types. Provisional support is provided for voltage and current
sensor types.
HP's WMI implementation permits many other types of numeric sensors.
Therefore, a debugfs interface is also provided to enumerate and
inspect all numeric sensors visible on the WMI side. This should
facilitate adding support for other sensor types in the future.
Tested on a HP Z420, a HP EliteOne 800 G1, and a HP Compaq Elite 8300
SFF.
Note that provisionally supported sensor types are untested and seem
to be rare-to-nonexistent in the wild, having been encountered
neither on test systems nor in ACPI dumps from the Linux Hardware
Database. They are included because their popularity in general makes
their presence on past or future HP systems plausible and because no
doubt exists as to how the sensors themselves would be represented in
WMI (alarm attributes will need to wait for hardware to be located).
A 2005 HP whitepaper gives the relevant sensor object MOF definition
and sensor value scaling calculation, and both this driver and the
official HP Performance Advisor utility comply with them (confirmed
in the latter case by reverse engineering).
Link: https://h20331.www2.hp.com/hpsub/downloads/cmi_whitepaper.pdf
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230522115645.509701-1-james@equiv.tech
[groeck: Set error return value for intrusion writes to -EINVAL.
Always accept writes of 0 even if there was no intrusion. ]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
We don't need to pass device structure to write_to_ec() so we remove
that from the function declaration.
The same is valid for pwm_enable() and pwm_disable() as we were passing
the pointer to hand it off to write_to_ec().
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20230525142652.41981-1-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
MAX31827 is a low-power temperature switch with I2C interface.
The device is a ±1°C accuracy from -40°C to +125°C
(12 bits) local temperature switch and sensor with I2C/SM-
Bus interface. The combination of small 6-bump wafer-lev-
el package (WLP) and high accuracy makes this temper-
ature sensor/switch ideal for a wide range of applications.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230524160131.14081-2-daniel.matyas@analog.com
[groeck: Improved define alignment, return -EINVAL after bad user input,
fixed up compatible statement]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
MAX31827 is a low-power temperature switch with I2C interface.
The device is a ±1°C accuracy from -40°C to +125°C
(12 bits) local temperature switch and sensor with I2C/SM-
Bus interface. The combination of small 6-bump wafer-lev-
el package (WLP) and high accuracy makes this temper-
ature sensor/switch ideal for a wide range of applications.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230524160131.14081-1-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for compatible AHT20 temperature/humidity sensor. The only
difference between the two is that AHT20 has additional crc8 byte.
It seems like AHT15 is also supported by the driver but it wasn't
verified and tested yet.
Tested on Beaglebone black rev C.
Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com>
Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
A newer BIOS version for the OneXPlayer Mini AMD modified vendor and
board name strings. Add those to the match table and set the same board
model as older OXP Mini AMD.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20230517183540.187383-1-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer Leakshield leak prevention system, which communicates
through a proprietary USB HID protocol. Implemented by Noah Bergbauer [1].
Two temperature sensors are exposed, along with pressure (current, min, max
and target), reservoir volume (total and filled), pump speed and flow. Pump
speed and flow values are user provided and allow the Leakshield to
optimize its operation. Writing them to the device is subject of future
patches.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/41
Originally-from: Noah Bergbauer <main@ehvag.de>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230520095447.509287-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Exit from the function immediately if the poll time hasn't yet expired.
Therefore the code after the check can be moved one tab to the left which
improves readability.
Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com>
Link: https://lore.kernel.org/r/20230511202633.299174-2-kiriyatsenko@gmail.com
[groeck: Dropped else after return]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix typos in the description of the return value section of the
functions. The word 'succesfull' is incorrect, it should be 'successful'.
Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com>
Link: https://lore.kernel.org/r/20230511202633.299174-1-kiriyatsenko@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 848ba0a2f2 ("hwmon: (core) Rename groups parameter in API to
extra_groups") renames the 'groups' parameter of
devm_hwmon_device_register_with_info() to 'extra_groups' in
hwmon-kernel-api.txt (later .rst) and hwmon.h, but this change was not
propagated to the function code itself in hwmon.c. Finish the job.
Note that hwmon_device_register_with_info() has the same
parameter, and the name of that parameter was changed in all
three files. Harmonizing the name between these related
functions also removes a potential source of confusion.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230507151051.1861929-1-james@equiv.tech
[groeck: Fixed up SHA reference in description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
beep_enable, inX_beep, currX_beep, fanX_beep, and tempX_beep
are standard attributes mentioned in the sysfs interface
specification but not implemented in the hwmon core. Since
these are not deprecated, implement them.
Adding beep_mask is not necessary, as it is deprecated and
the drivers already using it are manually defining it.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230507152216.1862653-1-james@equiv.tech
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Move the entry for the inspur-ipsps1 driver so that it no
longer appears in the hwmon docs TOC as a document relating
to the hwmon subsystem itself.
Signed-off-by: James Seo <james@equiv.tech>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230504075752.1320967-2-james@equiv.tech
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230505131718.1210071-1-u.kleine-koenig@pengutronix.de
[groeck: Added missing change in pmbus/acbel-fsg032.c]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some chips are known to only have 4 temperature sensors and there is no
requirement to test for more. Currently only the IT8622E fits this
category.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230430045032.1723288-1-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Instead of of_property_read_*() use the equivalent
device_property_read_*() API. This will allow these properties to be
used on DT unaware platforms. For DT aware platforms this will be a
noop.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230418233656.869055-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add feature and support for chips with only 4 fans.
Reorder macro definitions to bring all fan definitions together.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230429115205.1547251-2-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Only the temp sensors that I can verify are present. HWINFO in
Windows shows other accumulated data and statistics (time since
installed, total power used, etc) that I have not attempted to find.
Signed-off-by: Michael Carns <mike@carns.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20230426200345.65765-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for handhelds with same EC registers
- AYANEO 2
- AYANEO GEEK
All functionality tests succeed on AYANEO 2 by "pastaq" user on Discord
and AYANEO GEEK tested by "oneoc" Discord user.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20230426184420.99945-1-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The PMON_CONFIG register on ADM1272 is a 16 bit register. Writing a 8 bit
value into it clears the upper 8 bits of the register, resulting in
unexpected side effects. Fix by writing the 16 bit register value.
Also, it has been reported that temperature readings are sometimes widely
inaccurate, to the point where readings may result in device shutdown due
to errant overtemperature faults. Improve by enabling temperature sampling.
While at it, move the common code for ADM1272 and ADM1278 into a separate
function, and clarify in the error message that an attempt was made to
enable both VOUT and temperature monitoring.
Last but not least, return the error code reported by the underlying I2C
controller and not -ENODEV if updating the PMON_CONFIG register fails.
After all, this does not indicate that the chip is not present, but an
error in the communication with the chip.
Fixes: 4ff0ce227a ("hwmon: (pmbus/adm1275) Add support for ADM1272")
Fixes: 9da9c2dc57 ("hwmon: (adm1275) enable adm1272 temperature reporting")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230602213447.3557346-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The GSC fan pwm temperature register is in centidegrees celcius but the
Linux hwmon convention is to use milidegrees celcius. Fix the scaling.
Fixes: 3bce5377ef ("hwmon: Add Gateworks System Controller support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://lore.kernel.org/r/20230606153004.1448086-1-tharvey@gateworks.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
