Various phases of fsck involve checking references from one btree to
another: this means doing a sequential scan of one btree, and then
mostly random access into the second.
This is particularly painful for checking extents <-> backpointers; we
can prefetch btree node access on the sequential scan, but not on the
random access portion, and this is particularly painful on spinning
rust, where we'd like to keep the pipeline fairly full of btree node
reads so that the elevator can reduce seeking.
This patch implements prefetching and pinning of the portion of the
btree that we'll be doing random access to. We already calculate how
much of the random access btree will fit in memory so it's a fairly
straightforward change.
This will put more pressure on system memory usage, so we introduce a
new option, fsck_memory_usage_percent, which is the percentage of total
system ram that fsck is allowed to pin.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds an option to disable kicking out devices when splitbrain is
detected - it seems there's some issues with splitbrain detection and
we're kicking out devices erronously.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
nochanges means "we cannot issue writes at all"; it's possible to go
into a pseudo read-write mode where we pin dirty metadata in memory,
which is used for fsck in dry run mode and doing journal replay on a
read only mount, but we do not want to allow an actual read-write mount
in nochanges mode.
But we do always want to allow early read-write, during recovery - this
patch clarifies that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previosuly, the transaction commit path would have to add keys to the
btree write buffer as a separate operation, requiring additional global
synchronization.
This patch introduces a new journal entry type, which indicates that the
keys need to be copied into the btree write buffer prior to being
written out. We switch the journal entry type back to
JSET_ENTRY_btree_keys prior to write, so this is not an on disk format
change.
Flushing the btree write buffer may require pulling keys out of journal
entries yet to be written, and quiescing outstanding journal
reservations; we previously added journal->buf_lock for synchronization
with the journal write path.
We also can't put strict bounds on the number of keys in the journal
destined for the write buffer, which means we might overflow the size of
the preallocated buffer and have to reallocate - this introduces a
potentially fatal memory allocation failure. This is something we'll
have to watch for, if it becomes an issue in practice we can do
additional mitigation.
The transaction commit path no longer has to explicitly check if the
write buffer is full and wait on flushing; this is another performance
optimization. Instead, when the btree write buffer is close to full we
change the journal watermark, so that only reservations for journal
reclaim are allowed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Upcoming patches are going to add two new ioctls for running fsck in the
kernel, but pretending that we're running our normal userspace fsck.
This patch adds some plumbing for redirecting our normal log messages
away from the dmesg log to a thread_with_file file descriptor - via a
struct log_output, which will be consumed by the fsck f_op's read method.
The new ioctls will allow for running fsck in the kernel against an
offline filesystem (without mounting it), and an online filesystem. For
an offline filesystem we need a way to pass in a pointer to the
log_output, which is done via a new hidden opts.h option.
For online fsck, we can set c->output directly, but only want to
redirect log messages from the thread running fsck - hence the new
c->output_filter method.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now track IO errors per device since filesystem creation.
IO error counts can be viewed in sysfs, or with the 'bcachefs
show-super' command.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since compression options now include compression level, proper
validation is a bit more involved.
This adds bch2_compression_opt_valid(), and plumbs it around
appropriately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we can run with unknown btree IDs, we can't directly index btree
IDs into fixed size arrays.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This allows including a compression level when specifying a compression
type, e.g.
compression=zstd:15
Values from 1 through 15 indicate compression levels, 0 or unspecified
indicates the default.
For LZ4, values 3-15 specify that the HC algorithm should be used.
Note that for compatibility, extents themselves only include the
compression type, not the compression level. This means that specifying
the same compression algorithm but different compression levels for the
compression and background_compression options will have no effect.
XXX: perhaps we could add a warning for this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Before, it was parsed as a bool but internally it was really an enum:
this lets us pass in all the possible values.
But we special case the option parsing: no supplied value is parsed as
FSCK_FIX_yes, to match the previous behaviour.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The version_upgrade parameter is now an enum, not a bool, and it's
persistent in the superblock:
- compatible (default): upgrade to the latest compatible version
- incompatible: upgrade to latest incompatible version
- none
Currently all upgrades are incompatible upgrades, but the next release
will introduce major:minor versions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds an option for completely disabling nocow mode, including the
locking in the data move path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds support for nocow mode, where we do writes in-place when
possible. Patch components:
- New boolean filesystem and inode option, nocow: note that when nocow
is enabled, data checksumming and compression are implicitly disabled
- To prevent in-place writes from racing with data moves
(data_update.c) or bucket reuse (i.e. a bucket being reused and
re-allocated while a nocow write is in flight, we have a new locking
mechanism.
Buckets can be locked for either data update or data move, using a
fixed size hash table of two_state_shared locks. We don't have any
chaining, meaning updates and moves to different buckets that hash to
the same lock will wait unnecessarily - we'll want to watch for this
becoming an issue.
- The allocator path also needs to check for in-place writes in flight
to a given bucket before giving it out: thus we add another counter
to bucket_alloc_state so we can track this.
- Fsync now may need to issue cache flushes to block devices instead of
flushing the journal. We add a device bitmask to bch_inode_info,
ei_devs_need_flush, which tracks devices that need to have flushes
issued - note that this will lead to unnecessary flushes when other
codepaths have already issued flushes, we may want to replace this with
a sequence number.
- New nocow write path: look up extents, and if they're writable write
to them - otherwise fall back to the normal COW write path.
XXX: switch to sequence numbers instead of bitmask for devs needing
journal flush
XXX: ei_quota_lock being a mutex means bch2_nocow_write_done() needs to
run in process context - see if we can improve this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new method of doing btree updates - a straight write buffer,
implemented as a flat fixed size array.
This is only useful when we don't need to read from the btree in order
to do the update, and when reading is infrequent - perfect for the LRU
btree.
This will make LRU btree updates fast enough that we'll be able to use
it for persistently indexing buckets by fragmentation, which will be a
massive boost to copygc performance.
Changes:
- A new btree_insert_type enum, for btree_insert_entries. Specifies
btree, btree key cache, or btree write buffer.
- bch2_trans_update_buffered(): updates via the btree write buffer
don't need a btree path, so we need a new update path.
- Transaction commit path changes:
The update to the btree write buffer both mutates global, and can
fail if there isn't currently room. Therefore we do all write buffer
updates in the transaction all at once, and also if it fails we have
to revert filesystem usage counter changes.
If there isn't room we flush the write buffer in the transaction
commit error path and retry.
- A new persistent option, for specifying the number of entries in the
write buffer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This improves io_opts() and makes it a non-inline function - it's big
enough that it probably shouldn't be.
Also, bch_io_opts no longer needs fields for whether options are
defined, so we can slim it down a bit.
We'd like to stop passing around the full bch_io_opts, but that'll be
tricky because of bch2_rebalance_add_key().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It turns out the *_defined entries of bch_io_opts are only used in one
place - in the xattr get path - and there we immediately convert to a
bch_opts struct, which also has the *_defined entries.
This patch changes bch2_inode_opts_to_opts() to go directly from
bch_inode_unpacked to bch_opts, which is a minor simplification and will
also let us slim down struct bch_io_opts in another patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Sometimes we see IO errors due to O_DIRECT alignment issues - having an
option to use buffered IO will be helpful.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
-o verbose is very useful, and we're starting to use it more for runtime
debug statements - making it possible to enable at runtime is a no
brainer.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a new option, move_bytes_in_flight, for configuring the amount
of IO in flight by copygc/rebalance - users with many devices in their
filesystem will want to increase this.
In the future we should be smarter about this, but this is an easy
improvement.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Rust FFI lacks support for unnamed structs and unions. The space
saved in bch_option is not enough to be significant.
Signed-off-by: Brett Holman <bholman.devel@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This option was useful when the replicas mechism was new and still being
debugged, but hasn't been used in ages - let's delete it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
In the old allocator code, buckets would be discarded just prior to
being used - this made sense in bcache where we were discarding buckets
just after invalidating the cached data they contain, but in a
filesystem where we typically have more free space we want to be
discarding buckets when they become empty.
This patch implements the new behaviour - it checks the need_discard
btree for buckets awaiting discards, and then clears the appropriate
bit in the alloc btree, which moves the buckets to the freespace btree.
Additionally, discards are now enabled by default.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're seeing a very strange bug where journal_flush_delay sometimes gets
set to 0 in the superblock. Together with the preceding patch, this
should help us track it down.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This moves validation of superblock options to bch2_sb_validate(), so
they'll be checked in the write path as well.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Now we've got strings for metadata versions - this changes
bch2_sb_to_text() and our mount log message to use it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Options no longer have to be manually added to bch2_sb_to_text() - it
now uses the master list of options in opts.h. Also, improve some of the
formatting by converting it to tabstops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add an option that tells recovery to only read the journal, to be used
by the list_journal command.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a _to_text() pretty printer for journal entries - including
every subtype - which will shortly be used by the 'bcachefs
list_journal' subcommand.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Add a journal entry type for logging messages, and add an option to use
it to log the transaction name - this makes for a very handy debugging
tool, as with it we can use the 'bcachefs list_journal' command to see
not only what updates were done, but what was doing them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
It'll now be handled at format time and in sysfs like other options - it
still can only be set at format time, though.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds flags for options that must be a power of two (block size and
btree node size), and options that are stored in the superblock as a
power of two (encoded extent max).
Also: options are now stored in memory in the same units they're
displayed in (bytes): we now convert when getting and setting from the
superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds more latency/event measurements and breaks some apart into
more events. Journal writes are broken apart into flush writes and
noflush writes, btree compactions are broken out from btree splits,
btree mergers are added, as well as btree_interior_updates - foreground
and total.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We've got three types of options now - filesystem, device and inode, and
a given option may belong to more than one of those types.
This patch changes the options to specify explicitly when they're a
filesystem option - in the future we'll probably be adding more device
options.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This converts journal_write_delay, journal_flush_disabled, and
journal_reclaim_delay to normal filesystems options, and also adds them
to the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Quota support was disabled when snapshots were released, because of some
tricky interactions with snpashots. We're sidestepping that for now -
we're simply disabling quota accounting on snapshot subvolumes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch converts more enums in the on disk format to our standard
x-macro-with-strings deal - to enable better pretty-printing.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
