Commit Graph

210 Commits

Author SHA1 Message Date
Joe Perches
a8eceea84a inet: Use fallthrough;
Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/

And by hand:

net/ipv6/ip6_fib.c has a fallthrough comment outside of an #ifdef block
that causes gcc to emit a warning if converted in-place.

So move the new fallthrough; inside the containing #ifdef/#endif too.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 15:55:00 -07:00
Amol Grover
28b380e289 ip6mr: Fix RCU list debugging warning
ip6mr_for_each_table() macro uses list_for_each_entry_rcu()
for traversing outside an RCU read side critical section
but under the protection of rtnl_mutex. Hence add the
corresponding lockdep expression to silence the following
false-positive warnings:

[    4.319479] =============================
[    4.319480] WARNING: suspicious RCU usage
[    4.319482] 5.5.4-stable #17 Tainted: G            E
[    4.319483] -----------------------------
[    4.319485] net/ipv6/ip6mr.c:1243 RCU-list traversed in non-reader section!!

[    4.456831] =============================
[    4.456832] WARNING: suspicious RCU usage
[    4.456834] 5.5.4-stable #17 Tainted: G            E
[    4.456835] -----------------------------
[    4.456837] net/ipv6/ip6mr.c:1582 RCU-list traversed in non-reader section!!

Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24 13:19:21 -08:00
Jiri Pirko
b7a595577e net: fib_notifier: propagate extack down to the notifier block callback
Since errors are propagated all the way up to the caller, propagate
possible extack of the caller all the way down to the notifier block
callback.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04 11:10:56 -07:00
Hangbin Liu
0079ad8e8d ipmr: remove hard code cache_resolve_queue_len limit
This is a re-post of previous patch wrote by David Miller[1].

Phil Karn reported[2] that on busy networks with lots of unresolved
multicast routing entries, the creation of new multicast group routes
can be extremely slow and unreliable.

The reason is we hard-coded multicast route entries with unresolved source
addresses(cache_resolve_queue_len) to 10. If some multicast route never
resolves and the unresolved source addresses increased, there will
be no ability to create new multicast route cache.

To resolve this issue, we need either add a sysctl entry to make the
cache_resolve_queue_len configurable, or just remove cache_resolve_queue_len
limit directly, as we already have the socket receive queue limits of mrouted
socket, pointed by David.

>From my side, I'd perfer to remove the cache_resolve_queue_len limit instead
of creating two more(IPv4 and IPv6 version) sysctl entry.

[1] https://lkml.org/lkml/2018/7/22/11
[2] https://lkml.org/lkml/2018/7/21/343

v3: instead of remove cache_resolve_queue_len totally, let's only remove
the hard code limit when allocate the unresolved cache, as Eric Dumazet
suggested, so we don't need to re-count it in other places.

v2: hold the mfc_unres_lock while walking the unresolved list in
queue_count(), as Nikolay Aleksandrov remind.

Reported-by: Phil Karn <karn@ka9q.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07 17:49:00 +02:00
Thomas Gleixner
2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
NeilBrown
8f0db01800 rhashtable: use bit_spin_locks to protect hash bucket.
This patch changes rhashtables to use a bit_spin_lock on BIT(1) of the
bucket pointer to lock the hash chain for that bucket.

The benefits of a bit spin_lock are:
 - no need to allocate a separate array of locks.
 - no need to have a configuration option to guide the
   choice of the size of this array
 - locking cost is often a single test-and-set in a cache line
   that will have to be loaded anyway.  When inserting at, or removing
   from, the head of the chain, the unlock is free - writing the new
   address in the bucket head implicitly clears the lock bit.
   For __rhashtable_insert_fast() we ensure this always happens
   when adding a new key.
 - even when lockings costs 2 updates (lock and unlock), they are
   in a cacheline that needs to be read anyway.

The cost of using a bit spin_lock is a little bit of code complexity,
which I think is quite manageable.

Bit spin_locks are sometimes inappropriate because they are not fair -
if multiple CPUs repeatedly contend of the same lock, one CPU can
easily be starved.  This is not a credible situation with rhashtable.
Multiple CPUs may want to repeatedly add or remove objects, but they
will typically do so at different buckets, so they will attempt to
acquire different locks.

As we have more bit-locks than we previously had spinlocks (by at
least a factor of two) we can expect slightly less contention to
go with the slightly better cache behavior and reduced memory
consumption.

To enhance type checking, a new struct is introduced to represent the
  pointer plus lock-bit
that is stored in the bucket-table.  This is "struct rhash_lock_head"
and is empty.  A pointer to this needs to be cast to either an
unsigned lock, or a "struct rhash_head *" to be useful.
Variables of this type are most often called "bkt".

Previously "pprev" would sometimes point to a bucket, and sometimes a
->next pointer in an rhash_head.  As these are now different types,
pprev is NULL when it would have pointed to the bucket. In that case,
'blk' is used, together with correct locking protocol.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07 19:12:12 -07:00
Ido Schimmel
87c11f1ddb ip6mr: Do not call __IP6_INC_STATS() from preemptible context
Similar to commit 44f49dd8b5 ("ipmr: fix possible race resulting from
improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot
assume preemption is disabled when incrementing the counter and
accessing a per-CPU variable.

Preemption can be enabled when we add a route in process context that
corresponds to packets stored in the unresolved queue, which are then
forwarded using this route [1].

Fix this by using IP6_INC_STATS() which takes care of disabling
preemption on architectures where it is needed.

[1]
[  157.451447] BUG: using __this_cpu_add() in preemptible [00000000] code: smcrouted/2314
[  157.460409] caller is ip6mr_forward2+0x73e/0x10e0
[  157.460434] CPU: 3 PID: 2314 Comm: smcrouted Not tainted 5.0.0-rc7-custom-03635-g22f2712113f1 #1336
[  157.460449] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[  157.460461] Call Trace:
[  157.460486]  dump_stack+0xf9/0x1be
[  157.460553]  check_preemption_disabled+0x1d6/0x200
[  157.460576]  ip6mr_forward2+0x73e/0x10e0
[  157.460705]  ip6_mr_forward+0x9a0/0x1510
[  157.460771]  ip6mr_mfc_add+0x16b3/0x1e00
[  157.461155]  ip6_mroute_setsockopt+0x3cb/0x13c0
[  157.461384]  do_ipv6_setsockopt.isra.8+0x348/0x4060
[  157.462013]  ipv6_setsockopt+0x90/0x110
[  157.462036]  rawv6_setsockopt+0x4a/0x120
[  157.462058]  __sys_setsockopt+0x16b/0x340
[  157.462198]  __x64_sys_setsockopt+0xbf/0x160
[  157.462220]  do_syscall_64+0x14d/0x610
[  157.462349]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 0912ea38de ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04 10:55:48 -08:00
Callum Sinclair
ca8d4794f6 ipmr: ip6mr: Create new sockopt to clear mfc cache or vifs
Currently the only way to clear the forwarding cache was to delete the
entries one by one using the MRT_DEL_MFC socket option or to destroy and
recreate the socket.

Create a new socket option which with the use of optional flags can
clear any combination of multicast entries (static or not static) and
multicast vifs (static or not static).

Calling the new socket option MRT_FLUSH with the flags MRT_FLUSH_MFC and
MRT_FLUSH_VIFS will clear all entries and vifs on the socket except for
static entries.

Signed-off-by: Callum Sinclair <callum.sinclair@alliedtelesis.co.nz>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 13:05:05 -08:00
Nir Dotan
146820cc24 ip6mr: Fix notifiers call on mroute_clean_tables()
When the MC route socket is closed, mroute_clean_tables() is called to
cleanup existing routes. Mistakenly notifiers call was put on the cleanup
of the unresolved MC route entries cache.
In a case where the MC socket closes before an unresolved route expires,
the notifier call leads to a crash, caused by the driver trying to
increment a non initialized refcount_t object [1] and then when handling
is done, to decrement it [2]. This was detected by a test recently added in
commit 6d4efada3b ("selftests: forwarding: Add multicast routing test").

Fix that by putting notifiers call on the resolved entries traversal,
instead of on the unresolved entries traversal.

[1]

[  245.748967] refcount_t: increment on 0; use-after-free.
[  245.754829] WARNING: CPU: 3 PID: 3223 at lib/refcount.c:153 refcount_inc_checked+0x2b/0x30
...
[  245.802357] Hardware name: Mellanox Technologies Ltd. MSN2740/SA001237, BIOS 5.6.5 06/07/2016
[  245.811873] RIP: 0010:refcount_inc_checked+0x2b/0x30
...
[  245.907487] Call Trace:
[  245.910231]  mlxsw_sp_router_fib_event.cold.181+0x42/0x47 [mlxsw_spectrum]
[  245.917913]  notifier_call_chain+0x45/0x7
[  245.922484]  atomic_notifier_call_chain+0x15/0x20
[  245.927729]  call_fib_notifiers+0x15/0x30
[  245.932205]  mroute_clean_tables+0x372/0x3f
[  245.936971]  ip6mr_sk_done+0xb1/0xc0
[  245.940960]  ip6_mroute_setsockopt+0x1da/0x5f0
...

[2]

[  246.128487] refcount_t: underflow; use-after-free.
[  246.133859] WARNING: CPU: 0 PID: 7 at lib/refcount.c:187 refcount_sub_and_test_checked+0x4c/0x60
[  246.183521] Hardware name: Mellanox Technologies Ltd. MSN2740/SA001237, BIOS 5.6.5 06/07/2016
...
[  246.193062] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fibmr_event_work [mlxsw_spectrum]
[  246.202394] RIP: 0010:refcount_sub_and_test_checked+0x4c/0x60
...
[  246.298889] Call Trace:
[  246.301617]  refcount_dec_and_test_checked+0x11/0x20
[  246.307170]  mlxsw_sp_router_fibmr_event_work.cold.196+0x47/0x78 [mlxsw_spectrum]
[  246.315531]  process_one_work+0x1fa/0x3f0
[  246.320005]  worker_thread+0x2f/0x3e0
[  246.324083]  kthread+0x118/0x130
[  246.327683]  ? wq_update_unbound_numa+0x1b0/0x1b0
[  246.332926]  ? kthread_park+0x80/0x80
[  246.337013]  ret_from_fork+0x1f/0x30

Fixes: 088aa3eec2 ("ip6mr: Support fib notifications")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27 23:16:07 -08:00
Willem de Bruijn
cb9f1b7838 ip: validate header length on virtual device xmit
KMSAN detected read beyond end of buffer in vti and sit devices when
passing truncated packets with PF_PACKET. The issue affects additional
ip tunnel devices.

Extend commit 76c0ddd8c3 ("ip6_tunnel: be careful when accessing the
inner header") and commit ccfec9e5cb ("ip_tunnel: be careful when
accessing the inner header").

Move the check to a separate helper and call at the start of each
ndo_start_xmit function in net/ipv4 and net/ipv6.

Minor changes:
- convert dev_kfree_skb to kfree_skb on error path,
  as dev_kfree_skb calls consume_skb which is not for error paths.
- use pskb_network_may_pull even though that is pedantic here,
  as the same as pskb_may_pull for devices without llheaders.
- do not cache ipv6 hdrs if used only once
  (unsafe across pskb_may_pull, was more relevant to earlier patch)

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 12:05:02 -08:00
David S. Miller
2be09de7d6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 11:53:36 -08:00
David Ahern
f5c6dfdefb ip6mr: Drop mfc6_cache argument to ip6mr_forward2
mfc6_cache is not needed by ip6mr_forward2 so drop it from the input
argument list.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:31:14 -08:00
Gustavo A. R. Silva
69d2c86766 ip6mr: Fix potential Spectre v1 vulnerability
vr.mifi is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

net/ipv6/ip6mr.c:1845 ip6mr_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap)
net/ipv6/ip6mr.c:1919 ip6mr_compat_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap)

Fix this by sanitizing vr.mifi before using it to index mrt->vif_table'

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14 15:34:28 -08:00
Petr Machata
00f54e6892 net: core: dev: Add extack argument to dev_open()
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_open().

Therefore extend dev_open() with and extra extack argument and update
all users. Most of the calls end up just encoding NULL, but bond and
team drivers have the extack readily available.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06 13:26:06 -08:00
David Ahern
ae677bbb44 net: Don't return invalid table id error when dumping all families
When doing a route dump across all address families, do not error out
if the table does not exist. This allows a route dump for AF_UNSPEC
with a table id that may only exist for some of the families.

Do return the table does not exist error if dumping routes for a
specific family and the table does not exist.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24 14:06:25 -07:00
David Ahern
effe679266 net: Enable kernel side filtering of route dumps
Update parsing of route dump request to enable kernel side filtering.
Allow filtering results by protocol (e.g., which routing daemon installed
the route), route type (e.g., unicast), table id and nexthop device. These
amount to the low hanging fruit, yet a huge improvement, for dumping
routes.

ip_valid_fib_dump_req is called with RTNL held, so __dev_get_by_index can
be used to look up the device index without taking a reference. From
there filter->dev is only used during dump loops with the lock still held.

Set NLM_F_DUMP_FILTERED in the answer_flags so the user knows the results
have been filtered should no entries be returned.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16 00:14:07 -07:00
David Ahern
cb167893f4 net: Plumb support for filtering ipv4 and ipv6 multicast route dumps
Implement kernel side filtering of routes by egress device index and
table id. If the table id is given in the filter, lookup table and
call mr_table_dump directly for it.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16 00:13:39 -07:00
David Ahern
4724676d55 net: Add struct for fib dump filter
Add struct fib_dump_filter for options on limiting which routes are
returned in a dump request. The current list is table id, protocol,
route type, rtm_flags and nexthop device index. struct net is needed
to lookup the net_device from the index.

Declare the filter for each route dump handler and plumb the new
arguments from dump handlers to ip_valid_fib_dump_req.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16 00:13:12 -07:00
David Ahern
e8ba330ac0 rtnetlink: Update fib dumps for strict data checking
Add helper to check netlink message for route dumps. If the strict flag
is set the dump request is expected to have an rtmsg struct as the header.
All elements of the struct are expected to be 0 with the exception of
rtm_flags (which is used by both ipv4 and ipv6 dumps) and no attributes
can be appended. rtm_flags can only have RTM_F_CLONED and RTM_F_PREFIX
set.

Update inet_dump_fib, inet6_dump_fib, mpls_dump_routes, ipmr_rtm_dumproute,
and ip6mr_rtm_dumproute to call this helper if strict data checking is
enabled.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08 10:39:05 -07:00
Patrick Ruddy
e4a38c0c4b ipv6: add vrf table handling code for ipv6 mcast
The code to obtain the correct table for the incoming interface was
missing for IPv6. This has been added along with the table creation
notification to fib rules for the RTNL_FAMILY_IP6MR address family.

Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 22:29:08 -07:00
NeilBrown
0eb71a9da5 rhashtable: split rhashtable.h
Due to the use of rhashtables in net namespaces,
rhashtable.h is included in lots of the kernel,
so a small changes can required a large recompilation.
This makes development painful.

This patch splits out rhashtable-types.h which just includes
the major type declarations, and does not include (non-trivial)
inline code.  rhashtable.h is no longer included by anything
in the include/ directory.
Common include files only include rhashtable-types.h so a large
recompilation is only triggered when that changes.

Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22 13:43:27 +09:00
Linus Torvalds
1c8c5a9d38 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...
2018-06-06 18:39:49 -07:00
Sabrina Dubroca
e783bb00ad ipmr: fix error path when ipmr_new_table fails
commit 0bbbf0e7d0 ("ipmr, ip6mr: Unite creation of new mr_table")
refactored ipmr_new_table, so that it now returns NULL when
mr_table_alloc fails. Unfortunately, all callers of ipmr_new_table
expect an ERR_PTR.

This can result in NULL deref, for example when ipmr_rules_exit calls
ipmr_free_table with NULL net->ipv4.mrt in the
!CONFIG_IP_MROUTE_MULTIPLE_TABLES version.

This patch makes mr_table_alloc return errors, and changes
ip6mr_new_table and its callers to return/expect error pointers as
well. It also removes the version of mr_table_alloc defined under
!CONFIG_IP_MROUTE_COMMON, since it is never used.

Fixes: 0bbbf0e7d0 ("ipmr, ip6mr: Unite creation of new mr_table")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05 12:26:41 -04:00
Sabrina Dubroca
848235edb5 ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
Currently, raw6_sk(sk)->ip6mr_table is set unconditionally during
ip6_mroute_setsockopt(MRT6_TABLE). A subsequent attempt at the same
setsockopt will fail with -ENOENT, since we haven't actually created
that table.

A similar fix for ipv4 was included in commit 5e1859fbcc ("ipv4: ipmr:
various fixes and cleanups").

Fixes: d1db275dd3 ("ipv6: ip6mr: support multiple tables")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05 12:26:39 -04:00
Christoph Hellwig
c350637227 proc: introduce proc_create_net{,_data}
Variants of proc_create{,_data} that directly take a struct seq_operations
and deal with network namespaces in ->open and ->release.  All callers of
proc_create + seq_open_net converted over, and seq_{open,release}_net are
removed entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:24:30 +02:00
Roopa Prabhu
b16fb418b1 net: fib_rules: add extack support
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23 10:21:24 -04:00
Kirill Tkhai
2f635ceeb2 net: Drop pernet_operations::async
Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 13:18:09 -04:00
Yuval Mintz
8c13af2a21 ip6mr: Add refcounting to mfc
Since ipmr and ip6mr are using the same mr_mfc struct at their core, we
can now refactor the ipmr_cache_{hold,put} logic and apply refcounting
to both ipmr and ip6mr.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 13:14:43 -04:00
Yuval Mintz
d3c07e5b99 ip6mr: Add API for default_rule fib
Add the ability to discern whether a given FIB rule notification relates
to the default rule inserted when registering ip6mr or a different one.

Would later be used by drivers wishing to offload ipv6 multicast routes
but unable to offload rules other than the default one.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 13:14:43 -04:00
Yuval Mintz
088aa3eec2 ip6mr: Support fib notifications
In similar fashion to ipmr, support fib notifications for ip6mr mfc and
vif related events. This would later allow drivers to react to said
notifications and offload the IPv6 mroutes.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 13:14:43 -04:00
Eric Dumazet
a366e300ae ip6mr: remove synchronize_rcu() in favor of SOCK_RCU_FREE
Kirill found that recently added synchronize_rcu() call in
ip6mr_sk_done()
was slowing down netns dismantle and posted a patch to use it only if
the socket
was found.

I instead suggested to get rid of this call, and use instead
SOCK_RCU_FREE

We might later change IPv4 side to use the same technique and unify
both stacks. IPv4 does not use synchronize_rcu() but has a call_rcu()
that could be replaced by SOCK_RCU_FREE.

Tested:
 time for i in {1..1000}; do unshare -n /bin/false;done

 Before : real 7m18.911s
 After : real 10.187s

Fixes: 8571ab479a ("ip6mr: Make mroute_sk rcu-based")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07 18:13:41 -05:00
Yuval Mintz
7b0db85737 ipmr, ip6mr: Unite dumproute flows
The various MFC entries are being held in the same kind of mr_tables
for both ipmr and ip6mr, and their traversal logic is identical.
Also, with the exception of the addresses [and other small tidbits]
the major bulk of the nla setting is identical.

Unite as much of the dumping as possible between the two.
Notice this requires creating an mr_table iterator for each, as the
for-each preprocessor macro can't be used by the common logic.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Yuval Mintz
889cd83cbe ip6mr: Remove MFC_NOTIFY and refactor flags
MFC_NOTIFY exists in ip6mr, probably as some legacy code
[was already removed for ipmr in commit
06bd6c0370 ("net: ipmr: remove unused MFC_NOTIFY flag and make the flags enum").
Remove it from ip6mr as well, and move the enum into a common file;
Notice MFC_OFFLOAD is currently only used by ipmr.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Yuval Mintz
3feda6b46f ipmr, ip6mr: Unite vif seq functions
Same as previously done with the mfc seq, the logic for the vif seq is
refactored to be shared between ipmr and ip6mr.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Yuval Mintz
c8d6196803 ipmr, ip6mr: Unite mfc seq logic
With the exception of the final dump, ipmr and ip6mr have the exact same
seq logic for traversing a given mr_table. Refactor that code and make
it common.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Yuval Mintz
845c9a7ae7 ipmr, ip6mr: Unite logic for searching in MFC cache
ipmr and ip6mr utilize the exact same methods for searching the
hashed resolved connections, difference being only in the construction
of the hash comparison key.

In order to unite the flow, introduce an mr_table operation set that
would contain the protocol specific information required for common
flows, in this case - the hash parameters and a comparison key
representing a (*,*) route.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Yuval Mintz
494fff5637 ipmr, ip6mr: Make mfc_cache a common structure
mfc_cache and mfc6_cache are almost identical - the main difference is
in the origin/group addresses and comparison-key. Make a common
structure encapsulating most of the multicast routing logic  - mr_mfc
and convert both ipmr and ip6mr into using it.

For easy conversion [casting, in this case] mr_mfc has to be the first
field inside every multicast routing abstraction utilizing it.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Yuval Mintz
0bbbf0e7d0 ipmr, ip6mr: Unite creation of new mr_table
Now that both ipmr and ip6mr are using the same mr_table structure,
we can have a common function to allocate & initialize a new instance.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Yuval Mintz
b70432f731 mroute*: Make mr_table a common struct
Following previous changes to ip6mr, mr_table and mr6_table are
basically the same [up to mr6_table having additional '6' suffixes to
its variable names].
Move the common structure definition into a common header; This
requires renaming all references in ip6mr to variables that had the
distinct suffix.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Yuval Mintz
87c418bf13 ip6mr: Align hash implementation to ipmr
Since commit 8fb472c09b ("ipmr: improve hash scalability") ipmr has
been using rhashtable as a basis for its mfc routes, but ip6mr is
currently still using the old private MFC hash implementation.

Align ip6mr to the current ipmr implementation.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Yuval Mintz
8571ab479a ip6mr: Make mroute_sk rcu-based
In ipmr the mr_table socket is handled under RCU. Introduce the same
for ip6mr.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Yuval Mintz
6853f21f76 ipmr,ipmr6: Define a uniform vif_device
The two implementations have almost identical structures - vif_device and
mif_device. As a step toward uniforming the mr_tables, eliminate the
mif_device and relocate the vif_device definition into a new common
header file.

Also, introduce a common initializing function for setting most of the
vif_device fields in a new common source file. This requires modifying
the ipv{4,6] Kconfig and ipv4 makefile as we're introducing a new common
config option - CONFIG_IP_MROUTE_COMMON.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:13:23 -05:00
Kirill Tkhai
b01a59a488 net: Convert ip6mr_net_ops
These pernet_operations create and destroy /proc entries,
populate and depopulate net::rules_ops and multiroute table.
All the structures are pernet, and they are not touched
by foreign net pernet_operations. So, it's possible to mark
them async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:10 -05:00
Nikolay Aleksandrov
4adfa79fc2 ip6mr: fix stale iterator
When we dump the ip6mr mfc entries via proc, we initialize an iterator
with the table to dump but we don't clear the cache pointer which might
be initialized from a prior read on the same descriptor that ended. This
can result in lock imbalance (an unnecessary unlock) leading to other
crashes and hangs. Clear the cache pointer like ipmr does to fix the issue.
Thanks for the reliable reproducer.

Here's syzbot's trace:
 WARNING: bad unlock balance detected!
 4.15.0-rc3+ #128 Not tainted
 syzkaller971460/3195 is trying to release lock (mrt_lock) at:
 [<000000006898068d>] ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553
 but there are no more locks to release!

 other info that might help us debug this:
 1 lock held by syzkaller971460/3195:
  #0:  (&p->lock){+.+.}, at: [<00000000744a6565>] seq_read+0xd5/0x13d0
 fs/seq_file.c:165

 stack backtrace:
 CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128
 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
 Google 01/01/2011
 Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x257 lib/dump_stack.c:53
  print_unlock_imbalance_bug+0x12f/0x140 kernel/locking/lockdep.c:3561
  __lock_release kernel/locking/lockdep.c:3775 [inline]
  lock_release+0x5f9/0xda0 kernel/locking/lockdep.c:4023
  __raw_read_unlock include/linux/rwlock_api_smp.h:225 [inline]
  _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255
  ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553
  traverse+0x3bc/0xa00 fs/seq_file.c:135
  seq_read+0x96a/0x13d0 fs/seq_file.c:189
  proc_reg_read+0xef/0x170 fs/proc/inode.c:217
  do_loop_readv_writev fs/read_write.c:673 [inline]
  do_iter_read+0x3db/0x5b0 fs/read_write.c:897
  compat_readv+0x1bf/0x270 fs/read_write.c:1140
  do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189
  C_SYSC_preadv fs/read_write.c:1209 [inline]
  compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203
  do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline]
  do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389
  entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125
 RIP: 0023:0xf7f73c79
 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d
 RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0
 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000
 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 BUG: sleeping function called from invalid context at lib/usercopy.c:25
 in_atomic(): 1, irqs_disabled(): 0, pid: 3195, name: syzkaller971460
 INFO: lockdep is turned off.
 CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128
 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
 Google 01/01/2011
 Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x257 lib/dump_stack.c:53
  ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6060
  __might_sleep+0x95/0x190 kernel/sched/core.c:6013
  __might_fault+0xab/0x1d0 mm/memory.c:4525
  _copy_to_user+0x2c/0xc0 lib/usercopy.c:25
  copy_to_user include/linux/uaccess.h:155 [inline]
  seq_read+0xcb4/0x13d0 fs/seq_file.c:279
  proc_reg_read+0xef/0x170 fs/proc/inode.c:217
  do_loop_readv_writev fs/read_write.c:673 [inline]
  do_iter_read+0x3db/0x5b0 fs/read_write.c:897
  compat_readv+0x1bf/0x270 fs/read_write.c:1140
  do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189
  C_SYSC_preadv fs/read_write.c:1209 [inline]
  compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203
  do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline]
  do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389
  entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125
 RIP: 0023:0xf7f73c79
 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d
 RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0
 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000
 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 WARNING: CPU: 1 PID: 3195 at lib/usercopy.c:26 _copy_to_user+0xb5/0xc0
 lib/usercopy.c:26

Reported-by: syzbot <bot+eceb3204562c41a438fa1f2335e0fe4f6886d669@syzkaller.appspotmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31 10:26:30 -05:00
Alexey Dobriyan
96890d6252 net: delete /proc THIS_MODULE references
/proc has been ignoring struct file_operations::owner field for 10 years.
Specifically, it started with commit 786d7e1612
("Fix rmmod/read/write races in /proc entries"). Notice the chunk where
inode->i_fop is initialized with proxy struct file_operations for
regular files:

	-               if (de->proc_fops)
	-                       inode->i_fop = de->proc_fops;
	+               if (de->proc_fops) {
	+                       if (S_ISREG(inode->i_mode))
	+                               inode->i_fop = &proc_reg_file_ops;
	+                       else
	+                               inode->i_fop = de->proc_fops;
	+               }

VFS stopped pinning module at this point.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16 15:01:33 -05:00
Florian Westphal
a3fde2addd rtnetlink: ipv6: convert remaining users to rtnl_register_module
convert remaining users of rtnl_register to rtnl_register_module
and un-export rtnl_register.

Requested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04 13:35:36 -05:00
Kees Cook
e99e88a9d2 treewide: setup_timer() -> timer_setup()
This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.

Casting from unsigned long:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, ptr);

and forced object casts:

    void my_callback(struct something *ptr)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);

become:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

Direct function assignments:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    ptr->my_timer.function = my_callback;

have a temporary cast added, along with converting the args:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;

And finally, callbacks without a data assignment:

    void my_callback(unsigned long data)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, 0);

have their argument renamed to verify they're unused during conversion:

    void my_callback(struct timer_list *unused)
    {
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

The conversion is done with the following Coccinelle script:

spatch --very-quiet --all-includes --include-headers \
	-I ./arch/x86/include -I ./arch/x86/include/generated \
	-I ./include -I ./arch/x86/include/uapi \
	-I ./arch/x86/include/generated/uapi -I ./include/uapi \
	-I ./include/generated/uapi --include ./include/linux/kconfig.h \
	--dir . \
	--cocci-file ~/src/data/timer_setup.cocci

@fix_address_of@
expression e;
@@

 setup_timer(
-&(e)
+&e
 , ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
 _E->_timer@_stl.function = _callback;
|
 _E->_timer@_stl.function = &_callback;
|
 _E->_timer@_stl.function = (_cast_func)_callback;
|
 _E->_timer@_stl.function = (_cast_func)&_callback;
|
 _E._timer@_stl.function = _callback;
|
 _E._timer@_stl.function = &_callback;
|
 _E._timer@_stl.function = (_cast_func)_callback;
|
 _E._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
 depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
(
	... when != _origarg
	_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
)
 }

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
 depends on change_timer_function_usage &&
                     !change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
+	_handletype *_origarg = from_timer(_origarg, t, _timer);
+
	... when != _origarg
-	(_handletype *)_origarg
+	_origarg
	... when != _origarg
 }

// Avoid already converted callbacks.
@match_callback_converted
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
	    !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

 void _callback(struct timer_list *t)
 { ... }

// callback(struct something *handle)
@change_callback_handle_arg
 depends on change_timer_function_usage &&
	    !match_callback_converted &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

 void _callback(
-_handletype *_handle
+struct timer_list *t
 )
 {
+	_handletype *_handle = from_timer(_handle, t, _timer);
	...
 }

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
 depends on change_timer_function_usage &&
	    change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

 void _callback(struct timer_list *t)
 {
-	_handletype *_handle = from_timer(_handle, t, _timer);
 }

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg &&
	    !change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
 _E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

 _callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
 )

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)

@change_callback_unused_data
 depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *unused
 )
 {
	... when != _origarg
 }

Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21 15:57:07 -08:00
Francesco Ruggeri
338d182fa5 ipv6: try not to take rtnl_lock in ip6mr_sk_done
Avoid traversing the list of mr6_tables (which requires the
rtnl_lock) in ip6mr_sk_done(), when we know in advance that
a match will not be found.
This can happen when rawv6_close()/ip6mr_sk_done() is invoked
on non-mroute6 sockets.
This patch helps reduce rtnl_lock contention when destroying
a large number of net namespaces, each having a non-mroute6
raw socket.

v2: same patch, only fixed subject line and expanded comment.

Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13 10:13:04 +09:00
Gustavo A. R. Silva
275757e6ba ipv6: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in some cases I placed the "fall through" comment
on its own line, which is what GCC is expecting to find.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18 14:13:08 +01:00
Florian Westphal
b97bac64a5 rtnetlink: make rtnl_register accept a flags parameter
This change allows us to later indicate to rtnetlink core that certain
doit functions should be called without acquiring rtnl_mutex.

This change should have no effect, we simply replace the last (now
unused) calcit argument with the new flag.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 16:57:38 -07:00