Both wq_context and srq_context are some leftover from the past in uverbs
layer, they are not really in use, drop them.
Link: https://lore.kernel.org/r/20200506082444.14502-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers need the 'get', so do it in a central place before returning
the pointer.
Link: https://lore.kernel.org/r/20200506074701.9775-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The only caller doesn't care about the timewait, so acquire and return the
cm_id_private from the function.
Link: https://lore.kernel.org/r/20200506074701.9775-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The way the cm_timewait_info is converted into a work and then freed
is very subtle and surprising, add a note clarifying the lifetime
here.
Link: https://lore.kernel.org/r/20200506074701.9775-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Also rename it to cm_remove_remote(). This function now removes the
tracking of the remote ID/QPN in the redblack trees from a cm_id_private.
Replace a open-coded version with a call. The open coded version was
deleting only the remote_id, however at this call site the qpn can not
have been in the RB tree either, so the cm_remove_remote() will do the
same.
Link: https://lore.kernel.org/r/20200506074701.9775-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While unlocking a spinlock held by the caller is a disturbing pattern,
this extensively duplicated code is even worse. Pull all the duplicates
into a function and explain the purpose of the algorithm.
The on creation side call in cm_req_handler() which is different has been
micro-optimized on the basis that the work_count == -1 during creation,
remove that and just use the normal function.
Link: https://lore.kernel.org/r/20200506074701.9775-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The 'goto out' label doesn't read ret, so don't set it.
Link: https://lore.kernel.org/r/20200506074701.9775-4-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This cannot happen, all callers pass in one of the two pointers. Use
a WARN_ON guard instead.
Link: https://lore.kernel.org/r/20200506074701.9775-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Under one path through ib_nl_fetch_ha() this calls nlmsg_new(GFP_KERNEL)
which is a sleeping call. This is a very rare path, so mark fetch_ha() and
the module external entry point that conditionally calls through to
fetch_ha() as might_sleep().
Link: https://lore.kernel.org/r/20200506074701.9775-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The librdmacm uses node_guid as identifier to correlate between IB devices
and CMA devices. However FW resets cause to such "connection" to be lost
and require from the user to restart its application.
Extend UCMA to return IB device index, which is stable identifier.
Link: https://lore.kernel.org/r/20200504132541.355710-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If flow label is not set by the user or it's not IPv4, initialize it with
the cma src/dst based on the "Kernighan and Ritchie's hash function".
Link: https://lore.kernel.org/r/20200504051935.269708-5-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use rdma_flow_label_to_udp_sport to calculate the UDP source port of the
RoCEV2 packet.
Link: https://lore.kernel.org/r/20200504051935.269708-3-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a client is added it isn't allowed to fail, but all the client's have
various failure paths within their add routines.
This creates the very fringe condition where the client was added, failed
during add and didn't set the client_data. The core code will then still
call other client_data centric ops like remove(), rename(), get_nl_info(),
and get_net_dev_by_params() with NULL client_data - which is confusing and
unexpected.
If the add() callback fails, then do not call any more client ops for the
device, even remove.
Remove all the now redundant checks for NULL client_data in ops callbacks.
Update all the add() callbacks to return error codes
appropriately. EOPNOTSUPP is used for cases where the ULP does not support
the ib_device - eg because it only works with IB.
Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Snoop interface is not used. Remove it.
Link: https://lore.kernel.org/r/20200413132408.931084-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a call to rdma_lag_get_ah_roce_slave() when the address handle is
created. Lower driver can use it to select the QP's affinity port.
Link: https://lore.kernel.org/r/20200430192146.12863-15-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support to get the RoCE LAG xmit slave by building skb of the RoCE
packet and call to master_get_xmit_slave. If driver wants to get the
slave assume all slaves are available, then need to set
RDMA_LAG_FLAGS_HASH_ALL_SLAVES in flags.
Link: https://lore.kernel.org/r/20200430192146.12863-14-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.
Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The function is local to cma.c, so let's limit its scope.
Link: https://lore.kernel.org/r/20200413132323.930869-1-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parsing verbs.c with kernel-doc produce some warnings:
./drivers/infiniband/core/verbs.c:2579: WARNING: Unexpected indentation.
./drivers/infiniband/core/verbs.c:2581: WARNING: Block quote ends without a blank line; unexpected unindent.
./drivers/infiniband/core/verbs.c:2613: WARNING: Unexpected indentation.
./drivers/infiniband/core/verbs.c:2579: WARNING: Unexpected indentation.
./drivers/infiniband/core/verbs.c:2581: WARNING: Block quote ends without a blank line; unexpected unindent.
./drivers/infiniband/core/verbs.c:2613: WARNING: Unexpected indentation.
Address them by adding an extra blank line and converting the parameters
on one of the arguments to a table.
Link: https://lore.kernel.org/r/4c5466d0f450c5a9952138150c3485740b37f9c5.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If is_closed is set, and the event list is empty, then read() will return
-EIO without blocking. After setting is_closed in
ib_uverbs_free_event_queue(), we do trigger a wake_up on the poll_wait,
but the fops->poll() function does not check it, so poll will continue to
sleep on an empty list.
Fixes: 14e23bd6d2 ("RDMA/core: Fix locking in ib_uverbs_event_read")
Link: https://lore.kernel.org/r/0-v1-ace813388969+48859-uverbs_poll_fix%25jgg@mellanox.com
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The majority of the patches are cleanups, refactorings and clarity
improvements
- Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1
- Lots of cleanup patches for hns
- Convert more places to use refcount
- Aggressively lock the RDMA CM code that syzkaller says isn't working
- Work to clarify ib_cm
- Use the new ib_device lifecycle model in bnxt_re
- Fix mlx5's MR cache which seems to be failing more often with the new
ODP code
- mlx5 'dynamic uar' and 'tx steering' user interfaces
-----BEGIN PGP SIGNATURE-----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=ae+a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"The majority of the patches are cleanups, refactorings and clarity
improvements.
This cycle saw some more activity from Syzkaller, I think we are now
clean on all but one of those bugs, including the long standing and
obnoxious rdma_cm locking design defect. Continue to see many drivers
getting cleanups, with a few new user visible features.
Summary:
- Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1
- Lots of cleanup patches for hns
- Convert more places to use refcount
- Aggressively lock the RDMA CM code that syzkaller says isn't
working
- Work to clarify ib_cm
- Use the new ib_device lifecycle model in bnxt_re
- Fix mlx5's MR cache which seems to be failing more often with the
new ODP code
- mlx5 'dynamic uar' and 'tx steering' user interfaces"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (144 commits)
RDMA/bnxt_re: make bnxt_re_ib_init static
IB/qib: Delete struct qib_ivdev.qp_rnd
RDMA/hns: Fix uninitialized variable bug
RDMA/hns: Modify the mask of QP number for CQE of hip08
RDMA/hns: Reduce the maximum number of extend SGE per WQE
RDMA/hns: Reduce PFC frames in congestion scenarios
RDMA/mlx5: Add support for RDMA TX flow table
net/mlx5: Add support for RDMA TX steering
IB/hfi1: Call kobject_put() when kobject_init_and_add() fails
IB/hfi1: Fix memory leaks in sysfs registration and unregistration
IB/mlx5: Move to fully dynamic UAR mode once user space supports it
IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib
IB/mlx5: Extend QP creation to get uar page index from user space
IB/mlx5: Extend CQ creation to get uar page index from user space
IB/mlx5: Expose UAR object and its alloc/destroy commands
IB/hfi1: Get rid of a warning
RDMA/hns: Remove redundant judgment of qp_type
RDMA/hns: Remove redundant assignment of wc->smac when polling cq
RDMA/hns: Remove redundant qpc setup operations
RDMA/hns: Remove meaningless prints
...
The following modify sequence (loosely based on ipoib) will lose a pkey
modifcation:
- Modify (pkey index, port)
- Modify (new pkey index, NO port)
After the first modify, the qp_pps list will have saved the pkey and the
unit on the main list.
During the second modify, get_new_pps() will fetch the port from qp_pps
and read the new pkey index from qp_attr->pkey_index. The state will
still be zero, or IB_PORT_PKEY_NOT_VALID. Because of the invalid state,
the new values will never replace the one in the qp pps list, losing the
new pkey.
This happens because the following if statements will never correct the
state because the first term will be false. If the code had been executed,
it would incorrectly overwrite valid values.
if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT))
new_pps->main.state = IB_PORT_PKEY_VALID;
if (!(qp_attr_mask & (IB_QP_PKEY_INDEX | IB_QP_PORT)) && qp_pps) {
new_pps->main.port_num = qp_pps->main.port_num;
new_pps->main.pkey_index = qp_pps->main.pkey_index;
if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID)
new_pps->main.state = IB_PORT_PKEY_VALID;
}
Fix by joining the two if statements with an or test to see if qp_pps is
non-NULL and in the correct state.
Fixes: 1dd017882e ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list")
Link: https://lore.kernel.org/r/20200313124704.14982.55907.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The first switch statement in cm_destroy_id() tries to move the ID to
either IB_CM_IDLE or IB_CM_TIMEWAIT. Both states will block concurrent
MAD handlers from progressing.
Previous patches removed the unreliably lock/unlock sequences in this
flow, this patch removes the extra locking steps and adds the missing
parts to guarantee that destroy reaches IB_CM_IDLE. There is no point in
leaving the ID in the IB_CM_TIMEWAIT state the memory about to be kfreed.
Rework things to hold the lock across all the state transitions and
directly assert when done that it ended up in IB_CM_IDLE as expected.
This was accompanied by a careful audit of all the state transitions here,
which generally did end up in IDLE on their success and non-racy paths.
Link: https://lore.kernel.org/r/20200310092545.251365-16-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The first thing ib_send_cm_sidr_rep() does is obtain the lock, so use the
usual unlocked wrapper, locked actor pattern here.
Get rid of the cm_reject_sidr_req() wrapper so each call site can call the
locked or unlocked version as required.
This avoids a sketchy lock/unlock sequence (which could allow state to
change) during cm_destroy_id().
Link: https://lore.kernel.org/r/20200310092545.251365-15-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The first thing ib_send_cm_rej() does is obtain the lock, so use the usual
unlocked wrapper, locked actor pattern here.
This avoids a sketchy lock/unlock sequence (which could allow state to
change) during cm_destroy_id().
While here simplify some of the logic in the implementation.
Link: https://lore.kernel.org/r/20200310092545.251365-14-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The first thing ib_send_cm_drep() does is obtain the lock, so use the
usual unlocked wrapper, locked actor pattern here.
This avoids a sketchy lock/unlock sequence (which could allow state to
change) during cm_destroy_id().
Link: https://lore.kernel.org/r/20200310092545.251365-13-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The first thing ib_send_cm_dreq() does is obtain the lock, so use the
usual unlocked wrapper, locked actor pattern here.
This avoids a sketchy lock/unlock sequence (which could allow state to
change) during cm_destroy_id().
Link: https://lore.kernel.org/r/20200310092545.251365-12-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These functions all touch state, so must be called under the lock.
Inspection shows this is currently true.
Link: https://lore.kernel.org/r/20200310092545.251365-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_crate_cm_id() immediately places the id in the xarray, and publishes it
into the remote_id and remote_qpn rbtrees. This makes it visible to other
threads before it is fully set up.
It appears the thinking here was that the states IB_CM_IDLE and
IB_CM_REQ_RCVD do not allow any MAD handler or lookup in the remote_id and
remote_qpn rbtrees to advance.
However, cm_rej_handler() does take an action on IB_CM_REQ_RCVD, which is
not really expected by the design.
Make the whole thing clearer:
- Keep the new cm_id out of the xarray until it is completely set up.
This directly prevents MAD handlers and all rbtree lookups from seeing
the pointer.
- Move all the trivial setup right to the top so it is obviously done
before any concurrency begins
- Move the mutation of the cm_id_priv out of cm_match_id() and into the
caller so the state transition is obvious
- Place the manipulation of the work_list at the end, under lock, after
the cm_id is placed in the xarray. The work_count cannot change on an
ID outside the xarray.
- Add some comments
Link: https://lore.kernel.org/r/20200310092545.251365-9-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_create_cm_id() immediately places the id in the xarray, so it is visible
to network traffic.
The state is initially set to IB_CM_IDLE and all the MAD handlers will
test this state under lock and refuse to advance from IDLE, so adding to
the xarray is harmless.
Further, the set to IB_CM_SIDR_REQ_RCVD also excludes all MAD handlers.
However, the local_id isn't even used for SIDR mode, and there will be no
input MADs related to the newly created ID.
So, make the whole flow simpler so it can be understood:
- Do not put the SIDR cm_id in the xarray. This directly shows that there
is no concurrency
- Delete the confusing work_count and pending_list manipulations. This
mechanism is only used by MAD handlers and timewait, neither of which
apply to SIDR.
- Add a few comments and rename 'cur_cm_id_priv' to 'listen_cm_id_priv'
- Move other loose sets up to immediately after cm_id creation so that
the cm_id is fully configured right away. This fixes an oversight where
the service_id will not be returned back on a IB_SIDR_UNSUPPORTED
reject.
Link: https://lore.kernel.org/r/20200310092545.251365-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The lock should not be dropped before doing the pr_debug() print as it is
accessing data protected by the lock, such as id.state.
Fixes: 119bf81793 ("IB/cm: Add debug prints to ib_cm")
Link: https://lore.kernel.org/r/20200310092545.251365-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any manipulation of cm_id->state must be done under the cm_id_priv->lock,
the two routines that added listens did not follow this rule, because they
never participate in any concurrent access around the state.
However, since this exception makes the code hard to understand, simplify
the flow so that it can be fully locked:
- Move manipulation of listen_sharecount into cm_insert_listen() so it is
trivially under the cm.lock without having to expose the cm.lock to the
caller.
- Push the cm.lock down into cm_insert_listen() and have the function
increment the reference count before returning an existing pointer.
- Split ib_cm_listen() into an cm_init_listen() and do not call
ib_cm_listen() from ib_cm_insert_listen()
- Make both ib_cm_listen() and ib_cm_insert_listen() directly call
cm_insert_listen() under their cm_id_priv->lock which does both a
collision detect and, if needed, the insert (atomically)
- Enclose all state manipulation within the cm_id_priv->lock, notice this
set can be done safely after cm_insert_listen() as no reader is allowed
to read the state without holding the lock.
- Do not set the listen cm_id in the xarray, as it is never correct to
look it up. This makes the concurrency simpler to understand.
Many needless error unwinds are removed in the process.
Link: https://lore.kernel.org/r/20200310092545.251365-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Too much of the destruction is very carefully sensitive to the state
and various other things. Move more code to the unconditional path and
add several WARN_ONs to check consistency.
Link: https://lore.kernel.org/r/20200310092545.251365-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When creating a cm_id during REQ the id immediately becomes visible to the
other MAD handlers, and shortly after the state is moved to IB_CM_REQ_RCVD
This allows cm_rej_handler() to run concurrently and free the work:
CPU 0 CPU1
cm_req_handler()
ib_create_cm_id()
cm_match_req()
id_priv->state = IB_CM_REQ_RCVD
cm_rej_handler()
cm_acquire_id()
spin_lock(&id_priv->lock)
switch (id_priv->state)
case IB_CM_REQ_RCVD:
cm_reset_to_idle()
kfree(id_priv->timewait_info);
goto destroy
destroy:
kfree(id_priv->timewait_info);
id_priv->timewait_info = NULL
Causing a double free or worse.
Do not free the timewait_info without also holding the
id_priv->lock. Simplify this entire flow by making the free unconditional
during cm_destroy_id() and removing the confusing special case error
unwind during creation of the timewait_info.
This also fixes a leak of the timewait if cm_destroy_id() is called in
IB_CM_ESTABLISHED with an XRC TGT QP. The state machine will be left in
ESTABLISHED while it needed to transition through IB_CM_TIMEWAIT to
release the timewait pointer.
Also fix a leak of the timewait_info if the caller mis-uses the API and
does ib_send_cm_reqs().
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20200310092545.251365-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The test here typod the cm_id_priv to use, it used the one that was
freshly allocated. By definition the allocated one has the matching
cm_handler and zero context, so the condition was always true.
Instead check that the existing listening ID is compatible with the
proposed handler so that it can be shared, as was originally intended.
Fixes: 067b171b86 ("IB/cm: Share listening CM IDs")
Link: https://lore.kernel.org/r/20200310092545.251365-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
xa_alloc_cyclic() is a SMP release to be paired with some later acquire
during xa_load() as part of cm_acquire_id().
As such, xa_alloc_cyclic() must be done after the cm_id is fully
initialized, in particular, it absolutely must be after the
refcount_set(), otherwise the refcount_inc() in cm_acquire_id() may not
see the set.
As there are several cases where a reader will be able to use the
id.local_id after cm_acquire_id in the IB_CM_IDLE state there needs to be
an unfortunate split into a NULL allocate and a finalizing xa_store.
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20200310092545.251365-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Peer to peer support was never implemented, so delete it to make code less
clutter.
Link: https://lore.kernel.org/r/20200310091438.248429-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The header file rdma_core.h is duplicate, so let's remove it.
Fixes: 622db5b643 ("RDMA/core: Add trace points to follow MR allocation")
Link: https://lore.kernel.org/r/20200310091656.249696-1-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The tgid used to be part of ib_umem_free_notifier(), when it was reworked
it got moved to release, but it should have been unconditional as all umem
alloc paths get the tgid.
As is, creating an implicit ODP will leak the tgid reference.
Link: https://lore.kernel.org/r/20200304181607.GA22412@ziepe.ca
Cc: stable@kernel.org
Fixes: f25a546e65 ("RDMA/odp: Use mmu_interval_notifier_insert()")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since RDMA rw API support operations with P2P memory sg list, make sure to
map/unmap the scatter list for signature operation correctly.
Link: https://lore.kernel.org/r/20200220100819.41860-2-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
