9053 Commits

Author	SHA1	Message	Date
Paul Kocialkowski	b0d8019854	iio: si7020: Add devicetree support and trivial bindings ... This adds devicetree support for the si7020 iio driver. Since it works well without requiring any additional property, its compatible string is added to the trivial i2c devices bindings list. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>	2016-11-01 18:49:53 +00:00
Linus Walleij	e0549df64e	iio: gyro: Add MPU-3050 device tree bindings ... This adds device tree bindings for the MPU-3050 gyroscope. Since it is the first set of bindings for a gyroscope, the folder for it is also created. Cc: devicetree@vger.kernel.org Cc: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>	2016-10-25 16:54:35 +01:00
Greg Kroah-Hartman	c7c88e998a	First round of IIO new device support, features and cleanups for the 4.10 cycle. ... Fair number of outreachy related patches in here. Some of these may well have already been picked up by Greg but git will sort that out for us. Also some good staging cleanup work from other sources. Thanks Brian and Lars in particular for this. New device support * ACCES 104-quad-8 - New driver for this 8 channel encoder input board. Lots of new ABI with this one. * AD7766 - New driver supporting AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1 and AD7767-2 24 bit ADCs. * dmard 10 - New driver for this 3 axis accelerometer. * Honeywell ABP pressure sensors. - New driver covering 56 parts in this series (too many to list here!) * HTS221 - New driver to support this relative humidiy and temperature device. * LMP91000 - New driver for this potentiostat (form of chemical sensor). Nice example of use of the buffered consumer interfaces and the use of a consumer provided trigger. * MiraMEMS DA311 - New driver for this 3 axis accelerometer. * MiraMEMS DA280 - New driver for this 3 axis accelerometer. Follow up caught up with vendor prefixes for these. Staging graduations * isl29018 light sensor - Fixes and cleanups listed below (thanks for your hard work on this Brian!) * sca3000 - Fixes and cleanups listed below. This was one of the small set of drivers that went into staging when IIO was first added. Turns out it had a few bugs and needed to be brought into the modern era! Not clear if I am the only person who actually has one of these still wired to a board. New features (Core) - Add an iio_trigger_validate_own_device helper which relies on the device and trigger having the same parent. Convenient to have this for some of the more complex trigger / device interactions. Was hand rolled in a few drivers already so good to bring it into the core. - Add an iio_read_channel_offset in kernel access helper (similar to the existing one for scale). - IIO_ATTR_{RO, WO, RW} and IIO_DEVICE_ATTR_{RO, WO, RW} macros. These lead some rather contrived function naming, but there is no denying they do reduced boilerplate. I'm going to resist their introduction in drivers 'unless' they form part of a larger set of cleanups. - Counter channel type and index type. New features (Drivers) * hdc100x - Triggered buffer support. * mcp4725 - Device tree bindings and support. - Voltage reference selection. * ti-adc0832 - Triggered buffer support. * ti-adc161s626 - Add regulator support allowing _scale and _offset values to be established and exported. New features (Tools) * iio_generic_buffer - -A option to force enable all channels rather than faulting if some are already enabled (like -a does). Followup patches tidied this support up. Cleanups (Core) - Use kmalloc_array in iio_scan_mask_set. - Take event_attrs field of iio_info structure constant - Staging todo list updates. Most of it was long done. - MAINTAINERS had a wrong directory listing. Cleanups (Drivers) * Missing i2c trivial devices entries. * ad5592r - Fix an endian type related sparse warnings. * ad7150 - Constify the event attribute_group structures. * ad7152 - Add some blank lines to improve readability. - Sampling frequency control via chan-info element rather than hand rolled attributes. - add a new lock to avoid use of mlock for non state change related locking. * ad7280 - Constify atrribute_group structure (second patch covers the event ones) * ad7606 (Lars is driving most of the cleanup on this with some additions from Eva) - Fix improper setting of oversampling pins. This has been broken a very long time in this staging driver, so not going to push this back to stable. - Implement oversampling configuration via the chan_info mask element. - Remove an unused int_vref_mv field. - Remove a reundant name field from ad7606_chip_info. - Remove default device configuration from platform_data in favour of whatever the power on defaults are. - Remove out of band error reporting in the kernel log as not providing much information. - Fix oversampling ratio by having 1 be the value for no oversampling. - Avoid allocating buffer for each data capture. - Factor out common code between periodic and one-shot capture. - Move set_drvdat into common code. - Let the common probe function return int rather than jumping through an ERR_PTR. - Pass struct device * into common remove to simplify code. - Always run trigger handler only once per event (no one can remember why it was being possibly done twice). - Move over to the GPIO descriptor API to shorten and clarify code. - Move the buffer code into the main file as it's not optional and is now rather short in this driver. - Fix the naming of the supply regulator. - Rework regulator handling to handle errors including deferred probing. - Tidy up a ptr_err or 0 return. * ad7746 - Sampling frequency control via info_mask element rather than hand rolled * ad7758 - Sampling frequency control via info_mask element rather than hand rolled attributes. * ad7816 - Constify the event attribute_group structure. * adt7316 - Constify the event attribute group structures. * ak8974 - Cleanup some sparse warnings about endian types. * ak8975 - Cleanup some sparse warnings about endian types. * bmi160 - Spare endian warning cleanups. * isl29018 (towards staging graduation) - Remove unusedvariables and defines. - Improve consistency of error handling. - Signed / unsigned comparison fixes. - Use the IIO_DEVICE_ATTR_{RO, RW} macros - Fix a race in in_illuminance_scale_available_show. - Cleanup exit points of _read_raw - Sanity check if in suspended state during a write_raw call as was already done for read_raw. - Document device tree bidnings. - Document infrared supression controls. - Add some newlines to improve readability and drop one that shouldn't be there. - Fix a poorly named functions name. - Fix multiline coment syntax. - Tidy up a pair or return statements by unifying them. - Rename description in Kconfig for consistency with similar drivers. * lidar - cleanup power management by dropping unnecessary call. * ltr501 - Use the claim_direct_mode helpers. Fix a race condition along the way. * max1027 - Fix a dubious x | !y sparse warning. - Use the new iio_trigger_validate_own_device helper. * max440000 - Clean up some sparse warnings about endian types. * mcp4725 - Use the regulator framework to establish the reference voltage rather than getting it from platform data. - Tidy up a comment typo. - Fix a wrong PTR_ERR query (wrong regulator). * mma7660 - Take a mma7660_nscale static. * mma8452 - Use the new iio_trigger_validate_own_device helper. - Use claim_direct_mode helpers - fix a race condition along the way. * mpl3115 - Use claim_direct_mode helpers - fix a race condition along the way. * ms65611 - Tidy up regulator error handling and clean out a static warning in the mix. * sca3000 - Avoid a potential unitialized variable if a hardware read returns a value that isn't actually supported (mostly warning supression). - Fix a use before setting of the indio_dev->buffer pointer. Broken for a very long time so not going to rush this into stable. - Merge buffer file with core file. We used to always split these. Sometimes it's just not worth the hassle. In this case the device's main feature is it's hardware fifos so unlikely anyone would want to run it without. - Drop the sca3000_register_ring_funcs function as it's a pointless wrapper once we have only one file. - Fix cleaning of flag + setting of size of scan. Without this you can't start the buffer twice and expect sensible (or any) results. Again, broken for a long time so not heading for stable. - Drop the custom watershed setting ABI - for now we'll just support one value. - Move to a hybrid hard / soft buffer design (how we've been doing it for similar devices for a while now!) - Cleanup some unusued variables. - Use a fake channel to support core handling of freefall event registration. - Cleanup the register defines. - Fix an off by one error in axis due to IIO_NO_MOD taking up the 0 value. Been broken since first admission of IIO to the staging tree. - Add readback of the 3db low pass filter frequency and later writing allowing droppign of custom measurement mode attributes as they can be represented by the filter choices that is their main characteristic. - Drop non standard revision attr and replace with dev_info on probe. - Avoid a race in probe. - Various formatting fixes. - Kernel-docify docs that were very nearly in the write format. * tsl2583 - Constify attribute_group structure. * zpa2326 - Drop a redundant DEBUG ifdef. Cleanups (Tools) * iio_generic_buffer - Fix the ? arguement. Previously it sort of worked as you got the help message as a result of it not recognising the arguement. -----BEGIN PGP SIGNATURE----- iQIuBAABCAAYBQJYDSX+ERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaIQSEP /2HRMqDXeIh2N0oVLBFK5pEaAZ52tjsEmf1XgfCJ3D1PczS0vzqkFKuG/078BU3v e9MTj39sF1EOyGJv4mdfnHygLPvjaTU/A6HoIaP1t9cUgSQ1jzPN0tO8/Hj/ESlU U3mNgUNUIa9cnVIfWk2cPJqgKJ/w52vRk00yRnOKZjHZkxbYQq9rPJ7ks12jQSGT IBEipiYMnRovc2w4NWbAry5pAXBmttVFKyi5FZ7uIM5EH34+SAY6laXSoZQl8E74 LKgIwdPUn9yeujyX6ohBFRFloOf/4VYedV6NIUz8k5BzuTeAJcp4DSMLXSWIwZVd sdza6el3Tt0MkjIgioTg7N07FvatbQVIsnWnLjLb/zpMjGQPigfTnIi7kYcH3wHx NwpTy1MZg5U571LOYXsEhNvIFiQICoV6+8d/PzrO1J+rphuQYreOm0WzjvIqW4q/ dU2uCAMOHd82gjm9QrKjvrc+4M3oGc3ENE/i5P2YNQhdkdNKp9PMWgL6RO9QXgeQ 9TrjbDr9OSFLatZg5IswWFa5CHL9AZ6OuvaRyx/8n5cBdY3n8+wMIowRQJlMUdGY Aa5ByntMsvhwCu+M1+fDihZyx4suTNvW7+Emqd/8lCb+BRjHoamBb6uGBGx6Txvy 6TPluNWE+cK5Tjkrn+jDbTzhwdaaSRtO4ECRwxXYAqfn =ZRUt -----END PGP SIGNATURE----- Merge tag 'iio-for-4.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of IIO new device support, features and cleanups for the 4.10 cycle. Fair number of outreachy related patches in here. Some of these may well have already been picked up by Greg but git will sort that out for us. Also some good staging cleanup work from other sources. Thanks Brian and Lars in particular for this. New device support * ACCES 104-quad-8 - New driver for this 8 channel encoder input board. Lots of new ABI with this one. * AD7766 - New driver supporting AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1 and AD7767-2 24 bit ADCs. * dmard 10 - New driver for this 3 axis accelerometer. * Honeywell ABP pressure sensors. - New driver covering 56 parts in this series (too many to list here!) * HTS221 - New driver to support this relative humidiy and temperature device. * LMP91000 - New driver for this potentiostat (form of chemical sensor). Nice example of use of the buffered consumer interfaces and the use of a consumer provided trigger. * MiraMEMS DA311 - New driver for this 3 axis accelerometer. * MiraMEMS DA280 - New driver for this 3 axis accelerometer. Follow up caught up with vendor prefixes for these. Staging graduations * isl29018 light sensor - Fixes and cleanups listed below (thanks for your hard work on this Brian!) * sca3000 - Fixes and cleanups listed below. This was one of the small set of drivers that went into staging when IIO was first added. Turns out it had a few bugs and needed to be brought into the modern era! Not clear if I am the only person who actually has one of these still wired to a board. New features (Core) - Add an iio_trigger_validate_own_device helper which relies on the device and trigger having the same parent. Convenient to have this for some of the more complex trigger / device interactions. Was hand rolled in a few drivers already so good to bring it into the core. - Add an iio_read_channel_offset in kernel access helper (similar to the existing one for scale). - IIO_ATTR_{RO, WO, RW} and IIO_DEVICE_ATTR_{RO, WO, RW} macros. These lead some rather contrived function naming, but there is no denying they do reduced boilerplate. I'm going to resist their introduction in drivers 'unless' they form part of a larger set of cleanups. - Counter channel type and index type. New features (Drivers) * hdc100x - Triggered buffer support. * mcp4725 - Device tree bindings and support. - Voltage reference selection. * ti-adc0832 - Triggered buffer support. * ti-adc161s626 - Add regulator support allowing _scale and _offset values to be established and exported. New features (Tools) * iio_generic_buffer - -A option to force enable all channels rather than faulting if some are already enabled (like -a does). Followup patches tidied this support up. Cleanups (Core) - Use kmalloc_array in iio_scan_mask_set. - Take event_attrs field of iio_info structure constant - Staging todo list updates. Most of it was long done. - MAINTAINERS had a wrong directory listing. Cleanups (Drivers) * Missing i2c trivial devices entries. * ad5592r - Fix an endian type related sparse warnings. * ad7150 - Constify the event attribute_group structures. * ad7152 - Add some blank lines to improve readability. - Sampling frequency control via chan-info element rather than hand rolled attributes. - add a new lock to avoid use of mlock for non state change related locking. * ad7280 - Constify atrribute_group structure (second patch covers the event ones) * ad7606 (Lars is driving most of the cleanup on this with some additions from Eva) - Fix improper setting of oversampling pins. This has been broken a very long time in this staging driver, so not going to push this back to stable. - Implement oversampling configuration via the chan_info mask element. - Remove an unused int_vref_mv field. - Remove a reundant name field from ad7606_chip_info. - Remove default device configuration from platform_data in favour of whatever the power on defaults are. - Remove out of band error reporting in the kernel log as not providing much information. - Fix oversampling ratio by having 1 be the value for no oversampling. - Avoid allocating buffer for each data capture. - Factor out common code between periodic and one-shot capture. - Move set_drvdat into common code. - Let the common probe function return int rather than jumping through an ERR_PTR. - Pass struct device * into common remove to simplify code. - Always run trigger handler only once per event (no one can remember why it was being possibly done twice). - Move over to the GPIO descriptor API to shorten and clarify code. - Move the buffer code into the main file as it's not optional and is now rather short in this driver. - Fix the naming of the supply regulator. - Rework regulator handling to handle errors including deferred probing. - Tidy up a ptr_err or 0 return. * ad7746 - Sampling frequency control via info_mask element rather than hand rolled * ad7758 - Sampling frequency control via info_mask element rather than hand rolled attributes. * ad7816 - Constify the event attribute_group structure. * adt7316 - Constify the event attribute group structures. * ak8974 - Cleanup some sparse warnings about endian types. * ak8975 - Cleanup some sparse warnings about endian types. * bmi160 - Spare endian warning cleanups. * isl29018 (towards staging graduation) - Remove unusedvariables and defines. - Improve consistency of error handling. - Signed / unsigned comparison fixes. - Use the IIO_DEVICE_ATTR_{RO, RW} macros - Fix a race in in_illuminance_scale_available_show. - Cleanup exit points of _read_raw - Sanity check if in suspended state during a write_raw call as was already done for read_raw. - Document device tree bidnings. - Document infrared supression controls. - Add some newlines to improve readability and drop one that shouldn't be there. - Fix a poorly named functions name. - Fix multiline coment syntax. - Tidy up a pair or return statements by unifying them. - Rename description in Kconfig for consistency with similar drivers. * lidar - cleanup power management by dropping unnecessary call. * ltr501 - Use the claim_direct_mode helpers. Fix a race condition along the way. * max1027 - Fix a dubious x | !y sparse warning. - Use the new iio_trigger_validate_own_device helper. * max440000 - Clean up some sparse warnings about endian types. * mcp4725 - Use the regulator framework to establish the reference voltage rather than getting it from platform data. - Tidy up a comment typo. - Fix a wrong PTR_ERR query (wrong regulator). * mma7660 - Take a mma7660_nscale static. * mma8452 - Use the new iio_trigger_validate_own_device helper. - Use claim_direct_mode helpers - fix a race condition along the way. * mpl3115 - Use claim_direct_mode helpers - fix a race condition along the way. * ms65611 - Tidy up regulator error handling and clean out a static warning in the mix. * sca3000 - Avoid a potential unitialized variable if a hardware read returns a value that isn't actually supported (mostly warning supression). - Fix a use before setting of the indio_dev->buffer pointer. Broken for a very long time so not going to rush this into stable. - Merge buffer file with core file. We used to always split these. Sometimes it's just not worth the hassle. In this case the device's main feature is it's hardware fifos so unlikely anyone would want to run it without. - Drop the sca3000_register_ring_funcs function as it's a pointless wrapper once we have only one file. - Fix cleaning of flag + setting of size of scan. Without this you can't start the buffer twice and expect sensible (or any) results. Again, broken for a long time so not heading for stable. - Drop the custom watershed setting ABI - for now we'll just support one value. - Move to a hybrid hard / soft buffer design (how we've been doing it for similar devices for a while now!) - Cleanup some unusued variables. - Use a fake channel to support core handling of freefall event registration. - Cleanup the register defines. - Fix an off by one error in axis due to IIO_NO_MOD taking up the 0 value. Been broken since first admission of IIO to the staging tree. - Add readback of the 3db low pass filter frequency and later writing allowing droppign of custom measurement mode attributes as they can be represented by the filter choices that is their main characteristic. - Drop non standard revision attr and replace with dev_info on probe. - Avoid a race in probe. - Various formatting fixes. - Kernel-docify docs that were very nearly in the write format. * tsl2583 - Constify attribute_group structure. * zpa2326 - Drop a redundant DEBUG ifdef. Cleanups (Tools) * iio_generic_buffer - Fix the ? arguement. Previously it sort of worked as you got the help message as a result of it not recognising the arguement.	2016-10-24 11:34:22 +02:00
Tomas Novotny	8b0ee39f4d	Documentation: dt: iio: add mcp4725/6 dac device binding ... Signed-off-by: Tomas Novotny <tomas@novotny.cz> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>	2016-10-23 19:34:22 +01:00
Lorenzo Bianconi	0b0feb3417	Documentation: dt: iio: humidity: add hts221 sensor device binding ... Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>	2016-10-23 19:34:09 +01:00
Linus Torvalds	133d970e0d	Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus ... Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...	2016-10-15 09:26:12 -07:00
Linus Torvalds	b292fb80bb	Updates to the hns drivers ... - Small patch set for hns net driver that the roce patches depend on - Various fixes to the hns-roce driver - Add connection manager support to the hns-roce driver -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJYATZdAAoJELgmozMOVy/d1+4P/2UhXiXx7strrr5vYtFAdbdX 9j4jPbmnXgc4hFV1EET7UScdUwYW6iuoYCYa5sJUj6dcux2Ph/pYfPbE4Civld67 xMEISaI86GcEbFy3yqZ0vhDegyReb6wUDguzht1IHKqFwl5uvXBPJhZ0vmY4ZKXd mVKNLH4FTMbqf4rGO64AmUyN7QIlLE17zO3Nolha6mytRj7RoYHEjP8RbZPTeN5J 58QpZjomO0uz1dvxRWwRBw2eEYgXMxKa3s4W8vYYcGimoKinzbqAHhrWOm0+klHA Nd3AFqEVDTxYxqZYSBLvhvCT4d9/vgb/Tsf+IB07qVDoM6iv2W2WM17xq9w7vitv 4w7tClX9cvAWX35k3TAhQBkN2QJhaWY9bK9JwTB/AFxQXM2gG1/2f77hi72jdsR4 kcptopV/vZSMqjobfoVe5/ac1qUxv7HM+tAN/+9j7qU3TNvn5+R7d+UBDKrbiP1c EW5kdffRY3evemdRh/zHfUyuQzr5l/GR4vQ9gLJIBu+ZK3o1d1JNUjKNwwlzOl0r BbvYvWJ23Na6FTjpNFOTgc3y7K4zSXlGVeHObtqg0ejlWsCU9xu+MMay9tRLy2LI CQxr81WQbMvcEnfad2yqSUuFAAhut85Q3qYERPGDy78aiF+gNNDZLitwmjU3Q9q8 F7apPH39H41lEzOLfsMr =PmmI -----END PGP SIGNATURE----- Merge tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma updates from Doug Ledford: "This merge window was the first where Huawei had to try and coordinate their patches between their net driver and their new roce driver (similar to mlx4 and mlx5). They didn't do horribly, but there were some issues (and we knew that because they simply didn't know what to do in the beginning). As a result, I had a set of patches that depended on some patches that normally would have come to you via Dave's tree. Those patches have been on netdev@ for a while, so I got Dave to give me his approval to send them to you. As such, the other 29 patches I had behind them are also now ready to go. This catches the hns and hns-roce drivers up to current, and for future patches we are working with them to get them up to speed on how to do joint driver development so that they don't have these sorts of cross tree dependency issues again. BTW, Dave gave me permission to add his Acked-by: to the patches against the net tree, but I've had this branch through 0day (but not linux-next since it was off by itself) and I didn't want to rebase the series just to add Dave's ack for the 8 patches in the net area. Updates to the hns drivers: - Small patch set for hns net driver that the roce patches depend on - Various fixes to the hns-roce driver - Add connection manager support to the hns-roce driver" * tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (36 commits) IB/hns: Fix for removal of redundant code IB/hns: Delete the redundant lines in hns_roce_v1_m_qp() IB/hns: Fix the bug when platform_get_resource() exec fail IB/hns: Update the rq head when modify qp state IB/hns: Cq has not been freed IB/hns: Validate mtu when modified qp IB/hns: Some items of qpc need to take user param IB/hns: The Ack timeout need a lower limit value IB/hns: Return bad wr while post send failed IB/hns: Fix bug of memory leakage for registering user mr IB/hns: Modify the init of iboe lock IB/hns: Optimize code of aeq and ceq interrupt handle and fix the bug of qpn IB/hns: Delete the sqp_start from the structure hns_roce_caps IB/hns: Fix bug of clear hem IB/hns: Remove unused parameter named qp_type IB/hns: Simplify function of pd alloc and qp alloc IB/hns: Fix bug of using uninit refcount and free IB/hns: Remove parameters of resize cq IB/hns: Remove unused parameters in some functions IB/hns: Add node_guid definition to the bindings document ...	2016-10-14 13:35:05 -07:00
Linus Torvalds	689f891c98	Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input ... Pull some more input subsystem updates from Dmitry Torokhov: "An update to the ALPS driver to support the V8 protocol with touchstick, a change for i8042 to skip selftest on many Asus laptops which helps to keep their touchpads working after resume, and a couple other driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - skip selftest on ASUS laptops Input: melfas_mip4 - add ic_name sysfs attribute Input: melfas_mip4 - add maintainer information Input: melfas_mip4 - add devicetree binding documentations Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled Input: synaptics-rmi4 - fix error handling in I2C transport driver Input: synaptics-rmi4 - fix error handling in SPI transport driver Input: ALPS - add V8 protocol documentation Input: ALPS - set DualPoint flag for 74 03 28 devices Input: ALPS - allow touchsticks to report pressure Input: ALPS - handle 0-pressure 1F events Input: ALPS - add touchstick support for SS5 hardware Input: elantech - force needed quirks on Fujitsu H760 Input: elantech - fix Lenovo version typo	2016-10-14 13:19:30 -07:00
Linus Torvalds	8b70f71617	RTC for 4.9 ... Subsystem: - delete owner assignment in multiple drivers - constify rtc_class_ops structures Drivers: - ac100: support clock-output-names - cmos: properly handle ACPI alarms and quirky BIOSes and other fixes - ds1307: fix century bit support while staying comaptible with previous behaviour by default - ds1347: switch to regmap - isl12057 is now handled by ds1307 - omap: support external wakeup - rv8803: allow to disable voltage drop detection -----BEGIN PGP SIGNATURE----- iQIcBAABCgAGBQJYASBeAAoJENiigzvaE+LCDO4QAJAi0TV2i0vYaJLDWyCGDx3P cts/Su2JdLgeLxilKvyYgwUpp8fsv681ZaZi+a6Jln/cn0MOcWwJoopiC30CSR8M 9UxmRsFR9Ev/Cm/NZChcsTQwyTHOumnzZzxtnYr0RWOw7s4K68gEQEpWWT7qHTp1 KVwfIvjAIPcozw25QWWGUWHu22PsI38NTH5Bg+rimMCToNbSDFAm+d62cdeIbkJF FoQIut0/Lh5UZ12+T8l0iBydY3bINeo1SZY5yAwQGRzJBecxRccbtKlnUjXnywke xAO5KQzegkLPTU4R6ssK/SQfVlDrfG3fkjWNvUEC/Vyw94v2SaFB1XjvlCXwL3mN XqzWXeestqFvKRjbYsM0NwsPX4+wxjDNq9YaAhpFYDAA9BL3vREB41qf/dCOFywG tqHBRpwN9g7u/72SLJ3icYdjmpaQIQbLF9wl8LJiPrWn4xwTNVIB2u3APcSuxE7/ q49jD72LyEVhOUyGs0Hev584s4PC2fMoveq52ng0gMVbOtX0A0FJQQMcR2/2DIOp GLzPVuupx/8Eck9RFdr06Iv74j/bD7tScfiifZt6LfY5c8K7HOYykoskaRz3XMV4 gx7Aajb8+jMVvI2TOthIa/WCXktQ8MBWTMZ6vbCxxpIRPBYuDqKmt1hXsYR5s6ql fMrn+tWltdRQKGIF2GrR =ZqqR -----END PGP SIGNATURE----- Merge tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.9 Subsystem: - delete owner assignment in multiple drivers - constify rtc_class_ops structures Drivers: - ac100: support clock-output-names - cmos: properly handle ACPI alarms and quirky BIOSes and other fixes - ds1307: fix century bit support while staying comaptible with previous behaviour by default - ds1347: switch to regmap - isl12057 is now handled by ds1307 - omap: support external wakeup - rv8803: allow to disable voltage drop detection" * tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (25 commits) rtc: rv8803: set VDETOFF and SWOFF via device tree dt/bindings: Add bindings for Micro Crystal rv8803 devicetree: Add Micro Crystal AG vendor id rtc: cmos: avoid unused function warning rtc: ac100: Add NULL checking for devm_kzalloc call rtc: ds1347: changed raw spi calls to register map calls rtc: cmos: Restore alarm after resume rtc: cmos: Clear ACPI-driven alarms upon resume rtc: omap: Support ext_wakeup configuration rtc: cmos: Initialize hpet timer before irq is registered rtc: asm9260: rework locking rtc: asm9260: allow COMPILE_TEST rtc: constify rtc_class_ops structures rtc: ac100: support clock-output-names in device tree binding rtc: rx6110: remove owner assignment rtc: pic32: Delete owner assignment rtc: bq32k: Fix handling of oscillator failure flag rtc: bq32k: Use correct mask name for 'minutes' register. rtc: sysfs: fix a cast removing the const attribute Documentation: dt: Intersil isl12057 is not a trivial device ...	2016-10-14 13:13:44 -07:00
Linus Torvalds	e5050143d6	Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux ... Pull more i2c updates from Wolfram Sang: "A small update pull request from I2C. This adds one comment to a change we did in this merge window to handle lockdep better, and pulls in a branch which should have been in 4.8 already improving DT support for I2C" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: gpio: pca953x: add a comment explaining the need for a lockdep subclass i2c: core: Add support for 'i2c-bus' subnode dt-bindings: i2c: Add support for 'i2c-bus' subnode	2016-10-14 13:09:41 -07:00
Dmitry Torokhov	1134ca268e	Merge branch 'next' into for-linus ... Prepare second round of input updates for 4.9 merge window.	2016-10-13 17:23:40 -07:00
Linus Torvalds	e3799a210d	Merge git://www.linux-watchdog.org/linux-watchdog ... Pull watchdog updates from Wim Van Sebroeck: - a new watchdog pretimeout governor framework - support to upload the firmware on the ziirave_wdt - several fixes and cleanups * git://www.linux-watchdog.org/linux-watchdog: (26 commits) watchdog: imx2_wdt: add pretimeout function support watchdog: softdog: implement pretimeout support watchdog: pretimeout: add pretimeout_available_governors attribute watchdog: pretimeout: add option to select a pretimeout governor in runtime watchdog: pretimeout: add panic pretimeout governor watchdog: pretimeout: add noop pretimeout governor watchdog: add watchdog pretimeout governor framework watchdog: hpwdt: add support for iLO5 fs: compat_ioctl: add pretimeout functions for watchdogs watchdog: add pretimeout support to the core watchdog: imx2_wdt: use preferred BIT macro instead of open coded values watchdog: st_wdt: Remove support for obsolete platforms watchdog: bindings: Remove obsolete platforms from dt doc. watchdog: mt7621_wdt: Remove assignment of dev pointer watchdog: rt2880_wdt: Remove assignment of dev pointer watchdog: constify watchdog_ops structures watchdog: tegra: constify watchdog_ops structures watchdog: iTCO_wdt: constify iTCO_wdt_pm structure watchdog: cadence_wdt: Fix the suspend resume watchdog: txx9wdt: Add missing clock (un)prepare calls for CCF ...	2016-10-13 16:44:20 -07:00
Linus Torvalds	b67be92feb	pwm: Changes for v4.9-rc1 ... This set of changes contains support for PWM signal capture in the STi driver as well as support for the PWM controller found on Meson SoCs. There's also support added for the MediaTek MT2701 and SunXi H3 to the existing drivers. Other than that there's a fair set of miscellaneous cleanups and fixes across the board. -----BEGIN PGP SIGNATURE----- iQI2BAABCAAgBQJX/m1uGRx0aGllcnJ5LnJlZGluZ0BnbWFpbC5jb20ACgkQ3SOs 138+s6F76A/9HEvXeewRbdFtojihaCba0Qqg39wzHGwwmiEDlqITY/91+vwXidju w58wGtLDtFVFgwv2ACoKuEM2Hck6Xj8Uvz7U2ZHpEY9Grg1V0qoRxLIQAqxyeSvg yCpgYQWc3A0eDD8gvxdpqimbRDm/nflA/OCrbh0duaQD1aT1zaldYqeB/NyT4qcC OX8ulP6bd9BoD0gfUPs6kbs/6kq5rKrhhcfz51K76+YV6yjuwi4B0aCsBR5XveX0 Qc+nyJ1TdgycxkMooIN3lFRYdk/HGVA8/D/UUzKAPT8L0/yYwGL3Bz0R4W38tdEY fmxuq7N3K5ZUNgfhilG8dR4wSyx9rkjVvClbrd83ZhsZ2v8diq7oW30TFecs9ygB Fs8l/ZCXEw9SPcizlaNLhV/LPu7WGuj3ooHVaK6SBMBTqjuDOM38PtKlS7tqIVqF joioboQbw59n6mn7muSpcOLVsLWUWhAV8zRs7ekahpO9dzfphFpqkEBep3VCMJY6 fhxyPR0XythLnpymnxFYdSbJxuSoEZd0kMLAeTV82lj7/+6f+EYNEepG3M2plOQc EyS0nSZ2qUCk4ZCco0bsBsg9ZbIMfC3FIk/P1m2EdhobuL3/2goNZqhnECjKHPWg qMCanJDb6Pj/RlbCQVIUey1eRYm3TxBOY9tAHQOhHo8zF2pvh5rbHqA= =KuVk -----END PGP SIGNATURE----- Merge tag 'pwm/for-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes contains support for PWM signal capture in the STi driver as well as support for the PWM controller found on Meson SoCs. There's also support added for the MediaTek MT2701 and SunXi H3 to the existing drivers. Other than that there's a fair set of miscellaneous cleanups and fixes across the board" * tag 'pwm/for-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits) pwm: meson: Handle unknown ID values pwm: sti: Take the opportunity to conduct a little house keeping pwm: sti: It's now valid for number of PWM channels to be zero pwm: sti: Add PWM capture callback pwm: sti: Add support for PWM capture interrupts pwm: sti: Initialise PWM capture device data pwm: sti: Supply PWM Capture clock handling pwm: sti: Supply PWM capture register addresses and bit locations pwm: sti: Only request clock rate when needed pwm: sti: Reorganise register names in preparation for new functionality pwm: sti: Rename channel => device dt-bindings: pwm: sti: Update DT bindings for capture support pwm: lpc-18xx: use pwm_set_chip_data pwm: sunxi: Add H3 support pwm: Add support for Meson PWM Controller dt-bindings: pwm: Add bindings for Meson PWM Controller pwm: samsung: Fix to use lowest div for large enough modulation bits pwm: pwm-tipwmss: Remove all runtime PM gets/puts pwm: cros-ec: Add __packed to prevent padding pwm: Add MediaTek MT2701 display PWM driver support ...	2016-10-12 11:11:05 -07:00
Linus Torvalds	2d2474a194	Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux ... Pull thermal managament updates from Zhang Rui: - Enhance thermal "userspace" governor to export the reason when a thermal event is triggered and delivered to user space. From Srinivas Pandruvada - Introduce a single TSENS thermal driver for the different versions of the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for msm8916, msm8960, msm8974 and msm8996 families is also added. From Rajendra Nayak - Introduce hardware-tracked trip points support to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is changed, the trip points immediately below and above the current temperature are found, driver callback is invoked to program the hardware to get notified when either of the two trip points are triggered. Hardware-tracked trip points support for rockchip thermal driver is also added at the same time. From Sascha Hauer, Caesar Wang - Introduce a new thermal driver, which enables TMU (Thermal Monitor Unit) on QorIQ platform. From Jia Hongtao - Introduce a new thermal driver for Maxim MAX77620. From Laxman Dewangan - Introduce a new thermal driver for Intel platforms using WhiskeyCove PMIC. From Bin Gao - Add mt2701 chip support to MTK thermal driver. From Dawei Chien - Enhance Tegra thermal driver to enable soctherm node and set "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei Ni - Add resume support for tango thermal driver. From Marc Gonzalez - several small fixes and improvements for rockchip, qcom, imx, rcar, mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy, Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh Kang * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits) thermal: int3403: Process trip change notification thermal: int340x: New Interface to read trip and notify thermal: user_space gov: Add additional information in uevent thermal: Enhance thermal_zone_device_update for events arm64: tegra: set hot trips for Tegra210 arm64: tegra: set critical trips for Tegra210 arm64: tegra: add soctherm node for Tegra210 arm64: tegra: set hot trips for Tegra132 arm64: tegra: set critical trips for Tegra132 arm64: tegra: use tegra132-soctherm for Tegra132 arm: tegra: set hot trips for Tegra124 arm: tegra: set critical trips for Tegra124 thermal: tegra: add hw-throttle for Tegra132 thermal: tegra: add hw-throttle function of: Add bindings of hw throttle for Tegra soctherm thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register thermal: Add Mediatek thermal driver for mt2701. dt-bindings: thermal: Add binding document for Mediatek thermal controller thermal: max77620: Add thermal driver for reporting junction temp thermal: max77620: Add DT binding doc for thermal driver ...	2016-10-12 11:05:23 -07:00
Oleksij Rempel	eff6675b5c	dt/bindings: Add bindings for Micro Crystal rv8803 ... ... and Epson RX8900 real time clock Signed-off-by: Oleksij Rempel <fixed-term.Oleksij.Rempel@de.bosch.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>	2016-10-12 13:24:34 +02:00
Oleksij Rempel	0f2065177b	devicetree: Add Micro Crystal AG vendor id ... Add Micro Crystal AG vendor id Signed-off-by: Oleksij Rempel <fixed-term.Oleksij.Rempel@de.bosch.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>	2016-10-12 13:24:25 +02:00
Linus Torvalds	6b25e21fa6	Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux ... Pull drm updates from Dave Airlie: "Core: - Fence destaging work - DRIVER_LEGACY to split off legacy drm drivers - drm_mm refactoring - Splitting drm_crtc.c into chunks and documenting better - Display info fixes - rbtree support for prime buffer lookup - Simple VGA DAC driver Panel: - Add Nexus 7 panel - More simple panels i915: - Refactoring GEM naming - Refactored vma/active tracking - Lockless request lookups - Better stolen memory support - FBC fixes - SKL watermark fixes - VGPU improvements - dma-buf fencing support - Better DP dongle support amdgpu: - Powerplay for Iceland asics - Improved GPU reset support - UVD/VEC powergating support for CZ/ST - Preinitialised VRAM buffer support - Virtual display support - Initial SI support - GTT rework - PCI shutdown callback support - HPD IRQ storm fixes amdkfd: - bugfixes tilcdc: - Atomic modesetting support mediatek: - AAL + GAMMA engine support - Hook up gamma LUT - Temporal dithering support imx: - Pixel clock from devicetree - drm bridge support for LVDS bridges - active plane reconfiguration - VDIC deinterlacer support - Frame synchronisation unit support - Color space conversion support analogix: - PSR support - Better panel on/off support rockchip: - rk3399 vop/crtc support - PSR support vc4: - Interlaced vblank timing - 3D rendering CPU overhead reduction - HDMI output fixes tda998x: - HDMI audio ASoC support sunxi: - Allwinner A33 support - better TCON support msm: - DT binding cleanups - Explicit fence-fd support sti: - remove sti415/416 support etnaviv: - MMUv2 refactoring - GC3000 support exynos: - Refactoring HDMI DCC/PHY - G2D pm regression fix - Page fault issues with wait for vblank There is no nouveau work in this tree, as Ben didn't get a pull request in, and he was fighting moving to atomic and adding mst support, so maybe best it waits for a cycle" * tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits) drm/crtc: constify drm_crtc_index parameter drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next drm/i915/guc: Unwind GuC workqueue reservation if request construction fails drm/i915: Reset the breadcrumbs IRQ more carefully drm/i915: Force relocations via cpu if we run out of idle aperture drm/i915: Distinguish last emitted request from last submitted request drm/i915: Allow DP to work w/o EDID drm/i915: Move long hpd handling into the hotplug work drm/i915/execlists: Reinitialise context image after GPU hang drm/i915: Use correct index for backtracking HUNG semaphores drm/i915: Unalias obj->phys_handle and obj->userptr drm/i915: Just clear the mmiodebug before a register access drm/i915/gen9: only add the planes actually affected by ddb changes drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED drm/i915/bxt: Fix HDMI DPLL configuration drm/i915/gen9: fix the watermark res_blocks value drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations drm/i915/gen9: minimum scanlines for Y tile is not always 4 drm/i915/gen9: fix the WaWmMemoryReadLatency implementation drm/i915/kbl: KBL also needs to run the SAGV code ...	2016-10-11 18:12:22 -07:00
Wolfram Sang	b2edcdae3d	i2c: 'i2c-bus' node support for v4.8-rc1 ... This includes the device tree binding and I2C core changes to support the i2c-bus subnode that I2C masters can use to describe their slaves in a separate namespace and therefore avoid clashing with potentially other subnodes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJXdn2gAAoJEN0jrNd/PrOhe94P/j+1I3iGpHcU/mNmCaqgit9z TLMehmgglf9kj0iXpYoBjYU/XxzRKBfOaceRrPj16V9GbhiKGcHX0fhH06zydczS ZPS5FBNGqH9C6WYe8oszTBWz5skulSQba6VUwG01MnT2Nv7z7ONcHB2HPjM6TKob D0dxN4U3BlfTCGd/FxJariork2xY8o8mKZN7pntkJ+hQNeengCXXoPaY2bGSFH4K omfUal8/tdPZAruMaA/Dmvu9jBv0RkVSQzNnHXNkGzAw3fAsYm1UzcpG4VNhgeyj XNFiedIFOls8KW2Xd0LdPAzpyafS4w4gBj2SOol0xpUFhA9CchZCzci7DI2NSj9A VpiZzBPt6I+zv9c2HdzRqjH2PZTRoy0c9/szCBWyabZ/tST3SWk/tBY5SoLYpmL7 Jq/sOWtegpGvj2XRw8jhmxXVjXYzqzAbyo6SrINZs8ElFrWZxTgsVHmq2SVE5qvh DnIpr7y/gfKyqAynm0QshNCo5kauvSX4Pa55MfEB/7GfkqhvYzjg+nlplut9woSG +JN3dWS5tts9pqzHWVL4YY/S11Dx+pT6ZPkmprjMAN+ghxNWjEhA57q7FxAHTU83 BsermHINCpCcN/zyLGDXSaJbJq9hH5LLCHA23ZfnWtOFC5zikp1TG325A/2WMnwb ovKSLXRScyVqliffmO8G =+0Q/ -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.8-i2c' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into i2c/for-next [wsa: fell through the cracks, applied to 4.9 now] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> i2c: 'i2c-bus' node support for v4.8-rc1 This includes the device tree binding and I2C core changes to support the i2c-bus subnode that I2C masters can use to describe their slaves in a separate namespace and therefore avoid clashing with potentially other subnodes.	2016-10-11 23:37:26 +02:00
Linus Torvalds	de34f4da7f	media updates for v4.9-rc1 ... -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJX/QbjAAoJEAhfPr2O5OEVDKkP/30o73ZhzBkDR3xgApbmVdrw 1NQYZq8UKibZ87hv949535N3lwaHFV0mA8ylheu2MMArd1GoZvyXKqNbJN9316kQ mSI8wVK77UiBP7RRolEepCuliQExNmayUm+kNZEZsF67+flilkcumCBqlPf114Sl ruhpGTSAIz2mgbxGsPkFiN+4xl2AZFOjiiHsp9doBE8HAtEp3PyCrPv5T6zkK7PQ KKf7ribcIB65tx0zBmhkfJOef/mqK/t7XgQS7kVRB3G4zr1nkh4g2iw/QbUreBtE 94p1VYAMBFfpCNe1rWaaBOxYRLsDBMQHz2LvOvj8HZKrsuBCKQQ4jAoYQ4bNi8cu nWAb5Z19npoxJRYCGrPs8MJtCFD1IoT4zjiA8Ld5BT4SqBsCQ6VrgiUpQESzjtlj Xp7V1D2ak3vx40FAuDGZsb7JwGTuIrK18rZyKSjvHbnydWiJlaHY9kR3lOe91wc2 MZOiD3K4lM5Lvse07nLVgOTjXW1fC3ScliRCQVLU/Wbm6A8UKiejES8sy0bFk9sU 8Go3RaAPVeQLGFLqOJG+6yu7sJ1FCZzAthKbpxtY8p/iKZE4QO0n4Y6Q2NjcjHJt lDKYp83jne+AMthbLR+Ab6IL2GoOxaW6fnTrDioDxGc9Cvba90xYsZCIxbcGrM4h cu1bOLUp5Ei1wHvaqRla =JqCR -----END PGP SIGNATURE----- Merge tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation improvements: conversion of all non-DocBook documents to Sphinx and lots of fixes to the uAPI media book - New PCI driver for Techwell TW5864 media grabber boards - New SoC driver for ATMEL Image Sensor Controller - Removal of some obsolete SoC drivers (s5p-tv driver and soc_camera drivers) - Addition of ST CEC driver - Lots of drivers fixes, improvements and additions * tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits) [media] ttusb_dec: avoid the risk of go past buffer [media] cx23885: Fix some smatch warnings [media] si2165: switch to regmap [media] si2165: use i2c_client->dev instead of i2c_adapter->dev for logging [media] si2165: Remove legacy attach [media] cx231xx: attach si2165 driver via i2c_client [media] cx231xx: Prepare for attaching new style i2c_client DVB demod drivers [media] cx23885: attach si2165 driver via i2c_client [media] si2165: support i2c_client attach [media] si2165: avoid division by zero [media] rcar-vin: add R-Car gen2 fallback compatibility string [media] lgdt3306a: remove 20*50 msec unnecessary timeout [media] cx25821: Remove deprecated create_singlethread_workqueue [media] cx25821: Drop Freeing of Workqueue [media] cxd2841er: force 8MHz bandwidth for DVB-C if specified bw not supported [media] redrat3: hardware-specific parameters [media] redrat3: remove hw_timeout member [media] cxd2841er: BER and SNR reading for ISDB-T [media] dvb-usb: avoid link error with dib3000m{b,c| [media] dvb-usb: split out common parts of dibusb ...	2016-10-11 13:22:22 -07:00
Linus Torvalds	56e520c7a0	IOMMU Updates for Linux v4.9 ... Including: * Support for interrupt virtualization in the AMD IOMMU driver. These patches were shared with the KVM tree and are already merged through that tree. * Generic DT-binding support for the ARM-SMMU driver. With this the driver now makes use of the generic DMA-API code. This also required some changes outside of the IOMMU code, but these are acked by the respective maintainers. * More cleanups and fixes all over the place. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJX/PmUAAoJECvwRC2XARrjyloP/1hymxXC2yXZ4EIBTHSO5X+c jSJaGTIbQAdQDpllscSNJ0Au43L3vGtJcHo4JqwEERNlwLsU82LH7QJhq+q1La/b 5cPaY5gI3E++qxQt8umuZJAIUQthFYrfGoS5lJc5t5r/d8iVsLWbW4VkR19/1o7A 4/Uz7ETmi9VVy8Hkvumx+PQ0VHJet381KB7ud9LU5Spim0En2AAGwZXLMkmxXd2W uDQ+O1rlDVc2/ka3+GmfZEml5EASWRqS/MTNoU/ZbQGYWKCWygXbuiqt6gLudWjx dCR1Knh68b0gN6k/QAj8XY/1gkfmZ3YkfS0AHIMLYTFRT51BuxOrkXrBdkYnWEBv UirmaiV87SlR1j83yb3ZmjpBPvd2sGWYFDqY1P0riLutjGUS6zycWWs13olvbfbz SFrH7PT7JPQGYprI1oVn4ihszjN1NZ4+Gj7QBhyFW6FtvqTzmaFVsMOlDIeg1FwR k8cOzov4NG33Bp4IpsHK8e0/qV6K3oJOiOQgCyQp9kPKK+UWv9v9+HaEA7npJuRV c+lTE6j3G4LjEoVybkqm8TiPKxTMVNjUjgA3kwB2yNkCQT7hTCNYIAFrtfCYjYdo B1dnFE7feVqtoimnu2qvkVs59hWlF7Hc3RRHoBxMmO8DLwl9n2OcmoQIeCTsviss i9aNwC9bzBs+Hd3X/psB =1hFE -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - support for interrupt virtualization in the AMD IOMMU driver. These patches were shared with the KVM tree and are already merged through that tree. - generic DT-binding support for the ARM-SMMU driver. With this the driver now makes use of the generic DMA-API code. This also required some changes outside of the IOMMU code, but these are acked by the respective maintainers. - more cleanups and fixes all over the place. * tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (40 commits) iommu/amd: No need to wait iommu completion if no dte irq entry change iommu/amd: Free domain id when free a domain of struct dma_ops_domain iommu/amd: Use standard bitmap operation to set bitmap iommu/amd: Clean up the cmpxchg64 invocation iommu/io-pgtable-arm: Check for v7s-incapable systems iommu/dma: Avoid PCI host bridge windows iommu/dma: Add support for mapping MSIs iommu/arm-smmu: Set domain geometry iommu/arm-smmu: Wire up generic configuration support Docs: dt: document ARM SMMU generic binding usage iommu/arm-smmu: Convert to iommu_fwspec iommu/arm-smmu: Intelligent SMR allocation iommu/arm-smmu: Add a stream map entry iterator iommu/arm-smmu: Streamline SMMU data lookups iommu/arm-smmu: Refactor mmu-masters handling iommu/arm-smmu: Keep track of S2CR state iommu/arm-smmu: Consolidate stream map entry state iommu/arm-smmu: Handle stream IDs more dynamically iommu/arm-smmu: Set PRIVCFG in stage 1 STEs iommu/arm-smmu: Support non-PCI devices with SMMUv3 ...	2016-10-11 12:52:41 -07:00
Brian Masney	88efa2baf1	staging: iio: isl29018: document device tree bindings ... Fix the following warnings from checkpatch: WARNING: DT compatible string "isil,isl29018" appears un-documented -- check ./Documentation/devicetree/bindings/ WARNING: DT compatible string "isil,isl29023" appears un-documented -- check ./Documentation/devicetree/bindings/ WARNING: DT compatible string "isil,isl29035" appears un-documented -- check ./Documentation/devicetree/bindings/ Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>	2016-10-11 19:40:26 +01:00
Hans de Goede	eceb04609b	dt: bindings: vendor-prefix: Add 3 accelerometer vendor prefixes ... Recently the kernel has gotten support in the iio subsystem for a number of new accelerometers from mCube, Memsic and MiraMEMS. This commit adds the vendor prefixes already used for these vendors in Documentation/devicetree/bindings/i2c/trivial-devices.txt to vendor-prefixes.txt. The "full" company names were taken from the company's websites: http://www.mcubemems.com/ http://www.memsic.com/ http://www.miramems.com/en/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>	2016-10-11 19:40:25 +01:00
Hans de Goede	f225951dbb	iio: accel: Add driver for the MiraMEMS DA280 3-axis 14-bit digital accelerometer ... Add an iio driver for the MiraMEMS DA280 3-axis 14-bit accelerometer, as well as for the DA226 which is a fully compatible 2-axis version. Datasheets for the DA280 and DA226 can be found at the manufacturers site: http://www.miramems.com/en/products.asp?list=1 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>	2016-10-11 19:40:15 +01:00
Hans de Goede	598893e9cb	iio: accel: Add driver for the MiraMEMS DA311 3-axis 12-bit digital accelerometer ... This driver is based on the DA311 Android driver which can be found here: 1e70113a5b/drivers/amlogic/input/sensor the mir3da_* files are the DA311 driver. Unfortunately there is no datasheet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>	2016-10-11 19:39:14 +01:00
Hans de Goede	569906e203	iio: accel: Add driver for dmard10 3-axis Accelerometer ... Add a driver for the Domintech ARD10 3-axis Accelerometer, based on the android driver found here: https://github.com/domintech/dmard10 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>	2016-10-11 19:38:32 +01:00
Hans de Goede	34cf779d3c	dt: bindings: i2c/trivial-devices.txt: Add 2 iio supported accelerometers ... Add compatible strings for 2 accelerometers which follow the trivial i2c device bindings and have been supported by the iio subsystem for a while now. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>	2016-10-11 19:38:08 +01:00
Linus Torvalds	6b5e09a748	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net ... Pull networking fixes from David Miller: 1) Netfilter list handling fix, from Linus. 2) RXRPC/AFS bug fixes from David Howells (oops on call to serviceless endpoints, build warnings, missing notifications, etc.) From David Howells. 3) Kernel log message missing newlines, from Colin Ian King. 4) Don't enter direct reclaim in netlink dumps, the idea is to use a high order allocation first and fallback quickly to a 0-order allocation if such a high-order one cannot be done cheaply and without reclaim. From Eric Dumazet. 5) Fix firmware download errors in btusb bluetooth driver, from Ethan Hsieh. 6) Missing Kconfig deps for QCOM_EMAC, from Geert Uytterhoeven. 7) Fix MDIO_XGENE dup Kconfig entry. From Laura Abbott. 8) Constrain ipv6 rtr_solicits sysctl values properly, from Maciej Żenczykowski. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) netfilter: Fix slab corruption. be2net: Enable VF link state setting for BE3 be2net: Fix TX stats for TSO packets be2net: Update Copyright string in be_hw.h be2net: NCSI FW section should be properly updated with ethtool for BE3 be2net: Provide an alternate way to read pf_num for BEx chips wan/fsl_ucc_hdlc: Fix size used in dma_free_coherent() net: macb: NULL out phydev after removing mdio bus xen-netback: make sure that hashes are not send to unaware frontends Fixing a bug in team driver due to incorrect 'unsigned int' to 'int' conversion MAINTAINERS: add myself as a maintainer of xen-netback ipv6 addrconf: disallow rtr_solicits < -1 Bluetooth: btusb: Fix atheros firmware download error drivers: net: phy: Correct duplicate MDIO_XGENE entry ethernet: qualcomm: QCOM_EMAC should depend on HAS_DMA and HAS_IOMEM net: ethernet: mediatek: remove hwlro property in the device tree net: ethernet: mediatek: get hw lro capability by the chip id instead of by the dtsi net: ethernet: mediatek: get the chip id by ETHDMASYS registers net: bgmac: Fix errant feature flag check netlink: do not enter direct reclaim from netlink_dump() ...	2016-10-11 08:10:19 -07:00
Linus Torvalds	35ff96dfd3	MTD updates for 4.9-rc1 ... NAND: * Add the infrastructure to automate NAND timings configuration * Provide a generic DT property to maximize ECC strength * Some refactoring in the core bad block table handling, to help with improving some of the logic in error cases. * Minor cleanups and fixes MTD: * Add APIs for handling page pairing; this is necessary for reliably supporting MLC and TLC NAND flash, where paired-page disturbance affects reliability. Upper layers (e.g., UBI) should make use of these in the near future. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJX+cr9AAoJEFySrpd9RFgtSmcP/AvaNRXlrmKbZKg07kpJj3Ja XtxhftUwz7ncbjls99TD6ObGxWThIJ8U3oLsI5yoofJWiik5KaUk4jXUIVkGF5hm m1cDUX4biCwctdJzG03jboquFgwKP/atxxFCvEigauW3EafmUL4KrkrQ/bqOu7qN TDDyDL2K+v96lR2lYhCxWMZHcwK2ORGxbxdxfTqVE/NMLk217gHcrJEfJISPodfb A9dU/h7gLYF49E5L04Cko1I5HTnyhGPjQGIB/h8dIUlxtrzy1NRGG3IYo5gkdbve 7yRSzbQB0jokcFdz1kg2SLXJZRArs9pYWUkFGGnYFaDGuFentyySaKgs+SO9gJHG wY48IL+RFlR0PF2PKVSdXLf9vgcjoVg9Oi2X5Ap4QJDZaTQqf0P0uz4aRTUbphQx /zY6X4Z6DWUXmLncz2tJ+ruwGoEZaUdXvX3/2ov0UnDjZ+w8hGuNNscE6xrrnKGf S9qiGOkxamS1Sg+jy2IWb/KBkkZgDXRkt02HecPJtV6kkA0fyLe281FiQU2/BHsb +aPA2zavaNMY+UGSkPci2kMZ0lMuIWxTDmH1L1XnscLsowHGrPd9D04zdeZNEP74 mSnMrldlCt8xWD3xKV6Knh9AgPkXCB9MrsumrG9/RTpplnvEAPfic2YU7hRftKkn BJZXNhX1pg4qqhcHT0O5 =/PuY -----END PGP SIGNATURE----- Merge tag 'for-linus-20161008' of git://git.infradead.org/linux-mtd Pull MTD updates from Brian Norris: "I've not been very active this cycle, so these are mostly from Boris, for the NAND flash subsystem. NAND: - Add the infrastructure to automate NAND timings configuration - Provide a generic DT property to maximize ECC strength - Some refactoring in the core bad block table handling, to help with improving some of the logic in error cases. - Minor cleanups and fixes MTD: - Add APIs for handling page pairing; this is necessary for reliably supporting MLC and TLC NAND flash, where paired-page disturbance affects reliability. Upper layers (e.g., UBI) should make use of these in the near future" * tag 'for-linus-20161008' of git://git.infradead.org/linux-mtd: (35 commits) mtd: nand: fix trivial spelling error mtdpart: Propagate _get/put_device() mtd: nand: Provide nand_cleanup() function to free NAND related resources mtd: Kill the OF_MTD Kconfig option mtd: nand: mxc: Test CONFIG_OF instead of CONFIG_OF_MTD mtd: nand: Fix nand_command_lp() for 8bits opcodes mtd: nand: sunxi: Support ECC maximization mtd: nand: Support maximizing ECC when using software BCH mtd: nand: Add an option to maximize the ECC strength mtd: nand: mxc: Add timing setup for v2 controllers mtd: nand: mxc: implement onfi get/set features mtd: nand: sunxi: switch from manual to automated timing config mtd: nand: automate NAND timings selection mtd: nand: Expose data interface for ONFI mode 0 mtd: nand: Add function to convert ONFI mode to data_interface mtd: nand: convert ONFI mode into data interface mtd: nand: Introduce nand_data_interface mtd: nand: Create a NAND reset function mtd: nand: remove unnecessary 'extern' from function declarations MAINTAINERS: Add maintainer entry for Ingenic JZ4780 NAND driver ...	2016-10-10 17:39:51 -07:00
Maxime Ripard	56fe8b6f49	drm/bridge: Add RGB to VGA bridge support ... Some boards have an entirely passive RGB to VGA bridge, based on DACs implemented by resistor ladders. Those might or might not have an i2c bus routed to the VGA connector in order to access the screen EDIDs. Add a bridge that doesn't do anything but expose the modes available on the screen, either based on the EDIDs if available, or based on the XGA standards. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160930143709.1388-3-maxime.ripard@free-electrons.com	2016-10-10 10:58:44 +05:30
Linus Torvalds	b9044ac829	Merge of primary rdma-core code for 4.9 ... - Updates to mlx5 - Updates to mlx4 (two conflicts, both minor and easily resolved) - Updates to iw_cxgb4 (one conflict, not so obvious to resolve, proper resolution is to keep the code in cxgb4_main.c as it is in Linus' tree as attach_uld was refactored and moved into cxgb4_uld.c) - Improvements to uAPI (moved vendor specific API elements to uAPI area) - Add hns-roce driver and hns and hns-roce ACPI reset support - Conversion of all rdma code away from deprecated create_singlethread_workqueue - Security improvement: remove unsafe ib_get_dma_mr (breaks lustre in staging) -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJX+AwSAAoJELgmozMOVy/d0WkQAKxPzVccMWwHv28iZI4ey13u JwE+VoCNpCAZAVuEgzK5zzFdNHPvAk2jU93H4apA7dfXJBXPatVuj9Lnk+ieEEnW tbFwJjBpbQ3Zol3+SPfAHnsVMbtax+xmd6WDKExPXXEDl1L6rutwL3KKfmgWEitg ysX7XOJCiSdyM0hcg4T6UPB9a3jGPff9NLu0oGamV+yoUk5Y0WGoVFxHZ4MKcw8t OkFBYIxGz4SGwq2tulStuH03HteURX594KngtrA8dyq6l1R2GlGRv+bkJAUEIWUv aA0ow3VWusOM6fT+jLXPCv8iUwIXM8tR/U6F7X+cmORUUtWvCl+uCUVid113j/aN BK+Af2nJnfoJ5cDBPsD+bC76l5gQycNZO/Qh8op2kmgJtD+6OpGM3cBXsHx53+kk 0wloJ2lKCGShWxNj+ig8n8rR/rhhs/x3vV3ouCVWNMbOUgOSN3eYHxmK3wGFW4nd Qx+WYCjj9Yi/J6nmUDcfEQ4NWPR22Q2+0ENAabfhLhV6mDloAO5ILHd4GDqC3IA9 UtxlVjf4ZonaiLnTQQzCnDMGVVk6tT8FJ9D42s0ScwjbdYwjyCW9/rs/g2EhcprR Cc+AmjqLviCWGtzBSFO0SijqQon8lcQOwdLw61CdFFvPa/mlLdf1rbx9ArIyNVKn JSrbr3CGyoqyYj6qaEO5 =LC+S -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull main rdma updates from Doug Ledford: "This is the main pull request for the rdma stack this release. The code has been through 0day and I had it tagged for linux-next testing for a couple days. Summary: - updates to mlx5 - updates to mlx4 (two conflicts, both minor and easily resolved) - updates to iw_cxgb4 (one conflict, not so obvious to resolve, proper resolution is to keep the code in cxgb4_main.c as it is in Linus' tree as attach_uld was refactored and moved into cxgb4_uld.c) - improvements to uAPI (moved vendor specific API elements to uAPI area) - add hns-roce driver and hns and hns-roce ACPI reset support - conversion of all rdma code away from deprecated create_singlethread_workqueue - security improvement: remove unsafe ib_get_dma_mr (breaks lustre in staging)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits) staging/lustre: Disable InfiniBand support iw_cxgb4: add fast-path for small REG_MR operations cxgb4: advertise support for FR_NSMR_TPTE_WR IB/core: correctly handle rdma_rw_init_mrs() failure IB/srp: Fix infinite loop when FMR sg[0].offset != 0 IB/srp: Remove an unused argument IB/core: Improve ib_map_mr_sg() documentation IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets IB/mthca: Move user vendor structures IB/nes: Move user vendor structures IB/ocrdma: Move user vendor structures IB/mlx4: Move user vendor structures IB/cxgb4: Move user vendor structures IB/cxgb3: Move user vendor structures IB/mlx5: Move and decouple user vendor structures IB/{core,hw}: Add constant for node_desc ipoib: Make ipoib_warn ratelimited IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue IB/ipoib: Remove deprecated create_singlethread_workqueue ...	2016-10-09 17:04:33 -07:00
Linus Torvalds	c913fc4146	ARM: SoC: late DT updates for v4.9 ... These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAV/gzeGCrR//JCVInAQKVhw/5AS5R2S7m7VTlWMvGjvH9ITudYhiAGJP1 z5nP5SwJsfmSjfvw0kSxGUmsNS3rHutsPMz65EesKqFuC3LPZiqMUqrzxt9iqqJx I+XdAxDTnOE1RBZFtB9dL+qLzHQ87pMo6R9dfs32sxb3QuCQBYhcFyLmQDuZuHH0 yeDi3ARFvgxx/qoRUA7cnSlY5RLNzM44y+Ik/ZcVr4ReqYBC2g5mGi5htoiNSLWR nwWR+5hNLAp44OZgkZfNsf6kB9brWDQh3PbnBjy6sKXSBoSVIfxTweh2DMJXbZ7l 1Ck+S7WyLMhGJp448TcuBykr/l9i3uqNh061XavjwP8CAjAdZ787XlnNSztc2pyh dvbI/E76pLGb5ZoFdqlY2Syl63ZFN4K8mjZMSPYfYKf85EDIxe4MYwpbo7/pwzh3 8OlBwH6r4aUMw+QgE1nx8nsjaCoGDMFdgJeJJaWdriZ6Nst2n5gREk/mzbrAWkNG ujChn/6hES9LuE21aCp1ipB7qnnyeRinfqz2acEFxMQxuPdjwKrdJqNsBaTWsapE Z+b/BFP+LTdPfHCmMSVwfMrNbwsoY7+L4EXXL36lUgOwcDp0vCXA+PiiahYASewA 1LDQ3CURCEapdBhVU+06Kb4y5eWU7M7EqpOwpHgRJ92dVxgNxuCfcurvxzqPP1UP 3O4R7bfUTTg= =OmAu -----END PGP SIGNATURE----- Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) ARM: dts: lpc32xx: add device node for IRAM on-chip memory ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes ...	2016-10-07 21:34:49 -07:00
Linus Torvalds	a439f8f287	ARM: 64-bit DT updates for v4.8 ... The 64-bit DT changes are surprisingly small this time, we only add two SoC platforms: the ZTE ZX296718 Set-top-box SoC and the SocioNext UniPhier LD11 TV SoC, each with their reference boards. There are three new machines added for existing SoC platforms: - The Marvell Armada 8040 development board is an impressive quad-core Cortex-A72 machine with three 10gbit ethernet interfaces - Qualcomms DragonBoard 820c single-board computer is their current high-end phone platform in the 96boards form factor - Rockchip: Tronsmart Orion r86 set-top-box is a popular mid-range Android box based on the 8-core rk3368 SoC. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAV/gsAGCrR//JCVInAQJQBA//bfPEm12nrxtWNvwHLs1yQ3yeLe0S7gGp OO5GF3dBKct2CEo33XmVfTplEEDkuA+j6k+ZDbgjIyv8APaLfoVj1AtLgCTNoBFh lpEyCpgjNCFMPLWoBy2GmuhIFA/K0O5BXEXsc5ygda40WGOJ9TjeyS7Wd5iav2qo oA2hjY4h7ZaSaOHFNSJ0HkXJQnXOh1iaVAJuxYbWC4Fm7QEQocXiW0uAZiS9cijU cQP2AUJZMLVyOGU7bTy3GWUA7MEPaZMVTYBbhKLCFXp+uZE2YV43C0U7S74dRQAq wtDyTIKrLuV6NQO1hJD/uIQUnuRLEqseI33rXU7SmqNiNTthpk5RVudIknGhpYkX ALnLbSoZYRo2cJTAz4gARMagucGLBhMYxwz3DPx/ax/CL1J9004vSKdLoiZ6iglA 5LB9GB79YdqpM+7bMFctcdNST6g64yxQNvHJzvu4PinMyuGDIkkPJ+wSdHc2Z7Ar Rs4q94745et6SGMByBtPJgAjZYpS3bjgDB/f9zvpYeVmgbD5QLBq74AZNf2vipz5 LWsOjnZ1sSB7elsj7ZZWxl0/czsLl8YqTCgt814m7a4OLbKMBAqznw7uIOjrh7l4 PgHYxHPYuXmLvKtxbc0jkEipMU+vL3p/wd+bU389SOs92gXbM/XK3IG2QpgzX0po nUxd2Aac7Ko= =PxJN -----END PGP SIGNATURE----- Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "The 64-bit DT changes are surprisingly small this time, we only add two SoC platforms: the ZTE ZX296718 Set-top-box SoC and the SocioNext UniPhier LD11 TV SoC, each with their reference boards. There are three new machines added for existing SoC platforms: - The Marvell Armada 8040 development board is an impressive quad-core Cortex-A72 machine with three 10gbit ethernet interfaces - Qualcomms DragonBoard 820c single-board computer is their current high-end phone platform in the 96boards form factor - Rockchip: Tronsmart Orion r86 set-top-box is a popular mid-range Android box based on the 8-core rk3368 SoC" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (91 commits) arm64: dts: berlin4ct: Add L2 cache topology arm64: dts: berlin4ct: enable all wdt nodes unconditionally arm64: dts: berlin4ct: switch to Cortex-A53 specific pmu nodes arm64: dts: Add ZTE ZX296718 SoC dts and Makefile arm64: dts: apm: Add DT node for APM X-Gene 2 CPU clocks arm64: dts: apm: Add X-Gene SoC hwmon to device tree arm64: dts: apm: Fix interrupt polarity for X-Gene PCIe legacy interrupts arm64: dts: apm: Add APM X-Gene v2 SoC PMU DTS entries arm64: dts: apm: Add APM X-Gene SoC PMU DTS entries arm64: dts: marvell: enable MSI for PCIe on Armada 7K/8K arm64: dts: ls2080a: Add 'dma-coherent' for ls2080a PCI nodes arm64: dts: rockchip: add Type-C phy for RK3399 arm64: dts: rockchip: enable the gmac for rk3399 evb board arm64: dts: rockchip: add the gmac needed node for rk3399 arm64: dts: rockchip: support the pmu node for rk3399 arm64: dts: rockchip: change all interrupts cells to 4 on rk3399 SoCs arm64: dts: rockchip: add the tcpc for rk3399 power domain arm64: dts: rockchip: add efuse0 device node for rk3399 arm64: dts: rockchip: configure PCIe support for rk3399-evb arm64: dts: rockchip: add the PCIe controller support for RK3399 ...	2016-10-07 21:32:39 -07:00
Linus Torvalds	00e729c933	ARM: DT updates for v4.9 ... These are as usual a very large number of mostly boring updates to enable devices in existing machines, or to fix minor bugs. Notably, an ongoing treewide effort to fix warnings caused by an update to the device tree compiler. These are enabled with "make W=1" at the moment but can hopefully become the default once all issues have been addressed. No new SoC platform is added this time around (Armada 395 and Orion mv88f5181 are slight variations of existing ones), but a significant number of new dts files are added, which I list by platform: - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets; Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo single-board computers - ARM Realview: all supported machines (ported from board files) - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and BCM958622hr reference boards for Northstar platform; Raspberry Pi Zero single-board computer - Marvell EBU: Netgear WNR854T router (ported from board file); Armada 395 SoC platform and GP board Armada 390 DB development board - NXP i.MX: imx7s Warp7 reference board; Gateworks Ventana GW553x single-board computer, Technologic Systems TS-4900 and Engicam IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board - Qualcomm: LG Nexus 5 Phone - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards - Rockchip: Rockchip RK3288 Fennec reference board; Firefly RK3288 Reload platform - ST Microelectronics STi: B2260 (96boards) single-board computer - TI Davinci: OMAP-L138 LCDK Development kit - TI OMAP: beagleboard-x15 rev B1 single-board computer Conflicts: vendor-prefixes.txt has conflicting additions, keep all of them in alphabetical order. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAV/g11mCrR//JCVInAQIWbw/9FOrBghI2bFqZkDwFE8E3QCpc9bIiETMx FMdHV6FAo0D6Yp4EqlWjFI0u0Kn9l4FKz0SYWAigpfT6gfeI1THC2Kl31mslvb5U v3QreXI4rKjZS/B1lYECee0os+fNvJcWKj3uFjb4VT1k7T6+MytjHGAQSzwxM66Q 0Lp5HjdFGDrOXoIUx2eEZkZlVXyQ2EFocMoAsj+s/MHnA8fn1tWW08633kjTsC6y 9Xj71joghlDKZjA56htaEQ+/6dYdxAHVlvkN7aL9di+2Sc2/ma6my70Zvs4zwtOv uJDhcJhjwvf3QtDuOoGhTnFtQYQWaONaGUFyEwYyy2kIwiJy0afep4JCq2o+/CZM VMvGXepJpVujE9mg+LwHPgaMYgBhswsJzwQ2ZESrMQcUZ624E18dG2/ei5zat4UN 5/NvzxEoDGmfQFQUpuoZuPqhwLRauXr7I+u4aliIdtSBGeaA2T1yFT4pVgNUOxBQ 0bMtE2QSUKyaF+xAHLTsV7yheDU0S+C7zVkLPwePK0V7vUFuBsdQiXEqXh/6MSq0 iYVPmKwNTIHK3qMiGtm8XDugjR8Pf0tCXRqIWJMlXs75rCAsKfFW4j4XYnlO4wMy dP2fdoe0xA+zthR0hRHD5i8WCmISeUgtPAdFyTid1jZkMk1AzM0AqBUdAqTInvQ3 O4JSYcjBWoo= =/gg/ -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are as usual a very large number of mostly boring updates to enable devices in existing machines, or to fix minor bugs. Notably, an ongoing treewide effort to fix warnings caused by an update to the device tree compiler. These are enabled with "make W=1" at the moment but can hopefully become the default once all issues have been addressed. No new SoC platform is added this time around (Armada 395 and Orion mv88f5181 are slight variations of existing ones), but a significant number of new dts files are added, which I list by platform: - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets, Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo single-board computers - ARM Realview: all supported machines (ported from board files) - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and BCM958622hr reference boards for Northstar platform, Raspberry Pi Zero single-board computer - Marvell EBU: Netgear WNR854T router (ported from board file), Armada 395 SoC platform and GP board Armada 390 DB development board - NXP i.MX: imx7s Warp7 reference board, Gateworks Ventana GW553x single-board computer, Technologic Systems TS-4900 and Engicam IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board - Qualcomm: LG Nexus 5 Phone - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards - Rockchip: Rockchip RK3288 Fennec reference board, Firefly RK3288 Reload platform - ST Microelectronics STi: B2260 (96boards) single-board computer - TI Davinci: OMAP-L138 LCDK Development kit - TI OMAP: beagleboard-x15 rev B1 single-board computer" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (390 commits) ARM: dts: sony-nsz-gs7: add missing unit name to /memory node ARM: dts: chromecast: add missing unit name to /memory node ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node ARM: dts: berlin2: Add missing unit name to /soc node ARM: dts: berlin2cd: Add missing unit name to /soc node ARM: dts: berlin2q: Add missing unit name to /soc node ARM: dts: berlin2: Remove skeleton.dtsi inclusion ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion ARM: dts: berlin2q: Remove skeleton.dtsi inclusion arm: dts: berlin2q: enable all wdt nodes unconditionally arm: dts: berlin2: enable all wdt nodes unconditionally ARM: dts: omap5-igep0050.dts: Use tabs for indentation ARM: dts: Fix igepv5 power button GPIO direction ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node ARM: dts: s3c64xx: Use macros for pinctrl configuration ARM: dts: s3c2416: Use macros for pinctrl configuration ARM: dts: s5pv210: Use macros for pinctrl configuration ARM: dts: s3c64xx: Use common macros for pinctrl configuration ...	2016-10-07 21:29:04 -07:00
Linus Torvalds	6afd563d4b	ARM: SoC driver updates for v4.9 ... Driver updates for ARM SoCs, including a couple of newly added drivers: - The Qualcomm external bus interface 2 (EBI2), used in some of their mobile phone chips for connecting flash memory, LCD displays or other peripherals - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the EFUSE based on that firmware interface. - Perf support for the AppliedMicro X-Gene performance monitor unit - Reset driver for STMicroelectronics STM32 - Reset driver for SocioNext UniPhier SoCs Aside from these, there are minor updates to SoC-specific bus, clocksource, firmware, pinctrl, reset, rtc and pmic drivers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAV/gaimCrR//JCVInAQJaOQ/6A++YfLVmdF4wxgcu/0ti28lA7SkQIGJV UAsfCmqMEutbeDvnloVGmTV2K2NS7mzxdxsJGbVB7Oe/zdOFN+T9sf9hAlId01QA oVkoagpofoxlyKoKJ/l+heuEEZMa0Ekk3XXRTGv/Ovymo7252o4tEdGu9c+gyaMJ KqgixcrQRzxuWDgPpHUPUez2vY1iRMvvdcb0EmfiHcIgPOEJc6MIxulsqEIrkoMz WYeGFIeqRJxnrur3QD8WnD+aZD6bV01wkFTkWXGWg4H87QfEESgVBu5A7TL+5sL8 1SlX/b7S5/ZJbrOiOS2IUyvbK7NiA/Q+NunHW2rMVnUWuEvJ9HAQB1kVSQH5LIYO 6OBokjcijm6m/j6O6fdDfvNd6PLsIEUqfWVws7O+uofMMqKPxqak4VBTRdFM+aeF ZtK7mEbzteCX0bnC+XblZrseAlkIehYnP80CLDbtDTerTWP4gsjxGVt3U6MO0NzB K0ACWZOclzrcFscNKrmP6uPCpfZriiPV/XMCEHcylA/X2iYsVmpqKzdLuNs5aeUr uPzQbNWu9ygg/bDRXMYY2E3Kzjsc0eIOKEOPyhLaZdSo4e1FQxud6L2V2Vj0RLB/ iMA7/CyQZqn6Yzgs0VMZm/bnh+hIdHioGFl5K5j6Fcw9VZRkNmnEQJzX4VU5efGO g1+5av0vFXg= =GvTq -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - The Qualcomm external bus interface 2 (EBI2), used in some of their mobile phone chips for connecting flash memory, LCD displays or other peripherals - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the EFUSE based on that firmware interface. - Perf support for the AppliedMicro X-Gene performance monitor unit - Reset driver for STMicroelectronics STM32 - Reset driver for SocioNext UniPhier SoCs Aside from these, there are minor updates to SoC-specific bus, clocksource, firmware, pinctrl, reset, rtc and pmic drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) bus: qcom-ebi2: depend on HAS_IOMEM pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181 clk: mvebu: Add clk support for the orion5x SoC mv88f5181 dt-bindings: EXYNOS: Add Exynos5433 PMU compatible clocksource: exynos_mct: Add the support for ARM64 perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Documentation: Add documentation for APM X-Gene SoC PMU DTS binding MAINTAINERS: Add entry for APM X-Gene SoC PMU driver bus: qcom: add EBI2 driver bus: qcom: add EBI2 device tree bindings rtc: rtc-pm8xxx: Add support for pm8018 rtc nvmem: amlogic: Add Amlogic Meson EFUSE driver firmware: Amlogic: Add secure monitor driver soc: qcom: smd: Reset rx tail rather than tx memory: atmel-sdramc: fix a possible NULL dereference reset: hi6220: allow to compile test driver on other architectures reset: zynq: add driver Kconfig option reset: sunxi: add driver Kconfig option reset: stm32: add driver Kconfig option reset: socfpga: add driver Kconfig option ...	2016-10-07 21:23:40 -07:00
Linus Torvalds	66f2c6d952	ARM: SoC platform updates for v4.9 ... These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - We get support for running in big-endian mode on two platforms: sunxi (Allwinner) and s3c24xx (old Samsung). - The recently added Uniphier platform now uses standard PSCI methods for SMP booting and we remove support for old bootloader versions that did not support it yet. - In sunxi, we gain support for the "Nextthing GR8" SoC, which is a close relative of the Allwinner A13 and R8 chips. - PXA completes its move over to the generic dmaengine framework and removes its old private API - mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC with integrated 802.11ac wireless networking. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAV/gUVGCrR//JCVInAQKoyA/8DeV4M2IL/csGvnDwroH8rjDCvdeVDG0b QhwtoIoy5Ur85fjZKsIJnu+8lZyB9Kun5p9mrjGsl1fo2PMjNKkOIN2BvV2r35Bo kcpogVbOzFBJ3decX2QlQ41hhZaFphGWt21oBtslDabRBMyDxsRrv10Qy1gazw6F aDwvSYUarUajtYq4tDli1mFbj6Tu5YZgL/mRWjEwM7fy4AE9MBd/R7/dAYGF6n7v LF4l46k4ZIWl1txFcTJ84fV1ugf0O1f0j3umpaRo3QFWonFXmEkFqkyVPZmfoqPf Q0MvLOZEOImA3UH1njpPV4PsZiDuA/aPuKYrV3aCfAcpKTvkWL5AJrc8YCBv3x/m rOeLC3EKKj7u0IBoIW4YjzFngMkLthrYQ4Mz2URa0CJNwnW3GK1HswmU8wvpF73p AMXxfpIjcf7tkauxMX3HOIltWa6DAa5C19lqKhiRzdwm884ZSJ3BRIswh1SHA4bz f9h80FhI9GisfUL8k+axTtI5nsaLc6fzT4rCbQlp/WyeWFODEycx9T0mhvzd9Adc 7vEvAssh21x4AyZmfcKwb/7xsX15zN+dkB9AuX21ssmOvZ2Tb1zYYHItp0xtEi3R 5hL/8TRAHyUgyDq6MBQyg3EOSW6A+IqrVPRi10ND5q8+dK9Xh1bx08Wp3fZRQMHw cBAWWa7pQLM= =y4XF -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - We get support for running in big-endian mode on two platforms: sunxi (Allwinner) and s3c24xx (old Samsung). - The recently added Uniphier platform now uses standard PSCI methods for SMP booting and we remove support for old bootloader versions that did not support it yet. - In sunxi, we gain support for the "Nextthing GR8" SoC, which is a close relative of the Allwinner A13 and R8 chips. - PXA completes its move over to the generic dmaengine framework and removes its old private API - mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC with integrated 802.11ac wireless networking" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: imx legacy: pca100: move peripheral initialization to .init_late ARM: imx legacy: mx27ads: move peripheral initialization to .init_late ARM: imx legacy: mx21ads: move peripheral initialization to .init_late ARM: imx legacy: pcm043: move peripheral initialization to .init_late ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late ARM: imx legacy: vpr200: move peripheral initialization to .init_late ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late ARM: imx legacy: qong: move peripheral initialization to .init_late ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late ARM: imx legacy: pcm037: move peripheral initialization to .init_late ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late ARM: imx legacy: mx31ads: move peripheral initialization to .init_late ARM: imx legacy: mx31lite: move peripheral initialization to .init_late ARM: imx legacy: kzm: move peripheral initialization to .init_late MAINTAINERS: update list of Oxnas maintainers ARM: orion5x: remove extraneous NO_IRQ ARM: orion: simplify orion_ge00_switch_init ...	2016-10-07 21:18:42 -07:00
Sangwon Jee	e687abfe9d	Input: melfas_mip4 - add devicetree binding documentations ... Add devicetree binding documentations. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>	2016-10-07 16:30:13 -07:00
Linus Torvalds	87840a2b7e	Merge branch 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux ... Pull i2c updates from Wolfram Sang: "Here is the 4.9 pull request from I2C including: - centralized error messages when registering to the core - improved lockdep annotations to prevent false positives - DT support for muxes, gates, and arbitrators - bus speeds can now be obtained from ACPI - i2c-octeon got refactored and now supports ThunderX SoCs, too - i2c-tegra and i2c-designware got a bigger bunch of updates - a couple of standard driver fixes and improvements" * 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits) i2c: axxia: disable clks in case of failure in probe i2c: octeon: thunderx: Limit register access retries i2c: uniphier-f: fix misdetection of incomplete STOP condition gpio: pca953x: variable 'id' was used twice i2c: i801: Add support for Kaby Lake PCH-H gpio: pca953x: fix an incorrect lockdep warning i2c: add a warning to i2c_adapter_depth() lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible i2c: export i2c_adapter_depth() i2c: rk3x: Fix variable 'min_total_ns' unused warning i2c: rk3x: Fix sparse warning i2c / ACPI: Do not touch an I2C device if it belongs to another adapter i2c: octeon: Fix high-level controller status check i2c: octeon: Avoid sending STOP during recovery i2c: octeon: Fix set SCL recovery function i2c: rcar: add support for r8a7796 (R-Car M3-W) i2c: imx: make bus recovery through pinctrl optional i2c: meson: add gxbb compatible string i2c: uniphier-f: set the adapter to master mode when probing i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path ...	2016-10-07 14:12:21 -07:00
Linus Torvalds	e6e3d8f8f4	PCI changes for the v4.9 merge window: ... Enumeration microblaze: Add multidomain support for procfs (Bharat Kumar Gogada) Resource management Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie) Ignore requested alignment for VF BARs (Yongji Xie) PCI device hotplug Make core explicitly non-modular (Paul Gortmaker) PCIe native device hotplug Rename pcie_isr() locals for clarity (Bjorn Helgaas) Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas) Remove unnecessary guard (Bjorn Helgaas) Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas) Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas) Clear attention LED on device add (Keith Busch) Allow exclusive userspace control of indicators (Keith Busch) Process all hotplug events before looking for new ones (Mayurkumar Patel) Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel) Don't re-read Slot Status when handling surprise event (Mayurkumar Patel) Make explicitly non-modular (Paul Gortmaker) Power management Afford direct-complete to devices with non-standard PM (Lukas Wunner) Query platform firmware for device power state (Lukas Wunner) Recognize D3cold in pci_update_current_state() (Lukas Wunner) Avoid unnecessary resume after direct-complete (Lukas Wunner) Make explicitly non-modular (Paul Gortmaker) Virtualization Mark Atheros AR9580 to avoid bus reset (Maik Broemme) Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu) MSI Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto) AER Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas) Remove aerdriver.forceload kernel parameter (Bjorn Helgaas) Fix aer_probe() kernel-doc comment (Cao jin) Add bus flag to skip source ID matching (Jon Derrick) Avoid memory allocation in interrupt handling path (Jon Derrick) Cache capability position (Keith Busch) Make explicitly non-modular (Paul Gortmaker) Remove duplicate AER severity translation (Tyler Baicar) Send correct severity to calculate AER severity (Tyler Baicar) Precision Time Measurement Add Precision Time Measurement (PTM) support (Jonathan Yong) Add PTM clock granularity information (Bjorn Helgaas) Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas) Generic host bridge driver Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Make explicitly non-modular (Paul Gortmaker) Altera host bridge driver Remove redundant platform_get_resource() return value check (Bjorn Helgaas) Poll for link training status after retraining the link (Ley Foon Tan) Rework config accessors for use without a struct pci_bus (Ley Foon Tan) Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan) Make MSI explicitly non-modular (Paul Gortmaker) Make explicitly non-modular (Paul Gortmaker) Relax device number checking to allow SR-IOV (Po Liu) ARM Versatile host bridge driver Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Axis ARTPEC-6 host bridge driver Drop __init from artpec6_add_pcie_port() (Niklas Cassel) Freescale i.MX6 host bridge driver Make explicitly non-modular (Paul Gortmaker) Intel VMD host bridge driver Add quirk for AER to ignore source ID (Jon Derrick) Allocate IRQ lists with correct MSI-X count (Jon Derrick) Convert to use pci_alloc_irq_vectors() API (Jon Derrick) Eliminate vmd_vector member from list type (Jon Derrick) Eliminate index member from IRQ list (Jon Derrick) Synchronize with RCU freeing MSI IRQ descs (Keith Busch) Request userspace control of PCIe hotplug indicators (Keith Busch) Move VMD driver to drivers/pci/host (Keith Busch) Marvell Aardvark host bridge driver Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun) Microsoft Hyper-V host bridge driver Use zero-length array in struct pci_packet (Dexuan Cui) Use pci_function_description[0] in struct definitions (Dexuan Cui) Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui) Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui) Handle hv_pci_generic_compl() error case (Dexuan Cui) Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun) NVIDIA Tegra host bridge driver Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Remove redundant _data suffix (Thierry Reding) Use of_device_get_match_data() (Thierry Reding) Qualcomm host bridge driver Make explicitly non-modular (Paul Gortmaker) Renesas R-Car host bridge driver Consolidate register space lookup and ioremap (Bjorn Helgaas) Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven) Add multi-MSI support (Grigory Kletsko) Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Fix some checkpatch warnings (Sergei Shtylyov) Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov) Rockchip host bridge driver Add DT bindings for Rockchip PCIe controller (Shawn Lin) Add Rockchip PCIe controller support (Shawn Lin) Improve the deassert sequence of four reset pins (Shawn Lin) Fix wrong transmitted FTS count (Shawn Lin) Increase the Max Credit update interval (Rajat Jain) Samsung Exynos host bridge driver Make explicitly non-modular (Paul Gortmaker) ST Microelectronics SPEAr13xx host bridge driver Make explicitly non-modular (Paul Gortmaker) Synopsys DesignWare host bridge driver Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas) Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo) Check LTSSM training bit before deciding link is up (Jisheng Zhang) Move link wait definitions to .c file (Joao Pinto) Wait for iATU enable (Joao Pinto) Add iATU Unroll feature (Joao Pinto) Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Make explicitly non-modular (Paul Gortmaker) Relax device number checking to allow SR-IOV (Po Liu) Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand) Remove redundant platform_get_resource() return value check (Wei Yongjun) TI DRA7xx host bridge driver Make explicitly non-modular (Paul Gortmaker) TI Keystone host bridge driver Propagate request_irq() failure (Wei Yongjun) Xilinx AXI host bridge driver Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada) Clear interrupt register for invalid interrupt (Bharat Kumar Gogada) Clear correct MSI set bit (Bharat Kumar Gogada) Dispose of MSI virtual IRQ (Bharat Kumar Gogada) Make explicitly non-modular (Paul Gortmaker) Relax device number checking to allow SR-IOV (Po Liu) Xilinx NWL host bridge driver Expand error logging (Bharat Kumar Gogada) Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada) Make explicitly non-modular (Paul Gortmaker) Miscellaneous Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner) portdrv: Make explicitly non-modular (Paul Gortmaker) Make DPC explicitly non-modular (Paul Gortmaker) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJX9pOwAAoJEFmIoMA60/r8NfMQAMEMYK3yv/RQtcQvtB26L2eJ Zn6eJXZPFDsaP+uRYrZEEphHccGFJgmtnOEYjo5XH+wUovmj8BxIy58APEGij/69 iJyaXkI2jRVCOFna6WLJKS0jM6/Lw40RdwrANqHfvzR9N8pEjDD36BglshFNK/pK 07dYNtI+/sq1j5K1UE6bK4uiAURiPc2SfK4/+M4Mg4SfZMQgLIvpT8VHdercYSXN eGA0SHGNm8qIK2JArwa293z6zB0Kw05juLayZHai6PwDqqNMvzgzS4pChGJl4klH fFe3bhlBVR2SGh9nuHMgIMWKGKGkjWBjwS1p0ENDgdpBVPXmDIc7Ka8Q0BqAFz+F YOmj4BtR8U3mOj942bxYZYqqqt02Brlu+/YkY6+OtNjKWi7w0s24dd5vEfBl2nVV T2klW4P9MuCnsutfrxkFL8voJRCIdV3fohwLHfHVfNTZN+bSZnlo9MiywbgQlexV 5BKIA5z9E87bhvo7Mr8VCZjjEV0E3RrT4sgaJyQhGUGIpuZDiZFHSujBo53jRSdy jvIb22cQtmQJAkafID6djcMbXh+LIhXqUfH1ZVqpJFFMJN43zB7dwaMwrLsZgqTi ZV7VxZJVN7U6JCQvtNvwLBeKT82T7jxVZoSIogc/UR0gelb6jPN/yiTX5TUzMgPs HW7F3hv0AdmYKPcGZJAP =0Aq4 -----END PGP SIGNATURE----- Merge tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Summary of PCI changes for the v4.9 merge window: Enumeration: - microblaze: Add multidomain support for procfs (Bharat Kumar Gogada) Resource management: - Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie) - Ignore requested alignment for VF BARs (Yongji Xie) PCI device hotplug: - Make core explicitly non-modular (Paul Gortmaker) PCIe native device hotplug: - Rename pcie_isr() locals for clarity (Bjorn Helgaas) - Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas) - Remove unnecessary guard (Bjorn Helgaas) - Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas) - Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas) - Clear attention LED on device add (Keith Busch) - Allow exclusive userspace control of indicators (Keith Busch) - Process all hotplug events before looking for new ones (Mayurkumar Patel) - Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel) - Don't re-read Slot Status when handling surprise event (Mayurkumar Patel) - Make explicitly non-modular (Paul Gortmaker) Power management: - Afford direct-complete to devices with non-standard PM (Lukas Wunner) - Query platform firmware for device power state (Lukas Wunner) - Recognize D3cold in pci_update_current_state() (Lukas Wunner) - Avoid unnecessary resume after direct-complete (Lukas Wunner) - Make explicitly non-modular (Paul Gortmaker) Virtualization: - Mark Atheros AR9580 to avoid bus reset (Maik Broemme) - Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu) MSI: - Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto) AER: - Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas) - Remove aerdriver.forceload kernel parameter (Bjorn Helgaas) - Fix aer_probe() kernel-doc comment (Cao jin) - Add bus flag to skip source ID matching (Jon Derrick) - Avoid memory allocation in interrupt handling path (Jon Derrick) - Cache capability position (Keith Busch) - Make explicitly non-modular (Paul Gortmaker) - Remove duplicate AER severity translation (Tyler Baicar) - Send correct severity to calculate AER severity (Tyler Baicar) Precision Time Measurement: - Add Precision Time Measurement (PTM) support (Jonathan Yong) - Add PTM clock granularity information (Bjorn Helgaas) - Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas) Generic host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Make explicitly non-modular (Paul Gortmaker) Altera host bridge driver: - Remove redundant platform_get_resource() return value check (Bjorn Helgaas) - Poll for link training status after retraining the link (Ley Foon Tan) - Rework config accessors for use without a struct pci_bus (Ley Foon Tan) - Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan) - Make MSI explicitly non-modular (Paul Gortmaker) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) ARM Versatile host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Axis ARTPEC-6 host bridge driver: - Drop __init from artpec6_add_pcie_port() (Niklas Cassel) Freescale i.MX6 host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Intel VMD host bridge driver: - Add quirk for AER to ignore source ID (Jon Derrick) - Allocate IRQ lists with correct MSI-X count (Jon Derrick) - Convert to use pci_alloc_irq_vectors() API (Jon Derrick) - Eliminate vmd_vector member from list type (Jon Derrick) - Eliminate index member from IRQ list (Jon Derrick) - Synchronize with RCU freeing MSI IRQ descs (Keith Busch) - Request userspace control of PCIe hotplug indicators (Keith Busch) - Move VMD driver to drivers/pci/host (Keith Busch) Marvell Aardvark host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun) Microsoft Hyper-V host bridge driver: - Use zero-length array in struct pci_packet (Dexuan Cui) - Use pci_function_description[0] in struct definitions (Dexuan Cui) - Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui) - Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui) - Handle hv_pci_generic_compl() error case (Dexuan Cui) - Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun) NVIDIA Tegra host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Remove redundant _data suffix (Thierry Reding) - Use of_device_get_match_data() (Thierry Reding) Qualcomm host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Renesas R-Car host bridge driver: - Consolidate register space lookup and ioremap (Bjorn Helgaas) - Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven) - Add multi-MSI support (Grigory Kletsko) - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Fix some checkpatch warnings (Sergei Shtylyov) - Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov) Rockchip host bridge driver: - Add DT bindings for Rockchip PCIe controller (Shawn Lin) - Add Rockchip PCIe controller support (Shawn Lin) - Improve the deassert sequence of four reset pins (Shawn Lin) - Fix wrong transmitted FTS count (Shawn Lin) - Increase the Max Credit update interval (Rajat Jain) Samsung Exynos host bridge driver: - Make explicitly non-modular (Paul Gortmaker) ST Microelectronics SPEAr13xx host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Synopsys DesignWare host bridge driver: - Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas) - Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo) - Check LTSSM training bit before deciding link is up (Jisheng Zhang) - Move link wait definitions to .c file (Joao Pinto) - Wait for iATU enable (Joao Pinto) - Add iATU Unroll feature (Joao Pinto) - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) - Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand) - Remove redundant platform_get_resource() return value check (Wei Yongjun) TI DRA7xx host bridge driver: - Make explicitly non-modular (Paul Gortmaker) TI Keystone host bridge driver: - Propagate request_irq() failure (Wei Yongjun) Xilinx AXI host bridge driver: - Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada) - Clear interrupt register for invalid interrupt (Bharat Kumar Gogada) - Clear correct MSI set bit (Bharat Kumar Gogada) - Dispose of MSI virtual IRQ (Bharat Kumar Gogada) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) Xilinx NWL host bridge driver: - Expand error logging (Bharat Kumar Gogada) - Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada) - Make explicitly non-modular (Paul Gortmaker) Miscellaneous: - Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner) - portdrv: Make explicitly non-modular (Paul Gortmaker) - Make DPC explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits) x86/PCI: VMD: Move VMD driver to drivers/pci/host PCI: rockchip: Fix wrong transmitted FTS count PCI: rockchip: Improve the deassert sequence of four reset pins PCI: rockchip: Increase the Max Credit update interval PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot PCI/AER: Fix aer_probe() kernel-doc comment PCI: Ignore requested alignment for VF BARs PCI: Ignore requested alignment for PROBE_ONLY and fixed resources PCI: Avoid unnecessary resume after direct-complete PCI: Recognize D3cold in pci_update_current_state() PCI: Query platform firmware for device power state PCI: Afford direct-complete to devices with non-standard PM PCI/AER: Cache capability position PCI/AER: Avoid memory allocation in interrupt handling path x86/PCI: VMD: Request userspace control of PCIe hotplug indicators PCI: pciehp: Allow exclusive userspace control of indicators ACPI / APEI: Send correct severity to calculate AER severity PCI/AER: Remove duplicate AER severity translation x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs x86/PCI: VMD: Eliminate index member from IRQ list ...	2016-10-07 11:46:37 -07:00
Linus Torvalds	d4e65476bc	Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input ... Pull input subsystem updates from Dmitry Torokhov: "You will get - a new driver for Elan eKTF2127 touchscreen controllers - a new "gpio-decoder" driver to read and report state of several GPIO lines - an ADC resistor ladder driver - the ft6326 driver is removed because edt-ft5x06 handles the same devices just fine. .. plus the regular slew of driver fixes/enhancements" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: elan_i2c - fix return tests of i2c_smbus_read_block_data() Input: ektf2127 - mark PM functions as __maybe_unused Input: snvs_pwrkey - drop input_free_device call if input_register_device fails Input: add support for Elan eKTF2127 touchscreen controller Input: serio - add hangup support Input: tps65218-pwrbutton - add support for tps65217 variant Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includes Input: jornada720_kbd - remove unneeded mach/hardware.h include Input: focaltech - mark focaltech_set_resolution() static Input: wdt87xx_i2c - fix the flash erase issue Input: gpio-keys-polled - don't use unit-address with button nodes Input: add generic input driver to read encoded GPIO lines Input: add ADC resistor ladder driver Input: pegasus_notetaker - directly include workqueue header Input: elants_i2c - get product id on recovery mode for FW update Input: wm97xx - remove deprecated create_singletheread_workqueue Input: mc13783_ts - remove deprecated create_singletheread_workqueue Input: psmouse - remove deprecated create_singletheread_workqueue Input: jornada720_kbd - switch to using dev_dbg Input: jornada720_kbd - get rid of mach/irqs.h include ...	2016-10-07 09:12:19 -07:00
Linus Torvalds	d042380886	- Core Frameworks ... - Add the MFD bindings doc to MAINTAINERS - New Drivers - X-Powers AC100 Audio CODEC and RTC - TI LP873x PMIC - Rockchip RK808 PMIC - Samsung Exynos Low Power Audio - New Device Support - Add support for STMPE1600 variant to stmpe - Add support for PM8018 PMIC to pm8921-core - Add support for AXP806 PMIC in axp20x - Add support for AXP209 GPIO in axp20x - New Functionality - Add support for Reset to all STMPE variants - Add support for MKBP event support to cros_ec - Add support for USB to intel_soc_pmic_bxtwc - Add support for IRQs and Power Button to tps65217 - Fix-ups - Clean-up defunct author emails; da9063, max14577 - Kconfig fixups; wm8350-i2c, as3722 - Constify; altera-a10sr, sm501 - Supply PCI IDs; intel-lpss-pci - Improve clocking; qcom_rpm - Fix IRQ probing; ucb1x00-core - Ensure fault log is cleared; da9052 - Remove NO_IRQ check; ucb1x00-core - Supply I2C properties; intel-lpss-acpi, intel-lpss-pci - Non standard declaration; tps65217, max8997-irq - Remove unused code; lp873x, db8500-prcmu, ab8500-debugfs, cros_ec_spi - Make non-modular; altera-a10sr, intel_msic, smsc-ece1099, sun6i-prcm, twl-core, - OF bindings; ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x, lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona - Bug Fixes - Release OF pointer; qcom_rpm - Avoid double shifting in suspend/resume; 88pm80x - Fix 'defined but not used' error; exynos-lpass - Fix 'sleeping whilst attomic'; atmel-hlcdc -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJX9giOAAoJEFGvii+H/Hdh8aEP/iiHosBZsksZ4we8KAdoXkxi x5nnJvS9+4b5yaasSiN8e2xs9YMOlHu1CNZDZ3RJZ+rLusdVeg5ju5p5WED83pvi ltiPMhyqruM3d0rieTRHxeJFmmEf2exwKV3Y+5lo9586dFfJrmGp2AxScId4TtwP CcsjwYRx/WvVfWrv1xWsjd9b1RDlWglt3dcVhdKAQbvPPOy5O4ymXNMFs0DuFyZ+ 2A16sw7hdYenXSvAHlZzS5IqXP9JEeosu3O/mUUZKF3PO55t+KbQBGZiwXoal4gp 1dwrdBjlrZaHcDa5Ra9x+jQ2kxIkyUT44CXKAHa7llTfZQkZIgnv/fWUhB8C5JxU iaqnN9rWQ2MNjt3Us/n1TSJH2kEnSNbzrQixE0n8yjIBsZePWlW2ZpWYRF7GPG2i 2pB8oNz/NdDkKWdosR3ArnseNOKVcC+GtD+mHk0aKMPghPq+gDIRrdM0CFyWeIZE w/Cf+HHZPR0O1VuYZ9bHIhbgnEbz5xUADOtBAdppIBQiNEI/G9lJpG6Ft4FTQoPi CIbnnB/wxxMaEl85rUPYGkxQniuUI5f0tMv3k2ZtAZMKcqn6iXtiIOuXceM2vUdy ze1uddH4HuHLcrJT5x+J72XJL6RXzZKxOqd0b7BcXnvMVFJrWgleH1JQ2WqazAEW il1u28IkFusm/BW/0dps =Ja7p -----END PGP SIGNATURE----- Merge tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core framework: - Add the MFD bindings doc to MAINTAINERS New drivers: - X-Powers AC100 Audio CODEC and RTC - TI LP873x PMIC - Rockchip RK808 PMIC - Samsung Exynos Low Power Audio New device support: - Add support for STMPE1600 variant to stmpe - Add support for PM8018 PMIC to pm8921-core - Add support for AXP806 PMIC in axp20x - Add support for AXP209 GPIO in axp20x New functionality: - Add support for Reset to all STMPE variants - Add support for MKBP event support to cros_ec - Add support for USB to intel_soc_pmic_bxtwc - Add support for IRQs and Power Button to tps65217 Fix-ups: - Clean-up defunct author emails (da9063, max14577) - Kconfig fixups (wm8350-i2c, as37220 - Constify (altera-a10sr, sm501) - Supply PCI IDs (intel-lpss-pci) - Improve clocking (qcom_rpm) - Fix IRQ probing (ucb1x00-core) - Ensure fault log is cleared (da9052) - Remove NO_IRQ check (ucb1x00-core) - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci) - Non standard declaration (tps65217, max8997-irq) - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs, cros_ec_spi) - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099, sun6i-prcm, twl-core) - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x, lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona) Bugfixes: - Release OF pointer (qcom_rpm) - Avoid double shifting in suspend/resume (88pm80x) - Fix 'defined but not used' error (exynos-lpass) - Fix 'sleeping whilst attomic' (atmel-hlcdc)" * tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: arizona: Handle probe deferral for reset GPIO mfd: arizona: Remove arizona_of_get_named_gpio helper function mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config mfd: twl6040: Register child device for twl6040-pdmclk mfd: cros_ec_spi: Remove unused variable 'request' mfd: omap-usb-host: Return value is not 'const int' mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine() mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem() mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls mfd: ab8500-debugfs: Prevent initialised field from being over-written mfd: max8997-irq: 'inline' should be at the beginning of the declaration mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer mfd: tps65217: Fix nonstandard declaration mfd: lp873x: Remove unused mutex lock from struct lp873x mfd: atmel-hlcdc: Do not sleep in atomic context mfd: exynos-lpass: Mark PM functions as __maybe_unused mfd: intel-lpss: Add default I2C device properties for Apollo Lake mfd: twl-core: Make it explicitly non-modular mfd: sun6i-prcm: Make it explicitly non-modular mfd: smsc-ece1099: Make it explicitly non-modular ...	2016-10-07 08:35:35 -07:00
Linus Torvalds	021723e6c5	power supply and reset changes for the v4.9 series ... * move power supply drivers to drivers/power/supply * unify location of power supply DT documentation * tps65217-charger: IRQ support * act8945a-charger: misc. cleanups & improvements * sbs-battery cleanup * fix users of deprecated create_singlethread_workqueue() * misc fixes. -----BEGIN PGP SIGNATURE----- iQIcBAABCgAGBQJX8j3bAAoJENju1/PIO/qavlcP/Rq5LeMol2KYQfYOLrVKmS9N sqJpOM1wnQS25Dw+KQf+bNOLuBY/w44SnINFYswV2Vw5DQ2ODt1IzvqoaPBwznpq BeLN/NLvYY2vIAPxmHxvdB0mnPEhRJOgZkHXUkonIqX98qnzbIorQtHBhAZ3h2v6 nz5ltO3GXiAyzPE6Zhx9OWWTZRLi1YKCuPZstRU6SY6uGwEMyEVMcu6Rv3XFizBj kng9nOCWRE3723UaGQx3LumI2EIsJ1m7RDHIx0ZPOIRlUEd5bawhxdhfT1pQAEZS y7GSs4FE86QuGN4M+zcxr4u1vSmYsK2c7FGFRnBcwG4Hkmy4O4h1yBjmrMby8eWo V0JxsGkkN+R/6/cAKqXRL0T5gU4rKf4LAj84kSOHGZDiQk0D29wGNZuBtlQw/2sB CLABJvpn11aQ3NIkNttr1ur8S15C9tAEMKmjrK7bbvtzBUp2BoVguYQtkP909s0U 19exP0yslM95t0cRT6lCpZUPFUvoEDs7iIDwv7QBFJSB2ZDMUFfGy6ouM6gHnfKL ZkiCi2gmhTqHCpGvD/yi8FhuDFBZ7Ujcotzn3bE07GSTeG7FmzhR+6khedq9DIYQ xJbDdPwmwhbrOe99O0wk/qFCBcvgmkXaE4O23fBPS10oCs70FFseYFfb15qAljsE 4ydoaCMwFUgH49SpDQC6 =HpLI -----END PGP SIGNATURE----- Merge tag 'for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - move power supply drivers to drivers/power/supply - unify location of power supply DT documentation - tps65217-charger: IRQ support - act8945a-charger: misc. cleanups & improvements - sbs-battery cleanup - fix users of deprecated create_singlethread_workqueue() - misc fixes. * tag 'for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (46 commits) power: supply: bq27xxx_battery: allow kernel poll_interval parameter runtime update power: supply: sbs-battery: Cleanup removal of chip->pdata power: reset: st: Remove obsolete platforms from dt doc power: reset: st-poweroff: Remove obsolete platforms. power: reset: zx-reboot: Unmap region obtained by of_iomap power: reset: xgene-reboot: Unmap region obtained by of_iomap power: supply: ab8500: cleanup with list_first_entry_or_null() power: reset: add in missing white space in error message text sbs-battery: make writes to ManufacturerAccess optional power: bq24257: Fix use of uninitialized pointer bq->charger power: supply: sbs-battery: simplify DT parsing power: supply: bq24735-charger: Request status GPIO with initial input setup power: supply: sbs-battery: Use gpio_desc and sleeping calls for battery detect power: supply: act8945a_charger: Add max current property power: supply: act8945a_charger: Add capacity level property doc: bindings: power: act8945a-charger: Update properties. power: supply: act8945a_charger: Fix the power supply type power: supply: act8945a_charger: Add status change update support power: supply: act8945a_charger: Improve state handling power: supply: act8945a_charger: Remove "battery_temperature" ...	2016-10-06 18:21:15 -07:00
Nelson Chang	3a09f18ef6	net: ethernet: mediatek: remove hwlro property in the device tree ... Since the proper way to check the hw lro capability is by the chip id, hwlro property in the device tree should be removed. Signed-off-by: Nelson Chang <nelson.chang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>	2016-10-06 21:08:08 -04:00
Mike Looijmans	3d9e133fe6	devicetree: net: micrel-ksz90x1.txt: Properly explain skew settings ... The KSZ9031 skew registers contain an offset, the chip's default value is "neutral" which does not add any skew. Programming a 0 into a skew property will actually set it the maximal negative adjustment and not to a neutral position as one would expect. Explain this situation in the devicetree binding documentation and list the settings that the chip considers neutral. Changing the implementation to accept negative values would have been a better solution, but would break existing configurations. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>	2016-10-06 20:49:12 -04:00
Laurent Pinchart	ed2eb0fb87	dt-bindings: net: renesas-ravb: Add support for R8A7796 RAVB ... Add a new compatible string for the R8A7796 (M3-W) RAVB. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>	2016-10-06 20:46:40 -04:00
Linus Torvalds	c6594fc6af	Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration ... Pull mailbox updates from Jussi Brar: "New driver and DT bindings for MHU controller integrated on Amlogic Meson platform" * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: Add Amlogic Meson MHU Bindings mailbox: Add Platform Message-Handling-Unit variant driver	2016-10-06 17:36:53 -07:00
Linus Torvalds	553911c67e	dmaengine updates for 4.8-rc1 ... This is bit large pile of code which bring in some nice additions: - Error reporting: we have added a new mechanism for users of dmaenegine to register a callback_result which tells them the result of the dma transaction. Right now only one user ntb is using it. - As we discussed on KS mailing list and pointed out NO_IRQ has no place in kernel, this also remove NO_IRQ from dmaengine subsystem (both arm and ppc users) - Support for IOMMU slave transfers and it implementation for arm. - To get better build coverage, enable COMPILE_TEST for bunch of driver, and fix the warning and sparse complaints on these. - Apart from above, usual updates spread across drivers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJX9cGYAAoJEHwUBw8lI4NHXh0P/3OsctPYnwcangOz268hHDap 7ZHwau96K7DRi8cFCc0XmG083Ivqih/fWMFJBUOEsuwS3zPHkfgfhsvm7MqrK3vv psJIwnubwTVVQ3lePYJlnna6mijcRNXVAooRLiqylA3QPIYRxECDFVDRNwf39D+I bYp5tmlFcobugOUUoMqq1D/gH8EHUWxrnrsS6UBBpYm+cusc6u9/JXlOb4pcJGSL V340zQ0S9FNuEM3b+1kMAeq3DG2wLXv9oJzz/6EN59sx5AdjlYUPHd/PvTYOeG0T crdtDfL+7xcqP0Ms4SGTOD4kXSe6nErr3bIBHQXI6ZmJn0j//+3yU21kTMl95kM+ RM7nE4vItuQR0jPxVlhuLCcf3q7zMi+noOPZ1DVRTE1Yf9AizAgbPXyOE+jzGUUi 6E+0Mj6CLpFH/Mffxphs7L6GKwfWqaLjAupbjR6EWZud37KAwvpcB1CkJEgT9C4s OiZ4INTPxXmw9dX/T9CPOyh8oZ8mB9LTUzHoJDvDGuwYm7HE0U9pzHG4bP0mjIIt y3RboP78t1HC9oZUrxCoGhvekJtok0k3RLGJTSx9ujklY9MJGG/F1KEC6APp5tXu 0UToMXpgXSUkKEZesmsJFj/lbh1+h/yo5zTG5Hek8lh1K0sczaoWu3xTTSY9SSZQ ihlqyvdzSBweKo8ktU8A =9iA3 -----END PGP SIGNATURE----- Merge tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: "This is bit large pile of code which bring in some nice additions: - Error reporting: we have added a new mechanism for users of dmaenegine to register a callback_result which tells them the result of the dma transaction. Right now only one user (ntb) is using it. - As we discussed on KS mailing list and pointed out NO_IRQ has no place in kernel, this also remove NO_IRQ from dmaengine subsystem (both arm and ppc users) - Support for IOMMU slave transfers and its implementation for arm. - To get better build coverage, enable COMPILE_TEST for bunch of driver, and fix the warning and sparse complaints on these. - Apart from above, usual updates spread across drivers" * tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (169 commits) async_pq_val: fix DMA memory leak dmaengine: virt-dma: move function declarations dmaengine: omap-dma: Enable burst and data pack for SG DT: dmaengine: rcar-dmac: document R8A7743/5 support dmaengine: fsldma: Unmap region obtained by of_iomap dmaengine: jz4780: fix resource leaks on error exit return dma-debug: fix ia64 build, use PHYS_PFN dmaengine: coh901318: fix integer overflow when shifting more than 32 places dmaengine: edma: avoid uninitialized variable use dma-mapping: fix m32r build warning dma-mapping: fix ia64 build, use PHYS_PFN dmaengine: ti-dma-crossbar: enable COMPILE_TEST dmaengine: omap-dma: enable COMPILE_TEST dmaengine: edma: enable COMPILE_TEST dmaengine: ti-dma-crossbar: Fix of_device_id data parameter usage dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs dmaengine: edma: Rename set_bits and remove unused clear_bits helper dmaengine: edma: Use correct type for of_find_property() third parameter dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC) ...	2016-10-06 17:13:54 -07:00
Linus Torvalds	d880e5ad0d	remoteproc updates for v4.9 ... In addition to a slew of minor fixes and cleanups these patches refactors how we deal with remoteprocs that will be auto-booting themselves, this in itself do clean up the remote resource handling but opens for additional work to clarify responsibilities and life cycles of resources. We also revise how module locking of remoteproc drivers work, so that they are locked as we hand out references to them to third parties, rather than only when booted by anyone. In addition to this we also introduce the Qualcomm Wireless Subsystem remoteproc driver. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJX9Xl0AAoJEAsfOT8Nma3FwsMP/R44bOoIgKPF1ph9FfGn5gHC 1mgdSDBkWQgFeWE/hiDvL9YjPUwBZz9yhxzKw9aOuG21a6/53Hx164glC7Jumwgj 39dDtge4SRqJn83PbbRxMJdjFqrtjV1E2MWQXWYG76IS5CSH6xh884cInaoQZMk/ kL8eFOCzWIrE+PcntZh1LJ4+sOrDLAxeVEDT0V6KgefRs8/Ecn0BpUQChNS2hxpf cBduZBFYhaSLcsJsu75IQRJmSG1dcVDSfdheV+CylXd0ETcuQaYgEglx9S739dvS J0sr/4LZf9vUkM8gDRZoF9ZFkR8gj2lm6d7rLFijSdK65cvjiEF4I/0FCUyadjxU SQYa+7Q9sFAXbBaDrUdI1KTjaEgudlpl+AMb220Ulko6r2NRrfmyQNGmk9htbo1A DrWqMG176pcWus/GSBPVNvuBdUvS6qsCtTZCg87W6mZvdTxaoFPYppjfpuhm6D3v 3k6m5usFh7N9gF3QVoaA775qEbOsFGp8GX+/BvxFKgThQs4OQ6DXzi9qDTOs6W2Q iW8yMtv7PEncX/u4UvF8bFRD/Gy/1vTfm8DLuT4MBWkhu7q615m50bqX0godI0s6 5pqV0TPn9M93cOrWAqpdoLouypRHsEfh8ZE+Yuji6A1I2wAqM1HeLP4gvjau99nS Mqzqw/IE4jD4/EkELEli =nREP -----END PGP SIGNATURE----- Merge tag 'rproc-v4.9' of git://github.com/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "In addition to a slew of minor fixes and cleanups these patches refactor how we deal with remoteprocs that will be auto-booting themselves. That does clean up the remote resource handling but makes for additional work to clarify responsibilities and life cycles of resources. We also revise how module locking of remoteproc drivers work, so that they are locked as we hand out references to them to third parties, rather than only when booted by anyone. In addition to that we also introduce the Qualcomm Wireless Subsystem remoteproc driver" * tag 'rproc-v4.9' of git://github.com/andersson/remoteproc: (26 commits) remoteproc: Refactor rproc module locking remoteproc: Split driver and consumer dereferencing remoteproc: Correct resource handling upon boot failure remoteproc: Drop unnecessary NULL check remoteproc: core: transform struct fw_rsc_vdev_vring reserved field in pa remoteproc: Modify FW_RSC_ADDR_ANY definition remoteproc: qcom: wcnss: Fix return value check in wcnss_probe() remoteproc: qcom: Introduce WCNSS peripheral image loader dt-binding: remoteproc: Introduce Qualcomm WCNSS loader binding remoteproc: Only update table_ptr if we have a loaded table remoteproc: Move handling of cached table to boot/shutdown remoteproc: Move vdev handling to boot/shutdown remoteproc: Calculate max_notifyid during load remoteproc: Introduce auto-boot flag remoteproc/omap: revise a minor error trace message remoteproc/omap: fix various code formatting issues remoteproc: print hex numbers with a leading 0x format remoteproc: align code with open parenthesis remoteproc: fix bare unsigned type usage remoteproc: use variable names for sizeof() operator ...	2016-10-06 17:00:09 -07:00
Paul Burton	8ef3ff2723	dt-bindings: img-ascii-lcd: Document a binding for simple ASCII LCDs ... Add documentation for a devicetree binding for the simple ASCII LCD displays found on development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3 from Imagination Technologies. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14061/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>	2016-10-06 17:00:50 +02:00
Linus Torvalds	41844e3620	Staging/IIO patches for 4.9-rc1 ... Here is the big staging and IIO driver pull request for 4.9-rc1. There are a lot of patches in here, the majority due to the drivers/staging/greybus/ subsystem being merged in with full development history that went back a few years, in order to preserve the work that those developers did over time. This was done the same way that btrfs was merged into the tree, so all should be ok there. Lots and lots of tiny cleanups happened in the tree as well, due to the Outreachy application process and lots of other developers showing up for the first time to clean code up. Along with those changes, we deleted a wireless driver, and added a raspberrypi driver (currently marked broken), and lots of new iio drivers. Overall the tree still shrunk with more lines removed than added, about 10 thousand lines removed in total. Full details are in the very long shortlog below. All of this has been in the linux-next tree with no issues. There will be some merge problems with other subsystem trees, but those are all minor problems and shouldn't be hard to work out when they happen (MAINTAINERS and some lustre build problems with the IB tree.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iFYEABECABYFAlf0qWIPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfsp9GkAoLMa Dl/S8W02azDtKP893es5GXh3AJ4k8J9JlHgTS0RlzVJMvzkSZ2x7Vg== =j18s -----END PGP SIGNATURE----- Merge tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the big staging and IIO driver pull request for 4.9-rc1. There are a lot of patches in here, the majority due to the drivers/staging/greybus/ subsystem being merged in with full development history that went back a few years, in order to preserve the work that those developers did over time. Lots and lots of tiny cleanups happened in the tree as well, due to the Outreachy application process and lots of other developers showing up for the first time to clean code up. Along with those changes, we deleted a wireless driver, and added a raspberrypi driver (currently marked broken), and lots of new iio drivers. Overall the tree still shrunk with more lines removed than added, about 10 thousand lines removed in total. Full details are in the very long shortlog below. All of this has been in the linux-next tree with no issues. There will be some merge problems with other subsystem trees, but those are all minor problems and shouldn't be hard to work out when they happen (MAINTAINERS and some lustre build problems with the IB tree)" And furter from me asking for clarification about greybus: "Right now there is a phone from Motorola shipping with this code (a slightly older version, but the same tree), so even though Ara is not alive in the same form, the functionality is happening. We are working with the developers of that phone to merge the newer stuff in with their fork so they can use the upstream version in future versions of their phone product line. Toshiba has at least one chip shipping in their catalog that needs/uses this protocol over a Unipro link, and rumor has it that there might be more in the future. There are also other users of the greybus protocols, there is a talk next week at ELC that shows how it is being used across a network connection to control a device, and previous ELC talks have showed the protocol stack being used over USB to drive embedded Linux boards. I've also talked to some people who are starting to work to add a host controller driver to control arduinos as the greybus PHY protocols are very useful to control a serial/i2c/spio/whatever device across a random physical link, as it is a way to have a self-describing device be attached to a host without needing manual configuration. So yes, people are using it, and there is still the chance that it will show up in a phone/laptop/tablet/whatever from Google in the future as well, the tech isn't dead, even if the original large phone project happens to be" * tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits) Staging: fbtft: Fix bug in fbtft-core staging: rtl8188eu: fix double unlock error in rtw_resume_process() staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro staging:r8188eu: remove GEN_EVT_CODE macro staging:r8188eu: remove GEN_CMD_CODE macro staging:r8188eu: remove pkt_newalloc member of the recv_buf structure staging:r8188eu: remove rtw_handle_dualmac declaration staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros staging:r8188eu: change rtl8188e_process_phy_info function argument type Staging: fsl-mc: Remove blank lines Staging: fsl-mc: Fix unaligned * in block comments Staging: comedi: Align the * in block comments Staging : ks7010 : Fix block comments warninig Staging: vt6655: Remove explicit NULL comparison using Coccinelle staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants staging: rtl8188eu: core: rtw_xmit: Move constant of the right side staging: dgnc: Fix lines longer than 80 characters Staging: dgnc: constify attribute_group structures Staging: most: hdm-dim2: constify attribute_group structures ...	2016-10-05 14:50:51 -07:00
Mauro Carvalho Chehab	9fce0c2265	Linux 4.8 ... -----BEGIN PGP SIGNATURE----- iQEcBAABAgAGBQJX8Zc4AAoJEHm+PkMAQRiGQG8H/2Hd4IwJh75snGY5LAiWt6ra kGM/SobvLAMtcoxXCeHqf2bZrxa2Zz9tnEzhuLMGaf9a3l79xHa8YumK5KS1JPGV 6lZBvuPi8BIyT0cpYH000e5ehHfhP6pSGJKZ2EuLv43HcBeVZEGAf3/8jSAlNA15 bwFy2ZEkwJGThbnT6au0Y3s9h8LcNjtllu9hjfb+/9oNGvp8r4QhdVodIqIQ4cv6 SeUfv7Pn2LZDMCSaTP9bh2KaR4dwYZHFsVe75x2wND5Sfq7DVBBfFkAoV/RwJDTM gBc3PNnmzb/tix6ohOrSQnSiGsXv1uASxvHH3RD2zG6g7Aj9Eq/+Z7ZdPu2+o+U= =U+ef -----END PGP SIGNATURE----- Merge tag 'v4.8' into patchwork Linux 4.8 * tag 'v4.8': (1761 commits) Linux 4.8 ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page() MAINTAINERS: Switch to kernel.org email address for Javi Merino x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() x86/init: Fix cr4_init_shadow() on CR4-less machines MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS ...	2016-10-05 16:43:53 -03:00