Now that attribute groups support binary attributes, use them instead of
the dev_bin_attrs field in struct class, as that is going away soon.
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that attribute groups support binary attributes, use them instead of
the dev_bin_attrs field in struct class, as that is going away soon.
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that attribute groups support binary attributes, use them instead of
the dev_bin_attrs field in struct class, as that is going away soon.
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that attribute groups support binary attributes, use them instead of
the dev_bin_attrs field in struct class, as that is going away soon.
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that attribute groups support binary attributes, use them instead of
the dev_bin_attrs field in struct class, as that is going away soon.
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_attrs field of struct class is going away soon, dev_groups
should be used instead. This converts the roccat class code to use the
correct field.
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 407a2c2a4d.
Explanation provided by Benjamin Tissoires:
Commit "HID: hid-logitech-dj, querying_devices was never set" activate
a flag which guarantees that we do not ask the receiver for too many
enumeration. When the flag is set, each following enumeration call is
discarded (the usb request is not forwarded to the receiver). The flag
is then released when the driver receive a pairing information event,
which normally follows the enumeration request.
However, the USB3 bug makes the driver think the enumeration request
has been forwarded to the receiver. However, it is actually not the
case because the USB stack returns -EPIPE. So, when a new unknown
device appears, the workaround consisting in asking for a new
enumeration is not working anymore: this new enumeration is discarded
because of the flag, which is never reset.
A solution could be to trigger a timeout before releasing it, but for
now, let's just revert the patch.
Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Tested-by: Sune Mølgaard <sune@molgaard.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This changes puts the commit 4fe9f8e203 back in place
with the fixes for slab corruption because of the commit.
When a device is unplugged, wait for all processes that
have opened the device to close before deallocating the device.
This commit was solving kernel crash because of the corruption in
rb tree of vmalloc. The rootcause was the device data pointer was
geting excessed after the memory associated with hidraw was freed.
The commit 4fe9f8e203 was buggy as it was also freeing the hidraw
first and then calling delete operation on the list associated with
that hidraw leading to slab corruption.
Signed-off-by: Manoj Chourasia <mchourasia@nvidia.com>
Tested-by: Peter Wu <lekensteyn@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
GEN10 and earlier devices seem to not support DRM_KAI if we run in basic
IR mode. Use DRM_KAIE instead. This might increases overhead slightly as
the extension port is read and streamed but we stream accelerometer data
constantly, too, so this is negligible.
Note that our parsers are hardcoded on IR-formats, so we cannot actually
use 96-bit IR DRMs for basic IR data. We would have to adjust the parsers.
But as only GEN20 and newer support this, we simply avoid mixed DRMs.
This fixes a bug where GEN10 devices didn't provide IR data if
accelerometer and IR are enabled simultaneously. As a workaround, you can
enable DRM_KAIE without this patch via (disables device power-management):
echo "37" >/sys/kernel/debug/hid/<dev>/drm
Cc: stable@vger.kernel.org
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reported-by: Nicolas Adenis-Lamarre <nicolas.adenis.lamarre@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no need to pass constants via stack. The width may be explicitly
specified in the format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no need to pass constants via stack. The width may be explicitly
specified in the format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove HV_DRV_VERSION, it has no meaning for upstream drivers.
Initially it was supposed to show the "Linux Integration Services"
version, now it is not in sync anymore with the out-of-tree drivers
available from the MSFT website.
The only place where a version string is still required is the KVP
command "IntegrationServicesVersion" which is handled by
tools/hv/hv_kvp_daemon.c. To satisfy such KVP request from the host pass
the current string to the daemon during KVP userland registration.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mutex can not be released unless all hid_device members are properly
initialized. Otherwise it would result in a race condition that can
cause NULL pointer kernel panic issue in hidraw_open where it uses
uninitialized 'list' member in list_add_tail().
Signed-off-by: Yonghua Zheng <younghua.zheng@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add device tree based support for HID over I2C devices.
Tested on an Odroid-X board with a Synaptics touchpad.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hidinput_input_event() callback converts input events written from
userspace into HID reports and sends them to the device. We currently
implement this in every HID transport driver, even though most of them do
the same.
This provides a generic hidinput_input_event() implementation which is
mostly copied from usbhid. It uses a delayed worker to allow multiple LED
events to be collected into a single output event.
We use the custom ->request() transport driver callback to allow drivers
to adjust the outgoing report and handle the request asynchronously. If no
custom ->request() callback is available, we fall back to the generic raw
output report handler (which is synchronous).
Drivers can still provide custom hidinput_input_event() handlers (see
logitech-dj) if the generic implementation doesn't fit their needs.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID core provides the same functionality and can convert the input event
to a raw output report. We can thus drop UHID_OUTPUT_EV and rely on the
mandatory UHID_OUTPUT.
User-space wasn't able to do anything with UHID_OUTPUT_EV, anyway. They
don't have access to the report fields.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID core provides the same functionality, so drop the custom handler.
Besides, the current handler doesn't schedule any outgoing report so it
did not work, anyway.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID core provides the same functionality as we do, so drop the custom
hidinput_input_event() handler.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Report fields can be updated from HID drivers unlocked via
hid_set_field(). It is protected by input_lock in HID core so only a
single input event is handled at a time. USBHID can thus update the field
unlocked and doesn't conflict with any HID vendor/device drivers. Note,
many HID drivers make heavy use of hid_set_field() in that way.
But usbhid also schedules a work to gather multiple LED changes in a
single report. Hence, we used to lock the LED field update so the work can
read a consistent state. However, hid_set_field() only writes a single
integer field, which is guaranteed to be allocated all the time. So the
worst possible race-condition is a garbage read on the LED field.
Therefore, there is no need to protect the update. In fact, the only thing
that is prevented by locking hid_set_field(), is an LED update while the
scheduled work currently writes an older LED update out. However, this
means, a new work is scheduled directly when the old one is done writing
the new state to the device. So we actually _win_ by not protecting the
write and allowing the write to be combined with the current write. A new
worker is still scheduled, but will not write any new state. So the LED
will not blink unnecessarily on the device.
Assume we have the LED set to 0. Two request come in which enable the LED
and immediately disable it. The current situation with two CPUs would be:
usb_hidinput_input_event() | hid_led()
---------------------------------+----------------------------------
spin_lock(&usbhid->lock);
hid_set_field(1);
spin_unlock(&usbhid->lock);
schedule_work(...);
spin_lock(&usbhid->lock);
__usbhid_submit_report(..1..);
spin_unlock(&usbhid->lock);
spin_lock(&usbhid->lock);
hid_set_field(0);
spin_unlock(&usbhid->lock);
schedule_work(...);
spin_lock(&usbhid->lock);
__usbhid_submit_report(..0..);
spin_unlock(&usbhid->lock);
With the locking removed, we _might_ end up with (look at the changed
__usbhid_submit_report() parameters in the first try!):
usb_hidinput_input_event() | hid_led()
---------------------------------+----------------------------------
hid_set_field(1);
schedule_work(...);
spin_lock(&usbhid->lock);
hid_set_field(0);
schedule_work(...);
__usbhid_submit_report(..0..);
spin_unlock(&usbhid->lock);
... next work ...
spin_lock(&usbhid->lock);
__usbhid_submit_report(..0..);
spin_unlock(&usbhid->lock);
As one can see, we no longer send the "LED ON" signal as it is disabled
immediately afterwards and the following "LED OFF" request overwrites the
pending "LED ON".
It is important to note that hid_set_field() is not atomic, so we might
also end up with any other value. But that doesn't matter either as we
_always_ schedule the next work with a correct value and schedule_work()
acts as memory barrier, anyways. So in the worst case, we run
__usbhid_submit_report(..<garbage>..) in the first case and the following
__usbhid_submit_report() will write the correct value. But LED states are
booleans so any garbage will be converted to either 0 or 1 and the remote
device will never see invalid requests.
Why all this? It avoids any custom locking around hid_set_field() in
usbhid and finally allows us to provide a generic hidinput_input_event()
handler for all HID transport drivers.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
usbhid_set_leds() is only used inside of usbhid/hid-core.c so no need to
export it.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID special drivers can use safely the devres API.
Use it to remove 25 lines of code and to clean up a little the error paths.
Besides the basic kzalloc -> devm_kzalloc conversions, I changed the
place of the allocation of the new name. Doing this right in
mt_input_configured() removes the kstrdup call which was not very helpful
and the new way is simpler to understand (and to debug).
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is safe to use devres allocation within the hid subsystem:
- the devres release is called _after_ the call to .remove(), meaning
that no freed pointers will exists while removing the device
- if a .probe() fails, devres releases all the allocated ressources
before going to the next driver: there will not be ghost ressources
attached to a hid device if several drivers are probed.
Given that, we can clean up a little some of the HID drivers. These ones
are trivial:
- there is only one kzalloc in the driver
- the .remove() callback contains only one kfree on top of hid_hw_stop()
- the error path in the probe is easy enough to be manually checked
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver currently only supports the Dual Arcade controller.
It fixes the negative axis event values (the devices sends -2) to match the
logical axis minimum of the HID report descriptor (the report announces -1).
It is needed because hid-input discards out of bounds values.
Signed-off-by: Olivier Scherler <oscherler@ithink.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit f04d51404f (HID: driver for PS2/3 Buzz controllers) introduced
an input_mapping() callback, but set the return value to -1 to all devices
except the Buzz controllers. The result of this is that the Sixaxis input
device is not populated, making it useless.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Set querying_devices flag to true when we start the enumeration
process.
This was missing from the original patch. It never produced
undesirable effects as it is highly improbable to have a second
enumeration triggered while a first one was still in progress.
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 8af6c08830.
This patch re-adds the workaround introduced by 596264082f
which was reverted by 8af6c08830.
The original patch 596264 was needed to overcome a situation where
the hid-core would drop incoming reports while probe() was being
executed.
This issue was solved by c849a6143b which added
hid_device_io_start() and hid_device_io_stop() that enable a specific
hid driver to opt-in for input reports while its probe() is being
executed.
Commit a9dd22b730 modified hid-logitech-dj so as to use the
functionality added to hid-core. Having done that, workaround 596264
was no longer necessary and was reverted by 8af6c08.
We now encounter a different problem that ends up 'again' thwarting
the Unifying receiver enumeration. The problem is time and usb controller
dependent. Ocasionally the reports sent to the usb receiver to start
the paired devices enumeration fail with -EPIPE and the receiver never
gets to enumerate the paired devices.
With dcd9006b1b the problem was "hidden" as the call to the usb
driver became asynchronous and none was catching the error from the
failing URB.
As the root cause for this failing SET_REPORT is not understood yet,
-possibly a race on the usb controller drivers or a problem with the
Unifying receiver- reintroducing this workaround solves the problem.
Overall what this workaround does is: If an input report from an
unknown device is received, then a (re)enumeration is performed.
related bug:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1194649
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
implement() is setting bytes in LE data stream. In case the data is not
aligned to 64bits, it reads past the allocated buffer. It doesn't really
change any value there (it's properly bitmasked), but in case that this
read past the boundary hits a page boundary, pagefault happens when
accessing 64bits of 'x' in implement(), and kernel oopses.
This happens much more often when numbered reports are in use, as the
initial 8bit skip in the buffer makes the whole process work on values
which are not aligned to 64bits.
This problem dates back to attempts in 2005 and 2006 to make implement()
and extract() as generic as possible, and even back then the problem
was realized by Adam Kroperlin, but falsely assumed to be impossible
to cause any harm:
http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html
I have made several attempts at fixing it "on the spot" directly in
implement(), but the results were horrible; the special casing for processing
last 64bit chunk and switching to different math makes it unreadable mess.
I therefore took a path to allocate a few bytes more which will never make
it into final report, but are there as a cushion for all the 64bit math
operations happening in implement() and extract().
All callers of hid_output_report() are converted at the same time to allocate
the buffer by newly introduced hid_alloc_report_buf() helper.
Bruno noticed that the whole raw_size test can be dropped as well, as
hid_alloc_report_buf() makes sure that the buffer is always of a proper
size.
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Genius Gx Imperator Keyboard presents the same problem in its report
descriptors than Genius Gila Gaming Mouse.
Use the same fixup for both.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=928561
Reported-and-tested-by: Honza Brazdil <jbrazdil@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When device with the DELIMITER tag in its report descriptor is encountered
during parsing, it's mistakenly immediately refused by HID core for no
justifiable reason.
[jkosina@suse.cz: polish changelog]
Signed-off-by: Paul Chavent <paul.chavent@onera.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use the inlined helpers hid_hw_open/close instead of direct calls to
->ll_driver->open() and ->ll_driver->close().
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull input updates from Dmitry Torokhov:
"First round of updates for the input subsystem.
You will get a new touchsreen driver for Cypress 4th generation
devices, a driver for a special controller implementing PS/2 protocol
in OLPC devices, and a driver for power key for SiRFprimaII PWRC.
HID and bcm5497 now support for the 2013 MacBook Air.
EVIOCGKEY and the rest of evdev ioctls now flush events of matching
type from the client's event queue so that clients can be sure any
events received after issuing EVIOCG* ioctl are new events.
And a host of cleanups and improvements in other drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
Input: cyttsp4 - kfree xfer_buf on error path in probe()
Input: tps6507x-ts - select INPUT_POLLDEV
Input: bcm5974 - add support for the 2013 MacBook Air
HID: apple: Add support for the 2013 Macbook Air
Input: cyttsp4 - leak on error path in probe()
Input: cyttsp4 - silence NULL dereference warning
Input: cyttsp4 - silence shift wrap warning
Input: tps6507x-ts - convert to polled input device infrastructure
ARM: davinci: da850-evm: remove vref from touchscreen platform data
Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devices
Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devices
Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices
Input: cyttsp - I2C driver split into two modules
Input: add OLPC AP-SP driver
Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe()
Input: tps6507x-ts - remove vref from platform data
Input: tps6507x-ts - use bool for booleans
Input: tps6507x-ts - remove bogus unreachable code
Input: samsung-keypad - let device core setup the default pin configuration
Input: wacom_i2c - implement hovering capability
...
Intuos4 WL is separately reporting power supply and battery
charging status - now hid-wacom is using that information.
Previously hid-wacom was wrongly treating "battery charging" bit
as "power supply connected". Now it should report battery charging,
battery discharging, battery full and power supply status.
Intuos4 WL sends reports when is in use (obvious) and when unplugging
power supply. If means that if the device is being charged, but it's not
being used it will never report "battery full". The same problem happens
after the device has been connected, but it's not in use - the
battery/ac status will be incorrect. Currently there is no mechanism to
ask the device to send a report containing battery/ac status.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The current i2c hid driver does not support sending HID output reports using
the output register for devices which support receiving reports through this
method. This patch determines which method to use to send output reports based
on the value of wMaxOutputLength in the device's HID descriptor.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8
(0x0291, 0x0292, 0x0293). The touchpad is handled in a separate
bcm5974 patch, as usual.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Wii U Pro Controller is a new Nintendo remote device that looks very
similar to the XBox controller. It has nearly the same features and uses
the same protocol as the Wii Remote.
We add a new wiimote extension device so the Pro Controller is properly
detected and supported.
The device reports MP support, which is odd and I couldn't get it working,
yet. Hence, we disable MP registers for now. Further investigation is
needed to see what extra capabilities are provided.
There are some other unknown bits in the extension reports that I couldn't
figure out what they do. You can use hidraw to access these if you're
interested.
We might want to hook up the "charging" and "USB" bits to the battery
device so user-space can query whether it is currently charged via USB.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Extend the comment explaining the condition for discarding
out-of-range values to clarify the cases in which devices don't
provide any logical min/max.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 6da7066906 introduced in 3.3
"HID: ignore absolute values which don't fit between logical min and max"
prevents some Posiflex touch screen to work because they do not provide
logical min and max for their buttons.
Thus, logical min and max are at 0, discarding the buttons events, and
preventing the device to report appropriate X Y.
Adding a check on "min < max" solves the problem.
Reported-by: Jan Kandziora <jjj@gmx.de>
Tested-by: Jan Kandziora <jjj@gmx.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Return value of cdev_add in hid_roccat.c init was not checked.
Signed-off-by: Michael Rissi <michael.rissi@dectris.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Let's follow the structure we are trying to keep for most of the
specific HID drivers, and let the separation follow the producing
vendor.
Merge functionality provided by ps3remote driver into hid-sony.
Tested-by: David Dillow <dave@thedillows.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
mt_free_input_name() was never called during .remove():
hid_hw_stop() removes the hid_input items in hdev->inputs, and so the
list is therefore empty after the call. In the end, we never free the
special names that has been allocated during .probe().
Restore the original name before freeing it to avoid acessing already
freed pointer.
This fixes a regression introduced by 49a5a827a ("HID: multitouch: append " Pen" to
the name of the stylus input")
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hdrw->raw event can return three different return value types:
- ret < 0 indicates that the hdrv driver found an error while parsing
- ret == 0 indicates no error has been encountered, and the driver has
processed the report
- ret > 0 indicates that there was no parsing error, and the driver hasn't
processed the event.
Calling hid_report_raw_event() has to be called appropriately so that it
reflects what has been done by ->raw_event() callback, otherwise we might
updates of the in-kernel structure are lost upon arrival of the report, which
is wrong.
Reported-and-tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-and-tested-by: Daniel Leung <daniel.leung@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If an extension device isn't initialized properly, or during hardware
initialization, a device might send extension data which is all 0xff.
This is ambigious because this is also a valid normal data report. But
it is impossible, under normal conditions, to trigger valid reports with
all 0xff. Hence, we can safely ignore them.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I finally got a "Classic Controller" and "Classic Controller Pro" in my
hands and noticed that all analog data was incorrectly parsed. Fix this
up so we report the data that we pretend we do.
I really doubt that this breaks any backwards compatibility, but if we
get any reports, we only need to revert this single patch.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We normally get EXT hotplug events or poll for MP hotplugging so we
don't need to force extension port initialization during device setup.
But for gen20 devices, we disable MP polling because MP is always
present. However, this prevents MP initialization during device setup
and users need to plug another extension to trigger EXT/MP detection.
Therefore, we now trigger EXT/MP detection during device setup
automatically. This also avoids slightly delayed extension detection
and provides sysfs child-devices prior to the "changed"-uevent during
device setup.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We need to correctly zero-terminate the input to parse it. Otherwise, we
always end up interpreting it as numbers.
Furthermore, we actually want hexadecimal numbers instead of decimal. As
it is a debugfs interface, we can change the API at any time.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Devices which have built-in motion plus ports don't need MP detection
logic. The new WIIMOD_BUILTIN_MP modules sets the WIIPROTO_FLAG_BUILTIN_MP
flag which disables polling for MP.
Some other devices erroneously report that they support motion-plus. For
these devices and all devices without extension ports, we load
WIIMOD_NO_MP which sets WIIPROTO_FLAG_NO_MP. This effectively disables all
MP detection logic.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We now have dynamic hotplug support so the old static extensions are no
longer needed nor used. Remove it along CONFIG_HID_WIIMOTE_EXT.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Balance-Boards provide 3 16bit calibration values for each of the 4
sensors. We provide these now as 192bit value via a new "bboard_calib"
sysfs attribute.
We also re-read the calibration data from the device whenever user-space
attempts to read this file. On normal Nintendo boards, this always
produces the same results, however, on some 3rd party devices these values
change until the device is fully initialized. As I have currently no idea
how long to wait until it's ready (sometimes takes up to 10s?) we provide
a simple workaround for users by reading this file.
If we, at some point, figure out how it works, we can implement it in the
kernel and provide offline data via "bboard_calib". This won't break
user-space then.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Two new attributes, "extension" and "devtype" now allow user-space to read
the extension type and device type. As device detection is asynchronous,
we send a CHANGED event after it is done. This also allows user-space to
wait for a device to settle before opening its input event devices.
The "extension" device is compatible with the old "extension" sysfs field
(which was registered by the static extension support code).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If we write a DRM mode via debugfs, we shouldn't allow normal operations
to overwrite this DRM mode. This is important if we want to debug
3rd-party devices and we want to see what data is sent on each mode.
If we write NULL/0 as DRM, the lock is removed again so the best matching
DRM is chosen by wiimote core.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
single_open() stores the seq_file pointer in file->private_data. It stores
our ctx pointer in seq_file->private.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add parsers for motion plus data so we can hotplug motion plus extensions
and make use of them. This is mostly the same as the old static motion
plus parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a new extension module for the classic controller so we get hotplug
support for this device. It is mostly the same as the old static classic
controller parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This moves the nunchuk parser over to an extension module. This allows to
make use of hotplugged Nunchuks instead of the old static parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds Nintendo Wii Balance Board support to the new HOTPLUG capable
wiimote core. It is mostly copied from the old extension.
This also adds Balance Board device detection. Whenever we find a device
that supports the balance-board extension, we assume that it is a real
balance board and disable unsupported hardward like accelerometer, IR,
rumble and more.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Wii Remote has several extension ports. The first port (EXT) provides
hotplug events whenever an extension is plugged. The second port (MP)
does not provide hotplug events by default. Instead, we have to map MP
into EXT to get events for it.
This patch introduces hotplug support for extensions. It is fairly
complicated to get this right because the Wii Remote sends a lot of
noise-hotplug events while activating extension ports. We need to filter
the events and only handle the events that are real hotplug events.
Mapping MP into EXT is easy. But if we want both, MP _and_ EXT at the same
time, we need to map MP into EXT and enable a passthrough-mode. This will
then send real EXT events through the mapped MP interleaved with real MP
events. But once MP is mapped, we no longer have access to the real EXT
registers so we need to perform setup _before_ mapping MP. Furthermore, we
no longer can read EXT IDs so we cannot verify if EXT is still the same
extension that we expect it to be.
We deal with this by unmapping MP whenever we got into a situation where
EXT might have changed. We then re-read EXT and MP and remap everything.
The real Wii Console takes a fairly easy approach: It simply reconnects to
the device on hotplug events that it didn't expect. So if a program wants
MP events, but MP is disconnected, it fails and reconnects so it can wait
for MP hotplug events again.
This simplifies hotplugging a lot because we just react on PLUG events and
ignore UNPLUG events.
The more sophisticated Wii applications avoid reconnection (well, they
still reconnect during many weird events, but at least not during UNPLUG)
but they start polling the device. This allows them to disable the device,
poll for the extension ports to settle and then initialize them again.
Unfortunately, this approach fails whenever an extension is replugged
while it is initialized. We would loose UNPLUG events and polling the
device later will give unreliable results because the extension port might
be in some weird state, even though it's actually unplugged.
Our approach is a real HOTPLUG approch. We keep track of the EXT and
mapped MP hotplug events whenever they occur. We then re-evaluate the
device state and initialize any possible new extension or deinitialize any
gone extension. Only during initialization, we set an extension port
ACTIVE. However, during an unplug event we mark them as INACTIVE. This
guarantess that a fast UNPLUG -> PLUG event sequence doesn't keep them
marked as PLUGGED+ACTIVE but only PLUGGED.
To deal with annoying noise-hotplug events during extension mapping, we
simply rescan the device before performing any mapping. This allows us to
ignore all the noise events as long as the device is in the correct state.
Long story short: EXT and MP registers are sparsely known and we need to
jump through hoops to get reliable HOTPLUG working. But while Nintendo
needs *FOUR* Bluetooth reconnections for the shortest imaginable
boot->menu->game->menu->shutdown sequence, we now need *ZERO*.
As always, 3rd party devices tend to break whenever we behave differently
than the original Wii. So there are also devices which _expect_ a
disconnect after UNPLUG. Obviously, these devices won't benefit from this
patch. But all official devices were tested extensively and work great
during any hotplug sequence. Yay!
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
IR is the last piece that still is handled natively. This patch converts
it into a sub-device module like all other sub-devices. It mainly moves
code and doesn't change semantics.
We also implicitly sync IR data on ir_to_input3 now so the explicit
input_sync() calls are no longer needed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Accelerometer data is very similar to KEYS handling. Therefore, convert
all ACCEL related handling into a sub-device module similar to KEYS.
This doesn't change any semantics but only moves code over to
wiimote-modules.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Each of the 4 LEDs may be supported individually by devices. Therefore,
we need one module for each device. To avoid code-duplication, we simply
pass the LED ID as "arg" argument to the module loading code.
This just moves the code over to wiimote-module. The semantics stay the
same as before.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This introduces a new sub-device module for the BATTERY handlers. It
moves the whole power_supply battery handling over to wiimote-modules.
This doesn't change any semantics or ABI but only converts the battery
handling into a sub-device module.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This introduces the first sub-device modules by converting the KEYS and
RUMBLE sub-devices into wiimote modules. Both must be converted at once
because they depend on the built-in shared input device.
This mostly moves code from wiimote-core to wiimote-modules and doesn't
change any semantics or ABI.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
To avoid loading all sub-device drivers for every Wii Remote, even though
the required hardware might not be available, we introduce a module layer.
The module layer specifies which sub-devices are available on each
device-type. After device detection, we only load the modules for the
detected device. If module loading fails, we unload everything and mark
the device as WIIMOTE_DEV_UNKNOWN. As long as a device is marked as
"unknown", no sub-devices will be used and the device is considered
unsupported.
All the different sub-devices, including KEYS, RUMBLE, BATTERY, LEDS,
ACCELEROMETER, IR and more will be ported in follow-up patches to the new
module layer.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Our output queue is asynchronous but synchronous reports may wait for a
response to their request. Therefore, wake them up unconditionally if an
output report couldn't be sent. But keep the report ID intact so we don't
incorrectly assume our request succeeded.
Note that the underlying connection is required to be reliable and does
retransmission itself. So it is safe to assume that if the transmission
fails, the device is in inconsistent state. Hence, we abort every request
if any output report fails. No need to verify which report failed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery reports are sent along every status report of the Wii Remote.
So chances are pretty high that we have an up-to-date battery
cache at any time. Therefore, initialize the battery-cache to 100% and
then return battery values from the cache if the query fails.
This works around a power_supply limitation in that it requires us to be
able to query the device during power_supply registration and
removal. Otherwise, "add" or "remove" udev events are not sent. If
we answer these requests from our cache instead, we avoid dropping these
events and no longer cause warnings printed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Nintendo produced many different devices that are internally based on the
Wii Remote protocol but provide different peripherals. To support these
devices, we need to schedule a device detection during initialization.
Device detection includes requesting a status report, reading extension
information and then evaluating which device we may be dealing with.
We currently detect gen1 and gen2 Wii Remote devices. All other devices
are marked as generic devices. More detections will be added later.
In followup patches we will be using these device IDs to control which
peripherals to initialize. For instance if a device is known to have no IR
camera, there is no need to provide the IR input device nor trying to
access IR registers. In fact, there are 3rd party devices that break if we
try things like this (hurray!).
The init_worker will be scheduled whenever we get hotplug events. This
isn't implemented, yet and will be added later. However, we need to make
sure that this worker can be called multiple times.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We need constant I/O to keep the state up-to-date and not miss any
packets. Hence, call hid_hw_open() during setup and hid_hw_close() during
destruction.
These are no-ops for Bluetooth HIDP, but lets be safe.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The output queue is independent of the other wiimote modules and can run
on its own. Therefore, move its members into a separate struct so we don't
run into name collisions with other modules.
This is only a syntactic change that renames all queue members to queue.*.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hid-wiimote driver supports more than the Wii Remote. Nintendo
produced many devices based on the Wii Remote, which have extension
devices built-in. It is not clear to many users, that these devices have
anything in common with the Wii Remote, so fix the driver description.
This also updates the copyright information for the coming hotplugging
rework.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
power_supply core has the bad habit of calling our battery callbacks
from within power_supply_register(). Furthermore, if the callbacks
fail with an unhandled error code, it will skip any uevent that it
might currently process.
So if HID-core registers battery devices, an "add" uevent is generated
and the battery callbacks are called. These will gracefully fail due
to timeouts as they might still hold locks on event processing. One
could argue that this should be fixed in power_supply core, but the
least we can do is to signal ENODATA so power_supply core will just
skip the property and continue with the uevent.
This fixes a bug where "add" and "remove" uevents are skipped for
battery devices. upower is unable to track these devices and currently
needs to ignore them.
This patch also overwrites any other error code. I cannot see any reason
why we should forward protocol- or I/O-errors to the power_supply core.
We handle these errors in hid_ll_driver later, anyway, so just skip
them. power_supply core cannot do anything useful with them, anyway,
and we avoid skipping important uevents and confusing user-space.
Thanks a lot to Daniel Nicoletti for pushing and investigating
on this.
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Reported-by: Daniel Nicoletti <dantti12@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
One firmare version in the devices the driver takes care of is
completely broken and needs periodic pokes from our side. We
implemented this as a periodic delayed queue. The idea of the pokes
was taken from the suse enterprise kernel, in particular from Libor's
"Elo touchscreen firmware M workaround".
I am quoting him here:
This patch adds periodic polling of the Elo USB touchscreens. Needed
as a workaround for devices with M-level firmware, otherwise these
devices are known to misbehave (as reported by Elo developers).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: Petr Ostadal <postadal@suse.cz>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Egbert Eich <eich@suse.com>
Cc: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is a driver for ELO 4000/4500 devices which report themselves as
HID devices, but do not really send HID events on touch. So we
introduce a new HID 'quirk' driver with a raw_event handler where we
take care of those events.
What we need additionally is an input_configured hook, because the
device does not mention anything about PRESSURE and TOUCH in its
report descriptor, but it actually generate those. So we set the bits
in the corresponding input_dev in that hook.
Thanks to Petr Ostadal who was willing to test the driver. The rest of
Cc's listed below had something to do with that driver over the years
in our enterprise tree.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: Petr Ostadal <postadal@suse.cz>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Egbert Eich <eich@suse.com>
Cc: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add hid-huion.c with support for Huion 580 tablet, which is simple
8x5" tablet with 4000LPI resolution and 2048 levels pressure-sensitive
pen manufactured by the Chinese company Huion.
The driver fixes incorrect report descriptor sent by the device,
performs custom initialization required to switch the tablet into
its native resolution mode and inverts the in-range bit.
Signed-off-by: Martin Rusko <martin.rusko@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This mouse is sold as Tracer Sniper TRM-503, NOVA Gaming Slider X200 and
Zalman ZM-GM1, and reports too high usage maximum and logical maximum
(like 04d9:a067, but its report descriptor is different). This patch
adds its USB ID and fixes the report descriptor in the same way.
Note: I don't actually have such a mouse to test, I took the report
descriptor posted at https://bugzilla.novell.com/show_bug.cgi?id=774676,
compared it to the one from 04d9:a067 and changed the offsets
accordingly (all numbers minus 9, since it is 9 bytes shorter, and the
difference is before the values that need changing). That Surely Works™.
Signed-off-by: Christian Ohm <chr.ohm@gmx.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This mouse is sold as Sharkoon Drakonia and Perixx MX-2000 and reports a
too high usage maximum and logical maximum. This driver fixes the report
descriptor so those values don't exceed HID_MAX_USAGES.
Signed-off-by: Christian Ohm <chr.ohm@gmx.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The newly added support for Buzz controller
- introduced Kconfig selection of LEDS_CLASS
- introduced conditional preprocessor checking for CONFIG_LEDS_CLASS
This has multiple problems -- namely select doesn't work transitively,
so it shouldn't be used. On the other hand the code assumed that LEDS_CLASS
is enabled in some places, but not everywhere.
Put LEDS_CLASS as a Kconfig dependency for hid-sony and remove all the
CONFIG_LEDS_CLASS conditionals from hid-sony.
Reported-by: fengguang.wu@intel.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for PS2/3 Buzz controllers into hid-sony
It has been tested on Debian 7 with kernel version 3.10.0-rc2. Unfortunately
I can't test the patch with a regular six-axis controller myself.
Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a quirk to ignore Jabra speakerphone 410 and 510 devices HID
interface.
On those devices, the USB audio interface is working nicely,
but the HID interface is not working with the kernel usbhid driver,
and it requires a specific userspace program.
We could unbind it from userspace but just attaching the usbhid driver has
sometimes nasty effects:
either confusing the device state machine or triggering a storm of volume key
events making eventual sound UI blinking like crazy.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch also removes the duplicate entry in the hid-multitouch.c as
suggested by Benjamin Tissoires.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Just sort the list by IDs. There is no functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add vendor ID for Data Modul and their easyMaxTouch device.
The device has to be configured to multitouch mode prior to using this driver.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes 'undefined reference' issue when hid-steelseries is built in,
but led-class is a module.
--
drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to `led_classdev_unregister'
drivers/built-in.o: In function `steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to `led_classdev_register'
hid-steelseries.c:(.text+0x3b9ce5): undefined reference to `led_classdev_register'
hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister'
--
Patch allows LED control when led-class is built in, or both hid-steelseries
_and_ led-class are both modules.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It looks like the manual merge 0d69a3c731 ("Merge
branches 'for-3.9/sony' and 'for-3.9/steelseries' into for-linus") accidentally
removed Sony RF receiver with USB product id 0x0374 from the "have special
driver" list, effectively nullifying a464918419
("HID: add support for Sony RF receiver with USB product id 0x0374"). Add the
device back to the list.
Cc: stable@vger.kernel.org
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- hid driver transport cleanup, finalizing the long-desired decoupling
of core from transport layers, by Benjamin Tissoires and Henrik
Rydberg
- support for hybrid finger/pen multitouch HID devices, by Benjamin
Tissoires
- fix for long-standing issue in Logitech unifying driver sometimes not
inializing properly due to device specifics, by Andrew de los Reyes
- Wii remote driver updates to support 2nd generation of devices, by
David Herrmann
- support for Apple IR remote
- roccat driver now supports new devices (Roccat Kone Pure, IskuFX), by
Stefan Achatz
- debugfs locking fixes in hid debug interface, by Jiri Kosina
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (43 commits)
HID: protect hid_debug_list
HID: debug: break out hid_dump_report() into hid-debug
HID: Add PID for Japanese version of NE4K keyboard
HID: hid-lg4ff add support for new version of DFGT wheel
HID: icade: u16 which never < 0
HID: clarify Magic Mouse Kconfig description
HID: appleir: add support for Apple ir devices
HID: roccat: added media key support for Kone
HID: hid-lenovo-tpkbd: remove doubled hid_get_drvdata
HID: i2c-hid: fix length for set/get report in i2c hid
HID: wiimote: parse reduced status reports
HID: wiimote: add 2nd generation Wii Remote IDs
HID: wiimote: use unique battery names
HID: hidraw: warn if userspace headers are outdated
HID: multitouch: force BTN_STYLUS for pen devices
HID: multitouch: append " Pen" to the name of the stylus input
HID: multitouch: add handling for pen in dual-sensors device
HID: multitouch: change touch sensor detection in mt_input_configured()
HID: multitouch: do not map usage from non used reports
HID: multitouch: breaks out touch handling in specific functions
...
