Commit Graph

30 Commits

Author SHA1 Message Date
Yinghai Lu
0f1103e40f x86/PCI: fix unused variable warning in amd_bus.c
Fix this warning:

  arch/x86/pci/amd_bus.c: In function 'early_fill_mp_bus_info':
  arch/x86/pci/amd_bus.c:56:6: warning: unused variable 'j' [-Wunused-variable]

introduced by commit d28e5ac2a0 ("x86/PCI: dynamically allocate
pci_root_info for native host bridge drivers").

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-01 17:25:18 -06:00
Yinghai Lu
d28e5ac2a0 x86/PCI: dynamically allocate pci_root_info for native host bridge drivers
This dynamically allocates struct pci_root_info instead of using a
static array.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30 14:52:43 -06:00
Bjorn Helgaas
24d25dbfa6 x86/PCI: amd: factor out MMCONFIG discovery
This factors out the AMD native MMCONFIG discovery so we can use it
outside amd_bus.c.

amd_bus.c reads AMD MSRs so it can remove the MMCONFIG area from the
PCI resources.  We may also need the MMCONFIG information to work
around BIOS defects in the ACPI MCFG table.

Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org       # 2.6.34+
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06 12:11:19 -08:00
Andreas Herrmann
ca3671a833 x86/PCI: amd: Kill misleading message about enablement of IO access to PCI ECS]
Commit 24d9b70b8c (x86: Use PCI method
for enabling AMD extended config space before MSR method) added a
message when IO access to PCI ECS was enabled via access to the NB_CFG
PCI register.  This can lead to a bogus message like

[    0.365177] Extended Config Space enabled on 0 nodes

which is misleading because IO ECS access is subsequently enabled for
AMD CPUs (that support this) by modifying the corresponding NB_CFG
MSR.

Furthermore it's not "Extended Config Space" that is enabled by this
register setting. It's the IO access that is enabled for extended
configruation space.

IMHO the ambiguous message needs to be cancelled.

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Robert Richter <robert.richter@amd.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06 12:10:48 -08:00
Jan Beulich
691269f0d9 x86: Adjust section placement in AMD northbridge related code
amd_nb_misc_ids[] can live in .rodata, and enable_pci_io_ecs()
can be moved into .cpuinit.text.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: Andreas Herrmann <Andreas.Herrmann3@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <4D525DDD0200007800030F07@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-10 13:32:52 +01:00
Jan Beulich
24d9b70b8c x86: Use PCI method for enabling AMD extended config space before MSR method
While both methods should work equivalently well for the native
case, the Xen Dom0 case can't reliably work with the MSR one,
since there's no guarantee that the virtual CPUs it has
available fully cover all necessary physical ones.

As per the suggestion of Robert Richter the patch only adds the
PCI method, but leaves the MSR one as a fallback to cover new
systems the PCI IDs of which may not have got added to the code
base yet.

The only change in v2 is the breaking out of the new CPI
initialization method into a separate function, as requested by
Ingo.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Robert Richter <robert.richter@amd.com>
Cc: Andreas Herrmann3 <Andreas.Herrmann3@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <4D2B3FD7020000780002B67D@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-11 12:43:41 +01:00
Yinghai Lu
e9a0064ad0 x86: Change range end to start+size
So make interface more consistent with early_res.
Later we can share some code with early_res.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-10-git-send-email-yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:47:17 -08:00
Yinghai Lu
284f933d45 x86/pci: Enable pci root res read out for 32bit too
Should be good for 32bit too.

-v3: cast res->start
-v4: according to Linus, to use %pR instead of cast

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-9-git-send-email-yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:47:17 -08:00
Yinghai Lu
9ad3f2c7c6 x86/pci: Add cap_resource()
Prepare for 32bit pci root bus

-v2: hpa said we should compare with (resource_size_t)~0
-v3: according to Linus to use MAX_RESOURCE instead.
     also need need to put related patches together
-v4: according to Andrew, use min in cap_resource()

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-8-git-send-email-yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:47:17 -08:00
Yinghai Lu
97445c3b86 x86/pci: Use u64 instead of size_t in amd_bus.c
Prepare to enable it for 32bit.

-v2: remove not needed cast

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-7-git-send-email-yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:47:17 -08:00
Yinghai Lu
3e3da00c01 x86/pci: AMD one chain system to use pci read out res
Found MSI amd k8 based laptops is hiding [0x70000000, 0x80000000) RAM
from e820.

enable amd one chain even for all.

-v2: use bool for found, according to Andrew

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-6-git-send-email-yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:47:17 -08:00
Yinghai Lu
27811d8cab x86: Move range related operation to one file
We have almost the same code for mtrr cleanup and amd_bus checkup, and
this code  will also be used in replacing bootmem with early_res,
so try to move them together and reuse it from different parts.

Also rename update_range to subtract_range as that is what the
function is actually doing.

-v2: update comments as Christoph requested

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-4-git-send-email-yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:47:17 -08:00
Yinghai Lu
67f241f457 x86/pci: seperate x86_pci_rootbus_res_quirks from amd_bus.c
Those functions are used by intel_bus.c so seperate them to another file. and
make amd_bus a bit smaller.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24 15:25:59 -08:00
Yinghai Lu
99935a7a59 x86/PCI: read root resources from IOH on Intel
For intel systems with multi IOH, we should read peer root resources
directly from PCI config space, and don't trust _CRS.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 08:47:09 -08:00
Jesse Barnes
2547089ca2 x86/PCI: initialize PCI bus node numbers early
The current mp_bus_to_node array is initialized only by AMD specific
code, since AMD platforms have registers that can be used for
determining mode numbers.  On new Intel platforms it's necessary to
initialize this array as well though, otherwise all PCI node numbers
will be 0, when in fact they should be -1 (indicating that I/O isn't
tied to any particular node).

So move the mp_bus_to_node code into the common PCI code, and
initialize it early with a default value of -1.  This may be overridden
later by arch code (e.g. the AMD code).

With this change, PCI consistent memory and other node specific
allocations (e.g. skbuff allocs) should occur on the "current" node.
If, for performance reasons, applications want to be bound to specific
nodes, they should open their devices only after being pinned to the
CPU where they'll run, for maximum locality.

Acked-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Jesse Brandeburg <jesse.brandeburg@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:29:21 -07:00
Yinghai Lu
626fdfec15 x86/PCI: get root CRS before scanning children
This allows us to remove adjust_transparent_bridge_resources and give
x86_pci_root_bus_res_quirks a chance when _CRS is not used or not there.

Acked-by: Gary Hade <garyhade@us.ibm.com>
Tested-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-30 13:44:24 -07:00
Linus Torvalds
236e946b53 Revert "PCI: use ACPI _CRS data by default"
This reverts commit 9e9f46c44e.

Quoting from the commit message:

 "At this point, it seems to solve more problems than it causes, so let's
  try using it by default.  It's an easy revert if it ends up causing
  trouble."

And guess what? The _CRS code causes trouble.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24 16:23:03 -07:00
Jesse Barnes
9e9f46c44e PCI: use ACPI _CRS data by default
At this point, it seems to solve more problems than it causes, so let's try using it by default.  It's an easy revert if it ends up causing trouble.

Reviewed-by: Yinghai Lu <yhlu.kernel@gmail.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:17 -07:00
Yinghai Lu
b10ceb5530 x86/PCI: don't bother with root quirks if _CRS is used
It will be overwriten later if _CRS is used, so don't bother to set it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 15:06:29 -07:00
Yinghai Lu
0e94ecd098 x86/PCI: set_pci_bus_resources_arch_default cleanups
Rename set_pci_bus_resources_arch_default to x86_pci_root_bus_res_quirks, move
the weak version from common.c to i386.c, and before calling, make sure it's a
root bus.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 14:47:46 -07:00
Jaswinder Singh Rajput
824877111c x86, pci: move arch/x86/pci/pci.h to arch/x86/include/asm/pci_x86.h
Impact: cleanup

Now that arch/x86/pci/pci.h is used in a number of other places as well,
move the lowlevel x86 pci definitions into the architecture include files.
(not to be confused with the existing arch/x86/include/asm/pci.h file,
which provides public details about x86 PCI)

Tested on: X86_32_UP, X86_32_SMP and X86_64_SMP

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 18:17:36 +01:00
Robert Richter
ed21763e7b x86: cleanup in amd_cpu_notify()
small coding style fix.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-25 11:11:59 +02:00
Robert Richter
91ede005d7 x86: fix: make PCI ECS for AMD CPUs hotplug capable
Until now, PCI ECS setup was performed at boot time only and for cpus
that are enabled then. This patch fixes this and adds cpu hotplug.

Tests sequence (check if ECS bit is set when bringing cpu online again):

 # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' )   < /dev/cpu/1/msr
 00000008 00404010
 # ( perl -e 'sysseek(STDOUT, 0xC001001F, 0); print pack "l*", 8, 0x00400010' ) > /dev/cpu/1/msr
 # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' )   < /dev/cpu/1/msr
 00000008 00400010
 # echo 0 > /sys/devices/system/cpu/cpu1/online
 # echo 1 > /sys/devices/system/cpu/cpu1/online
 # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' )   < /dev/cpu/1/msr
 00000008 00404010

Reported-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-23 17:39:31 +02:00
Robert Richter
9b4e27b528 x86: fix: do not run code in amd_bus.c on non-AMD CPUs
Jan Beulich wrote:

> Even worse - this would even try to access the MSR on non-AMD CPUs
> (currently probably prevented just by the fact that only AMD ones use
> family values of 0x10 or higher).

This patch adds cpu vendor check to the postcore_initcalls.

Reported-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-23 17:39:30 +02:00
Ingo Molnar
b3c9816b9f generic-ipi: merge fix
fix merge fallout:

arch/x86/pci/amd_bus.c: In function ‘enable_pci_io_ecs':
arch/x86/pci/amd_bus.c:581: error: too many arguments to function ‘on_each_cpu'

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 22:03:56 +02:00
Robert Richter
d199a04827 x86/pci: merge: moving mp_bus_to_node.c to amd_bus.c
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09 11:44:40 +02:00
Robert Richter
42a4b427a8 x86/pci: mp_bus_to_node merge: moving code in amd_bus.c
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09 11:44:34 +02:00
Ingo Molnar
3de352bbd8 Merge branch 'x86/mpparse' into x86/devel
Conflicts:

	arch/x86/Kconfig
	arch/x86/kernel/io_apic_32.c
	arch/x86/kernel/setup_64.c
	arch/x86/mm/init_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 11:14:58 +02:00
Robert Richter
3a27dd1ce5 x86: Move PCI IO ECS code to x86/pci
"Form follows function". Code is now where it belongs to.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 07:47:39 +02:00
Robert Richter
24bfdca7b7 x86/pci: Renaming k8-bus_64.c to amd_bus.c
The name fits better since this is code not only for K8.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 07:47:38 +02:00