Smart_amp_speaker device has the playback stream and capture stream
associated to it. Hence add the dpcm_capture = 1 flag while dailink
creation.
This patches fixes:
ERR kernel [timestamp] SSP1-Codec: ASoC: no backend capture stream
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201109210958.84198-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's not clear why this driver has an additional call to
regmap_mark_dirty(), remove to align with others.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201111214318.150529-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck complains, use separate loop variable for sink and source ports
sound/soc/codecs/rt711-sdw.c:382:4: style: Variable 'i' is reassigned
a value before the old one has been used. [redundantAssignment]
i = 0;
^
sound/soc/codecs/rt711-sdw.c:371:4: note: i is assigned
i++;
^
sound/soc/codecs/rt711-sdw.c:382:4: note: i is overwritten
i = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Link: https://lore.kernel.org/r/20201111214318.150529-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pointer cast is not necessary, remove.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Link: https://lore.kernel.org/r/20201111214318.150529-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the normal path, we should not free the arizona,
we should return immediately. It will be free when
call remove operation.
Fixes: 31833ead95 ("ASoC: arizona: Move request of speaker IRQs into bus probe")
Reported-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111130923.220186-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. This series of patches
fixed it.
Zhang Qilong (3):
ASoC: wm8994: Fix PM disable depth imbalance on error
ASoC: wm8997: Fix PM disable depth imbalance on error
ASoC: wm8998: Fix PM disable depth imbalance on error
sound/soc/codecs/wm8994.c | 6 +++++-
sound/soc/codecs/wm8997.c | 9 +++++++--
sound/soc/codecs/wm8998.c | 4 +++-
3 files changed, 15 insertions(+), 4 deletions(-)
--
2.25.4
We can choose to drop away any length of data from the beginning according
to project needs. Some projects don't want to throw away any data, because
they want to use recorded data to do echo cancellation, so they have to
make sure that they are aligned with the reference data as much as
possible. Or there are other algorithms in the upper layer to eliminate
this noise. Or some projects want to eliminate this noise form the kernel
layer. However, the minimum recommended value is 50ms to skip pop noise.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/1605062722-8711-1-git-send-email-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Deferred probe is an expected return value for snd_soc_register_card().
Given that the driver deals with it properly, there's no need to output
a warning that may potentially confuse users.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20201111103245.152189-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
Fixes: 31833ead95 ("ASoC: arizona: Move request of speaker IRQs into bus probe")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111041326.1257558-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
Fixes: 57e265c8d7 ("ASoC: wm8994: Move runtime PM init to platform device init")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111041326.1257558-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series is a prepraration for using generic graph driver for Tegra210
audio. Tegra audio graph series will be sent in a separate series because
it has some dependency over other series for documentation work. This
series can focus on the generic ASoC driver updates. Below are the summary
of changes done.
* Support multiple instances of a component. For example there can be
multiple I2S devices which can use the same component driver.
* Support open platforms with empty Codec endpoint. Customers can plug
their own HW and can populate codec endpoint.
* In a component model there can be many components which can be
connected together. In such cases Identify no-pcm DPCM DAI links which
can be used in BE<->BE connections.
* Expose structures or helpers to be re-used by other similar graph
drivers.
The series is based on following references where DPCM usgae for Tegra
Audio and simple-card driver proposal were discussed.
* https://lkml.org/lkml/2020/4/30/519 (DPCM for Tegra)
* https://lkml.org/lkml/2020/6/27/4 (simple-card driver)
Changelog
=========
v4 -> v5
--------
* No changes in the core/audio-graph driver patches which are
part of the current series.
* Dropped Tegra audio patches and doc patches. This will be
sent separately once the doc depdendencies are resolved.
v3 -> v4
--------
* Added new patches to convert graph.txt and audio-graph-card.txt
to corresponding json-schema files. Later these references
are used in Tegra audio graph schema.
* AHUB component binding docs are updated to reflect the usage
of ports/port/endpoint
* More common stuff is moved into graph_parse_of() and this is
used by both generic and Tegra audio graph.
* DT binding for Tegra audio graph is updated to included "ports { }"
* As per the suggestion 'void *data' member is dropped from
'asoc_simple_priv' and instead container method is used to
maintain required custom data internal to Tegra audio graph.
v2 -> v3
--------
* Dropped new compatible addition in generic graph driver
after reviewing it with Morimoto-san. Instead added Tegra
audio graph driver and new compatibles are added in the same.
* Added new patches to expose new members for customization
in audio graph driver.
* Added new patch for Tegra audio graph driver and related
documentation.
* Minor change in below commit where mutex version of helper is used
"ASoC: audio-graph: Identify 'no_pcm' DAI links for DPCM"
* DT binding is updated to use the newly exposed compatibles
* No changes in other patches
v1 -> v2
--------
* Re-organized ports/endpoints description for ADMAIF and XBAR.
Updated DT patches accordingly.
* After above change, multiple Codec endpoint support is not
required and hence dropped for now. This will be considered
separately if at all required in future.
* Re-ordered patches in the series.
Sameer Pujar (7):
ASoC: soc-core: Fix component name_prefix parsing
ASoC: soc-pcm: Get all BEs along DAPM path
ASoC: audio-graph: Use of_node and DAI for DPCM DAI link names
ASoC: audio-graph: Identify 'no_pcm' DAI links for DPCM
ASoC: audio-graph: Support empty Codec endpoint
ASoC: audio-graph: Expose new members for asoc_simple_priv
ASoC: audio-graph: Expose helpers from audio graph
include/sound/graph_card.h | 16 ++++
include/sound/simple_card_utils.h | 3 +
include/sound/soc.h | 1 +
sound/soc/generic/audio-graph-card.c | 175 ++++++++++++++++++++++++-----------
sound/soc/soc-core.c | 3 +-
sound/soc/soc-pcm.c | 3 +-
6 files changed, 143 insertions(+), 58 deletions(-)
create mode 100644 include/sound/graph_card.h
--
2.7.4
There are two issues in this function.
1) We can't drop the refrences on "cpu", "codec" and "platform" before
we take the reference. This doesn't cause a problem on the first
iteration because those pointers start as NULL so the of_node_put()
is a no-op. But on the subsequent iterations, it will lead to a use
after free.
2) If the devm_kzalloc() allocation failed then the code returned
directly instead of cleaning up.
Fixes: c1e6414cdc ("ASoC: qcom: common: Fix refcount imbalance on error")
Fixes: 1e36ea360a ("ASoC: qcom: common: use modern dai_link style")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201105125154.GA176426@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
The break condition copied by mistake as same
as loop condition in the previous version, but must
be the opposite. So fix it.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/20201102161810.902464-1-viorel.suman@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit exposes following functions which can be used by a sound
card driver based on generic audio graph driver. Idea is vendors can
have a thin driver and re-use common stuff from audio graph driver.
- graph_card_probe()
- graph_parse_of()
In doing so a new header file is added for above. The graph_probe()
function is simplified by moving more common stuff to graph_parse_of().
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-8-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new members in struct 'asoc_simple_priv'. Idea is to leverage
simple or graph card driver as much as possible and vendor can
maintain a thin driver to control the behavior by populating these
newly exposed members.
Following are the members added in 'asoc_simple_priv':
- 'ops' struct: In some cases SoC vendor drivers may want to
implement 'snd_soc_ops' callbacks differently. In such cases
custom callbacks would be used.
- 'force_dpcm' flag: Right now simple or graph card drivers
detect DAI links as DPCM links if:
* The dpcm_selectable is set AND
* Codec is connected to multiple CPU endpoints or aconvert
property is used for rate/channels.
So there is no way to directly specify usage of DPCM alone. So a
flag is exposed to mark all links as DPCM. Vendor driver can
set this if required.
- 'dpcm_selectable': Currently simple or audio graph drivers
provide a way to enable this for specific compatibles. However
vendor driver may want to define some additional info. Thus
expose this variable where vendor drivers can set this if
required.
Audio graph driver is updated to consider above flags or callbacks.
Subsequent patches in the series illustrate usage for above.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-7-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For open platforms, which can support pluggable audio cards, Codec
endpoint is not fixed always. It actually depends on the compatible
HW module that is going to be connected. From SoC side the given I/O
interface is always available. Hence such links have fixed CPU endpoint
but no Codec endpoint. This patch helps to support such links where
user can populate Codec endpoint only and its fields in Platform DT
depending on the plugged HW.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-6-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM devices are created for FE dai links with 'no-pcm' flag as '0'.
Such DAI links have CPU component which implement either pcm_construct()
or pcm_new() at component or dai level respectively. Based on this,
current patch exposes a helper function to identify such components
and populate 'no_pcm' flag for DPCM DAI link.
This helps to have BE<->BE component links where PCM devices need
not be created for CPU component involved in such links.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-5-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For multiple instances of components, using DAI name alone for DAI links
is causing conflicts. Components can define multiple DAIs and hence using
just a device name won't help either. Thus DT device node reference and
DAI names are used to uniquely represent DAI link names.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_end_walk_at_be() stops the graph walk when first BE is found for
the given FE component. In a component model we may want to connect
multiple DAIs from different components. A new flag is introduced in
'snd_soc_card', which when set allows DAI/component chaining. Later
PCM operations can be called for all these listed components for a
valid DAPM path.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1604329814-24779-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "prefix" can be defined in DAI link node or it can be specified as
part of the component node itself. Currently "sound-name-prefix" defined
in a component is not taking effect. Actually the property is not getting
parsed. It can be fixed by parsing "sound-name-prefix" property whenever
"prefix" is missing in DAI link Codec node.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1604329814-24779-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Note:
- The patch is made by the collaboration of
Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Cheng-Yi Chiang <cychiang@chromium.org>
v6:
- Documentation: Addressed suggestions from Rob Herring.
- Define "maxItems: 1" in dmic-gpios property.
- Only keep one example and add dmic-gpios property in.
v5:
- Machine driver:
- Fix a format string warning (Reported-by: kernel test robot <lkp@intel.com>).
detailed info at https://lore.kernel.org/patchwork/patch/1331087/
v4:
- Machine driver: Addressed suggestions from Tzung-Bi.
- Remove redundant judgments in dmic_set() and dmic_get().
- Remove 1 level indent of judgment of IS_ERR(data->dmic_sel).
v3:
- Machine driver: Addressed suggestions from Tzung-Bi.
- Move variables "dmic_switch" and "dmic_sel" into struct sc7180_snd_data.
- Remove redundant judgments in dmic_set().
v2:
- Documentation: Modify the dimc-gpios property description and examples.
- Machine driver:
- Remove "qcom,sc7180-sndcard-rt5682-m98357-2mic" compatible
- See gpio property and use anadditional control.
Thanks for the review!
Ajye Huang (2):
ASoC: google: dt-bindings: modify machine bindings for two MICs case
ASoC: qcom: sc7180: Modify machine driver for 2mic
.../bindings/sound/google,sc7180-trogdor.yaml | 8 ++-
sound/soc/qcom/sc7180.c | 61 +++++++++++++++++++
2 files changed, 68 insertions(+), 1 deletion(-)
--
2.25.1
"Shane.Chien" <shane.chien@mediatek.com>:
From: "Shane.Chien" <shane.chien@mediatek.com>
This series of patches is to fix vaud18 power leakage problem.
vaud18 will be enable only when mt6359 audio path is turned on.
Change since v2:
- fix dt-binnding syntex error
Change since v1:
- use dapm regulator supply widget for vaud18 control.
- add vaud18 regulator property in mt6359 dt-binding.
Shane.Chien (2):
ASoC: Fix vaud18 power leakage of mt6359
dt-bindings: mediatek: mt6359: Add new property for mt6359
.../devicetree/bindings/sound/mt6359.yaml | 9 +++++++
sound/soc/codecs/mt6359.c | 25 +-------------------
sound/soc/codecs/mt6359.h | 8 -------
3 files changed, 10 insertions(+), 32 deletions(-)
--
1.7.9.5
Hi Mark
These are v2 of tidyup patch-set for SNDRV_PCM_STREAM_xxx and SND_COMPRESS_xxx.
soc-compress is using both SNDRV_PCM_STREAM_xxx and SND_COMPRESS_xxx, but mixed use.
This is confusable, but no problem. Because these are defined as UAPI and
are using same value.
This patch-set make sure these are same value.
v1 -> v2
- checks COMPRESS vs PCM_STREAM by using BUILD_BUG_ON()
Link: https://lore.kernel.org/r/87wnzcfnkk.wl-kuninori.morimoto.gx@renesas.com
Kuninori Morimoto (2):
ASoC: soc-compress: tidyup STREAM vs COMPRESS
ASoC: soc-compress: assume SNDRV_PCM_STREAM_xxx and SND_COMPRESS_xxx are same
sound/soc/soc-compress.c | 63 +++++++++++++++-------------------------
1 file changed, 23 insertions(+), 40 deletions(-)
--
2.25.1
Add codec driver for Nuvoton NAU8315.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201102023212.594137-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-compress.c is using both SND_COMPRESS_xxx and SND_PCM_STREAM_xxx.
These are defined as UAPI, and has same value.
enum {
SNDRV_PCM_STREAM_PLAYBACK = 0,
SNDRV_PCM_STREAM_CAPTURE,
...
};
enum snd_compr_direction {
SND_COMPRESS_PLAYBACK = 0,
SND_COMPRESS_CAPTURE
};
Essentially both COMPRESS and PCM_STREAM definitions are identical,
and can be never different because of ABI compatibility,
which means it's safe to mix both variants in the code.
This patch checks it by BUILD_BUG_ON(), and merge to use.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87361wmsyg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_runtime_activate() and
snd_soc_dai_digital_mute() need SNDRV_PCM_STREAM_xxx
instead of SND_COMPRESS_xxx.
These are bug but nothing happen because these are same value.
enum {
SNDRV_PCM_STREAM_PLAYBACK = 0,
SNDRV_PCM_STREAM_CAPTURE,
...
};
enum snd_compr_direction {
SND_COMPRESS_PLAYBACK = 0,
SND_COMPRESS_CAPTURE
};
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kmcmsyn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In addition, having mixer control to switch between DMICs by
using "dmic-gpios" property.
Refer to this one as an example,
commit b7a742cff3 ("ASoC: AMD: Use mixer control to switch between DMICs")
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201106061433.1483129-3-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
vaud18 is power of mt6359 audio path. It
should only enable when audio is used,
instead of in boot up stage.
Once mt6359 audio path is enabled or disabled,
vaud18 is controlled by regulator supply widget
"LDO_VAUD18". Due to vaud18 is controlled by
regulator dapm macro instead of regmap, the macro
MT6359_LDO_VAUD18_CON0 and variable avdd_reg
is no used and removed from mt6359.h.
Signed-off-by: Shane.Chien <shane.chien@mediatek.com>
Link: https://lore.kernel.org/r/1604975492-6142-2-git-send-email-shane.chien@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
The series is inspired by the effort to standardize TI's arm64 dtsi files to keep
all nodes in 'okay' state and let the board dts files disable not needed
peripherals (and not properly configured):
https://lore.kernel.org/lkml/20201104224356.18040-1-nm@ti.com/
In the unlikely (or likely?) event when the dts misses to disable the McASP node
which is not configured we currenly and luckily just manage to not crash as we
had fixup code in place for legacy pdata boots.
This however prints out a message which does not really help to identify the
issue.
This series will reduce some of the noise during boot (first patch) then
adds the needed changes to handle the variations of 'okay':
A - have all required DT properties for audio
B - gpiochip is enabled
A && !B -> everything is OK for audio, no gpiochip registered
A && B -> everything is OK for audio, gpiochip is registered
!A && B -> audio is not OK, gpiochip is registered. dev_dbg() for audio and do
not register SOC DAI and PCM
!A && !B -> audio is not OK, no gpiochip. dev_err() and fail the probe
Regards,
Peter
---
Peter Ujfalusi (4):
ASoC: ti: davinci-mcasp: Use platform_get_irq_byname_optional
ASoC: ti: davinci-mcasp: Remove legacy dma_request parsing
ASoC: ti: davinci-mcasp: Simplify the configuration parameter handling
ASoC: ti: davinci-mcasp: Handle missing required DT properties
sound/soc/ti/davinci-mcasp.c | 294 ++++++++++++++---------------------
1 file changed, 119 insertions(+), 175 deletions(-)
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
platform_get_irq() would print error message internally, so dev_err()
after platform_get_irq() is not needed
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1604715643-29507-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McASP needs three required properties to be usable for audio:
op-mode, tdm-slots and the serial-dir array.
Instead of probing the driver even without the needed information we should
make sure that all the parameters are provided for operation.
The fact that McASP can act as a GPIO controller for it's pins complicates
this a bit, but as a general rule we can:
- we fail the probe if McASP is not configured to be used as gpiochip
- we will not register the DAI (and PCM) if gpiochip is defined
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201106072551.689-5-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the davinci_mcasp_set_pdata_from_of() function which returned a
pdata pointer with davinci_mcasp_get_config() to return an actual error
code and handle all pdata validation and private mcasp struct setup in
there.
Drop the unused ram-size-playback and sram-size-capture query from DT at
the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201106072551.689-4-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The legacy dma_request (which was holding the DMA request number) is no
longer in use for a long time.
All legacy platforms has been converted to dma_slave_map.
Remove it along with the DT parsing to get tx_dma_channel and
rx_dma_channel.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201106072551.689-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on the integration of McASP either the 'common' or the
'rx' and 'tx' or only the 'tx' interrupt number is valid, provided.
By switching to platform_get_irq_byname_optional() we can clean up the
bootlog from messages like:
davinci-mcasp 2ba0000.mcasp: IRQ common not found
The irq number == 0 is not valid, fix the check at the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201106072551.689-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add delay to fix pop noise from speaker.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201105030804.31115-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A batch of driver specific fixes that have come up since the merge
window, nothing particularly major here but all good to have.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+kBYgACgkQJNaLcl1U
h9BDHQf9HDn/narvcVdfCBdWI0uI/P5sETaQUw69J1PquiCtn8P2MzyaIofTGJbX
IiWEQE+Z1FnUgcs/KAQwKuvlp5UQ+L/6VlTPATgxEOcnNb82rN1riJjHI4C+5UXj
+KShaJy0afLcva3HL1NOuzUPvj1TZ+j07JiW7uqhEd3H/+O3VlXvUFWlZeXcDiNn
5hd+r4fKybfYrydR/kpE2JBW7E+0JhcOgztBhw/p3K0js+ovaDolSDVgonwcOtPE
/yDhISEkSzQ7wWYc4FjROryQJ5e4HtLEc9RumiqHVDXVg51uT3z8U/aEttlXVKR9
lEGZw+xNlnqDi/LDqYvJn1CER6iklw==
=Pe6G
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.10-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.10
A batch of driver specific fixes that have come up since the merge
window, nothing particularly major here but all good to have.
The AUD2HTX is a digital module that provides a bridge between
the Audio Subsystem and the HDMI RTX Subsystem. This module
includes intermediate storage to queue SDMA transactions prior
to being synchronized and passed to the HDMI RTX Subsystem over
the Audio Link.
The AUD2HTX contains a DMA request routed to the SDMA module.
This DMA request is controlled based on the watermark level in
the 32-entry sample buffer.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1604281947-26874-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ecause clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20201029090104.29552-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Because clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20201029084137.28771-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes below warning when module is compiled with W=1 C=1
sound/soc/qcom/qdsp6/q6afe-clocks.c:122:18: warning: symbol 'q6afe_clks'
was not declared. Should it be static?
Fixes: 520a1c396d ("ASoC: q6afe-clocks: add q6afe clock controller")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201105114435.22860-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm's dpcm_fe_dai_do_trigger() supported DRAIN commnad up to kernel
v5.4 where explicit switch(cmd) has been introduced which takes into
account all SNDRV_PCM_TRIGGER_xxx but SNDRV_PCM_TRIGGER_DRAIN. Update
switch statement to reactive support for it.
As DRAIN is somewhat unique by lacking negative/stop counterpart, bring
behaviour of dpcm_fe_dai_do_trigger() for said command back to its
pre-v5.4 state by adding it to START/RESUME/PAUSE_RELEASE group.
Fixes: acbf27746e ("ASoC: pcm: update FE/BE trigger order based on the command")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201026100129.8216-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following sparse warnings:
./mt8192-dai-i2s.c:2040:5: warning: symbol 'mt8192_dai_i2s_get_share' was not declared. Should it be static?
./mt8192-dai-i2s.c:2060:5: warning: symbol 'mt8192_dai_i2s_set_priv' was not declared. Should it be static?
./mt8192-afe-gpio.c:15:16: warning: symbol 'aud_pinctrl' was not declared. Should it be static?
./mt8192-afe-pcm.c:70:5: warning: symbol 'mt8192_get_memif_pbuf_size' was not declared. Should it be static?
./mt8192-afe-pcm.c:2137:39: warning: symbol 'mt8192_afe_component' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Acked-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/1604579287-25251-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A build of arm64 allmodconfig with next-20201105 fails with the error:
ERROR: modpost: "mt8192_afe_gpio_request" undefined!
ERROR: modpost: "mt8192_afe_gpio_init" undefined!
Export the symbols so that mt8192-mt6359-rt1015-rt5682.ko finds it.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20201105124747.18383-1-sudipm.mukherjee@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes below warning when module is compiled with W=1 C=1
lpass-cpu.c:677:22: warning: symbol 'lpass_hdmi_regmap_config'
was not declared. Should it be static?
Fixes: 7cb37b7bd0 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201105114100.18647-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes audio distortion on playback for the Allen&Heath
Qu-16.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201104115717.GA19046@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Almost all other allocations in ASoC API are resource managed, the only
exception is soc-topology.c.
This patchset clean ups few unnecessary functions in preparation for
change and then changes to devm_ functions for allocation.
Amadeusz Sławiński (6):
ASoC: topology: Remove unused functions from topology API
ASoC: topology: Remove multistep topology loading
ASoC: topology: Unify all device references
ASoC: topology: Change allocations to resource managed
ASoC: topology: Remove empty functions
ASoC: topology: Simplify remove_widget function
include/sound/soc-topology.h | 13 +-
sound/soc/intel/skylake/skl-topology.c | 9 +-
sound/soc/soc-topology.c | 302 +++++--------------------
sound/soc/sof/pcm.c | 2 +-
sound/soc/sof/topology.c | 4 +-
5 files changed, 57 insertions(+), 273 deletions(-)
--
2.25.1
Add TDM slot callback function to support TDM configuration
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201104092005.2227-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that enum and mixer kcontrols are freed by resource management
framework, removing kcontrol becomes one function call, so simplify code
in remove_widget.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After changing memory management to resource managed one, some of the
functions became no ops, remove them as they are no longer needed.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order for topology to be resource managed, change all allocations to
be resource managed:
k*alloc -> devm_k*alloc
kstrdup -> devm_kstrdup
Exceptions where non resource managed allocation is left is
soc_tplg_dapm_widget_create(), as it uses pointer to memory locally and
frees it up after use, as well as soc_tplg_dapm_graph_elems_load(),
which has temporary pointer to table of routes.
After conversion all redundant calls in error and clean up paths were
removed.
Also removed some variables which become unneeded when there is no calls
using them.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In few places tplg->comp->dev is used, while everywhere else tplg->dev
is being used. Unify those uses towards tplg->dev, as it is being set to
comp->dev during initialization anyway.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In theory topology can be loaded in multiple steps by providing index to
snd_soc_tplg_component_load, however, from usability point of view it
doesn't make sense, as can be seen from all current users loading
topology in one go. Remove the unnecessary parameter.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Topology API exposes snd_soc_tplg_widget_remove and
snd_soc_tplg_widget_remove_all, but both are nowhere used. All current
users load and unload topology as a whole. As following commits
introduce resource managed memory, remove them to simplify code and
reduce maintenance burden.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Validity bits (bit 28) must not be set in order to have the samples
valid. Some controllers look for this bit and ignore the samples if it
is set.
Fixes: 06ca24e98e ("ASoC: mchp-spdiftx: add driver for S/PDIF TX Controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201104155738.68403-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes audio distortion on playback for the Yamaha MODX.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Tested-by: Frank Slotta <frank.slotta@posteo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201104120705.GA19126@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Khadas audio devices ( USB_ID_VENDOR 0x3353 )
have DSD-capable implementations from XMOS
need add new usb vendor id for recognition
Signed-off-by: Artem Lapkin <art@khadas.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201103103311.5435-1-art@khadas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS TM420 had depop circuit for headphone.
It need to turn on by COEF bit.
[ fixed the missing enum definition by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3d6177d7023b4783bf2793861c577ada@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This code is correct, but it should be indented one more tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201103101853.GD1127762@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
davinci_mcasp_get_dt_params alway return zero, and its return value
could be ignored by the caller. So make it 'void' type to avoid the
check its return value.
Fixes: 764958f2b5 ("ASoC: ti: davinci-mcasp: Support for auxclk-fs-ratio")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201102103428.32678-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Besides the fact that muxclk is optional, muxclk can be set using
assigned-clocks, removing the need to set it in driver. The warning is
thus unneeded, so we can transform it in a debug print, eventually to just
reflect that muxclk was not set by the driver.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201103100554.1307190-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is harmless, but the "addr" comes from the user and it could lead
to a negative shift or to shift wrapping if it's too high.
Fixes: 0b00a5615d ("ALSA: hdac_ext: add hdac extended controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201103101807.GC1127762@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201101171943.2305030-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201029082513.28233-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
First patch adds tdm 4-slot 100fs DAI setting to avoid jitter of using
64fs on CML boards. Second patch is a DMI quirk for HP Dooly.
Changes since v1:
-Add comment on Dooly's DMI quirk
Brent Lu (2):
ASoC: intel: sof_rt5682: Add support for cml_rt1015_rt5682
ASoC: intel: sof_rt5682: Add quirk for Dooly
sound/soc/intel/boards/sof_rt5682.c | 65 +++++++++++++++++--
.../intel/common/soc-acpi-intel-cml-match.c | 13 ++++
2 files changed, 73 insertions(+), 5 deletions(-)
--
2.17.1
This DMI product family string of this board is "Google_Hatch" so the
DMI quirk will take place. However, this board is using rt1015 speaker
amp instead of max98357a specified in the quirk. Therefore, we need an
new DMI quirk for this board.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201030170559.20370-3-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the driver data and updates quirk info for cml with
rt1015 speaker amp and rt5682 headset codec. Due to different mclk
frequency on JSL and CML, we need to use 4 slot TDM 100fs to avoid
the SSP m/n counter.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201030170559.20370-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Checkpatch script produces warning:
WARNING: function definition argument 'const struct sun4i_i2s *'
should also have an identifier name.
Let's fix this by adding identifier name to get_bclk_parent_rate()
and set_fmt() callback definition.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-10-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because SUN4I_I2S_FIFO_CTRL_REG is volatile, writes done while the
regmap is cache-only are ignored. To work around this, move the
configuration to a callback that runs while the ASoC core has a
runtime PM reference to the device.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-9-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FIFO TX reg is volatile and sun8i i2s register
mapping is different from sun4i.
Even if in this case it's doesn't create an issue,
Avoid setting some regs that are undefined in sun8i.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-8-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the functionality of the driver to include support of 20 and
24 bits per sample.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-7-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the newer SoCs such as the H3 and A64 this is set by default
to transfer a 0 after each sample in each slot. However the A10
and A20 SoCs that this driver was developed on had a default
setting where it padded the audio gain with zeros.
This isn't a problem while we have only support for 16bit audio
but with larger sample resolution rates in the pipeline then SEXT
bits should be cleared so that they also pad at the LSB. Without
this the audio gets distorted.
Set sign extend sample for all the sunxi generations even if they
are not affected. This will keep consistency and avoid relying on
default.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-6-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are actually using a complex formula to just return a bunch of
simple values. Also this formula is wrong for sun4i when calling
get_wss() the function return 4 instead of 3.
Replace this with a simpler switch case.
Also drop the i2s params which is unused and return a simple int as
returning an error code could be out of range for an s8 and there is
no optim to return a s8 here.
Fixes: 619c15f7fa ("ASoC: sun4i-i2s: Change SR and WSS computation")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-5-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
H6 I2S is very similar to that in H3, except it supports up to 16
channels.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-4-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As slots and slot_width can be set manually using set_tdm().
These values are then kept in sun4i_i2s struct.
So we need to check if these values are set or not.
This is not done actually and will trigger a bug.
For example, if we set to the simple soundcard in the device-tree
dai-tdm-slot-width = <32> and then start a stream using S16_LE,
currently we would calculate BCLK for 32-bit slots, but program
lrck_period for 16-bit slots, making the sample rate double what we
expected.
To fix this, we need to check if these values are set or not but as
this logic is already done by the caller. Avoid duplicating this
logic and just pass the required values as params to set_chan_cfg().
Suggested-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-3-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Left and Right justified mode are computed using the same formula
as DSP_A and DSP_B mode.
Which is wrong and the user manual explicitly says:
LRCK_PERDIOD:
PCM Mode: Number of BCLKs within (Left + Right) channel width.
I2S/Left-Justified/Right-Justified Mode: Number of BCLKs within each
individual channel width(Left or Right)
Fix this by using the same formula as the I2S mode.
Fixes: 7ae7834ec4 ("ASoC: sun4i-i2s: Add support for DSP formats")
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201030144648.397824-2-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update compatible string as board compatible and device compatible
should not be same!. Make the driver inline with the new bindings.
Fixes: aa2e278554 ("ASoC: qcom: sm8250: add sound card qrb5165-rb5 support")
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201029101550.31695-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable MI2S bit clock from PAUSE/STOP/SUSPEND usecase instead of
shutdown time. Acheive this by invoking clk_disable API from
cpu daiops trigger instead of cpu daiops shutdown.
Change non-atomic API "clk_prepare_enable" to atomic API
"clk_enable" in trigger, as trigger is being called from atomic context.
Fixes: 7e6799d8f8 ("ASoC: qcom: lpass-cpu: Enable MI2S BCLK and LRCLK together")
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1603098363-9251-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update SC7180 lpass_variant structure with proper I2S bitwidth
field bit positions, as bitwidth denotes 0 to 1 bits,
but previously used only 0 bit.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1603798474-4897-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The check for an error return from the call to snd_pcm_format_width
is never true as the unsigned int bitwidth can never be less than
zero. Fix this by making bitwidth an int.
Fixes: 7cb37b7bd0 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201028115112.109017-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
digital gain range is -84dB min to 40dB max, however this was not
correctly specified in the range.
Fix this by with correct range!
Fixes: 8c4f021d80 ("ASoC: wcd9335: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201028154340.17090-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Static analysis Coverity had detected a potential array out-of-bounds
write issue due to the fact that MAX AFE port Id was set to 16 instead
of using AFE_PORT_MAX macro.
Fix this by properly using AFE_PORT_MAX macro.
Fixes: aa2e278554 ("ASoC: qcom: sm8250: add sound card qrb5165-rb5 support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201028142001.22431-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
digital gain range is -84dB min to 40dB max, however this was not
correctly specified in the range.
Fix this by with correct range!
Fixes: 1cde8b8223 ("ASoC: wcd934x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201028154340.17090-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The broken jack detection should be fixed by commit a6e7d0a4bd ("ALSA:
hda: fix jack detection with Realtek codecs when in D3"), let's try
enabling runtime PM by default again.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20201027130038.16463-4-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both pm_runtime_force_suspend() and pm_runtime_force_resume() have
some implicit checks, so it can make code flow more straightforward if
we separate runtime and system suspend callbacks.
High Definition Audio Specification, 4.5.9.3 Codec Wake From System S3
states that codec can wake the system up from S3 if WAKEEN is toggled.
Since HDA controller has different wakeup settings for runtime and
system susend, we also need to explicitly disable direct-complete which
can be enabled automatically by PCI core. In addition to that, avoid
waking up codec if runtime resume is for system suspend, to not break
direct-complete for codecs.
While at it, also remove AZX_DCAPS_SUSPEND_SPURIOUS_WAKEUP, as the
original bug commit a6630529ae ("ALSA: hda: Workaround for spurious
wakeups on some Intel platforms") solves doesn't happen with this
patch.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20201027130038.16463-3-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Upon system resume, hda_codec_pm_resume() uses hda_codec_force_resume()
to resume the codec. However, pm_runtime_force_resume() won't really
resume the codec because of pm_runtime_need_not_resume() check.
Hence, hda_codec_force_resume() schedules a jackpoll work, which is to
really power up the codec.
Instead of doing that, we can use direct-complete to make the PM flow
more straightforward, and keep codec always suspended through system PM
flow if conditions are met.
On system suspend, PM core will decide what to do based on
hda_codec_pm_prepare():
- If codec is not runtime-suspended, PM core will suspend and resume the
device as normal.
- If codec is runtime-suspended, PM core will try to keep it suspended.
If it's still suspended after system resume, we use
hda_codec_pm_complete() to resume codec if it's needed.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20201027130038.16463-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
System boot with plugged headset. It will not detect headset Mic.
It will happen on cold boot restart resume state.
Quirk by SSID change to quirk by pin verb.
Fixes: 13468bfa8c ("ALSA: hda/realtek - set mic to auto detect on a HP AIO machine")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/f42ae1ede1cf47029ae2bef1a42caf03@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Note:
- The machine driver patch is made by the collaboration of
Cheng-Yi Chiang <cychiang@chromium.org>
Rohit kumar <rohitkr@codeaurora.org>
Ajit Pandey <ajitp@codeaurora.org>
But Ajit has left codeaurora.
Changes from v1 to v2:
- Ducumentation: Addressed all suggestions from Doug.
- Machine driver:
- Fix comment style for license.
- Sort includes.
- Remove sc7180_snd_hw_params.
- Remove sc7180_dai_init and use aux device instead for headset jack registration.
- Statically define format for Primary MI2S.
- Atomic is not a concern because there is mutex in card to make sure
startup and shutdown happen sequentially.
- Fix missing return -EINVAL in startup.
- Use static sound card.
- Use devm_kzalloc to avoid kfree.
Changes from v2 to v3:
- Ducumentation: Addressed suggestions from Srini.
- Machine driver:
- Reuse qcom_snd_parse_of to parse properties.
- Remove playback-only and capture-only.
- Misc fixes to address comments.
Changes from v3 to v4:
- Ducumentation: Addressed suggestions from Rob.
- Remove definition of dai.
- Use 'sound-dai: true' for sound-dai schema.
- Add reg property to pass 'make dt_binding_check' check although reg is not used in the driver.
- Machine driver:
- Add Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Changes from v4 to v5:
- Documentation: Addressed suggestions from Rob.
- Add definition for "#address-cells" and "#size-cells".
- Add additionalProperties: false
- Add required properties.
Changes from v5 to v6:
- Documentation: Addressed suggestions from Rob.
- Drop contains in compatible strings.
- Only allow dai-link@[0-9]
- Remove reg ref since it has a type definition already.
Changes from v6 to v7
- Documentation:
- Add headset-jack and hdmi-jack to specify the codec
responsible for jack detection.
- HDMI codec driver:
- Use component set_jack ops instead of exporting hdmi_codec_set_jack_detect.
- Machine driver:
- Removed aux device following Stephan's suggestion.
- Use headset-jack and hdmi-jack to specify the codec
responsible for jack detection.
- Add support for HDMI(actually DP) playback.
Changes from v7 to v8
- Documentation:
- Remove headset-jack and hdmi-jack.
- Machine driver:
- Let machine driver decide whether there is a jack on the DAI.
Changes from v8 to v9
- hdmi-codec driver:
- Fixed the naming.
- Machine driver:
- Fixed unused fields.
- Moved snd_soc_card_set_drvdata
- Keep the naming of HDMI as dai name until v5 of lpass-hdmi patches.
Changes from v9 to v10
- Documentation:
- Let compatible string be more specific for board configuration to allow
for future changes.
- Machine driver:
- Fixed unused include and macro.
- Add temporary macro SC7180_LPASS_DP for future change in sc7180-lpass.h.
- Let sound card be dynamically allocated.
- Change compatible string accordingly.
Changes from v10 to v11
- Machine driver:
- Use temporary macro LPASS_DP_RX for future change in sc7180-lpass.h.
Changes from v11 to v12
- Documentation:
- Change the file and title name for new compatible string google,sc7180-trogdor.
- Change the example of model name.
- Machine driver:
- Use the definitaion of index LPASS_DP_RX in sc7180-lpass.h.
- Fix for compatible string.
- Replace a comma with semicolon.
Ajit Pandey (1):
ASoC: qcom: sc7180: Add machine driver for sound card registration
Cheng-Yi Chiang (1):
ASoC: google: dt-bindings: Add sc7180-trogdor machine bindings
.../bindings/sound/google,sc7180-trogdor.yaml | 130 +++++++++
sound/soc/qcom/Kconfig | 12 +
sound/soc/qcom/Makefile | 2 +
sound/soc/qcom/sc7180.c | 266 ++++++++++++++++++
4 files changed, 410 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
create mode 100644 sound/soc/qcom/sc7180.c
--
2.29.0.rc2.309.g374f81d7ae-goog
Add new driver to register sound card on sc7180 trogdor board and
do the required configuration for lpass cpu dai and external codecs
connected over MI2S interfaces.
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201027032234.1705835-3-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Zoom UAC-2 USB audio interface provides an async playback endpoint
("1 OUT (ASYNC)") and capture endpoint ("2 IN (ASYNC)"), both with
2-channel S32_LE in 44.1, 48, 88.2, 96, 176.4, or 192
kilosamples/s. The device provides explicit feedback to adjust the
host's playback rate, but the feedback appears unstable and biased
relative to the device's capture rate.
"alsaloop -t 1000" experiences playback underruns and tries to
resample the captured audio to match the varying playback
rate. Forcing the kernel to use implicit feedback appears to
produce more stable results. This causes the host to transmit one
playback sample for each capture sample received. (Zoom North America
has been notified of this change.)
Signed-off-by: Keith Winstein <keithw@cs.stanford.edu>
Tested-by: Keith Winstein <keithw@cs.stanford.edu>
Cc: <stable@vger.kernel.org>
BugLink: https://lore.kernel.org/r/20201027071841.GA164525@trolley.csail.mit.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi Mark
soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().
static int soc_pcm_hw_params(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return ret;
^ component_err:
| ...
| interface_err:
(A) ...
| codec_err:
| ...
v return ret;
}
This kind of duplicated code can be a hotbed of bugs,
thus, this patch-set share soc_pcm_hw_free() and rollback.
Kuninori Morimoto (6):
ASoC: soc.h: remove for_each_rtd_dais_rollback()
ASoC: soc-pcm: move soc_pcm_hw_free() next to soc_pcm_hw_params()
ASoC: soc-link: add mark for snd_soc_link_hw_params/free()
ASoC: soc-component: add mark for snd_soc_pcm_component_hw_params/free()
ASoC: soc-dai: add mark for snd_soc_dai_hw_params/free()
ASoC: soc-pcm: add soc_pcm_hw_clean() and call it from soc_pcm_hw_params/free()
include/sound/soc-component.h | 6 +-
include/sound/soc-dai.h | 4 +-
include/sound/soc-link.h | 3 +-
include/sound/soc.h | 7 +-
sound/soc/soc-component.c | 19 ++---
sound/soc/soc-dai.c | 13 +++-
sound/soc/soc-dapm.c | 4 +-
sound/soc/soc-link.c | 12 +++-
sound/soc/soc-pcm.c | 131 ++++++++++++++--------------------
9 files changed, 97 insertions(+), 102 deletions(-)
--
2.25.1
This series adds support the other two AIFs present in the sun8i codec,
which can be used for codec2codec DAI links.
This series first fills out the DAI driver, removing assumptions that
were made for AIF1 (16 bits, 2 channels, certain clock inversions). Some
new logic is required to handle 3 DAIs and the ADC/DAC sharing the same
clock. Finally, it adds the new DAIs, and hooks them up with DAPM
widgets and routes per the hardware topology.
To minimize the number of patches in this series, related device tree
patches (increasing #sound-dai-cells, adding new DAI links) will be sent
separately.
Changes from v1:
- Patches 1-8 from v1 (DAPM changes) were merged
- Prefixed AIF constants with "SUN8I_CODEC_" [1, 7, 10, 16, 17]
- Renamed variables in sun8i_codec_set_fmt for clarity [3]
- Update sysclk->sysclk_rate if later calls to hw_params change the
sample rate (thanks Chen-Yu for reminding me of this) [11]
- Select COMMON_CLK for clk_set_rate_exclusive [12]
- Add comments and hopefully clarify the clock protection logic [12]
- Make the error message more concise and put it on one line [12]
- Drop the "reg" variable holding SUN8I_AIF_CLK_CTRL(dai->id) [15]
- Rename "div_reg" to "clk_reg" and adjust comments for clarity [17]
- Improve the AIF2/AIF3 rate mismatch error message [17]
- Minor grammar/wording fixes in commit messages [2, 4, 7, 8, 16, 17]
- Added Maxime's Acked-by: [1-2, 4-9, 11, 13-14, 16]
Samuel Holland (17):
ASoC: sun8i-codec: Prepare to extend the DAI driver
ASoC: sun8i-codec: Program DAI format before clock inversion
ASoC: sun8i-codec: Enable all supported clock inversions
ASoC: sun8i-codec: Use the provided word size
ASoC: sun8i-codec: Round up the LRCK divisor
ASoC: sun8i-codec: Correct the BCLK divisor calculation
ASoC: sun8i-codec: Support the TDM slot binding
ASoC: sun8i-codec: Enforce symmetric DAI parameters
ASoC: sun8i-codec: Enable all supported sample rates
ASoC: sun8i-codec: Automatically set the system sample rate
ASoC: sun8i-codec: Constrain to compatible sample rates
ASoC: sun8i-codec: Protect the clock rate while streams are open
ASoC: sun8i-codec: Require an exact BCLK divisor match
ASoC: sun8i-codec: Enable all supported PCM formats
ASoC: sun8i-codec: Generalize AIF clock control
ASoC: sun8i-codec: Add the AIF2 DAI, widgets, and routes
ASoC: sun8i-codec: Add the AIF3 DAI, widgets, and routes
sound/soc/sunxi/Kconfig | 1 +
sound/soc/sunxi/sun8i-codec.c | 834 ++++++++++++++++++++++++++++------
2 files changed, 699 insertions(+), 136 deletions(-)
--
2.26.2
Add 88200Hz and 176400Hz sample rates support for TX.
Add 88200Hz, 176400Hz, 192000Hz sample rates support for RX.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/1602557360-18795-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX8QM, there are separate interrupts for TX and RX.
As the EDMA can't be configured to swing back to first FIFO
after writing the second FIFO, so we need to force the burst
size to be 2 on i.MX8QM. And EDMA don't support to shift
the data from S24_LE to S16_LE, so the supported TX format
is also different on i.MX8QM.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1602739728-4433-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP supports different audio configurations other than I2S.
This patch will fix acp driver probe failure for other audio
configurations.
Tested-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/1603476441-3506-1-git-send-email-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the two-step copy-and-convert in
wm5102_out_comp_coeff_put() with get_unaligned_be16(). Apart from
looking nicer, it avoids this sparse warning:
wm5102.c:687:35: sparse: sparse: cast to restricted __be16
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201015102703.24622-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The change removes the platform_data include/definition. It only contains
some values for the MICBIAS.
These are moved into 'dt-bindings/sound/adi,adau1977.h' so that they can be
used inside device-trees. When moving then, they need to be converted to
pre-compiler defines, so that the DT compiler can understand them.
The driver then, also needs to include the new
'dt-bindings/sound/adi,adau1977.h' file.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201019105313.24862-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TI PCM5102A codec driver can be used with the generic sound card
drivers, so it should be selectable. For example, with the addition
of #sound-dai-cells = <0> property in DT, it can be used with simple/graph
card drivers.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201012141911.3150996-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All platforms that use the jz4740-i2s driver have been switched to
devicetree for a while now and the assignment of the DMA peripheral ID
is done in the devicetree.
It is no longer necessary to manually assign the peripheral ID in the
driver, so remove that. The DMA driver does not even look at the value
assigned in the driver anymore and always uses the value provided by the
devicetree.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201023092346.5777-1-lars@metafoo.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to Qualcomm Robotics RB5 Development Kit based on
QRB5165 Robotics SoC. This board has 2 WSA881X smart speakers
with onboard DMIC connected to internal LPASS codec via WSA
and VA macros respectively.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201026170947.10567-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().
static int soc_pcm_hw_params(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return ret;
^ component_err:
| ...
| interface_err:
(A) ...
| codec_err:
| ...
v return ret;
}
The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.
Now, soc_pcm_hw_params/free() are handling
1) snd_soc_link_hw_params/free()
2) snd_soc_pcm_component_hw_params/free()
3) snd_soc_dai_hw_params/free()
Now, 1) to 3) are handled.
This patch adds new soc_pcm_hw_clean() and call it from
soc_pcm_hw_params() as rollback, and from soc_pcm_hw_free() as
normal close handler.
Other difference is that soc_pcm_hw_free() handles digital mute
if it was last user. Rollback also handles it by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7rhgqab.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().
static int soc_pcm_hw_params(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return ret;
^ component_err:
| ...
| interface_err:
(A) ...
| codec_err:
| ...
v return ret;
}
The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.
Now, soc_pcm_hw_params/free() are handling
1) snd_soc_link_hw_params/free()
2) snd_soc_pcm_component_hw_params/free()
=> 3) snd_soc_dai_hw_params/free()
This patch is for 3) snd_soc_dai_hw_params/free().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when hw_params() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *previous* hw_params() only now,
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imbxgqai.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().
static int soc_pcm_hw_params(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return ret;
^ component_err:
| ...
| interface_err:
(A) ...
| codec_err:
| ...
v return ret;
}
The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.
Now, soc_pcm_hw_params/free() are handling
1) snd_soc_link_hw_params/free()
=> 2) snd_soc_pcm_component_hw_params/free()
3) snd_soc_dai_hw_params/free()
This patch is for 2) snd_soc_pcm_component_hw_params/free().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when hw_params() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *previous* hw_params() only now,
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0wdgqav.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().
static int soc_pcm_hw_params(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return ret;
^ component_err:
| ...
| interface_err:
(A) ...
| codec_err:
| ...
v return ret;
}
The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.
Now, soc_pcm_hw_params/free() are handling
=> 1) snd_soc_link_hw_params/free()
2) snd_soc_pcm_component_hw_params/free()
3) snd_soc_dai_hw_params/free()
This patch is for 1) snd_soc_link_hw_params/free().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when hw_params() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here ist that it cares *previous* hw_params() only now,
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfgtgqba.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves soc_pcm_hw_free() next to soc_pcm_hw_params().
This is prepare for soc_pcm_hw_params() cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mu19gqbh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should only use the type, the const attribute makes no sense in
sizeof().
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200930152026.3902186-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should only use the type, the const attribute makes no sense in
sizeof().
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200930152026.3902186-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
XCVR (Audio Transceiver) is a on-chip functional module found
on i.MX8MP. It support HDMI2.1 eARC, HDMI1.4 ARC and SPDIF.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20201013121733.83684-2-viorel.suman@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1602407979-29038-8-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/1602407979-29038-7-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/1602407979-29038-4-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1602407979-29038-2-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
AIF3 has some differences from AIF1 and AIF2:
- It supports one channel only
- It supports master mode only
- It is not directly connected to any of the mixers; instead all audio
goes through a mux with AIF2.
- It does not have its own clock dividers; instead it reuses AIF2 BCLK
and LRCK. This means that when both AIF2 and AIF3 are active, they
must use the same sample rate and total frame width. Since AIF2 and
AIF3 are only used for codec2codec DAI links, constraints are not
applicable here; the only thing we can do when the rates don't match
is report an error.
Make the necessary adjustments to support this AIF.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-18-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds support for AIF2, which is stereo and has fullly independent
clocking capability, making it very similar to AIF1.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-17-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The AIF clock control register has the same layout for all three AIFs.
The only difference between them is that AIF3 is missing some fields. We
can reuse the same register field definitions for all three registers,
and use the DAI ID to select the correct register address.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201014061941.4306-16-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the DAI clock setup is correct for all hardware-supported PCM
formats, we can enable them in the driver. With the appropriate support
in the CPU DAI driver, this allows userspace to access the additional
formats.
Since this codec is connected to the CPU via a DAI, not directly, we do
not care if the CPU DAI is using 3-byte or 4-byte formats, so we can
support them both.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-15-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we guarantee that SYSCLK is running at the optimal rate when
hw_params succeeds, and that it will continue running at that rate,
SYSCLK will always be an integer multiple of BCLK. So we can always
pick the exact divider, not just the closest divider.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-14-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec's clock input is shared among all AIFs, and shared with other
audio-related hardware in the SoC, including I2S and SPDIF controllers.
To ensure sample rates selected by userspace or by codec2codec DAI links
are maintained, the clock rate must be protected while it is in use.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201014061941.4306-13-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
While another stream is active, only allow userspace to use sample rates
that are compatible with the current SYSCLK frequency. This ensures the
actual sample rate will always match what is given in hw_params.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-12-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sun8i codec has three clock/sample rate domains:
- The AIF1 domain, with a sample rate equal to AIF1 LRCK
- The AIF2 domain, with a sample rate equal to AIF2 LRCK
- The SYSCLK domain, containing the ADC, DAC, and effects (AGC/DRC),
with a sample rate given by a divisor from SYSCLK. The divisor is
controlled by the AIF1_FS or AIF2_FS field in SYS_SR_CTRL, depending
on if SYSCLK's source is AIF1CLK or AIF2CLK, respectively. The exact
sample rate depends on if SYSCLK is running at 22.6 MHz or 24.6 MHz.
When an AIF (currently only AIF1) is active, the ADC and DAC should run
at that sample rate to avoid artifacting. Sample rate conversion is only
available when multiple AIFs are active and are routed to each other;
this means the sample rate conversion hardware usually cannot be used.
Only attach the event hook to the channel 0 AIF widgets, since we only
need one event when a DAI stream starts or stops. Channel 0 is always
brought up with a DAI stream, regardless of the number of channels in
the stream.
The ADC and DAC (along with their effects blocks) can be used even if
no AIFs are in use. In that case, we should select an appropriate sample
rate divisor, instead of keeping the last-used AIF sample rate.
44.1/48 kHz was chosen to balance audio quality and power consumption.
Since the sample rate is tied to active AIF paths, disabling pmdown_time
allows switching to the optimal sample rate immediately, instead of
after a 5 second delay.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201014061941.4306-11-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The system sample rate programmed into the hardware is really a clock
divider from SYSCLK to the ADC and DAC. Since we support two SYSCLK
frequencies, we can use all sample rates corresponding to one of those
frequencies divided by any available divisor.
This commit enables support for those sample rates. It also stops
advertising support for a 64 kHz sample rate, which is not supported.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-10-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The AIFs have a single register controlling DAI parameters in both
directions, including BCLK/LRCK divisor and word size. The DAIs produce
only noise or silence if any of these parameters is wrong. Therefore, we
need to enforce symmetry for these parameters, so starting a new
substream will not break an existing substream.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-9-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that BCLK and LRCK rate calculations in the driver can handle any
hardware-supported slot width and number of slots, allow overriding
those parameters from the device tree.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-8-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously, the BCLK divisor calculation assumed zero padding and
exactly two slots. In order to support the TDM slot binding and
20/24-bit word sizes, those assumptions must be removed.
Due to hardware limitations, the BCLK/LRCK ratio is not as simple as
"slot_width * slots". However, the correct value is already calculated
elsewhere in this function, since it must also be programmed into the
hardware. Reuse that value to calculate the correct SYSCLK/BCLK divisor.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec supports only power-of-two BCLK/LRCK divisors. If either the
slot width or the number of slots is not a power of two, the LRCK
divisor must be rounded up to provide enough space. To do that, use
order_base_2 (instead of ilog2, which rounds down).
Since the rounded divisor is also needed for setting the SYSCLK/BCLK
divisor, return the order base 2 instead of fully calculating the
hardware register encoding.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-6-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The hardware supports 8 to 24-bit word sizes on all three of its DAIs,
only one of which is connected to the CPU DAI. Program the word size
based on the actual selected format, instead of assuming limitations
from another driver (which, incedentally, has patches pending to remove
that limitation).
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When using the I2S, LEFT_J, or RIGHT_J format, the hardware supports
independent BCLK and LRCK inversion control. When using DSP_A or DSP_B,
LRCK inversion is not supported. The register bit is repurposed to
select between DSP_A and DSP_B. Extend the driver to support this.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201014061941.4306-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The LRCK inversion bit has a different meaning in DSP mode: it selects
between the DSP A and DSP B formats. To support this, we need to know if
the selected format is a DSP format. One easy way to do this is to set
the format field before the clock inversion fields.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for adding additional DAIs to this component, convert the
DAI driver definition to an array. Since this changes all of the lines
in the definition anyway, let's move it closer to the ops function
definitions, instead of on the far side of the DAPM arrays. And while
moving the DAI driver ops, rename the set_fmt hook to match the usual
naming scheme.
Give the existing DAI an explicit ID and more meaningful stream names,
so it will remain unique as more DAIs are added. The AIF widget streams
must be updated to match.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20201014061941.4306-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Kernel-doc markups should use this format:
identifier - description
There is a common comment marked, instead, with kernel-doc
notation.
Some identifiers have different names between their prototypes
and the kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/535182d6f55d7a7de293dda9676df68f5f60afc6.1603469755.git.mchehab+huawei@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----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=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
Just a few additional small and trivial fixes.
-----BEGIN PGP SIGNATURE-----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=sYVq
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few additional small and trivial fixes"
* tag 'sound-fix-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix the return value if cb func is already registered
ALSA: usb-audio: Line6 Pod Go interface requires static clock rate quirk
ALSA: hda/ca0132: make some const arrays static, makes object smaller
ALSA: sparc: dbri: fix repeated word 'the'
Do not emit a warning for extended firmware header fields that are
not used by kernel. This creates unnecessary noise to kernel logs like:
sof-audio-pci 0000:00:1f.3: warning: unknown ext header type 3 size 0x1c
sof-audio-pci 0000:00:1f.3: warning: unknown ext header type 4 size 0x10
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201021182419.1160391-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A delay must be introduced before the shutdown down of the mclk,
as stated in CS42L51 datasheet. Otherwise the codec may
produce some noise after the end of DAPM power down sequence.
The delay between DAC and CLOCK_SUPPLY widgets is too short.
Add a delay in mclk shutdown request to manage the shutdown delay
explicitly. From experiments, at least 10ms delay is necessary.
Set delay to 20ms as recommended in Documentation/timers/timers-howto.rst
when using msleep().
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20201020150109.482-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the current state of code, we would endup with something like
below in /proc/asound/cards for 2 machines based on this driver.
Machine 1:
0 [DB845c ]: DB845c - DB845c
DB845c
Machine 2:
0 [LenovoYOGAC6301]: Lenovo-YOGA-C63 - Lenovo-YOGA-C630-13Q50
LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216
This is not very UCM friendly both w.r.t to common up configs and
card identification, and UCM2 became totally not usefull with just
one ucm sdm845.conf for two machines which have different setups
w.r.t HDMI and other dais.
Reasons for such thing is partly because Qualcomm machine drivers never
cared to set driver_name.
This patch sets up driver name for the this driver to sort out the
UCM integration issues!
after this patch contents of /proc/asound/cards:
Machine 1:
0 [DB845c ]: sdm845 - DB845c
DB845c
Machine 2:
0 [LenovoYOGAC6301]: sdm845 - Lenovo-YOGA-C630-13Q50
LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216
with this its possible to align with what UCM2 expects and we can have
sdm845/DB845.conf
sdm845/LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216.conf
... for board variants. This should scale much better!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201023095849.22894-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing supported rates and formats for the stream, without
which attempt to do playback will fail to find any matching rates/format.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201022130518.31723-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If the cb function is already registered, should return the pointer
of the structure hda_jack_callback which contains this cb func, but
instead it returns the NULL.
Now fix it by replacing func_is_already_in_callback_list() with
find_callback_from_list().
Fixes: f4794c6064 ("ALSA: hda - Don't register a cb func if it is registered already")
Reported-and-suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20201022030221.22393-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently released Line6 Pod Go requires static clock rate quirk to make
its usb audio interface working. Added its usb id to the list of similar
line6 devices.
Signed-off-by: Lukasz Halman <lukasz.halman@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201020061409.GA24382@TAG009442538903
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Don't populate const arrays on the stack but instead make them
static. Makes the object code smaller by 57 bytes.
Before:
text data bss dec hex filename
173256 38016 192 211464 33a08 sound/pci/hda/patch_ca0132.o
After:
text data bss dec hex filename
172879 38336 192 211407 339cf sound/pci/hda/patch_ca0132.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201016224913.687724-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
The amount of changes is smaller at this round (what a surprise),
but lots of activity is seen. Most of changes are about ASoC
driver development, especially Intel platforms.
Here are some highlights:
General:
* Replace all tasklet usages with other alternatives
* Cleanup of the ASoC error unwinding code
* Fixes for trivial issues caught by static checker
* Spell fixes allover the places
ALSA Core:
* Lockdep fix for control devices
* Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
* SoundBlaster AE-7 support
* Changes in quirk table for the rename handling
* Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
* Lots of updates for Intel SOF and SoundWire enablement
* Replacement of the DSP driver for some older x86 systems;
the new code was written from scratch, better maintenance
expected
* Helpers for parsing auxiluary devices from the device tree
* New support for AllWinner A64, Cirrus Logic CS4234, Mediatek
MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P,
and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764
-----BEGIN PGP SIGNATURE-----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=nWAp
-----END PGP SIGNATURE-----
Merge tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The amount of changes is smaller at this round (what a surprise), but
lots of activity is seen. Most of changes are about ASoC driver
development, especially Intel platforms. Here are some highlights:
General:
- Replace all tasklet usages with other alternatives
- Cleanup of the ASoC error unwinding code
- Fixes for trivial issues caught by static checker
- Spell fixes allover the places
ALSA Core:
- Lockdep fix for control devices
- Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
- SoundBlaster AE-7 support
- Changes in quirk table for the rename handling
- Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
- Lots of updates for Intel SOF and SoundWire enablement
- Replacement of the DSP driver for some older x86 systems; the new
code was written from scratch, better maintenance expected
- Helpers for parsing auxiluary devices from the device tree
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764"
* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
ALSA: hda: fix jack detection with Realtek codecs when in D3
ALSA: fireworks: use semicolons rather than commas to separate statements
ALSA: hda: use semicolons rather than commas to separate statements
ALSA: hda/i915 - fix list corruption with concurrent probes
ASoC: dmaengine: Document support for TX only or RX only streams
ASoC: mchp-spdiftx: remove 'TX' from playback stream name
ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
ASoC: tas2764: Add the driver for the TAS2764
dt-bindings: tas2764: Add the TAS2764 binding doc
ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
ASoC: stm32: dfsdm: add actual resolution trace
ASoC: stm32: dfsdm: change rate limits
ASoC: qcom: sc7180: Add support for audio over DP
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass:Update lpaif_dmactl members order
Asoc:qcom:lpass-cpu:Update dts property read API
ASoC: dt-bindings: Add dt binding for lpass hdmi
...
Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A
/bTQ42c/WRQ+LU828GSM
=6sO2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
binder: fix UAF when releasing todo list
docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
misc: Kconfig: fix a HISI_HIKEY_USB dependency
LSM: Fix type of id parameter in kernel_post_load_data prototype
misc: Kconfig: add a new dependency for HISI_HIKEY_USB
firmware_loader: fix a kernel-doc markup
w1: w1_therm: make w1_poll_completion static
binder: simplify the return expression of binder_mmap
test_firmware: Test partial read support
firmware: Add request_partial_firmware_into_buf()
firmware: Store opt_flags in fw_priv
fs/kernel_file_read: Add "offset" arg for partial reads
IMA: Add support for file reads without contents
LSM: Add "contents" flag to kernel_read_file hook
module: Call security_kernel_post_load_data()
firmware_loader: Use security_post_load_data()
LSM: Introduce kernel_post_load_data() hook
fs/kernel_read_file: Add file_size output argument
fs/kernel_read_file: Switch buffer size arg to size_t
fs/kernel_read_file: Remove redundant size argument
...
Stress tests show that DSP may occasionally be late with signaling WAIT
state when all pins are made use of simultaneously plus start/stop
(pause) gets involved. While this isn't tied to standard audio scenarios
where only System Pin (playback and capture) is involved, ensure user is
not hindered when playing with more advanced scenarios.
>From DSP perspective, clock acts as a resource: low clock equals less
resources, high clock more resources. Relax clock selection procedure so
only low -> high switch is allowed when awaiting WAIT signal times out.
Once active stream count decreases, DSP will have more time internally to
adjust thus low clock selection becomes possible again.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201012103221.30759-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
catpt_dai_pcm_new() invoked during new PCM runtime creation configures
SSP by sending IPC to DSP firmware. For that to succeed device needs to
be up and running. While components default probing behavior -
snd_soc_catpt causing machine board module to load just after it - needs
no changes, machine board's module may be unloaded and re-loaded at a
different time e.g.: when catpt is already asleep.
Wake device explicitly in catpt_dai_pcm_new() to ensure communication is
established before sending any IPCs, enabling those advanced scenarios
in the process.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201012103221.30759-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SST_IPC and its _PCI and _ACPI variants all target
sound/soc/intel/atom solution alone. SND_SST_IPC is the core component,
required for PCI and ACPI based atom platforms both. _PCI and _ACPI
target Merrifield/Edison and Baytrial/Cherrytrail platforms
respectively.
On top of that, there is an equivalent set of configs targeting the same
solution:
- SND_SST_ATOM_HIFI2_PLATFORM (core)
- SND_SST_ATOM_HIFI2_PLATFORM_PCI
- SND_SST_ATOM_HIFI2_PLATFORM_ACPI
As both sets do the same job - allow for granular platform selection -
remove the duplicate set and rely on SND_SST_ATOM_HIFI2_PLATOFRM_XXX
configs alone.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201012095005.29859-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A race exists between closing a PCM and update of ELD data. In
hdmi_pcm_close(), hinfo->nid value is modified without taking
spec->pcm_lock. If this happens concurrently while processing an ELD
update in hdmi_pcm_setup_pin(), converter assignment may be done
incorrectly.
This bug was found by hitting a WARN_ON in snd_hda_spdif_ctls_assign()
in a HDMI receiver connection stress test:
[2739.684569] WARNING: CPU: 5 PID: 2090 at sound/pci/hda/patch_hdmi.c:1898 check_non_pcm_per_cvt+0x41/0x50 [snd_hda_codec_hdmi]
...
[2739.684707] Call Trace:
[2739.684720] update_eld+0x121/0x5a0 [snd_hda_codec_hdmi]
[2739.684736] hdmi_present_sense+0x21e/0x3b0 [snd_hda_codec_hdmi]
[2739.684750] check_presence_and_report+0x81/0xd0 [snd_hda_codec_hdmi]
[2739.684842] intel_audio_codec_enable+0x122/0x190 [i915]
Fixes: 42b2987079 ("ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201013152628.920764-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Not a huge amount going on in the core for ASoC this time but quite a
lot of driver activity, especially for the Intel platforms:
- Replacement of the DSP driver for some older x86 systems with a new
one which was written with closer reference to the DSP firmware so
should hopefully be more robust and maintainable.
- A big batch of static checker and other fixes for the rest of the x86
DSP drivers.
- Cleanup of the error unwinding code from Morimoto-san, hopefully
making it more robust.
- Helpers for parsing auxiluary devices from the device tree from
Stephan Gerhold.
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+EToAACgkQJNaLcl1U
h9AVGwgAghl0dybTqjd1G0i0qOK5AXAdgZaDSstOI++xAd50i0LHlkEMN8/XTcMB
vks1Nt3NIF7E0DAECZ93ZMA3tSJItIuq4RPjFLBbQz7550xIA9G/h1ff9+piltmi
8M2HREH1J2z8HflSW5ZPy9sN0Vk71utni984WO/OI6tvWt2CxTTkOM6nt6p4TsKp
EIHU2rrxeZ+fh+qJrf3WXCsI3CCFAFtADYQO8LCNrZDkmosqRLDNQY/88C1Gy/Zo
d8SM2wrjc+BHDdxA3xSQxZmOq7XCe/7+fTluDYpoci9MvtL6QdlgfH2kqAwtqxRB
BG58pVJDGrW/68rRHUNl5ti4JL9F0g==
=4ONt
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.10
Not a huge amount going on in the core for ASoC this time but quite a
lot of driver activity, especially for the Intel platforms:
- Replacement of the DSP driver for some older x86 systems with a new
one which was written with closer reference to the DSP firmware so
should hopefully be more robust and maintainable.
- A big batch of static checker and other fixes for the rest of the x86
DSP drivers.
- Cleanup of the error unwinding code from Morimoto-san, hopefully
making it more robust.
- Helpers for parsing auxiluary devices from the device tree from
Stephan Gerhold.
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764
In case HDA controller becomes active, but codec is runtime suspended,
jack detection is not successful and no interrupt is raised. This has
been observed with multiple Realtek codecs and HDA controllers from
different vendors. Bug does not occur if both codec and controller are
active, or both are in suspend. Bug can be easily hit on desktop systems
with no built-in speaker.
The problem can be fixed by powering up the codec once after every
controller runtime resume. Even if codec goes back to suspend later, the
jack detection will continue to work. Add a flag to 'hda_codec' to
describe codecs that require this flow from the controller driver.
Modify __azx_runtime_resume() to use pm_request_resume() to make the
intent clearer.
Mark all Realtek codecs with the new forced_resume flag.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209379
Cc: Kailang Yang <kailang@realtek.com>
Co-developed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201012102704.794423-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/1602407979-29038-5-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current hdac_i915 uses a static completion instance to wait
for i915 driver to complete the component bind.
This design is not safe if multiple HDA controllers are active and
communicating with different i915 instances, and can lead to list
corruption and failed audio driver probe.
Fix the design by moving completion mechanism to common acomp
code and remove the related code from hdac_i915.
Fixes: 7b882fe3e3 ("ALSA: hda - handle multiple i915 device instances")
Co-developed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201006161722.500256-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We intentionally do not return an error if we get a permanent failure
from dma_request_chan() in order to support systems which have TX only
or RX only channels. Add a comment documenting this.
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20201008161105.21804-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Widening of the supported rate range in the STM32 DFSDM driver.
The rates were previously limited to 8kHz, 16kHz and 32kHz.
Allow rate capture in the whole range 8kHz-48kHz as there is no hardware
limitation to support it.
Actual sample resolution is dependent on audio rate and DFSDM configuration.
Add a trace to allow simple check of sample resolution.
Olivier Moysan (2):
ASoC: stm32: dfsdm: change rate limits
ASoC: stm32: dfsdm: add actual resolution trace
drivers/iio/adc/stm32-dfsdm-adc.c | 4 ++++
drivers/iio/adc/stm32-dfsdm.h | 2 ++
sound/soc/stm/stm32_adfsdm.c | 8 +++-----
3 files changed, 9 insertions(+), 5 deletions(-)
--
2.17.1
These patches are to support audio over DP port on Qualcomm's SC7180 LPASS
Asoc. It includes machine driver, cpu driver, platform driver updates for
HDMI path support, device tree documention, lpass variant structure
optimization and configuration changes.
These patches depends on the DP patch series
https://patchwork.kernel.org/project/dri-devel/list/?series=332029https://lore.kernel.org/patchwork/project/lkml/list/?series=464856
changes since V10:
-- Moved hdmi regmap functions from lpass-hdmi.c to lpass-cpu.c
-- Moved QCOM_REGMAP_FIELD_ALLOC macro from lpass-hdmi.c to lpass.h
changes since V9:
-- Removed unused structures lpass_hdmi.h
changes since V8:
-- Removed redundant structure wrapper for reg map field memebrs
-- Updated lpass_hdmi_regmap_volatile API with appropriate registers as true
and others as false.
changes since V7:
-- Fixed typo errors
-- Created Separate patch for buffer size change
changes since V6:
-- Removed compile time define flag, which used for enabling
HDMI code, based on corresponding config param is included.
-- Updated reg map alloc API with reg map bulk API.
-- Removed unnecessary line splits
changes since V5:
-- Removed unused struct regmap *map in lpass_platform_alloc_hdmidmactl_fields.
-- DMA alloc and free API signature change in lpass-apq8016.c, lpass-ipq806x.c
-- Keeping API "irqreturn_t lpass_platform_hdmiif_irq" under ifdef macro
Changes Since v4:
-- Updated with single compatible node for both I2S and HDMI.
Changes Since v3:
-- Removed id in lpass variant structure and used snd_soc_dai_driver id.
Changes Since v2:
-- Audio buffer size(i.e. LPASS_PLATFORM_BUFFER_SIZE) in lpass-platform.c increased.
Changes Since v1:
-- Commit messages are updated
-- Addressed Rob Herring review comments
V Sujith Kumar Reddy (7):
ASoC: Add sc7180-lpass binding header hdmi define
ASoC: dt-bindings: Add dt binding for lpass hdmi
Asoc:qcom:lpass-cpu:Update dts property read API
Asoc: qcom: lpass:Update lpaif_dmactl members order
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: sc7180: Add support for audio over DP
.../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 74 ++--
include/dt-bindings/sound/sc7180-lpass.h | 1 +
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/Makefile | 2 +
sound/soc/qcom/lpass-apq8016.c | 4 +-
sound/soc/qcom/lpass-cpu.c | 249 ++++++++++++-
sound/soc/qcom/lpass-hdmi.c | 258 ++++++++++++++
sound/soc/qcom/lpass-hdmi.h | 102 ++++++
sound/soc/qcom/lpass-ipq806x.c | 4 +-
sound/soc/qcom/lpass-lpaif-reg.h | 49 ++-
sound/soc/qcom/lpass-platform.c | 395 +++++++++++++++++----
sound/soc/qcom/lpass-sc7180.c | 116 +++++-
sound/soc/qcom/lpass.h | 124 ++++++-
13 files changed, 1240 insertions(+), 143 deletions(-)
create mode 100644 sound/soc/qcom/lpass-hdmi.c
create mode 100644 sound/soc/qcom/lpass-hdmi.h
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
At this point mcasp->dev is not initialized and we would have NULL pointer
dereference if we would have failed to get the mem memory resource by
name.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201008085400.19944-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce the Texas Instruments TAS2764 amplifier driver
with I/V sense for loud speaker applications.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20201007155341.10139-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
module_is_live() is available only when CONFIG_MODULES is enabled.
Replace its usage with try_module_get() which is present regardless of
said config's status.
Fixes: 7a10b66a5d ("ASoC: Intel: catpt: Device driver lifecycle")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201007135701.20372-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DFSDM can support a larger rate range than currently
supported in driver.
Increase rate upper limit to 48kHz and allow all rates
in the range 8kHz to 48kHz.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20201007153459.22155-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for audio playback over DP in lpass
sc7180 platform driver. Update lpass_variant
structure for hdmi data configuaration.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-8-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Upadate lpass cpu and platform driver to support audio over dp.
Also add lpass-hdmi.c and lpass-hdmi.h.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-6-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the lpaif_dmactl struct members order to match
HDMI reg map members sequence. Separate Interface reg map
as it is used for I2S control but not for HDMI control,
to make use of bulk API, which makes code more readable.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-5-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update dts property read API call with platform get property
by name, as it make code more readable and avoid conflicts
when array of properties to be used.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-4-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On a HP ZCentral, the front Mic could not be detected.
The codec of the HP ZCentrol is alc671 and it needs to override the pin
configuration to enable the headset mic.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201008105645.65505-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The "count" variable needs to be capped on every path so that we don't
copy too much information to the user.
Fixes: 618eabeae7 ("ALSA: bebob: Add hwdep interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201007074928.GA2529578@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS D700SA desktop's audio (1043:2390) with ALC887 cannot detect
the headset microphone and another headphone jack until
ALC887_FIXUP_ASUS_HMIC and ALC887_FIXUP_ASUS_AUDIO quirks are applied.
The NID 0x15 maps as the headset microphone and NID 0x19 maps as another
headphone jack. Also need the function like alc887_fixup_asus_jack to
enable the audio jacks.
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201007052224.22611-1-jhp@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201006152024.542418-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 9c34d023dc ("ASoC: omap-mcbsp: Re-arrange files for core McBSP
and Sidetone function split"), in rearranging various files, also replaced
calls to platform_get_resource_by_name() + devm_ioremap_resource() with a
single call to devm_platform_ioremap_resource_byname(). However, the
struct resource is needed as we access its members so at present a null
pointer is dereferenced. Fix by doing things the old way.
Fixes: 9c34d023dc ("ASoC: omap-mcbsp: Re-arrange files for core McBSP and Sidetone function split")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Link: https://lore.kernel.org/r/20201004102535.325547-1-alex.dewar90@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While sst_dsp_get_thread_context() is declared as solution-agnostic, it
is only used by /skylake/ solution. Majority of thread_context field
usages are direct accesses. Improve code cohesiveness and convert to
single usage model.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct sst_pdata is unused among remaining /sound/soc/intel solution so
remove it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With sound/soc/intel/haswell and /baytrail gone, registers left within
sst-dsp header are atom-specific. Relocate these to atom internal header
to make atom truely independent of sound/soc/common processing code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As sound/soc/intel/haswell and /baytrail are no more, all SST-legacy
specific constants and registers are redundant so remove them.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With redundant DSP operations removed, several fields for structures:
sst_ops, sst_addr and sst_dsp become obsolete. Remove them too.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/intel/common/ declares several helper functions for /intel/
solutions. In practice, differences between these - /haswell/ and
/skylake/ especially - led to many of the helpers being used only by a
single solution. As /skylake/ makes no use of these and /haswell/ and
/baytail/ are no more, remove the unused functions.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Skylake driver makes no use of ram_read or ram_write operation so remove
the assignments. This prepares sound/soc/common/sst-dsp* for following
removal of unused DSP operations.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sst-firmware is host to many image loading over DMA operations. Majority
of code targets sound/soc/intel/haswell solution as /baytrail/ never
switched to DMA-based firmware loading. With /haswell/ removed this code
serves no purpose. Address this redundancy.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
baytrail and haswell solutions present within sound/soc/intel are the
only users of sst-acpi componenent and with them removed it becomes
redundant so remove it too.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/intel/baytrail is a niche solution which supports limited
number of BYT products - as described by
snd_soc_acpi_intel_baytrail_legacy_machines table. For a long time it's
deprecated in favor of sound/soc/intel/atom solution with SOF providing
support for some products too effectively rendering /baytrail/ redundant.
Remove deprecated code from ASoC tree.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
byt-rt5640 is deprecated in favor of bytcr_rt5640 used by
sound/soc/intel/atom and SOF solutions both. Remove redundant machine
board and all related code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
byt-max98090 is deprecated in favor of cht-bsw-max98090 used by
sound/soc/intel/atom and SOF solutions both. Remove redundant machine
board and all related code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Newly added catpt solution found in sound/soc/intel/catpt is a direct
replacement to sound/soc/intel/haswell. It covers all features supported
by it and more - by aligning to recommended flows and requirement list
based on Windows driver equivalent. No harm is done to userspace as
catpt - similarly to haswell - loads no extenal topology files while
sharing the exact same ADSP firmware binary.
Given the above, existing haswell code is redundant so remove it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DA7219 uses I2S2 and I2S3 for input and output respectively. Commit
9e30251fb2 ("ASoC: mediatek: mt8183-da7219: support machine driver
with rt1015") introduces a bug that:
- If using I2S2 solely, MCLK to DA7219 is 256FS.
- If using I2S3 solely, MCLK to DA7219 is 128FS.
- If using I2S3 first and then I2S2, the MCLK changes from 128FS to
256FS. As a result, no sound output to the headset. Also no sound
input from the headset microphone.
Both I2S2 and I2S3 should set MCLK to 256FS. Fixes the wrong ops for
I2S3.
Fixes: 9e30251fb2 ("ASoC: mediatek: mt8183-da7219: support machine driver with rt1015")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201006101252.1890385-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series adds support the other two AIFs present in the sun8i codec,
which can be used for codec2codec DAI links.
This series first cleans up the DAPM component driver so there is an
organized place to put the new widgets. Then it fills out the DAI
driver, removing assumptions that were made for AIF1 (16 bits, 2
channels, certain clock inversions). Some new logic is required to
handle 3 DAIs and the ADC/DAC sharing the same clock. Finally, it adds
the new DAIs, and hooks them up with DAPM widgets and routes per the
hardware topology.
To minimize the number of patches in this series, related device tree
patches (increasing #sound-dai-cells, adding new DAI links) will be sent
separately.
Samuel Holland (25):
ASoC: sun8i-codec: Set up clock tree at probe time
ASoC: sun8i-codec: Swap module clock/reset dependencies
ASoC: sun8i-codec: Sort DAPM controls, widgets, and routes
ASoC: sun8i-codec: Consistently name DAPM widgets and routes
ASoC: sun8i-codec: Correct DAPM widget types
ASoC: sun8i-codec: Fix AIF widget channel references
ASoC: sun8i-codec: Enable AIF mono/stereo control
ASoC: sun8i-codec: Use snd_soc_dai_get_drvdata
ASoC: sun8i-codec: Prepare to extend the DAI driver
ASoC: sun8i-codec: Program format before clock inversion
ASoC: sun8i-codec: Enable all supported clock inversions
ASoC: sun8i-codec: Program the correct word size
ASoC: sun8i-codec: Round up the LRCK divisor
ASoC: sun8i-codec: Correct the BCLK divisor calculation
ASoC: sun8i-codec: Support the TDM slot binding
ASoC: sun8i-codec: Enforce symmetric DAI parameters
ASoC: sun8i-codec: Enable all supported sample rates
ASoC: sun8i-codec: Automatically set the system sample rate
ASoC: sun8i-codec: Constrain to compatible sample rates
ASoC: sun8i-codec: Protect the clock rate while streams are open
ASoC: sun8i-codec: Require an exact BCLK divisor match
ASoC: sun8i-codec: Enable all supported PCM formats
ASoC: sun8i-codec: Generalize AIF clock control
ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF2
ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF3
sound/soc/sunxi/sun8i-codec.c | 1135 ++++++++++++++++++++++++++-------
1 file changed, 894 insertions(+), 241 deletions(-)
--
2.26.2
RT715 and RT714 are essentially the same chip. In addition, there are
two versions, one supporting SoundWire 1.1 and one supporting
SoundWire 1.2 (SDCA).
The previous configurations assumed that RT714 was SDCA-only, which
isn't correct. Add support for the 4 possible combinations to avoid
confusions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Jack Yu <jack.yu@realtek.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201002211902.287692-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT715 and RT714 are essentially the same chips but with different
SoundWire Dev_ID registers, make sure we can probe the same driver if
RT714 is used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Jack Yu <jack.yu@realtek.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201002211902.287692-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Apply same test as for other amplifiers - in case we enable feedback
one day.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201002211902.287692-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove a level of indirection by getting the device directly from the
passed-in struct snd_soc_dai, instead of going through its component.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-9-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Each left/right pair of AIF input/output channels can be swapped or
combined. This is useful for sending a mono audio source to both sides
of a stereo sink, or for creating complex mixing scenarios.
Add the support to control this feature from userspace.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-8-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Both the left and right side widgets referenced channel 0. This would
unnecessarily power on the right side widget (and its associated path)
when a mono stream was active.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Whie the aif_in and aif_out widget types are handled exactly the same in
the core DAPM code, a future widget event hook will need the correct
widget type to derive the associated substream. Clean up the widget type
for that reason, and so these widgets will match newly-added widgets for
the other AIFs.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-6-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This cleans up the mixer widget names. The AIF1 AD0 Mixer names were
previously wrong -- they do not control the digital side of the ADC. The
DAC mixer widgets were not wrong, but they were verbose and did not
match the naming scheme of the other widgets.
The mixer controls are not renamed because they are exposed to
userspace.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Sort the remaining pieces of the DAPM driver so that they are all in the
same order among controls/widgets/routes, and so they roughly match the
register word and bit order of the hardware. This nicely separates the
AIF-related widgets from the ADC/DAC widgets, which allows the AIF
widgets to stay in a logical order as more AIFs are added to the driver.
No widgets are renamed, to ease verification that this commit makes no
functional change.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This matches the module power-up/down sequence from the vendor's driver.
While updating these widgets/routes, reorder them to match the register
and bit layout of the hardware. This puts them in the same place in the
widget and route arrays (previously they were at opposite ends), and it
makes it easier to track which parts of which registers are implemented.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sun8i codec is effectively an on-die variant of the X-Powers AC100
codec. The AC100 can derive its clocks from either of two I2S master
clocks or an internal PLL. For the on-die variant, Allwinner replaced
the codec's own PLL with a connection to SoC's existing PLL_AUDIO, and
they connected both I2S MCLK inputs to the same source -- which happens
to be an integer divider from the same PLL_AUDIO.
So there's actually no clocking flexibility. To run SYSCLK at the
required rate, it must be run straight from the PLL. The only choice is
whether it goes through AIF1CLK or AIF2CLK. Since both run at the same
rate, the only effect of that choice is which field in SYS_SR_CTRL
(AIF1_FS or AIF2_FS) controls the system sample rate.
Since AIFnCLK is required to bring up the corresponding DAI, and AIF1
(connected to the CPU) is used most often, let's use AIF1CLK as the
SYSCLK parent. That means we no longer need to set AIF2_FS.
Since this clock tree never changes, we can program it from the
component probe function, instead of using DAPM widgets. The DAPM
widgets unnecessarily change clock parents when the codec goes in/out
of idle and the supply widgets are powered up/down.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Sony/Philips Digital Interface Receiver (SPDIFRX) is a serial port
compliant with the IEC-60958 standard. Among its caracteristics, we
mention the following:
- SPDIF/AES-EBU Compatible Serial Port
- 32 Samples FIFO
- Data Width Configurable to 24 bits, 20 bits or 16 bits
- Packed and Unpacked Data Support for System Memory Optimization
- Line State Events Report and Source of Interrupt
- Line Error Rate Report
- Full Memory Map of 192 bits for Channel 1 and Channel 2 Status and
User Data
- First 32-bit Status A, Status B Change Report and Source of Interrupt
- Line Digital Filter
- Register Write Protection
- Abnormal Software Access and Internal Sequencer Integrity Check Reports
This interface is available in Microchip's SAMA7G5 SoC.
Codrin Ciubotariu (2):
dt-bindings: sound: add DT bindings for Microchip S/PDIF RX Controller
ASoC: mchp-spdifrx: add driver for SPDIF RX
.../bindings/sound/mchp,spdifrx.yaml | 73 ++
sound/soc/atmel/Kconfig | 13 +
sound/soc/atmel/Makefile | 2 +
sound/soc/atmel/mchp-spdifrx.c | 954 ++++++++++++++++++
4 files changed, 1042 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
create mode 100644 sound/soc/atmel/mchp-spdifrx.c
--
2.25.1
A deadlock is identified when there are three contexts running at the
same time:
- a HDMI jack work which is calling snd_soc_dapm_sync().
- user space is calling snd_pcm_release() to close pcm device.
- pm is calling runtime suspend function of HDMI codec driver.
By removing the clear_dapm_works() invocation in the
hdac_hdmi_runtime_suspend() function, the snd_pcm_release() could
always returns from dapm_power_widgets() function call without
blocking the hdac_hdmi_jack_dapm_work() work thread or being blocked
by the hdac_hdmi_runtime_suspend() function. The purpose of the jack
work is to enable/disable the dapm jack pin so it's not necessary to
cancel the work in runtime suspend function which is usually called
when pcm device is closed.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/1594818110-786-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new SPDIF RX controller is a serial port compliant with the IEC-60958
standard. It also supports programmable User Data and Channel Status
fields.
This IP is embedded in Microchip's sama7g5 SoC.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201002160305.815523-3-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement support for Lynxpoint and Wildcat Point AudioDSP. Catpt
solution deprecates existing sound/soc/intel/haswell which is removed in
the following series.
Due to high range of errors and desynchronization from recommendations
set by Windows solution, re-write came as a lower-cost solution compared
to refactoring /haswell/ with several series of patches.
Series is dependent on linux-spi change:
spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers
https://www.spinics.net/lists/linux-spi/msg23885.html
which has been already merged and is now part of linux-spi tree.
Bulk of series content is device driver core code - everything up to
patch 7/14 - with fs entries and trace macros introduced right after.
While each core patch is shaped in such a way that no unavailable
members are ever called, until patch 14/14 is applied, no code
compilation can occur as no Makefile is present. Once said patch is
added, Makefile and Kconfig are implemented and driver module compiles
as expected.
Special thanks go to Marcin Barlik and Piotr Papierkowski for sharing
their LPT/WPT AudioDSP architecture expertise as well as helping
backtrack its historical background.
My thanks go to Amadeusz Slawinski for reviews and improvements proposed
on and off the internal list. Most of internal diff below is his
contribution.
Krzysztof Hejmowski helped me setup my own Xtensa environment and
recompile LPT/WPT FW binary sources what sped up the development greatly.
This would not have been possible without help from these champions,
especially considering how quickly the catpt was written: 2 weeks
features, 3 weeks optimizations. Thank you.
Userspace-exposed members are compatible with what is exposed by
deprecated solution as well as FW binary being re-used thus no harm is
done. The only visible differences are: the newly added 'Loopback Mute'
kcontrol and volume support extending to quad from stereo.
On top of fixing erros and design flows, catpt also adds module reload,
dynamic SRAM memory allocation during PCM runtime and exposes missing
userspace API: 'Loopback Mute' kcontrol, quad volume controls and sysfs
fw-version entries. Event tracing is provided to ease solution
debugging.
Following are not included in this update and are scheduled as later
addition:
- fw logging
- module (library) support
Note: LPT power up/down sequences might get aligned with WPT once enough
testing is done as capabilities are shared for both DSPs.
Note #2: Both LPT and WPT power up/down sequences may get optimized in
future updates as thanks to help from the Windows team, most of nuances
behind why/what/when in regard to hw registers have been backtracked and
reviewed again.
Link to developer's deep dive message:
https://www.spinics.net/lists/alsa-devel/msg113563.html
Changes in v10:
- reverted DUAL_MONO case relocation from v9
- indented all constants of enum catpt_module_id to the same column
- new newline appended for return path of catpt_dsp_do_send_msg()
Changes in v9:
https://www.spinics.net/lists/alsa-devel/msg116305.html
- fixed newlines in sysfs as requested by Andy, left tags as no other
changes done
- removed volume_map and replaced by simple formulas for volume kcontrol
calculations
- removed redundant parentheses in catpt_get_channel_map() and
relocated DUAL_MONO case
- runtime suspend no longer called during module unload
- removed redundant size checks for catpt_dsp_send_tx() and
catpt_dsp_copy_rx()
Changes in v8:
https://www.spinics.net/lists/alsa-devel/msg116168.html
- updated catpt_arrange_page_table() with GENMASK and U32_MAX usage
- made use of PFN_DOWN() replacing explicit right shitfs by PAGE_SIZE
- made fw hash dumping in catpt_coredump() more readable and removed
hardcodes
- catpt_coredump() dumps fw hash now only if said segment has been found
within fw_info
- shortened _MSECS suffixes to _MS
- IPC structs no longer contain enum members
- simplified definition of catpt_set_dspvol()
Changes in v7:
https://www.spinics.net/lists/alsa-devel/msg116019.html
- fixed licence header for fs.c
- renamed fs.c to sysfs.c to better match its purpose
- added documentation within Documentation/ABI/testing for entries
exposed by catpt
- bin_attribute fw_build replaced by attribute fw_info:
fw_info contains full FW information and after successful handshake,
it's always available (stored in driver data) so no need to invoke
GET_FW_VERSION IPC again, just dump the stored information
- rather than manually creating and removing sysfs files, now makes use
of dev_groups member of struct device_driver
- patch: 10/14 'ASoC: Intel: Select catpt and deprecate haswell' has
been moved to the back of the list: enable catpt after machine boards
have been prepared for it first
- improved readability of several goto labels
Changes in v6:
https://www.spinics.net/lists/alsa-devel/msg115765.html
- reordered and reorganized code for patches 1/13 - 8/13 of v5, so each
patches makes use of no member or function which is unavailable to it.
Series size increased from 13 to 14 patches: addition of base members
e.g.: registers has been split from addition of device.c file which
describes acpi device behavior
Changes in v5:
https://www.spinics.net/lists/alsa-devel/msg115621.html
Basically everything below is result of Andy's review. Thank you Andy
for taking time into this detailed review
- catpt now makes use of common linux/pxa2xx_ssp.h header file, removing
redundant SSP register declarations in the process. As stated in the
opening, this is dependent upon linux-spi change:
spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers
- updated Kconfig by removing DMADEVICES and adding COMPILE_TEST
as optional depends-on
- updated all register macros definitions to be more safe against common
arithmetics when specifying macro's parameters
- removed CONFIG_PM and CONFIG_PM_SLEEP usage in favor of __maybe_unused
- all 'if (ret < 0)' converted to simple 'if (ret)' whenever possible
- fixed erroneous check for platform_device_register_data within
catpt_register_board()
- _SLAVE/_MASTER replaced with more inclusive _CONSUMER/_PROVIDER for
enum catpt_ssp_mode
- catpt_acpi_probe() is now making use of high-level wrappers for
ioremapping and resource assignment, reducing function's code size
- due to improved catpt_acpi_probe() behavior, catpt_acpi_remove() needs
not to cast dma_free_coherent() any longer
- DMA source and destrination maxburst now of value 16, see:
https://www.spinics.net/lists/alsa-devel/msg114394.html
- simplified catpt_dsp_update_lpclock() as list_for_each_entry() is
empty-safe by default
- dropped '_SSP_' from all names of all CATPT_SSP_SSXXX_DEFAULT macros
- catpt_updatel_pci now makes use of linux/pci.h and uapi/linux/pci.h
constants such as: PCI_PM_CTRL_STATE_MASK and PCI_D3hot
Changes in v4:
https://www.spinics.net/lists/alsa-devel/msg113762.html
- fixed compilation with i386 kconfig (conflicting names)
- streamlined naming for SHIM and PCI registers to match SSP ones
(SHIM_REG -> SHIM)
- catpt_component_probe removed and kcontrols again initializzed
statically via snd_kcontrol_new array: this is to remove
kctl->id.device shenanigans
- renamed catpt_set_ctlvol to catpt_set_dspvol - function name wasn't
matching its purpose
Changes in v3:
- fixed IRAM mask usage in lpt_dsp_power_up (dsp.c)
- updated dbg message formatting in catpt_restore_fwimage as suggested
by Andy
- fixed alignment for struct catpt_ssp_device_format
- catpt_set_ctlvol now verifies all-equal scenario based on all
channels rather than just first two as requested by Amadeo
- fixed SPDX for registers.h
Changes in v2:
https://www.spinics.net/lists/alsa-devel/msg113660.html
- fixed SPDX formatting for all header files as well as pcm.c
- fixed size provided to memcpy() in fw_build_read() as reported by Mark
- renamed struct catpt_pdata to struct catpt_spec (cosmetic)
- fixed erroneous path in catpt_load_block: region is properly released
- trace.h events for updating registers have been removed and usages
replaced by dev_dbg (SRAMPGE/ LPCS)
- as requested by Andy, struct resource has replaced struct catpt_mbank
and struct catpt_mregion. This change cascaded into:
- catpt_mbank_size and catpt_mregion_size replaced by resource_size
- catpt_mregion_intersects replaced by resource_overlaps
- all catpt_mbank_ and catpt_mregion_ handlers found in loader.c
(_request, _reserve, _release, _extract, _split, _join) have been
removed
- __request_region and __release_region have been enlisted in their
place
- catpt_mregion_intersecting renamed to catpt_resource_overlapping
- catpt_request_region helper has been provided to deal with -size
based requests
o haven't found direct replacements in resource.c/ ioport.h for
both functions
- catpt_mbank_create and catpt_mbank_remove renamed to catpt_sram_init
and catpt_sram_free respectively
- catpt_sram_init now returns void instead of int and has been
converted to simple initialized. This change ultimately cascaded
into:
o both SRAM banks initialization being moved to catpt_dev_init
from catpt_acpi_probe (device.c)
o catpt_dev::spec is now initialized first, with catpt_dev_init
following it soon after
o catpt_acpi_probe erroneous path has been simplified as SRAM
banks no longer need to be freed
- catpt_sram_free now frees all resources via child -> sibling
enumeration rather than region_list iteration
- catpt_dsp_update_srampge and catpt_dsp_set_srampge now accept new
argument: unsigned long mask. Caused by removal of catpt_mbank -
mask is taken directly from catpt_dev::spec::d/iram_mask
- trace.h events for catpt_mbank and catpt_mregion have been removed
Diff against last drop on internal list:
https://www.spinics.net/lists/alsa-devel/msg113549.html
- replaced spinlock with mutex for mregion allocation and release to
address sleeping in atomic context warnings
- fixed coredump fw_hash dumping
- kcontrol values are now always stored regardless of stream of interest
is running or not
- kcontrol values are now applied after stream is prepared instead of
ignoring what has been set by user initially
- catpt_pdata instances have been renamed from hsw_ and bdw_ to lpt_ and
wpt_ respectively
- reordered Makefile .o(s) (cosmetic)
Cezary Rojewski (14):
ASoC: Intel: Add catpt base members
ASoC: Intel: catpt: Implement IPC protocol
ASoC: Intel: catpt: Add IPC message handlers
ASoC: Intel: catpt: Define DSP operations
ASoC: Intel: catpt: Firmware loading and context restore
ASoC: Intel: catpt: PCM operations
ASoC: Intel: catpt: Device driver lifecycle
ASoC: Intel: catpt: Event tracing
ASoC: Intel: catpt: Simple sysfs attributes
ASoC: Intel: haswell: Remove haswell-solution specific code
ASoC: Intel: broadwell: Remove haswell-solution specific code
ASoC: Intel: bdw-5650: Remove haswell-solution specific code
ASoC: Intel: bdw-5677: Remove haswell-solution specific code
ASoC: Intel: Select catpt and deprecate haswell
.../ABI/testing/sysfs-bus-pci-devices-catpt | 16 +
sound/soc/intel/Kconfig | 24 +-
sound/soc/intel/Makefile | 2 +-
sound/soc/intel/boards/Kconfig | 8 +-
sound/soc/intel/boards/bdw-rt5650.c | 36 -
sound/soc/intel/boards/bdw-rt5677.c | 33 -
sound/soc/intel/boards/broadwell.c | 33 -
sound/soc/intel/boards/haswell.c | 28 +-
sound/soc/intel/catpt/Makefile | 6 +
sound/soc/intel/catpt/core.h | 188 +++
sound/soc/intel/catpt/device.c | 352 +++++
sound/soc/intel/catpt/dsp.c | 578 ++++++++
sound/soc/intel/catpt/ipc.c | 298 +++++
sound/soc/intel/catpt/loader.c | 671 ++++++++++
sound/soc/intel/catpt/messages.c | 313 +++++
sound/soc/intel/catpt/messages.h | 401 ++++++
sound/soc/intel/catpt/pcm.c | 1175 +++++++++++++++++
sound/soc/intel/catpt/registers.h | 178 +++
sound/soc/intel/catpt/sysfs.c | 55 +
sound/soc/intel/catpt/trace.h | 83 ++
20 files changed, 4335 insertions(+), 143 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-pci-devices-catpt
create mode 100644 sound/soc/intel/catpt/Makefile
create mode 100644 sound/soc/intel/catpt/core.h
create mode 100644 sound/soc/intel/catpt/device.c
create mode 100644 sound/soc/intel/catpt/dsp.c
create mode 100644 sound/soc/intel/catpt/ipc.c
create mode 100644 sound/soc/intel/catpt/loader.c
create mode 100644 sound/soc/intel/catpt/messages.c
create mode 100644 sound/soc/intel/catpt/messages.h
create mode 100644 sound/soc/intel/catpt/pcm.c
create mode 100644 sound/soc/intel/catpt/registers.h
create mode 100644 sound/soc/intel/catpt/sysfs.c
create mode 100644 sound/soc/intel/catpt/trace.h
--
2.17.1
