mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 14:21:47 +00:00
ac96680d22
43935 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Arnd Bergmann
|
ac96680d22 |
ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL
When CONFIG_DEBUG_ALIGN_RODATA is set, we get a link error:
arch/arm/mm/built-in.o:(.data+0x4bc): undefined reference to `__start_rodata_section_aligned'
However, this combination is useless, as XIP_KERNEL implies that all the
RODATA is already marked readonly, so both CONFIG_DEBUG_RODATA and
CONFIG_DEBUG_ALIGN_RODATA (which depends on the other) are not
needed with XIP_KERNEL, and this patches enforces that using a Kconfig
dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
|
||
Jean-Philippe Brucker
|
8d9f491367 |
ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
ARMv6 CPUs do not have virtualisation extensions, but hyp-stub.S is still included into the image to keep it generic. In order to use ARMv7 instructions during HYP initialisation, add -march=armv7-a flag to hyp-stub's build. On an ARMv6 CPU, __hyp_stub_install returns as soon as it detects that the mode isn't HYP, so we will never reach those instructions. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Russell King
|
8ff97fa313 |
ARM: make the physical-relative calculation more obvious
The physical-relative calculation between the XIP text and data sections introduced by the previous patch was far from obvious. Let's simplify it by turning it into a macro which takes the two (virtual) addresses. This allows us to arrange the calculation in a more obvious manner - we can make it two sub-expressions which calculate the physical address for each symbol, and then takes the difference of those physical addresses. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Nicolas Pitre
|
d781145549 |
ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL
When XIP_KERNEL is enabled, the virt to phys address translation for RAM is not the same as the virt to phys address translation for .text. The only way to know where physical RAM is located is to use PLAT_PHYS_OFFSET. The MACRO will be useful for other places where there is a similar problem. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Kevin Cernekee
|
db57f88e4c |
ARM: 8411/1: Add default SPARSEMEM settings
We can still override these settings via mach/memory.h, but let's provide sensible defaults so that SPARSEMEM is available in the multiplatform kernels. Two platforms currently use SECTION_SIZE_BITS < 28, but are expected to work with 28 (albeit slightly less efficiently if not all banks are populated): - mach-rpc: uses 26 bits. Based on mach/hardware.h it looks like this platform puts RAM at 0x1000_0000 - 0x1fff_ffff, and I/O below 0x1000_0000. - mach-sa1100: uses 27 bits. mach/memory.h indicates that RAM occupies the entire range of 0xc000_0000 - 0xdfff_ffff. But Arnd says in that rpc and sa1100 will never have to use the default since they cannot be part of a multiplatform kernel, and that is unlikely to change. Several platforms need MAX_PHYSMEM_BITS >= 36 so we'll pick that as the minimum. Anything higher and we'll fail the SECTIONS_WIDTH + NODES_WIDTH + ZONES_WIDTH test in <linux/mm.h>. Some analysis from Russell King at http://lists.infradead.org/pipermail/linux-arm-kernel/2014-October/298957.html: I think this is fine in as far as it goes - this means we end up with 256 entries in the mem_section array which means it occupies one page, which I think is acceptable overhead. The other thing to be aware of here is the obvious: #if (MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS #error Allocator MAX_ORDER exceeds SECTION_SIZE #endif Which means that with 28 bits of section, that's a maximum allocator order of 16. We appear to allow FORCE_MAX_ZONEORDER to be set up to 64 in the case of shmobile, which doesn't seem like a sensible upper limit - and certainly isn't when sparsemem is enabled. Given this, I think that FORCE_MAX_ZONEORDER's help, and the dependencies probably could do with some improvement to make the issues more transparent. [gregory.0xf0: added notes from Arnd and Russell] Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Masahiro Yamada
|
a34c66357e |
ARM: 8529/1: remove 'i' and 'zi' targets
These two targets were introduced by commit |
||
|
Masahiro Yamada
|
38c81fca9e |
ARM: 8528/1: drop redundant "PHONY += FORCE"
"PHONY += FORCE" is already cared by scripts/Makefile.build, which this file is included from. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
|
Jean-Philippe Brucker
|
e59941b9b3 |
ARM: 8527/1: virt: enable GICv3 system registers
ARMv8 introduces system registers for the Generic Interrupt Controllers CPU and virtual interfaces. When GICv3 is implemented, EL2 needs to allow the kernel to use those registers, by changing the value of ICC_HSRE. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Kees Cook
|
64ac2e74f0 |
ARM: 8502/1: mm: mark section-aligned portion of rodata NX
When rodata is large enough that it crosses a section boundary after the kernel text, mark the rest NX. This is as close to full NX of rodata as we can get without splitting page tables or doing section alignment via CONFIG_DEBUG_ALIGN_RODATA. When the config is: CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_ALIGN_RODATA is not set Before: ---[ Kernel Mapping ]--- 0x80000000-0x80100000 1M RW NX SHD 0x80100000-0x80a00000 9M ro x SHD 0x80a00000-0xa0000000 502M RW NX SHD After: ---[ Kernel Mapping ]--- 0x80000000-0x80100000 1M RW NX SHD 0x80100000-0x80700000 6M ro x SHD 0x80700000-0x80a00000 3M ro NX SHD 0x80a00000-0xa0000000 502M RW NX SHD Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Chris Brandt
|
02afa9a87b |
ARM: 8518/1: Use correct symbols for XIP_KERNEL
For an XIP build, _etext does not represent the end of the binary image that needs to stay mapped into the MODULES_VADDR area. Years ago, data came before text in the memory map. However, now that the order is text/init/data, an XIP_KERNEL needs to map up to the data location in order to keep from cutting off parts of the kernel that are needed. We only map up to the beginning of data because data has already been copied, so there's no reason to keep it around anymore. A new symbol is created to make it clear what it is we are referring to. This fixes the bug where you might lose the end of your kernel area after page table setup is complete. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Ard Biesheuvel
|
31b96cae5c |
ARM: 8515/2: move .vectors and .stubs sections back into the kernel VMA
Commit |
||
|
Ard Biesheuvel
|
b48da55830 |
ARM: 8514/1: remove duplicate definitions of __vectors_start and __stubs_start
Commit
|
||
|
Chris Brandt
|
538bf46948 |
ARM: 8513/1: xip: Move XIP linking to a separate file
When building an XIP kernel, the linker script needs to be much different than a conventional kernel's script. Over time, it's been difficult to maintain both XIP and non-XIP layouts in one linker script. Therefore, this patch separates the two procedures into two completely different files. The new linker script is essentially a straight copy of the current script with all the non-CONFIG_XIP_KERNEL portions removed. Additionally, all CONFIG_XIP_KERNEL portions have been removed from the existing linker script...never to return again. It should be noted that this does not fix any current XIP issues, but rather is the first move in fixing them properly with subsequent patches. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Lorenzo Pieralisi
|
8b6f2499ac |
ARM: 8511/1: ARM64: kernel: PSCI: move PSCI idle management code to drivers/firmware
ARM64 PSCI kernel interfaces that initialize idle states and implement the suspend API to enter them are generic and can be shared with the ARM architecture. To achieve that goal, this patch moves ARM64 PSCI idle management code to drivers/firmware, so that the interface to initialize and enter idle states can actually be shared by ARM and ARM64 arches back-ends. The ARM generic CPUidle implementation also requires the definition of a cpuidle_ops section entry for the kernel to initialize the CPUidle operations at boot based on the enable-method (ie ARM64 has the statically initialized cpu_ops counterparts for that purpose); therefore this patch also adds the required section entry on CONFIG_ARM for PSCI so that the kernel can initialize the PSCI CPUidle back-end when PSCI is the probed enable-method. On ARM64 this patch provides no functional change. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arch/arm64] Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
|
Lorenzo Pieralisi
|
1b9bdf5c16 |
ARM: 8510/1: rework ARM_CPU_SUSPEND dependencies
The code enabled by the ARM_CPU_SUSPEND config option is used by kernel subsystems for purposes that go beyond system suspend so its config entry should be augmented to take more default options into account and avoid forcing its selection to prevent dependencies override. To achieve this goal, this patch reworks the ARM_CPU_SUSPEND config entry and updates its default config value (by adding the BL_SWITCHER option to it) and its dependencies (ARCH_SUSPEND_POSSIBLE), so that the symbol is still selected by default by the subsystems requiring it and at the same time enforcing the dependencies correctly. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Doug Anderson
|
14d3ae2efe |
ARM: 8507/1: dma-mapping: Use DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize alloc
If we know that TLB efficiency will not be an issue when memory is
accessed then it's not terribly important to allocate big chunks of
memory. The whole point of allocating the big chunks was that it would
make TLB usage efficient.
As Marek Szyprowski indicated:
Please note that mapping memory with larger pages significantly
improves performance, especially when IOMMU has a little TLB
cache. This can be easily observed when multimedia devices do
processing of RGB data with 90/270 degree rotation
Image rotation is distinctly an operation that needs to bounce around
through memory, so it makes sense that TLB efficiency is important
there.
Video decoding, on the other hand, is a fairly sequential operation.
During video decoding it's not expected that we'll be jumping all over
memory. Decoding video is also pretty heavy and the TLB misses aren't a
huge deal. Presumably most HW video acceleration users of dma-mapping
will not care about huge pages and will set DMA_ATTR_ALLOC_SINGLE_PAGES.
Allocating big chunks of memory is quite expensive, especially if we're
doing it repeadly and memory is full. In one (out of tree) usage model
it is common that arm_iommu_alloc_attrs() is called 16 times in a row,
each one trying to allocate 4 MB of memory. This is called whenever the
system encounters a new video, which could easily happen while the
memory system is stressed out. In fact, on certain social media
websites that auto-play video and have infinite scrolling, it's quite
common to see not just one of these 16x4MB allocations but 2 or 3 right
after another. Asking the system even to do a small amount of extra
work to give us big chunks in this case is just not a good use of time.
Allocating big chunks of memory is also expensive indirectly. Even if
we ask the system not to do ANY extra work to allocate _our_ memory,
we're still potentially eating up all big chunks in the system.
Presumably there are other users in the system that aren't quite as
flexible and that actually need these big chunks. By eating all the big
chunks we're causing extra work for the rest of the system. We also may
start making other memory allocations fail. While the system may be
robust to such failures (as is the case with dwc2 USB trying to allocate
buffers for Ethernet data and with WiFi trying to allocate buffers for
WiFi data), it is yet another big performance hit.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
||
|
Doug Anderson
|
33298ef6d8 |
ARM: 8505/1: dma-mapping: Optimize allocation
The __iommu_alloc_buffer() is expected to be called to allocate pretty sizeable buffers. Upon simple tests of video I saw it trying to allocate 4,194,304 bytes. The function tries to allocate large chunks in order to optimize IOMMU TLB usage. The current function is very, very slow. One problem is the way it keeps trying and trying to allocate big chunks. Imagine a very fragmented memory that has 4M free but no contiguous pages at all. Further imagine allocating 4M (1024 pages). We'll do the following memory allocations: - For page 1: - Try to allocate order 10 (no retry) - Try to allocate order 9 (no retry) - ... - Try to allocate order 0 (with retry, but not needed) - For page 2: - Try to allocate order 9 (no retry) - Try to allocate order 8 (no retry) - ... - Try to allocate order 0 (with retry, but not needed) - ... - ... Total number of calls to alloc() calls for this case is: sum(int(math.log(i, 2)) + 1 for i in range(1, 1025)) => 9228 The above is obviously worse case, but given how slow alloc can be we really want to try to avoid even somewhat bad cases. I timed the old code with a device under memory pressure and it wasn't hard to see it take more than 120 seconds to allocate 4 megs of memory! (NOTE: testing was done on kernel 3.14, so possibly mainline would behave differently). A second problem is that allocating big chunks under memory pressure when we don't need them is just not a great idea anyway unless we really need them. We can make due pretty well with smaller chunks so it's probably wise to leave bigger chunks for other users once memory pressure is on. Let's adjust the allocation like this: 1. If a big chunk fails, stop trying to hard and bump down to lower order allocations. 2. Don't try useless orders. The whole point of big chunks is to optimize the TLB and it can really only make use of 2M, 1M, 64K and 4K sizes. We'll still tend to eat up a bunch of big chunks, but that might be the right answer for some users. A future patch could possibly add a new DMA_ATTR that would let the caller decide that TLB optimization isn't important and that we should use smaller chunks. Presumably this would be a sane strategy for some callers. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Nicolas Pitre
|
73e592f3bc |
ARM: 8504/1: __arch_xprod_64(): small optimization
The tmp variable is used twice: first to pose as a register containing
a value of zero, and then to provide a temporary register that initially
is zero and get added some value. But somehow gcc decides to split those
two usages in different registers.
Example code:
u64 div64const1000(u64 x)
{
u32 y = 1000;
do_div(x, y);
return x;
}
Result:
div64const1000:
push {r4, r5, r6, r7, lr}
mov lr, #0
mov r6, r0
mov r7, r1
adr r5, .L8
ldrd r4, [r5]
mov r1, lr
umull r2, r3, r4, r6
cmn r2, r4
adcs r3, r3, r5
adc r2, lr, #0
umlal r3, r2, r5, r6
umlal r3, r1, r4, r7
mov r3, #0
adds r2, r1, r2
adc r3, r3, #0
umlal r2, r3, r5, r7
lsr r0, r2, #9
lsr r1, r3, #9
orr r0, r0, r3, lsl #23
pop {r4, r5, r6, r7, pc}
.align 3
.L8:
.word -1924145349
.word -2095944041
Full kernel build size:
text data bss dec hex filename
13663814 1553940 351368 15569122 ed90e2 vmlinux
Here the two instances of 'tmp' are assigned to r1 and lr.
To avoid that, let's mark the first 'tmp' usage in __arch_xprod_64()
with a "+r" constraint even if the register is not written to, so to
create a dependency for the second usage with the effect of enforcing
a single temporary register throughout.
Result:
div64const1000:
push {r4, r5, r6, r7}
movs r3, #0
adr r5, .L8
ldrd r4, [r5]
umull r6, r7, r4, r0
cmn r6, r4
adcs r7, r7, r5
adc r6, r3, #0
umlal r7, r6, r5, r0
umlal r7, r3, r4, r1
mov r7, #0
adds r6, r3, r6
adc r7, r7, #0
umlal r6, r7, r5, r1
lsr r0, r6, #9
lsr r1, r7, #9
orr r0, r0, r7, lsl #23
pop {r4, r5, r6, r7}
bx lr
.align 3
.L8:
.word -1924145349
.word -2095944041
text data bss dec hex filename
13663438 1553940 351368 15568746 ed8f6a vmlinux
This time 'tmp' is assigned to r3 and used throughout. However, by being
assigned to r3, that blocks usage of the r2-r3 double register slot for
64-bit values, forcing more registers to be spilled on the stack. Let's
try to help it by forcing 'tmp' to the caller-saved ip register.
Result:
div64const1000:
stmfd sp!, {r4, r5}
mov ip, #0
adr r5, .L8
ldrd r4, [r5]
umull r2, r3, r4, r0
cmn r2, r4
adcs r3, r3, r5
adc r2, ip, #0
umlal r3, r2, r5, r0
umlal r3, ip, r4, r1
mov r3, #0
adds r2, ip, r2
adc r3, r3, #0
umlal r2, r3, r5, r1
mov r0, r2, lsr #9
mov r1, r3, lsr #9
orr r0, r0, r3, asl #23
ldmfd sp!, {r4, r5}
bx lr
.align 3
.L8:
.word -1924145349
.word -2095944041
text data bss dec hex filename
13662838 1553940 351368 15568146 ed8d12 vmlinux
We could make the code marginally smaller yet by forcing 'tmp' to lr
instead, but that would have a negative inpact on branch prediction for
which "bx lr" is optimal.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
||
|
Kees Cook
|
25362dc496 |
ARM: 8501/1: mm: flip priority of CONFIG_DEBUG_RODATA
The use of CONFIG_DEBUG_RODATA is generally seen as an essential part of kernel self-protection: http://www.openwall.com/lists/kernel-hardening/2015/11/30/13 Additionally, its name has grown to mean things beyond just rodata. To get ARM closer to this, we ought to rearrange the names of the configs that control how the kernel protects its memory. What was called CONFIG_ARM_KERNMEM_PERMS is realy doing the work that other architectures call CONFIG_DEBUG_RODATA. This redefines CONFIG_DEBUG_RODATA to actually do the bulk of the ROing (and NXing). In the place of the old CONFIG_DEBUG_RODATA, use CONFIG_DEBUG_ALIGN_RODATA, since that's what the option does: adds section alignment for making rodata explicitly NX, as arm does not split the page tables like arm64 does without _ALIGN_RODATA. Also adds human readable names to the sections so I could more easily debug my typos, and makes CONFIG_DEBUG_RODATA default "y" for CPU_V7. Results in /sys/kernel/debug/kernel_page_tables for each config state: # CONFIG_DEBUG_RODATA is not set # CONFIG_DEBUG_ALIGN_RODATA is not set ---[ Kernel Mapping ]--- 0x80000000-0x80900000 9M RW x SHD 0x80900000-0xa0000000 503M RW NX SHD CONFIG_DEBUG_RODATA=y CONFIG_DEBUG_ALIGN_RODATA=y ---[ Kernel Mapping ]--- 0x80000000-0x80100000 1M RW NX SHD 0x80100000-0x80700000 6M ro x SHD 0x80700000-0x80a00000 3M ro NX SHD 0x80a00000-0xa0000000 502M RW NX SHD CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_ALIGN_RODATA is not set ---[ Kernel Mapping ]--- 0x80000000-0x80100000 1M RW NX SHD 0x80100000-0x80a00000 9M ro x SHD 0x80a00000-0xa0000000 502M RW NX SHD Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
|
Russell King
|
4138323eac |
ARM: use virt_to_idmap() for soft_restart()
Code run via soft_restart() is run with the MMU disabled, so we need to pass the identity map physical address rather than the address obtained from virt_to_phys(). Therefore, replace virt_to_phys() with virt_to_idmap() for all callers of soft_restart(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
|
Russell King
|
2841029393 |
ARM: make virt_to_idmap() return unsigned long
Make virt_to_idmap() return an unsigned long rather than phys_addr_t. Returning phys_addr_t here makes no sense, because the definition of virt_to_idmap() is that it shall return a physical address which maps identically with the virtual address. Since virtual addresses are limited to 32-bit, identity mapped physical addresses are as well. Almost all users already had an implicit narrowing cast to unsigned long so let's make this official and part of this interface. Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Andiii
|
9023cc8268 |
ARM: 8499/1: irq: l2c: do not print error in case of missing l2c from
arm: irq: l2c: do not print error in case of missing l2c from dtb In some architectures the L2 cache controller is integrated in the processor's block itself and it doesn't use any external cache controller. This means that an entry in the board's dtb related to the l2c is not necessary. Distinguish between error codes and do not print anything in case l2x0_of_init() doesn't find any L2C DTB entry and returns -ENODEV. This patch mutes the following error message: L2C: failed to init: -19 on boards like odroid-xu4, cortex A7/A15, which don't have external cache controller. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Juri Lelli
|
d78e13a8a8 |
ARM: 8497/1: initialize cpu_scale to its default
Instead of looping through all cpus calling set_capacity_scale, we can initialise cpu_scale per-cpu variables to SCHED_CAPACITY_SCALE with their definition. Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
|
Russell King
|
f19768ce0e |
ARM: orion: implement ARM delay timer
Implement an ARM delay timer to be used for udelay() on orion legacy platforms. This allows us to skip the delay loop calibration at boot. It also means that udelay() will be unaffected by CPU frequency changes when cpufreq is enabled on these platforms. Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
Linus Torvalds
|
20c759ca98 |
Merge branch 'akpm' (patches from Andrew)
Merge small final update from Andrew Morton: - DAX feature work: add fsync/msync support - kfree cleanup, MAINTAINERS update * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: return arch/sh to maintained state, with new maintainers tree wide: use kvfree() than conditional kfree()/vfree() dax: never rely on bh.b_dev being set by get_block() xfs: call dax_pfn_mkwrite() for DAX fsync/msync ext4: call dax_pfn_mkwrite() for DAX fsync/msync ext2: call dax_pfn_mkwrite() for DAX fsync/msync dax: add support for fsync/sync mm: add find_get_entries_tag() dax: support dirty DAX entries in radix tree pmem: add wb_cache_pmem() to the PMEM API dax: fix conversion of holes to PMDs dax: fix NULL pointer dereference in __dax_dbg() |
||
|
Linus Torvalds
|
79d245327f |
ARM: SoC support for Tegra platforms for v4.5
Here's a single-SoC topic branch that we've staged separately. Mainly because it was hard to sort the branch contents in a way that fit our existing branches due to some refactorings. The code has been in -next for quite a while, but we staged it in arm-soc a bit late, which is why we've kept it separate from the other updates and are sending it separately here. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWoqsGAAoJEIwa5zzehBx3/F4QAJo4FEU+KTOhUggDV+KPn9ZD Re1SAKTpKo9elMdDdTZZObHYPf+RXqun50C4pQiSVfyDm9syZaxtWjjZvshwsATq 178fNN+0C/7aenj8Zpq/NrLwBl1N51cSdc1ii3TcN/OA5XDgpmGJTdqMziDiXAkd Nt847qSEhIvAfOtcZR2drk2wBKGCTA/NpGU3HCryPAlO7RnAbJY4Ywj0bU01Lc9y bSJYh1SPaa1PdDCBJjtbk6L8iGl39K5oy0e6ehECEviLBVtWIL0zqh101XGbPVtv vtpVJ40NciiHknCBEiJkYiY9b7BNZYMeuwLarqk7TxyW4Vm5Rl5CFkEot0X/b70J XSxca6KGLzSgmCYDzJtLgtmyBUDoGqNwiPnNVIjrGIt9uOlWeHGb7TUKjBZaJr7G nXiKKU17zhb28hEo8JjIGcuFcOGlwlBhoOKhOYePiXX/iA03M8SEZg3XXyYMiaVz j9PcfOQptc7CyCAyiUQW36cZc1vQlnNxpiZstF0QsJ+Poe1kPlJIVpOarrfFdvh5 wJrS4L5YoIzb5robsNLNJ6XXiRnqvxgO6dEdA3RoI1bMaFsXVRCb03EoxVYqS4RF o+4h0KYQ8gPmAhA/ii/IDHps51TCCDOolAyWLfmYlqXu76IjOlC1LTYxi8RAGZNL xExyC0A3YDfONv6mx07R =LG3u -----END PGP SIGNATURE----- Merge tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC support for Tegra platforms from Olof Johansson: "Here's a single-SoC topic branch that we've staged separately. Mainly because it was hard to sort the branch contents in a way that fit our existing branches due to some refactorings. The code has been in -next for quite a while, but we staged it in arm-soc a bit late, which is why we've kept it separate from the other updates and are sending it separately here" * tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support arm64: tegra: Add NVIDIA P2597 I/O board support arm64: tegra: Add NVIDIA Jetson TX1 support arm64: tegra: Add NVIDIA P2571 board support arm64: tegra: Add NVIDIA P2371 board support arm64: tegra: Add NVIDIA P2595 I/O board support arm64: tegra: Add NVIDIA P2530 main board support arm64: tegra: Add Tegra210 support arm64: tegra: Add NVIDIA Tegra132 Norrin support arm64: tegra: Add Tegra132 support ARM: tegra: select USB_ULPI from EHCI rather than platform ARM: tegra: Ensure entire dcache is flushed on entering LP0/1 amba: Hide TEGRA_AHB symbol soc/tegra: Add Tegra210 support soc/tegra: Provide per-SoC Kconfig symbols |
||
|
Linus Torvalds
|
1b8ee1ec41 |
ARM: SoC fixes for v4.5 merge window
A few fixes for fallout that we didn't catch in time in -next, or smaller warning fixes that have been discovered since. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWolruAAoJEIwa5zzehBx3wIsQAJzOv9kJIw7c+Uh8Wu2CkEmv IJMiL8n7PvtLq/USOYKKIqf6KeGjedMNM1aFSRuDQ0HqdBB4ysyv4Go6CMUlxSv7 fbr5/AmZlrgBKZwvjh2SzehvvhuaWuDMzo+1lDm2cqQ8u/kmEQPcDRG/eTDDV5nf Ym/dDCh8PXHTFmuad2a3qznNod5kHNE+agOgjTYZxZvA67Ys8HGoaXlYtJijqv5p KwcNspT0vn7Tf22XrEsrkR9bgfyNHcdiB+qSJBYWqH00Q0ew6zfLI1FWPUNPLvg6 HgoNIxBIaNdPS9v/EH70uhvIeWGTH0Yz/YiNzm3lp+rIWutdDPnKW0DnxiIACGis e9b4f24OfPWeveh+KWdVgyRYk/hNvO9umuJNyM6G2PP9fWRldqZXfR0vVKY6Wfzr WYprBAbY/LvuZBsyser3UNokD2pxaLGCTrkRiH/Y/hQuhfu8HjDmetoKI5Vz8Irn 2/rAWL0yidpblPd6hZAbz0b/Z2SCRU+eRF6Q10ovr9Ug3AY8oEKrlt6emcbDoFie 1geHAJT+HGejR4Hl9rEixZQqJ0o2BtyyETqZpM1hY6eOE7uz/bw59kfjLLCCHcr7 mZx9DUjAH5trkvPVlj/WUXPoryW9Ra66eREXsIwajBQb53ww6gdr/VAYCYFDx/VF V10Vs46iT8lLoqY/YsT/ =PRjJ -----END PGP SIGNATURE----- Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for fallout that we didn't catch in time in -next, or smaller warning fixes that have been discovered since" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: qcom/spm: shut up uninitialized variable warning ARM: realview: fix device tree build ARM: debug-ll: fix BCM63xx entry for multiplatform ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz |
||
Tetsuo Handa
|
1d5cfdb076 |
tree wide: use kvfree() than conditional kfree()/vfree()
There are many locations that do
if (memory_was_allocated_by_vmalloc)
vfree(ptr);
else
kfree(ptr);
but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory
using is_vmalloc_addr(). Unless callers have special reasons, we can
replace this branch with kvfree(). Please check and reply if you found
problems.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Boris Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Olof Johansson
|
53c517a837 |
Renesas ARM Based SoC Fixes for v4.5
Correct extal1 frequency of armadillo800eva board -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWoESmAAoJENfPZGlqN0++RsMP/1q9XvQYUc6xF0LqQR8jLx3N FGt/uHiWEzkprfMNRAimX3l6UDv+ae44S58kyCjfOEwz9H58JtFnhlg+Ofq8+ibu UklF/niPl4UvjPaNaeIZIoBlt6CdjnO53nzCTjCsT7kGv1lYHE+2UCwFiuQtQdSB pH0frq+kDlSpSumiMlsmwajVqf/5kWjoRvhLTztKeB6soxlVFkX3FoKURnCQhaXJ J7agAC8hK8vBwL3xUXCTL9ozBxlkgCY7uwenDr97mCQfl5aEvtOcXhLxafhetuKM ZvgD1BO2u4lAQDoEFEw3X4T9To4R2PNvgNslhTuMLBM3EUa4kvZTykM6PKitE506 cTHwCzvI2JnXK6h7ySLQWVDwG8/gGAjCbvt5ZXztOrb7Nqu3kr5hizcbHKBYCWfu 7WOxqFbBj2j+D4TqzFh8B6si4IQG8ZPOCa9gmtpz1FeE6Yg5/gM3cV+1DP6/VxJ+ C5OqjNUPK8DKOu0ZTpR1DqsDtIfJ/O+psk6AlLigg4GzkIuTZQ8nDVOTaUtnk2G8 MTF2IWgd0x5659mhvDOCj3F4IsfjHS2zuczAnU4eCDcHLuplAguOrtG/NnP+egTI nGlsF+DFXkOXhz/vkvS7AgJwAhAm2KXgtLCA9LvNxfz9youZKc/CbxwDVPV/cq9F RSvr3ktkSYro+q8Wx6ch =YGew -----END PGP SIGNATURE----- Merge tag 'renesas-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v4.5 Correct extal1 frequency of armadillo800eva board * tag 'renesas-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Linus Torvalds
|
eae21770b4 |
Merge branch 'akpm' (patches from Andrew)
Merge third patch-bomb from Andrew Morton:
"I'm pretty much done for -rc1 now:
- the rest of MM, basically
- lib/ updates
- checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit
- cpu_mask simplifications
- kexec, rapidio, MAINTAINERS etc, etc.
- more dma-mapping cleanups/simplifications from hch"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
MAINTAINERS: add/fix git URLs for various subsystems
mm: memcontrol: add "sock" to cgroup2 memory.stat
mm: memcontrol: basic memory statistics in cgroup2 memory controller
mm: memcontrol: do not uncharge old page in page cache replacement
Documentation: cgroup: add memory.swap.{current,max} description
mm: free swap cache aggressively if memcg swap is full
mm: vmscan: do not scan anon pages if memcg swap limit is hit
swap.h: move memcg related stuff to the end of the file
mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
mm: vmscan: pass memcg to get_scan_count()
mm: memcontrol: charge swap to cgroup2
mm: memcontrol: clean up alloc, online, offline, free functions
mm: memcontrol: flatten struct cg_proto
mm: memcontrol: rein in the CONFIG space madness
net: drop tcp_memcontrol.c
mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM
mm: memcontrol: allow to disable kmem accounting for cgroup2
mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
mm: memcontrol: move kmem accounting code to CONFIG_MEMCG
mm: memcontrol: separate kmem code from legacy tcp accounting code
...
|
||
|
Linus Torvalds
|
d43421565b |
PCI changes for the v4.5 merge window:
Enumeration
Simplify config space size computation (Bjorn Helgaas)
Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
Support PCIe devices with short cfg_size (Jason S. McMullan)
Add Netronome vendor and device IDs (Jason S. McMullan)
Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
Add Netronome NFP4000 PF device ID (Simon Horman)
Limit config space size for Netronome NFP4000 (Simon Horman)
Print warnings for all invalid expansion ROM headers (Vladis Dronov)
Resource management
Fix minimum allocation address overwrite (Christoph Biedl)
PCI device hotplug
acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
shpchp: Constify hpc_ops structure (Julia Lawall)
ibmphp: Remove unneeded NULL test (Julia Lawall)
Power management
Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)
Virtualization
Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)
MSI
Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
Initialize MSI capability for all architectures (Guilherme G. Piccoli)
Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)
ARM Versatile host bridge driver
Remove unused pci_sys_data structures (Lorenzo Pieralisi)
Broadcom iProc host bridge driver
Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
Do not use 0x in front of %pap (Dmitry V. Krivenok)
Update iProc PCIe device tree binding (Ray Jui)
Add PAXC interface support (Ray Jui)
Add iProc PCIe MSI device tree binding (Ray Jui)
Add iProc PCIe MSI support (Ray Jui)
Freescale i.MX6 host bridge driver
Use gpio_set_value_cansleep() (Fabio Estevam)
Add support for active-low reset GPIO (Petr Štetiar)
HiSilicon host bridge driver
Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)
Intel VMD host bridge driver
Export irq_domain_set_info() for module use (Keith Busch)
x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
Use 32 bit PCI domain numbers (Keith Busch)
Add driver for Intel Volume Management Device (VMD) (Keith Busch)
Qualcomm host bridge driver
Document PCIe devicetree bindings (Stanimir Varbanov)
Add Qualcomm PCIe controller driver (Stanimir Varbanov)
dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)
Renesas R-Car host bridge driver
Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
Allow DT to override default window settings (Phil Edworthy)
Convert to DT resource parsing API (Phil Edworthy)
Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
Add runtime PM support to pcie-rcar (Phil Edworthy)
Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)
Synopsys DesignWare host bridge driver
Simplify control flow (Bjorn Helgaas)
Make config accessor override checking symmetric (Bjorn Helgaas)
Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)
Miscellaneous
Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
Fix all whitespace issues (Bogicevic Sasa)
x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
Use to_pci_dev() instead of open-coding it (Geliang Tang)
Use kobj_to_dev() instead of open-coding it (Geliang Tang)
Use list_for_each_entry() to simplify code (Geliang Tang)
Fix typos in <linux/msi.h> (Thomas Petazzoni)
x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z9mQ
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for the v4.5 merge window:
Enumeration:
- Simplify config space size computation (Bjorn Helgaas)
- Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
- Support PCIe devices with short cfg_size (Jason S. McMullan)
- Add Netronome vendor and device IDs (Jason S. McMullan)
- Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
- Add Netronome NFP4000 PF device ID (Simon Horman)
- Limit config space size for Netronome NFP4000 (Simon Horman)
- Print warnings for all invalid expansion ROM headers (Vladis Dronov)
Resource management:
- Fix minimum allocation address overwrite (Christoph Biedl)
PCI device hotplug:
- acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
- pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
- shpchp: Constify hpc_ops structure (Julia Lawall)
- ibmphp: Remove unneeded NULL test (Julia Lawall)
Power management:
- Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)
Virtualization
- Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)
MSI:
- Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
- Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
- Initialize MSI capability for all architectures (Guilherme G. Piccoli)
- Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)
ARM Versatile host bridge driver:
- Remove unused pci_sys_data structures (Lorenzo Pieralisi)
Broadcom iProc host bridge driver:
- Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
- Do not use 0x in front of %pap (Dmitry V. Krivenok)
- Update iProc PCIe device tree binding (Ray Jui)
- Add PAXC interface support (Ray Jui)
- Add iProc PCIe MSI device tree binding (Ray Jui)
- Add iProc PCIe MSI support (Ray Jui)
Freescale i.MX6 host bridge driver:
- Use gpio_set_value_cansleep() (Fabio Estevam)
- Add support for active-low reset GPIO (Petr Štetiar)
HiSilicon host bridge driver:
- Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)
Intel VMD host bridge driver:
- Export irq_domain_set_info() for module use (Keith Busch)
- x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
- Use 32 bit PCI domain numbers (Keith Busch)
- Add driver for Intel Volume Management Device (VMD) (Keith Busch)
Qualcomm host bridge driver:
- Document PCIe devicetree bindings (Stanimir Varbanov)
- Add Qualcomm PCIe controller driver (Stanimir Varbanov)
- dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
- dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)
Renesas R-Car host bridge driver:
- Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
- Allow DT to override default window settings (Phil Edworthy)
- Convert to DT resource parsing API (Phil Edworthy)
- Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
- Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
- Add runtime PM support to pcie-rcar (Phil Edworthy)
- Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
- Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
- Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)
Synopsys DesignWare host bridge driver:
- Simplify control flow (Bjorn Helgaas)
- Make config accessor override checking symmetric (Bjorn Helgaas)
- Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)
Miscellaneous:
- Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
- Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
- Fix all whitespace issues (Bogicevic Sasa)
- x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
- Use to_pci_dev() instead of open-coding it (Geliang Tang)
- Use kobj_to_dev() instead of open-coding it (Geliang Tang)
- Use list_for_each_entry() to simplify code (Geliang Tang)
- Fix typos in <linux/msi.h> (Thomas Petazzoni)
- x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)"
* tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183
PCI: Limit config space size for Netronome NFP4000
PCI: Add Netronome NFP4000 PF device ID
x86/PCI: Add driver for Intel Volume Management Device (VMD)
PCI/AER: Use 32 bit PCI domain numbers
x86/PCI: Allow DMA ops specific to a PCI domain
irqdomain: Export irq_domain_set_info() for module use
PCI: host: Add of_pci_get_host_bridge_resources() stub
genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains
PCI: rcar: Add Gen2 PHY setup to pcie-rcar
PCI: rcar: Add runtime PM support to pcie-rcar
PCI: designware: Make config accessor override checking symmetric
PCI: ibmphp: Remove unneeded NULL test
ARM: dts: ifc6410: enable PCIe DT node for this board
ARM: dts: apq8064: add PCIe devicetree node
PCI: hotplug: Use list_for_each_entry() to simplify code
PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers
PCI: Avoid iterating through memory outside the resource window
PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot
...
|
||
Linus Walleij
|
6551b8c9b7 |
ARM: realview: fix device tree build
As it happens, two obj-$(CONFIG_FOO) += foo.o variables are above obj-y := core.o, which doesn't work: the += directives need to add something to the build and doesn't work if obj-y is not set first, so move the obj-y to be on top and everything builds nicely again. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
30f05309bd |
More power management and ACPI updates for v4.5-rc1
- Modify the driver core and the USB subsystem to allow USB devices
to stay suspended over system suspend/resume cycles if they have
been runtime-suspended already beforehand and fix some bugs on
top of these changes (Tomeu Vizoso, Rafael Wysocki).
- Update ACPICA to upstream revision 20160108, including updates
of the ACPICA's copyright notices, a code fixup resulting from
a regression fix that was necessary in the upstream code only
(the regression fixed by it has never been present in Linux)
and a compiler warning fix (Bob Moore, Lv Zheng).
- Fix a recent regression in the cpuidle menu governor that broke
it on practically all architectures other than x86 and make a
couple of optimizations on top of that fix (Rafael Wysocki).
- Clean up the selection of cpuidle governors depending on whether
or not the kernel is configured for tickless systems (Jean Delvare).
- Revert a recent commit that introduced a regression in the ACPI
backlight driver, address the problem it attempted to fix in a
different way and revert one more cosmetic change depending on
the problematic commit (Hans de Goede).
- Add two more ACPI backlight quirks (Hans de Goede).
- Fix a few minor problems in the core devfreq code, clean it up
a bit and update the MAINTAINERS information related to it
(Chanwoo Choi, MyungJoo Ham).
- Improve an error message in the ACPI fan driver (Andy Lutomirski).
- Fix a recent build regression in the cpupower tool (Shreyas Prabhu).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=bKJ9
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"This includes fixes on top of the previous batch of PM+ACPI updates
and some new material as well.
From the new material perspective the most significant are the driver
core changes that should allow USB devices to stay suspended over
system suspend/resume cycles if they have been runtime-suspended
already beforehand. Apart from that, ACPICA is updated to upstream
revision 20160108 (cosmetic mostly, but including one fixup on top of
the previous ACPICA update) and there are some devfreq updates the
didn't make it before (due to timing).
A few recent regressions are fixed, most importantly in the cpuidle
menu governor and in the ACPI backlight driver and some x86 platform
drivers depending on it.
Some more bugs are fixed and cleanups are made on top of that.
Specifics:
- Modify the driver core and the USB subsystem to allow USB devices
to stay suspended over system suspend/resume cycles if they have
been runtime-suspended already beforehand and fix some bugs on top
of these changes (Tomeu Vizoso, Rafael Wysocki).
- Update ACPICA to upstream revision 20160108, including updates of
the ACPICA's copyright notices, a code fixup resulting from a
regression fix that was necessary in the upstream code only (the
regression fixed by it has never been present in Linux) and a
compiler warning fix (Bob Moore, Lv Zheng).
- Fix a recent regression in the cpuidle menu governor that broke it
on practically all architectures other than x86 and make a couple
of optimizations on top of that fix (Rafael Wysocki).
- Clean up the selection of cpuidle governors depending on whether or
not the kernel is configured for tickless systems (Jean Delvare).
- Revert a recent commit that introduced a regression in the ACPI
backlight driver, address the problem it attempted to fix in a
different way and revert one more cosmetic change depending on the
problematic commit (Hans de Goede).
- Add two more ACPI backlight quirks (Hans de Goede).
- Fix a few minor problems in the core devfreq code, clean it up a
bit and update the MAINTAINERS information related to it (Chanwoo
Choi, MyungJoo Ham).
- Improve an error message in the ACPI fan driver (Andy Lutomirski).
- Fix a recent build regression in the cpupower tool (Shreyas
Prabhu)"
* tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
cpuidle: menu: Avoid pointless checks in menu_select()
sched / idle: Drop default_idle_call() fallback from call_cpuidle()
cpupower: Fix build error in cpufreq-info
cpuidle: Don't enable all governors by default
cpuidle: Default to ladder governor on ticking systems
time: nohz: Expose tick_nohz_enabled
ACPICA: Update version to 20160108
ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t'
ACPICA: Additional 2016 copyright changes
ACPICA: Reduce regression fix divergence from upstream ACPICA
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()"
ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit
ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses()
ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses"
ACPI / fan: Improve acpi_device_update_power error message
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0
MAINTAINERS: Add devfreq-event entry
MAINTAINERS: Add missing git repository and directory for devfreq
...
|
||
|
Linus Torvalds
|
f9cd69fe5e |
ARM: SoC defconfig updates for v4.5
As usual, a bunch of commits, mostly adding drivers and other options to defconfigs because it makes sense to have them enabled on various development or product boards. Too much to enumerate each here. There's an introduction of a pxa_defconfig, since PXA finally will allow building a shared kernel for all boards. With this, we can hopefully remove a bunch of individual defconfigs down the road but it requires a bit of real life testing and transition period. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWnsEkAAoJEIwa5zzehBx33lcQAItHXIplC5tC3EjnJLY2lW8j bZ38mWVU0I5jT688hlCw7eOCajO30sG0RM4vqlG1PpvL6mbiM3kX6s0LBUVQa6J0 bCHLkzVkXBXO3VJFAHcY821XdBpnINgmAt/AEElSDrBK2wi/kb6dvP0ClYe/4zhB B44P/pWtYpn09KyGkPdIanSGPG0ikvP03i0mKRxlFwyB2RSJiFzsVlNtUYQMgDMp SOsN3fO2AzZCWCNF+gz7/ekWzo7hGlXNU3WeIIWIs3GL6FTi9p//LeP7w9oTxGbv d6hId6TGp7rYCA0XjwJtRK1kkQGVLxCltR/UDBSCjc4sS4Xh8ME35TDWo1Z/yHKr UtlKI2VHMSkxkk1DChbUYS8ojBOmgVApvG4BTYm0DICvW7zeGJqtOD/zM5CgKJWA AfVAL2c9N47YyOYcehDucig+yuxf4+RV92hEO+K84MWL1MYi5o/J3BJqmQ7dtfBT MYLLgcpzsUPC9R43mUs69/zojBFCPPPIz6CBn29m9+BAkX887jvInln7fKK0TaG8 V9Y0eHmgEHvshomYrJwkFKSIq7NhU0M+ZCGvBNP5a1wDNEw/Kc0/Sz1QVHrbN+P1 t9jZZKoq8s2WvEtVpghjbQAxCf/tUFx5zSfWf4MbuduaTtM119EkaSoROWvjIaId Aj57uYO8cm7/bGNEMQ3k =YsCa -----END PGP SIGNATURE----- Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Olof Johansson: "As usual, a bunch of commits, mostly adding drivers and other options to defconfigs because it makes sense to have them enabled on various development or product boards. Too much to enumerate each here. There's an introduction of a pxa_defconfig, since PXA finally will allow building a shared kernel for all boards. With this, we can hopefully remove a bunch of individual defconfigs down the road but it requires a bit of real life testing and transition period" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits) ARM: Add CONFIG_DEPRECATED_PARAM_STRUCT to netwinder_defconfig ARM: multi_v7_defconfig: Add rockchip audio support arm: multi_v7_defconfig: Add virtio drivers ARM: zx_defconfig: remove CONFIG_MMC_DW_IDMAC ARM: versatile: enable the right LEDs ARM: pxa: add defconfig covering all the boards ARM: versatile: select some defaults in defconfig ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3 ARM: bcm2835: enable auxiliary spi driver in defconfig ARM: bcm2835: enable all bcm2835-relevant in defconfig ARM: default to multi_v7_defconfig ARM: multi_v7_defconfig: enable rk808 clkout module ARM: multi_v7_defconfig: enable rockchip crypto module ARM: multi_v7_defconfig: enable Rockchip io-domain driver ARM: multi_v7_defconfig: Enable generic SoC internal OMAP regulators ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218 ARM: multi_v7_defconfig: enable TPS65217 regulator ARM: realview: select apropriate targets ARM: defconfig: qcom: Enable SSBI drivers ARM: defconfig: Update qcom_defconfig ... |
||
|
Linus Torvalds
|
6d1c244803 |
ARM: DT updates for v4.5
As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWnr6fAAoJEIwa5zzehBx3p+gP+wYLUqXjCYgyu6oJPxJbWghj gPc4QJmhVlAWTqvE7Ut7RumWzGa7nUEH2QF9tiCLbDAw8727HJXhRHknFwaCsX45 BsvFQaKY99ClfUhoSI9GRa8e2jEArjzEPqkynHW/8FM20qWaj/Z8DDfixG75gR8u onrMw6kprNGwmyQwqu5zLDXhUBCQIs1xRRSabUjV1P5420dbBaGgtmQrdj7k+JDt wo9SKiG6d9CSYil3r7BC+0JwzbKNBxRGs2vv1BJOfbZ3Lj+uC0vj1AxoF/p7dOHy ohuvt7UwwtoUzzFMcMUo7E8qxl9u6bbnPDlUoRF7DVVi5SQoeZd8BOZXOdLRN2OQ qtgsmziDxtvh7Ydj6i89D69x7+GurAFcP8Aturprc5Zd5lO70PAYBD379IhIZ8y1 MVJltIEeuUZo7BaVBCHWQY9jJRtI3bAU6JdFPrFROsuo810IYd72Wbb1ZCfF7SV7 nBRvV7e71VQxb48c3p8Et5FntHuXfUlhkMrQ7Cb+2ugB/diGgZB9NfrZbP3Azv7f A5Ey9tNHaOCUxzYDCw80jTa7OwVWNJf2kOT1yikASk3vODKLv4E5YQ2DULnObWG7 iRmLYuuGka4sMs0ZjpV3kaqs+8rWu08x2rEr5X0wfU+DalIzUWA2oDKSgPLJoacV gXKP039CIxQAiottcppA =XDLa -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ... |
||
|
Linus Torvalds
|
1305eda751 |
ARM: SoC platform updates for v4.5
Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWnrvIAAoJEIwa5zzehBx3j0oP/i1WKGraSHS/w29ms4vfisFW bteUAsgh9aG8GCp/kigjmdMbWMdCRQfXp4D+o+SSr2DcM0q2iZzXV2WTeQ6YPAJM Fn431nuPn37ULd9PXdEhgiTDfDmVpvZrHeIQpDxC/TccRj4hkbxkMn6+s5WGkJLR DAr3h2mjKgulKZ4Wlj30rOxTDO9kVqTTIxjZXhbmMxepgMihSpvRGMXbKjxVHDSe NdCoIlfjhu6trr9d39b3POQVDCtrr82WvgrlfrhZZW6YXq7dIb3hhM1RldHCM+a7 mnNDMoVDCEjLM7WLkgoOzsX4j+MyCbrsBY9DV9Zs7MtntWGcD+oH0M+ZLjrtlPef vebi+yBh/JH9fyrOiusSzbRaimy5o/NO/tYFgEAh/zk6GhwJwBYBvM1nexnfSHhv LMY+nSrgZYdN9qHurwjaBmAAmp8u0XZIz/MLQA4WpoqqoAcV2X3gtMcQMdL+nio5 sUlE60/BcXjHqp/gt3MblxZy2WVzklCuqprOSYxhPwFDx7i9SKb9erSyzEkmzQDP UU+8Bory8egR537GaxM+izq9LQ3HLpWnyGPXSGx1s0vzNpZTsYC49eFK44vJRtLK QOlFG1VAupFP5S7kDneXJ8KoWcOwG3OccPfPTvyaC8SIezjXrKDgISV2mHOghYlk uNYO2fcyBoUX9jG3dUy8 =FP4V -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: tango: Fix UP build issues ARM: tango: pass ARM arch level for smc.S ARM: bcm2835: Add Kconfig support for bcm2836 ARM: OMAP2+: Add support for dm814x and dra62x usb ARM: OMAP2+: Add mmc hwmod entries for dm814x ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx ARM: OMAP2+: Fix SoC detection for dra62x j5-eco ARM: tango4: Initial platform support ARM: bcm2835: Add a compat string for bcm2836 machine probe dt-bindings: Add root properties for Raspberry Pi 2 ARM: imx: select SRC for i.MX7 ARM: uniphier: select PINCTRL ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: rockchip: enable support for RK3228 SoCs ARM: rockchip: use const and __initconst for rk3036 smp_operations ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER ARM: BCM: Add SMP support for Broadcom 4708 ARM: BCM: Add SMP support for Broadcom NSP ARM: BCM: Clean up SMP support for Broadcom Kona ... |
||
|
Linus Torvalds
|
6b5a12dbca |
ARM: SoC multiplatform code changes for v4.5
This branch is the culmination of 5 years of effort to bring the ARMv6
and ARMv7 platforms together such that they can all be enabled and
boot the same kernel. It has been a tremendous amount of cleanup and
refactoring by a huge number of people, and creation of several new
(and major) subsystems to better abstract out all the platform details
in an appropriate manner.
The bulk of this branch is a large patchset from Arnd that brings several
of the more minor and older platforms we have closer to multiplatform
support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview
Much of this is moving around header files from old mach directories,
but there are also some cleanup patches of debug_ll (lowlevel debug
per-platform options) and other parts.
Linus Walleij also has some patchs to clean up the older ARM Realview
platforms by finally introducing DT support, and Rob Herring has some
for ARM Versatile which is now DT-only. Both of these platforms are
now multiplatform.
Finally, a couple of patches from Russell for Dove PMU, and a fix from
Valentin Rothberg for Exynos ADC, which were rebased on top of the
series to avoid conflicts.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z1AW
-----END PGP SIGNATURE-----
Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC multiplatform code updates from Arnd Bergmann:
"This branch is the culmination of 5 years of effort to bring the ARMv6
and ARMv7 platforms together such that they can all be enabled and
boot the same kernel. It has been a tremendous amount of cleanup and
refactoring by a huge number of people, and creation of several new
(and major) subsystems to better abstract out all the platform details
in an appropriate manner.
The bulk of this branch is a large patchset from Arnd that brings
several of the more minor and older platforms we have closer to
multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0
and realview Much of this is moving around header files from old mach
directories, but there are also some cleanup patches of debug_ll
(lowlevel debug per-platform options) and other parts.
Linus Walleij also has some patchs to clean up the older ARM Realview
platforms by finally introducing DT support, and Rob Herring has some
for ARM Versatile which is now DT-only. Both of these platforms are
now multiplatform.
Finally, a couple of patches from Russell for Dove PMU, and a fix from
Valentin Rothberg for Exynos ADC, which were rebased on top of the
series to avoid conflicts"
* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
ARM: realview: don't select SMP_ON_UP for UP builds
ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
ARM: s3c64xx: fix pm-debug compilation
iio: exynos-adc: fix irqf_oneshot.cocci warnings
ARM: realview: build realview-dt SMP support only when used
ARM: realview: select apropriate targets
ARM: realview: clean up header files
ARM: realview: make all header files local
ARM: no longer make CPU targets visible separately
ARM: integrator: use explicit core module options
ARM: realview: enable multiplatform
ARM: make default platform work for NOMMU
ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
ARM: defconfig: use correct debug_ll settings
ARM: versatile: convert to multi-platform
ARM: versatile: merge mach code into a single file
ARM: versatile: switch to DT only booting and remove legacy code
ARM: versatile: add DT based PCI detection
ARM: pxa: mark ezx structures as __maybe_unused
ARM: pxa: mark raumfeld init functions as __maybe_unused
...
|
||
|
Linus Torvalds
|
5083c54264 |
ARM: SoC cleanups for v4.5
A smallish number of general cleanup commits this release cycle. Some of these are minor tweaks: - shmobile change of binding for their GIC (using arm,pl390 now) - ARCH_RENESAS introduction - Misc other renesas updates There's also a couple of treewide commits from Masahiro Yamada cleaning up const/__initconst for SMP operation structs and a switch to using "depends on" instead of if-constructs on most of the Kconfig platform targets. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWnrTOAAoJEIwa5zzehBx3khsQAKCH1YZfI6AcY0+4z2Kmn/vK 7M86Fnmfa13ju+Iub5YuVsVFVAZ/TGTEVWoiUBMEb73IO0D5Jdl97BhJqV8Kv9Uy jz6PZGXDMJjjkts6N0ehYyu+8WbRvxtVbMNqVD/CO6CH1096UVnxgRz9uTmgJ9Z7 81EDJH4QPPg/zZR/GNV/STf4FKjlcAAN7Vo+5+m12RIptZXXkbGSL3Y6NZAyFlVB JNK5jFcabhD08DsCKa4YzbuubiQO5qiXdoxX+u/OyQWjupxM9YE5gAcna9o4V3FY Y6KnCPcy0XHCkIYk26MITXghr7UFLq9LdD2+s5Ab4HP1XZukw4TUUKd3gwCjCY2h 8RPIfvM7cJmiU3flY56A076Pg+Y35gfMQr+VDe2gMzWtrgCONWma+tHj2JSnNBkv 4I615hysQ46rzgsbpnI/yOQoXTlQH0qsNPjOlsXuRIlC4feNaw2FPTtT4dqEIXjE l7/LeHuu3217/yp2w37OrtMue4C9UZCHVSnHiV6hJgjdS+9UNRWAXMUAqWApSOam 5MPdZ/93+66gSrCdJG1KUhcw4F9MGawLAe4A41Eq7gWDbiJVDcZhRczK+Q79MNKo KvoLWAED+85qS5Z8k/1Ko9NNnl4c4kNR8fAKqD5qcEes7WGLIO1F2/RfC1zMmJfk kHYcwx4sBVPsBHDsAiPN =pQaP -----END PGP SIGNATURE----- Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A smallish number of general cleanup commits this release cycle. Some of these are minor tweaks: - shmobile change of binding for their GIC (using arm,pl390 now) - ARCH_RENESAS introduction - Misc other renesas updates There's also a couple of treewide commits from Masahiro Yamada cleaning up const/__initconst for SMP operation structs and a switch to using "depends on" instead of if-constructs on most of the Kconfig platform targets" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: staging: board: armadillo800eva: Use "arm,pl390" staging: board: kzm9d: Use "arm,pl390" ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC ARM: use "depends on" for SoC configs instead of "if" after prompt ARM/clocksource: use automatic DT probing for ux500 PRCMU ARM: use const and __initconst for smp_operations ARM: hisi: do not export smp_operations structures ARM: mvebu: remove unused mach/gpio.h ARM: shmobile: Remove legacy mach/irqs.h ARM: shmobile: Introduce ARCH_RENESAS MAINTAINERS: Remove link to oss.renesas.com which is closed |
||
|
Linus Torvalds
|
0c582826a1 |
ARM: SoC non-urgent fixes for v4.5
As usual, we queue up a few fixes that don't seem urgent enough to go in
through -rc.
- MAINTAINERS updates to add a list for brcmstb and fix a typo
- A handful of fixes for OMAP 81xx, a recently resurrected platform so these
can't be considered real regressions and thus got queued.
- A couple of other small fixes for scoop, sa1100 and davinci
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWnrNxAAoJEIwa5zzehBx3UwUQAJ0sX5ScDfOjUJFn8ridx4OY
8mcOuR+ij/f2srNUlvBFV4h/j+vOauZ2zlNAjhQtgAJH0PV1pQyTkyLRGoDSwIzI
BDl79IhlMKte3iZ460q3fsVovgF2OwmDVfx0WXC72X6oOv3xt+FPlE4B543Q/v/r
WmL+PvLitaUA44/aK7QwlXg+IVQn2jDP64Uqkal5oVuQCjpeu4tcL99AbCLi4FiZ
XA5wcofKCo/wDeRK0uLWgcrHklVF4QIcvOPRIqvPvFc8V6OldAb22hTOozNa5gSp
QG3S9IFO4OHrcEH6M7XqLaTQv8KXEwzAqFlrciJUBX7rm0cUlzRKwctr1MmLsnKi
UpbHAqUHTLeJaNjKQGEX+vVKBa8PjLN4E05AuSa6TOgDbNgxRu0XUDbLR/9/bgbL
towtcUGTLBYc8itWx+0jhy4ABU0/kZiUbVOdWi5ex76BHI8lnXSvV8dD02iLHmfU
yLskruj/RMubvZxdj/kb7f/Tqn0eyi9TUGS2lqGE3Twj2MUwUaZaPskMEYMQgSZf
U3NWTPCDWvXsBnaO3yENBWUBGA54fy7YfB0gZc7W9Lg+vbnw6j+I4/GX1Eb2toA+
EU9qn6nZ3kI6NAo/2snVsaGLFnAAnsslX6evnFea9mqPMEbrzd9Yg5rUMK7nfsvv
5DpvnsMKnlL80YykQ4yC
=W+es
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull non-urgent ARM SoC fixes from Olof Johansson:
"As usual, we queue up a few fixes that don't seem urgent enough to go
in through -rc.
- MAINTAINERS updates to add a list for brcmstb and fix a typo
- A handful of fixes for OMAP 81xx, a recently resurrected platform
so these can't be considered real regressions and thus got queued.
- A couple of other small fixes for scoop, sa1100 and davinci"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data
ARM: sa1100/simpad: Be sure to clamp return value
ARM: scoop: Be sure to clamp return value
ARM: davinci: fix a problematic usage of WARN()
ARM: davinci: only select WT cache if cache is enabled
ARM: OMAP2+: Remove useless check for legacy booting for dm814x
ARM: OMAP2+: Enable GPIO for dm814x
ARM: dts: Fix dm814x pinctrl address and mask
ARM: dts: Fix dm8148 control modules ranges
ARM: OMAP2+: Fix timer entries for dm814x
ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
ARM: OMAP2+: Add DPPLS clock manager for dm814x
clk: ti: Add few dm814x clock aliases
ARM: dts: Fix dm814x entries for pllss and prcm
MAINTAINERS: gpio-brcmstb: Remove stray '>'
MAINTAINERS: brcmstb: Include Broadcom internal mailing-list
|
||
|
Linus Torvalds
|
e3de671dd6 |
asm-generic changes for 4.5
The asm-generic tree this time contains one series from Nicolas Pitre that makes the optimized do_div() implementation from the ARM architecture available to all architectures. This also adds stricter type checking for callers of do_div, which has uncovered a number of bugs in existing code, and fixes up the ones we have found. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVqARKWCrR//JCVInAQJrBhAAlwZL0IiVGFfDXWtvQGOm+yC5j4vdIhMf 1scsvRbk3ln1xUk5+NM61NpxbQotro78K5HxFZFhaVGUTbbFXM9w2VZSyI8ZaGAJ Od6lBUUyLQmzlbHDJ3v/zrZn8Up7qZlRApmXcbUVDtssfnEfKk4xA2RG9JwIMS1c uZMvnD7N3P9vxDPl+CsYlB2osi6Yks3VQ1tXYe2z6siO+H67zHaF08+ls7fbsd3d oyKjZqlaQ02MIOr+AdR0h9iKyJJ6SXT0DQlsMyzB6aBWmeBCNLNALNIiukDk9Qc1 VV3sF1MOS3LtfU2TeOx4Na7hcd2iC6WYLb271iApO2Ww7t16n+de3i6AipZxLUJ0 08jiRlisTzUhXDobRSqI3mcQlxrB5UGfyblab2z/MqGGmIGJSPPRdTPRQUgi0ZKg jksSmsaPwOQp64FhTgECLJthlYX7h6ULjkvJ9h60gZHa4jhGZbGPeMwHPf1uSm95 EvQE971Ssgm4jwhvxZ/kt1ruuZI/fxxG1Qfw+C25QkXZGKye2nB+icLWeMwz+FXG HLqkmaAjasf5MAV1GiK8U6zoC6bCOLU0Lea83hOwRPZ999v3Nym1giSatNv4/pB+ QmkXRvFi93cdQ643l7xcUEDT2zpk4pogF3xREiBhyaXtqLlT7pPMKsBQOgdWvFuu Ou0ZbEAwIVo= =4psa -----END PGP SIGNATURE----- Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "The asm-generic tree this time contains one series from Nicolas Pitre that makes the optimized do_div() implementation from the ARM architecture available to all architectures. This also adds stricter type checking for callers of do_div, which has uncovered a number of bugs in existing code, and fixes up the ones we have found" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: ARM: asm/div64.h: adjust to generic codde __div64_32(): make it overridable at compile time __div64_const32(): abstract out the actual 128-bit cross product code do_div(): generic optimization for constant divisor on 32-bit machines div64.h: optimize do_div() for power-of-two constant divisors mtd/sm_ftl.c: fix wrong do_div() usage drm/mgag200/mgag200_mode.c: fix wrong do_div() usage hid-sensor-hub.c: fix wrong do_div() usage ti/fapll: fix wrong do_div() usage ti/clkt_dpll: fix wrong do_div() usage tegra/clk-divider: fix wrong do_div() usage imx/clk-pllv2: fix wrong do_div() usage imx/clk-pllv1: fix wrong do_div() usage nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage |
||
Christoph Hellwig
|
e1c7e32453 |
dma-mapping: always provide the dma_map_ops based implementation
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Rafael J. Wysocki
|
6efd3f8cde |
Merge branch 'pm-core'
* pm-core: driver core: Avoid NULL pointer dereferences in device_is_bound() platform: Do not detach from PM domains on shutdown USB / PM: Allow USB devices to remain runtime-suspended when sleeping PM / sleep: Go direct_complete if driver has no callbacks PM / Domains: add setter for dev.pm_domain device core: add device_is_bound() |
||
|
Linus Torvalds
|
a200dcb346 |
virtio: barrier rework+fixes
This adds a new kind of barrier, and reworks virtio and xen to use it. Plus some fixes here and there. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJWlU2kAAoJECgfDbjSjVRpZ6IH/Ra19ecG8sCQo9zskr4zo22Z DZXC3u0sJDBYjjBAiw3IY1FKh7wx2Fr1RhUOj1bteBgcFCMCV1zInP5ITiCyzd1H YYh1w9C2tZaj2T4t9L4hIrAdtIF8fGS+oI2IojXPjOuDLEt6pfFBEjHp/sfl3UJq ZmZvw4OXviSNej7jBw8Xni3Uv18yfmLGXvMdkvMSPC1/XL29voGDqTVwhqJwxLVz k/ZLcKFOzIs9N7Nja0Jl1EiZtC2Y9cpItqweicNAzszlpkSL44vQxmCSefB+WyQ4 gt0O3+AxYkLfrxzCBhUA4IpRex3/XPW1b+1e/V1XjfR2n/FlyLe+AIa8uPJElFc= =ukaV -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio barrier rework+fixes from Michael Tsirkin: "This adds a new kind of barrier, and reworks virtio and xen to use it. Plus some fixes here and there" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (44 commits) checkpatch: add virt barriers checkpatch: check for __smp outside barrier.h checkpatch.pl: add missing memory barriers virtio: make find_vqs() checkpatch.pl-friendly virtio_balloon: fix race between migration and ballooning virtio_balloon: fix race by fill and leak s390: more efficient smp barriers s390: use generic memory barriers xen/events: use virt_xxx barriers xen/io: use virt_xxx barriers xenbus: use virt_xxx barriers virtio_ring: use virt_store_mb sh: move xchg_cmpxchg to a header by itself sh: support 1 and 2 byte xchg virtio_ring: update weak barriers to use virt_xxx Revert "virtio_ring: Update weak barriers to use dma_wmb/rmb" asm-generic: implement virt_xxx memory barriers x86: define __smp_xxx xtensa: define __smp_xxx tile: define __smp_xxx ... |
||
|
Arnd Bergmann
|
6c54809977 |
ARM: debug-ll: fix BCM63xx entry for multiplatform
During my randconfig build testing, I found that a kernel with
DEBUG_AT91_UART and ARCH_BCM_63XX fails to build:
arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]
It turns out that the DEBUG_UART_BCM63XX option is enabled whenever
the ARCH_BCM_63XX is, and that breaks multiplatform kernels because
we then end up using the UART address from BCM63XX rather than the
one we actually configured (if any).
This changes the BCM63XX options to only have one Kconfig option,
and only enable that if the user explicitly turns it on.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
|
||
Geert Uytterhoeven
|
c61f30a255 |
ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz
On r8a7740/armadillo, actual clock rates are ca. 4% lower than reported
by /sys/kernel/debug/clk/clk_summary. Correct the extal1 frequency from
25 MHz to 24 MHz to fix this.
This matches the Armadillo-800 EVA Product Manual, which claims the main
crystal runs at 24 MHz, and the old legacy/reference board code.
Fixes:
|
||
|
Linus Torvalds
|
984065055e |
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.5. I don't think I've missed
anything too major, I'm mostly back at work now but I'll probably get
some sleep in 5 years time.
Summary:
New drivers:
- etnaviv:
GPU driver for the 3D core on the Vivante core used in numerous
ARM boards.
Highlights:
Core:
- Atomic suspend/resume helpers
- Move the headers to using userspace friendlier types.
- Documentation updates
- Lots of struct_mutex removal.
- Bunch of DP MST fixes from AMD.
Panel:
- More DSI helpers
- Support for some new basic panels
i915:
- Basic Kabylake support
- DP link training and detect code refactoring
- fbc/psr fixes
- FIFO underrun fixes
- SDE interrupt handling fixes
- dma-buf/fence support in pageflip path.
- GPU side for MST audio support
radeon/amdgpu:
- Drop UMS support
- GPUVM/Scheduler optimisations
- Initial Powerplay support for Tonga/Fiji/CZ/ST
- ACP audio prerequisites
nouveau:
- GK20a instmem improvements
- PCIE link speed change support
msm:
- DSI support for msm8960/apq8064
tegra:
- Host1X support for Tegra210 SoC
vc4:
- 3D acceleration support
armada:
- Get rid of struct mutex
tda998x:
- Atomic modesetting support
- TMDS clock limitations
omapdrm:
- Atomic modesetting support
- improved TILER performance
rockchip:
- RK3036 VOP support
- Atomic modesetting support
- Synopsys DW MIPI DSI support
exynos:
- Runtime PM support
- of_graph binding for DP panels
- Cleanup of IPP code
- Configurable plane support
- Kernel panic fixes at release time"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (711 commits)
drm/fb_cma_helper: Remove implicit call to disable_unused_functions
drm/amdgpu: add missing irq.h include
drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
drm/vmwgfx: Fix an incorrect lock check
drm: nouveau: fix nouveau_debugfs_init prototype
drm/nouveau/pci: fix check in nvkm_pcie_set_link
drm/amdgpu: validate duplicates first
drm/amdgpu: move VM page tables to the LRU end on CS v2
drm/ttm: add ttm_bo_move_to_lru_tail function v2
drm/ttm: fix adding foreign BOs to the swap LRU
drm/ttm: fix adding foreign BOs to the LRU during init v2
drm/radeon: use kobj_to_dev()
drm/amdgpu: use kobj_to_dev()
drm/amdgpu/cz: force vce clocks when sclks are forced
drm/amdgpu/cz: force uvd clocks when sclks are forced
drm/amdgpu/cz: add code to enable forcing VCE clocks
drm/amdgpu/cz: add code to enable forcing UVD clocks
drm/amdgpu: fix lost sync_to if scheduler is enabled.
drm/amd/powerplay: fix static checker warning for return meaningless value.
drm/sysfs: use kobj_to_dev()
...
|
||
|
Linus Torvalds
|
0cbeafb245 |
Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton:
- more MM stuff:
- Kirill's page-flags rework
- Kirill's now-allegedly-fixed THP rework
- MADV_FREE implementation
- DAX feature work (msync/fsync). This isn't quite complete but DAX
is new and it's good enough and the guys have a handle on what
needs to be done - I expect this to be wrapped in the next week or
two.
- some vsprintf maintenance work
- various other misc bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (145 commits)
printk: change recursion_bug type to bool
lib/vsprintf: factor out %pN[F] handler as netdev_bits()
lib/vsprintf: refactor duplicate code to special_hex_number()
printk-formats.txt: remove unimplemented %pT
printk: help pr_debug and pr_devel to optimize out arguments
lib/test_printf.c: test dentry printing
lib/test_printf.c: add test for large bitmaps
lib/test_printf.c: account for kvasprintf tests
lib/test_printf.c: add a few number() tests
lib/test_printf.c: test precision quirks
lib/test_printf.c: check for out-of-bound writes
lib/test_printf.c: don't BUG
lib/kasprintf.c: add sanity check to kvasprintf
lib/vsprintf.c: warn about too large precisions and field widths
lib/vsprintf.c: help gcc make number() smaller
lib/vsprintf.c: expand field_width to 24 bits
lib/vsprintf.c: eliminate potential race in string()
lib/vsprintf.c: move string() below widen_string()
lib/vsprintf.c: pull out padding code from dentry_name()
printk: do cond_resched() between lines while outputting to consoles
...
|
||
|
Linus Torvalds
|
58cf279aca |
GPIO bulk updates for the v4.5 kernel cycle:
Infrastructural changes:
- In struct gpio_chip, rename the .dev node to .parent to better reflect
the fact that this is not the GPIO struct device abstraction. We will
add that soon so this would be totallt confusing.
- It was noted that the driver .get_value() callbacks was
sometimes reporting negative -ERR values to the gpiolib core, expecting
them to be propagated to consumer gpiod_get_value() and gpio_get_value()
calls. This was not happening, so as there was a mess of drivers
returning negative errors and some returning "anything else than zero"
to indicate that a line was active. As some would have bit 31 set to
indicate "line active" it clashed with negative error codes. This is
fixed by the largeish series clamping values in all drivers with
!!value to [0,1] and then augmenting the code to propagate error codes
to consumers. (Includes some ACKed patches in other subsystems.)
- Add a void *data pointer to struct gpio_chip. The container_of() design
pattern is indeed very nice, but we want to reform the struct gpio_chip
to be a non-volative, stateless business, and keep states internal to
the gpiolib to be able to hold on to the state when adding a proper
userspace ABI (character device) further down the road. To achieve this,
drivers need a handle at the internal state that is not dependent on
their struct gpio_chip() so we add gpiochip_add_data() and
gpiochip_get_data() following the pattern of many other subsystems.
All the "use gpiochip data pointer" patches transforms drivers to this
scheme.
- The Generic GPIO chip header has been merged into the general
<linux/gpio/driver.h> header, and the custom header for that removed.
Instead of having a separate mm_gpio_chip struct for these generic
drivers, merge that into struct gpio_chip, simplifying the code and
removing the need for separate and confusing includes.
Misc improvements:
- Stabilize the way GPIOs are looked up from the ACPI legacy
specification.
- Incremental driver features for PXA, PCA953X, Lantiq (patches from the
OpenWRT community), RCAR, Zynq, PL061, 104-idi-48
New drivers:
- Add a GPIO chip to the ALSA SoC AC97 driver.
- Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but
the branch is merged here too to account for infrastructural changes).
- The sx150x driver now supports the sx1502.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=63rR
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"Here is the bulk of GPIO changes for v4.5.
Notably there are big refactorings mostly by myself, aimed at getting
the gpio_chip into a shape that makes me believe I can proceed to
preserve state for a proper userspace ABI (character device) that has
already been proposed once, but resulted in the feedback that I need
to go back and restructure stuff. So I've been restructuring stuff.
On the way I ran into brokenness (return code from the get_value()
callback) and had to fix it. Also, refactored generic GPIO to be
simpler.
Some of that is still waiting to trickle down from the subsystems all
over the kernel that provide random gpio_chips, I've touched every
single GPIO driver in the kernel now, oh man I didn't know I was
responsible for so much...
Apart from that we're churning along as usual.
I took some effort to test and retest so it should merge nicely and we
shook out a couple of bugs in -next.
Infrastructural changes:
- In struct gpio_chip, rename the .dev node to .parent to better
reflect the fact that this is not the GPIO struct device
abstraction. We will add that soon so this would be totallt
confusing.
- It was noted that the driver .get_value() callbacks was sometimes
reporting negative -ERR values to the gpiolib core, expecting them
to be propagated to consumer gpiod_get_value() and gpio_get_value()
calls. This was not happening, so as there was a mess of drivers
returning negative errors and some returning "anything else than
zero" to indicate that a line was active. As some would have bit
31 set to indicate "line active" it clashed with negative error
codes. This is fixed by the largeish series clamping values in all
drivers with !!value to [0,1] and then augmenting the code to
propagate error codes to consumers. (Includes some ACKed patches
in other subsystems.)
- Add a void *data pointer to struct gpio_chip. The container_of()
design pattern is indeed very nice, but we want to reform the
struct gpio_chip to be a non-volative, stateless business, and keep
states internal to the gpiolib to be able to hold on to the state
when adding a proper userspace ABI (character device) further down
the road. To achieve this, drivers need a handle at the internal
state that is not dependent on their struct gpio_chip() so we add
gpiochip_add_data() and gpiochip_get_data() following the pattern
of many other subsystems. All the "use gpiochip data pointer"
patches transforms drivers to this scheme.
- The Generic GPIO chip header has been merged into the general
<linux/gpio/driver.h> header, and the custom header for that
removed. Instead of having a separate mm_gpio_chip struct for
these generic drivers, merge that into struct gpio_chip,
simplifying the code and removing the need for separate and
confusing includes.
Misc improvements:
- Stabilize the way GPIOs are looked up from the ACPI legacy
specification.
- Incremental driver features for PXA, PCA953X, Lantiq (patches from
the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48
New drivers:
- Add a GPIO chip to the ALSA SoC AC97 driver.
- Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir,
but the branch is merged here too to account for infrastructural
changes).
- The sx150x driver now supports the sx1502"
* tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits)
gpio: generic: make bgpio_pdata always visible
gpiolib: fix chip order in gpio list
gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs()
gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs()
gpio: brcmstb: Allow building driver for BMIPS_GENERIC
gpio: brcmstb: Set endian flags for big-endian MIPS
gpio: moxart: fix build regression
gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs()
leds: pca9532: use gpiochip data pointer
leds: tca6507: use gpiochip data pointer
hid: cp2112: use gpiochip data pointer
bcma: gpio: use gpiochip data pointer
avr32: gpio: use gpiochip data pointer
video: fbdev: via: use gpiochip data pointer
gpio: pch: Optimize pch_gpio_get()
Revert "pinctrl: lantiq: Implement gpio_chip.to_irq"
pinctrl: nsp-gpio: use gpiochip data pointer
pinctrl: vt8500-wmt: use gpiochip data pointer
pinctrl: exynos5440: use gpiochip data pointer
pinctrl: at91-pio4: use gpiochip data pointer
...
|
||
|
Linus Torvalds
|
a016af2e70 |
sound updates for 4.5-rc1
We've had quite busy weeks in this cycle. Looking at ALSA core, the
significant changes are a few fixes wrt timer and sequencer ioctls
that have been revealed by fuzzer recently. Other than that, ASoC
core got a few updates about DAI link handling, but these are rather
straightforward refactoring.
In drivers scene, ASoC received quite lots of new drivers in addition
to bunch of updates for still ongoing Intel Skylake support and
topology API. HD-audio gained a new HDMI/DP hotplug notification via
component. FireWire got a pile of code refactoring/updates with
SCS.1x driver integration.
More highlights are shown below.
[NOTE: this contains also many commits for DRM. This is due to the
pull of drm stable branch into sound tree, as the base of i915 audio
component work for HD-audio. The highlights below don't contain
these DRM changes, as these are supposed to be pulled via drm tree in
anyway sooner or later.]
Core
- Handful fixes to harden ALSA timer and sequencer ioctls against
races reported by syzkaller fuzzer
- Irq description string can be unique to each card; only for
HD-audio for now
ASoC
- Conversion of the array of DAI links to a list for supporting
dynamically adding and removing DAI links
- Topology API enhancements to make everything more component based
and being able to specify PCM links via topology
- Some more fixes for the topology code, though it is still not final
and ready for enabling in production; we really need to get to the
point where that can be done
- A pile of changes for Intel SkyLake drivers which hopefully deliver
some useful initial functionality for systems with this chipset,
though there is more work still to come
- Lots of new features and cleanups for the Renesas drivers
- ANC support for WM5110
- New drivers: Imagination Technologies IPs, Atmel class D speaker,
Cirrus CS47L24 and WM1831, Dialog DA7128, Realtek RT5659 and
RT56156, Rockchip RK3036, TI PC3168A, and AMD ACP
- Rename PCM1792a driver to be generic pcm179x
HD-Audio
- Use audio component for i915 HDMI/DP hotplug handling
- On-demand binding with i915 driver
- bdl_pos_adj parameter adjustment for Baytrail controllers
- Enable power_save_node for CX20722; this shouldn't lead to
regression, hopefully
- Kabylake HDMI/DP codec support
- Quirks for Lenovo E50-80, Dell Latitude E-series, and other Dell
machines
- A few code refactoring
FireWire
- Lots of code cleanup and refactoring
- Integrate the support of SCS.1x devices into snd-oxfw driver;
snd-scs1x driver is obsoleted
USB-audio
- Fix possible NULL dereference at disconnection
- A regression fix for Native Instruments devices
Misc
- A few code cleanups of fm801 driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gvgb
-----END PGP SIGNATURE-----
Merge tag 'sound-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've had quite busy weeks in this cycle. Looking at ALSA core, the
significant changes are a few fixes wrt timer and sequencer ioctls
that have been revealed by fuzzer recently. Other than that, ASoC
core got a few updates about DAI link handling, but these are rather
straightforward refactoring.
In drivers scene, ASoC received quite lots of new drivers in addition
to bunch of updates for still ongoing Intel Skylake support and
topology API. HD-audio gained a new HDMI/DP hotplug notification via
component. FireWire got a pile of code refactoring/updates with
SCS.1x driver integration.
More highlights are shown below.
[ NOTE: this contains also many commits for DRM. This is due to the
pull of drm stable branch into sound tree, as the base of i915 audio
component work for HD-audio. The highlights below don't contain
these DRM changes, as these are supposed to be pulled via drm tree
in anyway sooner or later. ]
Core:
- Handful fixes to harden ALSA timer and sequencer ioctls against
races reported by syzkaller fuzzer
- Irq description string can be unique to each card; only for
HD-audio for now
ASoC:
- Conversion of the array of DAI links to a list for supporting
dynamically adding and removing DAI links
- Topology API enhancements to make everything more component based
and being able to specify PCM links via topology
- Some more fixes for the topology code, though it is still not final
and ready for enabling in production; we really need to get to the
point where that can be done
- A pile of changes for Intel SkyLake drivers which hopefully deliver
some useful initial functionality for systems with this chipset,
though there is more work still to come
- Lots of new features and cleanups for the Renesas drivers
- ANC support for WM5110
- New drivers: Imagination Technologies IPs, Atmel class D speaker,
Cirrus CS47L24 and WM1831, Dialog DA7128, Realtek RT5659 and
RT56156, Rockchip RK3036, TI PC3168A, and AMD ACP
- Rename PCM1792a driver to be generic pcm179x
HD-Audio:
- Use audio component for i915 HDMI/DP hotplug handling
- On-demand binding with i915 driver
- bdl_pos_adj parameter adjustment for Baytrail controllers
- Enable power_save_node for CX20722; this shouldn't lead to
regression, hopefully
- Kabylake HDMI/DP codec support
- Quirks for Lenovo E50-80, Dell Latitude E-series, and other Dell
machines
- A few code refactoring
FireWire:
- Lots of code cleanup and refactoring
- Integrate the support of SCS.1x devices into snd-oxfw driver;
snd-scs1x driver is obsoleted
USB-audio:
- Fix possible NULL dereference at disconnection
- A regression fix for Native Instruments devices
Misc:
- A few code cleanups of fm801 driver"
* tag 'sound-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (722 commits)
ALSA: timer: Code cleanup
ALSA: timer: Harden slave timer list handling
ALSA: hda - Add fixup for Dell Latitidue E6540
ALSA: timer: Fix race among timer ioctls
ALSA: hda - add codec support for Kabylake display audio codec
ALSA: timer: Fix double unlink of active_list
ALSA: usb-audio: Fix mixer ctl regression of Native Instrument devices
ALSA: hda - fix the headset mic detection problem for a Dell laptop
ALSA: hda - Fix white noise on Dell Latitude E5550
ALSA: hda_intel: add card number to irq description
ALSA: seq: Fix race at timer setup and close
ALSA: seq: Fix missing NULL check at remove_events ioctl
ALSA: usb-audio: Avoid calling usb_autopm_put_interface() at disconnect
ASoC: hdac_hdmi: remove unused hdac_hdmi_query_pin_connlist
ASoC: AMD: Add missing include file
ALSA: hda - Fixup inverted internal mic for Lenovo E50-80
ALSA: usb: Add native DSD support for Oppo HA-1
ASoC: Make aux_dev more like a generic component
ASoC: bcm2835: cleanup includes by ordering them alphabetically
ASoC: AMD: Manage ACP 2.x SRAM banks power
...
|
||
Will Deacon
|
da48d094ce |
Kconfig: remove HAVE_LATENCYTOP_SUPPORT
As illustrated by commit |