When I reworked delayed ref comparison in cf4f04325b ("btrfs: move
->parent and ->ref_root into btrfs_delayed_ref_node"), I made a mistake
and returned -1 for the case where ref1->ref_root was > than
ref2->ref_root. This is a subtle bug that can result in improper
delayed ref running order, which can result in transaction aborts.
Fixes: cf4f04325b ("btrfs: move ->parent and ->ref_root into btrfs_delayed_ref_node")
CC: stable@vger.kernel.org # 6.10+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A crash happened when testing cpu hotplug with respect to the memory
mapped ring buffers. It was assumed that the hot plug code was adding a
per CPU buffer that was already created that caused the crash. The real
problem was due to ref counting and was fixed by commit 2cf9733891
("ring-buffer: Fix refcount setting of boot mapped buffers").
When a per CPU buffer is created, it will not be created again even with
CPU hotplug, so the fix to not use CPU hotplug was a red herring. In fact,
it caused only the boot CPU buffer to be created, leaving the other CPU
per CPU buffers disabled.
Revert that change as it was not the culprit of the fix it was intended to
be.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241113230839.6c03640f@gandalf.local.home
Fixes: 912da2c384 ("ring-buffer: Do not have boot mapped buffers hook to CPU hotplug")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
* for-next/pkey-signal:
: Bring arm64 pkey signal delivery in line with the x86 behaviour
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
selftests/mm: Define PKEY_UNRESTRICTED for pkey_sighandler_tests
selftests/mm: Enable pkey_sighandler_tests on arm64
selftests/mm: Use generic pkey register manipulation
arm64: signal: Remove unused macro
arm64: signal: Remove unnecessary check when saving POE state
arm64: signal: Improve POR_EL0 handling to avoid uaccess failures
firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()
Revert "kasan: Disable Software Tag-Based KASAN with GCC"
kasan: Fix Software Tag-Based KASAN with GCC
kasan: Disable Software Tag-Based KASAN with GCC
Documentation/protection-keys: add AArch64 to documentation
arm64: set POR_EL0 for kernel threads
# Conflicts:
# arch/arm64/kernel/signal.c
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
Commit 18011eac28 ("arm64: tls: Avoid unconditional zeroing of
tpidrro_el0 for native tasks") tried to optimise the context switching
of tpidrro_el0 by eliding the clearing of the register when switching
to a native task with kpti enabled, on the erroneous assumption that
the kpti trampoline entry code would already have taken care of the
write.
Although the kpti trampoline does zero the register on entry from a
native task, the check in tls_thread_switch() is on the *next* task and
so we can end up leaving a stale, non-zero value in the register if the
previous task was 32-bit.
Drop the broken optimisation and zero tpidrro_el0 unconditionally when
switching to a native 64-bit task.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: 18011eac28 ("arm64: tls: Avoid unconditional zeroing of tpidrro_el0 for native tasks")
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241114095332.23391-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Use DEFINE_FREE() to define a __free function for dropping thermal
zone template reference counters and use it along with __free() to
simplify code in some places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4628747.LvFx2qVVIh@rjwysocki.net
[ rjw: Add variable initialization to address compiler warning ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a tdc test case to exercise the just-fixed systematic leak of
IDR entries in u32 hnode disposal. Given the IDR in question is
confined to the range [1..0x7FF], it is sufficient to create/delete
the same filter 2048 times to fill it up and get a nonzero exit
status from "tc filter add".
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20241113100428.360460-1-alexandre.ferrieux@orange.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu says:
====================
bonding: fix ns targets not work on hardware NIC
The first patch fixed ns targets not work on hardware NIC when bonding
set arp_validate.
The second patch add a related selftest for bonding.
v4: Thanks Nikolay for the comments:
use bond_slave_ns_maddrs_{add/del} with clear name
fix comments typos
remove _slave_set_ns_maddrs underscore directly
update bond_option_arp_validate_set() change logic
v3: use ndisc_mc_map to convert the mcast mac address (Jay Vosburgh)
v2: only add/del mcast group on backup slaves when arp_validate is set (Jay Vosburgh)
arp_validate doesn't support 3ad, tlb, alb. So let's only do it on ab mode.
====================
Link: https://patch.msgid.link/20241111101650.27685-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 4598380f9c ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The is_mgtime test checks whether the FS_MGTIME flag is set in the
fstype. To get there from the inode though, we have to dereference 3
pointers.
Add a new IOP_MGTIME flag, and have inode_init_always() set that flag
when the fstype flag is set. Then, make is_mgtime test for IOP_MGTIME
instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241113-mgtime-v1-1-84e256980e11@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
It literally directly follows a spin_lock() call.
This whacks an explicit barrier on x86-64.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241113155103.4194099-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Previously any PMU overflow interrupt that fired while a VCPU was
loaded was recorded as a guest event whether it truly was or not. This
resulted in nonsense perf recordings that did not honor
perf_event_attr.exclude_guest and recorded guest IPs where it should
have recorded host IPs.
Rework the sampling logic to only record guest samples for events with
exclude_guest = 0. This way any host-only events with exclude_guest
set will never see unexpected guest samples. The behaviour of events
with exclude_guest = 0 is unchanged.
Note that events configured to sample both host and guest may still
misattribute a PMI that arrived in the host as a guest event depending
on KVM arch and vendor behavior.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-6-coltonlewis@google.com
Break the assignment logic for misc flags into their own respective
functions to reduce the complexity of the nested logic.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-5-coltonlewis@google.com
Make sure PowerPC uses the arch-specific function now that those have
been reorganized.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-4-coltonlewis@google.com
For clarity, rename the arch-specific definitions of these functions
to perf_arch_* to denote they are arch-specifc. Define the
generic-named functions in one place where they can call the
arch-specific ones as needed.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-3-coltonlewis@google.com
For ARM's implementation, perf_instruction_pointer() and
perf_misc_flags() are equivalent to the generic versions in
include/linux/perf_event.h so arch/arm doesn't need to provide its
own versions. Drop them here.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-2-coltonlewis@google.com
The first PPS latch time needs to be calculated by the driver
(in rounded off seconds) and configured as the start time
offset for the cycle. After synchronizing two PTP clocks
running as master/slave, missing this would cause master
and slave to start immediately with some milliseconds
drift which causes the PPS signal to never synchronize with
the PTP master.
Fixes: 186734c158 ("net: ti: icssg-prueth: add packet timestamping and ptp support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20241111095842.478833-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'vmw_user_object_buffer' function may return NULL with incorrect
inputs. To avoid possible null pointer dereference, add a check whether
the 'bo' is NULL in the vmw_framebuffer_surface_create_handle.
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029083429.1185479-1-chenridong@huaweicloud.com
If the clock dwmac->tx_clk was not enabled in intel_eth_plat_probe,
it should not be disabled in any path.
Conversely, if it was enabled in intel_eth_plat_probe, it must be disabled
in all error paths to ensure proper cleanup.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: 9efc9b2b04 ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Link: https://patch.msgid.link/20241108173334.2973603-1-mordan@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
copy_safe_from_sockptr()
return copy_from_sockptr()
return copy_from_sockptr_offset()
return copy_from_user()
copy_from_user() does not return an error on fault. Instead, it returns a
number of bytes that were not copied. Have it handled.
Patch has a side effect: it un-breaks garbage input handling of
nfc_llcp_setsockopt() and mISDN's data_sock_setsockopt().
Fixes: 6309863b31 ("net: add copy_safe_from_sockptr() helper")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241111-sockptr-copy-ret-fix-v1-1-a520083a93fb@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mediatek,mac-wol property is being handled backwards to what is
described in the binding: it currently enables PHY WOL when the property
is present and vice versa. Invert the driver logic so it matches the
binding description.
Fixes: fd1d62d80e ("net: stmmac: replace the use_phy_wol field with a flag")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20241109-mediatek-mac-wol-noninverted-v2-1-0e264e213878@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Accessing `mr_table->mfc_cache_list` is protected by an RCU lock. In the
following code flow, the RCU read lock is not held, causing the
following error when `RCU_PROVE` is not held. The same problem might
show up in the IPv6 code path.
6.12.0-rc5-kbuilder-01145-gbac17284bdcb #33 Tainted: G E N
-----------------------------
net/ipv4/ipmr_base.c:313 RCU-list traversed in non-reader section!!
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by RetransmitAggre/3519:
#0: ffff88816188c6c0 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x8a/0x290
#1: ffffffff83fcf7a8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_dumpit+0x6b/0x90
stack backtrace:
lockdep_rcu_suspicious
mr_table_dump
ipmr_rtm_dumproute
rtnl_dump_all
rtnl_dumpit
netlink_dump
__netlink_dump_start
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
This is not a problem per see, since the RTNL lock is held here, so, it
is safe to iterate in the list without the RCU read lock, as suggested
by Eric.
To alleviate the concern, modify the code to use
list_for_each_entry_rcu() with the RTNL-held argument.
The annotation will raise an error only if RTNL or RCU read lock are
missing during iteration, signaling a legitimate problem, otherwise it
will avoid this false positive.
This will solve the IPv6 case as well, since ip6mr_rtm_dumproute() calls
this function as well.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241108-ipmr_rcu-v2-1-c718998e209b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the pktgen_sample01_simple.sh script, the device variable is uppercase
'DEV' instead of lowercase 'dev'. Because of this typo, the script cannot
enable UDP tx checksum.
Fixes: 460a9aa23d ("samples: pktgen: add UDP tx checksum support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20241112030347.1849335-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Normally, phylib won't notify changes in quick succession. However, as
a result of commit 3e43b903da ("net: phy: Immediately call
adjust_link if only tx_lpi_enabled changes") this is no longer true -
it is now possible that phy_link_down() and phy_link_up() will both
complete before phylink's resolver has run, which means it'll miss that
pl->phy_state.link momentarily became false.
Rename "mac_link_dropped" to be more generic "link_failed" since it will
cover more than the MAC/PCS end of the link failing, and arrange to set
this in phylink_phy_change() if we notice that the PHY reports that the
link is down.
This will ensure that we capture an EEE reconfiguration event.
Fixes: 3e43b903da ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/E1tAtcW-002RBS-LB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: a few more fixes
Three small fixes related to the MPTCP path-manager:
- Patch 1: correctly reflect the backup flag to the corresponding local
address entry of the userspace path-manager. A fix for v5.19.
- Patch 2: hold the PM lock when deleting an entry from the local
addresses of the userspace path-manager to avoid messing up with this
list. A fix for v5.19.
- Patch 3: use _rcu variant to iterate the in-kernel path-manager's
local addresses list, when under rcu_read_lock(). A fix for v5.17.
====================
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-0-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are
used as expected to iterate over the list of local addresses, but
list_for_each_entry() was used instead of list_for_each_entry_rcu() in
__lookup_addr(). It is important to use this variant which adds the
required READ_ONCE() (and diagnostic checks if enabled).
Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it
is called under the pernet->lock and not rcu_read_lock(), an extra
condition is then passed to help the diagnostic checks making sure
either the associated spin lock or the RCU lock is held.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-3-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When traversing userspace_pm_local_addr_list and deleting an entry from
it in mptcp_pm_nl_remove_doit(), msk->pm.lock should be held.
This patch holds this lock before mptcp_userspace_pm_lookup_addr_by_id()
and releases it after list_move() in mptcp_pm_nl_remove_doit().
Fixes: d9a4594eda ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-2-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just like in-kernel pm, when userspace pm does set_flags, it needs to send
out MP_PRIO signal, and also modify the flags of the corresponding address
entry in the local address list. This patch implements the missing logic.
Traverse all address entries on userspace_pm_local_addr_list to find the
local address entry, if bkup is true, set the flags of this entry with
FLAG_BACKUP, otherwise, clear FLAG_BACKUP.
Fixes: 892f396c8e ("mptcp: netlink: issue MP_PRIO signals from userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-1-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
eb284f4b37 drm/nouveau/dp: Honor GSP link training retry timeouts
tried to fix a problem with panel retires, however it appears
the auxch also needs the same treatment, so add the same retry
wrapper around it.
This fixes some eDP panels after a suspend/resume cycle.
Fixes: eb284f4b37 ("drm/nouveau/dp: Honor GSP link training retry timeouts")
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111034126.2028401-2-airlied@gmail.com
When this code moved to non-coherent allocator the sync was put too
early for some firmwares which called the setup function, move the
sync down after the setup function.
Reported-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Fixes: 9b340aeb26 ("nouveau/firmware: use dma non-coherent allocator")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114004603.3095485-1-airlied@gmail.com
Fix a locking issue in the asymmetric CPU capacity setup code in the
intel_pstate driver that may lead to a deadlock if CPU online/offline
runs in parallel with the code in question, which is unlikely but not
impossible (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=AIPF
-----END PGP SIGNATURE-----
Merge tag 'pm-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a locking issue in the asymmetric CPU capacity setup code in the
intel_pstate driver that may lead to a deadlock if CPU online/offline
runs in parallel with the code in question, which is unlikely but not
impossible (Rafael Wysocki)"
* tag 'pm-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Rearrange locking in hybrid_init_cpu_capacity_scaling()
Two bug fixes for TPM bus encryption (the remaining reported issues in
the feature).
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZzT7PQAKCRAaerohdGur
0ny/AP9e6gN+H3lIVQNdbeSKhtBJyWalxOnvAQ4ymjTCyyyqXAD/Ua36HA7FRYxI
Ltp2swtz3WcsGgqtRpU+cmcb1Y21DAg=
=5kvC
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two bug fixes for TPM bus encryption (the remaining reported issues in
the feature)"
* tag 'tpmdd-next-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Disable TPM on tpm2_create_primary() failure
tpm: Opt-in in disable PCR integrity protection
seq_printf is costly. For each block device, 19 decimal values are
yielded in /proc/diskstats via seq_printf. On a system with 16 logical
block devices, profiling for open/read/close sequences shows seq_printf
took ~75% samples of diskstats_show:
diskstats_show(92.626% 2269372/2450040)
seq_printf(76.026% 1725313/2269372)
vsnprintf(99.163% 1710866/1725313)
format_decode(26.597% 455040/1710866)
number(19.554% 334542/1710866)
memcpy_orig(4.183% 71570/1710866)
...
srso_return_thunk(0.009% 148/1725313)
part_stat_read_all(8.030% 182236/2269372)
One million rounds of open/read/close /proc/diskstats takes:
real 0m37.687s
user 0m0.264s
sys 0m32.911s
On average, each sequence tooks ~0.032ms
With this patch, most decimal values are yield via seq_put_decimal_ull,
performance is significantly improved:
real 0m20.792s
user 0m0.316s
sys 0m20.463s
On average, each sequence tooks ~0.020ms, a ~37.5% improvement.
Signed-off-by: David Wang <00107082@163.com>
Link: https://lore.kernel.org/r/20241108054500.4251-1-00107082@163.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
they are unused since 2021 (David Alan Gilbert)
- Make the sp804 driver user selectable as they may be unused on some
platforms (Mark Brown)
- Don't fail if the ti-dm does not describe an interrupt in the DT as
this could be a normal situation if the PWM is used (Judith Mendez)
- Always use cluster 0 counter as a clocksource on a multi-cluster
system to prevent problems related to the time shifting between
clusters if multiple per cluster clocksource is used (Paul Burton)
- Move the RaLink system tick counter from the arch directory to the
clocksource directory (Sergio Paracuellos)
- Convert the owl-timer bindings into yaml schema (Ivaylo Ivanov)
- Fix child node refcount handling on the TI DM by relying on the
__free annotation to automatically release the refcount on the node
(Javier Carrasco)
- Remove pointless cast in the GPX driver as PTR_ERR already does that
(Tang Bin)
- Use of_property_present() for non-boolean properties where it is
possible in the different drivers (Rob Herring)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmc0tu4ACgkQqDIjiipP
6E8mGAf/cgQ+y4u+nk/AX4ZpX3TWQxbcRFXEaTPwgEpRwSRs/QMzkTI+ZZiTP6xa
a+P8YHPBPSXWjHk4QnE+YERiXNt72uvYuTUrF4cw9e2HEb/2BCNRYH0rNiRhl5Nu
pKmIsiA9TGFSSLUjfdpY38UqeAMIaU23vN3w6gxc0+bQoUk2xPhICj52qTYt0uk/
KaEBa8uGx72mmKz1UmXoGUaoclNbjGdqq8Ix+keBX/qGX4bQpbQQybNSxIrx8ekn
oYyTDmA+6wPbDKlAASG7S+k4vQLirxTB5U7ifdxKtRBiGmFFLXzKRNveetk70lO7
9WH8h3h8CcZFPnrAKCc36FJwYBx6LQ==
=O7SC
-----END PGP SIGNATURE-----
Merge tag 'timers-v6.13-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/event updates from Daniel Lezcano:
- Remove unused dw_apb_clockevent_[pause|resume|stop] functions as
they are unused since 2021 (David Alan Gilbert)
- Make the sp804 driver user selectable as they may be unused on some
platforms (Mark Brown)
- Don't fail if the ti-dm does not describe an interrupt in the DT as
this could be a normal situation if the PWM is used (Judith Mendez)
- Always use cluster 0 counter as a clocksource on a multi-cluster
system to prevent problems related to the time shifting between
clusters if multiple per cluster clocksource is used (Paul Burton)
- Move the RaLink system tick counter from the arch directory to the
clocksource directory (Sergio Paracuellos)
- Convert the owl-timer bindings into yaml schema (Ivaylo Ivanov)
- Fix child node refcount handling on the TI DM by relying on the
__free annotation to automatically release the refcount on the node
(Javier Carrasco)
- Remove pointless cast in the GPX driver as PTR_ERR already does that
(Tang Bin)
- Use of_property_present() for non-boolean properties where it is
possible in the different drivers (Rob Herring)
Link: https://lore.kernel.org/lkml/8d402321-96f1-47f7-9347-a850350d60de@linaro.org
Some applications require Vout to be higher than the detectable voltage
range of the Vsense pin for a given rail. In such applications, a voltage
divider may be placed between Vout and the Vsense pin, but this results
in erroneous telemetry being read back from the part. This change adds
support for a voltage divider to be defined in the devicetree for a (or
multiple) specific rail(s) for a supported digital multiphase device and
for the applicable Vout telemetry to be scaled based on the voltage
divider configuration.
This change copies the implementation of the vout-voltage-divider
devicetree property defined in the maxim,max20730 bindings schema since
it is the best fit for the use case of scaling hwmon PMBus telemetry. The
generic voltage-divider property used by many iio drivers was determined
to be a poor fit because that schema is tied directly to iio and the
isl68137 driver is not an iio driver.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Message-ID: <8c2d048f87282bcf66313afbf5e923d8fc17b4d7.1731439797.git.grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add devicetree bindings to support declaring optional voltage dividers to
the rail outputs of supported digital multiphase regulators. Some
applications require Vout to exceed the voltage range that the Vsense pin
can detect. This binding definition allows users to define the
characteristics of a voltage divider placed between Vout and the Vsense
pin for any rail powered by the device.
These bindings copy the vout-voltage-divider property defined in the
maxim,max20730 bindings schema since it is the best fit for the use case
of scaling hwmon PMBus telemetry. The generic voltage-divider property
used by many iio drivers was determined to be a poor fit because that
schema is tied directly to iio for the purpose of scaling io-channel
voltages and the isl68137 driver is not an iio driver.
New schema file named isil,isl68137.yaml to align with the corresponding
driver name and pre-existing bindings ported from trivial bindings.
However, all new device bindings use renesas as the vendor prefix
since Renesas acquired Intersil and now maintains all documentation
for the devices.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <f7ac200e982961ff733de27a5c4505c04d68b6f3.1731439797.git.grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
It's possible to build a kernel with tmp108 built-in but i3c support
in a loadable module, but that results in a link failure:
x86_64-linux-ld: drivers/hwmon/tmp108.o: in function `p3t1085_i3c_probe':
tmp108.c:(.text+0x5f9): undefined reference to `i3cdev_to_dev'
Add a Kconfig dependency to ensure only the working configurations
are allowed.
Fixes: c40655e331 ("hwmon: (tmp108) Add support for I3C device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-ID: <20241113175615.2442851-1-arnd@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch fixes an issue in the function xenbus_dev_probe(). In the
xenbus_dev_probe() function, within the if (err) branch at line 313, the
program incorrectly returns err directly without releasing the resources
allocated by err = drv->probe(dev, id). As the return value is non-zero,
the upper layers assume the processing logic has failed. However, the probe
operation was performed earlier without a corresponding remove operation.
Since the probe actually allocates resources, failing to perform the remove
operation could lead to problems.
To fix this issue, we followed the resource release logic of the
xenbus_dev_remove() function by adding a new block fail_remove before the
fail_put block. After entering the branch if (err) at line 313, the
function will use a goto statement to jump to the fail_remove block,
ensuring that the previously acquired resources are correctly released,
thus preventing the reference count leak.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and detecting potential issues where resources are not properly managed.
In this case, the tool flagged the missing release operation as a
potential problem, which led to the development of this patch.
Fixes: 4bac07c993 ("xen: add the Xenbus sysfs and virtual device hotplug driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241105130919.4621-1-chenqiuji666@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The earlier bug fix misplaced the error-label when dealing with the
tpm2_create_primary() return value, which the original completely ignored.
Cc: stable@vger.kernel.org
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1087331
Fixes: cc7d859434 ("tpm: Rollback tpm2_load_null()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The initial HMAC session feature added TPM bus encryption and/or integrity
protection to various in-kernel TPM operations. This can cause performance
bottlenecks with IMA, as it heavily utilizes PCR extend operations.
In order to mitigate this performance issue, introduce a kernel
command-line parameter to the TPM driver for disabling the integrity
protection for PCR extend operations (i.e. TPM2_PCR_Extend).
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/linux-integrity/20241015193916.59964-1-zohar@linux.ibm.com/
Fixes: 6519fea6fd ("tpm: add hmac checks to tpm2_pcr_extend()")
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
LIFO ordering for batched completions is a bit unexpected and also
defeats some merging optimizations in e.g. the XFS buffered write
code. Now that we can easily add the request to the tail of the list
do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add requests to the tail of the list instead of the front so that they
are queued up in submission order.
Remove the re-reordering in blk_mq_dispatch_plug_list, virtio_queue_rqs
and nvme_queue_rqs now that the list is ordered as expected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the semi-open coded request list helpers with a proper rq_list
type that mirrors the bio_list and has head and tail pointers. Besides
better type safety this actually allows to insert at the tail of the
list, which will be useful soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
