Add filter and compressor DSP controls for the Vocaster interfaces.
Mark scarlett2_notify_input_dsp() as __always_unused until it gets
used when the Vocaster callback function array is added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <a45316f79600b862dae38da24f13def638b06476.1710264833.git.g@b4.vu>
Add controls for the input mute switches that the Vocaster interfaces
have. Mark scarlett2_notify_input_mute() as __always_unused until it
gets used when the Vocaster callback function array is added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <3b384b4e759241bd06f0c223e9f4f00467d88318.1710264833.git.g@b4.vu>
The autogain status texts are different for Vocaster vs. Scarlett 4th
Gen, so make them configurable per-config-set.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <b1adcd3dc48117d4ebe16812eeb7f1dbf1ede472.1710264833.git.g@b4.vu>
Remove the #define SCARLETT2_MAX_GAIN_DB and replace with a
per-config-set TLV as the Vocaster has a maximum gain of 70dB vs the
4th Gen 69dB.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <ade8e18ce38927ea0224946ec7cfea23ad3793d8.1710264833.git.g@b4.vu>
The 4th Gen Scarlett interfaces added software-controllable input gain
along with channel select, channel link, auto-gain, and "safe" mode.
Vocaster has software-controllable input gain and auto-gain but not
channel select, channel link, or safe mode.
Add a device info field safe_input_count to indicate how many channels
have a safe mode control, and use the presence of the input select and
input link switch configuration parameters to determine if those
controls should be created.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <167f04a37d0fb23f3077705df835adbc4f2b6a8e.1710264833.git.g@b4.vu>
Update scarlett2_usb_get_config() to support 32-bit values which are
needed by the upcoming Vocaster support.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <ee35dce0172b2aa3fec8163ab8f35bdc35a141bd.1710264833.git.g@b4.vu>
scarlett2_usb_set_config() was using size = 0 as a signal to use the
parameter buffer. Replace that with an explicit indication (pbuf = 1),
as the upcoming Vocaster support has a config item written via the
parameter buffer with size = 1 rather than the implicit size of 8.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <50a7d85bb04f9a7f13f667c70a706826c8d3ef93.1710264833.git.g@b4.vu>
The location pointed to by gen4_write_addr and gen4_write_addr + 1 is
officially known as the parameter buffer. Update the code to match.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <aa36ecb8d3ce67387b5edf6c900f0b8a509241ce.1710264833.git.g@b4.vu>
Add hwdep read op so flash segments can be read.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <800d20a801e8c59c2905c82ecae5676cd4f31429.1710264833.git.g@b4.vu>
After scarlett2_usb() sends a command, it seems that we should wait
for an ACK before attempting to read the response. Not doing that
didn't seem necessary previously but seems to be causing occasional
issues with 4th Gen devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <452d1263c40fa8eba1cfb24e2055e40a84cbc437.1710264833.git.g@b4.vu>
So that more forward declarations won't be required when we add
handling of the ACK notification, move the initialisation functions to
after the notification functions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <0922071cb8be99a2394705de27b917d1e4e46f3f.1710264833.git.g@b4.vu>
This reverts commit 1601cd53c7.
This fix is applied globally to all devices, and it may change the
existing control names. When the devices are managed with the fixed
configuration like UCM, such control name mismatch may lead to
significant regressions.
For avoiding that kind of regression, we would need to apply such
changes conditionally, but it'd take time to settle down.
While the original fix is a good thing in general, in order to address
the regression, let's revert the change for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218605
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Message-ID: <20240316083744.28126-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If a usb audio device sets more bits than the amount of channels
it could write outside of the map array.
Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
Fixes: 04324ccc75 ("ALSA: usb-audio: add channel map support")
Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 4th Gen input preamp gain range is 0dB to +69dB, although the
control values range from 0 to 70. Replace SCARLETT2_MAX_GAIN with
SCARLETT2_MAX_GAIN_VALUE and SCARLETT2_MAX_GAIN_DB, and update the TLV
again.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: a45cf0a083 ("ALSA: scarlett2: Fix Scarlett 4th Gen input gain range")
Message-ID: <Ze7OMA8ntG7KteGa@m.b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The input gain range TLV was declared as -70dB to 0dB, but the preamp
gain range is actually 0dB to +70dB. Rename SCARLETT2_GAIN_BIAS to
SCARLETT2_MAX_GAIN and update the TLV to fix.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 0a995e38dc ("ALSA: scarlett2: Add support for software-controllable input gain")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <9168317b5ac5335943d3f14dbcd1cc2d9b2299d0.1710047969.git.g@b4.vu>
The meanings of the raw_auto_gain_status values were originally
guessed through experimentation, but the official names have now been
discovered. Update the autogain status control strings accordingly.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 0a995e38dc ("ALSA: scarlett2: Add support for software-controllable input gain")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <8bd12a5e7dc714801dd9887c4bc5cb35c384e27c.1710047969.git.g@b4.vu>
The value currently being read to determine the low-voltage state is
actually the front panel state. Fix the code to use the correct offset
for the low-voltage state.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: d7cfa2fdfc ("ALSA: scarlett2: Add power status control")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <d97b7d87f43b0e54f37e1552394be2f3ae182704.1710047969.git.g@b4.vu>
When building feature controls from a unit without a name, we try to
derive a name first from the feature unit's input, then fall back to the
output terminal.
If a feature unit connects directly to a "USB Streaming" input terminal
rather than a mixer or other virtual type, the control receives the
somewhat meaningless name "PCM", even if the output had a descriptive
type such as "Headset" or "Speaker".
Here is an example of such AudioControl descriptor from a USB headset
which ends up named "PCM Playback" and is therefore not recognized as
headphones by userspace:
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 4
wTerminalType 0x0101 USB Streaming
bAssocTerminal 5
bNrChannels 2
wChannelConfig 0x0003
Left Front (L)
Right Front (R)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 5
wTerminalType 0x0402 Headset
bAssocTerminal 4
bSourceID 6
iTerminal 0
AudioControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 6
bSourceID 4
bControlSize 2
bmaControls(0) 0x0002
Volume Control
bmaControls(1) 0x0000
bmaControls(2) 0x0000
iFeature 0
Other headsets and DACs I tried that used their output terminal for
naming only did so due to their input being an unnamed sidetone mixer.
Instead of always starting with the input terminal, check the type of it
first. If it seems uninteresting, invert the order and use the output
terminal first for naming.
This makes userspace recognize headsets with simple controls as
headphones, and leads to more consistent naming of playback devices
based on their outputs irrespective of sidetone mixers.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Link: https://lore.kernel.org/r/20240301231107.42679-1-kl@kl.wtf
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The USB audio driver tries to retrieve MIDI jack name strings that can
be used for rawmidi substream names and sequencer port names, but its
checking is too strict: often the firmware provides the jack info for
unexpected directions, and then we miss the info although it's
present.
In this patch, the code to extract the jack info is changed to allow
both in and out directions in a single loop. That is, the former two
functions to obtain the descriptor pointers for jack in and out are
changed to a single function that returns iJack of the corresponding
jack ID, no matter which direction is used. It's a code
simplification at the same time as well as the fix.
Fixes: eb596e0fd1 ("ALSA: usb-audio: generate midi streaming substream names from jack names")
Link: https://lore.kernel.org/r/20240215153144.26047-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For devices with multiple clock sources connected to a selector, we need
to check what a clock selector control request has returned. This is
needed to ensure that a requested clock source is indeed selected and for
autoclock feature to work.
For devices with single clock source connected, if we get an error there
is nothing else we can do about it. We can't skip clock selector setup as
it is required by some devices. So lets just ignore error in this case.
This should fix various buggy Mackie devices:
[ 649.109785] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[ 649.111946] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[ 649.113822] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
There is also interesting info from the Windows documentation [1] (this
is probably why manufacturers dont't even test this feature):
"The USB Audio 2.0 driver doesn't support clock selection. The driver
uses the Clock Source Entity, which is selected by default and never
issues a Clock Selector Control SET CUR request."
Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217314
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218175
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218342
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240201115308.17838-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.
MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:
[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 67794f882a.
We need to explicitly set up the clock selector to workaround a problem
with the Behringer mixers. This was originally done in d2e8f64125
("ALSA: usb-audio: Explicitly set up the clock selector")
The problem with MOTU M Series mentioned in commit message was fixed in
a different way by checking control capabilities of clock selectors.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240128132338.819273-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clock selector control might be read-only. Add corresponding checks
to prevent sending control requests that would fail.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240125205457.28258-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The quirk table entries should be put in the USB ID order, but some
entries have been put in random places. Re-sort them.
Fixes: bf990c1023 ("ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue")
Fixes: fd28941cff ("ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless")
Fixes: dfd5fe19db ("ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless")
Fixes: 4a63e68a29 ("ALSA: usb-audio: Fix microphone sound on Nexigo webcam.")
Fixes: 7822baa844 ("ALSA: usb-audio: add quirk for RODE NT-USB+")
Fixes: 4fb7c24f69 ("ALSA: usb-audio: Add quirk for Fiero SC-01")
Fixes: 2307a0e1ca ("ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)")
Link: https://lore.kernel.org/r/20240124155307.16996-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The RODE NT-USB+ is marketed as a professional usb microphone, however the
usb audio interface is a mess:
[ 1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4
[ 1.503912] usb 1-5: config 1 has no interface number 4
[ 1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09
[ 1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.519697] usb 1-5: Product: RØDE NT-USB+
[ 1.519699] usb 1-5: Manufacturer: RØDE
[ 1.519700] usb 1-5: SerialNumber: 1D773A1A
[ 8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82
[ 8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82
[ 8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2
Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get.
I have asked Rode support to fix it, but they show no interest.
Signed-off-by: Sean Young <sean@mess.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240124151524.23314-1-sean@mess.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit 086b957cc1 ("ALSA: usb-audio: Skip the clock selector
inquiry for single connections") we are already skipping clock selector
inquiry if only one clock source is connected, but we are still sending
a set request. Lets skip that too.
This should fix errors when setting a sample rate on devices that don't
have any controls present within the clock selector. An example of such
device is the new revision of MOTU M Series (07fd:000b):
AudioControl Interface Descriptor:
bLength 8
bDescriptorType 36
bDescriptorSubtype 11 (CLOCK_SELECTOR)
bClockID 1
bNrInPins 1
baCSourceID(0) 2
bmControls 0x00
iClockSelector 0
Perhaps we also should check if clock selectors are readable and writeable
like we already do for clock sources, but this is out of scope of this
patch.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217601
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240123134635.54026-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The device fails to initialize otherwise, giving the following error:
[ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240123084935.2745-1-belegdol+github@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the Direct button on the Solo Gen 4 is held for 3 seconds, the
PCM 1 and 2 inputs are toggled between DSP Outputs 1 and 2, and Mixer
Outputs E and F. This patch adds the corresponding ALSA control.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/8c67c6131c459588ac4edab11e1fbc40a8297328.1703612638.git.g@b4.vu
The Scarlett 4i4 Gen 4 adds a R/O headphone volume control in addition
to a R/O master volume control (which is already supported).
Mark the new scarlett2_notify_volume() function with __always_unused
until it gets used when the Gen 4 notification callback function arrays
are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/bd4a76da157f8cc3fbfa02eba96d02bdb86817c5.1703612638.git.g@b4.vu
Early firmware for the Scarlett Gen 4 devices has sufficient
differences that it is better to enforce a minimum firmware version
than to try and work around those differences. Add a minimum firmware
version field to the device info struct, and display a message if the
firmware version is too old. Only create the Firmware Version and MSD
(optional) controls in this case.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/5455a7e54bda81556066abd7f761b10e9c5f8a16.1703612638.git.g@b4.vu
The DSP mux channels are of type SCARLETT2_PORT_TYPE_MIX so the
ALSA controls would refer to them "Mix X" and "Mixer Input X". This
patch fixes them to be called "DSP X" and "DSP Input X".
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/2d91d0a74d5c7f6179e950bed2c80a4498d16649.1703612638.git.g@b4.vu
The DSP mux channels in the Scarlett 4th Gen appear as
SCARLETT2_PORT_TYPE_MIX ports but do not have corresponding mixer
controls. Add a dsp_count option to the device info struct to exclude
those DSP channels from the num_mix_in/num_mix_out counts.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/b78bdb1a7624d55783f5bf0e1ffbfa47a9e9a800.1703612638.git.g@b4.vu
The mixes used by Direct Monitor feature on the Scarlett 4th Gen Solo
and 2i2 interfaces are configurable. This patch adds ALSA controls for
the gains which are copied to the mixer when Direct Monitor is
enabled.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/96282a805b45f04560e5923d170745363906b7f3.1703612638.git.g@b4.vu
When the Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2
interfaces is used, the Mix A and B gains are updated by the
interface. This patch calls snd_ctl_notify() for the ALSA mix controls
when a Direct Monitor notification is received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/713d032e343e0547212368919bef17d6fa1c9d29.1703612638.git.g@b4.vu
The Scarlett 4th Gen small interfaces have a software-controllable
mixer like the large 2nd and 3rd Gen interfaces do. Pressing the
"Direct" button on the interface updates the mixer controls, which
this driver hasn't needed to deal with previously.
This commit stores the ALSA mixer controls, and adds a mix_updated
flag so that the controls can be updated when a notification is
received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/3ba27c60230511b80b0fa75727551ea70f17d829.1703612638.git.g@b4.vu
Add a control to retrieve the power status from the interface
(bus-powered, external-powered, or insufficient power).
Mark the new scarlett2_notify_power_status() function with
__always_unused until it gets used when the Gen 4 notification
callback function arrays are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/d9806bc41adc45b1c19749562fec7765ba24351d.1703612638.git.g@b4.vu
When phantom power is enabled or disabled, the autogain control cannot
be enabled until the interface has signalled that the change is
complete and the input is unmuted. Update those controls to be
read-only during this time.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/f49f7bf9358e1f20713d95d407d8d6a436859877.1703612638.git.g@b4.vu
While the autogain function is running, the other input controls
(select, link, gain, safe, level, air, and phantom) can't be modified.
Update those controls to be read-only during this time.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/ad13bacae77860de8c2d7c89f6ec2a1ee104e65f.1703612638.git.g@b4.vu
Some devices in the Scarlett Gen 4 series have support for
software-controllable input gain. Along with this comes a channel
select option, an auto-gain feature, "safe" mode, and linking two
channels into a stereo pair.
Mark the new scarlett2_notify_input_*() functions with __always_unused
until they get used when the Gen 4 notification callback function
arrays are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/fc39e80bb39863dd1579d342097203942b4f3034.1703612638.git.g@b4.vu
Gen 2/3 interfaces would only use 0/1 values for input level and
phantom power switch controls. Gen 4 interfaces use the second bit to
indicate that the state should be changed (or is changing), and the
input is to be muted (or is muted) while that happens.
Add a "mute" flag to config items to enable this behaviour for the
level/phantom controls.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/f603cd16079c97fad910087e0302828a289d1c15.1703612638.git.g@b4.vu
Writing Scarlett Gen 4 parameters differs from Gen 2 and Gen 3:
- the values are written into a shared write location
- the values are only byte-sized
- the read locations now extend beyond 0xFF
- a separate NVRAM save step is no longer required
This patch implements that alternate write style, triggered by setting
the config item size field to zero.
The write address is specified through a new config set field
gen4_write_addr.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1624e6d8a0c629c3bdfe53825b16e8b589724fc4.1703612638.git.g@b4.vu
The Focusrite Scarlett Gen 4 Solo has Air and Phantom Power controls
on analogue input #2 (the Gen 3 Solo had these controls on analogue
input #1). Add air_input_first and phantom_first device info options
to cater for this.
These options are similar to the level_input_first option that was
added for the Gen 3 Solo, but these new options do not require
adjusting the index of the control.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/19511f18895b8c094985a4a5691fbc1dc028c108.1703612638.git.g@b4.vu
The notification value for monitor_other on the large interfaces is
the same as the notification value for direct_monitor on the 3rd Gen
small interfaces. Add a separate scarlett3a_notifications array and
split out the direct_monitor handling.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/9b56a483e3e9c1447684f18239a88652c1f01445.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Gen 2/3 devices have a single notification value for "input other"
changes. Gen 4 has separate notification values for level, pad, air,
and phantom power changes. Therefore, split the input_other_updated
field and the scarlett2_update_input_other() function into the four
components so that they can be handled separately later.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/a1a1d190659d56689792aa20ceeb53a6175171ad.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
db_scale_scarlett2_gain is the TLV for the output volume controls.
Gen 4 has software-controllable input gain controls, so rename this to
db_scale_scarlett2_volume so we can use that name for the inputs.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/d544ec7cc5d5a849da104a5a78b17f61f50657c1.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently-supported interfaces with a mixer have per-channel volume
controls, but this changes in Gen 4. Add a check so that the Playback
Volume and associated controls don't get created unless the
SCARLETT2_CONFIG_LINE_OUT_VOLUME config item is present.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/30f68cb311e27f2cc1351cb846218f7248a90263.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By splitting config set gen2 into gen2a/b (for 6i6/18i8 vs 18i20), and
gen3b into gen3b/c (for 4i4/8i6 vs 18i8/18i20), we can use
scarlett2_has_config_item() instead of the per-device line_out_hw_vol.
As Gen 4 has a master volume control but no SW/HW switches, check for
both SCARLETT2_CONFIG_MASTER_VOLUME and SCARLETT2_CONFIG_SW_HW_SWITCH
as needed, even though for Gen 2 and Gen 3 the former implies the
latter.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/307c4f8d6d2e034f3e386b51d72a39d77c8a9fce.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Scarlett Gen 2 and Gen 3 devices combine volume and dim/mute
notifications. The Scarlett 4i4 Gen 4 has volume change notification
but no dim/mute control so split dim_mute_update out from vol_update.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/bf63f48bcc68ae739bd9948c8ee2f87ee7af22a2.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The struct scarlett2_usb_volume_status matched the config space layout
of a few volume controls that could be read together and were in fixed
locations between Gen 2 and Gen 3 devices.
Gen 4 devices have removed, moved, and new related controls, so this
needs to be cleaned up. By adding SCARLETT2_CONFIG_MASTER_VOLUME (the
only config item that didn't already have its own entry, because it is
read-only), we can remove:
- struct scarlett2_usb_volume_state,
- #define SCARLETT2_USB_VOLUME_STATUS_OFFSET, and
- scarlett2_usb_get_volume_status()
and replace with calls to scarlett2_usb_get_config().
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/2ee88994857246bf89fab8e62ac279f3bcf96192.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The notification values were previously #define'd, and checked with a
series of if() statements calling functions. Replace with an array of
masks/callback function pointers, and a pointer to that array in the
scarlett2_config_set definitions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/0ee2a3786f9d30c89eeae59d7e933424e8f39162.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace array index into config sets with a pointer to a config set.
Copy the config_set pointer to the scarlett2_data struct.
This simplifies both the definition and use of the config sets.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/61f69519fb6fbb677e066891a3a6771aeeec106d.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add struct scarlett2_config_set so that data which is common to all
devices in a config set can be stored there rather than in the
model-specific data.
Accordingly, rename scarlett2_config_items[] to
scarlett2_config_sets[].
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/bfdb04cd6239af9a8c26a52da0537980f77c0437.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the presence of a mixer is determined by checking if the
device uses the GEN_3A config set. Add scarlett2_has_mixer() function
which checks for the presence of mux_assignment entries instead.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ef6f4d360c2fe682ab65f83cccbe5be66ccc6296.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit removes the explicit integer assignments from the enums.
The actual values matter little, and not assigning explicit values
makes it easier to modify the longer lists in the future.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/67f0f1bb8b90d7c76dfe7062d22d33bbde19cf93.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ops.write to the hwdep interface. Once the upgrade firmware flash
segment has been erased, writes to the hwdep fd are permitted, and
translated to SCARLETT2_USB_WRITE_SEGMENT commands to the device.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZY65S0ojShSNSeRQ@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ioctls:
- SCARLETT2_IOCTL_SELECT_FLASH_SEGMENT
- SCARLETT2_IOCTL_ERASE_FLASH_SEGMENT
- SCARLETT2_IOCTL_GET_ERASE_PROGRESS
The settings or the firmware flash segment can be selected and then
erased (asynchronous operation), and the erase progress can be
monitored.
If the erase progress is not monitored, then subsequent hwdep
operations will block until the erase is complete.
Once the erase is started, ALSA controls that communicate with the
device will all return -EBUSY, and the device must be rebooted.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/227409adb672f174bf3db211e9bda016fb4646ea.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Call SCARLETT2_USB_INFO_FLASH and SCARLETT2_USB_INFO_SEGMENT to find
the App_Settings and App_Upgrade flash segment numbers, and store them
in the scarlett2_data struct. These will be used later to implement
reset to factory defaults and firmware upgrade functions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/70f0108a9cf99b69f7aa920c4bcdb0cf4bf3da98.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensure the value passed to scarlett2_mixer_ctl_put() is between 0 and
SCARLETT2_MIXER_MAX_VALUE so we don't attempt to access outside
scarlett2_mixer_values[].
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/3b19fb3da641b587749b85fe1daa1b4e696c0c1b.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The *_ctl_get() functions which call scarlett2_update_*() were not
checking the return value. Fix to check the return value and pass to
the caller.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/32a5fdc83b05fa74e0fcdd672fbf71d75c5f0a6d.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_usb_set_config() calls scarlett2_usb_get() but was not
checking the result. Return the error if it fails rather than
continuing with an invalid value.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e15fae6c5 ("ALSA: usb-audio: scarlett2: Allow bit-level access to config")
Link: https://lore.kernel.org/r/def110c5c31dbdf0a7414d258838a0a31c0fab67.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_config_save() was ignoring the return value from
scarlett2_usb(). As this function is not called from user-space we
can't return the error, so call usb_audio_err() instead.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/bf0a15332d852d7825fa6da87d2a0d9c0b702053.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add missing conversion from little-endian data to CPU-endian in
scarlett2_usb_get_meter_levels().
Fixes: 3473185f31 ("ALSA: scarlett2: Remap Level Meter values")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZYsBIE3DSKdi4YC/@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Increase the quirk delay from 2 seconds to 4 seconds. This reflects a
change in the Windows driver in which the delay was increased to about
3.7 seconds. The larger delay fixes an issue where the device fails to
work unless it was powered up early during boot.
Also clarify in the quirk comment that the quirk is only applied to
older devices (USB ID 07fd:0008).
Signed-off-by: Jeremie Knuesel <knuesel@gmail.com>
Suggested-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211975
Link: https://lore.kernel.org/r/20231217112243.33409-1-knuesel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These values mirror those of the Pioneer DJM-250MK2 as the channel layout
appears identical based on my observations. This duplication could be removed in
later contributions if desired.
Signed-off-by: Sarah Grant <s@srd.tw>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_add_firmware_version_ctl() may return an error, but the
return value was not being checked. Add the missing check.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 701949cc01 ("ALSA: scarlett2: Add support for reading firmware version")
Link: https://lore.kernel.org/r/ZTuKcXajVnuelBEb@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The values previously returned by the Level Meter control were passed
through from the interface without interpretation, but it has been
discovered that the order of the values matches the mux assignment
order (which is not presented to userspace). In addition, the values
for disabled mux outputs, and mux outputs which share a source are
invalid.
This patch adds a per-device meter_map[], and a dynamic
meter_level_map[] which is updated on routing changes. The meter level
map gets used by scarlett2_meter_ctl_get() to both present the values
in a standard order, and to fix up the invalid values by zeroing them
(for disabled outputs) and copying them (for mux outputs which share a
source).
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/d437ace603eff685d2e0c3d0960589d7a09dd647.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Line outputs 3 & 4 on the Gen 3 18i8 are internally the analogue 7 and
8 outputs, and this renumbering is hidden from the user by
line_out_remap(). By allowing higher values (representing non-analogue
outputs) to be passed to line_out_remap(), repeated code from
scarlett2_mux_src_enum_ctl_get() and scarlett2_mux_src_enum_ctl_put()
can be removed.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/3b70267931f5994628ab27306c73cddd17b93c8f.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 84 bytes read during initialisation step 2 were previously
ignored. This patch retrieves the firmware version from bytes 8-11,
stores it in the scarlett2_data struct, and makes it available
through a new control "Firmware Version".
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/e76cd80c3445769e60c95df12c4635fc8abfe5c7.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The config sets are named NO_MIXER, GEN_2, GEN_3, and CLARETT
currently. Rename NO_MIXER and GEN_3 to GEN_3A and GEN_3B respectively
as NO_MIXER is only for the smaller Gen 3 devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/19ae5eea7fc499945efa8eeda7fcd8afe73f62d9.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This driver was originally developed for the Focusrite Scarlett Gen 2
series. Since then Focusrite have used a similar protocol for their
Gen 3, Gen 4, Clarett USB, Clarett+, and Vocaster series.
Let's call this common protocol the "Scarlett 2 Protocol" and rename
the driver to scarlett2 to not imply that it is restricted to Gen 2
series devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/e1ad7f69a1e20cdb39094164504389160c1a0a0b.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
McIntosh devices supporting native DSD require the feature to be
explicitly exposed. Add a flag that fixes an issue where DSD audio was
defaulting to DSD over PCM instead of delivering raw DSD data.
Signed-off-by: Max McCarthy <mmccarthy@mcintoshlabs.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BL0PR13MB4433226005162D186A8DFF4AD6DFA@BL0PR13MB4433.namprd13.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I own an external usb Webcam, model NexiGo N930AF, which had low mic volume and
inconsistent sound quality. Video works as expected.
(snip)
[ +0.047857] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ +0.003406] usb 5-1: New USB device found, idVendor=1bcf, idProduct=2283, bcdDevice=12.17
[ +0.000007] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000004] usb 5-1: Product: NexiGo N930AF FHD Webcam
[ +0.000003] usb 5-1: Manufacturer: SHENZHEN AONI ELECTRONIC CO., LTD
[ +0.000004] usb 5-1: SerialNumber: 20201217011
[ +0.003900] usb 5-1: Found UVC 1.00 device NexiGo N930AF FHD Webcam (1bcf:2283)
[ +0.025726] usb 5-1: 3:1: cannot get usb sound sample rate freq at ep 0x86
[ +0.071482] usb 5-1: 3:2: cannot get usb sound sample rate freq at ep 0x86
[ +0.004679] usb 5-1: 3:3: cannot get usb sound sample rate freq at ep 0x86
[ +0.051607] usb 5-1: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
[ +0.000005] usb 5-1: [7] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
Set up quirk cval->res to 16 for 256 levels,
Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate.
Confirmed that happened anyway later due to the backoff mechanism, after 3 failures
All audio stream on device interfaces share the same values,
apart from wMaxPacketSize and tSamFreq :
(snip)
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 8
bDelay 1 frames
wFormatTag 0x0001 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 44100
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x005c 1x 92 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioStreaming Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0x0000
(snip)
Based on the usb data about manufacturer, SPCA2281B3 is the most likely controller IC
Manufacturer does not provide link for datasheet nor detailed specs.
No way to confirm if the firmware supports any other way of getting the sample rate.
Testing patch provides consistent good sound recording quality and volume range.
(snip)
[ +0.045764] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ +0.106290] usb 5-1: New USB device found, idVendor=1bcf, idProduct=2283, bcdDevice=12.17
[ +0.000006] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000004] usb 5-1: Product: NexiGo N930AF FHD Webcam
[ +0.000003] usb 5-1: Manufacturer: SHENZHEN AONI ELECTRONIC CO., LTD
[ +0.000004] usb 5-1: SerialNumber: 20201217011
[ +0.043700] usb 5-1: set resolution quirk: cval->res = 16
[ +0.002585] usb 5-1: Found UVC 1.00 device NexiGo N930AF FHD Webcam (1bcf:2283)
Signed-off-by: Christos Skevis <xristos.thes@gmail.com>
Link: https://lore.kernel.org/r/20231006155330.399393-1-xristos.thes@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It has been confirmed that all devices in the Focusrite Clarett USB
series work the same as the devices in the Clarett+ series. Add the
missing PIDs to enable support for the Clarett 2Pre and 4Pre USB.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZSFB8EVTG1PK1eq/@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Focusrite Clarett+ series uses the same protocol as the Scarlett
Gen 2 and Gen 3 series. This patch adds support for the Clarett+ 2Pre
and Clarett+ 4Pre similarly to the existing 8Pre support by adding
appropriate entries to the scarlett2 driver.
The Clarett 2Pre USB and 4Pre USB presumably use the same protocol as
well, so support for them can easily be added if someone can test.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZRL7qjC3tYQllT3H@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
