The code indicates that journal_init_common() fills the journal_t object
it returns while the comment incorrectly states that only a few fields are
initialised. Also, the comment claims that journal structures could be
created from scratch which isn't possible as journal_init_common() calls
journal_load_superblock() which loads and checks journal superblock from
disk.
Signed-off-by: Daniel Martín Gómez <dalme@riseup.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20241107144538.3544-1-dalme@riseup.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The b_frozen_data allocation should not be failed during journal
committing process, otherwise jbd2 will abort.
Since commit 490c1b444ce653d("jbd2: do not fail journal because of
frozen_buffer allocation failure") already added '__GFP_NOFAIL' flag
in do_get_write_access(), just add '__GFP_NOFAIL' flag for all allocations
in jbd2_journal_write_metadata_buffer(), like 'new_bh' allocation does.
Besides, remove all error handling branches for do_get_write_access().
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20241012085530.2147846-1-chengzhihao@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Keep 'success' internally to track if any error happened and then
return it at the end in do_one_pass(). If jbd2_do_replay() return
-ENOMEM then stop replay journal.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240930005942.626942-7-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The judgement 'if (block_error && success == 0)' is never valid. Just
remove useless 'block_error' variable.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-6-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out jbd2_do_replay() no funtional change.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240930005942.626942-5-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To make JBD2_COMMIT_BLOCK process more clean, no functional change.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-4-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now buffer_head free is very fragmented in do_one_pass(), unified release
of buffer_head in do_one_pass()
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
'need_check_commit_time' is only used by v2/v3 checksum, so there isn't
need to add 'need_check_commit_time' judegement for v1 checksum logic.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Simply return -EINVAL if j_fc_off is invalid to avoid repeated check of
ret.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240801013815.2393869-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After jbd2_mark_journal_empty, journal log is supposed to be empty.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240801013815.2393869-8-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move escape handle to futher improve code readability and remove some
repeat check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240801013815.2393869-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It's more intuitive to use jh_in->b_frozen_data directly instead of
done_copy_out variable. Simply remove unneeded done_copy_out variable
and use b_frozen_data instead.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240801013815.2393869-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove kmap for page of b_frozen_data from jbd2_alloc() which always
provides an address from the direct kernel mapping.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240801013815.2393869-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unused return value of jbd2_fc_release_bufs.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240801013815.2393869-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We will alloc journal_head with __GFP_NOFAIL anyway, test for failure
is pointless.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240801013815.2393869-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Function jbd2_journal_shrink_checkpoint_list() assumes that '0' is not a
valid value for transaction IDs, which is incorrect. Don't assume that and
use two extra boolean variables to control the loop iterations and keep
track of the first and last tid.
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240724161119.13448-4-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Function __jbd2_log_wait_for_space() assumes that '0' is not a valid value
for transaction IDs, which is incorrect. Don't assume that and invoke
jbd2_log_wait_commit() if the journal had a committing transaction instead.
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240724161119.13448-3-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail()
to recover some journal space. But if an error occurs while executing
jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free
space right away, we try other branches, and if j_committing_transaction
is NULL (i.e., the tid is 0), we will get the following complain:
============================================
JBD2: I/O error when updating journal superblock for sdd-8.
__jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available
__jbd2_log_wait_for_space: no way to get more journal space in sdd-8
------------[ cut here ]------------
WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0
Modules linked in:
CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1
RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0
Call Trace:
<TASK>
add_transaction_credits+0x5d1/0x5e0
start_this_handle+0x1ef/0x6a0
jbd2__journal_start+0x18b/0x340
ext4_dirty_inode+0x5d/0xb0
__mark_inode_dirty+0xe4/0x5d0
generic_update_time+0x60/0x70
[...]
============================================
So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to
clean up at the moment, continue to try to reclaim free space in other ways.
Note that this fix relies on commit 6f6a6fda29 ("jbd2: fix ocfs2 corrupt
when updating journal superblock fails") to make jbd2_cleanup_journal_tail
return the correct error code.
Fixes: 8c3f25d895 ("jbd2: don't give up looking for space so easily in __jbd2_log_wait_for_space")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240718115336.2554501-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When a full journal commit is on-going, any fast commit has to be enqueued
into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing
is done only once, i.e. if an inode is already queued in a previous fast
commit entry it won't be enqueued again. However, if a full commit starts
_after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to
be done into FC_Q_STAGING. And this is not being done in function
ext4_fc_track_template().
This patch fixes the issue by re-enqueuing an inode into the STAGING queue
during the fast commit clean-up callback when doing a full commit. However,
to prevent a race with a fast-commit, the clean-up callback has to be called
with the journal locked.
This bug was found using fstest generic/047. This test creates several 32k
bytes files, sync'ing each of them after it's creation, and then shutting
down the filesystem. Some data may be loss in this operation; for example a
file may have it's size truncated to zero.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240717172220.14201-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Originally, we were quite conservative in limiting maximum transaction
size to a quarter of the journal because we were not accounting
transaction descriptor and revoke blocks. These days we do properly
account them and reserve space for them from the total transaction
credits. Thus there's no need to be so conservative and we can increase
the maximum transaction size to one third of the journal (even half
should work fine in principle but the performance will likely suffer in
that case). This also fixes failures to grow filesystems with tiny
journals.
Link: CA+hUFcuGs04JHZ_WzA1zGN57+ehL2qmHOt5a7RMpo+rv6Vyxtw@mail.gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240701132800.7158-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In jbd2_journal_init_common() we set batch size of a shrinker shrinking
checkpointed buffers to journal->j_max_transaction_buffers. But that is
guaranteed to be 0 at that point so we effectively stay with the default
shrinker batch size of 128. It has been like this since introduction of
jbd2 shrinkers so just drop the pointless initialization.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240624170127.3253-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 9f356e5a4f ("jbd2: Account descriptor blocks into
t_outstanding_credits") started to account descriptor blocks into
transactions outstanding credits. However it didn't appropriately
decrease the maximum amount of credits available to userspace. Thus if
the filesystem requests a transaction smaller than
j_max_transaction_buffers but large enough that when descriptor blocks
are added the size exceeds j_max_transaction_buffers, we confuse
add_transaction_credits() into thinking previous handles have grown the
transaction too much and enter infinite journal commit loop in
start_this_handle() -> add_transaction_credits() trying to create
transaction with enough credits available.
Fix the problem by properly accounting for transaction space reserved
for descriptor blocks when verifying requested transaction handle size.
CC: stable@vger.kernel.org
Fixes: 9f356e5a4f ("jbd2: Account descriptor blocks into t_outstanding_credits")
Reported-by: Alexander Coffin <alex.coffin@maticrobots.com>
Link: https://lore.kernel.org/all/CA+hUFcuGs04JHZ_WzA1zGN57+ehL2qmHOt5a7RMpo+rv6Vyxtw@mail.gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240624170127.3253-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of computing the number of descriptor blocks a transaction can
have each time we need it (which is currently when starting each
transaction but will become more frequent later) precompute the number
once during journal initialization together with maximum transaction
size. We perform the precomputation whenever journal feature set is
updated similarly as for computation of
journal->j_revoke_records_per_block.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240624170127.3253-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There's no reason to have jbd2_journal_get_max_txn_bufs() public
function. Currently all users are internal and can use
journal->j_max_transaction_buffers instead. This saves some unnecessary
recomputations of the limit as a bonus which becomes important as this
function gets more complex in the following patch.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240624170127.3253-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We encountered a problem that the file system could not be mounted in
the power-off scenario. The analysis of the file system mirror shows that
only part of the data is written to the last commit block.
The valid data of the commit block is concentrated in the first sector.
However, the data of the entire block is involved in the checksum calculation.
For different hardware, the minimum atomic unit may be different.
If the checksum of a committed block is incorrect, clear the data except the
'commit_header' and then calculate the checksum. If the checkusm is correct,
it is considered that the block is partially committed, Then continue to replay
journal.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240620072405.3533701-1-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_transaction_committed() is used to check whether a transaction with
the given tid has already committed, it holds j_state_lock in read mode
and check the tid of current running transaction and committing
transaction, but holding the j_state_lock is expensive.
We have already stored the sequence number of the most recently
committed transaction in journal t->j_commit_sequence, we could do this
check by comparing it with the given tid instead. If the given tid isn't
smaller than j_commit_sequence, we can ensure that the given transaction
has been committed. That way we could drop the expensive lock and
achieve about 10% ~ 20% performance gains in concurrent DIOs on may
virtual machine with 100G ramdisk.
fio -filename=/mnt/foo -direct=1 -iodepth=10 -rw=$rw -ioengine=libaio \
-bs=4k -size=10G -numjobs=10 -runtime=60 -overwrite=1 -name=test \
-group_reporting
Before:
overwrite IOPS=88.2k, BW=344MiB/s
read IOPS=95.7k, BW=374MiB/s
rand overwrite IOPS=98.7k, BW=386MiB/s
randread IOPS=102k, BW=397MiB/s
After:
overwrite IOPS=105k, BW=410MiB/s
read IOPS=112k, BW=436MiB/s
rand overwrite IOPS=104k, BW=404MiB/s
randread IOPS=111k, BW=432MiB/s
CC: Dave Chinner <david@fromorbit.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Link: https://lore.kernel.org/linux-ext4/ZjILCPNZRHeazSqV@dread.disaster.area/
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20240520131831.2910790-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We only need to sleep if no running transaction is expired. Simply remove
unnecessary "should_sleep".
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-10-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We always set JBD2_UNMOUNT with j_state_lock held in journal_kill_thread.
In kjournald2, we check JBD2_UNMOUNT flag two times under the same
j_state_lock. Then the second check is unnecessary.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The j_commit_[sequence/request] are updated with j_state_lock held during
runtime. In kjournald2, two equality checks of j_commit_[sequence/request]
are under the same j_state_lock, then the second check is unnecessary.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-8-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We save jh2bh(jh_in) to bh_in, so use bh_in directly instead of
jh2bh(jh_in) to simplify the code.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The data to do escape could be accessed directly from b_frozen_data,
just remove unneeded kmap.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If b_frozen_data is created concurrently, we can update new_folio and
new_offset with b_frozen_data and then move forward
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As we only need to copy out when we should do escape, need_copy_out
could be simply replaced by "do_escape".
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The done_copy_out info from jbd2_journal_write_metadata_buffer is not
used. Simply remove it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The new_bh is from alloc_buffer_head, we should call free_buffer_head to
free it in error case.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replacement of bdev->bd_inode with sane(r) set of primitives.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkwjlgAKCRBZ7Krx/gZQ
66OmAP9nhZLASn/iM2+979I6O0GW+vid+uLh48uW3d+LbsmVIgD9GYpR+cuLQ/xj
mJESWfYKOVSpFFSrqlzKg9PQlU/GFgs=
=6LRp
-----END PGP SIGNATURE-----
Merge tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bdev bd_inode updates from Al Viro:
"Replacement of bdev->bd_inode with sane(r) set of primitives by me and
Yu Kuai"
* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RIP ->bd_inode
dasd_format(): killing the last remaining user of ->bd_inode
nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
block/bdev.c: use the knowledge of inode/bdev coallocation
gfs2: more obvious initializations of mapping->host
fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
grow_dev_folio(): we only want ->bd_inode->i_mapping there
use ->bd_mapping instead of ->bd_inode->i_mapping
block_device: add a pointer to struct address_space (page cache of bdev)
missing helpers: bdev_unhash(), bdev_drop()
block: move two helpers into bdev.c
block2mtd: prevent direct access of bd_inode
dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
blkdev_write_iter(): saner way to get inode and bdev
bcachefs: remove dead function bdev_sectors()
ext4: remove block_device_ejected()
erofs_buf: store address_space instead of inode
erofs: switch erofs_bread() to passing offset instead of block number
As 'shrink_type' is exported. The module prefix 'jbd2' is added to
distinguish from memory reclamation.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20240407065355.1528580-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
"enum shrink_type" can clearly express the meaning of the parameter of
__jbd2_journal_clean_checkpoint_list(), and there is no need to use the
bool type.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20240407065355.1528580-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The variable err is being assigned a value that is never read, it
is being re-assigned inside the following while loop and also
after the while loop. The assignment is redundant and can be
removed.
Cleans up clang scan build warning:
fs/jbd2/commit.c:574:2: warning: Value stored to 'err' is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240410112803.232993-1-colin.i.king@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is a replacement solution of commit bc71726c72 ("ext4: abort
the filesystem if failed to async write metadata buffer"), JBD2 can
detect metadata writeback error of fs dev by 'j_fs_dev_wb_err'.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-5-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since 'JBD2_CHECKPOINT_IO_ERROR' and j_atomic_flags' are not useful
anymore after fs dev's errseq is imported into jbd2, just remove them.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-4-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now JBD2 detects metadata writeback error of fs dev according to errseq.
Replace journal state flag by checking errseq.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-3-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add errseq in journal, so that JBD2 can detect whether metadata is
successfully written to fs bdev. This patch adds detection in recovery
process to replace original solution(using local variable wb_err).
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-2-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There's issue when do io test:
WARN: soft lockup - CPU#45 stuck for 11s! [jbd2/dm-2-8:4170]
CPU: 45 PID: 4170 Comm: jbd2/dm-2-8 Kdump: loaded Tainted: G OE
Call trace:
dump_backtrace+0x0/0x1a0
show_stack+0x24/0x30
dump_stack+0xb0/0x100
watchdog_timer_fn+0x254/0x3f8
__hrtimer_run_queues+0x11c/0x380
hrtimer_interrupt+0xfc/0x2f8
arch_timer_handler_phys+0x38/0x58
handle_percpu_devid_irq+0x90/0x248
generic_handle_irq+0x3c/0x58
__handle_domain_irq+0x68/0xc0
gic_handle_irq+0x90/0x320
el1_irq+0xcc/0x180
queued_spin_lock_slowpath+0x1d8/0x320
jbd2_journal_commit_transaction+0x10f4/0x1c78 [jbd2]
kjournald2+0xec/0x2f0 [jbd2]
kthread+0x134/0x138
ret_from_fork+0x10/0x18
Analyzed informations from vmcore as follows:
(1) There are about 5k+ jbd2_inode in 'commit_transaction->t_inode_list';
(2) Now is processing the 855th jbd2_inode;
(3) JBD2 task has TIF_NEED_RESCHED flag;
(4) There's no pags in address_space around the 855th jbd2_inode;
(5) There are some process is doing drop caches;
(6) Mounted with 'nodioread_nolock' option;
(7) 128 CPUs;
According to informations from vmcore we know 'journal->j_list_lock' spin lock
competition is fierce. So journal_finish_inode_data_buffers() maybe process
slowly. Theoretically, there is scheduling point in the filemap_fdatawait_range_keep_errors().
However, if inode's address_space has no pages which taged with PAGECACHE_TAG_WRITEBACK,
will not call cond_resched(). So may lead to soft lockup.
journal_finish_inode_data_buffers
filemap_fdatawait_range_keep_errors
__filemap_fdatawait_range
while (index <= end)
nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index, end, PAGECACHE_TAG_WRITEBACK);
if (!nr_pages)
break; --> If 'nr_pages' is equal zero will break, then will not call cond_resched()
for (i = 0; i < nr_pages; i++)
wait_on_page_writeback(page);
cond_resched();
To solve above issue, add scheduling point in the journal_finish_inode_data_buffers();
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231211112544.3879780-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Current jbd2 only add REQ_SYNC for descriptor block, metadata log
buffer, commit buffer and superblock buffer, the submitted IO could be
throttled by writeback throttle in block layer, that could lead to
priority inversion in some cases. The log IO looks like a kind of high
priority metadata IO, so it should not be throttled by WBT like QOS
policies in block layer, let's add REQ_SYNC | REQ_IDLE to exempt from
writeback throttle, and also add REQ_META together indicates it's a
metadata IO.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231129114740.2686201-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The write_flags print in the trace of jbd2_write_superblock() is not
real, so move the modification before the trace.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231129114740.2686201-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
