LoongArch KVM changes for v6.12
1. Revert qspinlock to test-and-set simple lock on VM.
2. Add Loongson Binary Translation extension support.
3. Add PMU support for guest.
4. Enable paravirt feature control from VMM.
5. Implement function kvm_para_has_feature().
KVM/arm64 updates for 6.12
* New features:
- Add a Stage-2 page table dumper, reusing the main ptdump
infrastructure, and allowing easier debugging of the our
page-table infrastructure
- Add FP8 support to the KVM/arm64 floating point handling.
- Add NV support for the AT family of instructions, which mostly
results in adding a page table walker that deals with most of the
complexity of the architecture.
* Improvements, fixes and cleanups:
- Add selftest checks for a bunch of timer emulation corner cases
- Fix the multiple of cases where KVM/arm64 doesn't correctly handle
the guest trying to use a GICv3 that isn't advertised
- Remove REG_HIDDEN_USER from the sysreg infrastructure, making
things little more simple
- Prevent MTE tags being restored by userspace if we are actively
logging writes, as that's a recipe for disaster
- Correct the refcount on a page that is not considered for MTE tag
copying (such as a device)
- Relax the synchronisation when walking a page table to split block
mappings, moving it at the end the walk, as there is no need to
perform it on every store.
- Fix boundary check when transfering memory using FFA
- Fix pKVM TLB invalidation, only affecting currently out of tree
code but worth addressing for peace of mind
MD Danish Anwar says:
====================
Introduce HSR offload support for ICSSG
This series introduces HSR offload support for ICSSG driver. To support HSR
offload to hardware, ICSSG HSR firmware is used.
This series introduces,
1. HSR frame offload support for ICSSG driver.
2. HSR Tx Packet duplication offload
3. HSR Tx Tag and Rx Tag offload
4. Multicast filtering support in HSR offload mode.
5. Dependencies related to IEP.
HSR Test Setup:
--------------
___________ ___________ ___________
| | Link AB | | Link BC | |
__| AM64* |_________| AM64 |_________| AM64* |___
| | Station A | | Station B | | Station C | |
| |___________| |___________| |___________| |
| |
|______________________________________________________________|
Link CA
*Could be any device that supports two ethernet interfaces.
Steps to switch to HSR frame forward offload mode:
-------------------------------------------------
Example assuming eth1, eth2 ports of ICSSG1 on AM64-EVM
1) Enable HSR offload for both interfaces
ethtool -K eth1 hsr-fwd-offload on
ethtool -K eth1 hsr-dup-offload on
ethtool -K eth1 hsr-tag-ins-offload on
ethtool -K eth1 hsr-tag-rm-offload on
ethtool -K eth2 hsr-fwd-offload on
ethtool -K eth2 hsr-dup-offload on
ethtool -K eth2 hsr-tag-ins-offload on
ethtool -K eth2 hsr-tag-rm-offload on
2) Create HSR interface and add slave interfaces to it
ip link add name hsr0 type hsr slave1 eth1 slave2 eth2 \
supervision 45 version 1
3) Add IP address to the HSR interface
ip addr add <IP_ADDR>/24 dev hsr0
4) Bring up the HSR interface
ip link set hsr0 up
Switching back to previous mode:
--------------------------------
1) Delete HSR interface
ip link delete hsr0
2) Disable HSR port-to-port offloading mode, packet duplication
ethtool -K eth1 hsr-fwd-offload off
ethtool -K eth1 hsr-dup-offload off
ethtool -K eth1 hsr-tag-ins-offload off
ethtool -K eth1 hsr-tag-rm-offload off
ethtool -K eth2 hsr-fwd-offload off
ethtool -K eth2 hsr-dup-offload off
ethtool -K eth2 hsr-tag-ins-offload off
ethtool -K eth2 hsr-tag-rm-offload off
Testing the port-to-port frame forward offload feature:
-----------------------------------------------------
1) Connect the LAN cables as shown in the test setup.
2) Configure Station A and Station C in HSR non-offload mode.
3) Configure Station B is HSR offload mode.
4) Since HSR is a redundancy protocol, disconnect cable "Link CA",
to ensure frames from Station A reach Station C only through
Station B.
5) Run iperf3 Server on Station C and client on station A.
7) Check the CPU usage on Station B.
CPU usage report on Station B using mpstat when running UDP iperf3:
-------------------------------------------------------------------
1) Non-Offload case
-------------------
CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
all 0.00 0.00 0.50 0.00 3.52 29.15 0.00 0.00 66.83
0 0.00 0.00 0.00 0.00 7.00 58.00 0.00 0.00 35.00
1 0.00 0.00 0.99 0.00 0.99 0.00 0.00 0.00 98.02
2) Offload case
---------------
CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
all 0.00 0.00 0.00 0.00 0.50 0.00 0.00 0.00 99.50
0 0.00 0.00 0.99 0.00 0.00 0.00 0.00 0.00 99.01
1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00
Note:
1) At the very least, hsr-fwd-offload must be enabled.
Without offloading the port-to-port offload, other
HSR offloads cannot be enabled.
2) hsr-tag-ins-offload and hsr-dup-offload are tightly coupled in
the firmware implementation. They both need to be enabled / disabled
together.
v1: https://lore.kernel.org/20240808110800.1281716-1-danishanwar@ti.com/
v2: https://lore.kernel.org/20240813074233.2473876-1-danishanwar@ti.com
v3: https://lore.kernel.org/20240828091901.3120935-1-danishanwar@ti.com/
v4: https://lore.kernel.org/20240904100506.3665892-1-danishanwar@ti.com/
v5: https://lore.kernel.org/20240906111538.1259418-1-danishanwar@ti.com/
[0] https://lore.kernel.org/202409061658.vSwcFJiK-lkp@intel.com/
[1] https://lore.kernel.org/20240828091901.3120935-5-danishanwar@ti.com/
[2] https://lore.kernel.org/20240828091901.3120935-7-danishanwar@ti.com/
[3] https://lore.kernel.org/20240813074233.2473876-2-danishanwar@ti.com/
[4] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=e846be0fba85
====================
Link: https://patch.msgid.link/20240911081603.2521729-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The HSR stack allows to offload its Tx packet duplication functionality to
the hardware. Enable this offloading feature for ICSSG driver. Add support
to offload HSR Tx Tag Insertion and Rx Tag Removal and duplicate discard.
hsr tag insertion offload and hsr dup offload are tightly coupled in
firmware implementation. Both these features need to be enabled / disabled
together.
Duplicate discard is done as part of RX tag removal and it is
done by the firmware. When driver sends the r30 command
ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware does RX tag removal as well as
duplicate discard.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240911081603.2521729-5-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for offloading HSR port-to-port frame forward to hardware.
When the slave interfaces are added to the HSR interface, the PRU cores
will be stopped and ICSSG HSR firmwares will be loaded to them.
Similarly, when HSR interface is deleted, the PRU cores will be
restarted and the last used firmwares will be reloaded. PRUeth
interfaces will be back to the last used mode.
This commit also renames some APIs that are common between switch and
hsr mode with '_fw_offload' suffix.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240911081603.2521729-4-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The def_inc is stored in icss_iep structure. Currently default increment
(ns per clock tick) is hardcoded to 4 (Clock frequency being 250 MHz).
Change this to use the iep->def_inc variable as the iep structure is now
accessible to the driver files.
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240911081603.2521729-3-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move icss_iep structure definition and to icss_iep.h file so that the
structure members can be used / accessed by all icssg driver files.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240911081603.2521729-2-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix flash probing by name. Flash entries without a name are allowed
since commit 15eb8303bb ("mtd: spi-nor: mark the flash name as
obsolete"). But it was just until recently that a flash entry without a
name was actually introduced. This triggers a bug in the legacy probe by
name path. Skip entries without a name to fix it.
Fixes: 2095e7da8049 ("mtd: spi-nor: spansion: Add support for S28HS256T")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/r/66c8ebb0-1324-4ad9-9926-8d4eb7e1e63a@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240909072854.812206-1-mwalle@kernel.org
These flash chips are used on Google / TP-Link / ASUS OnHub devices, and
OnHub devices are write-protected by default (same as any other
ChromeOS/Chromebook system). I've referred to datasheets, and tested on
OnHub devices.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240726185825.142733-1-computersforpeace@gmail.com
Writing to the Flash in `sst_nor_write()` is a 3-step process:
first an optional one-byte write to get 2-byte-aligned, then the
bulk of the data is written out in vendor-specific 2-byte writes.
Finally, if there's a byte left over, another one-byte write.
This was implemented 3 times in the body of `sst_nor_write()`.
To reduce code duplication, factor out these sub-steps to their
own function.
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
[pratyush@kernel.org: fixup whitespace, use %zu instead of %i in WARN()]
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240710091401.1282824-1-csokas.bence@prolan.hu
- One Intel patch that I mistakedly merged into for-next
despite it belongs in fixes: add Arrow Lake-H/U ACPI
ID so this Arrow Lake chip probes.
- One fix making the CY895x0 reg cache work, which is
good because it makes the device work too.
-----BEGIN PGP SIGNATURE-----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=USa2
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- One Intel patch that I mistakenly merged into for-next despite it
belonging in fixes: add Arrow Lake-H/U ACPI ID so this Arrow Lake
chip probes.
- One fix making the CY895x0 reg cache work, which is good because it
makes the device work too.
* tag 'pinctrl-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: pinctrl-cy8c95x0: Fix regcache
pinctrl: meteorlake: Add Arrow Lake-H/U ACPI ID
A few last-minute ASoC fixes and MAINTAINERS update.
All look small, obvious and nice-to-have fixes for 6.11-final.
-----BEGIN PGP SIGNATURE-----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=GUM8
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few last-minute ASoC fixes and MAINTAINERS update.
All look small, obvious and nice-to-have fixes for 6.11-final"
* tag 'sound-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: meson: axg-card: fix 'use-after-free'
ASoC: codecs: avoid possible garbage value in peb2466_reg_read()
MAINTAINERS: update Pierre Bossart's email and role
ASoC: tas2781: fix to save the dsp bin file name into the correct array in case name_prefix is not NULL
ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item
ASoC: Intel: soc-acpi-intel-lnl-match: add missing empty item
Temp channel 0 aka temp1 can have a temp1_max_alarm attribute for
power_supply devices which have a POWER_SUPPLY_PROP_TEMP_ALERT_MAX
property.
HWMON_T_MAX_ALARM was missing from power_supply_hwmon_info for
temp channel 0, causing the hwmon temp1_max_alarm attribute to be
missing from such power_supply devices.
Add this to power_supply_hwmon_info to fix this.
Fixes: f1d33ae806 ("power: supply: remove duplicated argument in power_supply_hwmon_info")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240908185337.103696-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
power_supply_property_is_writeable() gets called from the is_visible()
callback for the sysfs attributes of power_supply class devices and for
the sysfs attributes of power_supply core instantiated hwmon class devices.
These sysfs attributes get registered by the device_add() respectively
power_supply_add_hwmon_sysfs() calls in power_supply_register().
use_cnt gets initialized to 0 and is incremented only after these calls.
So when power_supply_property_is_writeable() gets called it always return
-ENODEV because of use_cnt == 0.
This causes all the attributes to have permissions of 444 even those which
should be writable. This used to be a problem only for hwmon sysfs
attributes but since commit be6299c6e5 ("power: supply: sysfs: use
power_supply_property_is_writeable()") this now also impacts power_supply
class sysfs attributes.
Fixes: be6299c6e5 ("power: supply: sysfs: use power_supply_property_is_writeable()")
Fixes: e67d4dfc9f ("power: supply: Add HWMON compatibility layer")
Cc: stable@vger.kernel.org
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/stable/20240908185337.103696-1-hdegoede%40redhat.com
Link: https://lore.kernel.org/r/20240908185337.103696-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbko34ACgkQJNaLcl1U
h9CQiwf9HseC6VkNQ0ISVZ2UsSf8K/HsHsdBGl7/CRr0SEvS3pszYMkKPbhRggsF
aQ4nfitXeN7Vo6S0tNXx63wzjpMPkjrHdV0XY+WJxfuCaeb3DHFEJ4uvlgv53aoh
M+wz1aldvKWjDPwhkzcJEaneQ36U7OlUSBsbFHR82dBDguEm+h29tAxTuLlwL5Zb
M8NuSfbh0cfY9Kk1cPGsqaHD8wjUeg6/Q5qnbDg2kAm0aF1fAxfyFKRX6Z5s9ekd
LeU3EIdRbI8UlHv7Afl0UKDYtYqL1ubwmjDb45HnsE4FmNEmDEbf8c1adRumZAjm
Js9yzswiaaHAvotCaEstFC6HYUL+oQ==
=jugn
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
A few last minute fixes, plus an update for Pierre's contact details and
status. It'd be good to get these into v6.11 (especially the
MAINTAINERS update) but it wouldn't be the end of the world if they
waited for the merge window, none of them are super remarkable and it's
just a question of timing that they're last minute.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbkhH0ACgkQJNaLcl1U
h9BoIQf+JXnJ0ue9/Jk/jMrXm9IsbXFV0ejhRX1+QYNVsucMymoqPl3mlK0gklFi
j16V7P6aNUnm0Z8eOct24T/5INKiwBIWQH3FdnzHbMhf7xswIHBittMk9A0T5twH
l+RWeYRjCE6YCuGnnWGC33j+0itN5cQLI0lP4bStJxiWV+uxUOk7QK12legYoWNG
rvboiJIxBAJ04xogCIXNeTQmaxOU6GTvuoD/yz+e4G0+UDET1nijRpfTcJLs1Vam
ngebgCrkBG2nOk9z5p1FEt85ullp34H6SNQ9b+tChsrKH/RPEcqk3iWrOHUApYON
82tj9pCZq9mbeqZJSseWnvyhPm7uOw==
=BJvu
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.11-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
A few last minute fixes, plus an update for Pierre's contact details and
status. It'd be good to get these into v6.11 (especially the
MAINTAINERS update) but it wouldn't be the end of the world if they
waited for the merge window, none of them are super remarkable and it's
just a question of timing that they're last minute.
A dedicated mail list has been created for Linux kernel memory model
discussion, which could help people more easily track memory model
related discussions. This could also help bring memory model discussions
to a broader audience. Therefore, add the list information to the LKMM
maintainers entry.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Commit 8ca924aeb4 ("Documentation/barriers: Remove references to
[smp_]read_barrier_depends()") removed the entire section of "CACHE
COHERENCY", without getting rid of its traces.
Remove them.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
There has never been recipes-paris.txt at least since v5.11.
Fix the typo.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
locking.txt and glossary.txt have been in LKMM's documentation for
quite a while.
Add them in README's introduction of docs and the list of docs at the
bottom. Add access-marking.txt in the former as well.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The Linux-kernel memory model (LKMM) source code and the herd7 tool are
closely linked in that the latter is responsible for (pre)processing
each C-like macro of a litmus test, and for providing the LKMM with a
set of events, or "representation", corresponding to the given macro.
This commit therefore provides herd-representation.txt to document
the representations of the concurrency macros, following their
"classification" in Documentation/atomic_t.txt.
Link: https://lore.kernel.org/all/ZnFZPJlILp5B9scN@andrea/
Suggested-by: Hernan Ponce de Leon <hernan.poncedeleon@huaweicloud.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Hernan Ponce de Leon <hernan.poncedeleon@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Ray Zhang reported ksmbd can not create file if parent filename is
caseless.
Y:\>mkdir A
Y:\>echo 123 >a\b.txt
The system cannot find the path specified.
Y:\>echo 123 >A\b.txt
This patch convert name obtained by caseless lookup to parent name.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Ray Zhang <zhanglei002@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some file systems may not provide dot (.) and dot-dot (..) as they are
optional in POSIX. ksmbd can misjudge emptiness of a directory in those
file systems, since it assumes there are always at least two entries:
dot and dot-dot.
Just don't count dot and dot-dot.
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Hobin Woo <hobin.woo@samsung.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When sending an oplock break request, opinfo->conn is used,
But freed ->conn can be used on multichannel.
This patch add a reference count to the ksmbd_conn struct
so that it can be freed when it is no longer used.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows client write with FILE_APPEND_DATA when using git.
ksmbd should allow write it with this flags.
Z:\test>git commit -m "test"
fatal: cannot update the ref 'HEAD': unable to append to
'.git/logs/HEAD': Bad file descriptor
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
EPROBE_DEFER, which probably wasn't available when this driver was
written, can be used instead of waiting manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240912024903.6201-9-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cleans it up automatically. No need to handle manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-6-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switching to devm management of mii_bus allows to remove
mdiobus_unregister calls and thus avoids needing a mii_bus global struct
member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-5-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's the last to go in remove. Safe to let devm handle it.
Also move request_irq to probe for clarity. It's removed in _remove not
close.
Use dev_err_probe instead of printk. Handles EPROBE_DEFER automatically.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-3-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allows to simplify the code slightly. This is safe to do as free_netdev
gets called last.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-2-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Display channel info in the RPM map debugfs output.
With this, cat /sys/kernel/debug/cn10k/rvu_pf_rpm_map
would display channel number for each device in addition to
the existing data.
Sample output:
PCI dev RVU PF Func NIX block rpm LMAC CHAN
0002:02:00.0 0x400 NIX0 rpm0 LMAC0 256
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20240912161450.164402-3-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmbhXBwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28byH+B/0ctrcmzjguuddiCiUkMS0EJaocxnE7
Et3eZtV66QlxLahTOQDAcePVIyeq1Rzc8vsruNu0QJje2Yp21WITQbl9x2dX/JEl
sPggkKpu7ERKE1vS4+HEgr3PXbjXFbF6k38jygiswG0vYzKkBT5keHJ7f9qPC+cU
BdXr+ZjYK0I5TQBOQKSH4FlKVtXSidxvYRVT4AHcQ0k3vegMc7J+/fgAaznsS85p
nwV1PsXXNQh7nM5jqdMSbibL8jvgDFiSyxtQLDogqd0ah0bYOAmyiEONv6v4UGkF
1blHqiyHUnslMYgHL/C3U0cQF8ETrDd25FOpPr1pbKbW+/KueO9Y1IyP
=kclM
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-11
The first patch is by Uwe Kleine-König targets all CAN platform driver
and switches back the remove function to struct
platform_driver::remove().
A patch by Stefan Mätje fixes the help text of the ESD USB driver.
Jake Hamby's patch masks an unneeded interrupt in the m_can driver.
The last 2 patches target the rockchip_canfd driver. Arnd Bergmann's
patch reworks the delay calculation for the timekeeping worker, a
patch by me fixes the decoding of the error code register.
* tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of error code register
can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculation
can: m_can: m_can_chip_config(): mask timestamp wraparound IRQ
can: usb: Kconfig: Fix list of devices for esd_usb driver
can: Switch back to struct platform_driver::remove()
====================
Link: https://patch.msgid.link/20240912080438.2826895-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return an error if dma_set_mask_and_coherent() fails. Don't return
success.
Fixes: a36e9f5cfe ("rtase: Add support for a pci table in this module")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/f53ed942-5ac2-424b-a1ed-9473c599905e@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmbinMQTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b1V2B/40hS58fS5dW5jVr1jhakU7AvRBxUQL
SCqWmqPv2Ul7Si5pqoWTrS1Ehn5KDnHolms4XjTNi7+9F9DMpEmOJGivZ+WP4GAK
bNg0UV32UY9rZ6UQiVyBkits60/+F1D1l/aDTs9D9FswLaihBHrX81wAByo0bYFt
+jLC3B29vfW+Cvh9lxKWGIThQi5aLPwZO1VVmBDqny4FsPZrTI6WUgjLL1nLFJ3r
8/qJeAua62wylWpTZCcBZT+zUS6CvfNfuCOqN5gwvEv/MlJqZg1XAsnwxKKA/jqx
MYO+0YO0mzqdweQkBEqwGWPWrSF+/i0iIktnAWHpc/5LEnzlPQ6q/y9+
=OwTb
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.11-20240912' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-09-12
Kuniyuki Iwashima's patch fixes an incomplete bug fix in the CAN BCM
protocol, which was introduced during v6.11.
A patch by Stefan Mätje removes the unsupported CAN_CTRLMODE_3_SAMPLES
mode for CAN-USB/3-FD devices in the esd_usb driver.
The next patch is by Martin Jocic and enables 64-bit DMA addressing
for the kvaser_pciefd driver.
The last two patches both affect the m_can driver. Jake Hamby's patch
activates NAPI before interrupts are activated, a patch by me moves
the stopping of the clock after the device has been shut down.
* tag 'linux-can-fixes-for-6.11-20240912' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: m_can: m_can_close(): stop clocks after device has been shut down
can: m_can: enable NAPI before enabling interrupts
can: kvaser_pciefd: Enable 64-bit DMA addressing
can: esd_usb: Remove CAN_CTRLMODE_3_SAMPLES for CAN-USB/3-FD
can: bcm: Clear bo->bcm_proc_read after remove_proc_entry().
====================
Link: https://patch.msgid.link/20240912075804.2825408-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the drivers which used this header have been deleted, most
of these code is obsoleted, move the only defines that are actually
used into arch/powerpc/platforms/chrp/pegasos_eth.c and delete the
file completely.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://patch.msgid.link/20240912011949.2726928-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nelson Escobar says:
====================
enic: Report per queue stats
Patch #1: Use a macro instead of static const variables for array sizes. I
didn't want to add more static const variables in the next patch
so clean up the existing ones first.
Patch #2: Collect per queue statistics
Patch #3: Report per queue stats in netdev qstats
Patch #4: Report some per queue stats in ethtool
# NETIF="eno6" tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..5
ok 1 stats.check_pause # XFAIL pause not supported by the device
ok 2 stats.check_fec # XFAIL FEC not supported by the device
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"ifindex": "34"}'
[{'ifindex': 34,
'rx-bytes': 66762680,
'rx-csum-unnecessary': 1009345,
'rx-hw-drop-overruns': 0,
'rx-hw-drops': 0,
'rx-packets': 1009673,
'tx-bytes': 137936674899,
'tx-csum-none': 125,
'tx-hw-gso-packets': 2408712,
'tx-needs-csum': 2431531,
'tx-packets': 15475466,
'tx-stop': 0,
'tx-wake': 0}]
v2: https://lore.kernel.org/20240905010900.24152-1-neescoba@cisco.com
v1: https://lore.kernel.org/20240823235401.29996-1-neescoba@cisco.com
====================
Link: https://patch.msgid.link/20240912005039.10797-1-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make 'ethtool -S <intf>' output show some per rq/wq statistics that
don't exist in the netdev qstats.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-5-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Collect and per rq/wq statistics.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-3-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
