Commit Graph

164 Commits

Author SHA1 Message Date
Linus Torvalds
4f712ee0cb S390:
* Changes to FPU handling came in via the main s390 pull request
 
 * Only deliver to the guest the SCLP events that userspace has
   requested.
 
 * More virtual vs physical address fixes (only a cleanup since
   virtual and physical address spaces are currently the same).
 
 * Fix selftests undefined behavior.
 
 x86:
 
 * Fix a restriction that the guest can't program a PMU event whose
   encoding matches an architectural event that isn't included in the
   guest CPUID.  The enumeration of an architectural event only says
   that if a CPU supports an architectural event, then the event can be
   programmed *using the architectural encoding*.  The enumeration does
   NOT say anything about the encoding when the CPU doesn't report support
   the event *in general*.  It might support it, and it might support it
   using the same encoding that made it into the architectural PMU spec.
 
 * Fix a variety of bugs in KVM's emulation of RDPMC (more details on
   individual commits) and add a selftest to verify KVM correctly emulates
   RDMPC, counter availability, and a variety of other PMC-related
   behaviors that depend on guest CPUID and therefore are easier to
   validate with selftests than with custom guests (aka kvm-unit-tests).
 
 * Zero out PMU state on AMD if the virtual PMU is disabled, it does not
   cause any bug but it wastes time in various cases where KVM would check
   if a PMC event needs to be synthesized.
 
 * Optimize triggering of emulated events, with a nice ~10% performance
   improvement in VM-Exit microbenchmarks when a vPMU is exposed to the
   guest.
 
 * Tighten the check for "PMI in guest" to reduce false positives if an NMI
   arrives in the host while KVM is handling an IRQ VM-Exit.
 
 * Fix a bug where KVM would report stale/bogus exit qualification information
   when exiting to userspace with an internal error exit code.
 
 * Add a VMX flag in /proc/cpuinfo to report 5-level EPT support.
 
 * Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for
   read, e.g. to avoid serializing vCPUs when userspace deletes a memslot.
 
 * Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB).  KVM
   doesn't support yielding in the middle of processing a zap, and 1GiB
   granularity resulted in multi-millisecond lags that are quite impolite
   for CONFIG_PREEMPT kernels.
 
 * Allocate write-tracking metadata on-demand to avoid the memory overhead when
   a kernel is built with i915 virtualization support but the workloads use
   neither shadow paging nor i915 virtualization.
 
 * Explicitly initialize a variety of on-stack variables in the emulator that
   triggered KMSAN false positives.
 
 * Fix the debugregs ABI for 32-bit KVM.
 
 * Rework the "force immediate exit" code so that vendor code ultimately decides
   how and when to force the exit, which allowed some optimization for both
   Intel and AMD.
 
 * Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
   vCPU creation ultimately failed, causing extra unnecessary work.
 
 * Cleanup the logic for checking if the currently loaded vCPU is in-kernel.
 
 * Harden against underflowing the active mmu_notifier invalidation
   count, so that "bad" invalidations (usually due to bugs elsehwere in the
   kernel) are detected earlier and are less likely to hang the kernel.
 
 x86 Xen emulation:
 
 * Overlay pages can now be cached based on host virtual address,
   instead of guest physical addresses.  This removes the need to
   reconfigure and invalidate the cache if the guest changes the
   gpa but the underlying host virtual address remains the same.
 
 * When possible, use a single host TSC value when computing the deadline for
   Xen timers in order to improve the accuracy of the timer emulation.
 
 * Inject pending upcall events when the vCPU software-enables its APIC to fix
   a bug where an upcall can be lost (and to follow Xen's behavior).
 
 * Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
   events fails, e.g. if the guest has aliased xAPIC IDs.
 
 RISC-V:
 
 * Support exception and interrupt handling in selftests
 
 * New self test for RISC-V architectural timer (Sstc extension)
 
 * New extension support (Ztso, Zacas)
 
 * Support userspace emulation of random number seed CSRs.
 
 ARM:
 
 * Infrastructure for building KVM's trap configuration based on the
   architectural features (or lack thereof) advertised in the VM's ID
   registers
 
 * Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
   x86's WC) at stage-2, improving the performance of interacting with
   assigned devices that can tolerate it
 
 * Conversion of KVM's representation of LPIs to an xarray, utilized to
   address serialization some of the serialization on the LPI injection
   path
 
 * Support for _architectural_ VHE-only systems, advertised through the
   absence of FEAT_E2H0 in the CPU's ID register
 
 * Miscellaneous cleanups, fixes, and spelling corrections to KVM and
   selftests
 
 LoongArch:
 
 * Set reserved bits as zero in CPUCFG.
 
 * Start SW timer only when vcpu is blocking.
 
 * Do not restart SW timer when it is expired.
 
 * Remove unnecessary CSR register saving during enter guest.
 
 * Misc cleanups and fixes as usual.
 
 Generic:
 
 * cleanup Kconfig by removing CONFIG_HAVE_KVM, which was basically always
   true on all architectures except MIPS (where Kconfig determines the
   available depending on CPU capabilities).  It is replaced either by
   an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM)
   everywhere else.
 
 * Factor common "select" statements in common code instead of requiring
   each architecture to specify it
 
 * Remove thoroughly obsolete APIs from the uapi headers.
 
 * Move architecture-dependent stuff to uapi/asm/kvm.h
 
 * Always flush the async page fault workqueue when a work item is being
   removed, especially during vCPU destruction, to ensure that there are no
   workers running in KVM code when all references to KVM-the-module are gone,
   i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded.
 
 * Grab a reference to the VM's mm_struct in the async #PF worker itself instead
   of gifting the worker a reference, so that there's no need to remember
   to *conditionally* clean up after the worker.
 
 Selftests:
 
 * Reduce boilerplate especially when utilize selftest TAP infrastructure.
 
 * Add basic smoke tests for SEV and SEV-ES, along with a pile of library
   support for handling private/encrypted/protected memory.
 
 * Fix benign bugs where tests neglect to close() guest_memfd files.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmX0iP8UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroND7wf+JZoNvwZ+bmwWe/4jn/YwNoYi/C5z
 eypn8M1gsWEccpCpqPBwznVm9T29rF4uOlcMvqLEkHfTpaL1EKUUjP1lXPz/ileP
 6a2RdOGxAhyTiFC9fjy+wkkjtLbn1kZf6YsS0hjphP9+w0chNbdn0w81dFVnXryd
 j7XYI8R/bFAthNsJOuZXSEjCfIHxvTTG74OrTf1B1FEBB+arPmrgUeJftMVhffQK
 Sowgg8L/Ii/x6fgV5NZQVSIyVf1rp8z7c6UaHT4Fwb0+RAMW8p9pYv9Qp1YkKp8y
 5j0V9UzOHP7FRaYimZ5BtwQoqiZXYylQ+VuU/Y2f4X85cvlLzSqxaEMAPA==
 =mqOV
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "S390:

   - Changes to FPU handling came in via the main s390 pull request

   - Only deliver to the guest the SCLP events that userspace has
     requested

   - More virtual vs physical address fixes (only a cleanup since
     virtual and physical address spaces are currently the same)

   - Fix selftests undefined behavior

  x86:

   - Fix a restriction that the guest can't program a PMU event whose
     encoding matches an architectural event that isn't included in the
     guest CPUID. The enumeration of an architectural event only says
     that if a CPU supports an architectural event, then the event can
     be programmed *using the architectural encoding*. The enumeration
     does NOT say anything about the encoding when the CPU doesn't
     report support the event *in general*. It might support it, and it
     might support it using the same encoding that made it into the
     architectural PMU spec

   - Fix a variety of bugs in KVM's emulation of RDPMC (more details on
     individual commits) and add a selftest to verify KVM correctly
     emulates RDMPC, counter availability, and a variety of other
     PMC-related behaviors that depend on guest CPUID and therefore are
     easier to validate with selftests than with custom guests (aka
     kvm-unit-tests)

   - Zero out PMU state on AMD if the virtual PMU is disabled, it does
     not cause any bug but it wastes time in various cases where KVM
     would check if a PMC event needs to be synthesized

   - Optimize triggering of emulated events, with a nice ~10%
     performance improvement in VM-Exit microbenchmarks when a vPMU is
     exposed to the guest

   - Tighten the check for "PMI in guest" to reduce false positives if
     an NMI arrives in the host while KVM is handling an IRQ VM-Exit

   - Fix a bug where KVM would report stale/bogus exit qualification
     information when exiting to userspace with an internal error exit
     code

   - Add a VMX flag in /proc/cpuinfo to report 5-level EPT support

   - Rework TDP MMU root unload, free, and alloc to run with mmu_lock
     held for read, e.g. to avoid serializing vCPUs when userspace
     deletes a memslot

   - Tear down TDP MMU page tables at 4KiB granularity (used to be
     1GiB). KVM doesn't support yielding in the middle of processing a
     zap, and 1GiB granularity resulted in multi-millisecond lags that
     are quite impolite for CONFIG_PREEMPT kernels

   - Allocate write-tracking metadata on-demand to avoid the memory
     overhead when a kernel is built with i915 virtualization support
     but the workloads use neither shadow paging nor i915 virtualization

   - Explicitly initialize a variety of on-stack variables in the
     emulator that triggered KMSAN false positives

   - Fix the debugregs ABI for 32-bit KVM

   - Rework the "force immediate exit" code so that vendor code
     ultimately decides how and when to force the exit, which allowed
     some optimization for both Intel and AMD

   - Fix a long-standing bug where kvm_has_noapic_vcpu could be left
     elevated if vCPU creation ultimately failed, causing extra
     unnecessary work

   - Cleanup the logic for checking if the currently loaded vCPU is
     in-kernel

   - Harden against underflowing the active mmu_notifier invalidation
     count, so that "bad" invalidations (usually due to bugs elsehwere
     in the kernel) are detected earlier and are less likely to hang the
     kernel

  x86 Xen emulation:

   - Overlay pages can now be cached based on host virtual address,
     instead of guest physical addresses. This removes the need to
     reconfigure and invalidate the cache if the guest changes the gpa
     but the underlying host virtual address remains the same

   - When possible, use a single host TSC value when computing the
     deadline for Xen timers in order to improve the accuracy of the
     timer emulation

   - Inject pending upcall events when the vCPU software-enables its
     APIC to fix a bug where an upcall can be lost (and to follow Xen's
     behavior)

   - Fall back to the slow path instead of warning if "fast" IRQ
     delivery of Xen events fails, e.g. if the guest has aliased xAPIC
     IDs

  RISC-V:

   - Support exception and interrupt handling in selftests

   - New self test for RISC-V architectural timer (Sstc extension)

   - New extension support (Ztso, Zacas)

   - Support userspace emulation of random number seed CSRs

  ARM:

   - Infrastructure for building KVM's trap configuration based on the
     architectural features (or lack thereof) advertised in the VM's ID
     registers

   - Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
     x86's WC) at stage-2, improving the performance of interacting with
     assigned devices that can tolerate it

   - Conversion of KVM's representation of LPIs to an xarray, utilized
     to address serialization some of the serialization on the LPI
     injection path

   - Support for _architectural_ VHE-only systems, advertised through
     the absence of FEAT_E2H0 in the CPU's ID register

   - Miscellaneous cleanups, fixes, and spelling corrections to KVM and
     selftests

  LoongArch:

   - Set reserved bits as zero in CPUCFG

   - Start SW timer only when vcpu is blocking

   - Do not restart SW timer when it is expired

   - Remove unnecessary CSR register saving during enter guest

   - Misc cleanups and fixes as usual

  Generic:

   - Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
     always true on all architectures except MIPS (where Kconfig
     determines the available depending on CPU capabilities). It is
     replaced either by an architecture-dependent symbol for MIPS, and
     IS_ENABLED(CONFIG_KVM) everywhere else

   - Factor common "select" statements in common code instead of
     requiring each architecture to specify it

   - Remove thoroughly obsolete APIs from the uapi headers

   - Move architecture-dependent stuff to uapi/asm/kvm.h

   - Always flush the async page fault workqueue when a work item is
     being removed, especially during vCPU destruction, to ensure that
     there are no workers running in KVM code when all references to
     KVM-the-module are gone, i.e. to prevent a very unlikely
     use-after-free if kvm.ko is unloaded

   - Grab a reference to the VM's mm_struct in the async #PF worker
     itself instead of gifting the worker a reference, so that there's
     no need to remember to *conditionally* clean up after the worker

  Selftests:

   - Reduce boilerplate especially when utilize selftest TAP
     infrastructure

   - Add basic smoke tests for SEV and SEV-ES, along with a pile of
     library support for handling private/encrypted/protected memory

   - Fix benign bugs where tests neglect to close() guest_memfd files"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
  selftests: kvm: remove meaningless assignments in Makefiles
  KVM: riscv: selftests: Add Zacas extension to get-reg-list test
  RISC-V: KVM: Allow Zacas extension for Guest/VM
  KVM: riscv: selftests: Add Ztso extension to get-reg-list test
  RISC-V: KVM: Allow Ztso extension for Guest/VM
  RISC-V: KVM: Forward SEED CSR access to user space
  KVM: riscv: selftests: Add sstc timer test
  KVM: riscv: selftests: Change vcpu_has_ext to a common function
  KVM: riscv: selftests: Add guest helper to get vcpu id
  KVM: riscv: selftests: Add exception handling support
  LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
  LoongArch: KVM: Do not restart SW timer when it is expired
  LoongArch: KVM: Start SW timer only when vcpu is blocking
  LoongArch: KVM: Set reserved bits as zero in CPUCFG
  KVM: selftests: Explicitly close guest_memfd files in some gmem tests
  KVM: x86/xen: fix recursive deadlock in timer injection
  KVM: pfncache: simplify locking and make more self-contained
  KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
  KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
  KVM: x86/xen: improve accuracy of Xen timers
  ...
2024-03-15 13:03:13 -07:00
Linus Torvalds
902861e34c - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory.  Series
   "implement "memmap on memory" feature on s390".
 
 - More folio conversions from Matthew Wilcox in the series
 
 	"Convert memcontrol charge moving to use folios"
 	"mm: convert mm counter to take a folio"
 
 - Chengming Zhou has optimized zswap's rbtree locking, providing
   significant reductions in system time and modest but measurable
   reductions in overall runtimes.  The series is "mm/zswap: optimize the
   scalability of zswap rb-tree".
 
 - Chengming Zhou has also provided the series "mm/zswap: optimize zswap
   lru list" which provides measurable runtime benefits in some
   swap-intensive situations.
 
 - And Chengming Zhou further optimizes zswap in the series "mm/zswap:
   optimize for dynamic zswap_pools".  Measured improvements are modest.
 
 - zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
   zswap: simplify zswap_swapoff()".
 
 - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
   contributed several DAX cleanups as well as adding a sysfs tunable to
   control the memmap_on_memory setting when the dax device is hotplugged
   as system memory.
 
 - Johannes Weiner has added the large series "mm: zswap: cleanups",
   which does that.
 
 - More DAMON work from SeongJae Park in the series
 
 	"mm/damon: make DAMON debugfs interface deprecation unignorable"
 	"selftests/damon: add more tests for core functionalities and corner cases"
 	"Docs/mm/damon: misc readability improvements"
 	"mm/damon: let DAMOS feeds and tame/auto-tune itself"
 
 - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
   extension" Rakie Kim has developed a new mempolicy interleaving policy
   wherein we allocate memory across nodes in a weighted fashion rather
   than uniformly.  This is beneficial in heterogeneous memory environments
   appearing with CXL.
 
 - Christophe Leroy has contributed some cleanup and consolidation work
   against the ARM pagetable dumping code in the series "mm: ptdump:
   Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
 
 - Luis Chamberlain has added some additional xarray selftesting in the
   series "test_xarray: advanced API multi-index tests".
 
 - Muhammad Usama Anjum has reworked the selftest code to make its
   human-readable output conform to the TAP ("Test Anything Protocol")
   format.  Amongst other things, this opens up the use of third-party
   tools to parse and process out selftesting results.
 
 - Ryan Roberts has added fork()-time PTE batching of THP ptes in the
   series "mm/memory: optimize fork() with PTE-mapped THP".  Mainly
   targeted at arm64, this significantly speeds up fork() when the process
   has a large number of pte-mapped folios.
 
 - David Hildenbrand also gets in on the THP pte batching game in his
   series "mm/memory: optimize unmap/zap with PTE-mapped THP".  It
   implements batching during munmap() and other pte teardown situations.
   The microbenchmark improvements are nice.
 
 - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
   Roberts further utilizes arm's pte's contiguous bit ("contpte
   mappings").  Kernel build times on arm64 improved nicely.  Ryan's series
   "Address some contpte nits" provides some followup work.
 
 - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
   fixed an obscure hugetlb race which was causing unnecessary page faults.
   He has also added a reproducer under the selftest code.
 
 - In the series "selftests/mm: Output cleanups for the compaction test",
   Mark Brown did what the title claims.
 
 - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
 
 - Even more zswap material from Nhat Pham.  The series "fix and extend
   zswap kselftests" does as claimed.
 
 - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
   regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
   our handling of DAX on archiecctures which have virtually aliasing data
   caches.  The arm architecture is the main beneficiary.
 
 - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
   improvements in worst-case mmap_lock hold times during certain
   userfaultfd operations.
 
 - Some page_owner enhancements and maintenance work from Oscar Salvador
   in his series
 
 	"page_owner: print stacks and their outstanding allocations"
 	"page_owner: Fixup and cleanup"
 
 - Uladzislau Rezki has contributed some vmalloc scalability improvements
   in his series "Mitigate a vmap lock contention".  It realizes a 12x
   improvement for a certain microbenchmark.
 
 - Some kexec/crash cleanup work from Baoquan He in the series "Split
   crash out from kexec and clean up related config items".
 
 - Some zsmalloc maintenance work from Chengming Zhou in the series
 
 	"mm/zsmalloc: fix and optimize objects/page migration"
 	"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
 
 - Zi Yan has taught the MM to perform compaction on folios larger than
   order=0.  This a step along the path to implementaton of the merging of
   large anonymous folios.  The series is named "Enable >0 order folio
   memory compaction".
 
 - Christoph Hellwig has done quite a lot of cleanup work in the
   pagecache writeback code in his series "convert write_cache_pages() to
   an iterator".
 
 - Some modest hugetlb cleanups and speedups in Vishal Moola's series
   "Handle hugetlb faults under the VMA lock".
 
 - Zi Yan has changed the page splitting code so we can split huge pages
   into sizes other than order-0 to better utilize large folios.  The
   series is named "Split a folio to any lower order folios".
 
 - David Hildenbrand has contributed the series "mm: remove
   total_mapcount()", a cleanup.
 
 - Matthew Wilcox has sought to improve the performance of bulk memory
   freeing in his series "Rearrange batched folio freeing".
 
 - Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
   provides large improvements in bootup times on large machines which are
   configured to use large numbers of hugetlb pages.
 
 - Matthew Wilcox's series "PageFlags cleanups" does that.
 
 - Qi Zheng's series "minor fixes and supplement for ptdesc" does that
   also.  S390 is affected.
 
 - Cleanups to our pagemap utility functions from Peter Xu in his series
   "mm/treewide: Replace pXd_large() with pXd_leaf()".
 
 - Nico Pache has fixed a few things with our hugepage selftests in his
   series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
 
 - Also, of course, many singleton patches to many things.  Please see
   the individual changelogs for details.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
 joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
 TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
 =TG55
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
   from hotplugged memory rather than only from main memory. Series
   "implement "memmap on memory" feature on s390".

 - More folio conversions from Matthew Wilcox in the series

	"Convert memcontrol charge moving to use folios"
	"mm: convert mm counter to take a folio"

 - Chengming Zhou has optimized zswap's rbtree locking, providing
   significant reductions in system time and modest but measurable
   reductions in overall runtimes. The series is "mm/zswap: optimize the
   scalability of zswap rb-tree".

 - Chengming Zhou has also provided the series "mm/zswap: optimize zswap
   lru list" which provides measurable runtime benefits in some
   swap-intensive situations.

 - And Chengming Zhou further optimizes zswap in the series "mm/zswap:
   optimize for dynamic zswap_pools". Measured improvements are modest.

 - zswap cleanups and simplifications from Yosry Ahmed in the series
   "mm: zswap: simplify zswap_swapoff()".

 - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
   contributed several DAX cleanups as well as adding a sysfs tunable to
   control the memmap_on_memory setting when the dax device is
   hotplugged as system memory.

 - Johannes Weiner has added the large series "mm: zswap: cleanups",
   which does that.

 - More DAMON work from SeongJae Park in the series

	"mm/damon: make DAMON debugfs interface deprecation unignorable"
	"selftests/damon: add more tests for core functionalities and corner cases"
	"Docs/mm/damon: misc readability improvements"
	"mm/damon: let DAMOS feeds and tame/auto-tune itself"

 - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
   extension" Rakie Kim has developed a new mempolicy interleaving
   policy wherein we allocate memory across nodes in a weighted fashion
   rather than uniformly. This is beneficial in heterogeneous memory
   environments appearing with CXL.

 - Christophe Leroy has contributed some cleanup and consolidation work
   against the ARM pagetable dumping code in the series "mm: ptdump:
   Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".

 - Luis Chamberlain has added some additional xarray selftesting in the
   series "test_xarray: advanced API multi-index tests".

 - Muhammad Usama Anjum has reworked the selftest code to make its
   human-readable output conform to the TAP ("Test Anything Protocol")
   format. Amongst other things, this opens up the use of third-party
   tools to parse and process out selftesting results.

 - Ryan Roberts has added fork()-time PTE batching of THP ptes in the
   series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
   targeted at arm64, this significantly speeds up fork() when the
   process has a large number of pte-mapped folios.

 - David Hildenbrand also gets in on the THP pte batching game in his
   series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
   implements batching during munmap() and other pte teardown
   situations. The microbenchmark improvements are nice.

 - And in the series "Transparent Contiguous PTEs for User Mappings"
   Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
   mappings"). Kernel build times on arm64 improved nicely. Ryan's
   series "Address some contpte nits" provides some followup work.

 - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
   fixed an obscure hugetlb race which was causing unnecessary page
   faults. He has also added a reproducer under the selftest code.

 - In the series "selftests/mm: Output cleanups for the compaction
   test", Mark Brown did what the title claims.

 - Kinsey Ho has added the series "mm/mglru: code cleanup and
   refactoring".

 - Even more zswap material from Nhat Pham. The series "fix and extend
   zswap kselftests" does as claimed.

 - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
   regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
   in our handling of DAX on archiecctures which have virtually aliasing
   data caches. The arm architecture is the main beneficiary.

 - Lokesh Gidra's series "per-vma locks in userfaultfd" provides
   dramatic improvements in worst-case mmap_lock hold times during
   certain userfaultfd operations.

 - Some page_owner enhancements and maintenance work from Oscar Salvador
   in his series

	"page_owner: print stacks and their outstanding allocations"
	"page_owner: Fixup and cleanup"

 - Uladzislau Rezki has contributed some vmalloc scalability
   improvements in his series "Mitigate a vmap lock contention". It
   realizes a 12x improvement for a certain microbenchmark.

 - Some kexec/crash cleanup work from Baoquan He in the series "Split
   crash out from kexec and clean up related config items".

 - Some zsmalloc maintenance work from Chengming Zhou in the series

	"mm/zsmalloc: fix and optimize objects/page migration"
	"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"

 - Zi Yan has taught the MM to perform compaction on folios larger than
   order=0. This a step along the path to implementaton of the merging
   of large anonymous folios. The series is named "Enable >0 order folio
   memory compaction".

 - Christoph Hellwig has done quite a lot of cleanup work in the
   pagecache writeback code in his series "convert write_cache_pages()
   to an iterator".

 - Some modest hugetlb cleanups and speedups in Vishal Moola's series
   "Handle hugetlb faults under the VMA lock".

 - Zi Yan has changed the page splitting code so we can split huge pages
   into sizes other than order-0 to better utilize large folios. The
   series is named "Split a folio to any lower order folios".

 - David Hildenbrand has contributed the series "mm: remove
   total_mapcount()", a cleanup.

 - Matthew Wilcox has sought to improve the performance of bulk memory
   freeing in his series "Rearrange batched folio freeing".

 - Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
   provides large improvements in bootup times on large machines which
   are configured to use large numbers of hugetlb pages.

 - Matthew Wilcox's series "PageFlags cleanups" does that.

 - Qi Zheng's series "minor fixes and supplement for ptdesc" does that
   also. S390 is affected.

 - Cleanups to our pagemap utility functions from Peter Xu in his series
   "mm/treewide: Replace pXd_large() with pXd_leaf()".

 - Nico Pache has fixed a few things with our hugepage selftests in his
   series "selftests/mm: Improve Hugepage Test Handling in MM
   Selftests".

 - Also, of course, many singleton patches to many things. Please see
   the individual changelogs for details.

* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
  mm/zswap: remove the memcpy if acomp is not sleepable
  crypto: introduce: acomp_is_async to expose if comp drivers might sleep
  memtest: use {READ,WRITE}_ONCE in memory scanning
  mm: prohibit the last subpage from reusing the entire large folio
  mm: recover pud_leaf() definitions in nopmd case
  selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
  selftests/mm: skip uffd hugetlb tests with insufficient hugepages
  selftests/mm: dont fail testsuite due to a lack of hugepages
  mm/huge_memory: skip invalid debugfs new_order input for folio split
  mm/huge_memory: check new folio order when split a folio
  mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
  mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
  mm: fix list corruption in put_pages_list
  mm: remove folio from deferred split list before uncharging it
  filemap: avoid unnecessary major faults in filemap_fault()
  mm,page_owner: drop unnecessary check
  mm,page_owner: check for null stack_record before bumping its refcount
  mm: swap: fix race between free_swap_and_cache() and swapoff()
  mm/treewide: align up pXd_leaf() retval across archs
  mm/treewide: drop pXd_large()
  ...
2024-03-14 17:43:30 -07:00
Linus Torvalds
65d287c7eb asm-generic updates for 6.9
Just two small updates this time:
 
  - A series I did to unify the definition of PAGE_SIZE through Kconfig,
    intended to help with a vdso rework that needs the constant but
    cannot include the normal kernel headers when building the compat
    VDSO on arm64 and potentially others.
 
  - a patch from Yan Zhao to remove the pfn_to_virt() definitions from
    a couple of architectures after finding they were both incorrect
    and entirely unused.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXwEjQACgkQYKtH/8kJ
 UifwHxAAqXl6R4cZtjUKxHpQoX7TTtBgWyZ9OID8KYt8V/QN+Jme6EhuGV/5CJ1k
 5n30PuDvSKPB9865HfCZgh0BDSzSFo2xtc/bDuqiPHO5deNhXUDKX5MowIs3Pf2J
 EM1OJYiXG/g9vR19uaHvWVA4I1eJk01+Pl5nZ3DA+n9ZYcnM35+HO7EQcH80FGwz
 jkjN1HizxDmuMDDKn24hrSt6mVoE54JWyeDvklbY4CbwZbtFbtBJiFv3NWTfaxSf
 MPR1fopgaAkT0aJzUXOh36qDodyqR2tz4M7ucpRKa6/YlOewDN59tFwgwtun0s74
 lLJPBqQ6cT8no1VODNnKPb1M5Jh3uzsF1fuhnU6B06Z+1s7sxxqOli1Q0yrpivYY
 SCAh6WmiCMhHeP/sxfQHRhhrx9l0gOarXh7s4wRJFp+LAi59NuUTeJotoOfboX4M
 ozeFgW1Rlr+wORzUargRnQiXMLObC/RFdogLgiBJwa8XOI8bOPZg9JfAUPOwbfa2
 37IFZRleu+V2NaBF8rS5wRGI8hVp99XSMjlskKLM/645doqNq1cyR9UO68jb1hhF
 d5X2+BEaEJTHJbXEQ9YtThpNWYzHXL5dFswVJfHDs+CW1FWi5GVqCufZGzr7xihy
 uNLlVqXLhjM+hU2dDoS4ZshygxN3b8f2qa+GtlIMBYrLcbcjxd4=
 =X4Cs
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "Just two small updates this time:

   - A series I did to unify the definition of PAGE_SIZE through
     Kconfig, intended to help with a vdso rework that needs the
     constant but cannot include the normal kernel headers when building
     the compat VDSO on arm64 and potentially others

   - a patch from Yan Zhao to remove the pfn_to_virt() definitions from
     a couple of architectures after finding they were both incorrect
     and entirely unused"

* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: define CONFIG_PAGE_SIZE_*KB on all architectures
  arch: simplify architecture specific page size configuration
  arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
  mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
2024-03-12 10:56:28 -07:00
Andrew Ballance
ded79af42f scripts/gdb/symbols: fix invalid escape sequence warning
With python 3.12, '\.' results in this warning
    SyntaxWarning: invalid escape sequence '\.'

Link: https://lkml.kernel.org/r/20240304012507.240380-1-andrewjballance@gmail.com
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Koudai Iwahori <koudai@google.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-07 16:14:19 -08:00
Arnd Bergmann
d3e5bab923 arch: simplify architecture specific page size configuration
arc, arm64, parisc and powerpc all have their own Kconfig symbols
in place of the common CONFIG_PAGE_SIZE_4KB symbols. Change these
so the common symbols are the ones that are actually used, while
leaving the arhcitecture specific ones as the user visible
place for configuring it, to avoid breaking user configs.

Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> (powerpc32)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-06 19:29:03 +01:00
Kuan-Ying Lee
0040f2c553 scripts/gdb/vmalloc: fix vmallocinfo error
The patch series "Mitigate a vmap lock contention" removes vmap_area_list,
which will break the gdb vmallocinfo command:

(gdb) lx-vmallocinfo
Python Exception <class 'gdb.error'>: No symbol "vmap_area_list" in current context.
Error occurred in Python: No symbol "vmap_area_list" in current context.

So we can instead use vmap_nodes to iterate all vmallocinfo.

Link: https://lkml.kernel.org/r/20240207085856.11190-1-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Casper Li <casper.li@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-21 16:00:02 -08:00
Paolo Bonzini
dcf0926e9b x86: replace CONFIG_HAVE_KVM with IS_ENABLED(CONFIG_KVM)
It is more accurate to check if KVM is enabled, instead of having the
architecture say so.  Architectures always "have" KVM, so for example
checking CONFIG_HAVE_KVM in x86 code is pointless, but if KVM is disabled
in a specific build, there is no need for support code.

Alternatively, many of the #ifdefs could simply be deleted.  However,
this would add completely dead code.  For example, when KVM is disabled,
there should not be any posted interrupts, i.e. NOT wiring up the "dummy"
handlers and treating IRQs on those vectors as spurious is the right
thing to do.

Cc: x86@kernel.org
Cc: kbingham@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-02-08 08:45:35 -05:00
Linus Torvalds
b5f66ba2d0 Kbuild updates for v6.8
- Make Kconfig parse the input .config more precisely
 
  - Support W=c and W=e options for Kconfig
 
  - Set Kconfig int/hex symbols to zero if the 'default' property is
    missing
 
  - Add .editorconfig
 
  - Add scripts/git.orderFile
 
  - Add a script to detect backward-incompatible changes in UAPI headers
 
  - Resolve the symlink passed to O= option properly
 
  - Use the user-supplied mtime for all files in the builtin initramfs,
    which provides better reproducible builds
 
  - Fix the direct execution of debian/rules for Debian package builds
 
  - Use build ID instead of the .gnu_debuglink section for the Debian dbg
    package
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmWnEQ8VHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGbn8P/RpJ6f4eYAVG/Jnsf5xkkuoOCdWP
 ADA9I5VfgiUzEZV48tjjUOOhk9LO/QDwlxtbLZjlo9jC5TI+IVrXzCu4ShRhmE+4
 eM/VXFur9RN6CuNWNmkf7yzd0dawiwL4QR/0L82ZNmwXGymeEUzzmFviD5KfJRY8
 z6bgA4jLu9qsHNzX8eYA2LU+jpOoNiRQAlGzTE0oDgQnv/ZXJB/H+8tEhzH85oZk
 F087IQCct25yGAbZhEkuX2PHx5kus9ICF72Pkqxh075aOQzfKIO8S3PPkt4nAiHK
 Cb6sahRcO7QwxH7MJVWgmfbXNMbs9p8fOj9Aiudl2EEWVRav1mw9UuA5kCnTh6vi
 LpI4bYNChl8fNTX2gX+Dfkmbc5r2Yl65ufW23VlRdZfdrXbJWlQbkkdvJeb7NoEj
 u6z26b/2WMaTecxr0Bw50PbleHYZwWIscN5lGoK6rgUU04mr4t8g1ejpcxfj+79S
 MfbpEvPGKMJjelRBHf2x4qzzHQZHeqIbaItCNt8wGSVipgTvrWED2UaaEnW02SoL
 pwIcBjV9xiUo8UUVil/R8W6xr/Ybv0lWYcIBzQjibiCzhFgw4adPnzZ6eTlaV+6e
 ne527SqxQ0gF3xgDhxOz4VUF/b4TlnVycArIl80Kk/sFd8jX+AObkCtamZEPc0Rz
 GjsorSF/s+Fw7XMp
 =HXZB
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Make Kconfig parse the input .config more precisely

 - Support W=c and W=e options for Kconfig

 - Set Kconfig int/hex symbols to zero if the 'default' property is
   missing

 - Add .editorconfig

 - Add scripts/git.orderFile

 - Add a script to detect backward-incompatible changes in UAPI headers

 - Resolve the symlink passed to O= option properly

 - Use the user-supplied mtime for all files in the builtin initramfs,
   which provides better reproducible builds

 - Fix the direct execution of debian/rules for Debian package builds

 - Use build ID instead of the .gnu_debuglink section for the Debian dbg
   package

* tag 'kbuild-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (53 commits)
  kbuild: deb-pkg: use debian/<package> for tmpdir
  kbuild: deb-pkg: move 'make headers' to build-arch
  kbuild: deb-pkg: do not search for 'scripts' directory under arch/
  kbuild: deb-pkg: use build ID instead of debug link for dbg package
  kbuild: deb-pkg: use more debhelper commands in builddeb
  kbuild: deb-pkg: remove unneeded '-f $srctree/Makefile' in debian/rules
  kbuild: deb-pkg: allow to run debian/rules from output directory
  kbuild: deb-pkg: set DEB_* variables if debian/rules is directly executed
  kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rules
  kbuild: deb-pkg: factor out common Make options in debian/rules
  kbuild: deb-pkg: hard-code Build-Depends
  kbuild: deb-pkg: split debian/copyright from the mkdebian script
  gen_init_cpio: Apply mtime supplied by user to all file types
  kbuild: resolve symlinks for O= properly
  docs: dev-tools: Add UAPI checker documentation
  check-uapi: Introduce check-uapi.sh
  scripts: Introduce a default git.orderFile
  kconfig: WERROR unmet symbol dependency
  Add .editorconfig file for basic formatting
  kconfig: Use KCONFIG_CONFIG instead of .config
  ...
2024-01-18 17:57:07 -08:00
Kuan-Ying Lee
e52ec6a2db scripts/gdb: remove exception handling and refine print format
1. When we crash on a page, we want to check what happened on this
   page instead of skipping this page by try-except block.  Thus, removing
   the try-except block.

2. Remove redundant comma and print the task name properly.

Link: https://lkml.kernel.org/r/20231127070404.4192-4-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-10 17:21:49 -08:00
Kuan-Ying Lee
125e9987a2 scripts/gdb/stackdepot: rename pool_index to pools_num
After stackdepot evicting support patchset[1], we rename pool_index to
pools_num.

To avoid from the below issue, we rename consistently in
gdb scripts.

Python Exception <class 'gdb.error'>: No symbol "pool_index" in current
context.
Error occurred in Python: No symbol "pool_index" in current context.

[1] https://lore.kernel.org/linux-mm/cover.1700502145.git.andreyknvl@google.com/
Link: https://lkml.kernel.org/r/20231129065142.13375-3-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-10 17:21:48 -08:00
Florian Fainelli
801a2b1b49 scripts/gdb: fix lx-device-list-bus and lx-device-list-class
After the conversion to bus_to_subsys() and class_to_subsys(), the gdb
scripts listing the system buses and classes respectively was broken, fix
those by returning the subsys_priv pointer and have the various caller
de-reference either the 'bus' or 'class' structure members accordingly.

Link: https://lkml.kernel.org/r/20231130043317.174188-1-florian.fainelli@broadcom.com
Fixes: 7b884b7f24 ("driver core: class.c: convert to only use class_to_subsys")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-06 16:12:49 -08:00
Kuan-Ying Lee
854f2764b5 scripts/gdb/tasks: fix lx-ps command error
Since commit 8e1f385104 ("kill task_struct->thread_group") remove
the thread_group, we will encounter below issue.

(gdb) lx-ps
      TASK          PID    COMM
0xffff800086503340   0   swapper/0
Python Exception <class 'gdb.error'>: There is no member named thread_group.
Error occurred in Python: There is no member named thread_group.

We use signal->thread_head to iterate all threads instead.

[Kuan-Ying.Lee@mediatek.com: v2]
  Link: https://lkml.kernel.org/r/20231129065142.13375-2-Kuan-Ying.Lee@mediatek.com
Link: https://lkml.kernel.org/r/20231127070404.4192-2-Kuan-Ying.Lee@mediatek.com
Fixes: 8e1f385104 ("kill task_struct->thread_group")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-06 16:12:47 -08:00
Masahiro Yamada
0df8e97085 scripts: clean up IA-64 code
A little more janitorial work after commit cf8e865810 ("arch: Remove
Itanium (IA-64) architecture").

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-12-03 18:51:48 +09:00
Ben Wolsieffer
6620999f0d scripts/gdb/vmalloc: disable on no-MMU
vmap_area does not exist on no-MMU, therefore the GDB scripts fail to
load:

Traceback (most recent call last):
  File "<...>/vmlinux-gdb.py", line 51, in <module>
    import linux.vmalloc
  File "<...>/scripts/gdb/linux/vmalloc.py", line 14, in <module>
    vmap_area_ptr_type = vmap_area_type.get_type().pointer()
                         ^^^^^^^^^^^^^^^^^^^^^^^^^
  File "<...>/scripts/gdb/linux/utils.py", line 28, in get_type
    self._type = gdb.lookup_type(self._name)
                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
gdb.error: No struct type named vmap_area.

To fix this, disable the command and add an informative error message if
CONFIG_MMU is not defined, following the example of lx-slabinfo.

Link: https://lkml.kernel.org/r/20231031202235.2655333-2-ben.wolsieffer@hefring.com
Fixes: 852622bf36 ("scripts/gdb/vmalloc: add vmallocinfo support")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-11-01 12:46:59 -07:00
Clément Léger
16501630bd scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
MOD_TEXT is only defined if CONFIG_MODULES=y which lead to loading failure
of the gdb scripts when kernel is built without CONFIG_MODULES=y:

Reading symbols from vmlinux...
Traceback (most recent call last):
  File "/foo/vmlinux-gdb.py", line 25, in <module>
    import linux.constants
  File "/foo/scripts/gdb/linux/constants.py", line 14, in <module>
    LX_MOD_TEXT = gdb.parse_and_eval("MOD_TEXT")
                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
gdb.error: No symbol "MOD_TEXT" in current context.

Add a conditional check on CONFIG_MODULES to fix this error.

Link: https://lkml.kernel.org/r/20231031134848.119391-1-da.gomez@samsung.com
Fixes: b4aff7513d ("scripts/gdb: use mem instead of core_layout to get the module address")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-11-01 12:46:59 -07:00
Deepak Gupta
cd24f44050 scripts/gdb: add lx_current support for riscv
csr_sscratch CSR holds current task_struct address when hart is in user
space.  Trap handler on entry spills csr_sscratch into "tp" (x2) register
and zeroes out csr_sscratch CSR.  Trap handler on exit reloads "tp" with
expected user mode value and place current task_struct address again in
csr_sscratch CSR.

This patch assumes "tp" is pointing to task_struct. If value in
csr_sscratch is numerically greater than "tp" then it assumes csr_sscratch
is correct address of current task_struct. This logic holds when
   - hart is in user space, "tp" will be less than csr_sscratch.
   - hart is in kernel space but not in trap handler, "tp" will be more
     than csr_sscratch (csr_sscratch being equal to 0).
   - hart is executing trap handler
       - "tp" is still pointing to user mode but csr_sscratch contains
          ptr to task_struct. Thus numerically higher.
       - "tp" is  pointing to task_struct but csr_sscratch now contains
          either 0 or numerically smaller value (transiently holds
          user mode tp)

Link: https://lkml.kernel.org/r/20231026233837.612405-1-debug@rivosinc.com
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Hsieh-Tseng Shen <woodrow.shen@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Glenn Washburn <development@efficientek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jeff Xie <xiehuan09@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-11-01 12:46:59 -07:00
Andrew Morton
493d4eecf4 revert "scripts/gdb/symbols: add specific ko module load command"
Revert 11f956538c ("scripts/gdb/symbols: add specific ko module load
command") due to breakage identified by Johannes Berg in [1].

Fixes: 11f956538c ("scripts/gdb/symbols: add specific ko module load command")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Closes: https://lkml.kernel.org/r/c44b748307a074d0c250002cdcfe209b8cce93c9.camel@sipsolutions.net [1]
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-19 13:21:33 -07:00
Kuan-Ying Lee
852622bf36 scripts/gdb/vmalloc: add vmallocinfo support
This GDB script shows the vmallocinfo for user to
analyze the vmalloc memory usage.

Example output:
0xffff800008000000-0xffff800008009000      36864 <start_kernel+372> pages=8 vmalloc
0xffff800008009000-0xffff80000800b000       8192 <gicv2m_init_one+400> phys=0x8020000 ioremap
0xffff80000800b000-0xffff80000800d000       8192 <bpf_prog_alloc_no_stats+72> pages=1 vmalloc
0xffff80000800d000-0xffff80000800f000       8192 <bpf_jit_alloc_exec+16> pages=1 vmalloc
0xffff800008010000-0xffff80000ad30000   47316992 <paging_init+452> phys=0x40210000 vmap
0xffff80000ad30000-0xffff80000c1c0000   21561344 <paging_init+556> phys=0x42f30000 vmap
0xffff80000c1c0000-0xffff80000c370000    1769472 <paging_init+592> phys=0x443c0000 vmap
0xffff80000c370000-0xffff80000de90000   28442624 <paging_init+692> phys=0x44570000 vmap
0xffff80000de90000-0xffff80000f4c1000   23269376 <paging_init+788> phys=0x46090000 vmap
0xffff80000f4c1000-0xffff80000f4c3000       8192 <gen_pool_add_owner+112> pages=1 vmalloc
0xffff80000f4c3000-0xffff80000f4c5000       8192 <gen_pool_add_owner+112> pages=1 vmalloc
0xffff80000f4c5000-0xffff80000f4c7000       8192 <gen_pool_add_owner+112> pages=1 vmalloc

Link: https://lkml.kernel.org/r/20230808083020.22254-9-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:23 -07:00
Kuan-Ying Lee
79939c4a79 scripts/gdb/slab: add slab support
Add 'lx-slabinfo' and 'lx-slabtrace' support.

This GDB scripts print slabinfo and slabtrace for user
to analyze slab memory usage.

Example output like below:
(gdb) lx-slabinfo
     Pointer       |         name         | active_objs  |   num_objs   | objsize  | objperslab  | pagesperslab
------------------ | -------------------- | ------------ | ------------ | -------- | ----------- | -------------
0xffff0000c59df480 | p9_req_t             | 0            | 0            | 280      | 29          | 2
0xffff0000c59df280 | isp1760_qh           | 0            | 0            | 160      | 25          | 1
0xffff0000c59df080 | isp1760_qtd          | 0            | 0            | 184      | 22          | 1
0xffff0000c59dee80 | isp1760_urb_listite  | 0            | 0            | 136      | 30          | 1
0xffff0000c59dec80 | asd_sas_event        | 0            | 0            | 256      | 32          | 2
0xffff0000c59dea80 | sas_task             | 0            | 0            | 448      | 36          | 4
0xffff0000c59de880 | bio-120              | 18           | 21           | 384      | 21          | 2
0xffff0000c59de680 | io_kiocb             | 0            | 0            | 448      | 36          | 4
0xffff0000c59de480 | bfq_io_cq            | 0            | 0            | 1504     | 21          | 8
0xffff0000c59de280 | bfq_queue            | 0            | 0            | 720      | 22          | 4
0xffff0000c59de080 | mqueue_inode_cache   | 1            | 28           | 1152     | 28          | 8
0xffff0000c59dde80 | v9fs_inode_cache     | 0            | 0            | 832      | 39          | 8
...

(gdb) lx-slabtrace --cache_name kmalloc-1k
63 <tty_register_device_attr+508> waste=16632/264 age=46856/46871/46888 pid=1 cpus=6,
   0xffff800008720240 <__kmem_cache_alloc_node+236>:    mov     x22, x0
   0xffff80000862a4fc <kmalloc_trace+64>:       mov     x21, x0
   0xffff8000095d086c <tty_register_device_attr+508>:   mov     x19, x0
   0xffff8000095d0f98 <tty_register_driver+704>:        cmn     x0, #0x1, lsl #12
   0xffff80000c2677e8 <vty_init+620>:   Cannot access memory at address 0xffff80000c2677e8
   0xffff80000c265a10 <tty_init+276>:   Cannot access memory at address 0xffff80000c265a10
   0xffff80000c26d3c4 <chr_dev_init+204>:       Cannot access memory at address 0xffff80000c26d3c4
   0xffff8000080161d4 <do_one_initcall+176>:    mov     w21, w0
   0xffff80000c1c1b58 <kernel_init_freeable+956>:       Cannot access memory at address 0xffff80000c1c1b58
   0xffff80000acf1334 <kernel_init+36>: bl      0xffff8000081ac040 <async_synchronize_full>
   0xffff800008018d00 <ret_from_fork+16>:       mrs     x28, sp_el0

(gdb) lx-slabtrace --cache_name kmalloc-1k --free
428 <not-available> age=4294958600 pid=0 cpus=0,

Link: https://lkml.kernel.org/r/20230808083020.22254-8-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:23 -07:00
Kuan-Ying Lee
2f060190ef scripts/gdb/page_owner: add page owner support
This GDB script prints page owner information for user to analyze the
memory usage or memory corruption issue.

Example output from an aarch64 system:

(gdb) lx-dump-page-owner --pfn 655360
page_owner tracks the page as allocated
Page last allocated via order 0, gfp_mask: 0x8, pid: 1, tgid: 1 ("swapper/0\000\000\000\000\000\000"), ts 1295948880 ns, free_ts 1011852016 ns
PFN: 655360, Flags: 0x3fffc0000000000
   0xffff8000086ab964 <post_alloc_hook+452>:    ldp     x19, x20, [sp, #16]
   0xffff80000862e4e0 <split_map_pages+344>:    cbnz    w22, 0xffff80000862e57c <split_map_pages+500>
   0xffff8000086370c4 <isolate_freepages_range+556>:    mov     x0, x27
   0xffff8000086bc1cc <alloc_contig_range+808>: mov     x24, x0
   0xffff80000877d6d8 <cma_alloc+772>:  mov     w1, w0
   0xffff8000082c8d18 <dma_alloc_from_contiguous+104>:  ldr     x19, [sp, #16]
   0xffff8000082ce0e8 <atomic_pool_expand+208>: mov     x19, x0
   0xffff80000c1e41b4 <__dma_atomic_pool_init+172>:     Cannot access memory at address 0xffff80000c1e41b4
   0xffff80000c1e4298 <dma_atomic_pool_init+92>:        Cannot access memory at address 0xffff80000c1e4298
   0xffff8000080161d4 <do_one_initcall+176>:    mov     w21, w0
   0xffff80000c1c1b50 <kernel_init_freeable+952>:       Cannot access memory at address 0xffff80000c1c1b50
   0xffff80000acf87dc <kernel_init+36>: bl      0xffff8000081ab100 <async_synchronize_full>
   0xffff800008018d00 <ret_from_fork+16>:       mrs     x28, sp_el0
page last free stack trace:
   0xffff8000086a6e8c <free_unref_page_prepare+796>:    mov     w2, w23
   0xffff8000086aee1c <free_unref_page+96>:     tst     w0, #0xff
   0xffff8000086af3f8 <__free_pages+292>:       ldp     x19, x20, [sp, #16]
   0xffff80000c1f3214 <init_cma_reserved_pageblock+220>:        Cannot access memory at address 0xffff80000c1f3214
   0xffff80000c20363c <cma_init_reserved_areas+1284>:   Cannot access memory at address 0xffff80000c20363c
   0xffff8000080161d4 <do_one_initcall+176>:    mov     w21, w0
   0xffff80000c1c1b50 <kernel_init_freeable+952>:       Cannot access memory at address 0xffff80000c1c1b50
   0xffff80000acf87dc <kernel_init+36>: bl      0xffff8000081ab100 <async_synchronize_full>
   0xffff800008018d00 <ret_from_fork+16>:       mrs     x28, sp_el0

Link: https://lkml.kernel.org/r/20230808083020.22254-7-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:23 -07:00
Kuan-Ying Lee
0e1b240a4b scripts/gdb/stackdepot: add stackdepot support
Add support for printing the backtrace of stackdepot handle.

This is the preparation patch for dumping page_owner,
slabtrace usage.

Link: https://lkml.kernel.org/r/20230808083020.22254-6-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:22 -07:00
Kuan-Ying Lee
eb985b5dbf scripts/gdb/aarch64: add aarch64 page operation helper commands and configs
1. Move page table debugging from mm.py to pgtable.py.

2. Add aarch64 kernel config and memory constants value.

3. Add below aarch64 page operation helper commands.
   page_to_pfn, page_to_phys, pfn_to_page, page_address,
   virt_to_phys, sym_to_pfn, pfn_to_kaddr, virt_to_page.

4. Only support CONFIG_SPARSEMEM_VMEMMAP=y now.

Link: https://lkml.kernel.org/r/20230808083020.22254-5-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:22 -07:00
Kuan-Ying Lee
4d040cbca8 scripts/gdb/utils: add common type usage
Since we often use 'unsigned long', 'size_t', 'usigned int'
and 'struct page', we add these common types to utils.

Link: https://lkml.kernel.org/r/20230808083020.22254-4-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:22 -07:00
Kuan-Ying Lee
82141540c3 scripts/gdb/modules: add get module text support
When we get an text address from coredump and we cannot find
this address in vmlinux, it might located in kernel module.

We want to know which kernel module it located in.

This GDB scripts can help us to find the target kernel module.

(gdb) lx-getmod-by-textaddr 0xffff800002d305ac
0xffff800002d305ac is in kasan_test.ko

Link: https://lkml.kernel.org/r/20230808083020.22254-3-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:22 -07:00
Kuan-Ying Lee
11f956538c scripts/gdb/symbols: add specific ko module load command
Patch series "Add GDB memory helper commands", v2.

I've created some GDB commands I think useful when I debug some memory
issues and kernel module issue.

For memory issue, we would like to get slabinfo, slabtrace, page_owner and
vmallocinfo to debug the memory issues.

For module issue, we would like to query kernel module name when we get a
module text address and load module symbol by specific path.

Patch 1-2:
 - Add kernel module related command.
Patch 3-5:
 - Prepares for the memory-related command.
Patch 6-8:
 - Add memory-related commands.


This patch (of 8):

Add lx-symbols <ko_path> command to support add specific
ko module.

Example output like below:
(gdb) lx-symbols mm/kasan/kasan_test.ko
loading @0xffff800002d30000: mm/kasan/kasan_test.ko

Link: https://lkml.kernel.org/r/20230808083020.22254-1-Kuan-Ying.Lee@mediatek.com
Link: https://lkml.kernel.org/r/20230808083020.22254-2-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:21 -07:00
Kuan-Ying Lee
fb40b05373 scripts/gdb: fix 'lx-lsmod' show the wrong size
'lsmod' shows total core layout size, so we need to sum up all the
sections in core layout in gdb scripts.

/ # lsmod
kasan_test 200704 0 - Live 0xffff80007f640000

Before patch:
(gdb) lx-lsmod
Address            Module                  Size  Used by
0xffff80007f640000 kasan_test             36864  0

After patch:
(gdb) lx-lsmod
Address            Module                  Size  Used by
0xffff80007f640000 kasan_test            200704  0

Link: https://lkml.kernel.org/r/20230710092852.31049-1-Kuan-Ying.Lee@mediatek.com
Fixes: b4aff7513d ("scripts/gdb: use mem instead of core_layout to get the module address")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:18:58 -07:00
Koudai Iwahori
1677bf7681 scripts/gdb: fix lx-symbols command for arm64 LLVM
lx-symbols assumes that module's .text sections is located at
`module->mem[MOD_TEXT].base` and passes it to add-symbol-file command. 
However, .text section follows after .plt section in modules built by LLVM
toolchain for arm64 target.  Symbol addresses are skewed in GDB.

Fix this issue by using the address of .text section stored in
`module->sect_attrs`.

Link: https://lkml.kernel.org/r/20230801121052.2475183-1-koudai@google.com
Signed-off-by: Koudai Iwahori <koudai@google.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:18:58 -07:00
Florian Fainelli
6a59cb5158 scripts/gdb: fix SB_* constants parsing
--0000000000009a0c9905fd9173ad
Content-Transfer-Encoding: 8bit

After f15afbd34d ("fs: fix undefined behavior in bit shift for
SB_NOUSER") the constants were changed from plain integers which
LX_VALUE() can parse to constants using the BIT() macro which causes the
following:

Reading symbols from build/linux-custom/vmlinux...done.
Traceback (most recent call last):
  File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
    import linux.constants
  File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/constants.py", line 5
    LX_SB_RDONLY = ((((1UL))) << (0))

Use LX_GDBPARSED() which does not suffer from that issue.

f15afbd34d ("fs: fix undefined behavior in bit shift for SB_NOUSER")
Link: https://lkml.kernel.org/r/20230607221337.2781730-1-florian.fainelli@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Cc: Hao Ge <gehao@kylinos.cn>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19 13:19:32 -07:00
Linus Torvalds
33afd4b763 Mainly singleton patches all over the place. Series of note are:
- updates to scripts/gdb from Glenn Washburn
 
 - kexec cleanups from Bjorn Helgaas
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr+6wAKCRDdBJ7gKXxA
 jn4NAP4u/hj/kR2dxYehcVLuQqJspCRZZBZlAReFJyHNQO6voAEAk0NN9rtG2+/E
 r0G29CJhK+YL0W6mOs8O1yo9J1rZnAM=
 =2CUV
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "Mainly singleton patches all over the place.

  Series of note are:

   - updates to scripts/gdb from Glenn Washburn

   - kexec cleanups from Bjorn Helgaas"

* tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits)
  mailmap: add entries for Paul Mackerras
  libgcc: add forward declarations for generic library routines
  mailmap: add entry for Oleksandr
  ocfs2: reduce ioctl stack usage
  fs/proc: add Kthread flag to /proc/$pid/status
  ia64: fix an addr to taddr in huge_pte_offset()
  checkpatch: introduce proper bindings license check
  epoll: rename global epmutex
  scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
  scripts/gdb: create linux/vfs.py for VFS related GDB helpers
  uapi/linux/const.h: prefer ISO-friendly __typeof__
  delayacct: track delays from IRQ/SOFTIRQ
  scripts/gdb: timerlist: convert int chunks to str
  scripts/gdb: print interrupts
  scripts/gdb: raise error with reduced debugging information
  scripts/gdb: add a Radix Tree Parser
  lib/rbtree: use '+' instead of '|' for setting color.
  proc/stat: remove arch_idle_time()
  checkpatch: check for misuse of the link tags
  checkpatch: allow Closes tags with links
  ...
2023-04-27 19:57:00 -07:00
Glenn Washburn
5a10562bde scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
$lx_dentry_name() generates a full VFS path from a given dentry pointer,
and $lx_i_dentry() returns the dentry pointer associated with the given
inode pointer, if there is one.

Link: https://lkml.kernel.org/r/c9a5ad8efbfbd2cc6559e082734eed7628f43a16.1677631565.git.development@efficientek.com
Signed-off-by: Glenn Washburn <development@efficientek.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:39:35 -07:00
Glenn Washburn
f4efbdaf59 scripts/gdb: create linux/vfs.py for VFS related GDB helpers
Patch series "GDB VFS utils".

I've created a couple GDB convenience functions that I found useful when
debugging some VFS issues and figure others might find them useful.  For
instance, they are useful in setting conditional breakpoints on VFS
functions where you only care if the dentry path is a certain value.  I
took the opportunity to create a new "vfs" python module to give VFS
related utilities a home.


This patch (of 2):

This will allow for more VFS specific GDB helpers to be collected in one
place.  Move utils.dentry_name into the vfs modules.  Also a local
variable in proc.py was changed from vfs to mnt to prevent a naming
collision with the new vfs module.

[akpm@linux-foundation.org: add SPDX-License-Identifier]
Link: https://lkml.kernel.org/r/cover.1677631565.git.development@efficientek.com
Link: https://lkml.kernel.org/r/7bba4c065a8c2c47f1fc5b03a7278005b04db251.1677631565.git.development@efficientek.com
Signed-off-by: Glenn Washburn <development@efficientek.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:39:34 -07:00
Amjad Ouled-Ameur
29692fc92c scripts/gdb: timerlist: convert int chunks to str
join() expects strings but integers are given.

Convert chunks list to strings before passing it to join()

Link: https://lkml.kernel.org/r/20230406221217.1585486-4-f.fainelli@gmail.com
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Signed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:39:34 -07:00
Florian Fainelli
b0969d7687 scripts/gdb: print interrupts
This GDB script prints the interrupts in the system in the same way that
/proc/interrupts does.  This does include the architecture specific part
done by arch_show_interrupts() for x86, ARM, ARM64 and MIPS.  Example
output from an ARM64 system:

(gdb) lx-interruptlist
           CPU0       CPU1       CPU2       CPU3
 10:       3167      1225      1276      2629     GICv2   30 Level     arch_timer
 13:          0         0         0         0     GICv2   36 Level     arm-pmu
 14:          0         0         0         0     GICv2   37 Level     arm-pmu
 15:          0         0         0         0     GICv2   38 Level     arm-pmu
 16:          0         0         0         0     GICv2   39 Level     arm-pmu
 28:          0         0         0         0  interrupt-controller@8410640    5 Edge      brcmstb-gpio-wake
 30:        125         0         0         0     GICv2  128 Level     ttyS0
 31:          0         0         0         0  interrupt-controller@8416000    0 Level     mspi_done
 32:          0         0         0         0  interrupt-controller@8410640    3 Edge      brcmstb-waketimer
 33:          0         0         0         0  interrupt-controller@8418580    8 Edge      brcmstb-waketimer-rtc
 34:        872         0         0         0     GICv2  230 Level     brcm_scmi@0
 35:          0         0         0         0  interrupt-controller@8410640   10 Edge      8d0f200.usb-phy
 37:          0         0         0         0     GICv2   97 Level     PCIe PME
 42:          0         0         0         0     GICv2  145 Level     xhci-hcd:usb1
 43:         94         0         0         0     GICv2   71 Level     mmc1
 44:          0         0         0         0     GICv2   70 Level     mmc0
IPI0:        23       666       154        98      Rescheduling interrupts
IPI1:       247      1053      1701       634      Function call interrupts
IPI2:         0         0         0         0      CPU stop interrupts
IPI3:         0         0         0         0      CPU stop (for crash dump) interrupts
IPI4:         0         0         0         0      Timer broadcast interrupts
IPI5:         7         9         5         0      IRQ work interrupts
IPI6:         0         0         0         0      CPU wake-up interrupts
ERR:          0

Link: https://lkml.kernel.org/r/20230406220451.1583239-1-f.fainelli@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:39:33 -07:00
Florian Fainelli
8af055ae25 scripts/gdb: raise error with reduced debugging information
If CONFIG_DEBUG_INFO_REDUCED is enabled in the kernel configuration, we
will typically not be able to load vmlinux-gdb.py and will fail with:

Traceback (most recent call last):
  File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
    import linux.utils
  File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/utils.py", line 131, in <module>
    atomic_long_counter_offset = atomic_long_type.get_type()['counter'].bitpos
KeyError: 'counter'

Rather be left wondering what is happening only to find out that reduced
debug information is the cause, raise an eror.  This was not typically a
problem until e3c8d33e0d ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
but it has since then.

Link: https://lkml.kernel.org/r/20230406215252.1580538-1-f.fainelli@gmail.com
Fixes: e3c8d33e0d ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:39:33 -07:00
Kieran Bingham
b7235d6bb5 scripts/gdb: add a Radix Tree Parser
Linux makes use of the Radix Tree data structure to store pointers indexed
by integer values.  This structure is utilised across many structures in
the kernel including the IRQ descriptor tables, and several filesystems.

This module provides a method to lookup values from a structure given its
head node.

Usage:

The function lx_radix_tree_lookup, must be given a symbol of type struct
radix_tree_root, and an index into that tree.

The object returned is a generic integer value, and must be cast correctly
to the type based on the storage in the data structure.

For example, to print the irq descriptor in the sparse irq_desc_tree at
index 18, try the following:

(gdb) print (struct irq_desc)$lx_radix_tree_lookup(irq_desc_tree, 18)

This script previously existed under commit
e127a73d41 ("scripts/gdb: add a Radix Tree
Parser") and was later reverted with
b447e02548a3304c47b78b5e2d75a4312a8f17e1i (Revert "scripts/gdb: add a
Radix Tree Parser").

This version expects the XArray based radix tree implementation and has
been verified using QEMU/x86 on Linux 6.3-rc5.

[f.fainelli@gmail.com: revive and update for xarray implementation]
[f.fainelli@gmail.com: guard against a NULL node in the while loop]
  Link: https://lkml.kernel.org/r/20230405222743.1191674-1-f.fainelli@gmail.com
Link: https://lkml.kernel.org/r/20230404214049.1016811-1-f.fainelli@gmail.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:39:33 -07:00
Peng Liu
8fc2a304f5 scripts/gdb: fix lx-timerlist for HRTIMER_MAX_CLOCK_BASES printing
HRTIMER_MAX_CLOCK_BASES is of enum type hrtimer_base_type.  To print it as
an integer, HRTIMER_MAX_CLOCK_BASES should be converted first.

Link: https://lkml.kernel.org/r/TYCP286MB214640FF0E7F04AC3926A39EC6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:39:31 -07:00
Peng Liu
7362042f35 scripts/gdb: fix lx-timerlist for Python3
Below incompatibilities between Python2 and Python3 made lx-timerlist fail
to run under Python3.

o xrange() is replaced by range() in Python3
o bytes and str are different types in Python3
o the return value of Inferior.read_memory() is memoryview object in
  Python3

akpm: cc stable so that older kernels are properly debuggable under newer
Python.

Link: https://lkml.kernel.org/r/TYCP286MB2146EE1180A4D5176CBA8AB2C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:39:31 -07:00
Peng Liu
747cd84f67 scripts/gdb: fix lx-timerlist for struct timequeue_head change
commit 511885d706 ("lib/timerqueue: Rely on rbtree semantics for next
timer") changed struct timerqueue_head, and so print_active_timers()
should be changed accordingly with its way to interpret the structure.

Link: https://lkml.kernel.org/r/TYCP286MB21463BD277330B26DDC18903C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:39:31 -07:00
Pankaj Raghav
b4aff7513d scripts/gdb: use mem instead of core_layout to get the module address
commit ac3b432839 ("module: replace module_layout with module_memory")
changed the struct module data structure from module_layout to
module_memory. The core_layout member which is used while loading
modules are not available anymore leading to the following error while
running gdb:

(gdb) lx-symbols
loading vmlinux
Python Exception <class 'gdb.error'>: There is no member named core_layout.
Error occurred in Python: There is no member named core_layout.

Replace core_layout with its new counterpart mem[MOD_TEXT].

Fixes: ac3b432839 ("module: replace module_layout with module_memory")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13 14:03:25 -07:00
Florian Fainelli
f19c3c2959 scripts/gdb: bail early if there are no generic PD
Avoid generating an exception if there are no generic power domain(s)
registered:

(gdb) lx-genpd-summary
domain                          status          children
    /device                                             runtime status
----------------------------------------------------------------------
Python Exception <class 'gdb.error'>: No symbol "gpd_list" in current context.
Error occurred in Python: No symbol "gpd_list" in current context.
(gdb) quit

[f.fainelli@gmail.com: correctly invoke gdb_eval_or_none]
  Link: https://lkml.kernel.org/r/20230327185746.3856407-1-f.fainelli@gmail.com
Link: https://lkml.kernel.org/r/20230323231659.3319941-1-f.fainelli@gmail.com
Fixes: 8207d4a88e ("scripts/gdb: add lx-genpd-summary command")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-08 13:45:38 -07:00
Florian Fainelli
1d7adbc74c scripts/gdb: bail early if there are no clocks
Avoid generating an exception if there are no clocks registered:

(gdb) lx-clk-summary
                                 enable  prepare  protect
   clock                          count    count    count        rate
------------------------------------------------------------------------
Python Exception <class 'gdb.error'>: No symbol "clk_root_list" in
current context.
Error occurred in Python: No symbol "clk_root_list" in current context.

Link: https://lkml.kernel.org/r/20230323225246.3302977-1-f.fainelli@gmail.com
Fixes: d1e9710b63 ("scripts/gdb: initial clk support: lx-clk-summary")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-08 13:45:38 -07:00
Glenn Washburn
6d51363d53 scripts/gdb: support getting current task struct in UML
A running x86 UML kernel reports with architecture "i386:x86-64" as it is
a sub-architecture.  However, a difference with bare-metal x86 kernels is
in how it manages tasks and the current task struct.  To identify that the
inferior is a UML kernel and not bare-metal, check for the existence of
the UML specific symbol "cpu_tasks" which contains the current task
struct.

Link: https://lkml.kernel.org/r/b839d611e2906ccef2725c34d8e353fab35fe75e.1677469905.git.development@efficientek.com
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Anton Ivanov <anton.ivanov@kot-begemot.co.uk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-08 13:45:37 -07:00
Glenn Washburn
56fe487062 scripts/gdb: correct indentation in get_current_task
Patch series "scripts/gdb: Support getting current task struct in UML",
v3.

A running x86 UML kernel reports with architecture "i386:x86-64" as it is
a sub-architecture.  However, a difference with bare-metal x86 kernels is
in how it manages tasks and the current task struct.  To identify that the
inferior is a UML kernel and not bare-metal, check for the existence of
the UML specific symbol "cpu_tasks" which contains the current task
struct.


This patch (of 3):

There is an extra space in a couple blocks in get_current_task.  Though
python does not care, let's make the spacing consistent.  Also, format
better an if expression, removing unneeded parenthesis.

Link: https://lkml.kernel.org/r/cover.1677469905.git.development@efficientek.com
Link: https://lkml.kernel.org/r/2e117b82240de6893f27cb6507242ce455ed7b5b.1677469905.git.development@efficientek.com
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Anton Ivanov <anton.ivanov@kot-begemot.co.uk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-08 13:45:36 -07:00
Linus Torvalds
d2980d8d82 There is no particular theme here - mainly quick hits all over the tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which enhances
 and fixes zlib's use of S390 hardware support: "lib/zlib: Set of s390
 DFLTCC related patches for kernel zlib".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/QC4QAKCRDdBJ7gKXxA
 jtKdAQCbDCBdY8H45d1fONzQW2UDqCPnOi77MpVUxGL33r+1SAEA807C7rvDEmlf
 yP1Ft+722fFU5jogVU8ZFh+vapv2/gI=
 =Q9YK
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "There is no particular theme here - mainly quick hits all over the
  tree.

  Most notable is a set of zlib changes from Mikhail Zaslonko which
  enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
  of s390 DFLTCC related patches for kernel zlib'"

* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
  Update CREDITS file entry for Jesper Juhl
  sparc: allow PM configs for sparc32 COMPILE_TEST
  hung_task: print message when hung_task_warnings gets down to zero.
  arch/Kconfig: fix indentation
  scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
  nilfs2: prevent WARNING in nilfs_dat_commit_end()
  lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
  lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
  lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
  lib/zlib: DFLTCC support inflate with small window
  lib/zlib: Split deflate and inflate states for DFLTCC
  lib/zlib: DFLTCC not writing header bits when avail_out == 0
  lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
  lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
  lib/zlib: implement switching between DFLTCC and software
  lib/zlib: adjust offset calculation for dfltcc_state
  nilfs2: replace WARN_ONs for invalid DAT metadata block requests
  scripts/spelling.txt: add "exsits" pattern and fix typo instances
  fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
  cramfs: Kconfig: fix spelling & punctuation
  ...
2023-02-23 17:55:40 -08:00
Jeff Xie
c16a3b11ea scripts/gdb: fix 'lx-current' for x86
When printing the name of the current process, it will report an error:
(gdb) p $lx_current().comm Python Exception <class 'gdb.error'> No symbol
"current_task" in current context.: Error occurred in Python: No symbol
"current_task" in current context.

Because e57ef2ed97 ("x86: Put hot per CPU variables into a struct")
changed it.

Link: https://lkml.kernel.org/r/20230204090139.1789264-1-xiehuan09@gmail.com
Fixes: e57ef2ed97 ("x86: Put hot per CPU variables into a struct")
Signed-off-by: Jeff Xie <xiehuan09@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-09 15:56:51 -08:00
Dmitrii Bundin
e36903b0c1 scripts/gdb: add mm introspection utils
This command provides a way to traverse the entire page hierarchy by a
given virtual address on x86.  In addition to qemu's commands info
tlb/info mem it provides the complete information about the paging
structure for an arbitrary virtual address.  It supports 4KB/2MB/1GB and 5
level paging.

Here is an example output for 2MB success translation:

(gdb) translate-vm address
cr3:
    cr3 binary data                0x1085be003
    next entry physical address   0x1085be000
    ---
    bit  3          page level write through       False
    bit  4          page level cache disabled      False
level 4:
    entry address                  0xffff8881085be7f8
    page entry binary data         0x800000010ac83067
    next entry physical address   0x10ac83000
    ---
    bit  0          entry present                  True
    bit  1          read/write access allowed      True
    bit  2          user access allowed            True
    bit  3          page level write through       False
    bit  4          page level cache disabled      False
    bit  5          entry has been accessed        True
    bit  7          page size                      False
    bit  11         restart to ordinary            False
    bit  63         execute disable                True
level 3:
    entry address                  0xffff88810ac83a48
    page entry binary data         0x101af7067
    next entry physical address   0x101af7000
    ---
    bit  0          entry present                  True
    bit  1          read/write access allowed      True
    bit  2          user access allowed            True
    bit  3          page level write through       False
    bit  4          page level cache disabled      False
    bit  5          entry has been accessed        True
    bit  7          page size                      False
    bit  11         restart to ordinary            False
    bit  63         execute disable                False
level 2:
    entry address                  0xffff888101af7368
    page entry binary data         0x80000001634008e7
    page size                      2MB
    page physical address         0x163400000
    ---
    bit  0          entry present                  True
    bit  1          read/write access allowed      True
    bit  2          user access allowed            True
    bit  3          page level write through       False
    bit  4          page level cache disabled      False
    bit  5          entry has been accessed        True
    bit  7          page size                      True
    bit  6          page dirty                     True
    bit  8          global translation             False
    bit  11         restart to ordinary            True
    bit  12         pat                            False
    bits (59, 62)   protection key                 0
    bit  63         execute disable                True

[dmitrii.bundin.a@gmail.com: add SPDX line, other tweaks]
  Link: https://lkml.kernel.org/r/20230113175151.22278-1-dmitrii.bundin.a@gmail.com
[akpm@linux-foundation.org: s/physicall/physical/]
Link: https://lkml.kernel.org/r/20230102171014.31408-1-dmitrii.bundin.a@gmail.com
Signed-off-by: Dmitrii Bundin <dmitrii.bundin.a@gmail.com>
Acked by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-02 22:50:03 -08:00
Linus Torvalds
eb5699ba31 Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA
 jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9
 kwS/13j38guulSlXRzDLmitbg81zAAI=
 =Zfum
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc updates from Andrew Morton:
 "Updates to various subsystems which I help look after. lib, ocfs2,
  fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
  material this time"

* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
  scripts/gdb: ensure the absolute path is generated on initial source
  MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
  mailmap: add linux.dev alias for Brendan Higgins
  mailmap: update Kirill's email
  profile: setup_profiling_timer() is moslty not implemented
  ocfs2: fix a typo in a comment
  ocfs2: use the bitmap API to simplify code
  ocfs2: remove some useless functions
  lib/mpi: fix typo 'the the' in comment
  proc: add some (hopefully) insightful comments
  bdi: remove enum wb_congested_state
  kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
  lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
  squashfs: support reading fragments in readahead call
  squashfs: implement readahead
  squashfs: always build "file direct" version of page actor
  Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
  fs/ocfs2: Fix spelling typo in comment
  ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
  proc: fix test for "vsyscall=xonly" boot option
  ...
2022-08-07 10:03:24 -07:00
Linus Torvalds
a1b02751d6 Sane printk changes for 5.20
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmLrn3IACgkQUqAMR0iA
 lPK7pBAAkcfykKgtRxvE65q06GsClGJMVM6wDe0iG0m71gRItz46Yly5HbuwaAwx
 6DEQOlMnndjr8syznl/SoiIiAQcDGjzG8ZVcYw6JH4um03mk6uQw6YuKwxO8kieC
 2/ZdFOVsHfui6lVXGxizi8UzT+oemXax5JsukOD5MsEOPAv+rw6vg5hrSiIFoQaO
 /nU8BeulfuZrnhz47xiNNxQWi7J3F0JVF4NlwK+avOhVw7kUgZcmsojQHopvQOxU
 e2HuByZ/9TkbNoQX/0ZX8aZ75XbebCfX9o39J4bLAUe4eqzOHDTEKg29BoXogSk4
 NVjNVuVljmwcExox70Esst8Ckir2/DE7I5nKZ0/G+9JNoHKoHaG3rkZ3hqf5Q/Vh
 eahwRxab/NguUAZawk3NWpZ6B6dql8H6G+UhG0nsSTbUCLy5o02ynfai52TIhzb1
 EPFVRSBWefiPHFtC86yyXE/3iZvgpJk72jXoVLEvBXHAGxkAD3UbaV+5PgYgFwNh
 TZO9u7tEe6Z67Cs3GZ7YfYPraULh5JmRkFgZMs04ycBRO9oQWdlaaR/UzZJ/P1TF
 IY8sYXDBFLeXGtDB65UMPlHymDm3Bcu0C7YSPa1rxuqlmsmDvYY/nxnDC/TOPYnp
 /jeRuoZ2IpuUL2XIHmIZQ6v8mYTetFkQMqC9qxZSCw3wqjW6Mwk=
 =PJYM
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-5.20-sane' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk updates from Petr Mladek:

 - Allow reading kernel log in gdb even on 32 bits systems

 - More granular check of the buffer usage in printf selftest

 - Clang warning fix

* tag 'printk-for-5.20-sane' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  lib/test_printf.c: fix clang -Wformat warnings
  scripts/gdb: fix 'lx-dmesg' on 32 bits arch
  lib/test_printf.c: split write-beyond-buffer check in two
2022-08-05 09:54:36 -07:00
Aaron Tomlin
b99695580b scripts/gdb: ensure the absolute path is generated on initial source
Post 'make scripts_gdb' a symbolic link to scripts/gdb/vmlinux-gdb.py is
created.  Currently 'os.path.dirname(__file__)' does not generate the
absolute path to scripts/gdb resulting in the following:

    (gdb) source vmlinux-gdb.py
    Traceback (most recent call last):
      File "scripts/gdb/vmlinux-gdb.py", line 25, in <module>
	import linux.utils
    ModuleNotFoundError: No module named 'linux'

This patch ensures that the absolute path to scripts/gdb in relation to
the given file is generated so each module can be located accordingly.

Link: https://lkml.kernel.org/r/20220712110248.1404125-1-atomlin@redhat.com
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-29 18:12:37 -07:00
Khalid Masum
23a67619bc scripts/gdb: Fix gdb 'lx-symbols' command
Currently the command 'lx-symbols' in gdb exits with the error`Function
"do_init_module" not defined in "kernel/module.c"`. This occurs because
the file kernel/module.c was moved to kernel/module/main.c.

Fix this breakage by changing the path to "kernel/module/main.c" in
LoadModuleBreakpoint.

Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Fixes: cfc1d27789 ("module: Move all into module/")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-21 10:40:55 -07:00