Merge cpuidle changes, PM core changes and power capping changes for
6.1-rc1:
- Add AlderLake-N support to intel_idle (Zhang Rui).
- Replace strlcpy() with unused retval with strscpy() in intel_idle
(Wolfram Sang).
- Remove redundant check from cpuidle_switch_governor() (Yu Liao).
- Replace strlcpy() with unused retval with strscpy() in the powernv
cpuidle driver (Wolfram Sang).
- Drop duplicate word from a comment in the coupled cpuidle driver
(Jason Wang).
- Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
in the flags and the device is about to resume (Rafael Wysocki).
- Add extra debugging statement for multiple active IRQs to system
wakeup handling code (Mario Limonciello).
- Replace strlcpy() with unused retval with strscpy() in the core
system suspend support code (Wolfram Sang).
- Update the intel_rapl power capping driver:
* Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
* Add support for RAPTORLAKE_S (Zhang Rui).
* Fix UBSAN shift-out-of-bounds issue (Chao Qin).
* pm-cpuidle:
intel_idle: Add AlderLake-N support
cpuidle: Remove redundant check in cpuidle_switch_governor()
intel_idle: move from strlcpy() with unused retval to strscpy()
cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
cpuidle: coupled: Drop duplicate word from a comment
* pm-core:
PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
* pm-sleep:
PM: wakeup: Add extra debugging statement for multiple active IRQs
PM: suspend: move from strlcpy() with unused retval to strscpy()
* powercap:
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
powercap: intel_rapl: Add support for RAPTORLAKE_S
Merge cpufreq changes for 6.1-rc1:
- Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
Smythies).
- Update the AMD P-state driver (Perry Yuan):
* Fix wrong lowest perf fetch.
* Map desired perf into pstate scope for powersave governor.
* Update pstate frequency transition delay time.
* Fix initial highest_perf value.
* Clean up.
- Move max CPU capacity to sugov_policy in the schedutil cpufreq
governor (Lukasz Luba).
- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
- Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
and Yang Yingliang).
- Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
and Viresh Kumar).
- Minor cleanups around functions called at module_init() (Xiu Jianfeng).
- Use module_init and add module_exit for bmips driver (Zhang Jianhua).
* pm-cpufreq:
cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
cpufreq: Add __init annotation to module init funcs
cpufreq: tegra194: change tegra239_cpufreq_soc to static
cpufreq: tegra194: Add support for Tegra239
cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
cpufreq: amd-pstate: Fix initial highest_perf value
cpufreq: tegra194: Remove the unneeded result variable
cpufreq: amd-pstate: update pstate frequency transition delay time
cpufreq: amd_pstate: map desired perf into pstate scope for powersave governor
cpufreq: amd_pstate: fix wrong lowest perf fetch
cpufreq: amd-pstate: fix white-space
cpufreq: amd-pstate: simplify cpudata pointer assignment
cpufreq: bmips-cpufreq: Use module_init and add module_exit
cpufreq: schedutil: Move max CPU capacity to sugov_policy
cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist
Merge ACPI _UID handling unification changes for 6.1-rc1:
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into an
integer value (Andy Shevchenko).
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko).
* acpi-uid:
efi/dev-path-parser: Refactor _UID handling to use acpi_dev_uid_to_integer()
spi: pxa2xx: Refactor _UID handling to use acpi_dev_uid_to_integer()
perf: qcom_l2_pmu: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: mlxbf: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: amd-mp2-plat: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: x86: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: LPSS: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: utils: Add acpi_dev_uid_to_integer() helper to get _UID as integer
Merge miscellaneous ACPI material, ACPI tools changes and ACPI
documentation updates for 6.1-rc1:
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki).
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang).
- Do not initialize ret in main() in the pfrut utility (Shi junming).
- Drop useless ACPI DSDT override documentation (Rafael Wysocki).
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare).
* acpi-misc:
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: move from strlcpy() with unused retval to strscpy()
* acpi-tools:
ACPI: tools: pfrut: Do not initialize ret in main()
* acpi-docs:
ACPI: docs: Drop useless DSDT override documentation
ACPI: docs: enumeration: Fix a few typos and wording mistakes
Merge EC, AC, fan and backlight driver changes and ACPI AMBA support
update for 6.1-rc1:
- Drop unneeded result variable from ec_write() (ye xingchen).
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun
Guo).
- Reorder symbols to get rid of a few forward declarations in the ACPI
fan driver (Uwe Kleine-König).
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander).
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam).
* acpi-ec:
ACPI: EC: Drop unneeded result variable from ec_write()
* acpi-ac:
ACPI: AC: Remove the leftover struct acpi_ac_bl
* acpi-fan:
ACPI: fan: Reorder symbols to get rid of a few forward declarations
* acpi-video:
ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
* acpi-amba:
ACPI: AMBA: Add ARM DMA-330 controller to the supported list
Merge new material related to CPPC, PCC, APEI and OSI strings handling
for 6.1-rc1:
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).
- Fix Tx acknowledge in the PCC address space handler (Huisong Li).
- Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
Li).
- Release resources on PCC address space setup failure path (Rafael
Mendonca).
- Remove unneeded result variables from APEI code (ye xingchen).
- Print total number of records found during BERT log parsing (Dmitry
Monakhov).
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello).
* acpi-cppc:
ACPI: CPPC: Disable FIE if registers in PCC regions
ACPI: CPPC: Add ACPI disabled check to acpi_cpc_valid()
* acpi-pcc:
ACPI: PCC: Fix Tx acknowledge in the PCC address space handler
ACPI: PCC: replace wait_for_completion()
ACPI: PCC: Release resources on address space setup failure path
* acpi-apei:
ACPI: APEI: Remove unneeded result variables
ACPI: APEI: Add BERT error log footer
* acpi-osi:
ACPI: OSI: Update Documentation on custom _OSI strings
ACPI: OSI: Remove Linux-HPI-Hybrid-Graphics _OSI string
ACPI: OSI: Remove Linux-Lenovo-NV-HDMI-Audio _OSI string
ACPI: OSI: Remove Linux-Dell-Video _OSI string
but a few significant changes even so:
- A complete rewriting of the top-level index.rst file, which mostly
reflects itself in a redone top page in the HTML-rendered docs. The hope
is that the new organization will be a friendlier starting point for
both users and developers.
- Some math-rendering improvements.
- A coding-style.rst update on the use of BUG() and WARN()
- A big maintainer-PHP guide update.
- Some code-of-conduct updates
- More Chinese translation work
Plus the usual pile of typo fixes, corrections, and updates.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmM7BksPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y8i4H/ihd1ppgVYy1yvFL3L1KkcsNyt3bFUa6hide
qmkhqpzjsNmbTOaW19Y6epCzRzvxG7M9hzztIewt1BhRDvgRC8GaQNNRw/IBs0B6
kprisINC2/ap4JjCroYWepfd+H8NSiVxqtd8hVSMWDSh2cK9vw0qVqQq59I+gght
64pA4F2nPO6bamZzAELTdWRj0ITL1A/V/jYj+T074B094arc4HyekIQ5Jn9GTCmt
jFBH9yxAb3l8K7KgzH7FgxKY/an0HxKDh4Cnx2Jv+dcocgCwy1iXCuyEZbFd9GEB
UyhPcCyrIe/I2B9U9LrqLvXA8LW7jwE+MZMqZpaRkxcIdE2gEFQ=
=M7tR
-----END PGP SIGNATURE-----
Merge tag 'docs-6.1' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There's not a huge amount of activity in the docs tree this time
around, but a few significant changes even so:
- A complete rewriting of the top-level index.rst file, which mostly
reflects itself in a redone top page in the HTML-rendered docs. The
hope is that the new organization will be a friendlier starting
point for both users and developers.
- Some math-rendering improvements.
- A coding-style.rst update on the use of BUG() and WARN()
- A big maintainer-PHP guide update.
- Some code-of-conduct updates
- More Chinese translation work
Plus the usual pile of typo fixes, corrections, and updates"
* tag 'docs-6.1' of git://git.lwn.net/linux: (66 commits)
checkpatch: warn on usage of VM_BUG_ON() and other BUG variants
coding-style.rst: document BUG() and WARN() rules ("do not crash the kernel")
Documentation: devres: add missing IO helper
Documentation: devres: update IRQ helper
Documentation/mm: modify page_referenced to folio_referenced
Documentation/CoC: Reflect current CoC interpretation and practices
docs/doc-guide: Add documentation on SPHINX_IMGMATH
docs: process/5.Posting.rst: clarify use of Reported-by: tag
docs, kprobes: Fix the wrong location of Kprobes
docs: add a man-pages link to the front page
docs: put atomic*.txt and memory-barriers.txt into the core-api book
docs: move asm-annotations.rst into core-api
docs: remove some index.rst cruft
docs: reconfigure the HTML left column
docs: Rewrite the front page
docs: promote the title of process/index.rst
Documentation: devres: add missing SPI helper
Documentation: devres: add missing PINCTRL helpers
docs: hugetlbpage.rst: fix a typo of hugepage size
docs/zh_CN: Add new translation of admin-guide/bootconfig.rst
...
This pull request contains the following branches:
doc.2022.08.31b: Documentation updates. This is the first in a series
from an ongoing review of the RCU documentation. "Why are people
thinking -that- about RCU? Oh. Because that is an entirely
reasonable interpretation of its documentation."
fixes.2022.08.31b: Miscellaneous fixes.
kvfree.2022.08.31b: Improved memory allocation and heuristics.
nocb.2022.09.01a: Improve rcu_nocbs diagnostic output.
poll.2022.08.31b: Add full-sized polled RCU grace period state values.
These are the same size as an rcu_head structure, which is double
that of the traditional unsigned long state values that may still
be obtained from et_state_synchronize_rcu(). The added size
avoids missing overlapping grace periods. This benefit is that
call_rcu() can be replaced by polling, which can be attractive
in situations where RCU-protected data is aged out of memory.
Early in the series, the size of this state value is three
unsigned longs. Later in the series, the synchronize_rcu() and
synchronize_rcu_expedited() fastpaths are reworked to permit
the full state to be represented by only two unsigned longs.
This reworking slows these two functions down in SMP kernels
running either on single-CPU systems or on systems with all but
one CPU offlined, but this should not be a significant problem.
And if it somehow becomes a problem in some yet-as-unforeseen
situations, three-value state values can be provided for only
those situations.
Finally, a pair of functions named same_state_synchronize_rcu()
and same_state_synchronize_rcu_full() allow grace-period state
values to be compared for equality. This permits users to
maintain lists of data structures having the same state value,
removing the need for per-data-structure grace-period state
values, thus decreasing memory footprint.
poll-srcu.2022.08.31b: Polled SRCU grace-period updates, including
adding tests to rcutorture and reducing the incidence of Tiny
SRCU grace-period-state counter wrap.
tasks.2022.08.31b: Improve Tasks RCU diagnostics and quiescent-state
detection.
-----BEGIN PGP SIGNATURE-----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=AZPZ
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates.
This is the first in a series from an ongoing review of the RCU
documentation. "Why are people thinking -that- about RCU? Oh. Because
that is an entirely reasonable interpretation of its documentation."
- Miscellaneous fixes.
- Improved memory allocation and heuristics.
- Improve rcu_nocbs diagnostic output.
- Add full-sized polled RCU grace period state values.
These are the same size as an rcu_head structure, which is double
that of the traditional unsigned long state values that may still be
obtained from et_state_synchronize_rcu(). The added size avoids
missing overlapping grace periods. This benefit is that call_rcu()
can be replaced by polling, which can be attractive in situations
where RCU-protected data is aged out of memory.
Early in the series, the size of this state value is three unsigned
longs. Later in the series, the fastpaths in synchronize_rcu() and
synchronize_rcu_expedited() are reworked to permit the full state to
be represented by only two unsigned longs. This reworking slows these
two functions down in SMP kernels running either on single-CPU
systems or on systems with all but one CPU offlined, but this should
not be a significant problem. And if it somehow becomes a problem in
some yet-as-unforeseen situations, three-value state values can be
provided for only those situations.
Finally, a pair of functions named same_state_synchronize_rcu() and
same_state_synchronize_rcu_full() allow grace-period state values to
be compared for equality. This permits users to maintain lists of
data structures having the same state value, removing the need for
per-data-structure grace-period state values, thus decreasing memory
footprint.
- Polled SRCU grace-period updates, including adding tests to
rcutorture and reducing the incidence of Tiny SRCU grace-period-state
counter wrap.
- Improve Tasks RCU diagnostics and quiescent-state detection.
* tag 'rcu.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (55 commits)
rcutorture: Use the barrier operation specified by cur_ops
rcu-tasks: Make RCU Tasks Trace check for userspace execution
rcu-tasks: Ensure RCU Tasks Trace loops have quiescent states
rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE()
srcu: Make Tiny SRCU use full-sized grace-period counters
srcu: Make Tiny SRCU poll_state_synchronize_srcu() more precise
srcu: Add GP and maximum requested GP to Tiny SRCU rcutorture output
rcutorture: Make "srcud" option also test polled grace-period API
rcutorture: Limit read-side polling-API testing
rcu: Add functions to compare grace-period state values
rcutorture: Expand rcu_torture_write_types() first "if" statement
rcutorture: Use 1-suffixed variable in rcu_torture_write_types() check
rcu: Make synchronize_rcu() fastpath update only boot-CPU counters
rcutorture: Adjust rcu_poll_need_2gp() for rcu_gp_oldstate field removal
rcu: Remove ->rgos_polled field from rcu_gp_oldstate structure
rcu: Make synchronize_rcu_expedited() fast path update .expedited_sequence
rcu: Remove expedited grace-period fast-path forward-progress helper
rcu: Make synchronize_rcu() fast path update ->gp_seq counters
rcu-tasks: Remove grace-period fast-path rcu-tasks helper
rcu: Set rcu_data structures' initial ->gpwrap value to true
...
This pull request provides nolibc updates, most notably greatly improved
testing. These tests are located in tools/testing/selftests/nolibc. The
output of "make help" is as follows:
Supported targets under selftests/nolibc:
all call the "run" target below
help this help
sysroot create the nolibc sysroot here (uses $ARCH)
nolibc-test build the executable (uses $CC and $CROSS_COMPILE)
initramfs prepare the initramfs with nolibc-test
defconfig create a fresh new default config (uses $ARCH)
kernel (re)build the kernel with the initramfs (uses $ARCH)
run runs the kernel in QEMU after building it (uses $ARCH, $TEST)
rerun runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST)
clean clean the sysroot, initramfs, build and output files
The output file is "run.out". Test ranges may be passed using $TEST.
Currently using the following variables:
ARCH = x86
CROSS_COMPILE =
CC = gcc
OUTPUT = /home/git/linux-rcu/tools/testing/selftests/nolibc/
TEST =
QEMU_ARCH = x86_64 [determined from $ARCH]
IMAGE_NAME = bzImage [determined from $ARCH]
The output of a successful x86 "make run" is currently as follows,
with kernel build output omitted:
$ make run
71 test(s) passed.
$
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmM5AeATHHBhdWxtY2tA
a2VybmVsLm9yZwAKCRCevxLzctn7jJCLD/wIps8OlIvNMlvT0Bwmi1gG6kTdJrXb
Cj495z9F1P8c1x2nZBVuwPM05KM4SUvMLBzkND8le/AqrDP2Vc9WurEjnx6aYbjw
aNrWeeVOYF2ykROpEyolF92bV0tu2aZEYmZ12Rxb3ybKYW8wf5t2M6JbU9VvLATB
TNPov6cBUjJLqF5AVf4pJ3FNjGJH392NyTzGuKFYN4kK8XGPSxKFfpb8jJX/Jnr/
OQPZZurHclgIJzWYwjWpWBY5NBEMSUI8K2KqQIFzeVdNGpWmAyAyciCDG3zD+Rp1
GtcHrPEgvBQnPd5o89eZonMPHkIC5kOVU3Ebwzzx30GWQO8cseCZCb9foJCu918q
wbJYPvopDw1Kd7NtltTzWj/xWkINgBcqdki5bEtcOW8i71RX8tgzUVx/tz771Vok
/j21se9Svwi8ZnAY+dTxMNdy0Jd7eI0dJO6fMzagrQamDKZzNaO50WjiCW53/Eln
JSttwSneWJ190PJ5ty6lNQ6OLGuILSXWhbYzRplgHiEcSwjtpxccgMRkiNQlQiow
hXRNKQU/A7q3b5HPpf/kdQFGEk/aqFNDTpTuz1JCsCY2f9WQ6qz5stQuUKfFxyVh
YD82JBI1DHtucs5dD/4ZbparHrJGG/NsHoe61wZYpXVrcJWfB0bMiie3zQ1cGoWN
t6lw39lNotQbsw==
=wqBE
-----END PGP SIGNATURE-----
Merge tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
"Most notably greatly improved testing. These tests are located in
tools/testing/selftests/nolibc. The output of "make help" is as
follows:
Supported targets under selftests/nolibc:
all call the "run" target below
help this help
sysroot create the nolibc sysroot here (uses $ARCH)
nolibc-test build the executable (uses $CC and $CROSS_COMPILE)
initramfs prepare the initramfs with nolibc-test
defconfig create a fresh new default config (uses $ARCH)
kernel (re)build the kernel with the initramfs (uses $ARCH)
run runs the kernel in QEMU after building it (uses $ARCH, $TEST)
rerun runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST)
clean clean the sysroot, initramfs, build and output files
The output file is "run.out". Test ranges may be passed using $TEST.
Currently using the following variables:
ARCH = x86
CROSS_COMPILE =
CC = gcc
OUTPUT = /home/git/linux-rcu/tools/testing/selftests/nolibc/
TEST =
QEMU_ARCH = x86_64 [determined from $ARCH]
IMAGE_NAME = bzImage [determined from $ARCH]
The output of a successful x86 "make run" is currently as follows,
with kernel build output omitted:
$ make run
71 test(s) passed."
* tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: Avoid generated files being committed
selftests/nolibc: add a "help" target
selftests/nolibc: "sysroot" target installs a local copy of the sysroot
selftests/nolibc: add a "run" target to start the kernel in QEMU
selftests/nolibc: add a "defconfig" target
selftests/nolibc: add a "kernel" target to build the kernel with the initramfs
selftests/nolibc: support glibc as well
selftests/nolibc: condition some tests on /proc existence
selftests/nolibc: recreate and populate /dev and /proc if missing
selftests/nolibc: on x86, support exiting with isa-debug-exit
selftests/nolibc: exit with poweroff on success when getpid() == 1
selftests/nolibc: add a few tests for some libc functions
selftests/nolibc: implement a few tests for various syscalls
selftests/nolibc: support a test definition format
selftests/nolibc: add basic infrastructure to ease creation of nolibc tests
tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition
tools/nolibc: fix build warning in sys_mmap() when my_syscall6 is not defined
tools/nolibc: make argc 32-bit in riscv startup code
Three fixes for ARM:
- unbreak the RiscPC build
- fix wrong pg_level in page table dumper
- make MT_MEMORY_RO really read-only with LPAE
-----BEGIN PGP SIGNATURE-----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=OXHm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Three fixes for ARM:
- unbreak the RiscPC build
- fix wrong pg_level in page table dumper
- make MT_MEMORY_RO really read-only with LPAE"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE
ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()
ARM: 9243/1: riscpc: Unbreak the build
- Fix forward secrecy of RNG seed boot record handling,
- Make RNG seed boot record handling generic for all m68k platforms
using bootinfo,
- Defconfig updates,
- Minor fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYzq9BBUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XA1xgEA4GWu3plxqwzhnMQjHIWxbWL0O5jo
96l6xFfZpF3qPN8A/2QQ/aZg4zKGCDwz6OFFI7muesfYJvQFeAum1JTAMzYC
=U0TY
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Fix forward secrecy of RNG seed boot record handling
- Make RNG seed boot record handling generic for all m68k platforms
using bootinfo
- defconfig updates
- Minor fixes and improvements
* tag 'm68k-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Rework BI_VIRT_RNG_SEED as BI_RNG_SEED
m68k: Process bootinfo records before saving them
m68k: defconfig: Update defconfigs for v6.0-rc2
m68k: Allow kexec on M68KCLASSIC with MMU enabled only
m68k: Move from strlcpy with unused retval to strscpy
Sphinx reported warnings on missing implementation notes documentations in the
table of contents:
Documentation/bpf/clang-notes.rst: WARNING: document isn't included in any toctree
Documentation/bpf/linux-notes.rst: WARNING: document isn't included in any toctree
Add these documentations to the table of contents (index.rst) of BPF
documentation to fix the warnings.
Link: https://lore.kernel.org/linux-doc/202210020749.yfgDZbRL-lkp@intel.com/
Fixes: 6c7aaffb24 ("bpf, docs: Move Clang notes to a separate file")
Fixes: 6166da0a02 ("bpf, docs: Move legacy packet instructions to a separate file")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20221002032022.24693-1-bagasdotme@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:
- A new string helper parse_int_array_user().
- Improvements to the SOF IPC4 code, especially around trace.
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
and Texas Instruments SRC4392
There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmM6tu0ACgkQJNaLcl1U
h9BHFQf9Ew/yLSHRdeJwNUEb4VjnRtXz+DLQbGeZBNnk/7Yt/STd0EaudUl0OuiJ
+Ok4bLN6/47bwp5OB0kRGdTVycUq+rR2niJu4dgcY0MkfJi7Pyumibp/biips5rw
+Qzj8oOUPu1970zmOktuy84ZY9Ikl02UEQYyUFVL1AJM3aUzfa/gQ24UCEyA2WxD
ai7TcnUf2+zkMzqvfwFeW3avLSh+9ZLRgHHB52VNQXLHO5+YDvmMmyKZydon67n1
+3QZOS57rQRXUgBOraq+AojTXs9gTFXmF8ujD1eA2qL33vqeZaf7upx76a3U/Rm+
9m+6JucR1qrJyErag2nX90HQOvUcxA==
=kv8c
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.1
This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:
- A new string helper parse_int_array_user().
- Improvements to the SOF IPC4 code, especially around trace.
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
and Texas Instruments SRC4392
There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.
Christophe Leroy reported a ~80ms latency spike
happening at first TCP connect() time.
This is because __inet_hash_connect() uses get_random_once()
to populate a perturbation table which became quite big
after commit 4c2c8f03a5 ("tcp: increase source port perturb table to 2^16")
get_random_once() uses DO_ONCE(), which block hard irqs for the duration
of the operation.
This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock
for operations where we prefer to stay in process context.
Then __inet_hash_connect() can use get_random_slow_once()
to populate its perturbation table.
Fixes: 4c2c8f03a5 ("tcp: increase source port perturb table to 2^16")
Fixes: 190cc82489 ("tcp: change source port randomizarion at connect() time")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/netdev/CANn89iLAEYBaoYajy0Y9UmGFff5GPxDUoG-ErVB2jDdRNQ5Tug@mail.gmail.com/T/#t
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot is hitting skb_assert_len() warning at raw_sendmsg() for ieee802154
socket. What commit dc633700f0 ("net/af_packet: check len when
min_header_len equals to 0") does also applies to ieee802154 socket.
Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4
Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com>
Fixes: fd18942244 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
wwan_register_ops calls wwan_create_default_link, which ends up in the
ipc_wwan_newlink callback that locks ipc_wwan->if_mutex. However, this
mutex is not yet initialized by that point. Fix it by moving mutex_init
above the wwan_register_ops call. This also makes the order of
operations in ipc_wwan_init symmetric to ipc_wwan_deinit.
Fixes: 83068395bb ("net: iosm: create default link via WWAN core")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subbaraya Sundeep says:
====================
net: Introduce macsec hardware offload for cn10k platform
CN10K-B and CNF10K-B variaints of CN10K silicon has macsec block(MCS)
to encrypt and decrypt packets at MAC/hardware level. This block is a
global resource with hardware resources like SecYs, SCs and SAs
and is in between NIX block and RPM LMAC. CN10K-B silicon has only
one MCS block which receives packets from all LMACS whereas
CNF10K-B has seven MCS blocks for seven LMACs. Both MCS blocks are
similar in operation except for few register offsets and some
configurations require writing to different registers. This patchset
introduces macsec hardware offloading support. AF driver manages hardware
resources and PF driver consumes them when macsec hardware offloading
is needed.
Patch 1 adds basic pci driver for both CN10K-B and CNF10K-B
silicons and initializes hardware block.
Patches 2 and 3 adds mailboxes to init, reset and manage
resources of the MCS block
Patch 4 adds a low priority rule in MCS TCAM so that the
traffic which do not need macsec processing can be sent/received
Patch 5 adds macsec stats collection support
Patch 6 adds interrupt handling support and any event in which
AF consumer is interested can be notified via mbox notification
Patch 7 adds debugfs support which helps in debugging packet
path
Patch 8 introduces macsec hardware offload feature for
PF netdev driver.
v3 changes:
Fixed clang and sparse warnings
v2 changes:
Fix build error by changing #ifdef CONFIG_MACSEC to
#if IS_ENABLED(CONFIG_MACSEC)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the macsec offload feature to cn10k
PF netdev driver. The macsec offload ops like adding, deleting
and updating SecYs, SCs, SAs and stats are supported. XPN support
will be added in later patches. Some stats use same counter in hardware
which means based on the SecY mode the same counter represents different
stat. Hence when SecY mode/policy is changed then snapshot of current
stats are captured. Also there is no provision to specify the unique
flow-id/SCI per packet to hardware hence different mac address needs to
be set for macsec interfaces.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds debugfs entry to dump MCS secy, sc,
sa, flowid and port stats. This helps in debugging
the packet path and to figure out where exactly packet
was dropped.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware triggers an interrupt for events like PN wrap to zero,
PN crosses set threshold. This interrupt is received
by the MCS_AF. MCS AF then finds the PF/VF to which SA is mapped
and notifies them using mcs_intr_notify mbox message.
PF/VF using mcs_intr_cfg mbox can configure the list
of interrupts for which they want to receive the
notification from AF.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add mailbox messages to return the resource stats to the
caller. Stats of SecY, SC and SAs as per the macsec standard,
TCAM flow id hits/miss, mailbox to clear the stats are
implemented.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Out of all the TCAM entries, reserve last TX and RX TCAM flow
entry(low priority) so that normal traffic can be sent out and
received. The traffic which needs macsec processing hits the
high priority TCAM flows. Also install a FLR handler to free
the allocated resources for PF/VF.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To establish a macsec connection association netdev driver
needs hardware resources like SecY, TCAM flows, SCs and SAs.
This patch manages allocating, freeing and configuring those
resources. AF consumers can request resources and configure them
via these mailbox messages. AF can allocate until it runs out of
hardware resources.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are set of configurations to be done at MCS port level like
bringing port out of reset, making port as operational or bypass.
This patch adds all the port related mailbox message handlers
so that AF consumers can use them.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CN10K-B and CNF10K-B has macsec block(MCS) to encrypt and
decrypt packets at MAC level. This block is a global resource
with hardware resources like SecYs, SCs and SAs and is in
between NIX block and RPM LMAC. CN10K-B silicon has only one MCS
block which receives packets from all LMACS whereas CNF10K-B has
seven MCS blocks for seven LMACs. Both MCS blocks are
similar in operation except for few register offsets and some
configurations require writing to different registers. Those
differences between IPs are handled using separate ops.
This patch adds basic driver and does the initial hardware
calibration and parser configuration.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This frees "mac" and tries to display its address as part of the error
message on the next line. Swap the order.
Fixes: fd3040b939 ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur says:
====================
net: lan966x: Add police and mirror using tc-matchall
Add tc-matchall classifier offload support both for ingress and egress.
For this add support for the port police and port mirroring action support.
Port police can happen only on ingress while port mirroring is supported
both on ingress and egress
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for port mirroring. It is possible to mirror only one port
at a time and it is possible to have both ingress and egress mirroring.
Frames injected by the CPU don't get egress mirrored because they are
bypassing the analyzer module.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for port police. It is possible to police only on the
ingress side. To be able to add police support also it was required to
add tc-matchall classifier offload support.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DECnet was removed by commit 1202cdd665 ("Remove DECnet support from
kernel"). Let's also revome its flow structure.
Compile-tested only (allmodconfig).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x_tpa_stop() allocates a memory chunk from new_data with
bnx2x_frag_alloc(). The new_data should be freed when gets some error.
But when "pad + len > fp->rx_buf_size" is true, bnx2x_tpa_stop() returns
without releasing the new_data, which will lead to a memory leak.
We should free the new_data with bnx2x_frag_free() when "pad + len >
fp->rx_buf_size" is true.
Fixes: 07b0f00964 ("bnx2x: fix possible panic under memory stress")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove PTP_PF_EXTTS support for non-PCI11x1x devices since they do not support
the PTP-IO Input event triggered timestamping mechanisms added
Fixes: 60942c397a ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current GRO stack only supports incoming packets containing
one frame/MSS.
This patch changes GRO to accept packets that are already GRO.
HW-GRO (aka RSC for some vendors) is very often limited in presence
of interleaved packets. Linux SW GRO stack can complete the job
and provide larger GRO packets, thus reducing rate of ACK packets
and cpu overhead.
This also means BIG TCP can still be used, even if HW-GRO/RSC was
able to cook ~64 KB GRO packets.
v2: fix logic in tcp_gro_receive()
Only support TCP for the moment (Paolo)
Co-Developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the kemdup could return NULL, it should be better to check the return
value and return error if fails.
Moreover, the return value of prestera_acl_ruleset_keymask_set() should
be checked by cascade.
Fixes: 604ba23090 ("net: prestera: flower template support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Taras Chornyi<tchornyi@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Fastclose edge cases and error handling
MPTCP has existing code to use the MP_FASTCLOSE option header, which
works like a RST for the MPTCP-level connection (regular RSTs only
affect specific subflows in MPTCP). This series has some improvements
for fastclose.
Patch 1 aligns fastclose socket error handling with TCP RST behavior on
TCP sockets.
Patch 2 adds use of MP_FASTCLOSE in some more edge cases, like file
descriptor close, FIN_WAIT timeout, and when the socket has unread data.
Patch 3 updates the fastclose self tests.
Patch 4 does not change any code, just fixes some outdated comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP data path is quite complex and hard to understend even
without some foggy comments referring to modified code and/or
completely misleading from the beginning.
Update a few of them to more accurately describing the current
status.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patches, the MPTCP protocol can generate
fast-closes on both ends of the connection. Rework the relevant
test-case to carefully trigger the fast-close code-path on a
single end at the time, while ensuring than a predictable amount
of data is spooled on both ends.
Additionally add another test-cases for the passive socket
fast-close.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daire reported a user-space application hang-up when the
peer is forcibly closed before the data transfer completion.
The relevant application expects the peer to either
do an application-level clean shutdown or a transport-level
connection reset.
We can accommodate a such user by extending the fastclose
usage: at fd close time, if the msk socket has some unread
data, and at FIN_WAIT timeout.
Note that at MPTCP close time we must ensure that the TCP
subflows will reset: set the linger socket option to a suitable
value.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an mptcp socket is closed due to an incoming FASTCLOSE
option, so specific sk_err is set and later syscall will
fail usually with EPIPE.
Align the current fastclose error handling with TCP reset,
properly setting the socket error according to the current
msk state and propagating such error.
Additionally sendmsg() is currently not handling properly
the sk_err, always returning EPIPE.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Behún says:
====================
RollBall / Hilink / Turris 10G copper SFP support
I am resurrecting my attempt to add support for RollBall / Hilink /
Turris 10G copper SFPs modules.
The modules contain Marvell 88X3310 PHY, which can communicate with
the system via sgmii, 2500base-x, 5gbase-r, 10gbase-r or usxgmii mode.
Some of the patches I've taken from Russell King's net-queue [1]
(with some rebasing).
The important change from my previous attempts are:
- I am including the changes needed to phylink and marvell10g driver,
so that the 88X3310 PHY is configured to use PHY modes supported by
the host (the PHY defaults to use 10gbase-r only on host's side)
- I have changed the patch that informs phylib about the interfaces
supported by the host (patch 5 of this series): it now fills in the
phydev->host_interfaces member only when connecting a PHY that is
inside a SFP module. This may change in the future.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for multigig copper SFP modules from RollBall/Hilink.
These modules have a specific way to access clause 45 registers of the
internal PHY.
We also need to wait at least 22 seconds after deasserting TX disable
before accessing the PHY. The code waits for 25 seconds just to be sure.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some multigig SFPs from RollBall and Hilink do not expose functional
MDIO access to the internal PHY of the SFP via I2C address 0x56
(although there seems to be read-only clause 22 access on this address).
Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced
Digital Diagnostic Interface - I2C address 0x51. The SFP_PAGE has to be
selected to 3 and the password must be filled with 0xff bytes for this
PHY communication to work.
This extends the mdio-i2c driver to support this protocol by adding a
special parameter to mdio_i2c_alloc function via which this RollBall
protocol can be selected.
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of configuring the I2C mdiobus when SFP driver is probed,
create/destroy the mdiobus before the PHY is probed for/after it is
released.
This way we can tell the mdio-i2c code which protocol to use for each
SFP transceiver.
Move the code that determines MDIO I2C protocol from
sfp_sm_probe_for_phy() to sfp_sm_mod_probe(), where most of the SFP ID
parsing is done. Don't allocate I2C bus if no PHY is expected.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add macros SFP_QUIRK(), SFP_QUIRK_M() and SFP_QUIRK_F() for defining SFP
quirk table entries. Use them to deduplicate the code a little bit.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some SFPs may contain an internal PHY which may in some cases want to
connect with the host interface in 1000base-x/2500base-x mode.
Do not fail if such PHY is being attached in one of these PHY interface
modes.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
