New device suport
* ad7606
- Support the AD7616 16 channel, 12bit ADC.
* fxas21002c
- New driver for this gyroscope with I2C and SPI support.
* lsm6dsx
- Support the lsm6dsr, new device information structure and dt bindings.
* srf04
- Addition device IDs for mb1000, mb1010, mb1020, mb1030 and mb1040 +
support of different required trigger pulse lengths.
* st-accel
- Support the ls2de12, new device info and dt bindings.
* ti-ads8344
- New driver for this 8 channel, 16 bit SPI ADC.
Binding conversions to yaml - we have started doing these in general for IIO.
* avia-hx711
* bmp085
Cleanups and minor fixes / additions
* ad5758
- Fixup for some changes between preproduction parts and final part.
* ad7606
- Refactor handling of oversampling to make it easy to vary between
supported devices.
* ad9832
- Organise includes.
- Clock framework to handle clocks.
* ad9834
- Drop unnecessary parenthesis.
* bmc150
- Use __func__ rather than hardcoding.
* dummy_evgen.
- Fix a memleak on error in probe.
* kxcjk1013
- Add KXCJ91008 ACPI ID as seen in the wild.
- Use __func__ rather than hardcoding.
* imx7d
- Local dev variable to simplify code a bit.
- dev_err replaces pr_err to give more info.
- devm_platform_ioremap_resource for small reduction in boilerplate.
- Simplify probe and remove by sharing suspend / resume logic.
- Devm for iio_device_register as remove only contains the unregister.
* lsm6dsx
- Remove a variable that was never read.
- Open code values where they are effectively described by what is assigned
to them rather than using uninformative defines.
* max31856
- Avoid an unintialized ret variable in a path that can't actually occur
but is hard for a static checker to know.
* max9611
- White space
* mpu3050
- Reduce a sleep worst case by switching from msleep to usleep_range.
* qcom-spmi-adc5
- Add MODULE_DEVICE_TABLE to assist autoloading of this as a module.
* stm32-dfsdm
- Fix missing dependencies.
* stm32-timer trigger
- Fix a build issue when disabled.
* ti-ads7950
- Fix mising dependency on CONFIG_GPIOLIB.
-----BEGIN PGP SIGNATURE-----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=McKo
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new device support, features and cleanup for the 5.2 cycle.
New device suport
* ad7606
- Support the AD7616 16 channel, 12bit ADC.
* fxas21002c
- New driver for this gyroscope with I2C and SPI support.
* lsm6dsx
- Support the lsm6dsr, new device information structure and dt bindings.
* srf04
- Addition device IDs for mb1000, mb1010, mb1020, mb1030 and mb1040 +
support of different required trigger pulse lengths.
* st-accel
- Support the ls2de12, new device info and dt bindings.
* ti-ads8344
- New driver for this 8 channel, 16 bit SPI ADC.
Binding conversions to yaml - we have started doing these in general for IIO.
* avia-hx711
* bmp085
Cleanups and minor fixes / additions
* ad5758
- Fixup for some changes between preproduction parts and final part.
* ad7606
- Refactor handling of oversampling to make it easy to vary between
supported devices.
* ad9832
- Organise includes.
- Clock framework to handle clocks.
* ad9834
- Drop unnecessary parenthesis.
* bmc150
- Use __func__ rather than hardcoding.
* dummy_evgen.
- Fix a memleak on error in probe.
* kxcjk1013
- Add KXCJ91008 ACPI ID as seen in the wild.
- Use __func__ rather than hardcoding.
* imx7d
- Local dev variable to simplify code a bit.
- dev_err replaces pr_err to give more info.
- devm_platform_ioremap_resource for small reduction in boilerplate.
- Simplify probe and remove by sharing suspend / resume logic.
- Devm for iio_device_register as remove only contains the unregister.
* lsm6dsx
- Remove a variable that was never read.
- Open code values where they are effectively described by what is assigned
to them rather than using uninformative defines.
* max31856
- Avoid an unintialized ret variable in a path that can't actually occur
but is hard for a static checker to know.
* max9611
- White space
* mpu3050
- Reduce a sleep worst case by switching from msleep to usleep_range.
* qcom-spmi-adc5
- Add MODULE_DEVICE_TABLE to assist autoloading of this as a module.
* stm32-dfsdm
- Fix missing dependencies.
* stm32-timer trigger
- Fix a build issue when disabled.
* ti-ads7950
- Fix mising dependency on CONFIG_GPIOLIB.
* tag 'iio-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits)
iio: adc: qcom-spmi-adc5: Fix of-based module autoloading
iio: dummy_evgen: fix possible memleak in evgen init
iio:accel:Switch hardcoded function name with a reference to __func__ making the code more maintainable
iio: adc: stm32-dfsdm: fix triggered buffer build dependency
iio: adc: stm32-dfsdm: fix unmet direct dependencies detected
iio: trigger: stm32-timer: fix build issue when disabled
iio: imx7d_adc: Use devm_iio_device_register()
iio: imx7d_adc: Simplify imx7d_adc_remove() with imx7d_adc_suspend()
iio: imx7d_adc: Simplify imx7d_adc_probe() with imx7d_adc_resume()
drivers/iio/gyro/mpu3050-core.c: This patch fix the following checkpatch warning.
iio: dac: ad5758: Modifications for new revision
iio: imu: st_lsm6dsx: inline per-sensor data
iio: adc: Add driver for the TI ADS8344 A/DC chips
dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips
MAINTAINERS: add entry for fxas21002c gyro driver
iio: gyro: fxas21002c: add spi driver
iio: gyro: fxas21002c: add i2c driver
iio: gyro: add core driver for fxas21002c
iio: gyro: add DT bindings to fxas21002c
Kconfig: change configuration of srf04 ultrasonic iio sensor
...
Previously external clock were set through platform_data struct.
Now device uses clk struct defined in include/linux/clk.h to handle
external clock source.
It also removes mclk from platform_data struct.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Organize includes to list them in lexicographic order.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unneeded parentheses around the arguments of ||. This reduces
clutter and code behave in the same way. Change suggested by
checkpatch.pl.
CHECK: Unnecessary parentheses around 'st->devid == ID_AD9833'
CHECK: Unnecessary parentheses around 'st->devid == ID_AD9837'
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Staging graduations
* ad7780
- Move this ADC driver out of staging. Included adding some new features
along the way (see below). Also added DT bindings.
New device support
* adis16480
- Support the ADIS16495 and ADIS16497 IMU devices making
heavy use of refactoring of various aspects of the driver in precursor
patches.
* lsm6dsx
- Support for the ASM330LHH 6-axis (accelerometer + gyro) sensor.
- Support for the LSM6DS0X
* matbotix mb1232
- New driver for this ultrasound ranging device family. Including bindings.
- Supports mb1202, mb1212, mb1222, mb1232, mb1242, mb7040 and mb7137.
* max31856
- New driver for this thermocouple temperature sensor.
* meson saradc
- Support the Meson-G12A (ID addition only).
* stmpe-adc
- New driver supporting generic ADC alongside touchscreen support which
previously existed. Includes DT bindings.
* vcnl4000
- Support for the vcln4040 proximity and light sensor, including adding
DT bindings for this and parts previously supported.
Features
* core
- Allow reading of mount matrices from ACPI in addition to DT.
- Common binding for theromcouple types.
* ad5933
- Add ABI docs as there are a few 'unsual' elements about this
device - perhaps because it's our only impedance analyser.
* ad7780
- Add gain and filter gpio support + readback of current gain and filter.
* adis16480
- Allow selection fo the dataready pin to be used.
- Device tree ID table and binding documentation.
- Support external clock modes, including new bindings.
* bma180
- Mount matrix support.
* bmc150
- Mount matrix support.
* bmg160
- Mount matrix support.
- DT id table and bindings doc.
* bmp280
- Put calibration data into the entropy pool.
* hmc5843
- Mount matrix support.
* itg3200
- Mount matrix support.
* kxcjk1013
- Device tree id table, and binding docs.
* lpc32xx
- Add scale when regulator specified including DT docs for regulator.
* pms7003
- Add device IDs for all supported parts to driver and binding.
* stm32-dfsdm
- Enable hw consumer support, scan mode control and a complex set of
triggered buffer modes.
- Power management.
* stm32-lptimer-counter
- power management.
- Document the pinctrl sleep state binding.
* ti-ads7950
- GPIO pin support.
Cleanups, minor fixes
* core
- Use bitmap_zalloc to make it explicit that is what we are doing.
- Tidy up all the Kconfig files (which had slowly gotten messy)
- Fix a forwards definition missing issue in iio/driver.h
* ad sigma delta core
- Improve handling of SPI bus locking vs CS assertion. This has been
wrong a long time so not rushing this in.
* ad5064
- Mlock to local lock.
* ad5933 (staging cleanup)
- Multiline comment fixes.
- Include ordering.
- SPDX.
- Tidy up Kconfig help which was a bit missleading.
- Change some non standard attributes to ABI defined ones.
* ad7124
- White space fix.
* ad7192
- White space.
- Use DT clock binding.
- Improve error reporting.
- Platform data to DT conversion.
- Use read_avail callback, mostly to avoid the endless series of
patches from new contributors trying to falsely put spaces around
the negative sign.
* ad7280a
- Add brackets to macros to avoid potential precedence isseus.
- Add temp vars for event codes to reduce indent and improved readability.
- Clean out som CamelCase notation.
- White space.
* ad7606
- Fix broken file naming in MAINTAINERS.
* ad7780
- Missing switch defaults to supress warnings and harden the code slightly.
- Set pattern masks more directly.
- Add ID values and masks for all supported chips.
- SPDX + add Renato as a copyright holder as he has done a lot of work on
this driver.
- Add brackets to macros to avoid potential precedence issues.
* ad7923
- White space fixes.
- Use BIT macro to improve readability.
- Add brackets to macros to avoid potential precedence issues.
- Tidy up a null comparisom.
* ad9523
- Fix a typo in naming of variables.
* adis16400
- Combine trigger file into main code as no advantage in separate files.
Rename core file to just adis16400.
- Squash the header into the c file now there is only one file.
- Generalize burst mode to support new variants.
* ak8975
- Local variable to improve readability around mount matrix support.
* as3935
- Avoid potential race by ensuring remove does exact opposite of
probe rather than a slightly different order.
* cross_ec
- Drop some unnecessary includes.
- Fix some warning and the slightly 'unusual' code.
- Add some docs for non obvious function.
- SPDX
* hmc5843
- Potential unhandled error case.
* iio trigger core
- Print an error if there is no available irq due to max consumers per
trigger being set to low.
* iio loop trigger
- Drop an unlikely on IS_ERR as IS_ERR already has the annotation.
* ingenic-adc
- Drop a redundant dev_err call as devm_ioremap_resource reports the same
internally.
* lmp91000
- Drop some unncessary parentheses and white space tidy up.
- Invert and if statement to improve readability.
- Fix a wrong error message.
* lpc32xx
- Header sorting + drop some unused ones.
* mma8542
- Mark a switch fallthrough.
* mpu6050
- Add a local variable to improve code readability around mount matrix
support.
* mxs-lradc-adc
- Handle devm_iio_trigger_alloc failure.
* sps30
- Fix up a kernel version in the ABI docs.
* srf04
- DT binding doc converted to yaml.
* ssp_sensors
- Supress a clang build warning due to lack of visibility of conditional
within a iio_push_to_buffers_with_timestamp. (reasonable false warning!)
* st_accel
- Drop pointless less than 0 comparisom of unsigned int.
* stm32-dfsdm
- Improve accuracy of spi_master_frequency calculation.
- Improve calculation fo sampling frequency.
- Rework various internals to simplify adding triggered buffer support.
- Claim direct mode to avoid racing around read_raw and being in buffered
mode.
* stmpe
- Fix a clang false positive warning.
* ti-ads7950
- Use local lock rather than using the core mlock when not locking around
the device mode.
* vcnl4000
- Use word writes instead of byte writes. It seems byte writes are fine
for some parts (undocument) but not others that the driver will shortly
support.
Other
* mailmap
- Add email address change for Sean Nyekjaer. Update in relevant drivers
-----BEGIN PGP SIGNATURE-----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=GnjE
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.2a-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and fixes for IIO in the 5.2 cycle
Staging graduations
* ad7780
- Move this ADC driver out of staging. Included adding some new features
along the way (see below). Also added DT bindings.
New device support
* adis16480
- Support the ADIS16495 and ADIS16497 IMU devices making
heavy use of refactoring of various aspects of the driver in precursor
patches.
* lsm6dsx
- Support for the ASM330LHH 6-axis (accelerometer + gyro) sensor.
- Support for the LSM6DS0X
* matbotix mb1232
- New driver for this ultrasound ranging device family. Including bindings.
- Supports mb1202, mb1212, mb1222, mb1232, mb1242, mb7040 and mb7137.
* max31856
- New driver for this thermocouple temperature sensor.
* meson saradc
- Support the Meson-G12A (ID addition only).
* stmpe-adc
- New driver supporting generic ADC alongside touchscreen support which
previously existed. Includes DT bindings.
* vcnl4000
- Support for the vcln4040 proximity and light sensor, including adding
DT bindings for this and parts previously supported.
Features
* core
- Allow reading of mount matrices from ACPI in addition to DT.
- Common binding for theromcouple types.
* ad5933
- Add ABI docs as there are a few 'unsual' elements about this
device - perhaps because it's our only impedance analyser.
* ad7780
- Add gain and filter gpio support + readback of current gain and filter.
* adis16480
- Allow selection fo the dataready pin to be used.
- Device tree ID table and binding documentation.
- Support external clock modes, including new bindings.
* bma180
- Mount matrix support.
* bmc150
- Mount matrix support.
* bmg160
- Mount matrix support.
- DT id table and bindings doc.
* bmp280
- Put calibration data into the entropy pool.
* hmc5843
- Mount matrix support.
* itg3200
- Mount matrix support.
* kxcjk1013
- Device tree id table, and binding docs.
* lpc32xx
- Add scale when regulator specified including DT docs for regulator.
* pms7003
- Add device IDs for all supported parts to driver and binding.
* stm32-dfsdm
- Enable hw consumer support, scan mode control and a complex set of
triggered buffer modes.
- Power management.
* stm32-lptimer-counter
- power management.
- Document the pinctrl sleep state binding.
* ti-ads7950
- GPIO pin support.
Cleanups, minor fixes
* core
- Use bitmap_zalloc to make it explicit that is what we are doing.
- Tidy up all the Kconfig files (which had slowly gotten messy)
- Fix a forwards definition missing issue in iio/driver.h
* ad sigma delta core
- Improve handling of SPI bus locking vs CS assertion. This has been
wrong a long time so not rushing this in.
* ad5064
- Mlock to local lock.
* ad5933 (staging cleanup)
- Multiline comment fixes.
- Include ordering.
- SPDX.
- Tidy up Kconfig help which was a bit missleading.
- Change some non standard attributes to ABI defined ones.
* ad7124
- White space fix.
* ad7192
- White space.
- Use DT clock binding.
- Improve error reporting.
- Platform data to DT conversion.
- Use read_avail callback, mostly to avoid the endless series of
patches from new contributors trying to falsely put spaces around
the negative sign.
* ad7280a
- Add brackets to macros to avoid potential precedence isseus.
- Add temp vars for event codes to reduce indent and improved readability.
- Clean out som CamelCase notation.
- White space.
* ad7606
- Fix broken file naming in MAINTAINERS.
* ad7780
- Missing switch defaults to supress warnings and harden the code slightly.
- Set pattern masks more directly.
- Add ID values and masks for all supported chips.
- SPDX + add Renato as a copyright holder as he has done a lot of work on
this driver.
- Add brackets to macros to avoid potential precedence issues.
* ad7923
- White space fixes.
- Use BIT macro to improve readability.
- Add brackets to macros to avoid potential precedence issues.
- Tidy up a null comparisom.
* ad9523
- Fix a typo in naming of variables.
* adis16400
- Combine trigger file into main code as no advantage in separate files.
Rename core file to just adis16400.
- Squash the header into the c file now there is only one file.
- Generalize burst mode to support new variants.
* ak8975
- Local variable to improve readability around mount matrix support.
* as3935
- Avoid potential race by ensuring remove does exact opposite of
probe rather than a slightly different order.
* cross_ec
- Drop some unnecessary includes.
- Fix some warning and the slightly 'unusual' code.
- Add some docs for non obvious function.
- SPDX
* hmc5843
- Potential unhandled error case.
* iio trigger core
- Print an error if there is no available irq due to max consumers per
trigger being set to low.
* iio loop trigger
- Drop an unlikely on IS_ERR as IS_ERR already has the annotation.
* ingenic-adc
- Drop a redundant dev_err call as devm_ioremap_resource reports the same
internally.
* lmp91000
- Drop some unncessary parentheses and white space tidy up.
- Invert and if statement to improve readability.
- Fix a wrong error message.
* lpc32xx
- Header sorting + drop some unused ones.
* mma8542
- Mark a switch fallthrough.
* mpu6050
- Add a local variable to improve code readability around mount matrix
support.
* mxs-lradc-adc
- Handle devm_iio_trigger_alloc failure.
* sps30
- Fix up a kernel version in the ABI docs.
* srf04
- DT binding doc converted to yaml.
* ssp_sensors
- Supress a clang build warning due to lack of visibility of conditional
within a iio_push_to_buffers_with_timestamp. (reasonable false warning!)
* st_accel
- Drop pointless less than 0 comparisom of unsigned int.
* stm32-dfsdm
- Improve accuracy of spi_master_frequency calculation.
- Improve calculation fo sampling frequency.
- Rework various internals to simplify adding triggered buffer support.
- Claim direct mode to avoid racing around read_raw and being in buffered
mode.
* stmpe
- Fix a clang false positive warning.
* ti-ads7950
- Use local lock rather than using the core mlock when not locking around
the device mode.
* vcnl4000
- Use word writes instead of byte writes. It seems byte writes are fine
for some parts (undocument) but not others that the driver will shortly
support.
Other
* mailmap
- Add email address change for Sean Nyekjaer. Update in relevant drivers
* tag 'iio-for-5.2a-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (129 commits)
iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
iio: adc: stm32-dfsdm: add PM support
iio: adc: stm32-dfsdm: improve sampling frequency accuracy
staging: iio: adc: ad7280a: Tab alignment
MAINTAINERS: Fix the link to ad7606 dt-bindings
iio:temperature: Add MAX31856 thermocouple support
iio:temperature:max31856:Add device tree bind info
dt-bindings: iio/temperature: Add thermocouple types (and doc)
devantech-srf04.yaml: transform DT binding to YAML
iio: frequency: ad9523: Fix typo in ad9523_platform_data
iio: Make possible to include driver.h first
dt-bindings: iio: add Bosch BMG160 gyroscope sensor
iio: gyro: bmg160: add device tree compatibility table
staging: iio: adc: ad7192: Use read_avail for available attributes
dt-bindings: iio: light: add vcnl4040 devicetree bindings
iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
dt-bindings: iio: light: add vcnl4000 devicetree bindings
iio: light: vcnl4000 add devicetree hooks
iio: light: vcnl4000 use word writes instead of byte writes
iio: adc: stm32-dfsdm: claim direct mode for raw read and settings
...
This patch removes the in_voltage-voltage_scale_available and
in_voltage_scale_available attributes. These are replaced with available
attributes added in info_mask_shared_by_type_available.
With this modification the iio core will be responsible with naming the
attributes thus removing the checkpatch warning related to
in_voltage-voltage_scale_available naming.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change device attributes' names to match ABI documentation. Names were
chosen such that they tend to be similar to existing ABI so it should
be easier to standardize them when necessary.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Creating a temporary variable to improve readability
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Enclosing parameter with parenthesis due to avoid
possible precedence issue.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add an ABI documentation for the ad5933 driver.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove the previous comment about direct access via sysfs which would
lead one think ad5933 driver has limitations it actually doesn't.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add SPDX identifier of GPL-2.0 for the ad5933 driver.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Organize includes to list them in lexicographic order.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make multi-line comments compliant with the preferred code style.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move ad7780 ADC driver out of staging and into the mainline.
The ad7780 is a sigma-delta analog to digital converter. This driver provides
reading voltage values and status bits from both the ad778x and ad717x series.
Its interface also allows writing on the FILTER and GAIN GPIO pins on the
ad778x.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Giuliano Belinassi <giuliano.belinassi@usp.br>
Co-developed-by: Giuliano Belinassi <giuliano.belinassi@usp.br>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch adds a new copyright holder to the ad7780 driver.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add SPDX identifier (GPL-2.0) to the AD7780 driver.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To maintain consistency between ad7780_probe and ad7780_remove orders,
regulator initialization has been moved to after GPIO initializations.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7780 supports both the ad778x and ad717x families. Each chip has
a corresponding ID. This patch provides a mask for extracting ID values
from the status bits and also macros for the correct values for the
ad7170, ad7171, ad7780 and ad7781.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD7780 driver contains status pattern bits designed for checking
whether serial transfers have been correctly performed. Pattern macros
were previously generated through bit fields. This patch sets good
pattern values directly and masks through GENMASK.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch adds the new feature of reading the filter odr value for
ad778x chips. This value is stored in the chip's state struct whenever a
read or write call is performed on the chip's driver.
This feature requires sharing SAMP_FREQ. Since the ad717x does not have
a filter option, the driver only shares the relevant info mask for the
ad778x family.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch adds a new functionality of reading gain values from the
ad778x chips. This value is stored in the chip's state struct and is
updated whenever a read or write call is performed on the driver.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch simply adds a missing switch default case in read_raw.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Previously, the AD7780 driver only supported gpio for the 'powerdown'
pin. This commit adds suppport for the 'gain' and 'filter' pin.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Giuliano Belinassi <giuliano.belinassi@usp.br>
Co-developed-by: Giuliano Belinassi <giuliano.belinassi@usp.br>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch will remove platform data members and replace them with device
tree properties. These properties will be subject to further modifications
and probably replaced with other functionalities at some point in time.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch removes the goto out statement and uninformative
print message. This improves readability.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch replaces the platform data clock select member with DT clock
binding. Through the DT the external clock binding is specified. If this is
not provided then the device will use the internal clock source.
With the external clock binding there is the option to use a clock or a
crystal as the clock source. When an external crystal is used it is
connected to MCLK1 and MCLK2 pins. If the external clock is used only MCLK2
pin will be connected.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch fixes the odd indentation inside function ad7192_calibrate_all.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are a number of IIO staging drivers that do not have a proper SPDX
identifier on it. So fix that up and at the same time, remove the "free
form" license text, as that's pretty much impossible for any tool to
parse.
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few remaining drivers/staging/*/Makefile files that do not
have SPDX identifiers in them. Add the correct GPL-2.0 identifier to
them to make scanning tools happy.
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few remaining drivers/staging/*/Kconfig files that do not
have SPDX identifiers in them. Add the correct GPL-2.0 identifier to
them to make scanning tools happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Challenge suggested by coccinelle.
Prefer using BIT and replace bit shifting with the BIT(x) macro.
Signed-off-by: Payal Kshirsagar <payal.s.kshirsagar.98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Challenge suggested by coccinelle.
Prefer using BIT and replace bit shifting with the BIT(x) macro.
Signed-off-by: Payal Kshirsagar <payal.s.kshirsagar.98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the differential channels addresses for the ad7193.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch fixes an obvious typo, which will cause erroneously returning the Peak
Voltage instead of the Peak Current.
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
Cc: <Stable@vger.kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The clock frequency is loaded from device-tree using clock framework
instead of statically value. The change allow configuration of
the device via device-trees and better initialization sequence.
This is part of broader effort to add device-tree support to this driver
and take it out from staging.
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The values from platform data were replaced by statically values.
This was just a intermediate step of taking this driver out of staging and
load data from device tree.
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD7153 part has been obsoleted for some time. The AD7152 part will be
obsolete in the coming future.
Moving it out of staging doesn't make sense anymore. Which makes the driver
enter a limbo state.
This patch removes the driver completely, so that no effort is placed on
it, allowing people to focus on other parts that will still be around.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The lsb calculation is not masking the correct bits from the user input.
Subtract 1 from (1 << offset) to correctly set up the mask to be applied
to user input.
The lsb register stores its value starting at the bit 7 position.
adt7316_store_DAC() currently assumes the value is at the other end of the
register. Shift the lsb value before storing it in a new variable lsb_reg,
and write this variable to the lsb register.
Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The calculation of the current dac value is using the wrong bits of the
dac lsb register. Create two macros to shift the lsb register value into
lsb position, depending on whether the dac is 10 or 12 bit. Initialize
data to 0 so, with an 8 bit dac, the msb register value can be bitwise
ORed with data.
Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The adt7316/7 and adt7516/7 have the option to output voltage proportional
to temperature on dac a and/or dac b. The default dac resolution in this
mode is 8 bits with the dac high resolution option enabling 10 bits. None
of these settings affect dacs c and d. Remove the "1 (12 bits)" output from
the show function since that is not an option for this mode. Return
"1 (10 bits)" if the device is one of the above mentioned chips and the dac
high resolution mode is enabled.
In the store function, the driver currently allows the user to write to the
ADT7316_DA_HIGH_RESOLUTION bit regardless of the device in use. Add a check
to return an error in the case of an adt7318 or adt7519. Remove the else
statement that clears the ADT7316_DA_HIGH_RESOLUTION bit. Instead, clear it
before conditionally enabling it, depending on user input. This matches the
typical pattern in the driver when an attribute is a boolean.
Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The value of dac_bits is used in adt7316_show_DAC() and adt7316_store_DAC(),
and it should be either 8, 10, or 12 bits depending on the device in use. The
driver currently only assigns a value to dac_bits in
adt7316_store_da_high_resolution(). The purpose of the dac high resolution
option is not to change dac resolution for normal operation. Instead, it
is specific to an optional feature where one or two of the four dacs can
be set to output voltage proportional to temperature. If the user chooses
to set dac a and/or dac b to output voltage proportional to temperature,
the da_high_resolution attribute can optionally be enabled to use 10 bit
resolution rather than the default 8 bits. This is only available on the
10 and 12 bit dac devices. If the user attempts to read or write dacs a
or b under these settings, the driver's current behaviour is to return an
error. Dacs c and d continue to operate normally under these conditions.
With the above in mind, remove the dac_bits assignments from this function
since the value of dac_bits as used in the driver is not dependent on this
dac high resolution option.
Since the dac_bits assignments discussed above are currently the only ones
in this driver, the default value of dac_bits is 0. This results in incorrect
calculations when the dacs are read or written in adt7316_show_DAC() and
adt7316_store_DAC(). To correct this, assign a value to dac_bits in
adt7316_probe() to ensure correct operation as soon as the device is
registered and available to userspace.
Fixes: 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move ad7606 ADC driver out of staging and into the mainline.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* Placed includes in alphabetical order
* Added brackets around num and mask through out for AD760X_CHANNEL
* Used single line comments where needed
* Removed extra lines and spaces
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch replaces the use of a polling ring buffer with a threaded
interrupt.
Enabling the buffer sets the CONVST signal to high. When the rising edge
of the CONVST is applied, BUSY signal goes logic high and transitions low
at the end of the entire conversion process. The falling edge of the BUSY
signal triggers the interrupt.
ad7606_trigger_handler() is used as bottom half of the poll function.
It reads data from the device and stores it in the internal buffer.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch replaces the license text at the top of ad7606 driver files
and instead adds SPDX GPL-2.0 license identifier.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
