Currently, every expression in Kconfig files produces a new abstract
syntax tree (AST), even if it is identical to a previously encountered
one.
Consider the following code:
config FOO
bool "FOO"
depends on (A || B) && C
config BAR
bool "BAR"
depends on (A || B) && C
config BAZ
bool "BAZ"
depends on A || B
The "depends on" lines are similar, but currently a separate AST is
allocated for each one.
The current data structure looks like this:
FOO->dep ==> AND BAR->dep ==> AND BAZ->dep ==> OR
/ \ / \ / \
OR C OR C A B
/ \ / \
A B A B
This is redundant; FOO->dep and BAR->dep have identical ASTs but
different memory instances.
We can optimize this; FOO->dep and BAR->dep can share the same AST, and
BAZ->dep can reference its sub tree.
The optimized data structure looks like this:
FOO->dep, BAR->dep ==> AND
/ \
BAZ->dep ==> OR C
/ \
A B
This commit introduces a hash table to keep track of allocated
expressions. If an identical expression is found, it is reused.
This does not necessarily result in memory savings, as menu_finalize()
transforms expressions without freeing up stale ones. This will be
addressed later.
One optimization that can be easily implemented is caching the
expression's value. Once FOO's dependency, (A || B) && C, is calculated,
it can be cached, eliminating the need to recalculate it for BAR.
This commit also reverts commit e983b7b17a ("kconfig/menu.c: fix
multiple references to expressions in menu_add_prop()").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, expr_eliminate_dups() passes two identical pointers down to
expr_eliminate_dups1(), which later skips processing identical leaves.
This approach is somewhat tricky and, more importantly, it will not work
with the refactoring made in the next commit.
This commit slightly changes the recursion logic; it deduplicates both
the left and right arms, and then passes them to expr_eliminate_dups1().
expr_eliminate_dups() should produce the same result.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This function was originally added by commit 8af27e1dc4 ("fixdep: use
hash table instead of a single array").
Move it to scripts/include/ so that other host programs can use it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
After commit 64e166099b ("kallsyms: get rid of code for absolute,
kallsyms"), there is only one call site for output_address(). Squash it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_BUILTIN_MODULE_RANGES is enabled, the modules.builtin.ranges
file should be installed in the module install location.
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The modules.builtin.ranges offset range data for builtin modules is
generated at compile time based on the list of built-in modules and
the vmlinux.map and vmlinux.o.map linker maps. This data can be used
to determine whether a symbol at a particular address belongs to
module code that was configured to be compiled into the kernel proper
as a built-in module (rather than as a standalone module).
This patch adds a script that uses the generated modules.builtin.ranges
data to annotate the symbols in the System.map with module names if
their address falls within a range that belongs to one or more built-in
modules.
It then processes the vmlinux.map (and if needed, vmlinux.o.map) to
verify the annotation:
- For each top-level section:
- For each object in the section:
- Determine whether the object is part of a built-in module
(using modules.builtin and the .*.cmd file used to compile
the object as suggested in [0])
- For each symbol in that object, verify that the built-in
module association (or lack thereof) matches the annotation
given to the symbol.
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Create file module.builtin.ranges that can be used to find where
built-in modules are located by their addresses. This will be useful for
tracing tools to find what functions are for various built-in modules.
The offset range data for builtin modules is generated using:
- modules.builtin: associates object files with module names
- vmlinux.map: provides load order of sections and offset of first member
per section
- vmlinux.o.map: provides offset of object file content per section
- .*.cmd: build cmd file with KBUILD_MODFILE
The generated data will look like:
.text 00000000-00000000 = _text
.text 0000baf0-0000cb10 amd_uncore
.text 0009bd10-0009c8e0 iosf_mbi
...
.text 00b9f080-00ba011a intel_skl_int3472_discrete
.text 00ba0120-00ba03c0 intel_skl_int3472_discrete intel_skl_int3472_tps68470
.text 00ba03c0-00ba08d6 intel_skl_int3472_tps68470
...
.data 00000000-00000000 = _sdata
.data 0000f020-0000f680 amd_uncore
For each ELF section, it lists the offset of the first symbol. This can
be used to determine the base address of the section at runtime.
Next, it lists (in strict ascending order) offset ranges in that section
that cover the symbols of one or more builtin modules. Multiple ranges
can apply to a single module, and ranges can be shared between modules.
The CONFIG_BUILTIN_MODULE_RANGES option controls whether offset range data
is generated for kernel modules that are built into the kernel image.
How it works:
1. The modules.builtin file is parsed to obtain a list of built-in
module names and their associated object names (the .ko file that
the module would be in if it were a loadable module, hereafter
referred to as <kmodfile>). This object name can be used to
identify objects in the kernel compile because any C or assembler
code that ends up into a built-in module will have the option
-DKBUILD_MODFILE=<kmodfile> present in its build command, and those
can be found in the .<obj>.cmd file in the kernel build tree.
If an object is part of multiple modules, they will all be listed
in the KBUILD_MODFILE option argument.
This allows us to conclusively determine whether an object in the
kernel build belong to any modules, and which.
2. The vmlinux.map is parsed next to determine the base address of each
top level section so that all addresses into the section can be
turned into offsets. This makes it possible to handle sections
getting loaded at different addresses at system boot.
We also determine an 'anchor' symbol at the beginning of each
section to make it possible to calculate the true base address of
a section at runtime (i.e. symbol address - symbol offset).
We collect start addresses of sections that are included in the top
level section. This is used when vmlinux is linked using vmlinux.o,
because in that case, we need to look at the vmlinux.o linker map to
know what object a symbol is found in.
And finally, we process each symbol that is listed in vmlinux.map
(or vmlinux.o.map) based on the following structure:
vmlinux linked from vmlinux.a:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
vmlinux linked from vmlinux.o:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
vmlinux.o -- need to use vmlinux.o.map
<symbol> -- ignored
...
vmlinux.o.map:
<section>
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
3. As sections, objects, and symbols are processed, offset ranges are
constructed in a straight-forward way:
- If the symbol belongs to one or more built-in modules:
- If we were working on the same module(s), extend the range
to include this object
- If we were working on another module(s), close that range,
and start the new one
- If the symbol does not belong to any built-in modules:
- If we were working on a module(s) range, close that range
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc, isil,isl69260,
ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled
-----BEGIN PGP SIGNATURE-----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=a3qP
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
- The beginning of an EEVDF scheduler document
- More Chinese translations
- A rethrashing of our bisection documentation
...plus the usual array of smaller fixes, and more than the usual number of
typo fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmboMnkACgkQF0NaE2wM
flha/Qf/e8zRinIYQJ7BmombNm39w3wUiNuXr8SWq7afqhsAJJzmOZ3oyyfssL+B
a1pSjhxb15UrKf1kMKhdBxhDndXvto5UekJRBY5gsTvcBMBmtIovN+ZK5Z5jObsw
gzHD9of08Ti7N4C2dSBdLPHtvIBX0rVeEK4oAH7AUaQviu1cfTaLQQA0dRYsaJeX
iXsts2NkGl6ZUF7mk4nlzj8+Y1zot+mCd6B53iSimNKxwsPODrCZUobJAvxg1qVU
pRCQcnpx2fTBnh4ugrcLZbautyhL9bJ8VQzFeoQgYpODDgDnZyTjN6kxv65LpxAz
dXi+hx5Vk7lP3BbTp9EeGn305/qQPA==
=JuBw
-----END PGP SIGNATURE-----
Merge tag 'docs-6.12' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"Another relatively mundane cycle for docs:
- The beginning of an EEVDF scheduler document
- More Chinese translations
- A rethrashing of our bisection documentation
...plus the usual array of smaller fixes, and more than the usual
number of typo fixes"
* tag 'docs-6.12' of git://git.lwn.net/linux: (48 commits)
Remove duplicate "and" in 'Linux NVMe docs.
docs:filesystems: fix spelling and grammar mistakes
docs:filesystem: fix mispelled words on autofs page
docs:mm: fixed spelling and grammar mistakes on vmalloc kernel stack page
Documentation: PCI: fix typo in pci.rst
docs/zh_CN: add the translation of kbuild/gcc-plugins.rst
docs/process: fix typos
docs:mm: fix spelling mistakes in heterogeneous memory management page
accel/qaic: Fix a typo
docs/zh_CN: update the translation of security-bugs
docs: block: Fix grammar and spelling mistakes in bfq-iosched.rst
Documentation: Fix spelling mistakes
Documentation/gpu: Fix typo in Documentation/gpu/komeda-kms.rst
scripts: sphinx-pre-install: remove unnecessary double check for $cur_version
Loongarch: KVM: Add KVM hypercalls documentation for LoongArch
Documentation: Document the kernel flag bdev_allow_write_mounted
docs: scheduler: completion: Update member of struct completion
docs: kerneldoc-preamble.sty: Suppress extra spaces in CJK literal blocks
docs: submitting-patches: Advertise b4
docs: update dev-tools/kcsan.rst url about KTSAN
...
-----BEGIN PGP SIGNATURE-----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=HIAO
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Move the LSM framework to static calls
This transitions the vast majority of the LSM callbacks into static
calls. Those callbacks which haven't been converted were left as-is
due to the general ugliness of the changes required to support the
static call conversion; we can revisit those callbacks at a future
date.
- Add the Integrity Policy Enforcement (IPE) LSM
This adds a new LSM, Integrity Policy Enforcement (IPE). There is
plenty of documentation about IPE in this patches, so I'll refrain
from going into too much detail here, but the basic motivation behind
IPE is to provide a mechanism such that administrators can restrict
execution to only those binaries which come from integrity protected
storage, e.g. a dm-verity protected filesystem. You will notice that
IPE requires additional LSM hooks in the initramfs, dm-verity, and
fs-verity code, with the associated patches carrying ACK/review tags
from the associated maintainers. We couldn't find an obvious
maintainer for the initramfs code, but the IPE patchset has been
widely posted over several years.
Both Deven Bowers and Fan Wu have contributed to IPE's development
over the past several years, with Fan Wu agreeing to serve as the IPE
maintainer moving forward. Once IPE is accepted into your tree, I'll
start working with Fan to ensure he has the necessary accounts, keys,
etc. so that he can start submitting IPE pull requests to you
directly during the next merge window.
- Move the lifecycle management of the LSM blobs to the LSM framework
Management of the LSM blobs (the LSM state buffers attached to
various kernel structs, typically via a void pointer named "security"
or similar) has been mixed, some blobs were allocated/managed by
individual LSMs, others were managed by the LSM framework itself.
Starting with this pull we move management of all the LSM blobs,
minus the XFRM blob, into the framework itself, improving consistency
across LSMs, and reducing the amount of duplicated code across LSMs.
Due to some additional work required to migrate the XFRM blob, it has
been left as a todo item for a later date; from a practical
standpoint this omission should have little impact as only SELinux
provides a XFRM LSM implementation.
- Fix problems with the LSM's handling of F_SETOWN
The LSM hook for the fcntl(F_SETOWN) operation had a couple of
problems: it was racy with itself, and it was disconnected from the
associated DAC related logic in such a way that the LSM state could
be updated in cases where the DAC state would not. We fix both of
these problems by moving the security_file_set_fowner() hook into the
same section of code where the DAC attributes are updated. Not only
does this resolve the DAC/LSM synchronization issue, but as that code
block is protected by a lock, it also resolve the race condition.
- Fix potential problems with the security_inode_free() LSM hook
Due to use of RCU to protect inodes and the placement of the LSM hook
associated with freeing the inode, there is a bit of a challenge when
it comes to managing any LSM state associated with an inode. The VFS
folks are not open to relocating the LSM hook so we have to get
creative when it comes to releasing an inode's LSM state.
Traditionally we have used a single LSM callback within the hook that
is triggered when the inode is "marked for death", but not actually
released due to RCU.
Unfortunately, this causes problems for LSMs which want to take an
action when the inode's associated LSM state is actually released; so
we add an additional LSM callback, inode_free_security_rcu(), that is
called when the inode's LSM state is released in the RCU free
callback.
- Refactor two LSM hooks to better fit the LSM return value patterns
The vast majority of the LSM hooks follow the "return 0 on success,
negative values on failure" pattern, however, there are a small
handful that have unique return value behaviors which has caused
confusion in the past and makes it difficult for the BPF verifier to
properly vet BPF LSM programs. This includes patches to
convert two of these"special" LSM hooks to the common 0/-ERRNO pattern.
- Various cleanups and improvements
A handful of patches to remove redundant code, better leverage the
IS_ERR_OR_NULL() helper, add missing "static" markings, and do some
minor style fixups.
* tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (40 commits)
security: Update file_set_fowner documentation
fs: Fix file_set_fowner LSM hook inconsistencies
lsm: Use IS_ERR_OR_NULL() helper function
lsm: remove LSM_COUNT and LSM_CONFIG_COUNT
ipe: Remove duplicated include in ipe.c
lsm: replace indirect LSM hook calls with static calls
lsm: count the LSMs enabled at compile time
kernel: Add helper macros for loop unrolling
init/main.c: Initialize early LSMs after arch code, static keys and calls.
MAINTAINERS: add IPE entry with Fan Wu as maintainer
documentation: add IPE documentation
ipe: kunit test for parser
scripts: add boot policy generation program
ipe: enable support for fs-verity as a trust provider
fsverity: expose verified fsverity built-in signatures to LSMs
lsm: add security_inode_setintegrity() hook
ipe: add support for dm-verity as a trust provider
dm-verity: expose root hash digest and signature data to LSMs
block,lsm: add LSM blob and new LSM hooks for block devices
ipe: add permissive toggle
...
Rust supports KASAN via LLVM, but prior to this patch, the flags aren't
set properly.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20240820194910.187826-4-mmaurer@google.com
[ Applied "SW_TAGS KASAN" nit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Creates flag probe macro variants for `rustc`. These are helpful
because:
1. The kernel now supports a minimum `rustc` version rather than a
single version.
2. `rustc` links against a range of LLVM revisions, occasionally even
ones without an official release number. Since the availability of
some Rust flags depends on which LLVM it has been linked against,
probing is necessary.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Link: https://github.com/Rust-for-Linux/linux/pull/1087
Link: https://lore.kernel.org/r/20240820194910.187826-2-mmaurer@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When KASAN support was being added to the Linux kernel, GCC did not yet
support all of the KASAN-related compiler options. Thus, the KASAN
Makefile had to probe the compiler for supported options.
Nowadays, the Linux kernel GCC version requirement is 5.1+, and thus we
don't need the probing of the -fasan-shadow-offset parameter: it exists in
all 5.1+ GCCs.
Simplify the KASAN Makefile to drop CFLAGS_KASAN_MINIMAL.
Also add a few more comments and unify the indentation.
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20240814161052.10374-1-andrey.konovalov@linux.dev
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Make it possible to use the Control Flow Integrity (CFI) sanitizer when
Rust is enabled. Enabling CFI with Rust requires that CFI is configured
to normalize integer types so that all integer types of the same size
and signedness are compatible under CFI.
Rust and C use the same LLVM backend for code generation, so Rust KCFI
is compatible with the KCFI used in the kernel for C. In the case of
FineIBT, CFI also depends on -Zpatchable-function-entry for rewriting
the function prologue, so we set that flag for Rust as well. The flag
for FineIBT requires rustc 1.80.0 or later, so include a Kconfig
requirement for that.
Enabling Rust will select CFI_ICALL_NORMALIZE_INTEGERS because the flag
is required to use Rust with CFI. Using select rather than `depends on`
avoids the case where Rust is not visible in menuconfig due to
CFI_ICALL_NORMALIZE_INTEGERS not being enabled. One disadvantage of
select is that RUST must `depends on` all of the things that
CFI_ICALL_NORMALIZE_INTEGERS depends on to avoid invalid configurations.
Alice has been using KCFI on her phone for several months, so it is
reasonably well tested on arm64.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Gatlin Newhouse <gatlin.newhouse@gmail.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240801-kcfi-v2-2-c93caed3d121@google.com
[ Replaced `!FINEIBT` requirement with `!CALL_PADDING` to prevent
a build error on older Rust compilers. Fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When DEBUG_INFO_DWARF5 is selected, pahole 1.21+ is required to enable
DEBUG_INFO_BTF.
When DEBUG_INFO_DWARF4 or DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is selected,
DEBUG_INFO_BTF can be enabled without pahole installed, but a build error
will occur in scripts/link-vmlinux.sh:
LD .tmp_vmlinux1
BTF: .tmp_vmlinux1: pahole (pahole) is not available
Failed to generate BTF for vmlinux
Try to disable CONFIG_DEBUG_INFO_BTF
We did not guard DEBUG_INFO_BTF by PAHOLE_VERSION when previously
discussed [1].
However, commit 613fe16923 ("kbuild: Add CONFIG_PAHOLE_VERSION")
added CONFIG_PAHOLE_VERSION after all. Now several CONFIG options, as
well as the combination of DEBUG_INFO_BTF and DEBUG_INFO_DWARF5, are
guarded by PAHOLE_VERSION.
The remaining compile-time check in scripts/link-vmlinux.sh now appears
to be an awkward inconsistency.
This commit adopts Nathan's original work.
[1]: https://lore.kernel.org/lkml/20210111180609.713998-1-natechancellor@gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240913173759.1316390-2-masahiroy@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to create the file at build time, modules.builtin.ranges, that
contains the range of addresses for all built-in modules, there needs to
be a way to identify what code is compiled into modules.
To identify what code is compiled into modules during a kernel build,
one can look for the presence of the -DKBUILD_MODFILE and -DKBUILD_MODNAME
options in the compile command lines. A simple grep in .*.cmd files for
those options is sufficient for this.
Unfortunately, these options are only passed when compiling C source files.
Various modules also include objects built from assembler source, and these
options are not passed in that case.
Adding $(modfile_flags) to modkern_aflags (similar to modkern_cflags), and
adding $(modname_flags) to a_flags (similar to c_flags) makes it possible
to identify which objects are compiled into modules for both C and
assembler source files. While KBUILD_MODFILE is sufficient to generate
the modules ranges data, KBUILD_MODNAME is passed as well for consistency
with the C source code case.
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When building the Linux kernel on an aarch64 macOS based host, if we don't
specify a value for ARCH when invoking make, we default to arm and thus
multi_v7_defconfig rather than the expected arm64 and arm64's defconfig.
This is because subarch.include invokes `uname -m` which on MacOS hosts
evaluates to `arm64` but on Linux hosts evaluates to `aarch64`,
This allows us to build ARCH=arm64 natively on macOS (as in ARCH need
not be specified on an aarch64-based system).
Avoid matching arm64 by excluding it from the arm.* sed expression.
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Suggested-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/Makefile.lib is included not only from scripts/Makefile.build
but also from scripts/Makefile.{modfinal,package,vmlinux,vmlinux_o},
where DT build rules are not required.
Split the DT build rules out to scripts/Makefile.dtbs, and include it
only when necessary.
While I was here, I added $(DT_TMP_SCHEMA) as a prerequisite of
$(multi-dtb-y).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Flex and Bison are used only for host programs. Move their intermediate
target processing from scripts/Makefile.build to scripts/Makefile.host.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Various information about modules is compiled into the info sections.
For that a dedicated .mod.c file is generated by modpost for each module
and then linked into the module.
However most of the information in the .mod.c is the same for all
modules, internal and external.
Split the shared information into a dedicated source file that is
compiled once and then linked into all modules.
This avoids frequent rebuilds for all .mod.c files when using
CONFIG_LOCALVERSION_AUTO because the local version ends up in .mod.c
through UTS_RELEASE and VERMAGIC_STRING.
The modules are still relinked in this case.
The code is also easier to maintain as it's now in a proper source file
instead of an inline string literal.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Remove the recently-added dependency on the truncate program for
building the kernel. truncate is not available when building the kernel
under Yocto. It could be added, but it would be better just to avoid
the unnecessary dependency.
Fixes: 1472464c62 ("kbuild: avoid scripts/kallsyms parsing /dev/null")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add a new debug package to the PKGBUILD for the pacman-pkg target. The
debug package includes the non-stripped vmlinux file with debug symbols
for kernel debugging and profiling. The file is installed at
/usr/src/debug/${pkgbase}, with a symbolic link at
/usr/lib/modules/$(uname -r)/build/vmlinux. The debug package is built
by default.
Signed-off-by: Jose Fernandez <jose.fernandez@linux.dev>
Reviewed-by: Peter Jung <ptr1337@cachyos.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now that we support several Rust versions, introduce
`CONFIG_RUSTC_VERSION` so that it can be used in Kconfig to enable and
disable configuration options based on the `rustc` version.
The approach taken resembles `pahole`'s -- see commit 613fe16923
("kbuild: Add CONFIG_PAHOLE_VERSION"), i.e. a simple version parsing
without trying to identify several kinds of compilers, since so far
there is only one (`rustc`).
However, unlike `pahole`'s, we also print a zero if executing failed for
any reason, rather than checking if the command is found and executable
(which still leaves things like a file that exists and is executable,
but e.g. is built for another platform [1]). An equivalent approach to
the one here was also submitted for `pahole` [2].
Link: https://lore.kernel.org/rust-for-linux/CANiq72=4vX_tJMJLE6e+bg7ZECHkS-AQpm8GBzuK75G1EB7+Nw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/linux-kbuild/20240728125527.690726-1-ojeda@kernel.org/ [2]
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240902165535.1101978-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
$cur_version is currently being tested twice with the first test
resulting in an unhelpful "$sphinx returned an error", not continuing to
the more helpful "$sphinx didn't return its version".
This patch removes the first test to return the more useful message.
Fixes: a8b380c379 ("scripts: sphinx-pre-install: only ask to activate valid venvs")
Signed-off-by: Sebastian Muxel <sebastian@muxel.dev>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240827133224.160776-1-sebastian@muxel.dev
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmbUG7oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7LUH/26M4QJ5UGJHsehd
bbHlE4or0jibFyMbUiYDOElqLITjCVH6mi3Kv3E7sfyLxSsglVRRNzLCTq/UgTf8
E1L90q4wCySElzzIhH6cltuQdAhs7pRWs5BETByvIW+g+ayN0LZxUPbvB8yl/nOU
Zx8flBEuM2isuRlnx+iRccbf2PxNadSkSYg2TlmZr8mfFKCiRxjU7x355Q3UcylQ
b8S2jVgq69CSDF3IBOzwHZjdq5OceDsO8he0KcfSTvSgyFMcwhntAT397YEnFXnk
KKjKPNCu3KqHtTxsi4Sc0wOxVcgctDv4OPethaL8yROQ7jdBTkvNpPT1yMf7bca8
ZLpSo5Y=
=TBcj
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rc6' into docs-mw
This is done primarily to get a docs build fix merged via another tree so
that "make htmldocs" stops failing.
Various DT and fwnode functions take a compatible string as a parameter.
These are often used in cases which don't have a driver, so they've been
missed.
The additional checks add about 400 more undocumented compatible
strings.
Link: https://lore.kernel.org/all/20240903200753.2097911-1-robh@kernel.org/
Acked-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
When KASAN support was being added to the Linux kernel, GCC did not yet
support all of the KASAN-related compiler options. Thus, the KASAN
Makefile had to probe the compiler for supported options.
Nowadays, the Linux kernel GCC version requirement is 5.1+, and thus we
don't need the probing of the -fasan-shadow-offset parameter: it exists in
all 5.1+ GCCs.
Simplify the KASAN Makefile to drop CFLAGS_KASAN_MINIMAL.
Also add a few more comments and unify the indentation.
[andreyknvl@gmail.com: comments fixes per Miguel]
Link: https://lkml.kernel.org/r/20240814161052.10374-1-andrey.konovalov@linux.dev
Link: https://lkml.kernel.org/r/20240813224027.84503-1-andrey.konovalov@linux.dev
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 9e663f4811 ("slimbus: core: add support to uevent") added the
MODALIAS=slim:* uevent variable, but modpost does not generate the
corresponding MODULE_ALIAS().
To support automatic module loading, slimbus drivers still need to
manually add MODULE_ALIAS("slim:<manf_id>:<prod_code>:*"), as seen in
sound/soc/codecs/wcd9335.c.
To automate this, make modpost generate the proper MODULE_ALIAS() from
MODULE_DEVICE_TABLE(slim, ).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240902141004.70048-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When no parameters are passed, the usage instructions are presented only
when debuginfod-find is not found. This makes sense because with
debuginfod none of the positional parameters are needed. However it means
that users having debuginfod-find installed will have no chance of reading
the usage text without opening the file.
Many programs have a '-h' flag to get the usage, so add such a flag.
Invoking 'scripts/decode_stacktrace.sh -h' will now show the usage text
and exit.
Link: https://lkml.kernel.org/r/20240823-decode_stacktrace-find_module-improvements-v2-3-d7a57d35558b@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The syntax as expressed by usage() is not entirely correct: "<modules
path>" cannot be passed without "<base path>|auto". Additionally human
reading of this syntax can be subject to misunderstanding due the mixture
of '|' and '[]'.
Improve readability in various ways:
* rewrite using two lines for the two allowed usages
* add square brackets around "<vmlinux>" as it is optional when using
debuginfod-find
* move "<modules path>" to inside the square brackets of the 2nd
positional parameter
* use underscores instead of spaces in <...> strings
Link: https://lkml.kernel.org/r/20240823-decode_stacktrace-find_module-improvements-v2-2-d7a57d35558b@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "scripts/decode_stacktrace.sh: improve error reporting and
usability", v2.
This small series improves usability of scripts/decode_stacktrace.sh by
improving the usage text and correctly reporting when modules are built
without debugging symbols.
This patch (of 3):
The find_module() function can fail for two reasons:
* the module was not found
* the module was found but without debugging info
In both cases the user is reported the same error:
WARNING! Modules path isn't set, but is needed to parse this symbol
This is misleading in case the modules path is set correctly.
find_module() is currently implemented as a recursive function based on
global variables in order to check up to 4 different paths. This is not
straightforward to read and even less to modify.
Besides, the debuginfo code at the beginning of find_module() is executed
identically every time the function is entered, i.e. up to 4 times per
each module search due to recursion.
To be able to improve error reporting, first rewrite the find_module()
function to remove recursion. The new version of the function iterates
over all the same (up to 4) paths as before and for each of them does the
same checks as before. At the end of the iteration it is now able to
print an appropriate error message, so that has been moved from the caller
into find_module().
Finally, when the module is found but without debugging info, mention the
two Kconfig variables one needs to set in order to have the needed
debugging symbols.
Link: https://lkml.kernel.org/r/20240823-decode_stacktrace-find_module-improvements-v2-0-d7a57d35558b@bootlin.com
Link: https://lkml.kernel.org/r/20240823-decode_stacktrace-find_module-improvements-v2-1-d7a57d35558b@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
nix only puts /usr/bin/env at the standard location (as required by
posix), so shebangs have to be tweaked.
Link: https://lkml.kernel.org/r/20240817215025.161628-1-kent.overstreet@linux.dev
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Elliot Berman <quic_eberman@quicinc.com>
Cc: Xiong Nandi <xndchn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(gdb) lx-mounts
mount super_block devname pathname fstype options
Python Exception <class 'gdb.error'>: There is no member named list.
Error occurred in Python: There is no member named list.
We encounter the above issue after commit 2eea9ce431 ("mounts: keep
list of mounts in an rbtree"). The commit move a mount from list into
rbtree.
So we can instead use rbtree to iterate all mounts information.
Link: https://lkml.kernel.org/r/20240723064902.124154-4-kuan-ying.lee@canonical.com
Fixes: 2eea9ce431 ("mounts: keep list of mounts in an rbtree")
Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add inorder iteration function for rbtree usage.
This is a preparation patch for the next patch to fix the gdb mounts
issue.
Link: https://lkml.kernel.org/r/20240723064902.124154-3-kuan-ying.lee@canonical.com
Fixes: 2eea9ce431 ("mounts: keep list of mounts in an rbtree")
Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix some GDB command error and add some GDB commands", v3.
Fix some GDB command errors and add some useful GDB commands.
This patch (of 5):
Commit 7988e5ae2b ("tick: Split nohz and highres features from
nohz_mode") and commit 7988e5ae2b ("tick: Split nohz and highres
features from nohz_mode") move 'tick_stopped' and 'nohz_mode' to flags
field which will break the gdb lx-mounts command:
(gdb) lx-timerlist
Python Exception <class 'gdb.error'>: There is no member named nohz_mode.
Error occurred in Python: There is no member named nohz_mode.
(gdb) lx-timerlist
Python Exception <class 'gdb.error'>: There is no member named tick_stopped.
Error occurred in Python: There is no member named tick_stopped.
We move 'tick_stopped' and 'nohz_mode' to flags field instead.
Link: https://lkml.kernel.org/r/20240723064902.124154-1-kuan-ying.lee@canonical.com
Link: https://lkml.kernel.org/r/20240723064902.124154-2-kuan-ying.lee@canonical.com
Fixes: a478ffb2ae ("tick: Move individual bit features to debuggable mask accesses")
Fixes: 7988e5ae2b ("tick: Split nohz and highres features from nohz_mode")
Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Recently, I saw a patch[1] on the ext4 mailing list regarding
the correction of a macro definition error. Jan mentioned
that "The bug in the macro is a really nasty trap...".
Because existing compilers are unable to detect
unused parameters in macro definitions. This inspired me
to write a script to check for unused parameters in
macro definitions and to run it.
Surprisingly, the script uncovered numerous issues across
various subsystems, including filesystems, drivers, and sound etc.
Some of these issues involved parameters that were accepted
but never used, for example:
#define XFS_DAENTER_DBS(mp,w) \
(XFS_DA_NODE_MAXDEPTH + (((w) == XFS_DATA_FORK) ? 2 : 0))
where mp was unused.
While others are actual bugs.
For example:
#define HAL_SEQ_WCSS_UMAC_CE0_SRC_REG(x) \
(ab->hw_params.regs->hal_seq_wcss_umac_ce0_src_reg)
#define HAL_SEQ_WCSS_UMAC_CE0_DST_REG(x) \
(ab->hw_params.regs->hal_seq_wcss_umac_ce0_dst_reg)
#define HAL_SEQ_WCSS_UMAC_CE1_SRC_REG(x) \
(ab->hw_params.regs->hal_seq_wcss_umac_ce1_src_reg)
#define HAL_SEQ_WCSS_UMAC_CE1_DST_REG(x) \
(ab->hw_params.regs->hal_seq_wcss_umac_ce1_dst_reg)
where x was entirely unused, and instead, a local variable ab was used.
I have submitted patches[2-5] to fix some of these issues,
but due to the large number, many still remain unaddressed.
I believe that the kernel and matainers would benefit from
this script to check for unused parameters in macro definitions.
It should be noted that it may cause some false positives
in conditional compilation scenarios, such as
#ifdef DEBUG
static int debug(arg) {};
#else
#define debug(arg)
#endif
So the caller needs to manually verify whether it is a true
issue. But this should be fine, because Maintainers should only
need to review their own subsystems, which typically results
in only a few reports.
[1]: https://patchwork.ozlabs.org/project/linux-ext4/patch/1717652596-58760-1-git-send-email-carrionbent@linux.alibaba.com/
[2]: https://lore.kernel.org/linux-xfs/20240721112701.212342-1-sunjunchao2870@gmail.com/
[3]: https://lore.kernel.org/linux-bcachefs/20240721123943.246705-1-sunjunchao2870@gmail.com/
[4]: https://sourceforge.net/p/linux-f2fs/mailman/message/58797811/
[5]: https://sourceforge.net/p/linux-f2fs/mailman/message/58797812/
[sunjunchao2870@gmail.com: reduce false positives]
Link: https://lkml.kernel.org/r/20240726031310.254742-1-sunjunchao2870@gmail.com
Link: https://lkml.kernel.org/r/20240723091154.52458-1-sunjunchao2870@gmail.com
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Junchao Sun <sunjunchao2870@gmail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use LZMA2 options that match the arch-specific alignment of instructions.
This change reduces compressed kernel size 0-2 % depending on the arch.
On 1-byte-aligned x86 it makes no difference and on 4-byte-aligned archs
it helps the most.
Use the ARM-Thumb filter for ARM-Thumb2 kernels. This reduces compressed
kernel size about 5 %.[1] Previously such kernels were compressed using
the ARM filter which didn't do anything useful with ARM-Thumb2 code.
Add BCJ filter support for ARM64 and RISC-V. Compared to unfiltered XZ or
plain LZMA, the compressed kernel size is reduced about 5 % on ARM64 and 7
% on RISC-V. A new enough version of the xz tool is required: 5.4.0 for
ARM64 and 5.6.0 for RISC-V. With an old xz version, a message is printed
to standard error and the kernel is compressed without the filter.
Update lib/decompress_unxz.c to match the changes to xz_wrap.sh.
Update the CONFIG_KERNEL_XZ help text in init/Kconfig:
- Add the RISC-V and ARM64 filters.
- Clarify that the PowerPC filter is for big endian only.
- Omit IA-64.
Link: https://lore.kernel.org/lkml/1637379771-39449-1-git-send-email-zhongjubin@huawei.com/ [1]
Link: https://lkml.kernel.org/r/20240721133633.47721-15-lasse.collin@tukaani.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reviewed-by: Sam James <sam@gentoo.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Cc: Jules Maselbas <jmaselbas@zdiv.net>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rui Li <me@lirui.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This only affects kernel image compression, not any other xz usage.
Desktop kernels on x86-64 are already around 60 MiB. Using a dictionary
larger than 32 MiB should have no downsides nowadays as anyone building
the kernel should have plenty of RAM. 128 MiB dictionary needs 1346 MiB
of RAM with xz versions 5.0.x - 5.6.x in single-threaded mode. On archs
that use xz_wrap.sh, kernel decompression is done in single-call mode so a
larger dictionary doesn't affect boot-time memory requirements.
xz >= 5.6.0 uses multithreaded mode by default which compresses slightly
worse than single-threaded mode. Kernel compression rarely used more than
one thread anyway because with 32 MiB dictionary size the default block
size was 96 MiB in multithreaded mode. So only a single thread was used
anyway unless the kernel was over 96 MiB.
Comparison to CONFIG_KERNEL_LZMA: It uses "lzma -9" which mapped to 32 MiB
dictionary in LZMA Utils 4.32.7 (the final release in 2008). Nowadays the
lzma tool on most systems is from XZ Utils where -9 maps to 64 MiB
dictionary. So using a 32 MiB dictionary with CONFIG_KERNEL_XZ may have
compressed big kernels slightly worse than the old LZMA option.
Comparison to CONFIG_KERNEL_ZSTD: zstd uses 128 MiB dictionary.
Link: https://lkml.kernel.org/r/20240721133633.47721-14-lasse.collin@tukaani.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reviewed-by: Sam James <sam@gentoo.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Cc: Jules Maselbas <jmaselbas@zdiv.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rui Li <me@lirui.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Fix comments that were no longer in sync with the code below them.
- Fix language errors.
- Fix coding style.
Link: https://lkml.kernel.org/r/20240721133633.47721-5-lasse.collin@tukaani.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reviewed-by: Sam James <sam@gentoo.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Cc: Jules Maselbas <jmaselbas@zdiv.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rui Li <me@lirui.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove the public domain notices and add SPDX license identifiers.
Change MODULE_LICENSE from "GPL" to "Dual BSD/GPL" because 0BSD should
count as a BSD license variant here.
The switch to 0BSD was done in the upstream XZ Embedded project because
public domain has (real or perceived) legal issues in some jurisdictions.
Link: https://lkml.kernel.org/r/20240721133633.47721-4-lasse.collin@tukaani.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reviewed-by: Sam James <sam@gentoo.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Cc: Jules Maselbas <jmaselbas@zdiv.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rui Li <me@lirui.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Richard reports that since 772dd03427 ("mm: enumerate all gfp flags"),
gfp-translate is broken, as the bit numbers are implicit, leaving the
shell script unable to extract them. Even more, some bits are now at a
variable location, making it double extra hard to parse using a simple
shell script.
Use a brute-force approach to the problem by generating a small C stub
that will use the enum to dump the interesting bits.
As an added bonus, we are now able to identify invalid bits for a given
configuration. As an added drawback, we cannot parse include files that
predate this change anymore. Tough luck.
Link: https://lkml.kernel.org/r/20240823163850.3791201-1-maz@kernel.org
Fixes: 772dd03427 ("mm: enumerate all gfp flags")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reported-by: Richard Weinberger <richard@nod.at>
Cc: Petr Tesařík <petr@tesarici.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With commit cda5f94e88 ("modpost: avoid using the alias attribute"),
only two log levels remain: LOG_WARN and LOG_ERROR. Simplify this by
making it a boolean variable.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
objtree is defined and exported by the top-level Makefile. I prefer
not to override it.
There is no need to pass the absolute path of objtree. PKGBUILD can
detect it by itself.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christian Heusel <christian@heusel.eu>
All build and package functions share the following commands:
export MAKEFLAGS="${KBUILD_MAKEFLAGS}"
cd "${objtree}"
Factor out the common code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christian Heusel <christian@heusel.eu>
Introduce the PACMAN_EXTRAPACKAGES variable in PKGBUILD to allow users
to specify which additional packages are built by the pacman-pkg target.
Previously, the api-headers package was always included, and the headers
package was included only if CONFIG_MODULES=y. With this change, both
headers and api-headers packages are included by default. Users can now
control this behavior by setting PACMAN_EXTRAPACKAGES to a
space-separated list of desired extra packages or leaving it empty to
exclude all.
For example, to build only the base package without extras:
make pacman-pkg PACMAN_EXTRAPACKAGES=""
Signed-off-by: Jose Fernandez <jose.fernandez@linux.dev>
Reviewed-by: Peter Jung <ptr1337@cachyos.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christian Heusel <christian@heusel.eu>
Tested-by: Christian Heusel <christian@heusel.eu>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This commit improves the section mismatch warning format when there is
no suitable symbol name to print.
The section mismatch warning prints the reference source in the form
of <symbol_name>+<offset> and the reference destination in the form
of <symbol_name>.
However, there are some corner cases where <symbol_name> becomes
"(unknown)", as reported in commit 23dfd914d2 ("modpost: fix null
pointer dereference").
In such cases, it is better to print the symbol address.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When malloc() fails, there is not much userspace programs can do.
xmalloc() is useful to bail out on a memory allocation failure.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When malloc() or realloc() fails, there is not much userspace programs
can do. xmalloc() and xrealloc() are useful to bail out on a memory
allocation failure.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
P_SYMBOL is a pseudo property that was previously used for data linking
purposes.
It is no longer used except for debug prints. Remove it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I believe its last usage was in the following code:
if (prop == NULL)
prop = stack->sym->prop;
This code was previously used to print the file name and line number of
associated symbols in sym_check_print_recursive(), which was removed by
commit 9d0d266046 ("kconfig: recursive checks drop file/lineno").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit ca4c74ba30 ("kconfig: remove P_CHOICE property"),
menu_finalize() no longer calls menu_add_symbol(). No function
references cur_filename or cur_lineno after yyparse().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Parallel execution is supported by GNU Make:
$ make -j<N> modules_install
It is questionable to enable multithreading within each zstd process
by default.
If you still want to do it, you can use the environment variable:
$ ZSTD_NBTHREADS=<N> make modules_install
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
A long standing issue in the upstream kernel packaging is that the
linux-headers package is not cross-compiled.
For example, you can cross-build Debian packages for arm64 by running
the following command:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg
However, the generated linux-headers-*_arm64.deb is useless because the
host programs in it were built for your build machine architecture
(likely x86), not arm64.
The Debian kernel maintains its own Makefiles to cross-compile host
tools without relying on Kbuild. [1]
Instead of adding such full custom Makefiles, this commit adds a small
piece of code to cross-compile host programs located under the scripts/
directory.
A straightforward solution is to pass HOSTCC=${CROSS_COMPILE}gcc, but it
would also cross-compile scripts/basic/fixdep, which needs to be native
to process the if_changed_dep macro. (This approach may work under some
circumstances; you can execute foreign architecture programs with the
help of binfmt_misc because Debian systems enable CONFIG_BINFMT_MISC,
but it would require installing QEMU and libc for that architecture.)
A trick is to use the external module build (KBUILD_EXTMOD=), which
does not rebuild scripts/basic/fixdep. ${CC} needs to be able to link
userspace programs (CONFIG_CC_CAN_LINK=y).
There are known limitations:
- GCC plugins
It would possible to rebuild GCC plugins for the target architecture
by passing HOSTCXX=${CROSS_COMPILE}g++ with necessary packages
installed, but gcc on the installed system emits
"cc1: error: incompatible gcc/plugin versions".
- objtool and resolve_btfids
These are built by the tools build system. They are not covered by
the current solution. The resulting linux-headers package is broken
if CONFIG_OBJTOOL or CONFIG_DEBUG_INFO_BTF is enabled.
I only tested this with Debian, but it should work for other package
systems as well.
[1]: https://salsa.debian.org/kernel-team/linux/-/blob/debian/6.9.9-1/debian/rules.real#L586
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Endianness is currently detected on compile-time, but we can defer this
until run-time. This change avoids re-executing scripts/mod/mk_elfconfig
even if modpost in the linux-headers package needs to be rebuilt for a
foreign architecture.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
HOST_ELFCLASS is output to elfconfig.h, but it is not used in modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
For example Documentation/adming-guide/bug-hunting.rst suggest using
get_maintainer.pl to get a list of maintainers and mailing lists to
report bugs to, while a number of subsystems and drivers explicitly use
the "B:" MAINTAINERS entry to direct bug reports at issue trackers
instead of mailing lists and people.
Add the --bug option to get_maintainer.pl to print the bug reporting
URIs, if any.
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240815113450.3397499-1-jani.nikula@intel.com
As we discussed in the room at netdevconf earlier this week,
drop the requirement for special comment style for netdev.
For checkpatch, the general check accepts both right now, so
simply drop the special request there as well.
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some configuration options such as the supported sanitizer list are
arrays. To support using Rust with sanitizers on x86, we must update the
target.json generator to support this case.
The Push trait is removed in favor of the From trait because the Push
trait doesn't work well in the nested case where you are not really
pushing values to a TargetSpec.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gatlin Newhouse <gatlin.newhouse@gmail.com>
Link: https://lore.kernel.org/r/20240730-target-json-arrays-v1-1-2b376fd0ecf4@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This typo in scripts/Makefile.build has been present for more than 20
years. It was accidentally copy-pasted to other scripts/Makefile.* files.
Fix them all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Enables an IPE policy to be enforced from kernel start, enabling access
control based on trust from kernel startup. This is accomplished by
transforming an IPE policy indicated by CONFIG_IPE_BOOT_POLICY into a
c-string literal that is parsed at kernel startup as an unsigned policy.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The kernel configuration allows specifying a module compression mode. If
one is selected then each module gets compressed during
'make modules_install' and additionally one can also enable support for
a respective direct in-kernel decompression support. This means that the
decompression support cannot be enabled without the automatic compression.
Some distributions, such as the (open)SUSE family, use a signer service for
modules. A build runs on a worker machine but signing is done by a separate
locked-down server that is in possession of the signing key. The build
invokes 'make modules_install' to create a modules tree, collects
information about the modules, asks the signer service for their signature,
appends each signature to the respective module and compresses all modules.
When using this arrangment, the 'make modules_install' step produces
unsigned+uncompressed modules and the distribution's own build recipe takes
care of signing and compression later.
The signing support can be currently enabled without automatically signing
modules during 'make modules_install'. However, the in-kernel decompression
support can be selected only after first enabling automatic compression
during this step.
To allow only enabling the in-kernel decompression support without the
automatic compression during 'make modules_install', separate the
compression options similarly to the signing options, as follows:
> Enable loadable module support
[*] Module compression
Module compression type (GZIP) --->
[*] Automatically compress all modules
[ ] Support in-kernel module decompression
* "Module compression" (MODULE_COMPRESS) is a new main switch for the
compression/decompression support. It replaces MODULE_COMPRESS_NONE.
* "Module compression type" (MODULE_COMPRESS_<type>) chooses the
compression type, one of GZ, XZ, ZSTD.
* "Automatically compress all modules" (MODULE_COMPRESS_ALL) is a new
option to enable module compression during 'make modules_install'. It
defaults to Y.
* "Support in-kernel module decompression" (MODULE_DECOMPRESS) enables
in-kernel decompression.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Now that we should be `objtool`-warning free, enable `objtool` for
Rust too.
Before this patch series, we were already getting warnings under e.g. IBT
builds, since those would see Rust code via `vmlinux.o`.
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240725183325.122827-7-ojeda@kernel.org
[ Solved trivial conflict. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Support `MITIGATION_SLS` by enabling the target features that Clang does.
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...next_up+0x44: missing int3 after ret
These should be eventually enabled via `-Ctarget-feature` when `rustc`
starts recognizing them (or via a new dedicated flag) [1].
Link: https://github.com/rust-lang/rust/issues/116851 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240725183325.122827-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Support `MITIGATION_RETPOLINE` by enabling the target features that
Clang does.
The existing target feature being enabled was a leftover from
our old `rust` branch, and it is not enough: the target feature
`retpoline-external-thunk` only implies `retpoline-indirect-calls`, but
not `retpoline-indirect-branches` (see LLVM's `X86.td`), unlike Clang's
flag of the same name `-mretpoline-external-thunk` which does imply both
(see Clang's `lib/Driver/ToolChains/Arch/X86.cpp`).
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...escape_default+0x13: indirect jump found in RETPOLINE build
In addition, change the comment to note that LLVM is the one disabling
jump tables when retpoline is enabled, thus we do not need to use
`-Zno-jump-tables` for Rust here -- see commit c58f2166ab39 ("Introduce
the "retpoline" x86 mitigation technique ...") [1]:
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In
many cases, the compiler can simply use directed conditional
branches and a small search tree. LLVM already has support for
lowering switches in this way and the first step of this patch is
to disable jump-table lowering of switches and introduce a pass to
rewrite explicit indirectbr sequences into a switch over integers.
As well as a live example at [2].
These should be eventually enabled via `-Ctarget-feature` when `rustc`
starts recognizing them (or via a new dedicated flag) [3].
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: c58f2166ab [1]
Link: https://godbolt.org/z/G4YPr58qG [2]
Link: https://github.com/rust-lang/rust/issues/116852 [3]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/945
Link: https://lore.kernel.org/r/20240725183325.122827-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked
in upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
-----BEGIN PGP SIGNATURE-----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=2uNw
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux
Pull rust fixes from Miguel Ojeda:
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
rust: x86: remove `-3dnow{,a}` from target features
kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
rust: add intrinsics to fix `-Os` builds
kbuild: rust: skip -fmin-function-alignment in bindgen flags
rust: Support latest version of `rust-analyzer`
rust: macros: indent list item in `module!`'s docs
rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
Some pending overlay additions need the graph check fix.
This adds the following commits from upstream:
bcd02b523429 fdtoverlay: remove wrong singular article in a comment
84b056a89d3c checks: relax graph checks for overlays
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Cleaning up the symbols causes various issues afterwards. Let's sort
the list based on original name.
Signed-off-by: Song Liu <song@kernel.org>
Fixes: 8cc32a9bbf ("kallsyms: strip LTO-only suffixes from promoted global functions")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240807220513.3100483-2-song@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
As done with str_up_down(), add checks for str_down_up() opportunities.
5 cases currently exist in the tree.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240812183637.work.999-kees@kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
There are some issues in the test_fortify Makefile code.
Problem 1: cc-disable-warning invokes compiler dozens of times
To see how many times the cc-disable-warning is evaluated, change
this code:
$(call cc-disable-warning,fortify-source)
to:
$(call cc-disable-warning,$(shell touch /tmp/fortify-$$$$)fortify-source)
Then, build the kernel with CONFIG_FORTIFY_SOURCE=y. You will see a
large number of '/tmp/fortify-<PID>' files created:
$ ls -1 /tmp/fortify-* | wc
80 80 1600
This means the compiler was invoked 80 times just for checking the
-Wno-fortify-source flag support.
$(call cc-disable-warning,fortify-source) should be added to a simple
variable instead of a recursive variable.
Problem 2: do not recompile string.o when the test code is updated
The test cases are independent of the kernel. However, when the test
code is updated, $(obj)/string.o is rebuilt and vmlinux is relinked
due to this dependency:
$(obj)/string.o: $(obj)/$(TEST_FORTIFY_LOG)
always-y is suitable for building the log files.
Problem 3: redundant code
clean-files += $(addsuffix .o, $(TEST_FORTIFY_LOGS))
... is unneeded because the top Makefile globally cleans *.o files.
This commit fixes these issues and makes the code readable.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240727150302.1823750-2-masahiroy@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
On macOS, as reported by Daniel Gomez, getline() sets ENOTTY to errno
if it is requested to read from /dev/null.
If this is worth fixing, I would rather pass an empty file to
scripts/kallsyms instead of adding the ugly #ifdef __APPLE__.
Fixes: c442db3f49 ("kbuild: remove PROVIDE() for kallsyms symbols")
Reported-by: Daniel Gomez <da.gomez@samsung.com>
Closes: https://lore.kernel.org/all/20240807-macos-build-support-v1-12-4cd1ded85694@samsung.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
LLVM 19 is dropping support for 3DNow! in commit f0eb5587ceeb ("Remove
support for 3DNow!, both intrinsics and builtins. (#96246)"):
Remove support for 3DNow!, both intrinsics and builtins. (#96246)
This set of instructions was only supported by AMD chips starting in
the K6-2 (introduced 1998), and before the "Bulldozer" family
(2011). They were never much used, as they were effectively superseded
by the more-widely-implemented SSE (first implemented on the AMD side
in Athlon XP in 2001).
This is being done as a predecessor towards general removal of MMX
register usage. Since there is almost no usage of the 3DNow!
intrinsics, and no modern hardware even implements them, simple
removal seems like the best option.
Thus we should avoid passing these to the backend, since otherwise we
get a diagnostic about it:
'-3dnow' is not a recognized feature for this target (ignoring feature)
'-3dnowa' is not a recognized feature for this target (ignoring feature)
We could try to disable them only up to LLVM 19 (not the C side one,
but the one used by `rustc`, which may be built with a range of
LLVMs). However, to avoid more complexity, we can likely just remove
them altogether. According to Nikita [2]:
> I don't think it's needed because LLVM should not generate 3dnow
> instructions unless specifically asked to, using intrinsics that
> Rust does not provide in the first place.
Thus do so, like Rust did for one of their builtin targets [3].
For those curious: Clang will warn only about trying to enable them
(`-m3dnow{,a}`), but not about disabling them (`-mno-3dnow{,a}`), so
there is no change needed there.
Cc: Nikita Popov <github@npopov.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: x86@kernel.org
Link: f0eb5587ce [1]
Link: https://github.com/rust-lang/rust/pull/127864#issuecomment-2235898760 [2]
Link: https://github.com/rust-lang/rust/pull/127864 [3]
Closes: https://github.com/Rust-for-Linux/linux/issues/1094
Tested-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240806144558.114461-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sets the `sysroot` field in rust-project.json which is now needed in
newer versions of rust-analyzer instead of the `sysroot_src` field.
Till [1] `rust-analyzer` used to guess the `sysroot` based on the
`sysroot_src` at [2]. Now `sysroot` is a required parameter for a
`rust-project.json` file. It is required because `rust-analyzer`
need it to find the proc-macro server [3].
In the current version of `rust-analyzer` the `sysroot_src` is only used
to include the inbuilt library crates (std, core, alloc, etc) [4]. Since
we already specify the core library to be included in the
`rust-project.json` we don't need to define the `sysroot_src`.
Code editors like VS Code try to use the latest version of rust-analyzer
(which is updated every week) instead of the version of rust-analyzer
that comes with the rustup toolchain (which is updated every six weeks
along with the rust version).
Without this change `rust-analyzer` is breaking for anyone using VS Code.
As they are getting the latest version of `rust-analyzer` with the
changes made in [1].
`rust-analyzer` will also start breaking for other developers as they
update their rust version (assuming that also updates the rust-analyzer
version on their system).
This patch should work with every setup as there is no more guess work
being done by `rust-analyzer`.
[ Lukas, who leads the rust-analyzer team, says:
`sysroot_src` is required now if you want to have the sysroot
source libraries be loaded. I think we used to infer it as
`{sysroot}/lib/rustlib/src/rust/library` before when only the
`sysroot` field was given but that was since changed to make it
possible in having a sysroot without the standard library sources
(that is only have the binaries available). So if you want the
library sources to be loaded by rust-analyzer you will have to set
that field as well now.
- Miguel ]
Link: https://github.com/rust-lang/rust-analyzer/pull/17287 [1]
Link: f372a8a117/crates/project-model/src/workspace.rs (L367-L374) [2]
Link: eeb192b79a/crates/project-model/src/sysroot.rs (L180-L192) [3]
Link: https://github.com/search?q=repo%3AVeykril%2Frust-analyzer%20src_root()&type=code [4]
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Sarthak Singh <sarthak.singh99@gmail.com>
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/291565-Help/topic/How.20to.20rust-analyzer.20correctly.20working
Link: https://lore.kernel.org/r/20240724172713.899399-1-sarthak.singh99@gmail.com
[ Formatted comment, fixed typo and removed spurious empty line. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The conversion from the old unistd.h file to syscall.tbl dropped the
nfsservctl macro. This one was handled inconsistently across architectures
in the original introduction of the syscall.tbl format, and I went the
other way on this.
The syscall was already gone in linux-3.1 before the current users
of the generic table (other than openrisc) first appeared, so nobody
could actally use it, but putting the number back helps for consistency
since there are build scripts that check the presence of all these
macros.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2301919
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When merging files without trailing newlines at the end of the file, two
config fragments end up at the same row if file1.config doens't have a
trailing newline at the end of the file.
file1.config "CONFIG_1=y"
file2.config "CONFIG_2=y"
./scripts/kconfig/merge_config.sh -m .config file1.config file2.config
This will generate a .config looking like this.
cat .config
...
CONFIG_1=yCONFIG_2=y"
Making sure so we add a newline at the end of every config file that is
passed into the script.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When resolving a merge conflict, Linus noticed the fdtoverlay command
duplication introduced by commit 49636c5680 ("kbuild: verify dtoverlay
files against schema"). He suggested a clean-up.
I eliminated the duplication and refactored the code a little further.
No functional changes are intended, except for the short logs.
The log will look as follows:
$ make ARCH=arm64 defconfig dtbs_check
[ snip ]
DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb
DTC arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtbo
OVL [C] arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtb
The tag [C] indicates that the schema check is executed.
Link: https://lore.kernel.org/lkml/CAHk-=wiF3yeWehcvqY-4X7WNb8n4yw_5t0H1CpEpKi7JMjaMfw@mail.gmail.com/#t
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The previous patch to fix the newfstatat() syscall entry ended up breaking
fstat() instead. Unfortunately these two are not handled the same way, so
I messed this one up the exact opposite way.
Fixes: 343416f0c1 ("syscalls: fix syscall macros for newfstat/newfstatat")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The __NR_newfstat and __NR_newfstatat macros accidentally got renamed
in the conversion to the syscall.tbl format, dropping the 'new' portion
of the name.
In an unrelated change, the two syscalls are no longer architecture
specific but are once more defined on all 64-bit architectures, so the
'newstat' ABI keyword can be dropped from the table as a simplification.
Fixes: Fixes: 4fe53bf2ba ("syscalls: add generic scripts/syscall.tbl")
Closes: https://lore.kernel.org/lkml/838053e0-b186-4e9f-9668-9a3384a71f23@app.fastmail.com/T/#t
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df ("uprobe: Wire up uretprobe system call")
Fixes: 63ded11097 ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch 1) fixes all the issues (not most) reported by pylint,
2) add the functionability to tackle documents that need translation,
3) add logging to adjust the logging level and log file
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240719041400.3909775-2-dzm91@hust.edu.cn
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts, which
is an error with the latest Clang
-----BEGIN PGP SIGNATURE-----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=HYew
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a7 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0 ("x86: implement x86_32 stack protector")
Link: 6461e53781 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
