Separate early_serial_console from tty.c
This allows for reuse of
early_serial_console.c/string.c/printf.c/cmdline.c in boot/compressed/.
-v2: according to hpa, don't include string.c etc
-v3: compressed/misc.c must have early_serial_base as static, so move it back to tty.c
for setup code
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C568D2B.205@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
In order for global variables and functions to work in the
decompressor, we need to fix up the GOT in assembly code.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <4C57382E.8050501@zytor.com>
We mapped vdso pages but never unmapped them and the virtual address
is lost after exiting from the function, so unmap vdso pages here.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <20100802004934.GA2505@sli10-desk.sh.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
It is paramount that we call pci_xen_swiotlb_detect before
pci_swiotlb_detect as both implementations use the 'swiotlb'
and 'swiotlb_force' flags. The pci-xen_swiotlb_detect inhibits
the swiotlb_force and swiotlb flag so that the native SWIOTLB
implementation is not enabled when running under Xen.
[since v1 changed two Cc's to Acked-by]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
[http://lkml.org/lkml/2010/7/27/374]
Cc: Albert Herranz <albert_herranz@yahoo.es>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
[conditional http://lkml.org/lkml/2010/8/2/324]
Cc: x86@kernel.org
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Accomodate the original C1E-aware idle routine to the different times
during boot when the BIOS enables C1E. While at it, remove the synthetic
CPUID flag in favor of a single global setting which denotes C1E status
on the system.
[ hpa: changed c1e_enabled to be a bool; clarified cpu bit 3:21 comment ]
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
LKML-Reference: <20100727165335.GA11630@aftab>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
vmx does not restore GDT.LIMIT to the host value, instead it sets it to 64KB.
This means host userspace can learn a few bits of host memory.
Fix by reloading GDTR when we load other host state.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Sometimes, atomically set spte is not needed, this patch call __xchg_spte()
more smartly
Note: if the old mapping's access bit is already set, we no need atomic operation
since the access bit is not lost
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce set_spte_track_bits() to cleanup current code
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the old mapping is not present, the spte.a is not lost, so no need
atomic operation to set it
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In sync-page path, if spte.writable is changed, it will lose page dirty
tracking, for example:
assume spte.writable = 0 in a unsync-page, when it's synced, it map spte
to writable(that is spte.writable = 1), later guest write spte.gfn, it means
spte.gfn is dirty, then guest changed this mapping to read-only, after it's
synced, spte.writable = 0
So, when host release the spte, it detect spte.writable = 0 and not mark page
dirty
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In current code, if ept is enabled(shadow_accessed_mask = 0), the page
accessed tracking is lost.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the speculative path, we should check guest pte's reserved bits just as
the real processor does
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The index wasn't calculated correctly (off by one) for huge spte so KVM guest
was unstable with transparent hugepages.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the destination is a memory operand and the memory cannot
map to a valid page, the xchg instruction emulation and locked
instruction will not work on io regions and stuck in endless
loop. We should emulate exchange as write to fix it.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If pit delivers interrupt while pic is masking it OS will never do EOI
and ack notifier will not be called so when pit will be unmasked no pit
interrupts will be delivered any more. Calling mask notifiers solves this
issue.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
With tdp enabled we should get into emulator only when emulating io, so
reexecution will always bring us back into emulator.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Mark inc (0xfe/0 0xff/0) and dec (0xfe/1 0xff/1) as lock prefix capable.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
'level' and 'sptep' are aliases for 'interator.level' and 'iterator.sptep', no
need for them.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently, when we fetch an spte, we only verify that gptes match those that
the walker saw if we build new shadow pages for them.
However, this misses the following race:
vcpu1 vcpu2
walk
change gpte
walk
instantiate sp
fetch existing sp
Fix by validating every gpte, regardless of whether it is used for building
a new sp or not.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Partition the function into three sections:
- fetching indirect shadow pages (host_level > guest_level)
- fetching direct shadow pages (page_level < host_level <= guest_level)
- the final spte (page_level == host_level)
Instead of the current spaghetti.
A slight change from the original code is that we call validate_direct_spte()
more often: previously we called it only for gw->level, now we also call it for
lower levels. The change should have no effect.
[xiao: fix regression caused by validate_direct_spte() called too late]
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move the code to check whether a gpte has changed since we fetched it into
a helper.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Add a helper to verify that a direct shadow page is valid wrt the required
access permissions; drop the page if it is not valid.
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To clarify spte fetching code, move large spte handling into a helper.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To avoid split accesses to 64 bit sptes on i386, use __set_spte() to link
shadow pages together.
(not technically required since shadow pages are __GFP_KERNEL, so upper 32
bits are always clear)
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To simplify the process of fetching an spte, add a helper that links
a shadow page to an spte.
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Userspace needs to reset and save/restore these MSRs.
The MCE banks are not exposed since their number varies from vcpu to vcpu.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When shadow pages are in use sometimes KVM try to emulate an instruction
when it accesses a shadowed page. If emulation fails KVM un-shadows the
page and reenter guest to allow vcpu to execute the instruction. If page
is not in shadow page hash KVM assumes that this was attempt to do MMIO
and reports emulation failure to userspace since there is no way to fix
the situation. This logic has a race though. If two vcpus tries to write
to the same shadowed page simultaneously both will enter emulator, but
only one of them will find the page in shadow page hash since the one who
founds it also removes it from there, so another cpu will report failure
to userspace and will abort the guest.
Fix this by checking (in addition to checking shadowed page hash) that
page that caused the emulation belongs to valid memory slot. If it is
then reenter the guest to allow vcpu to reexecute the instruction.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently if guest access address that belongs to memory slot but is not
backed up by page or page is read only KVM treats it like MMIO access.
Remove that capability. It was never part of the interface and should
not be relied upon.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Stanse found that there is an omitted unlock in kvm_create_pit in one fail
path. Add proper unlock there.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Gleb Natapov <gleb@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gregory Haskins <ghaskins@novell.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Real hardware disregards permission errors when computing page fault error
code bit 0 (page present). Do the same.
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Bit 4 of the page fault error code is set only if EFER.NX is set.
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch change to use DstAcc for decoding 'mov AL, moffs'
and introduced SrcAcc for decoding 'mov moffs, AL'.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If IOPL check fail, the cli/sti emulate GP and then we should
skip writeback since the default write OP is OP_REG.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The source operand of 'mov rm,sreg' is segment register, not
general-purpose register, so remove SrcReg from decoding.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
'and AL,imm8' should be mask as ByteOp, otherwise the dest operand
length will no correct and we may fill the full EAX when writeback.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fix the comment of out instruction, using the same style as the
other instructions.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
__set_spte() will happily replace an spte with the accessed bit set with
one that has the accessed bit clear. Add a helper update_spte() which checks
for this condition and updates the page flag if needed.
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently, in the window between the check for the accessed bit, and actually
dropping the spte, a vcpu can access the page through the spte and set the bit,
which will be ignored by the mmu.
Fix by using an exchange operation to atmoically fetch the spte and drop it.
Signed-off-by: Avi Kivity <avi@redhat.com>
When we call rmap_remove(), we (almost) always immediately follow it by
an __set_spte() to a nonpresent pte. Since we need to perform the two
operations atomically, to avoid losing the dirty and accessed bits, introduce
a helper drop_spte() and convert all call sites.
The operation is still nonatomic at this point.
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit 341d9b535b6c simplify reload logic while entry guest mode, it
can avoid unnecessary sync-root if KVM_REQ_MMU_RELOAD and
KVM_REQ_MMU_SYNC both set.
But, it cause a issue that when we handle 'KVM_REQ_TLB_FLUSH', the
root is invalid, it is triggered during my test:
Kernel BUG at ffffffffa00212b8 [verbose debug info unavailable]
......
Fixed by directly return if the root is not ready.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Add support for stos access tracing with mmiotrace.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Cc: Nouveau <nouveau@lists.freedesktop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100731205101.GA5860@joi.lan>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Use a direct per-cpu reference for the GDT instead of using a scratch
register.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1280594903-6341-2-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Use a direct per-cpu reference for the IST instead of using a scratch
register.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1280594903-6341-1-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This patch converts unnecessary divide and modulo operations
in the KVM large page related code into logical operations.
This allows to convert gfn_t to u64 while not breaking 32
bit builds.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cleanup this function that we are already get the direct sp's access
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If the mapping is writable but the dirty flag is not set, we will find
the read-only direct sp and setup the mapping, then if the write #PF
occur, we will mark this mapping writable in the read-only direct sp,
now, other real read-only mapping will happily write it without #PF.
It may hurt guest's COW
Fixed by re-install the mapping when write #PF occur.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In no-direct mapping, we mark sp is 'direct' when we mapping the
guest's larger page, but its access is encoded form upper page-struct
entire not include the last mapping, it will cause access conflict.
For example, have this mapping:
[W]
/ PDE1 -> |---|
P[W] | | LPA
\ PDE2 -> |---|
[R]
P have two children, PDE1 and PDE2, both PDE1 and PDE2 mapping the
same lage page(LPA). The P's access is WR, PDE1's access is WR,
PDE2's access is RO(just consider read-write permissions here)
When guest access PDE1, we will create a direct sp for LPA, the sp's
access is from P, is W, then we will mark the ptes is W in this sp.
Then, guest access PDE2, we will find LPA's shadow page, is the same as
PDE's, and mark the ptes is RO.
So, if guest access PDE1, the incorrect #PF is occured.
Fixed by encode the last mapping access into direct shadow page
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
While we sync many unsync sp at one time(in mmu_sync_children()),
we may mapping the spte writable, it's dangerous, if one unsync
sp's mapping gfn is another unsync page's gfn.
For example:
SP1.pte[0] = P
SP2.gfn's pfn = P
[SP1.pte[0] = SP2.gfn's pfn]
First, we write protected SP1 and SP2, but SP1 and SP2 are still the
unsync sp.
Then, sync SP1 first, it will detect SP1.pte[0].gfn only has one unsync-sp,
that is SP2, so it will mapping it writable, but we plan to sync SP2 soon,
at this point, the SP2->unsync is not reliable since later we sync SP2 but
SP2->gfn is already writable.
So the final result is: SP2 is the sync page but SP2.gfn is writable.
This bug will corrupt guest's page table, fixed by mark read-only mapping
if the mapped gfn has shadow pages.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Some guest device driver may leverage the "Non-Snoop" I/O, and explicitly
WBINVD or CLFLUSH to a RAM space. Since migration may occur before WBINVD or
CLFLUSH, we need to maintain data consistency either by:
1: flushing cache (wbinvd) when the guest is scheduled out if there is no
wbinvd exit, or
2: execute wbinvd on all dirty physical CPUs when guest wbinvd exits.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
No need to reload the mmu in between two different vcpu->requests checks.
kvm_mmu_reload() may trigger KVM_REQ_TRIPLE_FAULT, but that will be caught
during atomic guest entry later.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Older versions of 32-bit linux have a "Checking 'hlt' instruction"
test where they repeatedly call the 'hlt' instruction, and then
expect a timer interrupt to kick the CPU out of halt. This happens
before any LAPIC or IOAPIC setup happens, which means that all of
the APIC's are in virtual wire mode at this point. Unfortunately,
the current implementation of virtual wire mode is hardcoded to
only kick the BSP, so if a crash+kexec occurs on a different
vcpu, it will never get kicked.
This patch makes pic_unlock() do the equivalent of
kvm_irq_delivery_to_apic() for the IOAPIC code. That is, it runs
through all of the vcpus looking for one that is in virtual wire
mode. In the normal case where LAPICs and IOAPICs are configured,
this won't be used at all. In the bootstrap phase of a modern
OS, before the LAPICs and IOAPICs are configured, this will have
exactly the same behavior as today; VCPU0 is always looked at
first, so it will always get out of the loop after the first
iteration. This will only go through the loop more than once
during a kexec/kdump, in which case it will only do it a few times
until the kexec'ed kernel programs the LAPIC and IOAPIC.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Enable Intel(R) Advanced Vector Extension(AVX) for guest.
The detection of AVX feature includes OSXSAVE bit testing. When OSXSAVE bit is
not set, even if AVX is supported, the AVX instruction would result in UD as
well. So we're safe to expose AVX bits to guest directly.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If a process with a memory slot is COWed, the page will change its address
(despite having an elevated reference count). This breaks internal memory
slots which have their physical addresses loaded into vmcs registers (see
the APIC access memory slot).
Signed-off-by: Avi Kivity <avi@redhat.com>
Part of the i8259 code pretends it isn't part of kvm, but we know better.
Reduce excessive abstraction, eliminating callbacks and void pointers.
Signed-off-by: Avi Kivity <avi@redhat.com>
As advertised in feature-removal-schedule.txt. Equivalent support is provided
by overlapping memory regions.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of three temporary variables and three free calls, have one temporary
variable (with four names) and one free call.
Signed-off-by: Avi Kivity <avi@redhat.com>
Group 3 instruction with ModRM reg field as 001 is
defined as test instruction under AMD arch, and
emulate_grp3() is ready for emulate it, so fix the
decoding.
static inline int emulate_grp3(...)
{
...
switch (c->modrm_reg) {
case 0 ... 1: /* test */
emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
...
}
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the guest wants to accept timer interrupts on a CPU other
than the BSP, we need to remove this gate.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We really want to "kvm_set_irq" during the hrtimer callback,
but that is risky because that is during interrupt context.
Instead, offload the work to a workqueue, which is a bit safer
and should provide most of the same functionality.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate pusha instruction only writeback the last
EDI register, but the other registers which need
to be writeback is ignored. This patch fixed it.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Fix a slight error with assertion in local APIC code.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
While we mark the parent's unsync_child_bitmap, if the parent is already
unsynced, it no need walk it's parent, it can reduce some unnecessary
workload
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In current code, some page's unsync_child_bitmap is not cleared completely
in mmu_sync_children(), for example, if two PDPEs shard one PDT, one of
PDPE's unsync_child_bitmap is not cleared.
Currently, it not harm anything just little overload, but it's the prepare
work for the later patch
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If the sync-sp just sync transient, don't mark its pte notrap
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The sync page is already write protected in mmu_sync_children(), don't
write protected it again
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Rename 'page' and 'shadow_page' to 'sp' to better fit the context
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.
Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.
Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.
Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch enable guest to use XSAVE/XRSTOR instructions.
We assume that host_xcr0 would use all possible bits that OS supported.
And we loaded xcr0 in the same way we handled fpu - do it as late as we can.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
delay local tlb flush until enter guest moden, it can reduce vpid flush
frequency and reduce remote tlb flush IPI(if KVM_REQ_TLB_FLUSH bit is
already set, IPI is not sent)
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use kvm_mmu_flush_tlb() function instead of calling
kvm_x86_ops->tlb_flush(vcpu) directly.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This remote tlb flush is no necessary since we have synced while
sp is zapped
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The name "pid_sync_vcpu_all" isn't appropriate since it just affect
a single vpid, so rename it to vpid_sync_vcpu_single().
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Using kvm_mmu_prepare_zap_page() and kvm_mmu_zap_page() instead of
kvm_mmu_zap_page() that can reduce remote tlb flush IPI
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the later patch, we will modify sp's zapping way like below:
kvm_mmu_prepare_zap_page A
kvm_mmu_prepare_zap_page B
kvm_mmu_prepare_zap_page C
....
kvm_mmu_commit_zap_page
[ zaped multiple sps only need to call kvm_mmu_commit_zap_page once ]
In __kvm_mmu_free_some_pages() function, the free page number is
getted form 'vcpu->kvm->arch.n_free_mmu_pages' in loop, it will
hinders us to apply kvm_mmu_prepare_zap_page() and kvm_mmu_commit_zap_page()
since kvm_mmu_prepare_zap_page() not free sp.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Using kvm_mmu_prepare_zap_page() and kvm_mmu_commit_zap_page() to
split kvm_mmu_zap_page() function, then we can:
- traverse hlist safely
- easily to gather remote tlb flush which occurs during page zapped
Those feature can be used in the later patches
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In kvm_mmu_unprotect_page(), the invalid sp can be skipped
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
According to SDM, we need check whether single-context INVVPID type is supported
before issuing invvpid instruction.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Should use linux/uaccess.h instead of asm/uaccess.h
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The vmexit handler returns KVM_EXIT_UNKNOWN since there is no handler
for vmentry failures. This intercepts vmentry failures and returns
KVM_FAIL_ENTRY to userspace instead.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There's no need to calculate quadrant if tdp is enabled.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Memory allocation may fail. Propagate such errors.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Must set VCPU register to be the guest notion of EFER even if that
setting is not valid on hardware. This was masked by the set in
set_efer until 7657fd5ace88e8092f5f3a84117e093d7b893f26 broke that.
Fix is simply to set the VCPU register before stripping bits.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In Documentation/kvm/mmu.txt:
gfn:
Either the guest page table containing the translations shadowed by this
page, or the base page frame for linear translations. See role.direct.
But in function FNAME(fetch)(), sp->gfn is incorrect when one of following
situations occurred:
1) guest is 32bit paging and the guest PDE maps a 4-MByte page
(backed by 4k host pages), FNAME(fetch)() miss handling the quadrant.
And if guest use pse-36, "table_gfn = gpte_to_gfn(gw->ptes[level - delta]);"
is incorrect.
2) guest is long mode paging and the guest PDPTE maps a 1-GByte page
(backed by 4k or 2M host pages).
So we fix it to suit to the document and suit to the code which
requires sp->gfn correct when sp->role.direct=1.
We use the goal mapping gfn(gw->gfn) to calculate the base page frame
for linear translations, it is simple and easy to be understood.
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In Document/kvm/mmu.txt:
gfn:
Either the guest page table containing the translations shadowed by this
page, or the base page frame for linear translations. See role.direct.
But in __direct_map(), the base gfn calculation is incorrect,
it does not calculate correctly when level=3 or 4.
Fix by using PT64_LVL_ADDR_MASK() which accounts for all levels correctly.
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When sp->role.direct is set, sp->gfns does not contain any essential
information, leaf sptes reachable from this sp are for a continuous
guest physical memory range (a linear range).
So sp->gfns[i] (if it was set) equals to sp->gfn + i. (PT_PAGE_TABLE_LEVEL)
Obviously, it is not essential information, we can calculate it when need.
It means we don't need sp->gfns when sp->role.direct=1,
Thus we can save one page usage for every kvm_mmu_page.
Note:
Access to sp->gfns must be wrapped by kvm_mmu_page_get_gfn()
or kvm_mmu_page_set_gfn().
It is only exposed in FNAME(sync_page).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
For the sake of completeness, this patch adds a symbolic
constant for VMX exit reason 0x21 (invalid guest state).
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Allow more page become asynchronous at getting sp time, if need create new
shadow page for gfn but it not allow unsync(level > 1), we should unsync all
gfn's unsync page
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In current code, shadow page can become asynchronous only if one
shadow page for a gfn, this rule is too strict, in fact, we can
let all last mapping page(i.e, it's the pte page) become unsync,
and sync them at invlpg or flush tlb time.
This patch allow more page become asynchronous at gfn mapping time
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
On SVM interrupts are injected by svm_set_irq() not svm_inject_irq().
The later is used only to wait for irq window.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Only unsync pages need updated at invlpg time since other shadow
pages are write-protected
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Two cases maybe happen in kvm_mmu_get_page() function:
- one case is, the goal sp is already in cache, if the sp is unsync,
we only need update it to assure this mapping is valid, but not
mark it sync and not write-protect sp->gfn since it not broke unsync
rule(one shadow page for a gfn)
- another case is, the goal sp not existed, we need create a new sp
for gfn, i.e, gfn (may)has another shadow page, to keep unsync rule,
we should sync(mark sync and write-protect) gfn's unsync shadow page.
After enabling multiple unsync shadows, we sync those shadow pages
only when the new sp not allow to become unsync(also for the unsyc
rule, the new rule is: allow all pte page become unsync)
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Split kvm_sync_page() into kvm_sync_page() and kvm_sync_page_transient()
to clarify the code address Avi's suggestion
kvm_sync_page_transient() function only update shadow page but not mark
it sync and not write protect sp->gfn. it will be used by later patch
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We can avoid unnecessary fpu load when userspace process
didn't use FPU frequently.
Derived from Avi's idea.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Now that all arch specific ioctls have centralized locking, it is easy to
move it to the central dispatcher.
Signed-off-by: Avi Kivity <avi@redhat.com>
All vcpu ioctls need to be locked, so instead of locking each one specifically
we lock at the generic dispatcher.
This patch only updates generic ioctls and leaves arch specific ioctls alone.
Signed-off-by: Avi Kivity <avi@redhat.com>
Remove rmap before clear spte otherwise it will trigger BUG_ON() in
some functions such as rmap_write_protect().
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Only modifying some bits of CR0/CR4 needs paging mode switch.
Modify EFER.NXE bit would result in reserved bit updates.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
mmu.free() already set root_hpa to INVALID_PAGE, no need to do it again in the
destory_kvm_mmu().
kvm_x86_ops->set_cr4() and set_efer() already assign cr4/efer to
vcpu->arch.cr4/efer, no need to do it again later.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This adds missing decoder flags for sub instructions (opcodes 0x2c - 0x2d)
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This adds test acc, imm instruction to the x86 emulator
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
SDM suggests VMXON should be called before VMPTRLD, and VMXOFF
should be called after doing VMCLEAR.
Therefore in vmm coexistence case, we should firstly call VMXON
before any VMCS operation, and then call VMXOFF after the
operation is done.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Originally VMCLEAR/VMPTRLD is called on vcpu migration. To
support hosted VMM coexistance, VMCLEAR is executed on vcpu
schedule out, and VMPTRLD is executed on vcpu schedule in.
This could also eliminate the IPI when doing VMCLEAR.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Do some preparations for vmm coexistence support.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Define vmcs_load() and kvm_cpu_vmxon() to avoid direct call of asm
code. Also move VMXE bit operation out of kvm_cpu_vmxoff().
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We drop the mmu lock between freeing memory and allocating the roots; this
allows some other vcpu to sneak in and allocate memory.
While the race is benign (resulting only in temporary overallocation, not oom)
it is simple and easy to fix by moving the freeing close to the allocation.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Do not kill VM when instruction emulation fails. Inject #UD and report
failure to userspace instead. Userspace may choose to reenter guest if
vcpu is in userspace (cpl == 3) in which case guest OS will kill
offending process and continue running.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently, kvm_mmu_zap_page() returning the number of freed children sp.
This might confuse the caller, because caller don't know the actual freed
number. Let's make kvm_mmu_zap_page() return the number of pages it actually
freed.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Sometime cmpxchg_gpte doesn't modify gpte, in such case, don't mark
page table page as dirty.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch enables setting of efer bit 13 which is allowed
in all SVM capable processors. This is necessary for the
SLES11 version of Xen 4.0 to boot with nested svm.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds a function to dump the vmcb into the kernel
log and calls it after a failed vmrun to ease debugging.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
KVM_REQ_KICK poisons vcpu->requests by having a bit set during normal
operation. This causes the fast path check for a clear vcpu->requests
to fail all the time, triggering tons of atomic operations.
Fix by replacing KVM_REQ_KICK with a vcpu->guest_mode atomic.
Signed-off-by: Avi Kivity <avi@redhat.com>
Return exception as a result of instruction emulation and handle
injection in KVM code.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
emulate_sysexit() should use shadowed registers copy instead of
looking into vcpu state directly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Return new RIP as part of instruction emulation result instead of
updating KVM's RIP from x86 emulator code.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Return error to x86 emulator instead of injection exception behind its back.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It is not called directly outside of the file it's defined in anymore.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently emulator returns -1 when emulation failed or IO is needed.
Caller tries to guess whether emulation failed by looking at other
variables. Make it easier for caller to recognise error condition by
always returning -1 in case of failure. For this new emulator
internal return value X86EMUL_IO_NEEDED is introduced. It is used to
distinguish between error condition (which returns X86EMUL_UNHANDLEABLE)
and condition that requires IO exit to userspace to continue emulation.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fill in run->mmio details in (read|write)_emulated function just like
pio does. There is no point in filling only vcpu fields there just to
copy them into vcpu->run a little bit later.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently X86EMUL_PROPAGATE_FAULT, X86EMUL_RETRY_INSTR and
X86EMUL_CMPXCHG_FAILED have the same value so caller cannot
distinguish why function such as emulator_cmpxchg_emulated()
(which can return both X86EMUL_PROPAGATE_FAULT and
X86EMUL_CMPXCHG_FAILED) failed.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Make (get|set)_dr() callback return error if it fails instead of
injecting exception behind emulator's back.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Make set_cr() callback return error if it fails instead of injecting #GP
behind emulator's back.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use callbacks from x86_emulate_ops to access segments instead of calling
into kvm directly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
On VMX it is expensive to call get_cached_descriptor() just to get segment
base since multiple vmcs_reads are done instead of only one. Introduce
new call back get_cached_segment_base() for efficiency.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add (set|get)_msr callbacks to x86_emulate_ops instead of calling
them directly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add (set|get)_dr callbacks to x86_emulate_ops instead of calling
them directly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
ljmp/lcall instruction operand contains address and segment.
It can be 10 bytes long. Currently we decode it as two different
operands. Fix it by introducing new kind of operand that can hold
entire far address.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Dst operand is already initialized during decoding stage. No need to
reinitialize.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This instruction does not need generic decoding for its dst operand.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce read cache which is needed for instruction that require more
then one exit to userspace. After returning from userspace the instruction
will be re-executed with cached read value.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
cr0.ts may change between entries, so we copy cr0 to HOST_CR0 before each
entry. That is slow, so instead, set HOST_CR0 to have TS set unconditionally
(which is a safe value), and issue a clts() just before exiting vcpu context
if the task indeed owns the fpu.
Saves ~50 cycles/exit.
Signed-off-by: Avi Kivity <avi@redhat.com>
Although we always allocate a new dirty bitmap in x86's get_dirty_log(),
it is only used as a zero-source of copy_to_user() and freed right after
that when memslot is clean. This patch uses clear_user() instead of doing
this unnecessary zero-source allocation.
Performance improvement: as we can expect easily, the time needed to
allocate a bitmap is completely reduced. In my test, the improved ioctl
was about 4 to 10 times faster than the original one for clean slots.
Furthermore, reducing memory allocations and copies will produce good
effects to caches too.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
In common cases, guest SRAO MCE will cause corresponding poisoned page
be un-mapped and SIGBUS be sent to QEMU-KVM, then QEMU-KVM will relay
the MCE to guest OS.
But it is reported that if the poisoned page is accessed in guest
after unmapping and before MCE is relayed to guest OS, userspace will
be killed.
The reason is as follows. Because poisoned page has been un-mapped,
guest access will cause guest exit and kvm_mmu_page_fault will be
called. kvm_mmu_page_fault can not get the poisoned page for fault
address, so kernel and user space MMIO processing is tried in turn. In
user MMIO processing, poisoned page is accessed again, then userspace
is killed by force_sig_info.
To fix the bug, kvm_mmu_page_fault send HWPOISON signal to QEMU-KVM
and do not try kernel and user space MMIO processing for poisoned
page.
[xiao: fix warning introduced by avi]
Reported-by: Max Asbock <masbock@linux.vnet.ibm.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fix uninitialized uvhub_mask:
- An unitialized bit map variable was causing initialization of
non-existant hubs (this one causes boot panics).
- And the bit map was too small for large machines. This patch
makes it dynamic in size.
- Fix the case where socket 0 has no enabled cpu's. Don't assume
every hub has a socket 0.
- uv_init_per_cpu() should be __init.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org> # for .35.x
LKML-Reference: <E1Oeuyt-0004XS-0y@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The arguments passed to OFW shouldn't be modified; update the 'args'
argument of olpc_ofw to reflect this. This saves us some later
casting away of consts.
Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20100628220029.1555ac24@debian>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Unconditionally printing EC debug messages was helpful when we were actually
debugging the EC, but during normal operation it can get pretty annoying.
Using pr_debug allows us finer-grained control.
Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20100616231928.16b539f0@dev.queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add package level thermal and power limit feature support.
The two MSRs and features are new starting with Intel's Sandy Bridge processor.
Please check Intel 64 and IA-32 Architectures SDMV Vol 3A 14.5.6 Power Limit
Notification and 14.6 Package Level Thermal Management.
This patch also fixes a bug which defines reverse THERM_INT_LOW_ENABLE bit and
THERM_INT_HIGH_ENABLE bit.
[ hpa: fixed up against current tip:x86/cpu ]
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
LKML-Reference: <1280448826-12004-2-git-send-email-fenghua.yu@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Use the stop machine context rather than IPI's to rendezvous all the cpus for
MTRR initialization that happens during cpu bringup or for MTRR modifications
during runtime.
This avoids deadlock scenario (reported by Prarit) like:
cpu A holds a read_lock (tasklist_lock for example) with irqs enabled
cpu B waits for the same lock with irqs disabled using write_lock_irq
cpu C doing set_mtrr() (during AP bringup for example), which will try to
rendezvous all the cpus using IPI's
This will result in C and A come to the rendezvous point and waiting
for B. B is stuck forever waiting for the lock and thus not
reaching the rendezvous point.
Using stop cpu (run in the process context of per cpu based keventd) to do
this rendezvous, avoids this deadlock scenario.
Also make sure all the cpu's are in the rendezvous handler before we proceed
with the local_irq_save() on each cpu. This lock step disabling irqs on all
the cpus will avoid other deadlock scenarios (for example involving
with the blocking smp_call_function's etc).
[ This problem is very old. Marking -stable only for 2.6.35 as the
stop_one_cpu_nowait() API is present only in 2.6.35. Any older
kernel interested in this fix need to do some more work in backporting
this patch. ]
Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1280515602.2682.10.camel@sbsiddha-MOBL3.sc.intel.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Cc: stable@kernel.org [2.6.35]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
commit 2ca1af9aa3285c6a5f103ed31ad09f7399fc65d7 "PCI: MSI: Remove
unsafe and unnecessary hardware access" changed read_msi_msg_desc() to
return the last MSI message written instead of reading it from the
device, since it may be called while the device is in a reduced
power state.
However, the pSeries platform code really does need to read messages
from the device, since they are initially written by firmware.
Therefore:
- Restore the previous behaviour of read_msi_msg_desc()
- Add new functions get_cached_msi_msg{,_desc}() which return the
last MSI message written
- Use the new functions where appropriate
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This DMI quirk turns on "pci=use_crs" for the ALiveSATA2-GLAN because
amd_bus.c doesn't handle this system correctly.
The system has a single HyperTransport I/O chain, but has two PCI host
bridges to buses 00 and 80. amd_bus.c learns the MMIO range associated
with buses 00-ff and that this range is routed to the HT chain hosted at
node 0, link 0:
bus: [00, ff] on node 0 link 0
bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
This includes the address space for both bus 00 and bus 80, and amd_bus.c
assumes it's all routed to bus 00.
We find device 80:01.0, which BIOS left in the middle of that space, but
we don't find a bridge from bus 00 to bus 80, so we conclude that 80:01.0
is unreachable from bus 00, and we move it from the original, working,
address to something outside the bus 00 aperture, which does not work:
pci 0000:80:01.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit]
The BIOS told us everything we need to know to handle this correctly,
so we're better off if we just pay attention, which lets us leave the
80:01.0 device at the original, working, address:
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff37ffff]
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
pci_root PNP0A08:00: host bridge window [mem 0xfebfc000-0xfebfffff]
This was a regression between 2.6.33 and 2.6.34. In 2.6.33, amd_bus.c
was used only when we found multiple HT chains. 3e3da00c01, which
enabled amd_bus.c even on systems with a single HT chain, caused this
failure.
This quirk was written by Graham. If we ever enable "pci=use_crs" for
machines from 2006 or earlir, this quirk should be removed.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16007
Cc: stable@kernel.org
Reported-by: Graham Ramsey <ramsey.graham@ntlworld.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The Linux kernel assigns BARs that a BIOS did not assign, most likely
to handle broken BIOSes that didn't enumerate the devices correctly.
On UV the BIOS purposely doesn't assign I/O BARs for certain devices/
drivers we know don't use them (examples, LSI SAS, Qlogic FC, ...).
We purposely don't assign these I/O BARs because I/O Space is a very
limited resource. There is only 64k of I/O Space, and in a PCIe
topology that space gets divided up into 4k chucks (this is due to
the fact that a pci-to-pci bridge's I/O decoder is aligned at 4k)...
Thus a system can have at most 16 cards with I/O BARs: (64k / 4k = 16)
SGI needs to scale to >16 devices with I/O BARs. So by not assigning
I/O BARs on devices we know don't use them, we can do that (iff the
kernel doesn't go and assign these BARs that the BIOS purposely didn't
assign).
This patch will not assign a resource to a device BAR if that BAR was
not assigned by the BIOS, and the kernel cmdline option 'pci=nobar'
was specified. This patch is closely modeled after the 'pci=norom'
option that currently exists in the tree.
Signed-off-by: Mike Habeck <habeck@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
pcibios_scan_specific_bus calls pci_scan_bus_on_node which is
__devinit. Mark pcibios_scan_specific_bus __devinit as well since
all users are now __init or __devinit.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch introduce a CONFIG_XEN_PVHVM compile time option to
enable/disable Xen PV on HVM support.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The following two commits fixed a problem that x86 ioremap() doesn't handle
physical address higher than 32-bit properly in X86_32 PAE mode.
ffa71f33a8 (x86, ioremap: Fix incorrect
physical address handling in PAE mode)
35be1b716a (x86, ioremap: Fix normal
ram range check)
But these fixes are not enough, since pat_pagerange_is_ram() in PAT code
also has a same problem. This patch fixes it.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
LKML-Reference: <4C47DDCF.80300@jp.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
HW breakpoints events stopped working correctly with kgdb
as a result of commit: 018cbffe68
(Merge commit 'v2.6.33' into perf/core).
The regression occurred because the behavior changed for setting
NOTIFY_STOP as the return value to the die notifier if the breakpoint
was known to the HW breakpoint API. Because kgdb is using the HW
breakpoint API to register HW breakpoints slots, it must also now
implement the overflow_handler call back else kgdb does not get to see
the events from the die notifier.
The kgdb_ll_trap function will be changed to be general purpose code
which can allow an easy way to implement the hw_breakpoint API
overflow call back.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Dongdong Deng <dongdong.deng@windriver.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
We have two functions for doing exactly the same thing -- emulating
cmpxchg8b on 486 and older hardware -- with different calling
conventions, and yet doing the same thing. Drop the C version and use
the assembly version, via alternatives, for both the local and
non-local versions of cmpxchg8b.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <AANLkTikAmaDPji-TVDarmG1yD=fwbffcsmEU=YEuP+8r@mail.gmail.com>
Move cmpxchg emulation code from arch/x86/kernel/cpu (which is
otherwise CPU identification) to arch/x86/lib, where other emulation
code lives already.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <AANLkTikAmaDPji-TVDarmG1yD=fwbffcsmEU=YEuP+8r@mail.gmail.com>
Exprot the AMD errata definitions, since they are needed by kvm_amd.ko
if that is built as a module. Doing "make allmodconfig" during
testing would have caught this.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
LKML-Reference: <1280336972-865982-1-git-send-email-hans.rosenfeld@amd.com>
Remove the __xg() hack to create a memory barrier near xchg and
cmpxchg; it has been there since 1.3.11 but should not be necessary
with "asm volatile" and a "memory" clobber, neither of which were
there in the original implementation.
However, we *should* make this a volatile reference.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <AANLkTikAmaDPji-TVDarmG1yD=fwbffcsmEU=YEuP+8r@mail.gmail.com>
Use the AMD errata checking framework instead of open-coding the test.
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
LKML-Reference: <1280336972-865982-3-git-send-email-hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Remove check_c1e_idle() and use the new AMD errata checking framework
instead.
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
LKML-Reference: <1280336972-865982-2-git-send-email-hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Errata are defined using the AMD_LEGACY_ERRATUM() or AMD_OSVW_ERRATUM()
macros. The latter is intended for newer errata that have an OSVW id
assigned, which it takes as first argument. Both take a variable number
of family-specific model-stepping ranges created by AMD_MODEL_RANGE().
Iff an erratum has an OSVW id, OSVW is available on the CPU, and the
OSVW id is known to the hardware, it is used to determine whether an
erratum is present. Otherwise, the model-stepping ranges are matched
against the current CPU to find out whether the erratum applies.
For certain special errata, the code using this framework might have to
conduct further checks to make sure an erratum is really (not) present.
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
LKML-Reference: <1280336972-865982-1-git-send-email-hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch simply declares the new sys_fanotify_mark syscall
int fanotify_mark(int fanotify_fd, unsigned int flags, u64_mask,
int dfd const char *pathname)
Signed-off-by: Eric Paris <eparis@redhat.com>
This patch defines a new syscall fanotify_init() of the form:
int sys_fanotify_init(unsigned int flags, unsigned int event_f_flags,
unsigned int priority)
This syscall is used to create and fanotify group. This is very similar to
the inotify_init() syscall.
Signed-off-by: Eric Paris <eparis@redhat.com>
Don't quote $nm in the script for checking the vdso for external
references. Doing so breaks multiword constructs, like using
CROSS_COMPILE='ccache '.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <20100728134252.2e4c27cf.sfr@canb.auug.org.au>
Clean up and simplify set_64bit(). This code is quite old (1.3.11)
and contains a fair bit of auxilliary machinery that current versions
of gcc handle just fine automatically. Worse, the auxilliary
machinery can actually cause an unnecessary spill to memory.
Furthermore, the loading of the old value inside the loop in the
32-bit case is unnecessary: if the value doesn't match, the CMPXCHG8B
instruction will already have loaded the "new previous" value for us.
Clean up the comment, too, and remove page references to obsolete
versions of the Intel SDM.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <tip-*@vger.kernel.org>
gcc 4.4.4 will complain if you use a .discard section for both text and
data ("causes a section type conflict"). Add support for ".discard.*"
sections, and use .discard.text for a dummy function in the x86
RESERVE_BRK() macro.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
xchg() and cmpxchg() modify their memory operands, not merely read
them. For some versions of gcc the "memory" clobber has apparently
dealt with the situation, but not for all.
Originally-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Glauber Costa <glommer@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Peter Palfrader <peter@palfrader.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Zachary Amsden <zamsden@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <4C4F7277.8050306@zytor.com>
