There was one place where we weren't locking CurrentMid, and although
likely to be safe since even without the lock since it is during
negotiate protocol, it is more consistent to lock it in this last remaining
place, and avoids confusing Coverity warning.
Addresses-Coverity: 1486665 ("Data race condition")
Signed-off-by: Steve French <stfrench@microsoft.com>
According to the investigation performed by Jacob Shivers at Red Hat,
cifs_lookup and cifs_readdir leak EAGAIN when the user session is
deleted on the server. Fix this issue by implementing a retry with
limits, as is implemented in cifs_revalidate_dentry_attr.
Reproducer based on the work by Jacob Shivers:
~~~
$ cat readdir-cifs-test.sh
#!/bin/bash
# Install and configure powershell and sshd on the windows
# server as descibed in
# https://docs.microsoft.com/en-us/windows-server/administration/openssh/openssh_overview
# This script uses expect(1)
USER=dude
SERVER=192.168.0.2
RPATH=root
PASS='password'
function debug_funcs {
for line in $@ ; do
echo "func $line +p" > /sys/kernel/debug/dynamic_debug/control
done
}
function setup {
echo 1 > /proc/fs/cifs/cifsFYI
debug_funcs wait_for_compound_request \
smb2_query_dir_first cifs_readdir \
compound_send_recv cifs_reconnect_tcon \
generic_ip_connect cifs_reconnect \
smb2_reconnect_server smb2_reconnect \
cifs_readv_from_socket cifs_readv_receive
tcpdump -i eth0 -w cifs.pcap host 192.168.2.182 & sleep 5
dmesg -C
}
function test_call {
if [[ $1 == 1 ]] ; then
tracer="strace -tt -f -s 4096 -o trace-$(date -Iseconds).txt"
fi
# Change the command here to anything appropriate
$tracer ls $2 > /dev/null
res=$?
if [[ $1 == 1 ]] ; then
if [[ $res == 0 ]] ; then
1>&2 echo success
else
1>&2 echo "failure ($res)"
fi
fi
}
mountpoint /mnt > /dev/null || mount -t cifs -o username=$USER,pass=$PASS //$SERVER/$RPATH /mnt
test_call 0 /mnt/
/usr/bin/expect << EOF
set timeout 60
spawn ssh $USER@$SERVER
expect "yes/no" {
send "yes\r"
expect "*?assword" { send "$PASS\r" }
} "*?assword" { send "$PASS\r" }
expect ">" { send "powershell close-smbsession -force\r" }
expect ">" { send "exit\r" }
expect eof
EOF
sysctl -w vm.drop_caches=2 > /dev/null
sysctl -w vm.drop_caches=2 > /dev/null
setup
test_call 1 /mnt/
~~~
Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1866684
We don't have a real fallocate in the SMB2 protocol so we used to emulate fallocate
by simply switching the file to become non-sparse. But as that could potantially consume
a lot more data than we intended to fallocate (large sparse file and fallocating a thin
slice in the middle) we would only do this IFF the fallocate request was for virtually
the entire file.
This patch improves this and starts allowing us to fallocate smaller chunks of a file by
overwriting the region with 0, for the parts that are unallocated.
The method used is to first query the server for FSCTL_QUERY_ALLOCATED_RANGES to find what
is unallocated in the fallocate range and then to only overwrite-with-zero the unallocated
ranges to fill in the holes.
As overwriting-with-zero is different from just allocating blocks, and potentially much
more expensive, we limit this to only allow fallocate ranges up to 1Mb in size.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
When smb2 lease parameter is disabled on server. Server grants
batch oplock instead of RHW lease by default on open, inode page cache
needs to be zapped immediatley upon close as cache is not valid.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When using smb2_copychunk_range() for large ranges we will
run through several iterations of a loop calling SMB2_ioctl()
but never actually free the returned buffer except for the final
iteration.
This leads to memory leaks everytime a large copychunk is requested.
Fixes: 9bf0c9cd43 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files")
Cc: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For servers which don't support copy_range (SMB3 CopyChunk), the
logging of:
CIFS: VFS: \\server\share refcpy ioctl error -95 getting resume key
can fill the client logs and make debugging real problems more
difficult. Change the -EOPNOTSUPP on copy_range to a "warn once"
Signed-off-by: Steve French <stfrench@microsoft.com>
pfid is being set to tcon->crfid.fid and they are copied in each other
multiple times. Remove the memcopy between same pointers - memory
locations.
Addresses-Coverity: ("Overlapped copy")
Fixes: 9e81e8ff74 ("cifs: return cached_fid from open_shroot")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If smb3_notify() is called at mount point of CIFS, build_path_from_dentry()
returns the pointer to kmalloc-ed memory with terminating zero (this is
empty FileName to be passed to SMB2 CREATE request). This pointer is assigned
to the `path` variable.
Then `path + 1` (to skip first backslash symbol) is passed to
cifs_convert_path_to_utf16(). This is incorrect for empty path and causes
out-of-bound memory access.
Get rid of this "increase by one". cifs_convert_path_to_utf16() already
contains the check for leading backslash in the path.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212693
CC: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
* rqst[1,2,3] is allocated in vars
* each rqst->rq_iov is also allocated in vars or using pooled memory
SMB2_open_free, SMB2_ioctl_free, SMB2_query_info_free are iterating on
each rqst after vars has been freed (use-after-free), and they are
freeing the kvec a second time (double-free).
How to trigger:
* compile with KASAN
* mount a share
$ smbinfo quota /mnt/foo
Segmentation fault
$ dmesg
==================================================================
BUG: KASAN: use-after-free in SMB2_open_free+0x1c/0xa0
Read of size 8 at addr ffff888007b10c00 by task python3/1200
CPU: 2 PID: 1200 Comm: python3 Not tainted 5.12.0-rc6+ #107
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0x93/0xc2
print_address_description.constprop.0+0x18/0x130
? SMB2_open_free+0x1c/0xa0
? SMB2_open_free+0x1c/0xa0
kasan_report.cold+0x7f/0x111
? smb2_ioctl_query_info+0x240/0x990
? SMB2_open_free+0x1c/0xa0
SMB2_open_free+0x1c/0xa0
smb2_ioctl_query_info+0x2bf/0x990
? smb2_query_reparse_tag+0x600/0x600
? cifs_mapchar+0x250/0x250
? rcu_read_lock_sched_held+0x3f/0x70
? cifs_strndup_to_utf16+0x12c/0x1c0
? rwlock_bug.part.0+0x60/0x60
? rcu_read_lock_sched_held+0x3f/0x70
? cifs_convert_path_to_utf16+0xf8/0x140
? smb2_check_message+0x6f0/0x6f0
cifs_ioctl+0xf18/0x16b0
? smb2_query_reparse_tag+0x600/0x600
? cifs_readdir+0x1800/0x1800
? selinux_bprm_creds_for_exec+0x4d0/0x4d0
? do_user_addr_fault+0x30b/0x950
? __x64_sys_openat+0xce/0x140
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fdcf1f4ba87
Code: b3 66 90 48 8b 05 11 14 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 13 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffef1ce7748 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000c018cf07 RCX: 00007fdcf1f4ba87
RDX: 0000564c467c5590 RSI: 00000000c018cf07 RDI: 0000000000000003
RBP: 00007ffef1ce7770 R08: 00007ffef1ce7420 R09: 00007fdcf0e0562b
R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000004018
R13: 0000000000000001 R14: 0000000000000003 R15: 0000564c467c5590
Allocated by task 1200:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7a/0x90
smb2_ioctl_query_info+0x10e/0x990
cifs_ioctl+0xf18/0x16b0
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 1200:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xe5/0x110
slab_free_freelist_hook+0x53/0x130
kfree+0xcc/0x320
smb2_ioctl_query_info+0x2ad/0x990
cifs_ioctl+0xf18/0x16b0
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888007b10c00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 0 bytes inside of
512-byte region [ffff888007b10c00, ffff888007b10e00)
The buggy address belongs to the page:
page:0000000044e14b75 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7b10
head:0000000044e14b75 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 ffffea000015f500 0000000400000004 ffff888001042c80
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888007b10b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888007b10b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888007b10c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888007b10c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888007b10d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Emulated via server side copy and setsize for
SMB3 and later. In the future we could compound
this (and/or optionally use DUPLICATE_EXTENTS
if supported by the server).
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Emulated for SMB3 and later via server side copy
and setsize. Eventually this could be compounded.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
and clear the timestamp when we receive a lease break.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Needed for subsequent patches in the directory caching
series.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We need to hold both a reference for the root/superblock as well as the directory that we
are caching. We need to drop these references before we call kill_anon_sb().
At this point, the root and the cached dentries are always the same but this will change
once we start caching other directories as well.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
And use this to only allow to take out a shared handle once the mount has completed and the
sb becomes available.
This will become important in follow up patches where we will start holding a reference to the
directory dentry for the shared handle during the lifetime of the handle.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
These functions will eventually be used to cache any directory, not just the root
so change the names.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move the check for the directory path into the open_shroot() function
but still fail for any non-root directories.
This is preparation for later when we will start using the cache also
for other directories than the root.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
instead of doing it in the callsites for open_shroot.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
build_path_from_dentry() open-codes dentry_path_raw(). The reason
we can't use dentry_path_raw() in there (and postprocess the
result as needed) is that the callers of build_path_from_dentry()
expect that the object to be freed on cleanup and the string to
be used are at the same address. That's painful, since the path
is naturally built end-to-beginning - we start at the leaf and
go through the ancestors, accumulating the pathname.
Life would be easier if we left the buffer allocation to callers.
It wouldn't be exact-sized buffer, but none of the callers keep
the result for long - it's always freed before the caller returns.
So there's no need to do exact-sized allocation; better use
__getname()/__putname(), same as we do for pathname arguments
of syscalls. What's more, there's no need to do allocation under
spinlocks, so GFP_ATOMIC is not needed.
Next patch will replace the open-coded dentry_path_raw() (in
build_path_from_dentry_optional_prefix()) with calling the real
thing. This patch only introduces wrappers for allocating/freeing
the buffers and switches to new calling conventions:
build_path_from_dentry(dentry, buf)
expects buf to be address of a page-sized object or NULL,
return value is a pathname built inside that buffer on success,
ERR_PTR(-ENOMEM) if buf is NULL and ERR_PTR(-ENAMETOOLONG) if
the pathname won't fit into page. Note that we don't need to
check for failure when allocating the buffer in the caller -
build_path_from_dentry() will do the right thing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped. Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For AES256 encryption (GCM and CCM), we need to adjust the size of a few
fields to 32 bytes instead of 16 to accommodate the larger keys.
Also, the L value supplied to the key generator needs to be changed from
to 256 when these algorithms are used.
Keeping the ioctl struct for dumping keys of the same size for now.
Will send out a different patch for that one.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Steve French <stfrench@microsoft.com>
In case of interrupted syscalls, prevent sending CLOSE commands for
compound CREATE+CLOSE requests by introducing an
CIFS_CP_CREATE_CLOSE_OP flag to indicate lower layers that it should
not send a CLOSE command to the MIDs corresponding the compound
CREATE+CLOSE request.
A simple reproducer:
#!/bin/bash
mount //server/share /mnt -o username=foo,password=***
tc qdisc add dev eth0 root netem delay 450ms
stat -f /mnt &>/dev/null & pid=$!
sleep 0.01
kill $pid
tc qdisc del dev eth0 root
umount /mnt
Before patch:
...
6 0.256893470 192.168.122.2 → 192.168.122.15 SMB2 402 Create Request File: ;GetInfo Request FS_INFO/FileFsFullSizeInformation;Close Request
7 0.257144491 192.168.122.15 → 192.168.122.2 SMB2 498 Create Response File: ;GetInfo Response;Close Response
9 0.260798209 192.168.122.2 → 192.168.122.15 SMB2 146 Close Request File:
10 0.260841089 192.168.122.15 → 192.168.122.2 SMB2 130 Close Response, Error: STATUS_FILE_CLOSED
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Trivial change to clarify code in smb2_is_network_name_deleted
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When server returns error STATUS_NETWORK_NAME_DELETED, TCON
must be marked for reconnect. So, subsequent IO does the tree
connect again.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Introduced a new field conn_id in TCP_Server_Info structure.
This is a non-persistent unique identifier maintained by the client
for a connection to a file server. For this, a global counter named
tcpSesNextId is maintained. On allocating a new TCP_Server_Info,
this counter is incremented and assigned.
Changed the dynamic tracepoints related to reconnects and
crediting to be more informative (with conn_id printed).
Debugging a crediting issue helped me understand the
important things to print here.
Always call dynamic tracepoints outside the scope of spinlocks.
To do this, copy out the credits and in_flight fields of the
server struct before dropping the lock.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We used to share the CIFS_NEG_OP flag between negotiate and
session authentication. There was an assumption in the code that
CIFS_NEG_OP is used by negotiate only. So introcuded CIFS_SESS_OP
and used it for session setup optypes.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix passing of the additional security info via version
operations. Force new open when getting SACL and avoid
reuse of files that were previously open without
sufficient privileges to access SACLs.
Signed-off-by: Boris Protopopov <pboris@amazon.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add SYSTEM_SECURITY access flag and use with smb2 when opening
files for getting/setting SACLs. Add "system.cifs_ntsd_full"
extended attribute to allow user-space access to the functionality.
Avoid multiple server calls when setting owner, DACL, and SACL.
Signed-off-by: Boris Protopopov <pboris@amazon.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is at least one suspected bug in crediting changes in cifs.ko
which has come up a few times in the discussions and in a customer
case.
This change adds tracepoints to the code which modifies the server
credit values in any way. The goal is to be able to track the changes
to the credit values of the session to be able to catch when there is
a crediting bug.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Harmonize and change all such variables to 'ctx', where possible.
No changes to actual logic.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mounts to Azure cause an unneeded warning message in dmesg
"CIFS: VFS: parse_server_interfaces: incomplete interface info"
Azure rounds up the size (by 8 additional bytes, to a
16 byte boundary) of the structure returned on the query
of the server interfaces at mount time. This is permissible
even though different than other servers so do not log a warning
if query network interfaces response is only rounded up by 8
bytes or fewer.
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For an operation compounded with an SMB2 CREATE request, client must set
COMPOUND_FID(0xFFFFFFFFFFFFFFFF) to FileID field of smb2 ioctl.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Fixes: 2e4564b31b ("smb3: add support stat of WSL reparse points for special file types")
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mid callback needs to be called only when valid data is
read into pages.
These patches address a problem found during decryption offload:
CIFS: VFS: trying to dequeue a deleted mid
that could cause a refcount use after free:
Workqueue: smb3decryptd smb2_decrypt_offload [cifs]
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> #5.4+
Signed-off-by: Steve French <stfrench@microsoft.com>
When reconnect happens Mid queue can be corrupted when both
demultiplex and offload thread try to dequeue the MID from the
pending list.
These patches address a problem found during decryption offload:
CIFS: VFS: trying to dequeue a deleted mid
that could cause a refcount use after free:
Workqueue: smb3decryptd smb2_decrypt_offload [cifs]
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> #5.4+
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix two unused variables in commit
"add support for stat of WSL reparse points for special file types"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting with modefromsid mount option, it was possible to
get the error on stat of a fifo or char or block device:
"cannot stat <filename>: Operation not supported"
Special devices can be stored as reparse points by some servers
(e.g. Windows NFS server and when using the SMB3.1.1 POSIX
Extensions) but when the modefromsid mount option is used
the client attempts to get the ACL for the file which requires
opening with OPEN_REPARSE_POINT create option.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
TCP server info field server->total_read is modified in parallel by
demultiplex thread and decrypt offload worker thread. server->total_read
is used in calculation to discard the remaining data of PDU which is
not read into memory.
Because of parallel modification, server->total_read can get corrupted
and can result in discarding the valid data of next PDU.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> #5.4+
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3 crediting is used for flow control, and it can be useful to
trace for problem determination how many credits were acquired
and for which operation.
Here is an example ("trace-cmd record -e *add_credits"):
cifsd-9522 [010] .... 5995.202712: smb3_add_credits:
server=localhost current_mid=0x12 credits=373 credits_to_add=10
cifsd-9522 [010] .... 5995.204040: smb3_add_credits:
server=localhost current_mid=0x15 credits=400 credits_to_add=30
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In crypt_message, when smb2_get_enc_key returns error, we need to
return the error back to the caller. If not, we end up processing
the message further, causing a kernel oops due to unwarranted access
of memory.
Call Trace:
smb3_receive_transform+0x120/0x870 [cifs]
cifs_demultiplex_thread+0xb53/0xc20 [cifs]
? cifs_handle_standard+0x190/0x190 [cifs]
kthread+0x116/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x1f/0x30
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that 256 bit encryption can be negotiated, update
names of the nonces to match the updated official protocol
documentation (e.g. AES_GCM_NONCE instead of AES_128GCM_NONCE)
since they apply to both 128 bit and 256 bit encryption.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Currently STATUS_IO_TIMEOUT is not treated as retriable error.
It is currently mapped to ETIMEDOUT and returned to userspace
for most system calls. STATUS_IO_TIMEOUT is returned by server
in case of unavailability or throttling errors.
This patch will map the STATUS_IO_TIMEOUT to EAGAIN, so that it
can be retried. Also, added a check to drop the connection to
not overload the server in case of ongoing unavailability.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cleanup patch for followon to cache additional information for the root directory
when directory lease held.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On setxattr() syscall path due to an apprent typo the size of a dynamically
allocated memory chunk for storing struct smb2_file_full_ea_info object is
computed incorrectly, to be more precise the first addend is the size of
a pointer instead of the wanted object size. Coincidentally it makes no
difference on 64-bit platforms, however on 32-bit targets the following
memcpy() writes 4 bytes of data outside of the dynamically allocated memory.
=============================================================================
BUG kmalloc-16 (Not tainted): Redzone overwritten
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc
INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201
INFO: Object 0x6f171df3 @offset=352 fp=0x00000000
Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69 ........snrub.fi
Redzone 79e69a6f: 73 68 32 0a sh2.
Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
CPU: 0 PID: 8196 Comm: attr Tainted: G B 5.9.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
dump_stack+0x54/0x6e
print_trailer+0x12c/0x134
check_bytes_and_report.cold+0x3e/0x69
check_object+0x18c/0x250
free_debug_processing+0xfe/0x230
__slab_free+0x1c0/0x300
kfree+0x1d3/0x220
smb2_set_ea+0x27d/0x540
cifs_xattr_set+0x57f/0x620
__vfs_setxattr+0x4e/0x60
__vfs_setxattr_noperm+0x4e/0x100
__vfs_setxattr_locked+0xae/0xd0
vfs_setxattr+0x4e/0xe0
setxattr+0x12c/0x1a0
path_setxattr+0xa4/0xc0
__ia32_sys_lsetxattr+0x1d/0x20
__do_fast_syscall_32+0x40/0x70
do_fast_syscall_32+0x29/0x60
do_SYSENTER_32+0x15/0x20
entry_SYSENTER_32+0x9f/0xf2
Fixes: 5517554e43 ("cifs: Add support for writing attributes on SMB2+")
Signed-off-by: Vladimir Zapolskiy <vladimir@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
