Now, snd_soc_pcm_runtime supports multi cpu_dai/codec_dai.
It still has cpu_dai/codec_dai for single DAI,
and has cpu_dais/codec_dais for multi DAIs.
dais = [][][][][][][][][][][][][][][][][][]
^cpu_dais ^codec_dais
|--- num_cpus ---|--- num_codecs --|
/* for multi DAIs */
rtd->cpu_dais = &rtd->dais[0];
rtd->codec_dais = &rtd->dais[dai_link->num_cpus];
/* for single DAI */
rtd->cpu_dai = rtd->cpu_dais[0];
rtd->codec_dai = rtd->codec_dais[0];
But, these can be replaced by dais.
This patch adds asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/875zevk5va.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The system in question uses ALC285, and it uses GPIO 0x04 to control its
mute LED.
The mic mute LED can be controlled by GPIO 0x01, however the system uses
DMIC so we should use that to control mic mute LED.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200327044626.29582-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When two (or more) amplifiers are on the same link, the integrator may:
a) assign dedicated slots for each of the amplifiers.
b) provide the same configuration to all amplifiers, and rely on
additional controls/processing in the amplifier to generate different
outputs.
case a) was the initial direction for SoundWire and is required for
amplifiers with limited capabilities, but to deal with orientation or
'posture' changes it's easier to implement case b) when the amplifier
can deal with multiple channels.
This patchset suggest the use of the set_tdm_slot() API to define
which of the channels will be consumed by what amplifiers. This maps
well with SoundWire's 'ChannelEnable' registers. The notion of
slot_width is however irrelevant here and ignored, and SoundWire ports
are typically single direction, so only one of the two masks shall be
used.
Pierre-Louis Bossart (2):
ASoC: rt1308-sdw: add set_tdm_slot() support
ASoC: rt1308-sdw: use slot and rx_mask to configure stream
sound/soc/codecs/rt1308-sdw.c | 38 +++++++++++++++++++++++++++++++----
sound/soc/codecs/rt1308-sdw.h | 2 ++
2 files changed, 36 insertions(+), 4 deletions(-)
--
2.20.1
The AC'97 based PXA machines currently don't build reliably as they don't
ensure that an AC'97 bus is built, causing at least eseries_pxa_defconfig
to fail to build. Add selects to fix this.
Reported-by: KernelCI <bot@kernelci.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200326180116.21375-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap needs to be selected by users which for machine drivers that select
AC'97 CODEC drivers means that we need to also select regmap to ensure that
the CODEC driver will build if nothing else enables regmap as is likely for
such systems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200326151053.40806-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If the DAI was configured with a set_tdm_slots() call, use the information.
A platform or machine driver may configure each amplifier to extract
different bitSlots from the frame, or extract the same data and use
processing to generate the relevant output. The latter case is easier
to handle in case of orientation changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325212905.28145-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Further align HDA init sequence to the legacy non-DSP HDA driver by
calling snd_hdac_set_codec_wakeup() during the chip init sequence.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The misc clock gating (MISCBDCGE) is disabled for controller reset and
reenabled once reset is complete.
Fix the case when error happens during reset, and clock gating is
left disabled. The clock gating should be reenabled also in this case.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the VirtIO case the sof_pcm_open() function isn't called on the
host during guest streaming, which then leaves "work" structures
uninitialised. However it is then used to handle position update
messages from the DSP. Move their initialisation to immediately after
allocation of the containing structure.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use for_each_pcm_streams() to enumerate streams in sof_dai_load()
instead of doing that manually.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Improve the DSP power state logs with the state names
instead of values.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update tgl mach table with: Maxim98373 Amp and ALC5682 hp codec.
Both of the codecs are on I2S bus.
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch does the below:
1. Adds the driver data and updates quirk info for TGL
with Max98373 speaker amp and ALC5682 headset codec.
2. Added max98373 speaker related code to common file for re-use.
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add "Spk Switch" and associated widget, route to max98360a
speaker amp for power saving, also remove the speaker_amp_init()
callback with complete separated tables for max98373 and max98360a.
Signed-off-by: Bhat, Uday M <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Without the dynamic flag to allow runtime routing, the card cannot
probe on chromebooks because SOF is constantly waiting for the link.
Adding flag back to allow upstream kernels to work on rt5682 based
chromebooks since SOF can now ignore the hard coded front end.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The USB-audio driver may call snd_card_register() multiple times as
its probe function is per USB interface while some USB-audio devices
may provide multiple interfaces to assign different streams although
they belong to the same device. This works in most cases but the
registration is racy, hence it may miss the device recognition,
e.g. PA doesn't see certain devices when hotplugged.
The recent addition of the delayed registration quirk allows to sync
the registration at the last known interface, and the previous commit
added a new module option to allow the dynamic setup for that
purpose.
Now, this patch tries to find out and notifies for such devices that
require the delayed registration. It shows a message like:
Found post-registration device assignment: 1234abcd:02
If you hit this message, you can pass delayed_register module option
like:
snd_usb_audio.delayed_register=1234abcd:02
by just copying the last shown entry. If this works, it can be added
statically in the quirk list, registration_quirks[] found at the end
of sound/usb/quirks.c.
Link: https://lore.kernel.org/r/20200325103322.2508-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new option for specifying the quirk for delayed registration of
the certain device. A list of devices can be passed in a form
ID:IFACE,ID:IFACE,ID:IFACE,....
where ID is the 32bit hex number combo of vendor and device IDs and
IFACE is the interface number to trigger the register.
When a matching device is probed, the card registration is delayed
until the given interface is probed. It's needed for syncing the
registration until the last interface when multiple interfaces are
provided for the same card.
Link: https://lore.kernel.org/r/20200325103322.2508-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A slight refactoring of the registration quirk code. Now it uses the
table lookup for easy additions in future. Also the return type was
changed to bool, and got a few more comments.
Link: https://lore.kernel.org/r/20200325103322.2508-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The signed 1 bit bitfields should be unsigned, so make them unsigned.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20200325132913.110115-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent series of patches targeting broadwell boards, while enabling
SOF, changed behavior for non-SOF solutions. In essence replacing
platform 'dummy' with actual 'platform' causes redundant stream
initialization to occur during audio start. hw_params for haswell-pcm
destroys initial stream right after its creation - only to recreate it
again from proceed from there.
While harmless so far, this flow isn't right and should be corrected.
The actual need for dummy components for SSP0 link is questionable but
that issue is subject for another series.
Fixes: a40acc6bfc ("ASoC: Intel: bdw-rt5650: change cpu_dai and platform components for SOF")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325131611.545-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent series of patches targeting broadwell boards, while enabling
SOF, changed behavior for non-SOF solutions. In essence replacing
platform 'dummy' with actual 'platform' causes redundant stream
initialization to occur during audio start. hw_params for haswell-pcm
destroys initial stream right after its creation - only to recreate it
again from proceed from there.
While harmless so far, this flow isn't right and should be corrected.
The actual need for dummy components for SSP0 link is questionable but
that issue is subject for another series.
Fixes: 4865bde187 ("ASoC: Intel: bdw-rt5677: change cpu_dai and platform components for SOF")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325131611.545-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent series of patches targeting broadwell boards, while enabling
SOF, changed behavior for non-SOF solutions. In essence replacing
platform 'dummy' with actual 'platform' causes redundant stream
initialization to occur during audio start. hw_params for haswell-pcm
destroys initial stream right after its creation - only to recreate it
again from proceed from there.
While harmless so far, this flow isn't correct and should be corrected.
The actual need for dummy components for SSP0 link is questionable but
that issue is subject for another series.
Link to first message in conversation:
https://lkml.org/lkml/2020/3/18/54
Fixes: 64df6afa0d ("ASoC: Intel: broadwell: change cpu_dai and platform components for SOF")
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325131611.545-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the textual binding documentation for the AIC (AC97/I2S
Controller) of Ingenic SoCs to a YAML schema, and add the new compatible
strings in the process.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200306222931.39664-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
