Currently FMODE_CAN_ATOMIC_WRITE is set if the bdev can atomic write and
the file is open for direct IO. This does not work if the file is not
opened for direct IO, yet fcntl(O_DIRECT) is used on the fd later.
Change to check for direct IO on a per-IO basis in
generic_atomic_write_valid(). Since we want to report -EOPNOTSUPP for
non-direct IO for an atomic write, change to return an error code.
Relocate the block fops atomic write checks to the common write path, as to
catch non-direct IO.
Fixes: c34fc6f26a ("fs: Initial atomic write support")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241019125113.369994-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=waNY
-----END PGP SIGNATURE-----
Merge tag 'block-6.12-20241018' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)
- Fix for a kerneldoc warning (Keith)
- Fix a race with blk-rq-qos and wakeups (Omar)
- Cleanup of checking for always-set tag_set (SurajSonawane2415)
- Fix for a crash with CPU hotplug notifiers (Ming)
- Don't allow zero-copy ublk on unprivileged device (Ming)
- Use array_index_nospec() for CDROM (Josh)
- Remove dead code in drbd (David)
- Tweaks to elevator loading (Breno)
* tag 'block-6.12-20241018' of git://git.kernel.dk/linux:
cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed()
nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
nvme: make keep-alive synchronous operation
nvme-loop: flush off pending I/O while shutting down loop controller
nvme-pci: fix race condition between reset and nvme_dev_disable()
ublk: don't allow user copy for unprivileged device
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
nvme-multipath: defer partition scanning
blk-mq: setup queue ->tag_set before initializing hctx
elevator: Remove argument from elevator_find_get
elevator: do not request_module if elevator exists
drbd: Remove unused conn_lowest_minor
nvme: disable CC.CRIME (NVME_CC_CRIME)
nvme: delete unnecessary fallthru comment
nvmet-rdma: use sbitmap to replace rsp free list
block: Fix elevator_get_default() checking for NULL q->tag_set
nvme: tcp: avoid race between queue_lock lock and destroy
nvmet-passthru: clear EUID/NGUID/UUID while using loop target
block: fix blk_rq_map_integrity_sg kernel-doc
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
try_to_wake_up+0x5a/0x6a0
rq_qos_wake_function+0x71/0x80
__wake_up_common+0x75/0xa0
__wake_up+0x36/0x60
scale_up.part.0+0x50/0x110
wb_timer_fn+0x227/0x450
...
So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true
... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().
Fixes: 38cfb5a45e ("blk-wbt: improve waking of tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 7b815817aa ("blk-mq: add helper for checking if one CPU is mapped to specified hctx")
needs to check queue mapping via tag set in hctx's cpuhp handler.
However, q->tag_set may not be setup yet when the cpuhp handler is
enabled, then kernel oops is triggered.
Fix the issue by setup queue tag_set before initializing hctx.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rick Koch <mr.rickkoch@gmail.com>
Closes: https://lore.kernel.org/linux-block/CANa58eeNDozLaBHKPLxSAhEy__FPfJT_F71W=sEQw49UCrC9PQ@mail.gmail.com
Fixes: 7b815817aa ("blk-mq: add helper for checking if one CPU is mapped to specified hctx")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241014005115.2699642-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit e4eb37cc0f ("block: Remove elevator required features")
removed the usage of `struct request_queue` from elevator_find_get(),
but didn't removed the argument.
Remove the "struct request_queue *q" argument from elevator_find_get()
given it is useless.
Fixes: e4eb37cc0f ("block: Remove elevator required features")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20241011155615.3361143-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Whenever an I/O elevator is changed, the system attempts to load a
module for the new elevator. This occurs regardless of whether the
elevator is already loaded or built directly into the kernel. This
behavior introduces unnecessary overhead and potential issues.
This makes the operation slower, and more error-prone. For instance,
making the problem fixed by [1] visible for users that doesn't even rely
on modules being available through modules.
Do not try to load the ioscheduler if it is already visible.
This change brings two main benefits: it improves the performance of
elevator changes, and it reduces the likelihood of errors occurring
during this process.
[1] Commit e3accac1a9 ("block: Fix elv_iosched_local_module handling of "none" scheduler")
Fixes: 734e1a8603 ("block: Prevent deadlocks when switching elevators")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20241011170122.3880087-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elevator_get_default() and elv_support_iosched() both check for whether
or not q->tag_set is non-NULL, however it's not possible for them to be
NULL. This messes up some static checkers, as the checking of tag_set
isn't consistent.
Remove the checks, which both simplifies the logic and avoids checker
errors.
Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241007111416.13814-1-surajsonawane0215@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
These are called from blkcg_print_blkgs() which already disables IRQs so
disabling it again is wrong. It means that IRQs will be enabled slightly
earlier than intended, however, so far as I can see, this bug is harmless.
Fixes: 35198e3230 ("blk-iocost: read params inside lock in sysfs apis")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Zv0kudA9xyGdaA4g@stanley.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the documentation to match the new function signature.
Fixes: 76c313f658 ("blk-integrity: improved sg segment mapping")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240922141800.3622319-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=yiWu
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- Improve blk-integrity segment counting and merging (Keith)
- NVMe pull request via Keith:
- Multipath fixes (Hannes)
- Sysfs attribute list NULL terminate fix (Shin'ichiro)
- Remove problematic read-back (Keith)
- Fix for a regression with the IO scheduler switching freezing from
6.11 (Damien)
- Use a raw spinlock for sbitmap, as it may get called from preempt
disabled context (Ming)
- Cleanup for bd_claiming waiting, using var_waitqueue() rather than
the bit waitqueues, as that more accurately describes that it does
(Neil)
- Various cleanups (Kanchan, Qiu-ji, David)
* tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
lib/sbitmap: define swap_lock as raw_spinlock_t
block: Remove unused blk_limits_io_{min,opt}
drbd: Fix atomicity violation in drbd_uuid_set_bm()
block: Fix elv_iosched_local_module handling of "none" scheduler
block: remove bogus union
block: change wait on bd_claiming to use a var_waitqueue
blk-integrity: improved sg segment mapping
block: unexport blk_rq_count_integrity_sg
nvme-rdma: use request to get integrity segments
scsi: use request to get integrity segments
block: provide a request helper for user integrity segments
blk-integrity: consider entire bio list for merging
blk-integrity: properly account for segments
blk-mq: set the nr_integrity_segments from bio
blk-mq: unconditional nr_integrity_segments
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEvwAKCRCRxhvAZXjc
ohg3APwJWQnqFlBddcRl4yrPJ/cgcYSYAOdHb+E+blomSwdxcwEAmwsnLPNQOtw2
rxKvQfZqhVT437bl7RpPPZrHGxwTng8=
=6v1r
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.blocksize' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs blocksize updates from Christian Brauner:
"This contains the vfs infrastructure as well as the xfs bits to enable
support for block sizes (bs) larger than page sizes (ps) plus a few
fixes to related infrastructure.
There has been efforts over the last 16 years to enable enable Large
Block Sizes (LBS), that is block sizes in filesystems where bs > page
size. Through these efforts we have learned that one of the main
blockers to supporting bs > ps in filesystems has been a way to
allocate pages that are at least the filesystem block size on the page
cache where bs > ps.
Thanks to various previous efforts it is possible to support bs > ps
in XFS with only a few changes in XFS itself. Most changes are to the
page cache to support minimum order folio support for the target block
size on the filesystem.
A motivation for Large Block Sizes today is to support high-capacity
(large amount of Terabytes) QLC SSDs where the internal Indirection
Unit (IU) are typically greater than 4k to help reduce DRAM and so in
turn cost and space. In practice this then allows different
architectures to use a base page size of 4k while still enabling
support for block sizes aligned to the larger IUs by relying on high
order folios on the page cache when needed.
It also allows to take advantage of the drive's support for atomics
larger than 4k with buffered IO support in Linux. As described this
year at LSFMM, supporting large atomics greater than 4k enables
databases to remove the need to rely on their own journaling, so they
can disable double buffered writes, which is a feature different cloud
providers are already enabling through custom storage solutions"
* tag 'vfs-6.12.blocksize' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
Documentation: iomap: fix a typo
iomap: remove the iomap_file_buffered_write_punch_delalloc return value
iomap: pass the iomap to the punch callback
iomap: pass flags to iomap_file_buffered_write_punch_delalloc
iomap: improve shared block detection in iomap_unshare_iter
iomap: handle a post-direct I/O invalidate race in iomap_write_delalloc_release
docs:filesystems: fix spelling and grammar mistakes in iomap design page
filemap: fix htmldoc warning for mapping_align_index()
iomap: make zero range flush conditional on unwritten mappings
iomap: fix handling of dirty folios over unwritten extents
iomap: add a private argument for iomap_file_buffered_write
iomap: remove set_memor_ro() on zero page
xfs: enable block size larger than page size support
xfs: make the calculation generic in xfs_sb_validate_fsb_count()
xfs: expose block size in stat
xfs: use kvmalloc for xattr buffers
iomap: fix iomap_dio_zero() for fs bs > system page size
filemap: cap PTE range to be created to allowed zero fill in folio_map_range()
mm: split a folio in minimum folio order chunks
readahead: allocate folios with mapping_min_order in readahead
...
blk_limits_io_min and blk_limits_io_opt are unused since the
recent commit
0a94a469a4 ("dm: stop using blk_limits_io_{min,opt}")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240920004817.676216-1-linux@treblig.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc,
mpi3mr). There are no user visible core changes and a whole series of
minor updates and fixes. The largest core change is probably the
simplification of the workqueue allocation path.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZuvd5yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishV7dAQC+TSlv
BeNm8W4yAFCXLCwnJh8rT6ZzuBsjsIHH1DPP3wD+IXuIOFf5gVRJGpCNJc/dI082
/ehSrIdeJxwaNoOOt+Y=
=SXZD
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc,
mpi3mr).
There are no user visible core changes and a whole series of minor
updates and fixes. The largest core change is probably the
simplification of the workqueue allocation path"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits)
scsi: smartpqi: update driver version to 2.1.30-031
scsi: smartpqi: fix volume size updates
scsi: smartpqi: fix rare system hang during LUN reset
scsi: smartpqi: add new controller PCI IDs
scsi: smartpqi: add counter for parity write stream requests
scsi: smartpqi: correct stream detection
scsi: smartpqi: Add fw log to kdump
scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport
scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port
scsi: ufs: core: Remove ufshcd_urgent_bkops()
scsi: core: Remove obsoleted declaration for scsi_driverbyte_string()
scsi: bnx2i: Remove unused declarations
scsi: core: Simplify an alloc_workqueue() invocation
scsi: ufs: Simplify alloc*_workqueue() invocation
scsi: stex: Simplify an alloc_ordered_workqueue() invocation
scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations
scsi: snic: Simplify alloc_workqueue() invocations
scsi: qedi: Simplify an alloc_workqueue() invocation
scsi: qedf: Simplify alloc_workqueue() invocations
scsi: myrs: Simplify an alloc_ordered_workqueue() invocation
...
Commit 734e1a8603 ("block: Prevent deadlocks when switching
elevators") introduced the function elv_iosched_load_module() to allow
loading an elevator module outside of elv_iosched_store() with the
target device queue not frozen, to avoid deadlocks. However, the "none"
scheduler does not have a module and as a result,
elv_iosched_load_module() always returns an error when trying to switch
to this valid scheduler.
Fix this by ignoring the return value of the request_module() call
done by elv_iosched_load_module(). This restores the behavior before
commit 734e1a8603, which was to ignore the request_module() result and
instead rely on elevator_change() to handle the "none" scheduler case.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 734e1a8603 ("block: Prevent deadlocks when switching elevators")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240917133231.134806-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmbm9fQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGXcwH/A8+IXnrGv+VzYgD
+mE4hgGGHt4dClcUZ31gQetkkT6xktEVp6pB6JkFO7oEgBiTkJBbYGl6VZtsAIOd
Fi3jic8ik0uhZLFcxDJcHTceh6Pw8bkhWoh0tkF3bkDRwbppJdG7Khyk8DxTl24w
ldqh9om2cC7w9IPVx93xTgKgMMZ63qiJyUdTvxEZI3BG8F70smlgZSPskLp2Iktd
FIJZPcyKM0bhJYwZOpXK0vx5C2cA4oIW4xriHUw4aklv646OBxNKevB2JJAft2uA
6LyvuLgnYn/OpdFGZ8slvdmhm6hLWft5B1/bWKorUkz7p5YGiySFzpkMVAkNJ6mS
cRwHJNc=
=flw3
-----END PGP SIGNATURE-----
Merge tag 'v6.11' into for-6.12/block
Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.
* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...
- Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
- Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=JlJ2
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
bd_prepare_to_claim() waits for a var to change, not for a bit to be
cleared. Change from bit_waitqueue() to __var_waitqueue() and
correspondingly use wake_up_var(). This will allow a future patch which
change the "bit" function to expect an "unsigned long *" instead of
"void *".
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20240826063659.15327-2-neilb@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=HIAO
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Move the LSM framework to static calls
This transitions the vast majority of the LSM callbacks into static
calls. Those callbacks which haven't been converted were left as-is
due to the general ugliness of the changes required to support the
static call conversion; we can revisit those callbacks at a future
date.
- Add the Integrity Policy Enforcement (IPE) LSM
This adds a new LSM, Integrity Policy Enforcement (IPE). There is
plenty of documentation about IPE in this patches, so I'll refrain
from going into too much detail here, but the basic motivation behind
IPE is to provide a mechanism such that administrators can restrict
execution to only those binaries which come from integrity protected
storage, e.g. a dm-verity protected filesystem. You will notice that
IPE requires additional LSM hooks in the initramfs, dm-verity, and
fs-verity code, with the associated patches carrying ACK/review tags
from the associated maintainers. We couldn't find an obvious
maintainer for the initramfs code, but the IPE patchset has been
widely posted over several years.
Both Deven Bowers and Fan Wu have contributed to IPE's development
over the past several years, with Fan Wu agreeing to serve as the IPE
maintainer moving forward. Once IPE is accepted into your tree, I'll
start working with Fan to ensure he has the necessary accounts, keys,
etc. so that he can start submitting IPE pull requests to you
directly during the next merge window.
- Move the lifecycle management of the LSM blobs to the LSM framework
Management of the LSM blobs (the LSM state buffers attached to
various kernel structs, typically via a void pointer named "security"
or similar) has been mixed, some blobs were allocated/managed by
individual LSMs, others were managed by the LSM framework itself.
Starting with this pull we move management of all the LSM blobs,
minus the XFRM blob, into the framework itself, improving consistency
across LSMs, and reducing the amount of duplicated code across LSMs.
Due to some additional work required to migrate the XFRM blob, it has
been left as a todo item for a later date; from a practical
standpoint this omission should have little impact as only SELinux
provides a XFRM LSM implementation.
- Fix problems with the LSM's handling of F_SETOWN
The LSM hook for the fcntl(F_SETOWN) operation had a couple of
problems: it was racy with itself, and it was disconnected from the
associated DAC related logic in such a way that the LSM state could
be updated in cases where the DAC state would not. We fix both of
these problems by moving the security_file_set_fowner() hook into the
same section of code where the DAC attributes are updated. Not only
does this resolve the DAC/LSM synchronization issue, but as that code
block is protected by a lock, it also resolve the race condition.
- Fix potential problems with the security_inode_free() LSM hook
Due to use of RCU to protect inodes and the placement of the LSM hook
associated with freeing the inode, there is a bit of a challenge when
it comes to managing any LSM state associated with an inode. The VFS
folks are not open to relocating the LSM hook so we have to get
creative when it comes to releasing an inode's LSM state.
Traditionally we have used a single LSM callback within the hook that
is triggered when the inode is "marked for death", but not actually
released due to RCU.
Unfortunately, this causes problems for LSMs which want to take an
action when the inode's associated LSM state is actually released; so
we add an additional LSM callback, inode_free_security_rcu(), that is
called when the inode's LSM state is released in the RCU free
callback.
- Refactor two LSM hooks to better fit the LSM return value patterns
The vast majority of the LSM hooks follow the "return 0 on success,
negative values on failure" pattern, however, there are a small
handful that have unique return value behaviors which has caused
confusion in the past and makes it difficult for the BPF verifier to
properly vet BPF LSM programs. This includes patches to
convert two of these"special" LSM hooks to the common 0/-ERRNO pattern.
- Various cleanups and improvements
A handful of patches to remove redundant code, better leverage the
IS_ERR_OR_NULL() helper, add missing "static" markings, and do some
minor style fixups.
* tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (40 commits)
security: Update file_set_fowner documentation
fs: Fix file_set_fowner LSM hook inconsistencies
lsm: Use IS_ERR_OR_NULL() helper function
lsm: remove LSM_COUNT and LSM_CONFIG_COUNT
ipe: Remove duplicated include in ipe.c
lsm: replace indirect LSM hook calls with static calls
lsm: count the LSMs enabled at compile time
kernel: Add helper macros for loop unrolling
init/main.c: Initialize early LSMs after arch code, static keys and calls.
MAINTAINERS: add IPE entry with Fan Wu as maintainer
documentation: add IPE documentation
ipe: kunit test for parser
scripts: add boot policy generation program
ipe: enable support for fs-verity as a trust provider
fsverity: expose verified fsverity built-in signatures to LSMs
lsm: add security_inode_setintegrity() hook
ipe: add support for dm-verity as a trust provider
dm-verity: expose root hash digest and signature data to LSMs
block,lsm: add LSM blob and new LSM hooks for block devices
ipe: add permissive toggle
...
-----BEGIN PGP SIGNATURE-----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=wlzo
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/io_uring-discard-20240913' of git://git.kernel.dk/linux
Pull io_uring async discard support from Jens Axboe:
"Sitting on top of both the 6.12 block and io_uring core branches,
here's support for async discard through io_uring.
This allows applications to issue async discards, rather than rely on
the blocking sync ioctl discards we already have. The sync support is
difficult to use outside of idle/cleanup periods.
On a real (but slow) device, testing shows the following results when
compared to sync discard:
qd64 sync discard: 21K IOPS, lat avg 3 msec (max 21 msec)
qd64 async discard: 76K IOPS, lat avg 845 usec (max 2.2 msec)
qd64 sync discard: 14K IOPS, lat avg 5 msec (max 25 msec)
qd64 async discard: 56K IOPS, lat avg 1153 usec (max 3.6 msec)
and synthetic null_blk testing with the same queue depth and block
size settings as above shows:
Type Trim size IOPS Lat avg (usec) Lat Max (usec)
==============================================================
sync 4k 144K 444 20314
async 4k 1353K 47 595
sync 1M 56K 1136 21031
async 1M 94K 680 760"
* tag 'for-6.12/io_uring-discard-20240913' of git://git.kernel.dk/linux:
block: implement async io_uring discard cmd
block: introduce blk_validate_byte_range()
filemap: introduce filemap_invalidate_pages
io_uring/cmd: give inline space in request to cmds
io_uring/cmd: expose iowq to cmds
-----BEGIN PGP SIGNATURE-----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=uuLl
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD changes via Song:
- md-bitmap refactoring (Yu Kuai)
- raid5 performance optimization (Artur Paszkiewicz)
- Other small fixes (Yu Kuai, Chen Ni)
- Add a sysfs entry 'new_level' (Xiao Ni)
- Improve information reported in /proc/mdstat (Mateusz Kusiak)
- NVMe changes via Keith:
- Asynchronous namespace scanning (Stuart)
- TCP TLS updates (Hannes)
- RDMA queue controller validation (Niklas)
- Align field names to the spec (Anuj)
- Metadata support validation (Puranjay)
- A syntax cleanup (Shen)
- Fix a Kconfig linking error (Arnd)
- New queue-depth quirk (Keith)
- Add missing unplug trace event (Keith)
- blk-iocost fixes (Colin, Konstantin)
- t10-pi modular removal and fixes (Alexey)
- Fix for potential BLKSECDISCARD overflow (Alexey)
- bio splitting cleanups and fixes (Christoph)
- Deal with folios rather than rather than pages, speeding up how the
block layer handles bigger IOs (Kundan)
- Use spinlocks rather than bit spinlocks in zram (Sebastian, Mike)
- Reduce zoned device overhead in ublk (Ming)
- Add and use sendpages_ok() for drbd and nvme-tcp (Ofir)
- Fix regression in partition error pointer checking (Riyan)
- Add support for write zeroes and rotational status in nbd (Wouter)
- Add Yu Kuai as new BFQ maintainer. The scheduler has been
unmaintained for quite a while.
- Various sets of fixes for BFQ (Yu Kuai)
- Misc fixes and cleanups (Alvaro, Christophe, Li, Md Haris, Mikhail,
Yang)
* tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux: (120 commits)
nvme-pci: qdepth 1 quirk
block: fix potential invalid pointer dereference in blk_add_partition
blk_iocost: make read-only static array vrate_adj_pct const
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
nvme-tcp: fix link failure for TCP auth
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEwAAKCRCRxhvAZXjc
omD7AQCZuWPXkEGYFD37MJZuRXNEoq7Tuj6yd0O2b5khUpzvyAD+MPuthGiCMPsu
voPpUP83x7T0D3JsEsCAXtNeVRcIBQI=
=xTs6
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fallocate updates from Christian Brauner:
"This contains work to try and cleanup some the fallocate mode
handling. Currently, it confusingly mixes operation modes and an
optional flag.
The work here tries to better define operation modes and optional
flags allowing the core and filesystem code to use switch statements
to switch on the operation mode"
* tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: refactor xfs_file_fallocate
xfs: move the xfs_is_always_cow_inode check into xfs_alloc_file_space
xfs: call xfs_flush_unmap_range from xfs_free_file_space
fs: sort out the fallocate mode vs flag mess
ext4: remove tracing for FALLOC_FL_NO_HIDE_STALE
block: remove checks for FALLOC_FL_NO_HIDE_STALE
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEvgAKCRCRxhvAZXjc
ou77AQD3U1KjbdgzbUi6kaUmiiWOPhfYTlm8mho8dBjqvTCB+AD/XTWSFCWWhHB4
KyQZTbjRD81xmVNbKjASazp0EA6Ahwc=
=gIsD
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs folio updates from Christian Brauner:
"This contains work to port write_begin and write_end to rely on folios
for various filesystems.
This converts ocfs2, vboxfs, orangefs, jffs2, hostfs, fuse, f2fs,
ecryptfs, ntfs3, nilfs2, reiserfs, minixfs, qnx6, sysv, ufs, and
squashfs.
After this series lands a bunch of the filesystems in this list do not
mention struct page anymore"
* tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (61 commits)
Squashfs: Ensure all readahead pages have been used
Squashfs: Rewrite and update squashfs_readahead_fragment() to not use page->index
Squashfs: Update squashfs_readpage_block() to not use page->index
Squashfs: Update squashfs_readahead() to not use page->index
Squashfs: Update page_actor to not use page->index
jffs2: Use a folio in jffs2_garbage_collect_dnode()
jffs2: Convert jffs2_do_readpage_nolock to take a folio
buffer: Convert __block_write_begin() to take a folio
ocfs2: Convert ocfs2_write_zero_page to use a folio
fs: Convert aops->write_begin to take a folio
fs: Convert aops->write_end to take a folio
vboxsf: Use a folio in vboxsf_write_end()
orangefs: Convert orangefs_write_begin() to use a folio
orangefs: Convert orangefs_write_end() to use a folio
jffs2: Convert jffs2_write_begin() to use a folio
jffs2: Convert jffs2_write_end() to use a folio
hostfs: Convert hostfs_write_end() to use a folio
fuse: Convert fuse_write_begin() to use a folio
fuse: Convert fuse_write_end() to use a folio
f2fs: Convert f2fs_write_begin() to use a folio
...
Make the integrity mapping more like data mapping, blk_rq_map_sg. Use
the request to validate the segment count, and update the callers so
they don't have to.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913191746.2628196-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are no external users of this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913182854.2445457-9-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide a helper to keep the request flags and nr_integrity_segments in
sync with the bio's integrity payload. This is an integrity equivalent
to the normal data helper function, 'blk_rq_map_user()'.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913182854.2445457-6-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a bio is merged to a request, the entire bio list is merged, so don't
temporarily detach it from its list when counting segments. In most
cases, bi_next will already be NULL, so detaching is usually a no-op.
But if the bio does have a list, the current code is miscounting the
segments for the resulting merge.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913182854.2445457-5-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both types of merging when integrity data is used are miscounting the
segments:
Merging two requests wasn't accounting for the new segment count, so add
the "next" segment count to the first on a successful merge to ensure
this value is accurate.
Merging a bio into an existing request was double counting the bio's
segments, even if the merge failed later on. Move the segment accounting
to the end when the merge is successful.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913182854.2445457-4-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This value is used for merging considerations, so it needs to be
accurate.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913182854.2445457-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Always defining the field will make using it easier and less error prone
in future patches.
There shouldn't be any downside to this: the field fits in what would
otherwise be a 2-byte hole, so we're not saving space by conditionally
leaving it out.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913182854.2445457-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The blk_add_partition() function initially used a single if-condition
(IS_ERR(part)) to check for errors when adding a partition. This was
modified to handle the specific case of -ENXIO separately, allowing the
function to proceed without logging the error in this case. However,
this change unintentionally left a path where md_autodetect_dev()
could be called without confirming that part is a valid pointer.
This commit separates the error handling logic by splitting the
initial if-condition, improving code readability and handling specific
error scenarios explicitly. The function now distinguishes the general
error case from -ENXIO without altering the existing behavior of
md_autodetect_dev() calls.
Fixes: b72053072c (block: allow partitions on host aware zone devices)
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240911132954.5874-1-riyandhiman14@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring allows implementing custom file specific asynchronous
operations via the fops->uring_cmd callback, a.k.a. IORING_OP_URING_CMD
requests or just io_uring commands. Use it to add support for async
discards.
Normally, it first tries to queue up bios in a non-blocking context,
and if that fails, we'd retry from a blocking context by returning
-EAGAIN to the core io_uring. We always get the result from bios
asynchronously by setting a custom bi_end_io callback, at which point
we drag the request into the task context to either reissue or complete
it and post a completion to the user.
Unlike ioctl(BLKDISCARD) with stronger guarantees against races, we only
do a best effort attempt to invalidate page cache, and it can race with
any writes and reads and leave page cache stale. It's the same kind of
races we allow to direct writes.
Also, apart from cases where discarding is not allowed at all, e.g.
discards are not supported or the file/device is read only, the user
should assume that the sector range on disk is not valid anymore, even
when an error was returned to the user.
Suggested-by: Conrad Meyer <conradmeyer@meta.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2b5210443e4fa0257934f73dfafcc18a77cd0e09.1726072086.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-6.12/block: (115 commits)
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
md: Add new_level sysfs interface
zram: Shrink zram_table_entry::flags.
zram: Remove ZRAM_LOCK
zram: Replace bit spinlocks with a spinlock_t.
...
Use newly added mm function unpin_user_folio() to put refs by npages
count.
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240911064935.5630-5-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a bigger size from folio to bio and skip merge processing for pages.
Fetch the offset of page within a folio. Depending on the size of folio
and folio_offset, fetch a larger length. This length may consist of
multiple contiguous pages if folio is multiorder.
Using the length calculate number of pages which will be added to bio and
increment the loop counter to skip those pages.
This technique helps to avoid overhead of merging pages which belong to
same large order folio.
Also folio-ize the functions bio_iov_add_page() and
bio_iov_add_zone_append_page()
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240911064935.5630-3-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Added new bio_add_hw_folio() function as a wrapper around
bio_add_hw_page(). This is a prep patch.
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240911064935.5630-2-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The local variable is used to call bfq_bfqq_resume_state() later,
since 'bfqd->lock' is held, and bfqq status will not change between
setting 'split' and calling bfq_bfqq_resume_state(), move forward
bfq_bfqq_resume_state() so that 'split' can be removed. There are no
functional chagnes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Original state:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
After commit 0e456dba86 ("block, bfq: choose the last bfqq from merge
chain in bfq_setup_cooperator()"), if P1 issues a new IO:
Without the patch:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\------------------------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
bfqq3 will be used to handle IO from P1, this is not expected, IO
should be redirected to bfqq4;
With the patch:
-------------------------------------------
| |
Process 1 Process 2 Process 3 | Process 4
(BIC1) (BIC2) (BIC3) | (BIC4)
| | | |
\-------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
IO is redirected to bfqq4, however, procress reference of bfqq3 is still
2, while there is only P2 using it.
Fix the problem by calling bfq_merge_bfqqs() for each bfqq in the merge
chain. Also change bfqq_merge_bfqqs() to return new_bfqq to simplify
code.
Fixes: 0e456dba86 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit 42c306ed72 ("block, bfq: don't break merge chain in
bfq_split_bfqq()"), if the current procress is the last holder of bfqq,
the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and
then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq
may in the merge chain of bfqq, hence just recored waker_bfqq is still
not safe.
Fix the problem by adding a helper bfq_waker_bfqq() to check if
bfqq->waker_bfqq is in the merge chain, and current procress is the only
holder.
Fixes: 42c306ed72 ("block, bfq: don't break merge chain in bfq_split_bfqq()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, blk-throttle handle all IO fifo, hence if data IO is
throttled and then meta IO is dispatched, the meta IO will have to wait
for the data IO, causing priority inversion problems.
This patch support to handle metadata first and then pay debt while
throttling data.
Test script: use cgroup v1 to throttle root cgroup, then create new
dir and file while write back is throttled
test() {
mkdir /mnt/test/xxx
touch /mnt/test/xxx/1
sync /mnt/test/xxx
sync /mnt/test/xxx
}
mkfs.ext4 -F /dev/nvme0n1 -E lazy_itable_init=0,lazy_journal_init=0
mount /dev/nvme0n1 /mnt/test
echo "259:0 $((1024*1024))" > /sys/fs/cgroup/blkio/blkio.throttle.write_bps_device
dd if=/dev/zero of=/mnt/test/foo1 bs=16M count=1 conv=fdatasync status=none &
sleep 4
time test
echo "259:0 0" > /sys/fs/cgroup/blkio/blkio.throttle.write_bps_device
sleep 1
umount /dev/nvme0n1
Test result: time cost for creating new dir and file
before this patch: 14s
after this patch: 0.1s
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240903135149.271857-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit af28141498 ("block: freeze the queue in queue_attr_store")
changed queue_attr_store() to always freeze a sysfs attribute queue
before calling the attribute store() method, to ensure that no IOs are
in-flight when an attribute value is being updated.
However, this change created a potential deadlock situation for the
scheduler queue attribute as changing the queue elevator with
elv_iosched_store() can result in a call to request_module() if the user
requested module is not already registered. If the file of the requested
module is stored on the block device of the frozen queue, a deadlock
will happen as the read operations triggered by request_module() will
wait for the queue freeze to end.
Solve this issue by introducing the load_module method in struct
queue_sysfs_entry, and to calling this method function in
queue_attr_store() before freezing the attribute queue.
The macro definition QUEUE_RW_LOAD_MODULE_ENTRY() is added to define a
queue sysfs attribute that needs loading a module.
The definition of the scheduler atrribute is changed to using
QUEUE_RW_LOAD_MODULE_ENTRY(), with the function
elv_iosched_load_module() defined as the load_module method.
elv_iosched_store() can then be simplified to remove the call to
request_module().
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Reported-by: Jiri Jaburek <jjaburek@redhat.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219166
Fixes: af28141498 ("block: freeze the queue in queue_attr_store")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Link: https://lore.kernel.org/r/20240908000704.414538-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The single-queue optimized list flush doesn't have an unplug trace event
to pair with the plug event. Add one.
In the unlikely event an error occurs and falls back to the less
optimized plug flush path, it's possible a 2nd unplug trace event will
be logged, but it will show the remainig count that weren't previously
handled.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240906194540.3719642-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The explanatory comment used `set_task_state` instead of
`set_current_state` which is the function actually used in the code.
Signed-off-by: Alvaro Parker <alparkerdf@gmail.com>
Link: https://lore.kernel.org/r/20240903172214.520086-1-alparkerdf@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_integrity_add_page restricts the size of the integrity metadata to
queue_max_hw_sectors(q). This restriction is not needed because oversized
bios are split automatically. This restriction causes problems with
dm-integrity 'inline' mode - if we send a large bio to dm-integrity and
the bio's metadata are larger than queue_max_hw_sectors(q),
bio_integrity_add_page fails and the bio is ended with BLK_STS_RESOURCE
error.
An example that triggers it:
dd: error writing '/dev/mapper/in2': Cannot allocate memory
1+0 records in
0+0 records out
0 bytes copied, 0.00169291 s, 0.0 kB/s
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fb0987682c ("dm-integrity: introduce the Inline mode")
Fixes: 0ece1d649b ("bio-integrity: create multi-page bvecs in bio_integrity_add_page()")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/e41b3b8e-16c2-70cb-97cb-881234bb200d@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consider the following scenario:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\-------------\ \-------------\ \--------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
If Process 1 issue a new IO and bfqq2 is found, and then bfq_init_rq()
decide to spilt bfqq2 by bfq_split_bfqq(). Howerver, procress reference
of bfqq2 is 1 and bfq_split_bfqq() just clear the coop flag, which will
break the merge chain.
Expected result: caller will allocate a new bfqq for BIC1
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
| | |
\-------------\ \--------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 1 3
Since the condition is only used for the last bfqq4 when the previous
bfqq2 and bfqq3 are already splited. Fix the problem by checking if
bfqq is the last one in the merge chain as well.
Fixes: 36eca89483 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consider the following merge chain:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
IO from Process 1 will get bfqf2 from BIC1 first, then
bfq_setup_cooperator() will found bfqq2 already merged to bfqq3 and then
handle this IO from bfqq3. However, the merge chain can be much deeper
and bfqq3 can be merged to other bfqq as well.
Fix this problem by iterating to the last bfqq in
bfq_setup_cooperator().
Fixes: 36eca89483 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to switch fuse over to using iomap for buffered writes we need
to be able to have the struct file for the original write, in case we
have to read in the page to make it uptodate. Handle this by using the
existing private field in the iomap_iter, and add the argument to
iomap_file_buffered_write. This will allow us to pass the file in
through the iomap buffered write path, and is flexible for any other
file systems needs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/7f55c7c32275004ba00cddf862d970e6e633f750.1724755651.git.josef@toxicpanda.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
bio_split_rw is designed to split read and write bios with a payload.
Currently it is called by __bio_split_to_limits for all operations not
explicitly list, which works because bio_may_need_split explicitly checks
for bi_vcnt == 1 and thus skips the bypass if there is no payload and
bio_for_each_bvec loop will never execute it's body if bi_size is 0.
But all this is hard to understand, fragile and wasted pointless cycles.
Switch __bio_split_to_limits to only call bio_split_rw for READ and
WRITE command and don't attempt any kind split for operation that do not
require splitting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Link: https://lore.kernel.org/r/20240826173820.1690925-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently REQ_OP_ZONE_APPEND is handled by the bio_split_rw case in
__bio_split_to_limits. This is harmful because REQ_OP_ZONE_APPEND
bios do not adhere to the soft max_limits value but instead use their
own capped version of max_hw_sectors, leading to incorrect splits that
later blow up in bio_split.
We still need the bio_split_rw logic to count nr_segs for blk-mq code,
so add a new wrapper that passes in the right limit, and turns any bio
that would need a split into an error as an additional debugging aid.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Link: https://lore.kernel.org/r/20240826173820.1690925-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current setup with bio_may_exceed_limit and __bio_split_to_limits
is a bit of a mess.
Change it so that __bio_split_to_limits does all the work and is just
a variant of bio_split_to_limits that returns nr_segs. This is done
by inlining it and instead have the various bio_split_* helpers directly
submit the potentially split bios.
To support btrfs, the rw version has a lower level helper split out
that just returns the offset to split. This turns out to nicely clean
up the btrfs flow as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Link: https://lore.kernel.org/r/20240826173820.1690925-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While the FALLOC_FL_NO_HIDE_STALE value has been registered, it has
always been rejected by vfs_fallocate before making it into
blkdev_fallocate because it isn't in the supported mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-2-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
On error, blkdev_issue_write_zeroes used to recheck the block device's
WRITE SAME queue limits after submitting WRITE SAME bios. As stated in
the comment, the purpose of this was to collapse all IO errors to
EOPNOTSUPP if the effect of issuing bios was that WRITE SAME got turned
off in the queue limits. Therefore, it does not make sense to reuse the
zeroes limit that was read earlier in the function because we only care
about the queue limit *now*, not what it was at the start of the
function.
Found by running generic/351 from fstests.
Fixes: 64b582ca88 ("block: Read max write zeroes once for __blkdev_issue_write_zeroes()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240827175340.GB1977952@frogsfrogsfrogs
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Recently running UBSAN caught few out of bound shifts in the
ioc_forgive_debts() function:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
Call Trace:
<IRQ>
dump_stack_lvl+0xca/0x130
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
? __lock_acquire+0x6441/0x7c10
ioc_timer_fn+0x6cec/0x7750
? blk_iocost_init+0x720/0x720
? call_timer_fn+0x5d/0x470
call_timer_fn+0xfa/0x470
? blk_iocost_init+0x720/0x720
__run_timer_base+0x519/0x700
...
Actual impact of this issue was not identified but I propose to fix the
undefined behaviour.
The proposed fix to prevent those out of bound shifts consist of
precalculating exponent before using it the shift operations by taking
min value from the actual exponent and maximum possible number of bits.
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Konstantin Ovsepian <ovs@ovs.to>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240822154137.2627818-1-ovs@ovs.to
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch introduces a new LSM blob to the block_device structure,
enabling the security subsystem to store security-sensitive data related
to block devices. Currently, for a device mapper's mapped device containing
a dm-verity target, critical security information such as the roothash and
its signing state are not readily accessible. Specifically, while the
dm-verity volume creation process passes the dm-verity roothash and its
signature from userspace to the kernel, the roothash is stored privately
within the dm-verity target, and its signature is discarded
post-verification. This makes it extremely hard for the security subsystem
to utilize these data.
With the addition of the LSM blob to the block_device structure, the
security subsystem can now retain and manage important security metadata
such as the roothash and the signing state of a dm-verity by storing them
inside the blob. Access decisions can then be based on these stored data.
The implementation follows the same approach used for security blobs in
other structures like struct file, struct inode, and struct superblock.
The initialization of the security blob occurs after the creation of the
struct block_device, performed by the security subsystem. Similarly, the
security blob is freed by the security subsystem before the struct
block_device is deallocated or freed.
This patch also introduces a new hook security_bdev_setintegrity() to save
block device's integrity data to the new LSM blob. For example, for
dm-verity, it can use this hook to expose its roothash and signing state
to LSMs, then LSMs can save these data into the LSM blob.
Please note that the new hook should be invoked every time the security
information is updated to keep these data current. For example, in
dm-verity, if the mapping table is reloaded and configured to use a
different dm-verity target with a new roothash and signing information,
the previously stored data in the LSM blob will become obsolete. It is
crucial to re-invoke the hook to refresh these data and ensure they are up
to date. This necessity arises from the design of device-mapper, where a
device-mapper device is first created, and then targets are subsequently
loaded into it. These targets can be modified multiple times during the
device's lifetime. Therefore, while the LSM blob is allocated during the
creation of the block device, its actual contents are not initialized at
this stage and can change substantially over time. This includes
alterations from data that the LSM 'trusts' to those it does not, making
it essential to handle these changes correctly. Failure to address this
dynamic aspect could potentially allow for bypassing LSM checks.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: merge fuzz, subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
When soft interrupt actions are called, they are passed a pointer to the
struct softirq action which contains the action's function pointer.
This pointer isn't useful, as the action callback already knows what
function it is. And since each callback handles a specific soft interrupt,
the callback also knows which soft interrupt number is running.
No soft interrupt action callback actually uses this parameter, so remove
it from the function pointer signature. This clarifies that soft interrupt
actions are global routines and makes it slightly cheaper to call them.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/all/20240815171549.3260003-1-csander@purestorage.com
As reported in [0], we may get a hang when formatting a XFS FS on a RAID0
drive.
Commit 73a768d5f9 ("block: factor out a blk_write_zeroes_limit helper")
changed __blkdev_issue_write_zeroes() to read the max write zeroes
value in the loop. This is not safe as max write zeroes may change in
value. Specifically for the case of [0], the value goes to 0, and we get
an infinite loop.
Lift the limit reading out of the loop.
[0] https://lore.kernel.org/linux-xfs/4d31268f-310b-4220-88a2-e191c3932a82@oracle.com/T/#t
Fixes: 73a768d5f9 ("block: factor out a blk_write_zeroes_limit helper")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240815163228.216051-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function doesn't mutate data.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/d24611b3-dddf-473a-903d-39290db03b11@p183
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is not possible to build t10-pi.ko anymore.
This file doesn't even export functions.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/216ccc79-5b80-47b2-b507-990951aa810c@p183
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We check in submit_bio_noacct() if flag REQ_ATOMIC is set for both read and
write operations, and then validate the atomic operation if set. Flag
REQ_ATOMIC can only be set for writes, so don't bother checking for reads.
Fixes: 9da3d1e912 ("block: Add core atomic write support")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240805113315.1048591-3-john.g.garry@oracle.com
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Convert all callers from working on a page to working on one page
of a folio (support for working on an entire folio can come later).
Removes a lot of folio->page->folio conversions.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Most callers have a folio, and most implementations operate on a folio,
so remove the conversion from folio->page->folio to fit through this
interface.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
All callers now have a folio, so pass it in instead of converting
from a folio to a page and back to a folio again. Saves a call
to compound_head().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replaces two hidden calls to compound_head() with one explicit one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
ioprio works on the blk-cgroup level, all disks in the same cgroup
are the same, and the struct ioprio_blkg doesn't have anything in it.
Hence register the policy is enough, because cpd_alloc/free_fn will
be handled for each blk-cgroup, and there is no need to activate the
policy for disk. Hence remove blk_ioprio_init/exit and
ioprio_alloc/free_pd.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240719071506.158075-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, if config is enabled, then ioprio is always enabled by
default from blkcg_init_disk(), hence there is no point to check if
the policy is enabled from blkg in ioprio_blkcg_from_bio(). Hence remove
it and get blkcg directly from bio.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240719071506.158075-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently all policies implement pd_(alloc|free)_fn, however, this is
not necessary for ioprio that only works for blkcg, not blkg.
There are no functional changes, prepare to cleanup activating ioprio
policy.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240719071506.158075-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The struct 'latency_bucket' and the #define 'request_bucket_index'
are unused since
commit bf20ab538c ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW")
and the 'LATENCY_BUCKET_SIZE' #define was only used by the
'request_bucket_index' define.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240727155824.1000042-1-linux@treblig.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=fqoV
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/block-20240722' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD fixes via Song:
- md-cluster fixes (Heming Zhao)
- raid1 fix (Mateusz Jończyk)
- s390/dasd module description (Jeff)
- Series cleaning up and hardening the blk-mq debugfs flag handling
(John, Christoph)
- blk-cgroup cleanup (Xiu)
- Error polled IO attempts if backend doesn't support it (hexue)
- Fix for an sbitmap hang (Yang)
* tag 'for-6.11/block-20240722' of git://git.kernel.dk/linux: (23 commits)
blk-cgroup: move congestion_count to struct blkcg
sbitmap: fix io hung due to race on sbitmap_word::cleared
block: avoid polling configuration errors
block: Catch possible entries missing from rqf_name[]
block: Simplify definition of RQF_NAME()
block: Use enum to define RQF_x bit indexes
block: Catch possible entries missing from cmd_flag_name[]
block: Catch possible entries missing from alloc_policy_name[]
block: Catch possible entries missing from hctx_flag_name[]
block: Catch possible entries missing from hctx_state_name[]
block: Catch possible entries missing from blk_queue_flag_name[]
block: Make QUEUE_FLAG_x as an enum
block: Relocate BLK_MQ_MAX_DEPTH
block: Relocate BLK_MQ_CPU_WORK_BATCH
block: remove QUEUE_FLAG_STOPPED
block: Add missing entry to hctx_flag_name[]
block: Add zone write plugging entry to rqf_name[]
block: Add missing entries from cmd_flag_name[]
s390/dasd: fix error checks in dasd_copy_pair_store()
s390/dasd: add missing MODULE_DESCRIPTION() macros
...
-----BEGIN PGP SIGNATURE-----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=dn4l
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/block-post-20240722' of git://git.kernel.dk/linux
Pull block integrity mapping updates from Jens Axboe:
"A set of cleanups and fixes for the block integrity support.
Sent separately from the main block changes from last week, as they
depended on later fixes in the 6.10-rc cycle"
* tag 'for-6.11/block-post-20240722' of git://git.kernel.dk/linux:
block: don't free the integrity payload in bio_integrity_unmap_free_user
block: don't free submitter owned integrity payload on I/O completion
block: call bio_integrity_unmap_free_user from blk_rq_unmap_user
block: don't call bio_uninit from bio_endio
block: also return bio_integrity_payload * from stubs
block: split integrity support out of bio.h
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr) plus some
misc small fixes. The only core changes are to both bsg and scsi to
pass in the device instead of setting it afterwards as q->queuedata,
so no functional change.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZpl6BiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVkAAQCOLA0V
TFI4RfRjk7TW/6ZgKVS5A4NNLG8p8r9F7Y/QswEAlT4NrYnHiHQwBYEiTw6w02J8
SqiHtHKv/SQ7LIwEJlQ=
=WhCT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr) plus some
misc small fixes.
The only core changes are to both bsg and scsi to pass in the device
instead of setting it afterwards as q->queuedata, so no functional
change"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (69 commits)
scsi: aha152x: Use DECLARE_COMPLETION_ONSTACK for non-constant completion
scsi: qla2xxx: Convert comma to semicolon
scsi: qla2xxx: Update version to 10.02.09.300-k
scsi: qla2xxx: Use QP lock to search for bsg
scsi: qla2xxx: Reduce fabric scan duplicate code
scsi: qla2xxx: Fix optrom version displayed in FDMI
scsi: qla2xxx: During vport delete send async logout explicitly
scsi: qla2xxx: Complete command early within lock
scsi: qla2xxx: Fix flash read failure
scsi: qla2xxx: Return ENOBUFS if sg_cnt is more than one for ELS cmds
scsi: qla2xxx: Fix for possible memory corruption
scsi: qla2xxx: validate nvme_local_port correctly
scsi: qla2xxx: Unable to act on RSCN for port online
scsi: ufs: exynos: Add support for Flash Memory Protector (FMP)
scsi: ufs: core: Add UFSHCD_QUIRK_KEYS_IN_PRDT
scsi: ufs: core: Add fill_crypto_prdt variant op
scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE
scsi: ufs: core: fold ufshcd_clear_keyslot() into its caller
scsi: ufs: core: Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE
scsi: ufs: mcq: Make .get_hba_mac() optional
...
The congestion_count was introduced into the struct cgroup by
commit d09d8df3a2 ("blkcg: add generic throttling mechanism"),
but since it is closely related to the blkio subsys, it is not
appropriate to put it in the struct cgroup, so let's move it to
struct blkcg. There should be no functional changes because blkcg
is per cgroup.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240716133058.3491350-1-xiujianfeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds a poll queue check, aiming to help users use polled IO
accurately.
If users do polled IO but the device doesn't have poll queues, they will
get suboptimal performance data and waste CPU resources. Add a poll queue
check batching this. If users don't have the device properly configured,
or if it simply doesn't support polled IO, it will error the IO with
-EOPNOTSUPP. This is similar to what we used to do for sync polled IO,
which is no longer supported.
Signed-off-by: hexue <xue01.he@samsung.com>
Link: https://lore.kernel.org/r/20240718070817.1031494-1-xue01.he@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
rqf_name[].
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-16-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we have a bit index for RQF_x in __RQF_x, use __RQF_x to simplify
the definition of RQF_NAME() by not using ilog2((__force u32()).
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-15-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
cmd_flag_name[].
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-13-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make BLK_TAG_ALLOC_x an enum and add a "max" entry.
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
hctx_flag_name[].
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-12-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refresh values in BLK_MQ_F_x enum, and then re-arrange members in
hctx_flag_name[] to match that enum. Renumber
BLK_MQ_F_ALLOC_POLICY_START_BIT to match the value refresh.
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
hctx_flag_name[].
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-11-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a build-time assert that we are not missing entries from
hctx_state_name[]. For this, create a separate enum for state flags and add
a "max" entry for BLK_MQ_S_x flags.
The numbering for those enum values is as default, so don't explicitly
number.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-10-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Assert that we are not missing flag entries in blk_queue_flag_name[].
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240719112912.3830443-9-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmaOTd8QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgppqIEACUr8Vv2FtezvT3OfVSlYWHHLXzkRhwEG5s
vdk0o7Ow6U54sMjfymbHTgLD0ZOJf3uJ6BI95FQuW41jPzDFVbx4Hy8QzqonMkw9
1D/YQ4zrVL2mOKBzATbKpoGJzMOzGeoXEueFZ1AYPAX7RrDtP4xPQNfrcfkdE2zF
LycJN70Vp6lrZZMuI9yb9ts1tf7TFzK0HJANxOAKTgSiPmBmxesjkJlhrdUrgkAU
qDVyjj7u/ssndBJAb9i6Bl95Do8s9t4DeJq5/6wgKqtf5hClMXzPVB8Wy084gr6E
rTRsCEhOug3qEZSqfAgAxnd3XFRNc/p2KMUe5YZ4mAqux4hpSmIQQDM/5X5K9vEv
f4MNqUGlqyqntZx+KPyFpf7kLHFYS1qK4ub0FojWJEY4GrbBPNjjncLJ9+ozR0c8
kNDaFjMNAjalBee1FxNNH8LdVcd28rrCkPxRLEfO/gvBMUmvJf4ZyKmSED0v5DhY
vZqKlBqG+wg0EXvdiWEHMDh9Y+q/2XBIkS6NN/Bhh61HNu+XzC838ts1X7lR+4o2
AM5Vapw+v0q6kFBMRP3IcJI/c0UcIU8EQU7axMyzWtvhog8kx8x01hIj1L4UyYYr
rUdWrkugBVXJbywFuH/QIJxWxS/z4JdSw5VjASJLIrXy+aANmmG9Wonv95eyhpUv
5iv+EdRSNA==
=wVi8
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
