API:
- Remove crypto stats interface.
Algorithms:
- Add faster AES-XTS on modern x86_64 CPUs.
- Forbid curves with order less than 224 bits in ecc (FIPS 186-5).
- Add ECDSA NIST P521.
Drivers:
- Expose otp zone in atmel.
- Add dh fallback for primes > 4K in qat.
- Add interface for live migration in qat.
- Use dma for aes requests in starfive.
- Add full DMA support for stm32mpx in stm32.
- Add Tegra Security Engine driver.
Others:
- Introduce scope-based x509_certificate allocation.
-----BEGIN PGP SIGNATURE-----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=NDS0
-----END PGP SIGNATURE-----
Merge tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove crypto stats interface
Algorithms:
- Add faster AES-XTS on modern x86_64 CPUs
- Forbid curves with order less than 224 bits in ecc (FIPS 186-5)
- Add ECDSA NIST P521
Drivers:
- Expose otp zone in atmel
- Add dh fallback for primes > 4K in qat
- Add interface for live migration in qat
- Use dma for aes requests in starfive
- Add full DMA support for stm32mpx in stm32
- Add Tegra Security Engine driver
Others:
- Introduce scope-based x509_certificate allocation"
* tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits)
crypto: atmel-sha204a - provide the otp content
crypto: atmel-sha204a - add reading from otp zone
crypto: atmel-i2c - rename read function
crypto: atmel-i2c - add missing arg description
crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy()
crypto: sahara - use 'time_left' variable with wait_for_completion_timeout()
crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout()
crypto: caam - i.MX8ULP donot have CAAM page0 access
crypto: caam - init-clk based on caam-page0-access
crypto: starfive - Use fallback for unaligned dma access
crypto: starfive - Do not free stack buffer
crypto: starfive - Skip unneeded fallback allocation
crypto: starfive - Skip dma setup for zeroed message
crypto: hisilicon/sec2 - fix for register offset
crypto: hisilicon/debugfs - mask the unnecessary info from the dump
crypto: qat - specify firmware files for 402xx
crypto: x86/aes-gcm - simplify GCM hash subkey derivation
crypto: x86/aes-gcm - delete unused GCM assembly code
crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath()
hwrng: stm32 - repair clock handling
...
Add support for Tegra Security Engine which can accelerate various
crypto algorithms. The Engine has two separate instances within for
AES and HASH algorithms respectively.
The driver registers two crypto engines - one for AES and another for
HASH algorithms and these operate independently and both uses the host1x
bus. Additionally, it provides hardware-assisted key protection for up
to 15 symmetric keys which it can use for the cipher operations.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The configuration option ZCRYPT_DEBUG is used only in ap queue code,
so rename it to AP_DEBUG. It also no longer depends on ZCRYPT but on
AP. While at it, also update the help text.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
There is no hard requirement to have the ap bus statically in the
kernel, so add an option to compile it as module.
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Relocate all crypto files in vmx driver to arch/powerpc/crypto directory
and remove vmx directory.
drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/aes.c
drivers/crypto/vmx/aes_cbc.c rename to arch/powerpc/crypto/aes_cbc.c
drivers/crypto/vmx/aes_ctr.c rename to arch/powerpc/crypto/aes_ctr.c
drivers/crypto/vmx/aes_xts.c rename to arch/powerpc/crypto/aes_xts.c
drivers/crypto/vmx/aesp8-ppc.h rename to arch/powerpc/crypto/aesp8-ppc.h
drivers/crypto/vmx/aesp8-ppc.pl rename to arch/powerpc/crypto/aesp8-ppc.pl
drivers/crypto/vmx/ghash.c rename to arch/powerpc/crypto/ghash.c
drivers/crypto/vmx/ghashp8-ppc.pl rename to arch/powerpc/crypto/ghashp8-ppc.pl
drivers/crypto/vmx/vmx.c rename to arch/powerpc/crypto/vmx.c
deleted files:
drivers/crypto/vmx/Makefile
drivers/crypto/vmx/Kconfig
drivers/crypto/vmx/ppc-xlate.pl
This patch has been tested has passed the selftest. The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert sahara driver to use crypto_engine, rather than doing manual queue
management.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the legacy device driver code for CEX2 and CEX3 cards.
The last machines which are able to handle CEX2 crypto cards
are z10 EC first available 2008 and z10 BC first available 2009.
The last machines able to handle a CEX3 crypto card are
z196 first available 2010 and z114 first available 2011.
Please note that this does not imply to drop CEX2 and CEX3
support in general. With older kernels on hardware up to the
aforementioned machine models these crypto cards will get
support by IBM.
The removal of the CEX2 and CEX3 device drivers code opens up
some simplifications, for example support for crypto cards
without rng support can be removed also.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Fix virtual vs physical address confusion in vmem_add_range()
and vmem_remove_range() functions.
- Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h>
throughout s390 code.
- Make all PSW related defines also available for assembler files.
Remove PSW_DEFAULT_KEY define from uapi for that.
- When adding an undefined symbol the build still succeeds, but
userspace crashes trying to execute VDSO, because the symbol
is not resolved. Add undefined symbols check to prevent that.
- Use kvmalloc_array() instead of kzalloc() for allocaton of 256k
memory when executing s390 crypto adapter IOCTL.
- Add -fPIE flag to prevent decompressor misaligned symbol build
error with clang.
- Use .balign instead of .align everywhere. This is a no-op for s390,
but with this there no mix in using .align and .balign anymore.
- Filter out -mno-pic-data-is-text-relative flag when compiling
kernel to prevent VDSO build error.
- Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS
mask directly.
- Do not retry administrative requests to some s390 crypto cards,
since the firmware assumes replay attacks.
- Remove most of the debug code, which is build in when kernel config
option CONFIG_ZCRYPT_DEBUG is enabled.
- Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch
off the multiple devices support for the s390 zcrypt device driver.
- With the conversion to generic entry machine checks are accounted
to the current context instead of irq time. As result, the STCKF
instruction at the beginning of the machine check handler and the
lowcore member are no longer required, therefore remove it.
- Fix various typos found with codespell.
- Minor cleanups to CPU-measurement Counter and Sampling Facilities code.
- Revert patch that removes VMEM_MAX_PHYS macro, since it causes
a regression.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZKakSBccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8HeIAQCg9RX3/olsZhCqRNLZ/O+6FXAF
29ohi2JmVqxJBKkmwgEA/QXCjoTOp41pQJ1FD39HnI8DeYpJFRnYYE5D3acibAw=
=2Ykk
-----END PGP SIGNATURE-----
Merge tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Fix virtual vs physical address confusion in vmem_add_range() and
vmem_remove_range() functions
- Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h>
throughout s390 code
- Make all PSW related defines also available for assembler files.
Remove PSW_DEFAULT_KEY define from uapi for that
- When adding an undefined symbol the build still succeeds, but
userspace crashes trying to execute VDSO, because the symbol is not
resolved. Add undefined symbols check to prevent that
- Use kvmalloc_array() instead of kzalloc() for allocaton of 256k
memory when executing s390 crypto adapter IOCTL
- Add -fPIE flag to prevent decompressor misaligned symbol build error
with clang
- Use .balign instead of .align everywhere. This is a no-op for s390,
but with this there no mix in using .align and .balign anymore
- Filter out -mno-pic-data-is-text-relative flag when compiling kernel
to prevent VDSO build error
- Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS
mask directly
- Do not retry administrative requests to some s390 crypto cards, since
the firmware assumes replay attacks
- Remove most of the debug code, which is build in when kernel config
option CONFIG_ZCRYPT_DEBUG is enabled
- Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch
off the multiple devices support for the s390 zcrypt device driver
- With the conversion to generic entry machine checks are accounted to
the current context instead of irq time. As result, the STCKF
instruction at the beginning of the machine check handler and the
lowcore member are no longer required, therefore remove it
- Fix various typos found with codespell
- Minor cleanups to CPU-measurement Counter and Sampling Facilities
code
- Revert patch that removes VMEM_MAX_PHYS macro, since it causes a
regression
* tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits)
Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"
s390/cpum_sf: remove check on CPU being online
s390/cpum_sf: handle casts consistently
s390/cpum_sf: remove unnecessary debug statement
s390/cpum_sf: remove parameter in call to pr_err
s390/cpum_sf: simplify function setup_pmu_cpu
s390/cpum_cf: remove unneeded debug statements
s390/entry: remove mcck clock
s390: fix various typos
s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option
s390/zcrypt: do not retry administrative requests
s390/zcrypt: cleanup some debug code
s390/entry: rework entering DAT-on mode on CPU restart
s390/mm: fence off VM macros from asm and linker
s390: include linux/io.h instead of asm/io.h
s390/ptrace: make all psw related defines also available for asm
s390/ptrace: remove PSW_DEFAULT_KEY from uapi
s390/vdso: filter out mno-pic-data-is-text-relative cflag
s390: consistently use .balign instead of .align
s390/decompressor: fix misaligned symbol build error
...
Remove ZCRYPT_MULTIDEVNODES kernel config option and make
the dependent code always build.
The last years showed, that this option is enabled on all distros
and exploited by some features (for example CEX plugin for kubernetes).
So remove this choice as it was never used to switch off the multiple
devices support for the zcrypt device driver.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With the growing number of Intel crypto drivers, it makes sense to
group them all into a single drivers/crypto/intel/ directory.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the growing number of Intel crypto drivers, it makes sense to
group them all into a single drivers/crypto/intel/ directory.
Create a separate drivers/crypto/intel/ixp4xx directory and move
drivers/crypto/ixp4xx_crypto.c to it, along with a new Kconfig and
Makefile to contain the config and make bits.
Also add a COMPILE_TEST dependency to CRYPTO_DEV_IXP4XX so it can be
more easily compile-tested.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Corentin LABBE <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the growing number of Intel crypto drivers, it makes sense to
group them all into a single drivers/crypto/intel/ directory.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SA2UL Crypto driver provides support for couple of
DES3 algos "cbc(des3_ede)" and "ecb(des3_ede)", and enabling
the crypto selftest throws the following errors (as seen on
K3 J721E SoCs):
saul-crypto 4e00000.crypto: Error allocating fallback algo cbc(des3_ede)
alg: skcipher: failed to allocate transform for cbc-des3-sa2ul: -2
saul-crypto 4e00000.crypto: Error allocating fallback algo ecb(des3_ede)
alg: skcipher: failed to allocate transform for ecb-des3-sa2ul: -2
Fix this by selecting CRYPTO_DES which was missed while
adding base driver support.
Fixes: 7694b6ca64 ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It turns out we can just modify the newer STM32 HASH driver
to be used with Ux500 and now that we have done that, delete
the old and sparsely maintained Ux500 HASH driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit d2825fa936 ("crypto: sm3,sm4 - move into crypto directory") moves
the SM3 and SM4 stand-alone library and the algorithm implementation for
the Crypto API into the same directory, and the corresponding relationship
of Kconfig is modified, CONFIG_CRYPTO_SM3/4 corresponds to the stand-alone
library of SM3/4, and CONFIG_CRYPTO_SM3/4_GENERIC corresponds to the
algorithm implementation for the Crypto API. Therefore, it is necessary
for this module to depend on the correct algorithm.
Fixes: d2825fa936 ("crypto: sm3,sm4 - move into crypto directory")
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enable to access usage stats for each algorithm.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of doing manual queue management, let's use the crypto/engine
for that.
In the same time, rework the requests handling to be easier to
understand (and fix all bugs related to them).
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware does not handle 0 size length request, let's add a
fallback.
Furthermore fallback will be used for all unaligned case the hardware
cannot handle.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).
Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.
The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
General setup --->
Platform selection --->
Kernel Features --->
Boot options --->
Power management options --->
CPU Power Management --->
[*] ACPI (Advanced Configuration and Power Interface) Support --->
[*] Virtualization --->
[*] ARM Accelerated Cryptographic Algorithms --->
(or)
[*] ARM64 Accelerated Cryptographic Algorithms --->
...
-*- Cryptographic API --->
Library routines --->
Kernel hacking --->
and moves into the Cryptographic API menu, which now contains:
...
Accelerated Cryptographic Algorithms for CPU (arm) --->
(or)
Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*] Hardware crypto devices --->
...
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the CRYPTO_AES_ARM64 selection by the TI security
accelerator driver (SA2UL), which leads to this problem when
running make allmodconfig for arm (32-bit):
WARNING: unmet direct dependencies detected for CRYPTO_AES_ARM64
Depends on [n]: CRYPTO [=y] && ARM64
Selected by [m]:
- CRYPTO_DEV_SA2UL [=m] && CRYPTO [=y] && CRYPTO_HW [=y] && (ARCH_K3
|| COMPILE_TEST [=y])
Fixes: 7694b6ca64 ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hash and Crypto Engine (HACE) is designed to accelerate the
throughput of hash data digest, encryption, and decryption.
Basically, HACE can be divided into two independently engines
- Hash Engine and Crypto Engine. This patch aims to add HACE
hash engine driver for hash accelerator.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Reviewed-by: Dhananjay Phadke <dphadke@linux.microsoft.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Various accelerated software implementation Kconfig values for S390 were
mistakenly placed into drivers/crypto/Kconfig, even though they're
mainly just SIMD code and live in arch/s390/crypto/ like usual. This
gives them the very unusual dependency on CRYPTO_HW, which leads to
problems elsewhere.
This patch fixes the issue by moving the Kconfig values for non-hardware
drivers into the usual place in crypto/Kconfig.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement a crypto library interface for the s390-native ChaCha20 cipher
algorithm. This allows us to stop to select CRYPTO_CHACHA20 and instead
select CRYPTO_ARCH_HAVE_LIB_CHACHA. This allows BIG_KEYS=y not to build
a whole ChaCha20 crypto infrastructure as a built-in, but build a smaller
CRYPTO_LIB_CHACHA instead.
Make CRYPTO_CHACHA_S390 config entry to look like similar ones on other
architectures. Remove CRYPTO_ALGAPI select as anyway it is selected by
CRYPTO_SKCIPHER.
Add a new test module and a test script for ChaCha20 cipher and its
interfaces. Here are test results on an idle z15 machine:
Data | Generic crypto TFM | s390 crypto TFM | s390 lib
size | enc dec | enc dec | enc dec
-----+--------------------+------------------+----------------
512b | 1545ns 1295ns | 604ns 446ns | 430ns 407ns
4k | 9536ns 9463ns | 2329ns 2174ns | 2170ns 2154ns
64k | 149.6us 149.3us | 34.4us 34.5us | 33.9us 33.1us
6M | 23.61ms 23.11ms | 4223us 4160us | 3951us 4008us
60M | 143.9ms 143.9ms | 33.5ms 33.2ms | 32.2ms 32.1ms
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zynqmp-sha driver is always loaded and register its algorithm even on
platform which do not have the proper hardware.
This lead to a stacktrace due to zynqmp-sha3-384 failing its crypto
self tests.
So check if hardware is present via the firmware API call get_version.
While at it, simplify the platform_driver by using module_platform_driver()
Furthermore the driver should depend on ZYNQMP_FIRMWARE since it cannot
work without it.
Fixes: 7ecc3e3447 ("crypto: xilinx - Add Xilinx SHA3 driver")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds SHA3 driver support for the Xilinx ZynqMP SoC.
Xilinx ZynqMP SoC has SHA3 engine used for secure hash calculation.
The flow is
SHA3 request from Userspace -> SHA3 driver-> ZynqMp driver-> Firmware ->
SHA3 HW Engine
SHA3 HW engine in Xilinx ZynqMP SoC, does not support parallel processing
of 2 hash requests.
Therefore, software fallback is being used for init, update, final,
export and import in the ZynqMP SHA driver
For digest, the calculation of SHA3 hash is done by the hardened
SHA3 accelerator in Xilinx ZynqMP SoC.
Signed-off-by: Harsha <harsha.harsha@xilinx.com>
Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an implementation of the ChaCha20 stream cipher (see e.g. RFC 7539)
that makes use of z13's vector instruction set extension.
The original implementation is by Andy Polyakov which is
adapted for kernel use.
Four to six blocks are processed in parallel resulting in a performance
gain for inputs >= 256 bytes.
chacha20-generic
1 operation in 622 cycles (256 bytes)
1 operation in 2346 cycles (1024 bytes)
chacha20-s390
1 operation in 218 cycles (256 bytes)
1 operation in 647 cycles (1024 bytes)
Cc: Andy Polyakov <appro@openssl.org>
Reviewed-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The Storlink SL3516 crypto engine is only present on Storlink
Semiconductor/Storm Semiconductor/Cortina Systems Gemini SoCs.
Hence add a dependency on ARCH_GEMINI, to prevent asking the user about
this driver when configuring a kernel without Gemini support.
While at it, group the dependencies.
Fixes: 46c5338db7 ("crypto: sl3516 - Add sl3516 crypto engine")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to Documentation/devicetree/bindings/arm/gemini.txt, the
company was originally named "Storlink Semiconductor", and later renamed
to "Storm Semiconductor".
Fixes: 46c5338db7 ("crypto: sl3516 - Add sl3516 crypto engine")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sl3516 driver need to depend on HAS_IOMEM.
This fixes a build error:
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/crypto/gemini/sl3516-ce.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drivers/crypto/gemini/sl3516-ce-core.c:345:12:
warning: ‘sl3516_ce_pm_resume’ defined but not used [-Wunused-function]
static int sl3516_ce_pm_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~
The driver needs PM, otherwise clock and resets are never set.
So make it depends on PM to fix this warning.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Suggested-by: LABBE Corentin <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cortina/gemini SL3516 SoC has a crypto IP name either (crypto
engine/crypto acceleration engine in the datasheet).
It support many algorithms like [AES|DES|3DES][ECB|CBC], SHA1, MD5 and
some HMAC.
This patch adds the core files and support for ecb(aes) and the RNG.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Testing ixp4xx_crypto lead to:
alg: skcipher: ecb(des)-ixp4xx encryption overran dst buffer on test vector 0, cfg="two even aligned splits"
The HW overwrites destination always when sg_nents() > 1.
The problem seems that the HW always write areq->cryptlen bytes on the
last SG.
A comment in driver's code seems to give a clue that multiple SG was not
planned "This was never tested by Intel for more than one dst buffer, I think".
So let's add a fallback for this situation.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is currently possible to build CONFIG_HW_RANDOM_PPC4XX=y with
CONFIG_HW_RANDOM=m which would lead to the inability of linking with
devm_hwrng_{register,unregister}. We cannot have the framework modular
and the consumer of that framework built-in, so make that dependency
explicit.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver was converted to use the crypto engine helper
but is missing the corresponding Kconfig statement to ensure
it is available:
arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_probe':
omap-sham.c:(.text+0x374): undefined reference to `crypto_engine_alloc_init'
arm-linux-gnueabi-ld: omap-sham.c:(.text+0x384): undefined reference to `crypto_engine_start'
arm-linux-gnueabi-ld: omap-sham.c:(.text+0x510): undefined reference to `crypto_engine_exit'
arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_finish_req':
omap-sham.c:(.text+0x98c): undefined reference to `crypto_finalize_hash_request'
arm-linux-gnueabi-ld: omap-sham.c:(.text+0x9a0): undefined reference to `crypto_transfer_hash_request_to_engine'
arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_update':
omap-sham.c:(.text+0xf24): undefined reference to `crypto_transfer_hash_request_to_engine'
arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_final':
omap-sham.c:(.text+0x1020): undefined reference to `crypto_transfer_hash_request_to_engine'
Fixes: 133c3d434d ("crypto: omap-sham - convert to use crypto engine")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PicoXcell has had nothing but treewide cleanups for at least the last 8
years and no signs of activity. The most recent activity is a yocto vendor
kernel based on v3.0 in 2015.
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto mediatek driver has been replaced by the inside-secure
driver now. Remove this driver to avoid having duplicate drivers.
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The bitreverse helper is almost always built into the kernel,
but in a rare randconfig build it is possible to hit a case
in which it is a loadable module while the atmel-i2c driver
is built-in:
arm-linux-gnueabi-ld: drivers/crypto/atmel-i2c.o: in function `atmel_i2c_checksum':
atmel-i2c.c:(.text+0xa0): undefined reference to `byte_rev_table'
Add one more 'select' statement to prevent this.
Fixes: 11105693fa ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the AES/SM4 crypto engine included in the Offload and
Crypto Subsystem (OCS) of the Intel Keem Bay SoC, thus enabling
hardware-acceleration for the following transformations:
- ecb(aes), cbc(aes), ctr(aes), cts(cbc(aes)), gcm(aes) and cbc(aes);
supported for 128-bit and 256-bit keys.
- ecb(sm4), cbc(sm4), ctr(sm4), cts(cbc(sm4)), gcm(sm4) and cbc(sm4);
supported for 128-bit keys.
The driver passes crypto manager self-tests, including the extra tests
(CRYPTO_MANAGER_EXTRA_TESTS=y).
Signed-off-by: Mike Healy <mikex.healy@intel.com>
Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are a couple of spelling mistakes in two crypto Kconfig files.
Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Remove address space overrides using set_fs().
- Convert to generic vDSO.
- Convert to generic page table dumper.
- Add ARCH_HAS_DEBUG_WX support.
- Add leap seconds handling support.
- Add NVMe firmware-assisted kernel dump support.
- Extend NVMe boot support with memory clearing control and addition of
kernel parameters.
- AP bus and zcrypt api code rework. Add adapter configure/deconfigure
interface. Extend debug features. Add failure injection support.
- Add ECC secure private keys support.
- Add KASan support for running protected virtualization host with
4-level paging.
- Utilize destroy page ultravisor call to speed up secure guests shutdown.
- Implement ioremap_wc() and ioremap_prot() with MIO in PCI code.
- Various checksum improvements.
- Other small various fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl+JXIIACgkQjYWKoQLX
FBgIWAf9FKpnIsy/aNI2RpvojfySEhgH3T5zxGDTjghCSUQzAu0hIBPKhQOs/YfV
/apflXxNPneq7FsQPPpNqfdz2DXQrtgDfecK+7GyEVoOawFArgxiwP+tDVy4dmPT
30PNfr+BpGs7GjKuj33fC0c5U33HYvKzUGJn/GQB2Fhw+5tTDxxCubuS1GVR9iuw
/U1cQhG4KN0lwEeF2gO7BWWgqTH9C1t60+WzOQhIAbdvgtBRr1ctGu//F5S94BYL
NBw5Wxb9vUHrMm2mL0n8bi16hSn2MWHmAMQLkxPXI2osBYun3soaHUWFSA3ryFMw
4BGU+g7T66Pv3ZmLP4jH5UGrn8HWmg==
=4zdC
-----END PGP SIGNATURE-----
Merge tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Remove address space overrides using set_fs()
- Convert to generic vDSO
- Convert to generic page table dumper
- Add ARCH_HAS_DEBUG_WX support
- Add leap seconds handling support
- Add NVMe firmware-assisted kernel dump support
- Extend NVMe boot support with memory clearing control and addition of
kernel parameters
- AP bus and zcrypt api code rework. Add adapter configure/deconfigure
interface. Extend debug features. Add failure injection support
- Add ECC secure private keys support
- Add KASan support for running protected virtualization host with
4-level paging
- Utilize destroy page ultravisor call to speed up secure guests
shutdown
- Implement ioremap_wc() and ioremap_prot() with MIO in PCI code
- Various checksum improvements
- Other small various fixes and improvements all over the code
* tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits)
s390/uaccess: fix indentation
s390/uaccess: add default cases for __put_user_fn()/__get_user_fn()
s390/zcrypt: fix wrong format specifications
s390/kprobes: move insn_page to text segment
s390/sie: fix typo in SIGP code description
s390/lib: fix kernel doc for memcmp()
s390/zcrypt: Introduce Failure Injection feature
s390/zcrypt: move ap_msg param one level up the call chain
s390/ap/zcrypt: revisit ap and zcrypt error handling
s390/ap: Support AP card SCLP config and deconfig operations
s390/sclp: Add support for SCLP AP adapter config/deconfig
s390/ap: add card/queue deconfig state
s390/ap: add error response code field for ap queue devices
s390/ap: split ap queue state machine state from device state
s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG
s390/zcrypt: introduce msg tracking in zcrypt functions
s390/startup: correct early pgm check info formatting
s390: remove orphaned extern variables declarations
s390/kasan: make sure int handler always run with DAT on
s390/ipl: add support to control memory clearing for nvme re-IPL
...
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
Introduce a new config switch CONFIG_ZCRYPT_DEBUG which
will be used to enable some features for debugging the
zcrypt device driver and ap bus system:
Another patch will use this for displaying ap card and
ap queue state information via sysfs attribute.
A furher patch will use this to enable some special
treatment for some fields of an crypto request to be able
to inject failures and so help debugging with regards
to handling of failures.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
