Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
Pull networking updates from David Miller:
1) Support ipv6 checksum offload in sunvnet driver, from Shannon
Nelson.
2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
Dumazet.
3) Allow generic XDP to work on virtual devices, from John Fastabend.
4) Add bpf device maps and XDP_REDIRECT, which can be used to build
arbitrary switching frameworks using XDP. From John Fastabend.
5) Remove UFO offloads from the tree, gave us little other than bugs.
6) Remove the IPSEC flow cache, from Florian Westphal.
7) Support ipv6 route offload in mlxsw driver.
8) Support VF representors in bnxt_en, from Sathya Perla.
9) Add support for forward error correction modes to ethtool, from
Vidya Sagar Ravipati.
10) Add time filter for packet scheduler action dumping, from Jamal Hadi
Salim.
11) Extend the zerocopy sendmsg() used by virtio and tap to regular
sockets via MSG_ZEROCOPY. From Willem de Bruijn.
12) Significantly rework value tracking in the BPF verifier, from Edward
Cree.
13) Add new jump instructions to eBPF, from Daniel Borkmann.
14) Rework rtnetlink plumbing so that operations can be run without
taking the RTNL semaphore. From Florian Westphal.
15) Support XDP in tap driver, from Jason Wang.
16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.
17) Add Huawei hinic ethernet driver.
18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
Delalande.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
i40e: avoid NVM acquire deadlock during NVM update
drivers: net: xgene: Remove return statement from void function
drivers: net: xgene: Configure tx/rx delay for ACPI
drivers: net: xgene: Read tx/rx delay for ACPI
rocker: fix kcalloc parameter order
rds: Fix non-atomic operation on shared flag variable
net: sched: don't use GFP_KERNEL under spin lock
vhost_net: correctly check tx avail during rx busy polling
net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
rxrpc: Make service connection lookup always check for retry
net: stmmac: Delete dead code for MDIO registration
gianfar: Fix Tx flow control deactivation
cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
cxgb4: Fix pause frame count in t4_get_port_stats
cxgb4: fix memory leak
tun: rename generic_xdp to skb_xdp
tun: reserve extra headroom only when XDP is set
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
net: dsa: bcm_sf2: Advertise number of egress queues
...
When running perf on the ftrace:function tracepoint, there is a bug
which can be reproduced by:
perf record -e ftrace:function -a sleep 20 &
perf record -e ftrace:function ls
perf script
ls 10304 [005] 171.853235: ftrace:function:
perf_output_begin
ls 10304 [005] 171.853237: ftrace:function:
perf_output_begin
ls 10304 [005] 171.853239: ftrace:function:
task_tgid_nr_ns
ls 10304 [005] 171.853240: ftrace:function:
task_tgid_nr_ns
ls 10304 [005] 171.853242: ftrace:function:
__task_pid_nr_ns
ls 10304 [005] 171.853244: ftrace:function:
__task_pid_nr_ns
We can see that all the function traces are doubled.
The problem is caused by the inconsistency of the register
function perf_ftrace_event_register() with the probe function
perf_ftrace_function_call(). The former registers one probe
for every perf_event. And the latter handles all perf_events
on the current cpu. So when two perf_events on the current cpu,
the traces of them will be doubled.
So this patch adds an extra parameter "event" for perf_tp_event,
only send sample data to this event when it's not NULL.
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: huawei.libin@huawei.com
Link: http://lkml.kernel.org/r/1503668977-12526-1-git-send-email-zhouchengming1@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Two small memory leaks in error paths.
- A missed return error code on an error path.
- A fix to check the tracing ring buffer CPU when it doesn't
exist (caused by setting maxcpus on the command line that is less
than the actual number of CPUs, and then onlining them manually).
- A fix to have the reset of boot tracers called by lateinit_sync()
instead of just lateinit(). As some of the tracers register via
lateinit(), and if the clear happens before the tracer is registered,
it will never start even though it was told to via the kernel command
line.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEQEw9Eu0DdyUUkuUUybkF8mrZjcsFAlme4DwUHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQybkF8mrZjcssNwf+Itap7Mtbk48wJYNqfjk1pzyiOcYV
WM88EOBFM46dttVN6cBs2uUmtdvmX/g52RtsHzG6ZbwxzLE+tIGbSO2plGoknOyD
lro5CSHT2j3bu0enqkxfznDUT0PNrELEaYBoMK0yhMsXm0v+XqHUxkIqb19Ubuo+
ORPBShZghJtAiEBFArV1nXBW1kzrIFJwjymdF2ccqUlg+XxtPS1wgnZPIOjCa8ia
YM4bX3aTUh4LiUUvS7FlJsrwjB+JFOHdXu1Vg140CvJEon1a+bW4Jx88MxoN6zrp
xmFlXm/8MLWz27GO11IkveH01mSrdP67bKIIx8v2ybPBbwsW0Msb2HfZkw==
=rUJQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various bug fixes:
- Two small memory leaks in error paths.
- A missed return error code on an error path.
- A fix to check the tracing ring buffer CPU when it doesn't exist
(caused by setting maxcpus on the command line that is less than
the actual number of CPUs, and then onlining them manually).
- A fix to have the reset of boot tracers called by lateinit_sync()
instead of just lateinit(). As some of the tracers register via
lateinit(), and if the clear happens before the tracer is
registered, it will never start even though it was told to via the
kernel command line"
* tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix freeing of filter in create_filter() when set_str is false
tracing: Fix kmemleak in tracing_map_array_free()
ftrace: Check for null ret_stack on profile function graph entry function
ring-buffer: Have ring_buffer_alloc_read_page() return error on offline CPU
tracing: Missing error code in tracer_alloc_buffers()
tracing: Call clear_boot_tracer() at lateinit_sync
Performing the following task with kmemleak enabled:
# cd /sys/kernel/tracing/events/irq/irq_handler_entry/
# echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger
# echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger
# echo scan > /sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8800b9290308 (size 32):
comm "bash", pid 1114, jiffies 4294848451 (age 141.139s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0
[<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290
[<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940
[<ffffffff812639c9>] create_filter+0xa9/0x160
[<ffffffff81263bdc>] create_event_filter+0xc/0x10
[<ffffffff812655e5>] set_trigger_filter+0xe5/0x210
[<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490
[<ffffffff812652e2>] event_trigger_write+0x1a2/0x260
[<ffffffff8138cf87>] __vfs_write+0xd7/0x380
[<ffffffff8138f421>] vfs_write+0x101/0x260
[<ffffffff8139187b>] SyS_write+0xab/0x130
[<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe
[<ffffffffffffffff>] 0xffffffffffffffff
The function create_filter() is passed a 'filterp' pointer that gets
allocated, and if "set_str" is true, it is up to the caller to free it, even
on error. The problem is that the pointer is not freed by create_filter()
when set_str is false. This is a bug, and it is not up to the caller to free
the filter on error if it doesn't care about the string.
Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com
Cc: stable@vger.kernel.org
Fixes: 38b78eb85 ("tracing: Factorize filter creation")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Tested-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's a small race when function graph shutsdown and the calling of the
registered function graph entry callback. The callback must not reference
the task's ret_stack without first checking that it is not NULL. Note, when
a ret_stack is allocated for a task, it stays allocated until the task exits.
The problem here, is that function_graph is shutdown, and a new task was
created, which doesn't have its ret_stack allocated. But since some of the
functions are still being traced, the callbacks can still be called.
The normal function_graph code handles this, but starting with commit
8861dd303c ("ftrace: Access ret_stack->subtime only in the function
profiler") the profiler code references the ret_stack on function entry, but
doesn't check if it is NULL first.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196611
Cc: stable@vger.kernel.org
Fixes: 8861dd303c ("ftrace: Access ret_stack->subtime only in the function profiler")
Reported-by: lilydjwg@gmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James reported that on MIPS32 bpf_trace_printk() is currently
broken while MIPS64 works fine:
bpf_trace_printk() uses conditional operators to attempt to
pass different types to __trace_printk() depending on the
format operators. This doesn't work as intended on 32-bit
architectures where u32 and long are passed differently to
u64, since the result of C conditional operators follows the
"usual arithmetic conversions" rules, such that the values
passed to __trace_printk() will always be u64 [causing issues
later in the va_list handling for vscnprintf()].
For example the samples/bpf/tracex5 test printed lines like
below on MIPS32, where the fd and buf have come from the u64
fd argument, and the size from the buf argument:
[...] 1180.941542: 0x00000001: write(fd=1, buf= (null), size=6258688)
Instead of this:
[...] 1625.616026: 0x00000001: write(fd=1, buf=009e4000, size=512)
One way to get it working is to expand various combinations
of argument types into 8 different combinations for 32 bit
and 64 bit kernels. Fix tested by James on MIPS32 and MIPS64
as well that it resolves the issue.
Fixes: 9c959c863f ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, bpf programs cannot be attached to sys_enter_* and sys_exit_*
style tracepoints. The iovisor/bcc issue #748
(https://github.com/iovisor/bcc/issues/748) documents this issue.
For example, if you try to attach a bpf program to tracepoints
syscalls/sys_enter_newfstat, you will get the following error:
# ./tools/trace.py t:syscalls:sys_enter_newfstat
Ioctl(PERF_EVENT_IOC_SET_BPF): Invalid argument
Failed to attach BPF to tracepoint
The main reason is that syscalls/sys_enter_* and syscalls/sys_exit_*
tracepoints are treated differently from other tracepoints and there
is no bpf hook to it.
This patch adds bpf support for these syscalls tracepoints by
. permitting bpf attachment in ioctl PERF_EVENT_IOC_SET_BPF
. calling bpf programs in perf_syscall_enter and perf_syscall_exit
The legality of bpf program ctx access is also checked.
Function trace_event_get_offsets returns correct max offset for each
specific syscall tracepoint, which is compared against the maximum offset
access in bpf program.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chunyu Hu reported:
"per_cpu trace directories and files are created for all possible cpus,
but only the cpus which have ever been on-lined have their own per cpu
ring buffer (allocated by cpuhp threads). While trace_buffers_open, the
open handler for trace file 'trace_pipe_raw' is always trying to access
field of ring_buffer_per_cpu, and would panic with the NULL pointer.
Align the behavior of trace_pipe_raw with trace_pipe, that returns -NODEV
when openning it if that cpu does not have trace ring buffer.
Reproduce:
cat /sys/kernel/debug/tracing/per_cpu/cpu31/trace_pipe_raw
(cpu31 is never on-lined, this is a 16 cores x86_64 box)
Tested with:
1) boot with maxcpus=14, read trace_pipe_raw of cpu15.
Got -NODEV.
2) oneline cpu15, read trace_pipe_raw of cpu15.
Get the raw trace data.
Call trace:
[ 5760.950995] RIP: 0010:ring_buffer_alloc_read_page+0x32/0xe0
[ 5760.961678] tracing_buffers_read+0x1f6/0x230
[ 5760.962695] __vfs_read+0x37/0x160
[ 5760.963498] ? __vfs_read+0x5/0x160
[ 5760.964339] ? security_file_permission+0x9d/0xc0
[ 5760.965451] ? __vfs_read+0x5/0x160
[ 5760.966280] vfs_read+0x8c/0x130
[ 5760.967070] SyS_read+0x55/0xc0
[ 5760.967779] do_syscall_64+0x67/0x150
[ 5760.968687] entry_SYSCALL64_slow_path+0x25/0x25"
This was introduced by the addition of the feature to reuse reader pages
instead of re-allocating them. The problem is that the allocation of a
reader page (which is per cpu) does not check if the cpu is online and set
up for the ring buffer.
Link: http://lkml.kernel.org/r/1500880866-1177-1-git-send-email-chuhu@redhat.com
Cc: stable@vger.kernel.org
Fixes: 73a757e631 ("ring-buffer: Return reader page back into existing ring buffer")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If ring_buffer_alloc() or one of the next couple function calls fail
then we should return -ENOMEM but the current code returns success.
Link: http://lkml.kernel.org/r/20170801110201.ajdkct7vwzixahvx@mwanda
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: b32614c034 ('tracing/rb: Convert to hotplug state machine')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The clear_boot_tracer function is used to reset the default_bootup_tracer
string to prevent it from being accessed after boot, as it originally points
to init data. But since clear_boot_tracer() is called via the
init_lateinit() call, it races with the initcall for registering the hwlat
tracer. If someone adds "ftrace=hwlat" to the kernel command line, depending
on how the linker sets up the text, the saved command line may be cleared,
and the hwlat tracer never is initialized.
Simply have the clear_boot_tracer() be called by initcall_lateinit_sync() as
that's for tasks to be called after lateinit.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196551
Cc: stable@vger.kernel.org
Fixes: e7c15cd8a ("tracing: Added hardware latency tracer")
Reported-by: Zamir SUN <sztsian@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently cfq/bfq/blk-throttle output cgroup info in trace in their own
way. Now we have standard blktrace API for this, so convert them to use
it.
Note, this changes the behavior a little bit. cgroup info isn't output
by default, we only do this with 'blk_cgroup' option enabled. cgroup
info isn't output as a string by default too, we only do this with
'blk_cgname' option enabled. Also cgroup info is output in different
position of the note string. I think these behavior changes aren't a big
issue (actually we make trace data shorter which is good), since the
blktrace note is solely for debugging.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By default we output cgroup id in blktrace. This adds an option to
display cgroup path. Since get cgroup path is a relativly heavy
operation, we don't enable it by default.
with the option enabled, blktrace will output something like this:
dd-1353 [007] d..2 293.015252: 8,0 /test/level D R 24 + 8 [dd]
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently blktrace isn't cgroup aware. blktrace prints out task name of
current context, but the task of current context isn't always in the
cgroup where the BIO comes from. We can't use task name to find out IO
cgroup. For example, Writeback BIOs always comes from flusher thread but
the BIOs are for different blk cgroups. Request could be requeued and
dispatched from completely different tasks. MD/DM are another examples.
This patch tries to fix the gap. We print out cgroup fhandle info in
blktrace. Userspace can use open_by_handle_at() syscall to find the
cgroup by fhandle. Or userspace can use name_to_handle_at() syscall to
find fhandle for a cgroup and use a BPF program to filter out blktrace
for a specific cgroup.
We add a new 'blk_cgroup' trace option for blk tracer. It's default off.
Application which doesn't know the new option isn't affected. When it's
on, we output fhandle info right after blk_io_trace with an extra bit
set in event action. So from application point of view, blktrace with
the option will output new actions.
I didn't change blk trace event yet, since I'm not sure if changing the
trace event output is an ABI issue. If not, I'll do it later.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variables which are processed by RCU functions should be annotated
as RCU, otherwise sparse will report the errors like below:
"error: incompatible types in comparison expression (different
address spaces)"
Link: http://lkml.kernel.org/r/1496823171-7758-1-git-send-email-zhang.chunyan@linaro.org
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
[ Updated to not be 100% 80 column strict ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Hit the kmemleak when executing instance_rmdir, it forgot releasing
mem of tracing_cpumask. With this fix, the warn does not appear any
more.
unreferenced object 0xffff93a8dfaa7c18 (size 8):
comm "mkdir", pid 1436, jiffies 4294763622 (age 9134.308s)
hex dump (first 8 bytes):
ff ff ff ff ff ff ff ff ........
backtrace:
[<ffffffff88b6567a>] kmemleak_alloc+0x4a/0xa0
[<ffffffff8861ea41>] __kmalloc_node+0xf1/0x280
[<ffffffff88b505d3>] alloc_cpumask_var_node+0x23/0x30
[<ffffffff88b5060e>] alloc_cpumask_var+0xe/0x10
[<ffffffff88571ab0>] instance_mkdir+0x90/0x240
[<ffffffff886e5100>] tracefs_syscall_mkdir+0x40/0x70
[<ffffffff886565c9>] vfs_mkdir+0x109/0x1b0
[<ffffffff8865b1d0>] SyS_mkdir+0xd0/0x100
[<ffffffff88403857>] do_syscall_64+0x67/0x150
[<ffffffff88b710e7>] return_from_SYSCALL_64+0x0/0x6a
[<ffffffffffffffff>] 0xffffffffffffffff
Link: http://lkml.kernel.org/r/1500546969-12594-1-git-send-email-chuhu@redhat.com
Cc: stable@vger.kernel.org
Fixes: ccfe9e42e4 ("tracing: Make tracing_cpumask available for all instances")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace can fail to allocate per-CPU ring buffer on systems with a large
number of CPUs coupled while large amounts of cache happening in the
page cache. Currently the ring buffer allocation doesn't retry in the VM
implementation even if direct-reclaim made some progress but still
wasn't able to find a free page. On retrying I see that the allocations
almost always succeed. The retry doesn't happen because __GFP_NORETRY is
used in the tracer to prevent the case where we might OOM, however if we
drop __GFP_NORETRY, we risk destabilizing the system if OOM killer is
triggered. To prevent this situation, use the __GFP_RETRY_MAYFAIL flag
introduced recently [1].
Tested the following still succeeds without destabilizing a system with
1GB memory.
echo 300000 > /sys/kernel/debug/tracing/buffer_size_kb
[1] https://marc.info/?l=linux-mm&m=149820805124906&w=2
Link: http://lkml.kernel.org/r/20170713021416.8897-1-joelaf@google.com
Cc: Tim Murray <timmurray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Show the tgid mappings for user space trace tools to use
- Fix and optimize the comm and tgid cache recording
- Sanitize derived kprobe names
- Ftrace selftest updates
- trace file header fix
- Update of Documentation/trace/ftrace.txt
- Compiler warning fixes
- Fix possible uninitialized variable
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZZ2rbFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
V3MIAI3NZ3dr0dKJ7DMF1jsQc24YF/bMG2noWm2b9+H/sO+gbnJKsizqzrB2Cm8S
lFCYGSydLKGGZgKob3wkAX15iO2fxcUvJOKzkKxmyDbwAteABRf9LSr/llthRIsT
8kSPI5bgJ5dah+lvhl9+1ekarsIZGr41svY97Knj9A2K18kQplnSNqgatkIuV2Kn
hIoiPI0tG2y27In2JJoaTedAHj4NIwmI3nhTt6nks0GN7ICx3bMcvdE9l+zB+OLJ
akAehsTk3kcNb66ttoj6ZTzGZ7kaes96Cl6/uamVpXzh3SXla36ux1r9Kp8bgONE
EgrJwbRwU8BMDaattutDxT7/XmU=
=TPGB
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"A few more minor updates:
- Show the tgid mappings for user space trace tools to use
- Fix and optimize the comm and tgid cache recording
- Sanitize derived kprobe names
- Ftrace selftest updates
- trace file header fix
- Update of Documentation/trace/ftrace.txt
- Compiler warning fixes
- Fix possible uninitialized variable"
* tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix uninitialized variable in match_records()
ftrace: Remove an unneeded NULL check
ftrace: Hide cached module code for !CONFIG_MODULES
tracing: Do note expose stack_trace_filter without DYNAMIC_FTRACE
tracing: Update Documentation/trace/ftrace.txt
tracing: Fixup trace file header alignment
selftests/ftrace: Add a testcase for kprobe event naming
selftests/ftrace: Add a test to probe module functions
selftests/ftrace: Update multiple kprobes test for powerpc
trace/kprobes: Sanitize derived event names
tracing: Attempt to record other information even if some fail
tracing: Treat recording tgid for idle task as a success
tracing: Treat recording comm for idle task as a success
tracing: Add saved_tgids file to show cached pid to tgid mappings
My static checker complains that if "func" is NULL then "clear_filter"
is uninitialized. This seems like it could be true, although it's
possible something subtle is happening that I haven't seen.
kernel/trace/ftrace.c:3844 match_records()
error: uninitialized symbol 'clear_filter'.
Link: http://lkml.kernel.org/r/20170712073556.h6tkpjcdzjaozozs@mwanda
Cc: stable@vger.kernel.org
Fixes: f0a3b154bd ("ftrace: Clarify code for mod command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
"func" can't be NULL and it doesn't make sense to check because we've
already derefenced it.
Link: http://lkml.kernel.org/r/20170712073340.4enzeojeoupuds5a@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When modules are disabled, we get a harmless build warning:
kernel/trace/ftrace.c:4051:13: error: 'process_cached_mods' defined but not used [-Werror=unused-function]
This adds the same #ifdef around the new code that exists around
its caller.
Link: http://lkml.kernel.org/r/20170710084413.1820568-1-arnd@arndb.de
Fixes: d7fbf8df7c ("ftrace: Implement cached modules tracing on module load")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The "stack_trace_filter" file only makes sense if DYNAMIC_FTRACE is
configured in. If it is not, then the user can not filter any functions.
Not only that, the open function causes warnings when DYNAMIC_FTRACE is not
set.
Link: http://lkml.kernel.org/r/20170710110521.600806-1-arnd@arndb.de
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The addition of TGID to the tracing header added a check to see if TGID
shoudl be displayed or not, and updated the header accordingly.
Unfortunately, it broke the default header.
Also add constant strings to use for spacing. This does remove the
visibility of the header a bit, but cuts it down from the extended lines
much greater than 80 characters.
Before this change:
# tracer: function
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU#|||| TIMESTAMP FUNCTION
# | | | |||| | |
swapper/0-1 [000] .... 0.277830: migration_init <-do_one_initcall
swapper/0-1 [002] d... 13.861967: Unknown type 1201
swapper/0-1 [002] d..1 13.861970: Unknown type 1202
After this change:
# tracer: function
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
swapper/0-1 [000] .... 0.278245: migration_init <-do_one_initcall
swapper/0-1 [003] d... 13.861189: Unknown type 1201
swapper/0-1 [003] d..1 13.861192: Unknown type 1202
Cc: Joel Fernandes <joelaf@google.com>
Fixes: 441dae8f2f ("tracing: Add support for display of tgid in trace output")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull perf fixes from Thomas Gleixner:
"A couple of fixes for perf and kprobes:
- Add he missing exclude_kernel attribute for the precise_ip level so
!CAP_SYS_ADMIN users get the proper results.
- Warn instead of failing completely when perf has no unwind support
for a particular architectiure built in.
- Ensure that jprobes are at function entry and not at some random
place"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Ensure that jprobe probepoints are at function entry
kprobes: Simplify register_jprobes()
kprobes: Rename [arch_]function_offset_within_entry() to [arch_]kprobe_on_func_entry()
perf unwind: Do not fail due to missing unwind support
perf evsel: Set attr.exclude_kernel when probing max attr.precise_ip
When we derive event names, convert some expected symbols (such as ':'
used to specify module:name and '.' present in some symbols) into
underscores so that the event name is not rejected.
Before this patch:
# echo 'p kobject_example:foo_store' > kprobe_events
trace_kprobe: Failed to allocate trace_probe.(-22)
-sh: write error: Invalid argument
After this patch:
# echo 'p kobject_example:foo_store' > kprobe_events
# cat kprobe_events
p:kprobes/p_kobject_example_foo_store_0 kobject_example:foo_store
Link: http://lkml.kernel.org/r/66c189e09e71361aba91dd4a5bd146a1b62a7a51.1499453040.git.naveen.n.rao@linux.vnet.ibm.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rename function_offset_within_entry() to scope it to kprobe namespace by
using kprobe_ prefix, and to also simplify it.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3aa6c7e2e4fb6e00f3c24fa306496a66edb558ea.1499443367.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This update consists of:
-- TAP13 framework and changes to some tests to convert to TAP13.
Converting kselftest output to standard format will help identify
run to run differences and pin point failures easily. TAP13 format
has been in use for several years and the output is human friendly.
Please find the specification:
https://testanything.org/tap-version-13-specification.html
Credit goes to Tim Bird for recommending TAP13 as a suitable format,
and to Grag KH for kick starting the work with help from Paul Elder
and Alice Ferrazzi
The first phase of the TAp13 conversion is included in this update.
Future updates will include updates to rest of the tests.
-- Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.
-- Kselftest documnetation has been converted to ReST format. Document
now has a new home under Documentation/dev-tools.
-- kselftest_harness.h is now available for general use as a result of
Mickaël Salaün's work.
-- Several fixes to skip and/or fail tests gracefully on older releases.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZXo9JAAoJEAsCRMQNDUMc1OUQAOJsBFWiMgWWxOZg1RBT5khl
7OvGLoHsu3qydF5gzVnyDuEZAGHRc4c6OKqbHIqQB3tp9o4PnX2m9KIa6z7sjzys
jett2ZjMe7BtctBluZF0zVyCbRdAXgfxp7QGfv/CkN+hw4uztwFwen4LpwvJseLd
gkie/lVPFKszyaWfiF3pDPazk5qhc53ChjAhnSkRY8HlwFcVtZwO7Ptvex0l8gO2
t+ZxhX9zt3jxRbiHq5h/N6EDw2pPthvSR4iT4FcyYiwqxUK64Nq5RQpkxJTfu0iz
l2mxMTNol/tDKH+iOvWJX565LzVXxonCf8Cne4mooqegkn0f2bnkPqoE5N8OwTdd
oIGT/Vq84C5eQwPubtr2oXr6Xh7pywbPW8h7fn972QWl5ySbR4JEmdBzSviF5ALq
Dwz8lJeGX6qYpSKz8aVqKYJ3U31hYxT/EPhGIJ4VtjcTxyfgcobaD26W0vT0Cjad
dIdK11IDMxErquS1Vb/kkTzVxCnVhmWRsjmUeKLl/FxDkhiJmjIxaCOvtitzsiHz
tooMpcCQ7Z97QbDxKfolpcCC563okYhUoca3EhZLq9pZkEwfbGN9YI4/i608oSaA
K4mJgdL6c704TqGwouIBn/+MTWq4LOkzN2zUP0kpY2z61GvEPMYxmdoQBn2yHBb9
cnt9MZNlZML2YqnMjiDf
=j1Um
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"This update consists of:
- TAP13 framework and changes to some tests to convert to TAP13.
Converting kselftest output to standard format will help identify
run to run differences and pin point failures easily. TAP13 format
has been in use for several years and the output is human friendly.
Please find the specification:
https://testanything.org/tap-version-13-specification.html
Credit goes to Tim Bird for recommending TAP13 as a suitable
format, and to Grag KH for kick starting the work with help from
Paul Elder and Alice Ferrazzi
The first phase of the TAp13 conversion is included in this update.
Future updates will include updates to rest of the tests.
- Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.
- Kselftest documnetation has been converted to ReST format. Document
now has a new home under Documentation/dev-tools.
- kselftest_harness.h is now available for general use as a result of
Mickaël Salaün's work.
- Several fixes to skip and/or fail tests gracefully on older
releases"
* tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (48 commits)
selftests: membarrier: use ksft_* var arg msg api
selftests: breakpoints: breakpoint_test_arm64: convert test to use TAP13
selftests: breakpoints: step_after_suspend_test use ksft_* var arg msg api
selftests: breakpoint_test: use ksft_* var arg msg api
kselftest: add ksft_print_msg() function to output general information
kselftest: make ksft_* output functions variadic
selftests/capabilities: Fix the test_execve test
selftests: intel_pstate: add .gitignore
selftests: fix memory-hotplug test
selftests: add missing test name in memory-hotplug test
selftests: check percentage range for memory-hotplug test
selftests: check hot-pluggagble memory for memory-hotplug test
selftests: typo correction for memory-hotplug test
selftests: ftrace: Use md5sum to take less time of checking logs
tools/testing/selftests/sysctl: Add pre-check to the value of writes_strict
kselftest.rst: do some adjustments after ReST conversion
selftest/net/Makefile: Specify output with $(OUTPUT)
selftest/intel_pstate/aperf: Use LDLIBS instead of LDFLAGS
selftest/memfd/Makefile: Fix build error
selftests: lib: Skip tests on missing test modules
...
In recent patches where we record comm and tgid at the same time, we skip
continuing to record if any fail. Fix that by trying to record as many things
as we can even if some couldn't be recorded. If any information isn't recorded,
then we don't set trace_taskinfo_save as before.
Link: http://lkml.kernel.org/r/20170706230023.17942-3-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently we stop recording tgid for non-idle tasks when switching from/to idle
task since we treat that as a record failure. Fix that by treat recording of
tgid for idle task as a success.
Link: http://lkml.kernel.org/r/20170706230023.17942-2-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Reported-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently we stop recording comm for non-idle tasks when switching from/to idle
task since we treat that as a record failure. Fix that by treat recording of
comm for idle task as a success.
Link: http://lkml.kernel.org/r/20170706230023.17942-1-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Reported-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Added TRACE_DEFINE_SIZEOF() which allows trace events that use
sizeof() it the TP_printk() to be converted to the actual size such
that trace-cmd and perf can parse them correctly.
- Some rework of the TRACE_DEFINE_ENUM() such that the above
TRACE_DEFINE_SIZEOF() could reuse the same code.
- Recording of tgid (Thread Group ID). This is similar to how
task COMMs are recorded (cached at sched_switch), where it is
in a table and used on output of the trace and trace_pipe files.
- Have ":mod:<module>" be cached when written into set_ftrace_filter.
Then the functions of the module will be traced at module load.
- Some random clean ups and small fixes.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZXjYuFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
fsgIAKUvhpn2igoYCR9tWqu+DovEmwxCIumbCzmCFQcRKlLttRte94yY5+W9hnV0
JPzd9T9zBDVqq1fI7iIop1SuTwEfKW6lJom0usZ8AFpK+YKm6FHnQ28POlvHzre2
lzO41tpRWiehLQsITZ47eByhsvEfhx86mYT/oM1JSR6Pii1OpjyNYmDMw6BaMNBT
kSCQFgIhzAhVuHjwAnB/S++E/ou7M5bCwCb5CNh7MubKubV5upHpoJcgYGO+WWa6
56H/iEhff4EECTGJVefd8e78MtJPL8EsuM0nAcMPlnl8AaiOpP7XCdlgTwdefLvP
b3o+nP15voSHkARGXC6eM6gH0po=
=rvGB
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The new features of this release:
- Added TRACE_DEFINE_SIZEOF() which allows trace events that use
sizeof() it the TP_printk() to be converted to the actual size such
that trace-cmd and perf can parse them correctly.
- Some rework of the TRACE_DEFINE_ENUM() such that the above
TRACE_DEFINE_SIZEOF() could reuse the same code.
- Recording of tgid (Thread Group ID). This is similar to how task
COMMs are recorded (cached at sched_switch), where it is in a table
and used on output of the trace and trace_pipe files.
- Have ":mod:<module>" be cached when written into set_ftrace_filter.
Then the functions of the module will be traced at module load.
- Some random clean ups and small fixes"
* tag 'trace-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (26 commits)
ftrace: Test for NULL iter->tr in regex for stack_trace_filter changes
ftrace: Decrement count for dyn_ftrace_total_info for init functions
ftrace: Unlock hash mutex on failed allocation in process_mod_list()
tracing: Add support for display of tgid in trace output
tracing: Add support for recording tgid of tasks
ftrace: Decrement count for dyn_ftrace_total_info file
ftrace: Remove unused function ftrace_arch_read_dyn_info()
sh/ftrace: Remove only user of ftrace_arch_read_dyn_info()
ftrace: Have cached module filters be an active filter
ftrace: Implement cached modules tracing on module load
ftrace: Have the cached module list show in set_ftrace_filter
ftrace: Add :mod: caching infrastructure to trace_array
tracing: Show address when function names are not found
ftrace: Add missing comment for FTRACE_OPS_FL_RCU
tracing: Rename update the enum_map file
tracing: Add TRACE_DEFINE_SIZEOF() macros
tracing: define TRACE_DEFINE_SIZEOF() macro to map sizeof's to their values
tracing: Rename enum_replace to eval_replace
trace: rename enum_map functions
trace: rename trace.c enum functions
...
Export the cached pid / tgid mappings in debugfs tracing saved_tgids file.
This allows user apps to translate the pids from a trace to their respective
thread group.
Example saved_tgids file with pid / tgid values separated by ' ':
# cat saved_tgids
1048 1048
1047 1047
7 7
1049 1047
1054 1047
1053 1047
Link: http://lkml.kernel.org/r/20170630004023.064965233@goodmis.org
Link: http://lkml.kernel.org/r/20170706040713.unwkumbta5menygi@mikesart-cos
Reviewed-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
As writing into stack_trace_filter, the iter-tr is not set and is NULL.
Check if it is NULL before dereferencing it in ftrace_regex_release().
Fixes: 8c08f0d5c6 ("ftrace: Have cached module filters be an active filter")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Need to get the changes from 0f17976568 ("ftrace: Fix regression with
module command in stack_trace_filter") as it is required to fix some other
changes with stack_trace_filter and the new development code.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull core block/IO updates from Jens Axboe:
"This is the main pull request for the block layer for 4.13. Not a huge
round in terms of features, but there's a lot of churn related to some
core cleanups.
Note this depends on the UUID tree pull request, that Christoph
already sent out.
This pull request contains:
- A series from Christoph, unifying the error/stats codes in the
block layer. We now use blk_status_t everywhere, instead of using
different schemes for different places.
- Also from Christoph, some cleanups around request allocation and IO
scheduler interactions in blk-mq.
- And yet another series from Christoph, cleaning up how we handle
and do bounce buffering in the block layer.
- A blk-mq debugfs series from Bart, further improving on the support
we have for exporting internal information to aid debugging IO
hangs or stalls.
- Also from Bart, a series that cleans up the request initialization
differences across types of devices.
- A series from Goldwyn Rodrigues, allowing the block layer to return
failure if we will block and the user asked for non-blocking.
- Patch from Hannes for supporting setting loop devices block size to
that of the underlying device.
- Two series of patches from Javier, fixing various issues with
lightnvm, particular around pblk.
- A series from me, adding support for write hints. This comes with
NVMe support as well, so applications can help guide data placement
on flash to improve performance, latencies, and write
amplification.
- A series from Ming, improving and hardening blk-mq support for
stopping/starting and quiescing hardware queues.
- Two pull requests for NVMe updates. Nothing major on the feature
side, but lots of cleanups and bug fixes. From the usual crew.
- A series from Neil Brown, greatly improving the bio rescue set
support. Most notably, this kills the bio rescue work queues, if we
don't really need them.
- Lots of other little bug fixes that are all over the place"
* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
lightnvm: pblk: set line bitmap check under debug
lightnvm: pblk: verify that cache read is still valid
lightnvm: pblk: add initialization check
lightnvm: pblk: remove target using async. I/Os
lightnvm: pblk: use vmalloc for GC data buffer
lightnvm: pblk: use right metadata buffer for recovery
lightnvm: pblk: schedule if data is not ready
lightnvm: pblk: remove unused return variable
lightnvm: pblk: fix double-free on pblk init
lightnvm: pblk: fix bad le64 assignations
nvme: Makefile: remove dead build rule
blk-mq: map all HWQ also in hyperthreaded system
nvmet-rdma: register ib_client to not deadlock in device removal
nvme_fc: fix error recovery on link down.
nvmet_fc: fix crashes on bad opcodes
nvme_fc: Fix crash when nvme controller connection fails.
nvme_fc: replace ioabort msleep loop with completion
nvme_fc: fix double calls to nvme_cleanup_cmd()
nvme-fabrics: verify that a controller returns the correct NQN
nvme: simplify nvme_dev_attrs_are_visible
...
Currently, bpf_trace_printk does not support common formatting
symbol '%i' however vsprintf does and is what eventually gets
called by bpf helper. If users are used to '%i' and currently
make use of it, then bpf_trace_printk will just return with
error without dumping anything to the trace pipe, so just add
support for '%i' to the helper.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This work tries to make the semantics and code around the
narrower ctx access a bit easier to follow. Right now
everything is done inside the .is_valid_access(). Offset
matching is done differently for read/write types, meaning
writes don't support narrower access and thus matching only
on offsetof(struct foo, bar) is enough whereas for read
case that supports narrower access we must check for
offsetof(struct foo, bar) + offsetof(struct foo, bar) +
sizeof(<bar>) - 1 for each of the cases. For read cases of
individual members that don't support narrower access (like
packet pointers or skb->cb[] case which has its own narrow
access logic), we check as usual only offsetof(struct foo,
bar) like in write case. Then, for the case where narrower
access is allowed, we also need to set the aux info for the
access. Meaning, ctx_field_size and converted_op_size have
to be set. First is the original field size e.g. sizeof(<bar>)
as in above example from the user facing ctx, and latter
one is the target size after actual rewrite happened, thus
for the kernel facing ctx. Also here we need the range match
and we need to keep track changing convert_ctx_access() and
converted_op_size from is_valid_access() as both are not at
the same location.
We can simplify the code a bit: check_ctx_access() becomes
simpler in that we only store ctx_field_size as a meta data
and later in convert_ctx_accesses() we fetch the target_size
right from the location where we do convert. Should the verifier
be misconfigured we do reject for BPF_WRITE cases or target_size
that are not provided. For the subsystems, we always work on
ranges in is_valid_access() and add small helpers for ranges
and narrow access, convert_ctx_accesses() sets target_size
for the relevant instruction.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Always try to parse an address, since kstrtoul() will safely fail when
given a symbol as input. If that fails (which will be the case for a
symbol), try to parse a symbol instead.
This allows creating a probe such as:
p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0
Which is necessary for this command to work:
perf probe -m 8021q -a vlan_gro_receive
Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net
Cc: stable@vger.kernel.org
Fixes: 413d37d1e ("tracing: Add kprobe-based event tracer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When doing the following command:
# echo ":mod:kvm_intel" > /sys/kernel/tracing/stack_trace_filter
it triggered a crash.
This happened with the clean up of probes. It required all callers to the
regex function (doing ftrace filtering) to have ops->private be a pointer to
a trace_array. But for the stack tracer, that is not the case.
Allow for the ops->private to be NULL, and change the function command
callbacks to handle the trace_array pointer being NULL as well.
Fixes: d2afd57a4b ("tracing/ftrace: Allow instances to have their own function probes")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Init boot up functions may be traced, but they are also freed when the
kernel finishes booting. These are removed from the ftrace tables, and the
debug variable for dyn_ftrace_total_info needs to reflect that as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the new_hash fails to allocate, then unlock the hash mutex on error.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Earlier patches introduced ability to record the tgid using the 'record-tgid'
option. Here we read the tgid and output it if the option is enabled.
Link: http://lkml.kernel.org/r/20170626053844.5746-3-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Tested-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Inorder to support recording of tgid, the following changes are made:
* Introduce a new API (tracing_record_taskinfo) to additionally record the tgid
along with the task's comm at the same time. This has has the benefit of not
setting trace_cmdline_save before all the information for a task is saved.
* Add a new API tracing_record_taskinfo_sched_switch to record task information
for 2 tasks at a time (previous and next) and use it from sched_switch probe.
* Preserve the old API (tracing_record_cmdline) and create it as a wrapper
around the new one so that existing callers aren't affected.
* Reuse the existing sched_switch and sched_wakeup probes to record tgid
information and add a new option 'record-tgid' to enable recording of tgid
When record-tgid option isn't enabled to being with, we take care to make sure
that there's isn't memory or runtime overhead.
Link: http://lkml.kernel.org/r/20170627020155.5139-1-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Tested-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The dyn_ftrace_total_info file is used to show how many functions have been
converted into nops and can be used by ftrace. The problem is that it does
not get decremented when functions are removed (init boot code being freed,
and modules being freed). That means the number is very inaccurate everytime
functions are removed from the ftrace tables. Decrement it when functions
are removed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace_arch_read_dyn_info() was used so that archs could add its own debug
information into the dyn_ftrace_total_info in the tracefs file system. That
file is for debugging usage of dynamic ftrace. No arch uses that function
anymore, so just get rid of it.
This also allows for tracing_read_dyn_info() to be cleaned up a bit.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
