Before this patch, if gfs2_ail_empty_gl saw there was nothing on
the ail list, it would return and not flush the log. The problem
is that there could still be a revoke for the rgrp sitting on the
sd_log_le_revoke list that's been recently taken off the ail list.
But that revoke still needs to be written, and the rgrp_go_inval
still needs to call log_flush_wait to ensure the revokes are all
properly written to the journal before we relinquish control of
the glock to another node. If we give the glock to another node
before we have this knowledge, the node might crash and its journal
replayed, in which case the missing revoke would allow the journal
replay to replay the rgrp over top of the rgrp we already gave to
another node, thus overwriting its changes and corrupting the
file system.
This patch makes gfs2_ail_empty_gl still call gfs2_log_flush rather
than returning.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the rgrp_go_inval and inode_go_inval functions each
checked if there were any items left on the ail count (by way of a
count), and if so, did a withdraw. But the withdraw code now uses
glocks when changing the file system to read-only status. So we can
not have glock functions withdrawing or a hang will likely result:
The glocks can't be serviced by the work_func if the work_func is
busy doing its own withdraw.
This patch removes the checks from the go_inval functions and adds
a centralized check in do_xmote to warn about the problem and not
withdraw, but flag the error so it's eventually caught when the logd
daemon eventually runs.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
When a node withdraws from a file system, it often leaves its journal
in an incomplete state. This is especially true when the withdraw is
caused by io errors writing to the journal. Before this patch, a
withdraw would try to write a "shutdown" record to the journal, tell
dlm it's done with the file system, and none of the other nodes
know about the problem. Later, when the problem is fixed and the
withdrawn node is rebooted, it would then discover that its own
journal was incomplete, and replay it. However, replaying it at this
point is almost guaranteed to introduce corruption because the other
nodes are likely to have used affected resource groups that appeared
in the journal since the time of the withdraw. Replaying the journal
later will overwrite any changes made, and not through any fault of
dlm, which was instructed during the withdraw to release those
resources.
This patch makes file system withdraws seen by the entire cluster.
Withdrawing nodes dequeue their journal glock to allow recovery.
The remaining nodes check all the journals to see if they are
clean or in need of replay. They try to replay dirty journals, but
only the journals of withdrawn nodes will be "not busy" and
therefore available for replay.
Until the journal replay is complete, no i/o related glocks may be
given out, to ensure that the replay does not cause the
aforementioned corruption: We cannot allow any journal replay to
overwrite blocks associated with a glock once it is held.
The "live" glock which is now used to signal when a withdraw
occurs. When a withdraw occurs, the node signals its withdraw by
dequeueing the "live" glock and trying to enqueue it in EX mode,
thus forcing the other nodes to all see a demote request, by way
of a "1CB" (one callback) try lock. The "live" glock is not
granted in EX; the callback is only just used to indicate a
withdraw has occurred.
Note that all nodes in the cluster must wait for the recovering
node to finish replaying the withdrawing node's journal before
continuing. To this end, it checks that the journals are clean
multiple times in a retry loop.
Also note that the withdraw function may be called from a wide
variety of situations, and therefore, we need to take extra
precautions to make sure pointers are valid before using them in
many circumstances.
We also need to take care when glocks decide to withdraw, since
the withdraw code now uses glocks.
Also, before this patch, if a process encountered an error and
decided to withdraw, if another process was already withdrawing,
the second withdraw would be silently ignored, which set it free
to unlock its glocks. That's correct behavior if the original
withdrawer encounters further errors down the road. But if
secondary waiters don't wait for the journal replay, unlocking
glocks will allow other nodes to use them, despite the fact that
the journal containing those blocks is being replayed. The
replay needs to finish before our glocks are released to other
nodes. IOW, secondary withdraws need to wait for the first
withdraw to finish.
For example, if an rgrp glock is unlocked by a process that didn't
wait for the first withdraw, a journal replay could introduce file
system corruption by replaying a rgrp block that has already been
granted to a different cluster node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We need to allow some glocks to be enqueued, dequeued, promoted, and demoted
when we're withdrawn. For example, to maintain metadata integrity, we should
disallow the use of inode and rgrp glocks when withdrawn. Other glocks, like
iopen or the transaction glocks may be safely used because none of their
metadata goes through the journal. So in general, we should disallow all
glocks with an address space, and allow all the others. One exception is:
we need to allow our active journal to be demoted so others may recover it.
Allowing glocks after withdraw gives us the ability to take appropriate
action (in a following patch) to have our journal properly replayed by
another node rather than just abandoning the current transactions and
pretending nothing bad happened, leaving the other nodes free to modify
the blocks we had in our journal, which may result in file system
corruption.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, the rgrp code had a serious problem related to
how it managed buffer_heads for resource groups. The problem caused
file system corruption, especially in cases of journal replay.
When an rgrp glock was demoted to transfer ownership to a
different cluster node, do_xmote() first calls rgrp_go_sync and then
rgrp_go_inval, as expected. When it calls rgrp_go_sync, that called
gfs2_rgrp_brelse() that dropped the buffer_head reference count.
In most cases, the reference count went to zero, which is right.
However, there were other places where the buffers are handled
differently.
After rgrp_go_sync, do_xmote called rgrp_go_inval which called
gfs2_rgrp_brelse a second time, then rgrp_go_inval's call to
truncate_inode_pages_range would get rid of the pages in memory,
but only if the reference count drops to 0.
Unfortunately, gfs2_rgrp_brelse was setting bi->bi_bh = NULL.
So when rgrp_go_sync called gfs2_rgrp_brelse, it lost the pointer
to the buffer_heads in cases where the reference count was still 1.
Therefore, when rgrp_go_inval called gfs2_rgrp_brelse a second time,
it failed the check for "if (bi->bi_bh)" and thus failed to call
brelse a second time. Because of that, the reference count on those
buffers sometimes failed to drop from 1 to 0. And that caused
function truncate_inode_pages_range to keep the pages in page cache
rather than freeing them.
The next time the rgrp glock was acquired, the metadata read of
the rgrp buffers re-used the pages in memory, which were now
wrong because they were likely modified by the other node who
acquired the glock in EX (which is why we demoted the glock).
This re-use of the page cache caused corruption because changes
made by the other nodes were never seen, so the bitmaps were
inaccurate.
For some reason, the problem became most apparent when journal
replay forced the replay of rgrps in memory, which caused newer
rgrp data to be overwritten by the older in-core pages.
A big part of the problem was that the rgrp buffer were released
in multiple places: The go_unlock function would release them when
the glock was released rather than when the glock is demoted,
which is clearly wrong because our intent was to cache them until
the glock is demoted from SH or EX.
This patch attempts to clean up the mess and make one consistent
and centralized mechanism for managing the rgrp buffer_heads by
implementing several changes:
1. It eliminates the call to gfs2_rgrp_brelse() from rgrp_go_sync.
We don't want to release the buffers or zero the pointers when
syncing for the reasons stated above. It only makes sense to
release them when the glock is actually invalidated (go_inval).
And when we do, then we set the bh pointers to NULL.
2. The go_unlock function (which was only used for rgrps) is
eliminated, as we've talked about doing many times before.
The go_unlock function was called too early in the glock dq
process, and should not happen until the glock is invalidated.
3. It also eliminates the call to rgrp_brelse in gfs2_clear_rgrpd.
That will now happen automatically when the rgrp glocks are
demoted, and shouldn't happen any sooner or later than that.
Instead, function gfs2_clear_rgrpd has been modified to demote
the rgrp glocks, and therefore, free those pages, before the
remaining glocks are culled by gfs2_gl_hash_clear. This
prevents the gl_object from hanging around when the glocks are
culled.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Split gfs2_lm_withdraw into a function that prints an error message and a
function that withdraws the filesystem.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Every caller of function gfs2_struct2blk specified sizeof(u64).
This patch eliminates the unnecessary parameter and replaces the
size calculation with a new superblock variable that is computed
to be the maximum number of block pointers we can fit inside a
log descriptor, as is done for pointers per dinode and indirect
block.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add function gfs2_withdrawn and replace all checks for the SDF_WITHDRAWN
bit to call it. This does not change the logic or function of gfs2, and
it facilitates later improvements to the withdraw sequence.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
There is use of unnecessary semicolon after switch case.
Removed the semicolon.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch replaces a few leftover printk errors with calls to
fs_info and similar, so that the file system having the error is
properly logged.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, if a glock error was encountered, the glock with
the problem was dumped. But sometimes you may have lots of file systems
mounted, and that doesn't tell you which file system it was for.
This patch adds a new boolean parameter fsid to the dump_glock family
of functions. For non-error cases, such as dumping the glocks debugfs
file, the fsid is not dumped in order to keep lock dumps and glocktop
as clean as possible. For all error cases, such as GLOCK_BUG_ON, the
file system id is now printed. This will make it easier to debug.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the superblock flag indicating when a file system
is withdrawn was called SDF_SHUTDOWN. This patch simply renames it to
the more obvious SDF_WITHDRAWN.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Based on 1 normalized pattern(s):
this copyrighted material is made available to anyone wishing to use
modify copy or redistribute it subject to the terms and conditions
of the gnu general public license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 44 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use bios to read in the journal into the address space of the journal inode
(jd_inode), sequentially and in large chunks. This is faster for locating the
journal head that the previous binary search approach. When performing
recovery, we keep the journal in the address space until recovery is done,
which further speeds up things.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This reverts commit 2a5f14f279.
This patch causes xfstests generic/311 to fail. Reverting this for
now until we have a proper fix.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is based on an idea from Steve Whitehouse. The idea is
to dump the number of pages for inodes in the glock dumps.
The additional locking required me to drop const from quite a few
places.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Use bio(s) to read in the journal sequentially in large chunks and
locate the head of the journal.
This version addresses the issues Christoph pointed out w.r.t error handling
and using deprecated API.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
This patch just adds the capability for GFS2 to track which function
called gfs2_log_flush. This should make it easier to diagnose
problems based on the sequence of events found in the journals.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch adds a new structure called gfs2_log_header_v2 which is used
to store expanded fields into previously unused areas of the log headers
(i.e., this change is backwards compatible). Some of these are used for
debug purposes so we can backtrack when problems occur. Others are
reserved for future expansion.
This patch is based on a prototype from Steve Whitehouse.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
Remove gfs2_set_nlink which prevents the link count of an inode from
becoming non-zero once it has reached zero. The next commit reduces the
amount of waiting on glocks when an inode is evicted from memory. With
that, an inode can become reallocated before all the remote-unlink
callbacks from a previous delete are processed, which causes the link
count to change from zero to non-zero.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In inode_go_lock() function, the parameter order of list_add() is error.
According to the define of list_add(), the first parameter is new entry
and the second is the list head, so ip->i_trunc_list should be the
first parameter and the sdp->sd_trunc_list should be second.
Signed-off-by: Wang Xibo<wang.xibo@zte.com.cn>
Signed-off-by: Xiao Likun<xiao.likun@zte.com.cn>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
Put all remaining accesses to gl->gl_object under the
gl->gl_lockref.lock spinlock to prevent races.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
So far, gfs2_evict_inode clears gl->gl_object and then flushes the glock
work queue to make sure that inode glops which dereference gl->gl_object
have finished running before the inode is destroyed. However, flushing
the work queue may do more work than needed, and in particular, it may
call into DLM, which we want to avoid here. Use a bit lock
(GIF_GLOP_PENDING) to synchronize between the inode glops and
gfs2_evict_inode instead to get rid of the flushing.
In addition, flush the work queues of existing glocks before reusing
them for new inodes to get those glocks into a known state: the glock
state engine currently doesn't handle glock re-appropriation correctly.
(We may be able to fix the glock state engine instead later.)
Based on a patch by Steven Whitehouse <swhiteho@redhat.com>.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function inode_go_demote_ok had some code that was only executed
if gl_holders was not empty. However, if gl_holders was not empty,
the only caller, demote_ok(), returns before inode_go_demote_ok
would ever be called. Therefore, it's dead code, so I removed it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
When gfs2 releases the glock of an inode, it must invalidate all
information cached for that inode, including the page cache and acls.
Use the new security_inode_invalidate_secctx hook to also invalidate
security labels in that case. These items will be reread from disk
when needed after reacquiring the glock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
[PM: fixed spelling errors and description line lengths]
Signed-off-by: Paul Moore <pmoore@redhat.com>
Commit e66cf161 replaced the gl_spin spinlock in struct gfs2_glock with a
gl_lockref lockref and defined gl_spin as gl_lockref.lock (the spinlock in
gl_lockref). Remove that define to make the references to gl_lockref.lock more
obvious.
Signed-off-by: Andreas Gruenbacher <andreas.gruenbacher@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
What uniquely identifies a glock in the glock hash table is not
gl_name, but gl_name and its superblock pointer. This patch makes
the gl_name field correspond to a unique glock identifier. That will
allow us to simplify hashing with a future patch, since the hash
algorithm can then take the gl_name and hash its components in one
operation.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
This patch allows the block allocation code to retain the buffers
for the resource groups so they don't need to be re-read from buffer
cache with every request. This is a performance improvement that's
especially noticeable when resource groups are very large. For
example, with 2GB resource groups and 4K blocks, there can be 33
blocks for every resource group. This patch allows those 33 buffers
to be kept around and not read in and thrown away with every
operation. The buffers are released when the resource group is
either synced or invalidated.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
The glocks used for resource groups often come and go hundreds of
thousands of times per second. Adding them to the lru list just
adds unnecessary contention for the lru_lock spin_lock, especially
considering we're almost certainly going to re-use the glock and
take it back off the lru microseconds later. We never want the
glock shrinker to cull them anyway. This patch adds a new bit in
the glops that determines which glock types get put onto the lru
list and which ones don't.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
The current gfs2 freezing code is considerably more complicated than it
should be because it doesn't use the vfs freezing code on any node except
the one that begins the freeze. This is because it needs to acquire a
cluster glock before calling the vfs code to prevent a deadlock, and
without the new freeze_super and thaw_super hooks, that was impossible. To
deal with the issue, gfs2 had to do some hacky locking tricks to make sure
that a frozen node couldn't be holding on a lock it needed to do the
unfreeze ioctl.
This patch makes use of the new hooks to simply the gfs2 locking code. Now,
all the nodes in the cluster freeze and thaw in exactly the same way. Every
node in the cluster caches the freeze glock in the shared state. The new
freeze_super hook allows the freezing node to grab this freeze glock in
the exclusive state without first calling the vfs freeze_super function.
All the nodes in the cluster see this lock change, and call the vfs
freeze_super function. The vfs locking code guarantees that the nodes can't
get stuck holding the glocks necessary to unfreeze the system. To
unfreeze, the freezing node uses the new thaw_super hook to drop the freeze
glock. Again, all the nodes notice this, reacquire the glock in shared mode
and call the vfs thaw_super function.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
It is probably also the first one without a single patch from me. That
is down to a combination of factors, and I have some things in the works
that are not quite ready yet, that I hope to put in next time around.
Returning to what is here this time... we have 3 patches which fix
various warnings. Two are bug fixes (for quotas and also a
rare recovery race condition). The final patch, from Ben Marzinski,
is an important change in the freeze code which has been in
progress for some time. This removes the need to take and drop the
transaction lock for every single transaction, when the only time it
was used, was at file system freeze time. Ben's patch integrates the
freeze operation into the journal flush code as an alternative with
lower overheads and also lands up resolving some difficult to fix races
at the same time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=x9iK
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw into next
Pull gfs2 updates from Steven Whitehouse:
"This must be about the smallest merge window patch set ever for GFS2.
It is probably also the first one without a single patch from me.
That is down to a combination of factors, and I have some things in
the works that are not quite ready yet, that I hope to put in next
time around.
Returning to what is here this time... we have 3 patches which fix
various warnings. Two are bug fixes (for quotas and also a rare
recovery race condition). The final patch, from Ben Marzinski, is an
important change in the freeze code which has been in progress for
some time. This removes the need to take and drop the transaction
lock for every single transaction, when the only time it was used, was
at file system freeze time. Ben's patch integrates the freeze
operation into the journal flush code as an alternative with lower
overheads and also lands up resolving some difficult to fix races at
the same time"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Prevent recovery before the local journal is set
GFS2: fs/gfs2/file.c: kernel-doc warning fixes
GFS2: fs/gfs2/bmap.c: kernel-doc warning fixes
GFS2: remove transaction glock
GFS2: lops.c: replace 0 by NULL for pointers
GFS2: quotas not being refreshed in gfs2_adjust_quota
GFS2 has a transaction glock, which must be grabbed for every
transaction, whose purpose is to deal with freezing the filesystem.
Aside from this involving a large amount of locking, it is very easy to
make the current fsfreeze code hang on unfreezing.
This patch rewrites how gfs2 handles freezing the filesystem. The
transaction glock is removed. In it's place is a freeze glock, which is
cached (but not held) in a shared state by every node in the cluster
when the filesystem is mounted. This lock only needs to be grabbed on
freezing, and actions which need to be safe from freezing, like
recovery.
When a node wants to freeze the filesystem, it grabs this glock
exclusively. When the freeze glock state changes on the nodes (either
from shared to unlocked, or shared to exclusive), the filesystem does a
special log flush. gfs2_log_flush() does all the work for flushing out
the and shutting down the incore log, and then it tries to grab the
freeze glock in a shared state again. Since the filesystem is stuck in
gfs2_log_flush, no new transaction can start, and nothing can be written
to disk. Unfreezing the filesytem simply involes dropping the freeze
glock, allowing gfs2_log_flush() to grab and then release the shared
lock, so it is cached for next time.
However, in order for the unfreezing ioctl to occur, gfs2 needs to get a
shared lock on the filesystem root directory inode to check permissions.
If that glock has already been grabbed exclusively, fsfreeze will be
unable to get the shared lock and unfreeze the filesystem.
In order to allow the unfreeze, this patch makes gfs2 grab a shared lock
on the filesystem root directory during the freeze, and hold it until it
unfreezes the filesystem. The functions which need to grab a shared
lock in order to allow the unfreeze ioctl to be issued now use the lock
grabbed by the freeze code instead.
The freeze and unfreeze code take care to make sure that this shared
lock will not be dropped while another process is using it.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Over time, we hope to be able to improve the concurrency available
in the log code. This is one small step towards that, by moving
the buffer lists from the super block, and into the transaction
structure, so that each transaction builds its own buffer lists.
At transaction commit time, the buffer lists are merged into
the currently accumulating transaction. That transaction then
is passed into the before and after commit functions at journal
flush time. Thus there should be no change in overall behaviour
yet.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Al Viro has tactfully pointed out that we are using the incorrect
error code in some cases. This patch fixes that, and also removes
the (unused) return value for glock dumping.
> * gfs2_iget() - ENOBUFS instead of ENOMEM. ENOBUFS is
> "No buffer space available (POSIX.1 (XSI STREAMS option))" and since
> we don't support STREAMS it's probably fair game, but... what the hell?
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Prior to this patch, GFS2 had one address space for each rgrp,
stored in the glock. This patch changes them to use a single
address space in the super block. This therefore saves
(sizeof(struct address_space) * nr_of_rgrps) bytes of memory
and for large filesystems, that can be significant.
It would be nice to be able to do something similar and merge
the inode metadata address space into the same global
address space. However, that is rather more complicated as the
on-disk location doesn't have a 1:1 mapping with the inodes in
general. So while it could be done, it will be a more complicated
operation as it requires changing a lot more code paths.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Each rgrp header is represented as a single extent on disk, so we
can calculate the position within the address space, since we are
using address spaces mapped 1:1 to the disk. This means that it
is possible to use the range based versions of filemap_fdatawrite/wait
and for invalidating the page cache.
Our eventual intent is to then be able to merge the address spaces
used for rgrps into a single address space, rather than to have
one for each glock, saving memory and reducing complexity.
Since during umount, the rgrp structures are disposed of before
the glocks, we need to store the extent information in the glock
so that is is available for a final invalidation. This patch uses
a field which is otherwise unused in rgrp glocks to do that, so
that we do not have to expand the size of a glock.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We need to wait for any outstanding DIO to complete in a couple
of situations. Firstly, in case we are changing out of deferred
mode (in inode_go_sync) where GLF_DIRTY will not be set. That
call could be prefixed with a test for gl_state == LM_ST_DEFERRED
but it doesn't seem worth it bearing in mind that the test for
outstanding DIO is very quick anyway, in the usual case that there
is none.
The second case is in inode_go_lock which will catch the cases
where we have a cached EX lock, but where we grant deferred locks
against it so that there is no glock state transistion. We only
need to wait if the state is not deferred, since DIO is valid
anyway in that state.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Currently glocks have an atomic reference count and also a spinlock
which covers various internal fields, such as the state. This intent of
this patch is to replace the spinlock and the atomic reference count
with a lockref structure. This contains a spinlock which we can continue
to use as before, and a reference counter which is used in conjuction
with the spinlock to replace the previous atomic counter.
As a result of this there are some new rules for reference counting on
glocks. We need to distinguish between reference count changes under
gl_spin (which are now just increment or decrement of the new counter,
provided the count cannot hit zero) and those which are outside of
gl_spin, but which now take gl_spin internally.
The conversion is relatively straight forward. There is probably some
further clean up which can be done, but the priority at this stage is to
make the change in as simple a manner as possible.
A consequence of this change is that the reference count is being
decoupled from the lru list processing. This should allow future
adoption of the lru_list code with glocks in due course.
The reason for using the "dead" state and not just relying on 0 being
the "invalid state" is so that in due course 0 ref counts can be
allowable. The intent is to eventually be able to remove the ref count
changes which are currently hidden away in state_change().
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When run during fsync, a gfs2_log_flush could happen between the
time when gfs2_ail_flush checked the number of blocks to revoke,
and when it actually started the transaction to do those revokes.
This occassionally caused it to need more revokes than it reserved,
causing gfs2 to crash.
Instead of just reserving enough revokes to handle the blocks that
currently need them, this patch makes gfs2_ail_flush reserve the
maximum number of revokes it can, without increasing the total number
of reserved log blocks. This patch also passes the number of reserved
revokes to __gfs2_ail_flush() so that it doesn't go over its limit
and cause a crash like we're seeing. Non-fsync calls to __gfs2_ail_flush
will still cause a BUG() necessary revokes are skipped.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch looks at all the outstanding blocks in all the transactions
on the log, and moves the completed ones to the ail2 list. Then it
issues revokes for these blocks. This will hopefully speed things up
in situations where there is a lot of contention for glocks, especially
if they are acquired serially.
revoke_lo_before_commit will issue at most one log block's full of these
preemptive revokes. The amount of reserved log space that
gfs2_log_reserve() ignores has been incremented to allow for this extra
block.
This patch also consolidates the common revoke instructions into one
function, gfs2_add_revoke().
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds a bool indicating whether the demote
request was originated locally or remotely. This is then
used by the iopen ->go_callback() to make 100% sure that
it will only respond to remote callbacks.
Since ->evict_inode() uses GL_NOCACHE when it attempts to
get an exclusive lock on the iopen lock, this may result
in extra scheduling of the workqueue in case that the
exclusive promotion request failed. This patch prevents
that from happening.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When reading dinodes from the disk convert uids and gids
into kuids and kgids to store in vfs data structures.
When writing to dinodes to the disk convert kuids and kgids
in the in memory structures into plain uids and gids.
For now all on disk data structures are assumed to be
stored in the initial user namespace.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Save the effort of allocating, reading and writing
the lvb for most glocks that do not use it.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
[Editorial: This is a nit, but has been a minor irritation for a long time:]
This patch renames glops structure item for go_xmote_th to go_sync.
The functionality is unchanged; it's just for readability.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
