rx_refill_timer should be deleted as soon as we disconnect from the
backend since otherwise it is possible for the timer to go off before
we get to xennet_destroy_queues(). If this happens we may dereference
queue->rx.sring which is set to NULL in xennet_disconnect_backend().
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a USB-to-serial adapter is unplugged, the driver re-initializes, with
dev->hard_header_len and dev->addr_len set to zero, instead of the correct
values. If then a packet is sent through the half-dead interface, the
kernel will panic due to running out of headroom in the skb when pushing
for the AX.25 headers resulting in this panic:
[<c0595468>] (skb_panic) from [<c0401f70>] (skb_push+0x4c/0x50)
[<c0401f70>] (skb_push) from [<bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25])
[<bf0bdad4>] (ax25_hard_header [ax25]) from [<bf0d05d4>] (ax_header+0x38/0x40 [mkiss])
[<bf0d05d4>] (ax_header [mkiss]) from [<c041b584>] (neigh_compat_output+0x8c/0xd8)
[<c041b584>] (neigh_compat_output) from [<c043e7a8>] (ip_finish_output+0x2a0/0x914)
[<c043e7a8>] (ip_finish_output) from [<c043f948>] (ip_output+0xd8/0xf0)
[<c043f948>] (ip_output) from [<c043f04c>] (ip_local_out_sk+0x44/0x48)
This patch makes mkiss behave like the 6pack driver. 6pack does not
panic. In 6pack.c sp_setup() (same function name here) the values for
dev->hard_header_len and dev->addr_len are set to the same values as in
my mkiss patch.
[ralf@linux-mips.org: Massages original submission to conform to the usual
standards for patch submissions.]
Signed-off-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the device being used to DMA map skb->data.
Erroneous device assignment causes the crash when SMMU is enabled.
This happens during TX since buffer gets DMA mapped with device
correspondign to net_device and gets unmapped using the device
related to DSAF.
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- keystone: Fix scheduling while atomic for realtime
- mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
-----BEGIN PGP SIGNATURE-----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=zi4v
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-4.10' of git://git.infradead.org/users/jcooper/linux into irq/urgent
Pull irqchip fixes for v4.10 from Jason Cooper
- keystone: Fix scheduling while atomic for realtime
- mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
CONFIG_KASAN=y needs a lot of virtual memory mapped for its shadow.
In that case ptdump_walk_pgd_level_core() takes a lot of time to
walk across all page tables and doing this without
a rescheduling causes soft lockups:
NMI watchdog: BUG: soft lockup - CPU#3 stuck for 23s! [swapper/0:1]
...
Call Trace:
ptdump_walk_pgd_level_core+0x40c/0x550
ptdump_walk_pgd_level_checkwx+0x17/0x20
mark_rodata_ro+0x13b/0x150
kernel_init+0x2f/0x120
ret_from_fork+0x2c/0x40
I guess that this issue might arise even without KASAN on huge machines
with several terabytes of RAM.
Stick cond_resched() in pgd loop to fix this.
Reported-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Alexander Potapenko <glider@google.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170210095405.31802-1-aryabinin@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When the TSC is marked reliable then the synchronization check is skipped,
but that also skips the TSC ADJUST sanitizing code. So on a machine with a
wreckaged BIOS the TSC deviation between CPUs might go unnoticed.
Let the TSC adjust sanitizing code run unconditionally and just skip the
expensive synchronization checks when TSC is marked reliable.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Olof Johansson <olof@lixom.net>
Link: http://lkml.kernel.org/r/20170209151231.491189912@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Olof reported that on a machine which has a BIOS wreckaged TSC the
timestamps in dmesg are making a large jump because the TSC value is
jumping forward after resetting the TSC ADJUST register to a sane value.
This can be avoided by calling the TSC ADJUST saniziting function before
initializing the per cpu sched clock machinery. That takes the offset into
account and avoid the time jump.
What cannot be avoided is that the 'Firmware Bug' warnings on the secondary
CPUs are printed with the large time offsets because it would be too much
effort and ugly hackery to print those warnings into a buffer and emit them
after the adjustemt on the starting CPUs. It's a firmware bug and should be
fixed in firmware. The weird timestamps are collateral damage and just
illustrate the sillyness of the BIOS folks:
[ 0.397445] smp: Bringing up secondary CPUs ...
[ 0.402100] x86: Booting SMP configuration:
[ 0.406343] .... node #0, CPUs: #1
[1265776479.930667] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU1: -2978888639183101
[1265776479.944664] TSC ADJUST synchronize: Reference CPU0: 0 CPU1: -2978888639183101
[ 0.508119] #2
[1265776480.032346] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU2: -2978888639183677
[1265776480.044192] TSC ADJUST synchronize: Reference CPU0: 0 CPU2: -2978888639183677
[ 0.607643] #3
[1265776480.131874] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU3: -2978888639184530
[1265776480.143720] TSC ADJUST synchronize: Reference CPU0: 0 CPU3: -2978888639184530
[ 0.707108] smp: Brought up 1 node, 4 CPUs
[ 0.711271] smpboot: Total of 4 processors activated (21698.88 BogoMIPS)
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170209151231.411460506@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
ts->next_tick keeps track of the next tick deadline in order to optimize
clock programmation on irq exit and avoid redundant clock device writes.
Now if ts->next_tick missed an update, we may spuriously miss a clock
reprog later as the nohz code is fooled by an obsolete next_tick value.
This is what happens here on a specific path: when we observe an
expired timer from the nohz update code on irq exit, we perform a soft
tick restart which simply fires the closest possible tick without
actually exiting the nohz mode and restoring a periodic state. But we
forget to update ts->next_tick accordingly.
As a result, after the next tick resulting from such soft tick restart,
the nohz code sees a stale value on ts->next_tick which doesn't match
the clock deadline that just expired. If that obsolete ts->next_tick
value happens to collide with the actual next tick deadline to be
scheduled, we may spuriously bypass the clock reprogramming. In the
worst case, the tick may never fire again.
Fix this with a ts->next_tick reset on soft tick restart.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed: Wanpeng Li <wanpeng.li@hotmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1486485894-29173-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Alexei had his box explode because doing read() on a package
(rapl/uncore) event that isn't currently scheduled in ends up doing an
out-of-bounds load.
Rework the code to more explicitly deal with event->oncpu being -1.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Fixes: d6a2f9035b ("perf/core: Introduce PMU_EV_CAP_READ_ACTIVE_PKG")
Link: http://lkml.kernel.org/r/20170131102710.GL6515@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch incorrectly attempted nested mnt_want_write, and incorrectly
disabled nfsd's owner override for truncate. We'll fix those problems
and make another attempt soon, for the moment I think the safest is to
revert.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----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=qJxc
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.10-rc8' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This should be the final set of drm fixes for 4.10: one vmwgfx boot
fix, one vc4 fix, and a few i915 fixes:
* tag 'drm-fixes-for-v4.10-rc8' of git://people.freedesktop.org/~airlied/linux:
drm: vc4: adapt to new behaviour of drm_crtc.c
drm/i915: Always convert incoming exec offsets to non-canonical
drm/i915: Remove overzealous fence warn on runtime suspend
drm/i915/bxt: Add MST support when do DPLL calculation
drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
drm/i915: fix i915 running as dom0 under Xen
drm/i915: Flush untouched framebuffers before display on !llc
drm/i915: fix use-after-free in page_flip_completed()
drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format
Dan Carpenter kindly reported:
<quote>
The patch d27a7cb919: "zfcp: trace on request for open and close of
WKA port" from Aug 10, 2016, leads to the following static checker
warning:
drivers/s390/scsi/zfcp_fsf.c:1615 zfcp_fsf_open_wka_port()
warn: 'req' was already freed.
drivers/s390/scsi/zfcp_fsf.c
1609 zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
1610 retval = zfcp_fsf_req_send(req);
1611 if (retval)
1612 zfcp_fsf_req_free(req);
^^^
Freed.
1613 out:
1614 spin_unlock_irq(&qdio->req_q_lock);
1615 if (req && !IS_ERR(req))
1616 zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req->req_id);
^^^^^^^^^^^
Use after free.
1617 return retval;
1618 }
Same thing for zfcp_fsf_close_wka_port() as well.
</quote>
Rather than relying on req being NULL (or ERR_PTR) for all cases where
we don't want to trace or should not trace,
simply check retval which is unconditionally initialized with -EIO != 0
and it can only become 0 on successful retval = zfcp_fsf_req_send(req).
With that we can also remove the then again unnecessary unconditional
initialization of req which was introduced with that earlier commit.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: d27a7cb919 ("zfcp: trace on request for open and close of WKA port")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit 78cbccd3bd ("aacraid: Fix for KDUMP driver hang")
caused a problem on older controllers which do not support MSI-x (namely
ASR3405,ASR3805). This patch conditionalizes the previous patch to
controllers which support MSI-x
Cc: <stable@vger.kernel.org> # v4.7+
Fixes: 78cbccd3bd ("aacraid: Fix for KDUMP driver hang")
Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hopefully final fixes for v4.10, about half of them stable material.
* tag 'drm-intel-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Always convert incoming exec offsets to non-canonical
drm/i915: Remove overzealous fence warn on runtime suspend
drm/i915/bxt: Add MST support when do DPLL calculation
drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
drm/i915: fix i915 running as dom0 under Xen
drm/i915: Flush untouched framebuffers before display on !llc
drm/i915: fix use-after-free in page_flip_completed()
Last-minute vc4 fix for 4.10.
* tag 'drm-misc-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc:
drm: vc4: adapt to new behaviour of drm_crtc.c
MPI2 controllers sometimes got lost (i.e. disappear from
/sys/bus/pci/devices) if ASMP is enabled.
Signed-off-by: Slava Kardakov <ojab@ojab.ru>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60644
Cc: <stable@vger.kernel.org>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
USB PHYs need the MDIO clock divisor enabled earlier to work.
Initialize mdio clock divisor in probe function. The ext bus
bit available in the same register will be used by mdio mux
to enable external mdio.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function igmpv3/mld_add_delrec() we allocate pmc and put it in
idev->mc_tomb, so we should free it when we don't need it in del_delrec().
But I removed kfree(pmc) incorrectly in latest two patches. Now fix it.
Fixes: 24803f38a5 ("igmp: do not remove igmp souce list info when ...")
Fixes: 1666d49e1d ("mld: do not remove mld souce list info when ...")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a crash when running out of grant refs when creating many
queues across many netdevs.
* If creating queues fails (i.e. there are no grant refs available),
call xenbus_dev_fatal() to ensure that the xenbus device is set to the
closed state.
* If no queues are created, don't call xennet_disconnect_backend as
netdev->real_num_tx_queues will not have been set correctly.
* If setup_netfront() fails, ensure that all the queues created are
cleaned up, not just those that have been set up.
* If any queues were set up and an error occurs, call
xennet_destroy_queues() to clean up the napi context.
* If any fatal error occurs, unregister and destroy the netdev to avoid
leaving around a half setup network device.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Brüns says:
====================
Fixes for sierra_net driver
When trying to initiate a dual-stack (ipv4v6) connection, a MC7710, FW
version SWI9200X_03.05.24.00ap answers with an unsupported LSI. Add support
for this LSI.
Also the link_type should be ignored when going idle, otherwise the modem
is stuck in a bad link state.
Tested on MC7710, T-Mobile DE, APN internet.telekom, IPv4v6 PDP type. Both
IPv4 and IPv6 connections work.
v2: Do not overwrite protocol field in rx_fixup
v3: Remove leftover struct ethhdr *eth declaration
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the context is deactivated, the link_type is set to 0xff, which
triggers a warning message, and results in a wrong link status, as
the LSI is ignored.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a context is configured as dualstack ("IPv4v6"), the modem indicates
the context activation with a slightly different indication message.
The dual-stack indication omits the link_type (IPv4/v6) and adds
additional address fields.
IPv6 LSIs are identical to IPv4 LSIs, but have a different link type.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry reported a kernel warning:
WARNING: CPU: 3 PID: 2936 at net/kcm/kcmsock.c:627
kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627
CPU: 3 PID: 2936 Comm: a.out Not tainted 4.10.0-rc6+ #209
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
panic+0x1fb/0x412 kernel/panic.c:179
__warn+0x1c4/0x1e0 kernel/panic.c:539
warn_slowpath_null+0x2c/0x40 kernel/panic.c:582
kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627
kcm_sendmsg+0x163a/0x2200 net/kcm/kcmsock.c:1029
sock_sendmsg_nosec net/socket.c:635 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:645
sock_write_iter+0x326/0x600 net/socket.c:848
new_sync_write fs/read_write.c:499 [inline]
__vfs_write+0x483/0x740 fs/read_write.c:512
vfs_write+0x187/0x530 fs/read_write.c:560
SYSC_write fs/read_write.c:607 [inline]
SyS_write+0xfb/0x230 fs/read_write.c:599
entry_SYSCALL_64_fastpath+0x1f/0xc2
when calling syscall(__NR_write, sock2, 0x208aaf27ul, 0x0ul) on a KCM
seqpacket socket. It appears that kcm_sendmsg() does not handle len==0
case correctly, which causes an empty skb is allocated and queued.
Fix this by skipping the skb allocation for len==0 case.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 90c311b0ee ("xen-netfront: Fix Rx stall during network
stress and OOM") caused the refill timer to be triggerred almost on
all invocations of xennet_alloc_rx_buffers for certain workloads.
This reworks the fix by reverting to the old behaviour and taking into
consideration the skb allocation failure. Refill timer is now triggered
on insufficient requests or skb allocation failure.
Signed-off-by: Vineeth Remanan Pillai <vineethp@amazon.com>
Fixes: 90c311b0ee (xen-netfront: Fix Rx stall during network stress and OOM)
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SCSI target fixes from Nicholas Bellinger:
"This target series for v4.10 contains fixes which address a few
long-standing bugs that DATERA's QA + automation teams have uncovered
while putting v4.1.y target code into production usage.
We've been running the top three in our nightly automated regression
runs for the last two months, and the COMPARE_AND_WRITE fix Mr. Gary
Guo has been manually verifying against a four node ESX cluster this
past week.
Note all of them have CC' stable tags.
Summary:
- Fix a bug with ESX EXTENDED_COPY + SAM_STAT_RESERVATION_CONFLICT
status, where target_core_xcopy.c logic was incorrectly returning
SAM_STAT_CHECK_CONDITION for all non SAM_STAT_GOOD cases (Nixon
Vincent)
- Fix a TMR LUN_RESET hung task bug while other in-flight TMRs are
being aborted, before the new one had been dispatched into tmr_wq
(Rob Millner)
- Fix a long standing double free OOPs, where a dynamically generated
'demo-mode' NodeACL has multiple sessions associated with it, and
the /sys/kernel/config/target/$FABRIC/$WWN/ subsequently disables
demo-mode, but never converts the dynamic ACL into a explicit ACL
(Rob Millner)
- Fix a long standing reference leak with ESX VAAI COMPARE_AND_WRITE
when the second phase WRITE COMMIT command fails, resulting in
CHECK_CONDITION response never being sent and se_cmd->cmd_kref
never reaching zero (Gary Guo)
Beyond these items on v4.1.y we've reproduced, fixed, and run through
our regression test suite using iscsi-target exports, there are two
additional outstanding list items:
- Remove a >= v4.2 RCU conversion BUG_ON that would trigger when
dynamic node NodeACLs where being converted to explicit NodeACLs.
The patch drops the BUG_ON to follow how pre RCU conversion worked
for this special case (Benjamin Estrabaud)
- Add ibmvscsis target_core_fabric_ops->max_data_sg_nent assignment
to match what IBM's Virtual SCSI hypervisor is already enforcing at
transport layer. (Bryant Ly + Steven Royer)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
ibmvscsis: Add SGL limit
target: Fix COMPARE_AND_WRITE ref leak for non GOOD status
target: Fix multi-session dynamic se_node_acl double free OOPs
target: Fix early transport_generic_handle_tmr abort scenario
target: Use correct SCSI status during EXTENDED_COPY exception
target: Don't BUG_ON during NodeACL dynamic -> explicit conversion
The Generic PHY drivers gets assigned after we checked that the current
PHY driver is NULL, so we need to check a few things before we can
safely dereference d->driver. This would be causing a NULL deference to
occur when a system binds to the Generic PHY driver. Update
phy_attach_direct() to do the following:
- grab the driver module reference after we have assigned the Generic
PHY drivers accordingly, and remember we came from the generic PHY
path
- update the error path to clean up the module reference in case the
Generic PHY probe function fails
- split the error path involving phy_detacht() to avoid double free/put
since phy_detach() does all the clean up
- finally, have phy_detach() drop the module reference count before we
call device_release_driver() for the Generic PHY driver case
Fixes: cafe8df8b9 ("net: phy: Fix lack of reference count on PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=uxqv
-----END PGP SIGNATURE-----
Merge tag 'pstore-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore fix from Kees Cook:
"Fix pstore regression (boot Oops) when ftrace disabled, from Brian
Norris"
* tag 'pstore-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: don't OOPS when there are no ftrace zones
Pull input fixes from Dmitry Torokhov:
"A fix for a crash in uinput, and a fix for build errors when HID-RMI
is built-in but SERIO is a module"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - select 'SERIO' when needed
Input: uinput - fix crash when mixing old and new init style
We'll OOPS in ramoops_get_next_prz() if the platform didn't ask for any
ftrace zones (i.e., cxt->fprzs will be NULL). Let's just skip this
entire FTRACE section if there's no 'fprzs'.
Regression seen on a coreboot/depthcharge-based Chromebook.
Fixes: 2fbea82bbb ("pstore: Merge per-CPU ftrace records into one")
Cc: Joel Fernandes <joelaf@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
- Fix regression in attaching groups to existing container for
SPAPR IOMMU backend (Alexey Kardashevskiy)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=iCg7
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.10-final' of git://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
"Fix regression in attaching groups to existing container for SPAPR
IOMMU backend (Alexey Kardashevskiy)"
* tag 'vfio-v4.10-final' of git://github.com/awilliam/linux-vfio:
vfio/spapr_tce: Set window when adding additional groups to container
Pull ARM fixes from Russell King:
"A couple more fixes for 4.10:
- fix addressing the short regset write issue (Dave Martin)
- fix for LPAE systems which leave a pending imprecise data abort
before entering the kernel (Alexander Sverdlin)"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write
ARM: 8642/1: LPAE: catch pending imprecise abort on unmask
SMBSLVCNT must be protected with the piix4_mutex_sb800 in order to avoid
multiple buses accessing to the semaphore at the same time.
Fixes: 701dc207bf ("i2c: piix4: Avoid race conditions with IMC")
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Since '701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")' we
are using the SMBSLVCNT register at offset 0x8. We need to request it.
Fixes: 701dc207bf ("i2c: piix4: Avoid race conditions with IMC")
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Without this change, the HDMI/DP codec will be recognised as a
generic codec, and there is no sound when playing through this codec.
As suggested by NVidia side, after adding the new ID in the driver,
the sound playing works well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Otherwise KVM will fail to pass them through to the host
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The IPIs come in as HVI not EE, so we need to test the appropriate
SRR1 bits. The encoding is such that it won't have false positives
on P7 and P8 so we can just test it like that. We also need to handle
the icp-opal variant of the flush.
Fixes: d74361881f ("powerpc/xics: Add ICP OPAL backend")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Three tiny changes to the ERAT flushing logic: First don't make
it depend on DD1. It hasn't been decided yet but we might run
DD2 in a mode that also requires explicit flushes for performance
reasons so make it unconditional. We also add a missing isync, and
finally remove the flush from _tlbiel_va as it is only necessary
for congruence-class invalidations (PID, LPID and full TLB), not
targetted invalidations.
Fixes: 96ed1fe511 ("powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reverts commit 020eb3daab.
Gabriel C reports that it causes his machine to not boot, and we haven't
tracked down the reason for it yet. Since the bug it fixes has been
around for a longish time, we're better off reverting the fix for now.
Gabriel says:
"It hangs early and freezes with a lot RCU warnings.
I bisected it down to :
> Ruslan Ruslichenko (1):
> x86/ioapic: Restore IO-APIC irq_chip retrigger callback
Reverting this one fixes the problem for me..
The box is a PRIMERGY TX200 S5 , 2 socket , 2 x E5520 CPU(s) installed"
and Ruslan and Thomas are currently stumped.
Reported-and-bisected-by: Gabriel C <nix.or.die@gmail.com>
Cc: Ruslan Ruslichenko <rruslich@cisco.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org # for the backport of the original commit
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge fixes from Andrew Morton:
"4 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/slub.c: fix random_seq offset destruction
cpumask: use nr_cpumask_bits for parsing functions
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
kernel/ucount.c: mark user_header with kmemleak_ignore()
Commit 210e7a43fa ("mm: SLUB freelist randomization") broke USB hub
initialisation as described in
https://bugzilla.kernel.org/show_bug.cgi?id=177551.
Bail out early from init_cache_random_seq if s->random_seq is already
initialised. This prevents destroying the previously computed
random_seq offsets later in the function.
If the offsets are destroyed, then shuffle_freelist will truncate
page->freelist to just the first object (orphaning the rest).
Fixes: 210e7a43fa ("mm: SLUB freelist randomization")
Link: http://lkml.kernel.org/r/20170207140707.20824-1-sean@erifax.org
Signed-off-by: Sean Rees <sean@erifax.org>
Reported-by: <userwithuid@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 513e3d2d11 ("cpumask: always use nr_cpu_ids in formatting and
parsing functions") converted both cpumask printing and parsing
functions to use nr_cpu_ids instead of nr_cpumask_bits. While this was
okay for the printing functions as it just picked one of the two output
formats that we were alternating between depending on a kernel config,
doing the same for parsing wasn't okay.
nr_cpumask_bits can be either nr_cpu_ids or NR_CPUS. We can always use
nr_cpu_ids but that is a variable while NR_CPUS is a constant, so it can
be more efficient to use NR_CPUS when we can get away with it.
Converting the printing functions to nr_cpu_ids makes sense because it
affects how the masks get presented to userspace and doesn't break
anything; however, using nr_cpu_ids for parsing functions can
incorrectly leave the higher bits uninitialized while reading in these
masks from userland. As all testing and comparison functions use
nr_cpumask_bits which can be larger than nr_cpu_ids, the parsed cpumasks
can erroneously yield false negative results.
This made the taskstats interface incorrectly return -EINVAL even when
the inputs were correct.
Fix it by restoring the parse functions to use nr_cpumask_bits instead
of nr_cpu_ids.
Link: http://lkml.kernel.org/r/20170206182442.GB31078@htj.duckdns.org
Fixes: 513e3d2d11 ("cpumask: always use nr_cpu_ids in formatting and parsing functions")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Martin Steigerwald <martin.steigerwald@teamix.de>
Debugged-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return
code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY
from ->page_mkwrite is completely unhandled by the mm code and results
in locking and writeably mapping the page which definitely is not what
the caller wanted.
Fix Lustre and block_page_mkwrite_ret() used by other filesystems
(notably GFS2) to return VM_FAULT_NOPAGE instead which results in
bailing out from the fault code, the CPU then retries the access, and we
fault again effectively doing what the handler wanted.
Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The user_header gets caught by kmemleak with the following splat as
missing a free:
unreferenced object 0xffff99667a733d80 (size 96):
comm "swapper/0", pid 1, jiffies 4294892317 (age 62191.468s)
hex dump (first 32 bytes):
a0 b6 92 b4 ff ff ff ff 00 00 00 00 01 00 00 00 ................
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
kmemleak_alloc+0x4a/0xa0
__kmalloc+0x144/0x260
__register_sysctl_table+0x54/0x5e0
register_sysctl+0x1b/0x20
user_namespace_sysctl_init+0x17/0x34
do_one_initcall+0x52/0x1a0
kernel_init_freeable+0x173/0x200
kernel_init+0xe/0x100
ret_from_fork+0x2c/0x40
The BUG_ON()s are intended to crash so no need to clean up after
ourselves on error there. This is also a kernel/ subsys_init() we don't
need a respective exit call here as this is never modular, so just white
list it.
Link: http://lkml.kernel.org/r/20170203211404.31458-1-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When drm_crtc_init_with_planes() was orignally added
(in drm_crtc.c, e13161af80
drm: Add drm_crtc_init_with_planes() (v2)), it only checked for "primary"
being non-null. If that was the case, it modified primary->possible_crtcs.
Then, when support for cursor planes was added
(fc1d3e44ef drm: Allow drivers to register
cursor planes with crtc), the same behaviour was implemented for cursor
planes.
vc4_plane_init() since its inception has passed 0xff as "possible_crtcs"
parameter to drm_universal_plane_init(). With a change in drm_crtc.c
(7abc7d4751 drm: don't override
possible_crtcs for primary/cursor planes) passing 0xff results in primary's
possible_crtcs set to 0xff (cursor was updated manually by vc4_crtc.c).
Consequently, it would be allowed to use the primary plane from CRTC 1 (for
example) on CRTC 0, which would result in the overlay and cursors being
buried.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1485941708-27892-1-git-send-email-andrzej.p@samsung.com
Fixes: 7abc7d4751 ("drm: don't override possible_crtcs for primary/cursor planes")
This patch fixes the case where there is no phydev attached
to a LMAC in DT due to non-existance of a PHY driver or due
to usage of non-stanadard PHY which doesn't support autoneg.
Changes dependeds on firmware to send correct info w.r.t
PHY and autoneg capability.
This patch also covers a case where a 10G/40G interface is used
as a 1G with convertors with Cortina PHY in between.
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYm19aAAoJEFmIoMA60/r8q5AQALuO3zl+fEsUD9k+vf1ernIm
+Bzvzqe7RbmO/1Mke8ccZEJPigOx2Kyv3dcrVxvwVF/mcK7yjPp4NC040f4OBYeu
lkeMC3+3x7k99xNHkszZkYG9wg4xEEqkMrQQcxokuE04FYSCQSyUJnVRtlhC3GWh
I71IH9qHqCMRaIPbnbsOWaHimS2iPBcOIHE0OWlPo0VhUD+hqebQ8tdfTWykFWxU
3YZX0tcqCFF0uZkKZ6zIiC1D2wL3AZ8QDN/FfwyrCRrCwZAJyshBxSk7jIxkvxL/
RkA7b/tbNVug2UGtNJyV7zCc11ApruJ0H9sgHfppzdOo6tr2vov7itaCWFY0AA04
bdEdqvqYnEdQAPXoeIGRbBPovlMjcUXI8qkrNuxZinLdwSya2oB+A+Zn33nkLjnz
buXzbPni3FcriSDQm0l6brI4n0JXopyij6pfQv+Wq6lW/pF4Z54eksxLstZrw29o
tQ+8cMUkmL46q++809c7jM2Mb3ZEXUL0EDbMeN96U4zjIsq/llc//pYsJbeogosa
QSQUhAvKGHprUIhRjizLZ7h1BmYQbQ6oPI2k5wgx6zUNTn0V7MQ+gf2lYC/ogYif
htiKNg9u/nFSqED9JZtUxsyHnlPtRui2iYr/S0JTo8AwLY7vUuXAcMQeQIw0ywW2
QqKJgbZIUJyFKnEax1KS
=uhbh
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- check MSI affinity vs. number of vectors to avoid memory corruption
- drop runtime power management for PCIe hotplug ports for now to avoid
regressing hotplug via sysfs
* tag 'pci-v4.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: pciehp: Add runtime PM support for PCIe hotplug ports"
PCI/MSI: Don't apply affinity if there aren't enough vectors left
dsa_slave_create() can fail, and dsa_user_port_unapply() will properly check
for the network device not being NULL before attempting to destroy it. We were
not setting the slave network device as NULL if dsa_slave_create() failed, so
we would later on be calling dsa_slave_destroy() on a now free'd and
unitialized network device, causing crashes in dsa_slave_destroy().
Fixes: 83c0afaec7 ("net: dsa: Add new binding implementation")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
