-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmHih/MACgkQ+iyteGJfRsqJBQCeN3KG3aVFcHwFM7EgNIRpqQCp
swMAoK0LtVw4gTrQX8YxJ+Ml/ZVz3guA
=NVYY
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- New device support:
- Watchdog Timer driver for RZ/G2L
- Realtek Otto watchdog timer
- Apple SoC watchdog driver
- Fintek F81966
- Remove BCM63XX_WDT after support for this SoC was added to
BCM7038_WDT
- Improvements of the BCM7038_WDT and s3c2410_wdt code
- Several other fixes and improvements
* tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
watchdog: msc313e: Check if the WDT was running at boot
watchdog: Add Apple SoC watchdog driver
dt-bindings: watchdog: Add SM6350 and SM8250 compatible
watchdog: s3c2410: Fix getting the optional clock
watchdog: s3c2410: Use platform_get_irq() to get the interrupt
dt-bindings: watchdog: atmel: Add missing 'interrupts' property
watchdog: mtk_wdt: use platform_get_irq_optional
watchdog: Add Watchdog Timer driver for RZ/G2L
dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L
watchdog: da9063: Add hard dependency on I2C
watchdog: Add Realtek Otto watchdog timer
dt-bindings: watchdog: Realtek Otto WDT binding
watchdog: s3c2410: Add Exynos850 support
watchdog: da9063: use atomic safe i2c transfer in reset handler
watchdog: davinci: Use div64_ul instead of do_div
watchdog: Remove BCM63XX_WDT
MIPS: BCM63XX: Provide platform data to watchdog device
watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt
watchdog: Allow building BCM7038_WDT for BCM63XX
watchdog: bcm7038_wdt: Support platform data configuration
...
Add support for the watchdog timer found in Apple SoCs. This driver is
also required to reboot these machines.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211211123633.4392-2-sven@svenpeter.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add Watchdog Timer driver for RZ/G2L SoC.
WDT IP block supports normal watchdog timer function and reset
request function due to CPU parity error.
This driver currently supports normal watchdog timer function
and later will add support for reset request function due to
CPU parity error.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211130195357.18626-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Realtek MIPS SoCs (platform name Otto) have a watchdog timer with
pretimeout notifitication support. The WDT can (partially) hard reset,
or soft reset the SoC.
This driver implements all features as described in the devicetree
binding, except the phase2 interrupt, and also functions as a restart
handler. The cpu reset mode is considered to be a "warm" restart, since
this mode does not reset all peripherals. Being an embedded system
though, the "cpu" and "software" modes will still cause the bootloader
to run on restart.
It is not known how a forced system reset can be disabled on the
supported platforms. This means that the phase2 interrupt will only fire
at the same time as reset, so implementing phase2 is of little use.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/6d060bccbdcc709cfa79203485db85aad3c3beb5.1637252610.git.sander@svanheule.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Now that we can utilize the BCM7038_WDT driver, remove that one which
was not converted to the watchdog APIs. There are a couple of notable
differences with how the bcm7038_wdt driver proceeds:
- bcm63xx_wdt would register with the ad-hoc BCM63xx hardware timer API,
but this would only be used in order to catch the interrupt *before* a
SoC reset and make the kernel "die"
- bcm6xx_wdt would register a software timer and kick it every second in
order to pet the watchdog, thus offering a two step watchdog process.
This is not something that is brought over to the bcm7038_wdt as it is
deemed unnecessary. If user-space cannot pet the watchdog, but a
kernel timer can, the system is still in a bad shape anyway.
bcm7038_wdt is simpler in its behavior and behaves as a standard
watchdog driver and is not making use of any specific platform APIs,
therefore making it more maintainable and extensible.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112224636.395101-8-f.fainelli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This driver adds initial support for several devices from Siemens. It is
based on a platform driver introduced in an earlier commit.
One of the supported machines does access a GPIO pin to enable the
watchdog. Here we poke GPIO memory because pinctrl does not come up.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211213120502.20661-4-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This driver is named after the ambition to support more SoCs than
the DB8500. Those were never produced, so cut down the scope and
rename the driver accordingly. Since the Kconfig for the watchdog
defaults to y this will still be built by default.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210922230947.1864357-2-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/994d2e374262c3f59f4465c03ef23d3116120778.1621937490.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
It adds a driver for the IP block handling the watchdog timer found for
Mstar MSC313e SoCs and newer.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210611200801.52139-3-romain.perier@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This adds the option to use a hrtimer to generate a watchdog pretimeout
event for hardware watchdogs that do not natively support watchdog
pretimeouts.
With this enabled, all watchdogs will appear to have pretimeout support
in userspace. If no pretimeout value is set, there will be no change in
the watchdog's behavior. If a pretimeout value is set for a specific
watchdog that does not have built-in pretimeout support, a timer will be
started that should fire at the specified time before the watchdog
timeout would occur. When the watchdog is successfully pinged, the timer
will be restarted. If the timer is allowed to fire it will generate a
pretimeout event. However because a software timer is used, it may not
be able to fire in every circumstance.
If the watchdog does support a pretimeout natively, that functionality
will be used instead of the hrtimer.
The general design of this feaure was inspired by the software watchdog,
specifically its own pretimeout implementation. However the software
watchdog and this feature are completely independent. They can be used
together; with or without CONFIG_SOFT_WATCHDOG_PRETIMEOUT enabled.
The main advantage of using the hrtimer pretimeout with a hardware
watchdog, compared to running the software watchdog with a hardware
watchdog, is that if the hardware watchdog driver is unable to ping the
watchdog (e.g. due to a bus or communication error), then the hrtimer
pretimeout would still fire whereas the software watchdog would not.
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1612383090-27110-1-git-send-email-curtis.klein@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add Watchdog support for ROHM BD9576MUF and BD9573MUF PMICs which are
mainly used to power the R-Car series processors. The watchdog is
pinged using a GPIO and enabled using another GPIO. Additionally
watchdog time-out can be configured to HW prior starting the watchdog.
Watchdog timeout can be configured to detect only delayed ping or in
a window mode where also too fast pings are detected.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The tango platform is getting removed, so the driver is no
longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mans Rullgard <mans@mansr.com>
Link: https://lore.kernel.org/r/20210120162745.61268-5-arnd@kernel.org
[groeck: Removed devicetree bindings]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210120162745.61268-4-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120162745.61268-3-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120162745.61268-2-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Commit 625326ea9c ("MIPS: Remove PNX833x alias NXP_STB22x") removed
support for PNX833x, so it's time to remove watchdog driver, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201106130508.103598-1-tsbogend@alpha.franken.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAl+QLMUACgkQ+iyteGJfRsreMACcDuI5w/3sJ5kmjasDm0e7dLte
20gAoL4kLcLAD2v8HiV8RPR+HYyvuic5
=MLjG
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Toshiba Visconti watchdog driver
- it87_wdt: add IT8772 + IT8784
- several fixes and improvements
* tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Add Toshiba Visconti watchdog driver
watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device
watchdog: it87_wdt: add IT8784 ID
watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled
watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3
watchdog: renesas_wdt: support handover from bootloader
watchdog: imx7ulp: Watchdog should continue running for wait/stop mode
watchdog: rti: Simplify with dev_err_probe()
watchdog: davinci: Simplify with dev_err_probe()
watchdog: cadence: Simplify with dev_err_probe()
watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h>
watchdog: Use put_device on error
watchdog: Fix memleak in watchdog_cdev_register
watchdog: imx7ulp: Strictly follow the sequence for wdog operations
watchdog: it87_wdt: add IT8772 ID
watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed
drivers: watchdog: rdc321x_wdt: Fix race condition bugs
Add support for the watchdog of the sl28cpld board management
controller. This is part of a multi-function device driver.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds a watchdog driver that can be used on ARM systems
with the appropriate watchdog implemented in Secure Monitor firmware.
The driver communicates with firmware via a Secure Monitor Call.
This may be useful for platforms using TrustZone that want
the Secure Monitor firmware to have the final control over the watchdog.
This is implemented on mt8173 chromebook devices oak, elm and hana in
arm trusted firmware file plat/mediatek/mt8173/drivers/wdt/wdt.c.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: Xingyu Chen<xingyu.chen@amlogic.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200505131242.v6.2.Ia92bb4d4ce84bcefeba1d00aaa1c1e919b6164ef@changeid
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Texas Instruments K3 SoCs contain an RTI (Real Time Interrupt) module
which can be used as a watchdog. This IP provides a support for
windowed watchdog mode, in which the watchdog must be petted within
a certain time window. If it is petted either too soon, or too late,
a watchdog error will be triggered.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200312095808.19907-4-t-kristo@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The i.MX7ULP Watchdog Timer (WDOG) module is an independent timer
that is available for system use.
It provides a safety feature to ensure that software is executing
as planned and that the CPU is not stuck in an infinite loop or
executing unintended code. If the WDOG module is not serviced
(refreshed) within a certain period, it resets the MCU.
Add driver support for i.MX7ULP watchdog.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1566999303-18795-2-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The ARM w90x900 platform is getting removed, so this driver is obsolete
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190809202749.742267-7-arnd@arndb.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The platform is getting removed, so there are no remaining
users of this driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190809202749.742267-5-arnd@arndb.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
inside, the system controller is in charge of controlling power,
clock and watchdog etc..
This patch adds i.MX system controller watchdog driver support,
watchdog operation needs to be done in secure EL3 mode via
ARM-Trusted-Firmware, using SMC call, CPU will trap into
ARM-Trusted-Firmware and then it will request system controller
to do watchdog operation via IPC.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Initial support for watchdog block included in ROHM BD70528
power management IC.
Configurations for low power states are still to be checked.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Introduce watchdog driver for a various range of Mellanox Ethernet and
Infiniband switch systems.
Watchdog driver for Mellanox watchdog devices, implemented in
programmable logic device.
Main and auxiliary watchdog devices can exist on the same system.
There are several actions that can be defined in the watchdog:
system reset, start fans on full speed and increase a counter.
The last 2 actions are performed without a system reset.
Actions without reset are provided for auxiliary watchdog devices,
which is optional.
Access to HW registers is performed through generic
regmap interface.
There are 2 types of HW watchdog implementations.
Type 1: actual HW timeout can be defined as power of 2 msec.
e.g. timeout 20 sec will be rounded up to 32768 msec.;
maximum timeout period is 32 sec (32768 msec.);
get time-left isn't supported
Type 2: actual HW timeout is defined in sec. and it's the same as
user-defined timeout;
maximum timeout is 255 sec;
get time-left is supported;
Watchdog driver is probed from the common mlx_platform driver.
Signed-off-by: Michael Shych <michaelsh@mellanox.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The STPMIC1 PMIC embeds a watchdog which is disabled by default. As soon
as the watchdog is started, it must be refreshed periodically otherwise
the PMIC goes off.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Some TQ-Systems ComExpress modules have an IO controller with a
watchdog timer.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The PM816 module is a versatile PMIC with many diverse functions
integrated, including, a watchdog.
This watchdog is subcomponent of the PON (Power On) peripheral,
in the same way as pwrkey/resin buttons.
It works with two timers (2-stages), the first one generates an
IRQ to the main SoC (APQ8016/MSM8916), the second one performs
the reset.
This driver expects the following device hierarchy:
[pm8916]->[pm8916-pon]->[pm8916-wdt]
It uses the pm8916 regmap to access PM8916 registers.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This adds support for the CPU watchdog found on Marvell Armada 37xx
SoCs.
There are 4 counters which can be set as CPU watchdog counters.
This driver uses the second counter (ID 1, counting from 0) as watchdog
counter, and first counter (ID 0) to implement pinging on the second
counter without the need to disable it.
Since counters IDs 2 and 3 are enabled already before even U-Boot
starts, this driver does not use them at all, for example by adding a
device tree property for counter selection.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add a driver for the MEN 16z069 Watchdog and Reset Controller IP-Core.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Michael Moese <mmoese@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The blackfin architecture is getting removed, so this driver has
become obsolete.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Nuvoton NPCM750 has a watchdog implemented as a single register
inside the timer peripheral.
This driver exposes that watchdog as a standard watchdog device with
coarse timeout intervals, limited by the combination of prescaler and
counter that is provided by the hardware. The calculation is taken from
the Nuvoton vendor tree.
The watchdog is left running if a bootloader had it going. The rate is
the one specified in the device tree, or the default value (obtained
from the datasheet).
There is a pre-timeout IRQ that is wired up. This timeout always occurs
1024 clocks before the timeout.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAlp4I7MACgkQ+iyteGJfRsp34QCgi3O78Sajso9iJNMj5KJsQTEt
VOsAn1ioW2jO9CmZQoj4IlVStlKU0NCN
=jeHv
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-4.16-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- new watchdog device drivers for Realtek RTD1295 and Spreadtrum SC9860
platform
- add support for the following devices: jz4780 SoC, AST25xx series SoC
and r8a77970 SoC
- convert to watchdog framework: i6300esb_wdt, xen_wdt and sp5100_tco
- several fixes for watchdog core
- remove at32ap700x and obsolete documentation
- gpio: Convert to use GPIO descriptors
- rename gemini into FTWDT010 as this IP block is generc from Faraday
Technology
- various clean-ups and small bugfixes
- add Guenter Roeck as co-maintainer
- change maintainers e-mail address
* tag 'linux-watchdog-4.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits)
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt
documentation: watchdog: remove documentation for ixp2000
documentation: watchdog: remove documentation of at32ap700x_wdt
watchdog: remove at32ap700x_wdt
watchdog: sp5100_tco: Add support for recent FCH versions
watchdog: sp5100-tco: Abort if watchdog is disabled by hardware
watchdog: sp5100_tco: Use bit operations
watchdog: sp5100_tco: Convert to use watchdog subsystem
watchdog: sp5100_tco: Clean up function and variable names
watchdog: sp5100_tco: Use dev_ print functions where possible
watchdog: sp5100_tco: Match PCI device early
watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
watchdog: sp5100_tco: Use standard error codes
watchdog: sp5100_tco: Use request_muxed_region where possible
watchdog: sp5100_tco: Fix watchdog disable bit
watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG}
watchdog: core: make sure the watchdog_worker is not deferred
watchdog: mt7621: switch to using managed devm_watchdog_register_device()
watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate
watchdog: imx2_wdt: restore previous timeout after suspend+resume
...
This patch adds the watchdog driver for Spreadtrum SC9860 platform.
Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This renames all the driver files and symbols for the Gemini
watchdog to FTWDT010 as it has been revealed that this IP block
is a generic watchdog timer from Faraday Technology used in
several SoC designs.
Select this driver by default for the Gemini, it is a sensible
driver to always have enabled.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Add a watchdog driver for the Realtek RTD1295 SoC.
Based on QNAP's arch/arm/mach-rtk119x/driver/rtk_watchdog.c code and
mach-rtk119x/driver/dc2vo/fpga/include/iso_reg.h register defines.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
