Previously the xattr code would send in a fake value, containing a tree
root, to the function that installed name+value pairs. Instead, we pass
the real value to ocfs2_xa_set_inline_value(), and it notices that the
value cannot fit. Thus, it installs a tree root.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We create two new functions on ocfs2_xa_loc, ocfs2_xa_prepare_entry()
and ocfs2_xa_store_inline_value().
ocfs2_xa_prepare_entry() makes sure that the xl_entry field of
ocfs2_xa_loc is ready to receive an xattr. The entry will point to an
appropriately sized name+value region in storage. If an existing entry
can be reused, it will be. If no entry already exists, it will be
allocated. If there isn't space to allocate it, -ENOSPC will be
returned.
ocfs2_xa_store_inline_value() stores the data that goes into the 'value'
part of the name+value pair. For values that don't fit directly, this
stores the value tree root.
A number of operations are added to ocfs2_xa_loc_operations to support
these functions. This reflects the disparate behaviors of xattr blocks
and buckets.
With these functions, the overlapping ocfs2_xattr_set_entry_local() and
ocfs2_xattr_set_entry_normal() can be replaced with a single call
scheme.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
An ocfs2 xattr entry stores the text name and value as a pair in the
storage area. Obviously names and values can be variable-sized. If a
value is too large for the entry storage, a tree root is stored instead.
The name+value pair is also padded.
Because of this, there are a million places in the code that do:
if (needs_external_tree(value_size)
namevalue_size = pad(name_size) + tree_root_size;
else
namevalue_size = pad(name_size) + pad(value_size);
Let's create some convenience functions to make the code more readable.
There are three forms. The first takes the raw sizes. The second takes
an ocfs2_xattr_info structure. The third takes an existing
ocfs2_xattr_entry.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Rather than calculating strlen all over the place, let's store the
name length directly on ocfs2_xattr_info.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
struct ocfs2_xattr_info is a useful structure describing an xattr
you'd like to set. Let's put prefixes on the member fields so it's
easier to read and use.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Add ocfs2_xa_remove_entry(), which will remove an xattr entry from its
storage via the ocfs2_xa_loc descriptor.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The ocfs2 extended attribute (xattr) code is very flexible. It can
store xattrs in the inode itself, in an external block, or in a tree of
data structures. This allows the number of xattrs to be bounded by the
filesystem size.
However, the code that manages each possible storage location is
different. Maintaining the ocfs2 xattr code requires changing each hunk
separately.
This patch is the start of a series introducing the ocfs2_xa_loc
structure. This structure wraps the on-disk details of an xattr
entry. The goal is that the generic xattr routines can use
ocfs2_xa_loc without knowing the underlying storage location.
This first pass merely implements the basic structure, initializing it,
and wiping the name+value pair of the entry.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Add current->comm to the standard mlog() output to help with debugging.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
When ocfs2 has to do CoW for refcounted extents, we disable direct I/O
and go through the buffered I/O path. This makes the combined check
easier to read.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch add extent block (metadata) stealing mechanism for
extent allocation. This mechanism is same as the inode stealing.
if no room in slot specific extent_alloc, we will try to
allocate extent block from the next slot.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/cluster: Make o2net connect messages KERN_NOTICE
ocfs2/dlm: Fix printing of lockname
ocfs2: Fix contiguousness check in ocfs2_try_to_merge_extent_map()
ocfs2/dlm: Remove BUG_ON in dlm recovery when freeing locks of a dead node
ocfs2: Plugs race between the dc thread and an unlock ast message
ocfs2: Remove overzealous BUG_ON during blocked lock processing
ocfs2: Do not downconvert if the lock level is already compatible
ocfs2: Prevent a livelock in dlmglue
ocfs2: Fix setting of OCFS2_LOCK_BLOCKED during bast
ocfs2: Use compat_ptr in reflink_arguments.
ocfs2/dlm: Handle EAGAIN for compatibility - v2
ocfs2: Add parenthesis to wrap the check for O_DIRECT.
ocfs2: Only bug out when page size is larger than cluster size.
ocfs2: Fix memory overflow in cow_by_page.
ocfs2/dlm: Print more messages during lock migration
ocfs2/dlm: Ignore LVBs of locks in the Blocked list
ocfs2/trivial: Remove trailing whitespaces
ocfs2: fix a misleading variable name
ocfs2: Sync max_inline_data_with_xattr from tools.
ocfs2: Fix refcnt leak on ocfs2_fast_follow_link() error path
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] Fix ondemand to not request targets outside policy limits
[CPUFREQ] Fix use after free of struct powernow_k8_data
[CPUFREQ] fix default value for ondemand governor
Connect and disconnect messages are more than informational as they are required
during root cause analysis for failures. This patch changes them from KERN_INFO
to KERN_NOTICE.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Faseh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The debug call printing the name of the lock resource was chopping
off the last character. This patch fixes the problem.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'v4l_for_linus' of git://linuxtv.org/fixes:
V4L/DVB: dvb-core: fix initialization of feeds list in demux filter
V4L/DVB: dvb_demux: Don't use vmalloc at dvb_dmx_swfilter_packet
V4L/DVB: Fix the risk of an oops at dvb_dmx_release
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Remove superfluous setup_frame_reg call
sh: Don't continue unwinding across interrupts
sh: Setup frame pointer in handle_exception path
sh: Correct the offset of the return address in ret_from_exception
usb: r8a66597-hcd: Fix up spinlock recursion in root hub polling.
usb: r8a66597-hcd: Flush the D-cache for the pipe-in transfer buffers.
A DVB demultiplexer device can be used to set up either a PES filter or
a section filter. In the former case, the ts field of the feed union of
struct dmxdev_filter is used, in the latter case the sec field of the
same union is used.
The ts field is a struct list_head, and is currently initialized in the
open() method of the demux device. When for a given demuxer a section
filter is set up, the sec field is played with, thus if a PES filter
needs to be set up after that the ts field will be corrupted, causing a
kernel oops.
This fix moves the list head initialization to
dvb_dmxdev_pes_filter_set(), so that the ts field is properly
initialized every time a PES filter is set up.
Signed-off-by: Francesco Lavra <francescolavra@interfree.it>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Walls <awalls@radix.net>
Tested-by: hermann pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As dvb_dmx_swfilter_packet() is protected by a spinlock, it shouldn't sleep.
However, vmalloc() may call sleep. So, move the initialization of
dvb_demux::cnt_storage field to a better place.
Reviewed-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
dvb_dmx_init tries to allocate virtual memory for 2 pointers: filter and feed.
If the second vmalloc fails, filter is freed, but the pointer keeps pointing
to the old place. Later, when dvb_dmx_release() is called, it will try to
free an already freed memory, causing an OOPS.
Reviewed-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We found that on write-trough kernel is necessary to do that invalidation.
One WB is possible to use invalidation too.
Signed-off-by: Michal Simek <monstr@monstr.eu>
The code to track the CPPR values added by commit
49bd364713 ("powerpc/pseries: Track previous
CPPR values to correctly EOI interrupts") broke kexec on pseries because
the kexec code in xics.c calls xics_set_cpu_priority() before the IPI has
been EOI'ed. This wasn't a problem previously but it now triggers a BUG_ON
in xics_set_cpu_priority() because os_cppr->index isn't 0.
Fix this problem by setting the index on the CPPR stack to 0 before calling
xics_set_cpu_priority() in xics_teardown_cpu().
Also make it clear that we only want to set the priority when there's just
one CPPR value in the stack, and enforce it by updating the value of
os_cppr->stack[0] rather than os_cppr->stack[os_cppr->index].
While we're at it change the BUG_ON to a WARN_ON.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
There's no need to setup the frame pointer again in
call_handle_tlbmiss. The frame pointer will already have been setup in
handle_interrupt.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Unfortunately, due to poor DWARF info in current toolchains, unwinding
through interrutps cannot be done reliably. The problem is that the
DWARF info for function epilogues is wrong.
Take this standard epilogue sequence,
80003cc4: e3 6f mov r14,r15
80003cc6: 26 4f lds.l @r15+,pr
80003cc8: f6 6e mov.l @r15+,r14
<---- interrupt here
80003cca: f6 6b mov.l @r15+,r11
80003ccc: f6 6a mov.l @r15+,r10
80003cce: f6 69 mov.l @r15+,r9
80003cd0: 0b 00 rts
If we take an interrupt at the highlighted point, the DWARF info will
bogusly claim that the return address can be found at some offset from
the frame pointer, even though the frame pointer was just restored. The
worst part is if the unwinder finds a text address at the bogus stack
address - unwinding will continue, for a bit, until it finally comes
across an unexpected address on the stack and blows up.
The only solution is to stop unwinding once we've calculated the
function that was executing when the interrupt occurred. This PC can be
easily calculated from pt_regs->pc.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
In order to allow the DWARF unwinder to unwind through exceptions we
need to setup the frame pointer register (r14).
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The address that ret_from_exception and ret_from_irq will return to is
found in the stack slot for SPC, not PR. This error was causing the
DWARF unwinder to pick up the wrong return address on the stack and then
unwind using the unwind tables for the wrong function.
While I'm here I might as well add CFI annotations for the other
registers since they could be useful when unwinding.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
Take ima_file_free() to proper place.
ima: rename PATH_CHECK to FILE_CHECK
ima: rename ima_path_check to ima_file_check
ima: initialize ima before inodes can be allocated
fix ima breakage
Take ima_path_check() in nfsd past dentry_open() in nfsd_open()
freeze_bdev: don't deactivate successfully frozen MS_RDONLY sb
befs: fix leak
This reverts commit 7036251180 ("tty: fix race in tty_fasync") and
commit b04da8bfdf ("fnctl: f_modown should call write_lock_irqsave/
restore") that tried to fix up some of the fallout but was incomplete.
It turns out that we really cannot hold 'tty->ctrl_lock' over calling
__f_setown, because not only did that cause problems with interrupt
disables (which the second commit fixed), it also causes a potential
ABBA deadlock due to lock ordering.
Thanks to Tetsuo Handa for following up on the issue, and running
lockdep to show the problem. It goes roughly like this:
- f_getown gets filp->f_owner.lock for reading without interrupts
disabled, so an interrupt that happens while that lock is held can
cause a lockdep chain from f_owner.lock -> sighand->siglock.
- at the same time, the tty->ctrl_lock -> f_owner.lock chain that
commit 7036251180 introduced, together with the pre-existing
sighand->siglock -> tty->ctrl_lock chain means that we have a lock
dependency the other way too.
So instead of extending tty->ctrl_lock over the whole __f_setown() call,
we now just take a reference to the 'pid' structure while holding the
lock, and then release it after having done the __f_setown. That still
guarantees that 'struct pid' won't go away from under us, which is all
we really ever needed.
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Américo Wang <xiyou.wangcong@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the movement of the ima hooks functions were renamed from *path* to
*file* since they always deal with struct file. This patch renames some of
the ima internal flags to make them consistent with the rest of the code.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ima_path_check actually deals with files! call it ima_file_check instead.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ima wants to create an inode information struct (iint) when inodes are
allocated. This means that at least the part of ima which does this
allocation (the allocation is filled with information later) should
before any inodes are created. To accomplish this we split the ima
initialization routine placing the kmem cache allocator inside a
security_initcall() function. Since this makes use of radix trees we also
need to make sure that is initialized before security_initcall().
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The "Untangling ima mess, part 2 with counters" patch messed
up the counters. Based on conversations with Al Viro, this patch
streamlines ima_path_check() by removing the counter maintaince.
The counters are now updated independently, from measuring the file,
in __dentry_open() and alloc_file() by calling ima_counts_get().
ima_path_check() is called from nfsd and do_filp_open().
It also did not measure all files that should have been measured.
Reason: ima_path_check() got bogus value passed as mask.
[AV: mea culpa]
[AV: add missing nfsd bits]
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Thanks Thomas and Christoph for testing and review.
I removed 'smp_wmb()' before up_write from the previous patch,
since up_write() should have necessary ordering constraints.
(I.e. the change of s_frozen is visible to others after up_write)
I'm quite sure the change is harmless but if you are uncomfortable
with Tested-by/Reviewed-by on the modified patch, please remove them.
If MS_RDONLY, freeze_bdev should just up_write(s_umount) instead of
deactivate_locked_super().
Also, keep sb->s_frozen consistent so that remount can check the frozen state.
Otherwise a crash reported here can happen:
http://lkml.org/lkml/2010/1/16/37http://lkml.org/lkml/2010/1/28/53
This patch should be applied for 2.6.32 stable series, too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Thomas Backlund <tmb@mandriva.org>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
drm/i915: Fix leak of relocs along do_execbuffer error path
drm/i915: slow acpi_lid_open() causes flickering - V2
drm/i915: Disable SR when more than one pipe is enabled
drm/i915: page flip support for Ironlake
drm/i915: Fix the incorrect DMI string for Samsung SX20S laptop
drm/i915: Add support for SDVO composite TV
drm/i915: don't trigger ironlake vblank interrupt at irq install
drm/i915: handle non-flip pending case when unpinning the scanout buffer
drm/i915: Fix the device info of Pineview
drm/i915: enable vblank interrupt on ironlake
drm/i915: Prevent use of uninitialized pointers along error path.
drm/i915: disable hotplug detect before Ironlake CRT detect
We incorrectly depended on the 'node_state/node_isset()' functions
testing the node range, rather than checking it explicitly. That's not
reliable, even if it might often happen to work. So do the proper
explicit test.
Reported-by: Marcus Meissner <meissner@suse.de>
Acked-and-tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The wrong member was compared in the continguousness check.
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Different motherboards have different PNP declarations for
W83781D/W83782D chips. Some declare the whole range of I/O ports (8
ports), some declare only the useful ports (2 ports at offset 5) and
some declare fancy ranges, for example 4 ports at offset 4. To
properly handle all cases, request all ports individually for probing.
After we have determined that we really have a W83781D or W83782D
chip, the useful port range will be requested again, as a single
block.
I did not see a board which needs this yet, but I know of one for lm78
driver and I'd like to keep the logic of these two drivers in sync.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Different motherboards have different PNP declarations for LM78/LM79
chips. Some declare the whole range of I/O ports (8 ports), some
declare only the useful ports (2 ports at offset 5) and some declare
fancy ranges, for example 4 ports at offset 4. To properly handle all
cases, request all ports individually for probing. After we have
determined that we really have an LM78 or LM79 chip, the useful port
range will be requested again, as a single block.
This fixes the driver on the Olivetti M3000 DT 540, at least.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the
for loops that use this as a limit count are of the typical form, "for
(n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages
w/o missing the last one it is necessary for the count to be one greater
than it is. (Specifically, you will miss the +1.5V 3GPIO input with count
= 12 vs. 13.)
Signed-off-by: Ray Copeland <ray.copeland@aprius.com>
Acked-by: "Darrick J. Wong" <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
[libata] Call flush_dcache_page after PIO data transfers in libata-sff.c
ahci: add Acer G725 to broken suspend list
libata: fix ata_id_logical_per_physical_sectors
libata-scsi passthru: fix bug which truncated LBA48 return values
