In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are
used as expected to iterate over the list of local addresses, but
list_for_each_entry() was used instead of list_for_each_entry_rcu() in
__lookup_addr(). It is important to use this variant which adds the
required READ_ONCE() (and diagnostic checks if enabled).
Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it
is called under the pernet->lock and not rcu_read_lock(), an extra
condition is then passed to help the diagnostic checks making sure
either the associated spin lock or the RCU lock is held.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-3-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When traversing userspace_pm_local_addr_list and deleting an entry from
it in mptcp_pm_nl_remove_doit(), msk->pm.lock should be held.
This patch holds this lock before mptcp_userspace_pm_lookup_addr_by_id()
and releases it after list_move() in mptcp_pm_nl_remove_doit().
Fixes: d9a4594eda ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-2-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just like in-kernel pm, when userspace pm does set_flags, it needs to send
out MP_PRIO signal, and also modify the flags of the corresponding address
entry in the local address list. This patch implements the missing logic.
Traverse all address entries on userspace_pm_local_addr_list to find the
local address entry, if bkup is true, set the flags of this entry with
FLAG_BACKUP, otherwise, clear FLAG_BACKUP.
Fixes: 892f396c8e ("mptcp: netlink: issue MP_PRIO signals from userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-1-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
eb284f4b37 drm/nouveau/dp: Honor GSP link training retry timeouts
tried to fix a problem with panel retires, however it appears
the auxch also needs the same treatment, so add the same retry
wrapper around it.
This fixes some eDP panels after a suspend/resume cycle.
Fixes: eb284f4b37 ("drm/nouveau/dp: Honor GSP link training retry timeouts")
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111034126.2028401-2-airlied@gmail.com
When this code moved to non-coherent allocator the sync was put too
early for some firmwares which called the setup function, move the
sync down after the setup function.
Reported-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Fixes: 9b340aeb26 ("nouveau/firmware: use dma non-coherent allocator")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114004603.3095485-1-airlied@gmail.com
Fix a locking issue in the asymmetric CPU capacity setup code in the
intel_pstate driver that may lead to a deadlock if CPU online/offline
runs in parallel with the code in question, which is unlikely but not
impossible (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=AIPF
-----END PGP SIGNATURE-----
Merge tag 'pm-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a locking issue in the asymmetric CPU capacity setup code in the
intel_pstate driver that may lead to a deadlock if CPU online/offline
runs in parallel with the code in question, which is unlikely but not
impossible (Rafael Wysocki)"
* tag 'pm-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Rearrange locking in hybrid_init_cpu_capacity_scaling()
Two bug fixes for TPM bus encryption (the remaining reported issues in
the feature).
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZzT7PQAKCRAaerohdGur
0ny/AP9e6gN+H3lIVQNdbeSKhtBJyWalxOnvAQ4ymjTCyyyqXAD/Ua36HA7FRYxI
Ltp2swtz3WcsGgqtRpU+cmcb1Y21DAg=
=5kvC
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two bug fixes for TPM bus encryption (the remaining reported issues in
the feature)"
* tag 'tpmdd-next-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Disable TPM on tpm2_create_primary() failure
tpm: Opt-in in disable PCR integrity protection
seq_printf is costly. For each block device, 19 decimal values are
yielded in /proc/diskstats via seq_printf. On a system with 16 logical
block devices, profiling for open/read/close sequences shows seq_printf
took ~75% samples of diskstats_show:
diskstats_show(92.626% 2269372/2450040)
seq_printf(76.026% 1725313/2269372)
vsnprintf(99.163% 1710866/1725313)
format_decode(26.597% 455040/1710866)
number(19.554% 334542/1710866)
memcpy_orig(4.183% 71570/1710866)
...
srso_return_thunk(0.009% 148/1725313)
part_stat_read_all(8.030% 182236/2269372)
One million rounds of open/read/close /proc/diskstats takes:
real 0m37.687s
user 0m0.264s
sys 0m32.911s
On average, each sequence tooks ~0.032ms
With this patch, most decimal values are yield via seq_put_decimal_ull,
performance is significantly improved:
real 0m20.792s
user 0m0.316s
sys 0m20.463s
On average, each sequence tooks ~0.020ms, a ~37.5% improvement.
Signed-off-by: David Wang <00107082@163.com>
Link: https://lore.kernel.org/r/20241108054500.4251-1-00107082@163.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some applications require Vout to be higher than the detectable voltage
range of the Vsense pin for a given rail. In such applications, a voltage
divider may be placed between Vout and the Vsense pin, but this results
in erroneous telemetry being read back from the part. This change adds
support for a voltage divider to be defined in the devicetree for a (or
multiple) specific rail(s) for a supported digital multiphase device and
for the applicable Vout telemetry to be scaled based on the voltage
divider configuration.
This change copies the implementation of the vout-voltage-divider
devicetree property defined in the maxim,max20730 bindings schema since
it is the best fit for the use case of scaling hwmon PMBus telemetry. The
generic voltage-divider property used by many iio drivers was determined
to be a poor fit because that schema is tied directly to iio and the
isl68137 driver is not an iio driver.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Message-ID: <8c2d048f87282bcf66313afbf5e923d8fc17b4d7.1731439797.git.grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add devicetree bindings to support declaring optional voltage dividers to
the rail outputs of supported digital multiphase regulators. Some
applications require Vout to exceed the voltage range that the Vsense pin
can detect. This binding definition allows users to define the
characteristics of a voltage divider placed between Vout and the Vsense
pin for any rail powered by the device.
These bindings copy the vout-voltage-divider property defined in the
maxim,max20730 bindings schema since it is the best fit for the use case
of scaling hwmon PMBus telemetry. The generic voltage-divider property
used by many iio drivers was determined to be a poor fit because that
schema is tied directly to iio for the purpose of scaling io-channel
voltages and the isl68137 driver is not an iio driver.
New schema file named isil,isl68137.yaml to align with the corresponding
driver name and pre-existing bindings ported from trivial bindings.
However, all new device bindings use renesas as the vendor prefix
since Renesas acquired Intersil and now maintains all documentation
for the devices.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <f7ac200e982961ff733de27a5c4505c04d68b6f3.1731439797.git.grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
It's possible to build a kernel with tmp108 built-in but i3c support
in a loadable module, but that results in a link failure:
x86_64-linux-ld: drivers/hwmon/tmp108.o: in function `p3t1085_i3c_probe':
tmp108.c:(.text+0x5f9): undefined reference to `i3cdev_to_dev'
Add a Kconfig dependency to ensure only the working configurations
are allowed.
Fixes: c40655e331 ("hwmon: (tmp108) Add support for I3C device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-ID: <20241113175615.2442851-1-arnd@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch fixes an issue in the function xenbus_dev_probe(). In the
xenbus_dev_probe() function, within the if (err) branch at line 313, the
program incorrectly returns err directly without releasing the resources
allocated by err = drv->probe(dev, id). As the return value is non-zero,
the upper layers assume the processing logic has failed. However, the probe
operation was performed earlier without a corresponding remove operation.
Since the probe actually allocates resources, failing to perform the remove
operation could lead to problems.
To fix this issue, we followed the resource release logic of the
xenbus_dev_remove() function by adding a new block fail_remove before the
fail_put block. After entering the branch if (err) at line 313, the
function will use a goto statement to jump to the fail_remove block,
ensuring that the previously acquired resources are correctly released,
thus preventing the reference count leak.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and detecting potential issues where resources are not properly managed.
In this case, the tool flagged the missing release operation as a
potential problem, which led to the development of this patch.
Fixes: 4bac07c993 ("xen: add the Xenbus sysfs and virtual device hotplug driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241105130919.4621-1-chenqiuji666@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The earlier bug fix misplaced the error-label when dealing with the
tpm2_create_primary() return value, which the original completely ignored.
Cc: stable@vger.kernel.org
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1087331
Fixes: cc7d859434 ("tpm: Rollback tpm2_load_null()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The initial HMAC session feature added TPM bus encryption and/or integrity
protection to various in-kernel TPM operations. This can cause performance
bottlenecks with IMA, as it heavily utilizes PCR extend operations.
In order to mitigate this performance issue, introduce a kernel
command-line parameter to the TPM driver for disabling the integrity
protection for PCR extend operations (i.e. TPM2_PCR_Extend).
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/linux-integrity/20241015193916.59964-1-zohar@linux.ibm.com/
Fixes: 6519fea6fd ("tpm: add hmac checks to tpm2_pcr_extend()")
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
LIFO ordering for batched completions is a bit unexpected and also
defeats some merging optimizations in e.g. the XFS buffered write
code. Now that we can easily add the request to the tail of the list
do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add requests to the tail of the list instead of the front so that they
are queued up in submission order.
Remove the re-reordering in blk_mq_dispatch_plug_list, virtio_queue_rqs
and nvme_queue_rqs now that the list is ordered as expected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the semi-open coded request list helpers with a proper rq_list
type that mirrors the bio_list and has head and tail pointers. Besides
better type safety this actually allows to insert at the tail of the
list, which will be useful soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_flush_plug_list submits requests in the reverse order that they
were submitted, which leads to a rather suboptimal I/O pattern
especially in rotational devices. Fix this by rewriting virtio_queue_rqs
so that it always pops the requests from the passed in request list, and
then adds them to the head of a local submit list. This actually
simplifies the code a bit as it removes the complicated list splicing,
at the cost of extra updates of the rq_next pointer. As that should be
cache hot anyway it should be an easy price to pay.
Fixes: 0e9911fa76 ("virtio-blk: support mq_ops->queue_rqs()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_flush_plug_list submits requests in the reverse order that they
were submitted, which leads to a rather suboptimal I/O pattern especially
in rotational devices. Fix this by rewriting nvme_queue_rqs so that it
always pops the requests from the passed in request list, and then adds
them to the head of a local submit list. This actually simplifies the
code a bit as it removes the complicated list splicing, at the cost of
extra updates of the rq_next pointer. As that should be cache hot
anyway it should be an easy price to pay.
Fixes: d62cbcf62f ("nvme: add support for mq_ops->queue_rqs()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call blk_validate_limits on the queue limits used for zone append
splitting so that calculated values get filled in and any stacking
conflicts get cought.
Without this there isn't a max_zone_append_sectors limits as of commit
559218d43e ("block: pre-calculate max_zone_append_sectors").
Fixes: 559218d43e ("block: pre-calculate max_zone_append_sectors")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241113084541.34315-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While block drivers do the validation as part of committing them to the
queue, users that use the limit outside of a block device context have
to validate the limits and fill in the calculated values as well.
So far btrfs is the only user of queue limits without a block device,
and it has gotten away with that more or less by accident. But with
commit 559218d43e ("block: pre-calculate max_zone_append_sectors")
this became fatal for setups that have small max zone append size,
as it won't be limited now.
Export blk_validate_limits so that it can be called directly from btrfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241113084541.34315-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code indicates that journal_init_common() fills the journal_t object
it returns while the comment incorrectly states that only a few fields are
initialised. Also, the comment claims that journal structures could be
created from scratch which isn't possible as journal_init_common() calls
journal_load_superblock() which loads and checks journal superblock from
disk.
Signed-off-by: Daniel Martín Gómez <dalme@riseup.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20241107144538.3544-1-dalme@riseup.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use ktime_get_ns instead of ktime_get_real_ns when computing the lr_timeout
not to be affected by system time jumps.
Use a boolean instead of the MAX_JIFFY_OFFSET value to determine whether
the next_wakeup value has been set. Comparing elr->lr_next_sched to
MAX_JIFFY_OFFSET can cause the lazyinit thread to loop indefinitely.
Co-developed-by: Lukas Skupinski <lukas.skupinski@landisgyr.com>
Signed-off-by: Lukas Skupinski <lukas.skupinski@landisgyr.com>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241106134741.26948-2-othacehe@gnu.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Inline and use struct_size() to calculate the number of bytes to
allocate for new_fn and remove the local variable len.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20241105103353.11590-2-thorsten.blum@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add the __counted_by compiler attribute to the flexible array member
name to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20241105101813.10864-2-thorsten.blum@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we
are getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure (`struct shash_desc`) where the size of the
flexible-array member (`__ctx`) is known at compile-time, and
refactor the rest of the code, accordingly.
So, with this, fix 77 of the following warnings:
include/linux/jbd2.h:1800:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/ZyU94w0IALVhc9Jy@kspp
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6
(Jiawei Ye)
- Fix BPF sockmap with kTLS to reject vsock and unix sockets
upon kTLS context retrieval (Zijian Zhang)
- Fix BPF bits iterator selftest for s390x (Hou Tao)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZzQV0BUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPFywD9Fx9Qc7LdWGmRAmWTqGKSOVPTBC1L
eC/uXop6sLqapP0A/1KsLQmntvXhp+gmxzPEBdwAwb7/DvyPCQV19FZ/sIkA
=lDzI
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye)
- Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS
context retrieval (Zijian Zhang)
- Fix BPF bits iterator selftest for s390x (Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx
selftests/bpf: Use -4095 as the bad address for bits iterator
-----BEGIN PGP SIGNATURE-----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=kp9x
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- fix possible CPUs setup logical-physical CPU mapping, in order to
avoid CPU hotplug issue
- fix some KASAN bugs
- fix AP booting issue in VM mode
- some trivial cleanups
* tag 'loongarch-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix AP booting issue in VM mode
LoongArch: Add WriteCombine shadow mapping in KASAN
LoongArch: Disable KASAN if PGDIR_SIZE is too large for cpu_vabits
LoongArch: Make KASAN work with 5-level page-tables
LoongArch: Define a default value for VM_DATA_DEFAULT_FLAGS
LoongArch: Fix early_numa_add_cpu() usage for FDT systems
LoongArch: For all possible CPUs setup logical-physical CPU mapping
singletons.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzP1ZAAKCRDdBJ7gKXxA
jmBUAP9n2zTKoNeF/WpS0aSg+SpG78mtyMIwSUW2PPfGObYTBwD/bncG9U3fnno1
v6Sey0OjAKwGdV+gTd+5ymWJKPSQbgA=
=HxTA
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. 7 are MM, 3 are not. All
singletons"
* tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: swapfile: fix cluster reclaim work crash on rotational devices
selftests: hugetlb_dio: fixup check for initial conditions to skip in the start
mm/thp: fix deferred split queue not partially_mapped: fix
mm/gup: avoid an unnecessary allocation call for FOLL_LONGTERM cases
nommu: pass NULL argument to vma_iter_prealloc()
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
mm: page_alloc: move mlocked flag clearance into free_pages_prepare()
mm: count zeromap read and set for swapout and swapin
Add tracing of reservation commands, including register, acquire,
release and report, and also parse the action and rtype to string
to make the trace log more human-readable.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Parse reservation commands's action(including rrega, racqa and rrela)
and rtype to string to make the trace log more human-readable.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, we report that controller has vwc even though the ns may
not have vwc. Report ns's vwc not present when not buffered_io or
backdev doesn't have vwc.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
It's used only to initialize ->getattr in one inode_operations instance
(empty_dir_inode_operations) and its behaviour had always been equivalent
to what we get with NULL ->getattr.
Just remove that initializer, along with empty_dir_getattr() itself.
While we are at it, the same instance has ->permission initialized to
generic_permission, which is what NULL ->permission ends up doing.
Again, no point keeping it.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 8a924db2d7 ("fs: Pass AT_GETATTR_NOSEC flag to getattr interface
function")' introduced the AT_GETATTR_NOSEC flag to ensure that the
call paths only call vfs_getattr_nosec if it is set instead of vfs_getattr.
Now, simplify the getattr interface functions of filesystems where the flag
AT_GETATTR_NOSEC is checked.
There is only a single caller of inode_operations getattr function and it
is located in fs/stat.c in vfs_getattr_nosec. The caller there is the only
one from which the AT_GETATTR_NOSEC flag is passed from.
Two filesystems are checking this flag in .getattr and the flag is always
passed to them unconditionally from only vfs_getattr_nosec:
- ecryptfs: Simplify by always calling vfs_getattr_nosec in
ecryptfs_getattr. From there the flag is passed to no other
function and this function is not called otherwise.
- overlayfs: Simplify by always calling vfs_getattr_nosec in
ovl_getattr. From there the flag is passed to no other
function and this function is not called otherwise.
The query_flags in vfs_getattr_nosec will mask-out AT_GETATTR_NOSEC from
any caller using AT_STATX_SYNC_TYPE as mask so that the flag is not
important inside this function. Also, since no filesystem is checking the
flag anymore, remove the flag entirely now, including the BUG_ON check that
never triggered.
The net change of the changes here combined with the original commit is
that ecryptfs and overlayfs do not call vfs_getattr but only
vfs_getattr_nosec.
Fixes: 8a924db2d7 ("fs: Pass AT_GETATTR_NOSEC flag to getattr interface function")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Closes: https://lore.kernel.org/linux-fsdevel/20241101011724.GN1350452@ZenIV/T/#u
Cc: Tyler Hicks <code@tyhicks.com>
Cc: ecryptfs@vger.kernel.org
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: linux-unionfs@vger.kernel.org
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
LOOKUP_EMPTY is ignored by the only remaining user, and without
that 'getname_' prefix makes no sense.
Remove LOOKUP_EMPTY part, rename to statx_lookup_flags() and make
static. It most likely is _not_ statx() specific, either, but
that's the next step.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
the only thing in flags getname_flags() ever cares about is
LOOKUP_EMPTY; anything else is none of its damn business.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Filesystem options can be retrieved with STATMOUNT_MNT_OPTS, which
returns a string of comma separated options, where some characters are
escaped using the \OOO notation.
Add a new flag, STATMOUNT_OPT_ARRAY, which instead returns the raw
option values separated with '\0' charaters.
Since escaped charaters are rare, this inteface is preferable for
non-libmount users which likley don't want to deal with option
de-escaping.
Example code:
if (st->mask & STATMOUNT_OPT_ARRAY) {
const char *opt = st->str + st->opt_array;
for (unsigned int i = 0; i < st->opt_num; i++) {
printf("opt_array[%i]: <%s>\n", i, opt);
opt += strlen(opt) + 1;
}
}
Example ouput:
(1) mnt_opts: <lowerdir+=/l\054w\054r,lowerdir+=/l\054w\054r1,upperdir=/upp\054r,workdir=/w\054rk,redirect_dir=nofollow,uuid=null>
(2) opt_array[0]: <lowerdir+=/l,w,r>
opt_array[1]: <lowerdir+=/l,w,r1>
opt_array[2]: <upperdir=/upp,r>
opt_array[3]: <workdir=/w,rk>
opt_array[4]: <redirect_dir=nofollow>
opt_array[5]: <uuid=null>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20241112101006.30715-1-mszeredi@redhat.com
Acked-by: Jeff Layton <jlayton@kernel.org>
[brauner: tweak variable naming and parsing add example output]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Starting from LNL, CCS has moved over to flat CCS model where there is
now dedicated memory reserved for storing compression state. On
platforms like LNL this reserved memory lives inside graphics stolen
memory, which is not treated like normal RAM and is therefore skipped by
the core kernel when creating the hibernation image. Currently if
something was compressed and we enter hibernation all the corresponding
CCS state is lost on such HW, resulting in corrupted memory. To fix this
evict user buffers from TT -> SYSTEM to ensure we take a snapshot of the
raw CCS state when entering hibernation, where upon resuming we can
restore the raw CCS state back when next validating the buffer. This has
been confirmed to fix display corruption on LNL when coming back from
hibernation.
Fixes: cbdc52c11c ("drm/xe/xe2: Support flat ccs")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3409
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241112162827.116523-2-matthew.auld@intel.com
(cherry picked from commit c8b3c6db941299d7cc31bd9befed3518fdebaf68)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The GGTT looks to be stored inside stolen memory on igpu which is not
treated as normal RAM. The core kernel skips this memory range when
creating the hibernation image, therefore when coming back from
hibernation the GGTT programming is lost. This seems to cause issues
with broken resume where GuC FW fails to load:
[drm] *ERROR* GT0: load failed: status = 0x400000A0, time = 10ms, freq = 1250MHz (req 1300MHz), done = -1
[drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01
[drm] *ERROR* GT0: firmware signature verification failed
[drm] *ERROR* CRITICAL: Xe has declared device 0000:00:02.0 as wedged.
Current GGTT users are kernel internal and tracked as pinned, so it
should be possible to hook into the existing save/restore logic that we
use for dgpu, where the actual evict is skipped but on restore we
importantly restore the GGTT programming. This has been confirmed to
fix hibernation on at least ADL and MTL, though likely all igpu
platforms are affected.
This also means we have a hole in our testing, where the existing s4
tests only really test the driver hooks, and don't go as far as actually
rebooting and restoring from the hibernation image and in turn powering
down RAM (and therefore losing the contents of stolen).
v2 (Brost)
- Remove extra newline and drop unnecessary parentheses.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3275
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241101170156.213490-2-matthew.auld@intel.com
(cherry picked from commit f2a6b8e396666d97ada8e8759dfb6a69d8df6380)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
GGTT mappings reside on the device and this state is lost during suspend
/ d3cold thus this state must be restored resume regardless if the BO is
in system memory or VRAM.
v2:
- Unnecessary parentheses around bo->placements[0] (Checkpatch)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031182257.2949579-1-matthew.brost@intel.com
(cherry picked from commit a19d1db9a3fa89fabd7c83544b84f393ee9b851f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In couple of places the wrong error handling goto was used to release
locks. Fix these to ensure all locks dropped on exec IOCTL errors.
Cc: Francois Dugast <francois.dugast@intel.com>
Fixes: d16ef1a18e ("drm/xe/exec: Switch hw engine group execution mode upon job submission")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106224944.30130-1-matthew.brost@intel.com
(cherry picked from commit 9e7aacd8402b88394e6a83cb242901fde77a1773)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Use flag output macros in inline asm to allow for better code generation if
the compiler has support for the flag output constraint.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use flag output macros in inline asm to allow for better code generation if
the compiler has support for the flag output constraint.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
