Add rate estimator match. The rate estimator match can match on
estimated rates by the RATEEST target. It supports matching on
absolute bps/pps values, comparing two rate estimators and matching
on the difference between two rate estimators.
This is what I use to route outgoing data connections from a FTP
server over two lines based on the available bandwidth:
# estimate outgoing rates
iptables -t mangle -A POSTROUTING -o eth0 -j RATEEST --rateest-name eth0 \
--rateest-interval 250ms \
--rateest-ewma 0.5s
iptables -t mangle -A POSTROUTING -o ppp0 -j RATEEST --rateest-name ppp0 \
--rateest-interval 250ms \
--rateest-ewma 0.5s
# mark based on available bandwidth
iptables -t mangle -A BALANCE -m state --state NEW \
-m helper --helper ftp \
-m rateest --rateest-delta \
--rateest1 eth0 \
--rateest-bps1 2.5mbit \
--rateest-gt \
--rateest2 ppp0 \
--rateest-bps2 2mbit \
-j CONNMARK --set-mark 0x1
iptables -t mangle -A BALANCE -m state --state NEW \
-m helper --helper ftp \
-m rateest --rateest-delta \
--rateest1 ppp0 \
--rateest-bps1 2mbit \
--rateest-gt \
--rateest2 eth0 \
--rateest-bps2 2.5mbit \
-j CONNMARK --set-mark 0x2
iptables -t mangle -A BALANCE -j CONNMARK --restore-mark
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new rate estimator target (using gen_estimator). In combination with
the rateest match (next patch) this can be used for load-based multipath
routing.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extends the xt_DSCP target by xt_TOS v1 to add support for selectively
setting and flipping any bit in the IPv4 TOS and IPv6 Priority fields.
(ipt_TOS and xt_DSCP only accepted a limited range of possible
values.)
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge ipt_TOS into xt_DSCP.
Merge ipt_TOS (tos v0 target) into xt_DSCP. They both modify the same
field in the IPv4 header, so it seems reasonable to keep them in one
piece. This is part two of the implicit 4-patch series to move tos to
xtables and extend it by IPv6.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge ipt_tos into xt_dscp.
Merge ipt_tos (tos v0 match) into xt_dscp. They both match on the same
field in the IPv4 header, so it seems reasonable to keep them in one
piece. This is part one of the implicit 4-patch series to move tos to
xtables and extend it by IPv6.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unify netfilter match kconfig descriptions
Consistently use lowercase for matches in kconfig one-line
descriptions and name the match module.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
xt_owner merges ipt_owner and ip6t_owner, and adds a flag to match
on socket (non-)existence.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sven Schnelle <svens@bitebene.org>
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix links to files in Documentation/* in various Kconfig files
Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is ipt_time from POM-ng enhanced by the following:
* xtables/ipv6 support
* second granularity for daytime
* day-of-month support (for example "match on the 15th of each month")
* match against UTC or local timezone
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
With NF_CONNTRACK=n, NETFILTER_XT_MATCH_CONNLIMIT=m I get the
following errors on current git:
CC [M] net/netfilter/xt_connlimit.o
In file included from net/netfilter/xt_connlimit.c:27:
include/net/netfilter/nf_conntrack.h💯 error: field 'ct_general' has incomplete type
include/net/netfilter/nf_conntrack.h: In function 'nf_ct_get':
include/net/netfilter/nf_conntrack.h:164: error: 'const struct sk_buff' has no member named 'nfct'
include/net/netfilter/nf_conntrack.h: In function 'nf_ct_put':
include/net/netfilter/nf_conntrack.h:171: warning: implicit declaration of function 'nf_conntrack_put'
include/net/netfilter/nf_conntrack.h: In function 'nf_ct_is_untracked':
include/net/netfilter/nf_conntrack.h:253: error: 'const struct sk_buff' has no member named 'nfct'
In file included from net/netfilter/xt_connlimit.c:28:
include/net/netfilter/nf_conntrack_core.h: In function 'nf_conntrack_confirm':
include/net/netfilter/nf_conntrack_core.h:68: error: 'struct sk_buff' has no member named 'nfct'
Adding a dependency in Kconfig fixes this.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipt_connlimit has been sitting in POM-NG for a long time.
Here is a new shiny xt_connlimit with:
* xtables'ified
* will request the layer3 module
(previously it hotdropped every packet when it was not loaded)
* fixed: there was a deadlock in case of an OOM condition
* support for any layer4 protocol (e.g. UDP/SCTP)
* using jhash, as suggested by Eric Dumazet
* ipv6 support
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TRACE target can be used to follow IP and IPv6 packets through
the ruleset.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick NcHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Along comes... xt_u32, a revamped ipt_u32 from POM-NG,
Plus:
* 2007-06-02: added ipv6 support
* 2007-06-05: uses kmalloc for the big buffer
* 2007-06-05: added inversion
* 2007-06-20: use skb_copy_bits() and get rid of the big buffer
and lock (suggested by Pablo Neira Ayuso)
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation/modules.txt doesn't exist, but
Documentation/kbuild/modules.txt does.
Signed-off-by: Alexander E. Patrakov
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Remove the obsolete IPv4 only connection tracking/NAT as scheduled in
feature-removal-schedule.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
NF_CT_NETLINK=y, NF_NAT=m results in:
LD .tmp_vmlinux1
net/built-in.o: dans la fonction « nfnetlink_parse_nat_proto »:
nf_conntrack_netlink.c:(.text+0x28db9): référence indéfinie vers « nf_nat_proto_find_get »
nf_conntrack_netlink.c:(.text+0x28dd6): référence indéfinie vers « nf_nat_proto_put »
net/built-in.o: dans la fonction « ctnetlink_new_conntrack »:
nf_conntrack_netlink.c:(.text+0x29959): référence indéfinie vers « nf_nat_setup_info »
nf_conntrack_netlink.c:(.text+0x29b35): référence indéfinie vers « nf_nat_setup_info »
nf_conntrack_netlink.c:(.text+0x29cf7): référence indéfinie vers « nf_nat_setup_info »
nf_conntrack_netlink.c:(.text+0x29de2): référence indéfinie vers « nf_nat_setup_info »
make: *** [.tmp_vmlinux1] Erreur 1
Reported by Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of depending on internally needed options and letting users
figure out what is needed, select them when needed:
- IP_NF_IPTABLES, IP_NF_ARPTABLES and IP6_NF_IPTABLES select
NETFILTER_XTABLES
- NETFILTER_XT_TARGET_CONNMARK, NETFILTER_XT_MATCH_CONNMARK and
IP_NF_TARGET_CLUSTERIP select NF_CONNTRACK_MARK
- NETFILTER_XT_MATCH_CONNBYTES selects NF_CT_ACCT
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is nf_conntrack_sane, a netfilter connection tracking helper module
for the SANE protocol used by the 'saned' daemon to make scanners available
via network. The SANE protocol uses separate control & data connections,
similar to passive FTP. The helper module is needed to recognize the data
connection as RELATED to the control one.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix this by letting NF_CONNTRACK_H323 depend on (IPV6 || IPV6=n).
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
IP6_NF_IPTABLES=m, CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y results in a
linker error since ipv6_find_hdr is defined in ip6_tables.c. Fix similar
to Adrian Bunk's H.323 conntrack patch: selecting ip6_tables to be build
as module requires hashlimit to be built as module as well.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Building with INET=n results in
WARNING: "ip_route_output_key" [net/netfilter/nf_conntrack_h323.ko] undefined!
The entire code in net/netfilter is only used for IPv4/IPv6 currently, so
let it depend on INET.
Noticed by Toralf Förster <toralf.foerster@gmx.de>.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Also remove the references to "new connection tracking" from Kconfig.
After some short stabilization period of the new connection tracking
helpers/NAT code the old one will be removed.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv4 and IPv6 capable nf_conntrack port of the TFTP conntrack/NAT helper.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv4 and IPv6 capable nf_conntrack port of the SIP conntrack/NAT helper.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add nf_conntrack port of the PPtP conntrack/NAT helper. Since there seems
to be no IPv6-capable PPtP implementation the helper only support IPv4.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add nf_conntrack port of the NetBIOS name service conntrack helper.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add nf_conntrack port of the IRC conntrack/NAT helper. Since DCC doesn't
support IPv6 yet, the helper is still IPv4 only.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv4 and IPv6 capable nf_conntrack port of the H.323 conntrack/NAT helper.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv4 and IPv6 capable nf_conntrack port of the Amanda conntrack/NAT helper.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Improve the connection tracking selection (well, the user experience,
not really the aesthetics) by offering one option to enable connection
tracking and a choice between the implementations.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new NFLOG target to allow use of nfnetlink_log for both IPv4 and IPv6.
Currently we have two (unsupported by userspace) hacks in the LOG and ULOG
targets to optionally call to the nflog API. They lack a few features,
namely the IPv4 and IPv6 LOG targets can not specify a number of arguments
related to nfnetlink_log, while the ULOG target is only available for IPv4.
Remove those hacks and add a clean way to use nfnetlink_log.
Signed-off-by: Patrick McHardy <kaber@trash.net>
CONNSECMARK needs conntrack, add missing dependency to fix linking error
with CONNSECMARK=y and CONNTRACK=m.
Reported by Toralf Förster <toralf.foerster@gmx.de>.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
xt_physdev depends on bridge netfilter, which is a boolean, but can still
be built modular because of special handling in the bridge makefile. Add
a dependency on BRIDGE to prevent XT_MATCH_PHYSDEV=y, BRIDGE=m.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This replaces IPv4 DSCP target by address family independent version.
This also
- utilizes dsfield.h to get/mangle DS field in IPv4/IPv6 header
- fixes Kconfig help text.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This replaces IPv4 dscp match by address family independent version.
This also
- utilizes dsfield.h to get the DS field in IPv4/IPv6 header, and
- checks for the DSCP value from user space.
- fixes Kconfig help text.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the recent problems with all the SCTP stuff it seems reasonable
to mark this as experimental.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new xtables target, CONNSECMARK, which is used to specify rules
for copying security marks from packets to connections, and for
copyying security marks back from connections to packets. This is
similar to the CONNMARK target, but is more limited in scope in that
it only allows copying of security marks to and from packets, as this
is all it needs to do.
A typical scenario would be to apply a security mark to a 'new' packet
with SECMARK, then copy that to its conntrack via CONNMARK, and then
restore the security mark from the connection to established and
related packets on that connection.
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a secmark field to IP and NF conntracks, so that security markings
on packets can be copied to their associated connections, and also
copied back to packets as required. This is similar to the network
mark field currently used with conntrack, although it is intended for
enforcement of security policy rather than network policy.
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a SECMARK target to xtables, allowing the admin to apply security
marks to packets via both iptables and ip6tables.
The target currently handles SELinux security marking, but can be
extended for other purposes as needed.
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add statistic match which is a combination of the nth and random matches.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This unifies ipt_multiport and ip6t_multiport to xt_multiport.
As a result, this addes support for inversion and port range match
to IPv6 packets.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This unifies ipt_esp and ip6t_esp to xt_esp. Please note that now
a user program needs to specify IPPROTO_ESP as protocol to use esp match
with IPv6. This means that ip6tables requires '-p esp' like iptables.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
