Nest/core pmu units are enabled only when it is used. A reference count is
maintained for the events which uses the nest/core pmu units. Currently in
*_imc_counters_release function a WARN() is used for notification of any
underflow of ref count.
The case where event ref count hit a negative value is, when perf session is
started, followed by offlining of all cpus in a given core.
i.e. in cpuhotplug offline path ppc_core_imc_cpu_offline() function set the
ref->count to zero, if the current cpu which is about to offline is the last
cpu in a given core and make an OPAL call to disable the engine in that core.
And on perf session termination, perf->destroy (core_imc_counters_release) will
first decrement the ref->count for this core and based on the ref->count value
an opal call is made to disable the core-imc engine.
Now, since cpuhotplug path already clears the ref->count for core and disabled
the engine, perf->destroy() decrementing again at event termination make it
negative which in turn fires the WARN_ON. The same happens for nest units.
Add a check to see if the reference count is alreday zero, before decrementing
the count, so that the ref count will not hit a negative value.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul is handling almost all of the powerpc related KVM patches nowadays,
so he should be mentioned in the MAINTAINERS file accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the
guest CR4. Before this CR4 loading, the guest CR4 refers to L2
CR4. Because these two CR4's are in different levels of guest, we
should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which
is used to handle guest writes to its CR4, checks the guest change to
CR4 and may fail if the change is invalid.
The failure may cause trouble. Consider we start
a L1 guest with non-zero L1 PCID in use,
(i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0)
and
a L2 guest with L2 PCID disabled,
(i.e. L2 CR4.PCIDE == 0)
and following events may happen:
1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4
into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because
of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e.
vcpu->arch.cr4) is left to the value of L2 CR4.
2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit,
kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID,
because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1
CR3.PCID != 0, L0 KVM will inject GP to L1 guest.
Fixes: 4704d0befb ("KVM: nVMX: Exiting from L2 to L1")
Cc: qemu-stable@nongnu.org
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A deadlock fix in dummy-hcd; Fixing a use-after-free bug in composite;
Renesas got another fix for DMA programming (this time around a fix
for receiving ZLP); Tegra PHY got a suspend fix; A memory leak on our
configfs ABI got plugged.
Other than these, a couple other minor fixes on usbtest.
-----BEGIN PGP SIGNATURE-----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=uGcr
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
USB: fixes for v4.14-rc5
A deadlock fix in dummy-hcd; Fixing a use-after-free bug in composite;
Renesas got another fix for DMA programming (this time around a fix
for receiving ZLP); Tegra PHY got a suspend fix; A memory leak on our
configfs ABI got plugged.
Other than these, a couple other minor fixes on usbtest.
Exynos SYSMMU registers standard platform device with sysmmu_of_match
table, what means that this table is accessed every time a new platform
device is registered in a system. This might happen also after the boot,
so the table must not be attributed as initconst to avoid potential kernel
oops caused by access to freed memory.
Fixes: 6b21a5db36 ("iommu/exynos: Support for device tree")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- sync_file: Fix race in SYNC_IOC_FILE_INFO (John)
- atomic_helper: Give up reference taken in suspend helper (Jeffy)
Cc: John Einar Reitan <john.reitan@arm.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAlnedhgACgkQcywAJXLc
r3lDCgf+OZv+6L1iN436SjDuNZurYKOZSWOexAoJi6an1OIs9vBsVg43HpAZTnZt
W0pvVpyorJTO/fP9QF82ntY07DwjEmGgq7XykCViL6+w0F080rXrvzGSYIf6cTuu
DJ/e6k0LWgpta1EFGS+sh61Gq6KOBL+MDGwcX+2HGpnLU7IYethQjt7FlC6ww3s0
SkN5Vx1e/b4tbtIVGjrf0VbHxxT3vCdsaJRoGKzct54HceTlnTZ4C4Ah7rQFd8vM
UhUAy6lWY8LyYtp3rKDLky8cS+HUXuUEuATTqzmtzizVLZ68TQP6elJ/Ao5qD76K
sKSM4kikFaRSjOnRB99fBFfjJU3jew==
=J2G/
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2017-10-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Core Changes:
- sync_file: Fix race in SYNC_IOC_FILE_INFO (John)
- atomic_helper: Give up reference taken in suspend helper (Jeffy)
Cc: John Einar Reitan <john.reitan@arm.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
* tag 'drm-misc-fixes-2017-10-11' of git://anongit.freedesktop.org/drm/drm-misc:
sync_file: Return consistent status in SYNC_IOC_FILE_INFO
drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume()
changeset 6bbf7a855d ("media: dvbdev: convert DVB device types into an enum")
added a new warning on gcc 6:
>> drivers/media/dvb-core/dvbdev.c:86:1: warning: control reaches end of non-void function [-Wreturn-type]
That's because gcc is not smart enough to see that all types are
present at the switch. Also, the current code is not too optimized.
So, replace it to a more optimized one, based on a static table.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 6bbf7a855d ("media: dvbdev: convert DVB device types into an enum")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix more return codes for device property: Align return codes of
__acpi_node_get_property_reference().
In particular, what was missed previously:
-EPROTO could be returned in certain cases, now -EINVAL;
-EINVAL was returned if the property was not found, now -ENOENT;
-EINVAL was returned also if the index was higher than the number of
entries in a package, now -ENOENT.
Reported-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Fixes: 3e3119d308 (device property: Introduce fwnode_property_get_reference_args)
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_fwnode_get_reference_args(), the function implementing ACPI
support for fwnode_property_get_reference_args(), returns directly
error codes from __acpi_node_get_property_reference(). The latter
uses different error codes than the OF implementation. In particular,
the OF implementation uses -ENOENT to indicate that the property is
not found, a reference entry is empty and there are no more
references.
Document and align the error codes for property for
fwnode_property_get_reference_args() so that they match with
of_parse_phandle_with_args().
Fixes: 3e3119d308 (device property: Introduce fwnode_property_get_reference_args)
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This corrects two mistakes in the Qualcomm GLINK SMEM driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=W1P1
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v4.14-fixes' of git://github.com/andersson/remoteproc
Pull rpmsg fixes from Bjorn Andersson:
"This corrects two mistakes in the Qualcomm GLINK SMEM driver"
* tag 'rpmsg-v4.14-fixes' of git://github.com/andersson/remoteproc:
rpmsg: glink: Fix memory leak in qcom_glink_alloc_intent()
rpmsg: glink: Unlock on error in qcom_glink_request_intent()
This fixes a couple of issues in the imx_rproc driver and corrects the Kconfig
dependencies of the Qualcomm remoteproc drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KwYX
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.14-fixes' of git://github.com/andersson/remoteproc
Pull remoteproc fixes from Bjorn Andersson:
"This fixes a couple of issues in the imx_rproc driver and corrects the
Kconfig dependencies of the Qualcomm remoteproc drivers"
* tag 'rproc-v4.14-fixes' of git://github.com/andersson/remoteproc:
remoteproc: imx_rproc: fix return value check in imx_rproc_addr_init()
remoteproc: qcom: fix RPMSG_QCOM_GLINK_SMEM dependencies
remoteproc: imx_rproc: fix a couple off by one bugs
Fix a bunch of coding style issues found by checkpatch on the
part of the code that the previous patches touched.
WARNING: please, no space before tabs
+ * ^I^Icallback.$
ERROR: space required before the open parenthesis '('
+ switch(cmd) {
WARNING: line over 80 characters
+ err = dtv_property_process_get(fe, &getp, tvp + i, file);
WARNING: line over 80 characters
+ err = fe->ops.diseqc_recv_slave_reply(fe, (struct dvb_diseqc_slave_reply*) parg);
ERROR: "(foo*)" should be "(foo *)"
+ err = fe->ops.diseqc_recv_slave_reply(fe, (struct dvb_diseqc_slave_reply*) parg);
WARNING: line over 80 characters
+ err = fe->ops.read_signal_strength(fe, (__u16 *) parg);
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
While technically CHV isn't DDI, we do look at the VBT based DDI port
info for HDMI DDC pin and DP AUX channel. (We call these "alternate",
but they're really just something that aren't platform defaults.)
In commit e4ab73a132 ("drm/i915: Respect alternate_ddc_pin for all DDI
ports") Ville writes, "IIRC there may be CHV system that might actually
need this."
I'm not sure why there couldn't be even more platforms that need this,
but start conservative, and parse the info for CHV in addition to DDI.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100553
Reported-by: Marek Wilczewski <mw@3cte.pl>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0815082cb98487618429b62414854137049b888.1506586821.git.jani.nikula@intel.com
(cherry picked from commit 348e4058eb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
That section is too outdated and got superseded by DVBv5 and
by libdvbv5.
Maybe some day we'll end adding updated examples there, but
while nobody has time or interest of doing that, just mention
that there and get rid of the current examples for good.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Jason reported that a corrupted filesystem failed to replay
the log with a metadata block out of bounds warning:
XFS (dm-2): _xfs_buf_find: Block out of range: block 0x80270fff8, EOFS 0x9c40000
_xfs_buf_find() and xfs_btree_get_bufs() return NULL if
that happens, and then when xfs_alloc_fix_freelist() calls
xfs_trans_binval() on that NULL bp, we oops with:
BUG: unable to handle kernel NULL pointer dereference at 00000000000000f8
We don't handle _xfs_buf_find errors very well, every
caller higher up the stack gets to guess at why it failed.
But we should at least handle it somehow, so return
EFSCORRUPTED here.
Reported-by: Jason L Tibbitts III <tibbs@math.uh.edu>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_attr3_root_inactive() walks the attr fork tree to invalidate the
associated blocks. xfs_attr3_node_inactive() recursively descends
from internal blocks to leaf blocks, caching block address values
along the way to revisit parent blocks, locate the next entry and
descend down that branch of the tree.
The code that attempts to reread the parent block is unsafe because
it assumes that the local xfs_da_node_entry pointer remains valid
after an xfs_trans_brelse() and re-read of the parent buffer. Under
heavy memory pressure, it is possible that the buffer has been
reclaimed and reallocated by the time the parent block is reread.
This means that 'btree' can point to an invalid memory address, lead
to a random/garbage value for child_fsb and cause the subsequent
read of the attr fork to go off the rails and return a NULL buffer
for an attr fork offset that is most likely not allocated.
Note that this problem can be manufactured by setting
XFS_ATTR_BTREE_REF to 0 to prevent LRU caching of attr buffers,
creating a file with a multi-level attr fork and removing it to
trigger inactivation.
To address this problem, reinit the node/btree pointers to the
parent buffer after it has been re-read. This ensures btree points
to a valid record and allows the walk to proceed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If we get ENOSPC half way through setting the ACL, the inode mode
can still be changed even though the ACL does not exist. Reorder the
operation to only change the mode of the inode if the ACL is set
correctly.
Whilst this does not fix the problem with crash consistency (that requires
attribute addition to be a deferred op) it does prevent ENOSPC and other
non-fatal errors setting an xattr to be handled sanely.
This fixes xfstests generic/449.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Various utility functions and interfaces that iterate internal
devices try to reference the realtime device even when RT support is
not compiled into the kernel.
Make sure this code is excluded from the CONFIG_XFS_RT=n build,
and where appropriate stub functions to return fatal errors if
they ever get called when RT support is not present.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Prevent kmemcheck from throwing warnings about reading uninitialised
memory when formatting inodes into the incore log buffer. There are
several issues here - we don't always log all the fields in the
inode log format item, and we never log the inode the
di_next_unlinked field.
In the case of the inode log format item, this is exacerbated
by the old xfs_inode_log_format structure padding issue. Hence make
the padded, 64 bit aligned version of the structure the one we always
use for formatting the log and get rid of the 64 bit variant. This
means we'll always log the 64-bit version and so recovery only needs
to convert from the unpadded 32 bit version from older 32 bit
kernels.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The functions used on dvb_demux.h are largely used on DVB drivers.
Yet, none of them are documented.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are three structs defined inside dvb_demux.h. None
of them are currently documented.
Add documentation for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Simplify the get property handling and move it to the existing
code at dtv_property_process_get() directly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Since all properties in the func dtv_property_process_set() use
at most 4 bytes arguments, change the code to pass
u32 cmd and u32 data as function arguments, instead of passing a
pointer to the entire struct dtv_property *tvp.
Instead of having a generic dtv_property_dump(), added its own
properties debug logic in the dtv_property_process_set().
Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com>
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of using an integer to represent it, use boolean,
as this better describes what this field really means.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The struct dvb_demux_filter.doneq is a boolean.
Mark it as such, as it helps to understand what it does.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kernel-doc allows documenting enums. Also, it makes clearer
about the meaning of each field on structures.
So, convert DMX_STATE_* to an enum.
While here, get rid of the unused DMX_STATE_SET.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kernel-doc allows documenting enums. Also, it makes clearer
about the meaning of each field on structures.
So, convert DMX_TYPE_* to an enum.
While here, get rid of the unused DMX_TYPE_PES.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add a cross-reference to a mentioned structure and split
the kernel-doc stuff on a separate chapter.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
WARNING: 'algoritms' may be misspelled - perhaps 'algorithms'?
+responsible for tuning the device. It supports multiple algoritms to
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of document all kAPI into a single file, split it
on multiple ones. That makes easier to maintain each part.
As a side effect, it will produce multiple html pages, with
is a good idea.
No changes at the text. Just some chapter levels changed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Better document the DVB common parts by adding two sections
and an introductory text for each.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several minor adjustments at the kernel-doc markups:
- some syntax fixes;
- some cross-references;
- add cross-references for the mentioned ioctls;
- some constants marked as such.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several functions at the dvbdev that are common to all
digital TV device nodes with aren't documented.
Add documentation for them. No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Enums can be documented via kernel-doc. So, convert the
DVB_DEVICE_* macros to an enum.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several problems with regards to the return of
FE_SET_PROPERTY. The original idea were to return per-property
return codes via tvp->result field, and to return an updated
set of values.
However, that never worked. What's actually implemented is:
- the FE_SET_PROPERTY implementation doesn't call .get_frontend
callback in order to get the actual parameters after return;
- the tvp->result field is only filled if there's no error.
So, it is always filled with zero;
- FE_SET_PROPERTY doesn't call memdup_user() nor any other
copy_to_user() function. So, any changes to the properties
will be lost;
- FE_SET_PROPERTY is declared as a write-only ioctl (IOW).
While we could fix the above, it could cause regressions.
So, let's just assume what the code really does, updating
the documentation accordingly and removing the logic that
would update the discarded tvp->result.
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Two readonly ioctls can't be allowed if the frontend device
is opened in read only mode. Explain why.
Reviewed by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are too much tabs on several properties, for no good
reason. That sounds confusing while reading the struct, so
adjust them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In the past, I guess the idea was to use state in order to
allow an autofush logic. However, in the current code, it is
used only for debug messages, on a poor man's solution, as
there's already a debug message to indicate when the properties
got flushed.
So, just get rid of it for good.
Reviewed-by: Shuah Khan <shuahkg@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, there are two handlers for ioctls:
- dvb_frontend_ioctl_properties()
- dvb_frontend_ioctl_legacy()
Despite their names, both handles non-legacy DVB ioctls.
Besides that, there's no reason why to not handle all ioctls
on a single handler function.
So, merge them into a single function (dvb_frontend_handle_ioctl)
and reorganize the ioctl's to indicate what's the current DVB
API and what's deprecated.
Despite the big diff, the handling logic for each ioctl is the
same as before.
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use a switch() on this function, just like on other ioctl
handlers and handle parameters inside each part of the
switch.
That makes it easier to integrate with the already existing
ioctl handler function.
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
