Commit Graph

298857 Commits

Author SHA1 Message Date
Vaibhav Hiremath
4ce107ccd7 ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions
In the SYSC_TYPE1_XXX_MASK configuration, SYSC_XXX_SHIFT macro
is used which is not defined anywhere in the kernel.
Until now the build was going through successfully, since it
is not being used anywhere in kernel.

This bug got introduced by the commit
358f0e630d ("OMAP3: hwmod: support
to specify the offset position of various SYSCONFIG register bits.")

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-05 02:59:32 -06:00
Rajendra Nayak
f9a2f9c3fa ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status
omap_hwmod_softreset() does not seem to wait for reset status
after doing a softreset. Make it use _ocp_softreset() instead
which does this correctly.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-05 02:59:32 -06:00
Rajendra Nayak
2800852a07 ARM: OMAP2+: hwmod: Restore sysc after a reset
After a softreset, make sure the sysc settings are correctly
restored.

Reported-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Shubhrajyoti D <shubhrajyoti@ti.com>
[paul@pwsan.com: combined post-reset SYSCONFIG reload code into the
 _reset() function to avoid duplication and future mistakes]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-05 02:59:32 -06:00
Govindraj.R
2a1cc1445a ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules
Some modules doesn't have SYSC_HAS_ENAWAKEUP bit available (ex: usb
host uhh module) in absence of this flag
omap_hwmod_enable/disable_wakeup avoids configuring pad mux wakeup
capability.

Configure sysc if SYSC_HAS_ENAWAKEUP is available and for other cases
try enabling/disabling wakeup from mux_pad pins.

Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
[paul@pwsan.com: updated function kerneldoc documentation]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-05 02:59:32 -06:00
RongQing.Li
78d50217ba ipv6: fix array index in ip6_mc_add_src()
Convert array index from the loop bound to the loop index.

And remove the void type conversion to ip6_mc_del1_src() return
code, seem it is unnecessary, since ip6_mc_del1_src() does not
use __must_check similar attribute, no compiler will report the
warning when it is removed.

v2: enrich the commit header

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05 00:00:42 -04:00
Linus Torvalds
43f63c8711 Merge git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  Fix UNC parsing on mount
  Remove unnecessary check for NULL in password parser
  CIFS: Fix VFS lock usage for oplocked files
  Revert "CIFS: Fix VFS lock usage for oplocked files"
  cifs: writing past end of struct in cifs_convert_address()
  cifs: silence compiler warnings showing up with gcc-4.7.0
  CIFS: Fix VFS lock usage for oplocked files
2012-04-04 18:37:09 -07:00
Thadeu Lima de Souza Cascardo
117980c4c9 mlx4: allocate just enough pages instead of always 4 pages
The driver uses a 2-order allocation, which is too much on architectures
like ppc64, which has a 64KiB page. This particular allocation is used
for large packet fragments that may have a size of 512, 1024, 4096 or
fill the whole allocation. So, a minimum size of 16384 is good enough
and will be the same size that is used in architectures of 4KiB sized
pages.

This will avoid allocation failures that we see when the system is under
stress, but still has plenty of memory, like the one below.

This will also allow us to set the interface MTU to higher values like
9000, which was not possible on ppc64 without this patch.

Node 1 DMA: 737*64kB 37*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 51904kB
83137 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap  = 10420096kB
Total swap = 10420096kB
107776 pages RAM
1184 pages reserved
147343 pages shared
28152 pages non-shared
netstat: page allocation failure. order:2, mode:0x4020
Call Trace:
[c0000001a4fa3770] [c000000000012f04] .show_stack+0x74/0x1c0 (unreliable)
[c0000001a4fa3820] [c00000000016af38] .__alloc_pages_nodemask+0x618/0x930
[c0000001a4fa39a0] [c0000000001a71a0] .alloc_pages_current+0xb0/0x170
[c0000001a4fa3a40] [d00000000dcc3e00] .mlx4_en_alloc_frag+0x200/0x240 [mlx4_en]
[c0000001a4fa3b10] [d00000000dcc3f8c] .mlx4_en_complete_rx_desc+0x14c/0x250 [mlx4_en]
[c0000001a4fa3be0] [d00000000dcc4eec] .mlx4_en_process_rx_cq+0x62c/0x850 [mlx4_en]
[c0000001a4fa3d20] [d00000000dcc5150] .mlx4_en_poll_rx_cq+0x40/0x90 [mlx4_en]
[c0000001a4fa3dc0] [c0000000004e2bb8] .net_rx_action+0x178/0x450
[c0000001a4fa3eb0] [c00000000009c9b8] .__do_softirq+0x118/0x290
[c0000001a4fa3f90] [c000000000031df8] .call_do_softirq+0x14/0x24
[c000000184c3b520] [c00000000000e700] .do_softirq+0xf0/0x110
[c000000184c3b5c0] [c00000000009c6d4] .irq_exit+0xb4/0xc0
[c000000184c3b640] [c00000000000e964] .do_IRQ+0x144/0x230

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Tested-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 20:34:29 -04:00
Linus Torvalds
6c216ec636 KGDB/KDB regression fixes
3.4: Fix an an Smatch warning that appeared in the 3.4 merge window
    3.0: Fix kgdb test suite with SMP for all archs without HW single stepping
 2.6.36: Fix kgdb sw breakpoints with CONFIG_DEBUG_RODATA=y limitations on x86
 2.6.26: Fix oops on kgdb test suite with CONFIG_DEBUG_RODATA
         Fix kgdb test suite with SMP for all archs with HW single stepping
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPedocAAoJEIciOldedpOjn7EP/397Rh0zmRlG8oQwMEJcK3E5
 gaRyBNpkGoU3ekHXHx/nzgQ/CS9opzW7nBZDu8weWLjRKMT4RyHfuJcWyu525GvQ
 SnoiX2ZUzP315d8llCYwXmaCEYA7lHQi4T2bGMlDSn1J8kS235EQxllgEfhXDdEC
 DxRWgHABG2UR62C62sGKbPaMMDO9TcNcrAQK27LDLTS7pKLmYqBWBdZKgWzBM/Pr
 AF8vakqSgUw3Aq9qrLge+483uT7uhMoUJofxRppWtm1QgnDcTmri9LOagiazDotz
 RQliRGwVxj9hEo5mLEiQtI0N1kIGCAsK0+9aUJEZRXovRBR9kvqaqHT4c5xdhznr
 VKYvqqTcHBkKLIfNXFvQZnn2cXtNVNqve9CZZwdBJaFYEkaR7ZVQqE6f2xq8KAb2
 RmhvzlEUyLU+89YKkH66uSa22VLSazkeH+4b8AJ4JxYDEab3BHoBCe8axcBQrTsj
 7X5NOs7V3Oj+4J3bS1fbUbxq4t0dfpLLyg8e/lELWtT+Kq7nQRzA2XHRZAMTve8M
 T0cTdrwtUbgY9ZMTpywNB2KlPgTvhWOyfYbH6/Kcks7ecSXlkow3edXoiUbw79iE
 hP8vcMWbT2Rv3IbLkSMFZEQGAG9qL1YyGv4NDmLOoljO1c/Bi3WQIR5aI+di6asV
 Z5q5s/bmGa4+OhFFITSd
 =SW2N
 -----END PGP SIGNATURE-----

Merge tag 'for_linus-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb

Pull KGDB/KDB regression fixes from Jason Wessel:
 - Fix a Smatch warning that appeared in the 3.4 merge window
 - Fix kgdb test suite with SMP for all archs without HW single stepping
 - Fix kgdb sw breakpoints with CONFIG_DEBUG_RODATA=y limitations on x86
 - Fix oops on kgdb test suite with CONFIG_DEBUG_RODATA
 - Fix kgdb test suite with SMP for all archs with HW single stepping

* tag 'for_linus-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  x86,kgdb: Fix DEBUG_RODATA limitation using text_poke()
  kgdb,debug_core: pass the breakpoint struct instead of address and memory
  kgdbts: (2 of 2) fix single step awareness to work correctly with SMP
  kgdbts: (1 of 2) fix single step awareness to work correctly with SMP
  kgdbts: Fix kernel oops with CONFIG_DEBUG_RODATA
  kdb: Fix smatch warning on dbg_io_ops->is_console
2012-04-04 17:26:08 -07:00
Linus Torvalds
58bca4a8fa Merge branch 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA mapping branch from Marek Szyprowski:
 "Short summary for the whole series:

  A few limitations have been identified in the current dma-mapping
  design and its implementations for various architectures.  There exist
  more than one function for allocating and freeing the buffers:
  currently these 3 are used dma_{alloc, free}_coherent,
  dma_{alloc,free}_writecombine, dma_{alloc,free}_noncoherent.

  For most of the systems these calls are almost equivalent and can be
  interchanged.  For others, especially the truly non-coherent ones
  (like ARM), the difference can be easily noticed in overall driver
  performance.  Sadly not all architectures provide implementations for
  all of them, so the drivers might need to be adapted and cannot be
  easily shared between different architectures.  The provided patches
  unify all these functions and hide the differences under the already
  existing dma attributes concept.  The thread with more references is
  available here:

    http://www.spinics.net/lists/linux-sh/msg09777.html

  These patches are also a prerequisite for unifying DMA-mapping
  implementation on ARM architecture with the common one provided by
  dma_map_ops structure and extending it with IOMMU support.  More
  information is available in the following thread:

    http://thread.gmane.org/gmane.linux.kernel.cross-arch/12819

  More works on dma-mapping framework are planned, especially in the
  area of buffer sharing and managing the shared mappings (together with
  the recently introduced dma_buf interface: commit d15bd7ee44
  "dma-buf: Introduce dma buffer sharing mechanism").

  The patches in the current set introduce a new alloc/free methods
  (with support for memory attributes) in dma_map_ops structure, which
  will later replace dma_alloc_coherent and dma_alloc_writecombine
  functions."

People finally started piping up with support for merging this, so I'm
merging it as the last of the pending stuff from the merge window.
Looks like pohmelfs is going to wait for 3.5 and more external support
for merging.

* 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  common: DMA-mapping: add NON-CONSISTENT attribute
  common: DMA-mapping: add WRITE_COMBINE attribute
  common: dma-mapping: introduce mmap method
  common: dma-mapping: remove old alloc_coherent and free_coherent methods
  Hexagon: adapt for dma_map_ops changes
  Unicore32: adapt for dma_map_ops changes
  Microblaze: adapt for dma_map_ops changes
  SH: adapt for dma_map_ops changes
  Alpha: adapt for dma_map_ops changes
  SPARC: adapt for dma_map_ops changes
  PowerPC: adapt for dma_map_ops changes
  MIPS: adapt for dma_map_ops changes
  X86 & IA64: adapt for dma_map_ops changes
  common: dma-mapping: introduce generic alloc() and free() methods
2012-04-04 17:13:43 -07:00
Marc Kleine-Budde
03f2eecdfc stmmac: re-add IFF_UNICAST_FLT for dwmac1000
In commit (bfab27a stmmac: add the experimental PCI support) the
IFF_UNICAST_FLT flag has been removed from the stmmac_mac_device_setup()
function. This patch re-adds the flag.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:38:31 -04:00
Yaniv Rosner
ca7b91bbd1 bnx2x: Clear MDC/MDIO warning message
This patch clears a warning message of "MDC/MDIO access timeout" which may
appear when interface is loaded due to missing clock setting before resetting
the LED, and starting periodic function too early.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:24:23 -04:00
Yaniv Rosner
f93fb01628 bnx2x: Fix BCM57711+BCM84823 link issue
Fix a link problem on the second port of BCM57711 + BCM84823 boards due to
incorrect macro usage.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:24:23 -04:00
Yaniv Rosner
99bf7f3436 bnx2x: Clear BCM84833 LED after fan failure
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:24:23 -04:00
Yaniv Rosner
8267bbb01f bnx2x: Fix BCM84833 PHY FW version presentation
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:24:23 -04:00
Yaniv Rosner
59a2e53b82 bnx2x: Fix link issue for BCM8727 boards.
This patch fixes a link problem on BCM57712 + BCM8727 designs in which the TX
laser is controller by GPIO, after 1.60.xx drivers were previously loaded.
On these designs the TX_LASER is enabled by logic AND between the PHY
(through MDIO), and the GPIO. When an old driver is used, it disables the
MDIO part, hence the GPIO control had no affect de facto.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:24:23 -04:00
Yaniv Rosner
9379c9be4b bnx2x: Restore 1G LED on BCM57712+BCM8727 designs.
Fix no-LED problem when link speed is 1G on BCM57712 + BCM8727 designs, by
removing a logic error checking for a different PHY.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:24:23 -04:00
Yaniv Rosner
25182fc222 bnx2x: Fix BCM578x0-SFI pre-emphasis settings
Fix 578x0-SFI pre-emphasis settings per HW recommendations to achieve better
link strength.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:24:22 -04:00
Yaniv Rosner
6a51c0d17b bnx2x: Fix BCM57810-KR AN speed transition
BCM57810-KR link may not come up in 1G after running loopback test, so set
the relevant registers to their default values before starting KR autoneg.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:24:22 -04:00
Yaniv Rosner
ca05f29cf5 bnx2x: Fix BCM57810-KR FC
Fix 57810-KR flow-control handling link is achieved via CL37 AN.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:24:22 -04:00
Yaniv Rosner
27d9129f5a bnx2x: PFC fix
Fix a problem in which PFC frames are not honored, due to incorrect link
attributes synchronization following PMF migration, and verify PFC XON is not
stuck from previous link change.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:24:22 -04:00
stephen hemminger
857504d06d sky2: copy received packets on inefficient unaligned architecture
Modified from original patch from Chris.

The sky2 driver has to have 8 byte alignment of receive buffer
on some chip versions. On architectures which don't support efficient
unaligned access this doesn't work very well. The solution is to
just copy all received packets which is what the driver already
does for small packets.

This allows the driver to be used on the Tilera TILEmpower-Gx, since
the tile architecture doesn't currently handle kernel unaligned accesses,
just userspace.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:14:04 -04:00
Shlomo Pongratz
234bcf8a49 net/bonding: correctly proxy slave neigh param setup ndo function
The current implemenation was buggy for slaves who use ndo_neigh_setup,
since the networking stack invokes the bonding device ndo entry (from
neigh_params_alloc) before any devices are enslaved, and the bonding
driver can't further delegate the call at that point in time. As a
result when bonding IPoIB devices, the neigh_cleanup hasn't been called.

Fix that by deferring the actual call into the slave ndo_neigh_setup
from the time the bonding neigh_setup is called.

Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:11:12 -04:00
Shlomo Pongratz
2af73d4b2a net/bonding: emit address change event also in bond_release
commit 7d26bb103c "bonding: emit event when bonding changes MAC" didn't
take care to emit the NETDEV_CHANGEADDR event in bond_release, where bonding
actually changes the mac address (to all zeroes). As a result the neighbours
aren't deleted by the core networking code (which does so upon getting that
event).

Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:11:12 -04:00
Thomas Graf
acdd598536 sctp: Allow struct sctp_event_subscribe to grow without breaking binaries
getsockopt(..., SCTP_EVENTS, ...) performs a length check and returns
an error if the user provides less bytes than the size of struct
sctp_event_subscribe.

Struct sctp_event_subscribe needs to be extended by an u8 for every
new event or notification type that is added.

This obviously makes getsockopt fail for binaries that are compiled
against an older versions of <net/sctp/user.h> which do not contain
all event types.

This patch changes getsockopt behaviour to no longer return an error
if not enough bytes are being provided by the user. Instead, it
returns as much of sctp_event_subscribe as fits into the provided buffer.

This leads to the new behavior that users see what they have been aware
of at compile time.

The setsockopt(..., SCTP_EVENTS, ...) API is already behaving like this.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:05:02 -04:00
Linus Torvalds
64ebe98731 More power management updates for 3.4
Fixes mostly, including:
 
 * Patch series that hopefully fixes races between the freezer and request_firmware()
   and request_firmware_nowait() for good, with two cleanups from Stephen Boyd on top.
 
 * Runtime PM fix from Alan Stern preventing tasks from getting stuck indefinitely
   in the runtime PM wait queue.
 
 * Device PM QoS update from MyungJoo Ham introducing a new variant of
   pm_qos_update_request() allowing the callers to specify a timeout.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPdmPZAAoJEKhOf7ml8uNsvcgQAIKBya3ESVg2PbB1riIRJ0M5
 3R5ntbQ0sxa631lIoipZLP6HeN2fgTcfTqhHpr9/dtt80Zh/HbNWee4XEmkJvGOK
 UuG/Vzg2IJA2LKYbRDEALm9GwvlG8ylIrz1mWOSt77K+seyjnvCyfQsoVd5S/+sz
 bzDCwIJlV/lvtynvAMfaZ+O75XW1uYRJ6a1ABviEU4o+J7OC9UCp0h/b9c1WZqDJ
 1X0pBU0/28ZFnYnK+zuAqwJg7pua/HrC0nT/pQTRSZ0kXAgt7uuqIlpVz9HXiqzu
 TVbu3uW6FPWT0TP/iFmKMA1eiQJHLXgshECaccVOoMzIG/pqYTNbfu9BzEho3tL9
 w716ruo1JoythvnlIz4j8R2RtiE8SxTzCqGm4OHcie72VUSqduIhWgRyZOFhebUo
 xqiUSN2cyYUf9SJoeg0TSmQdutoa7vnswZgq4qjlOz39OPxHrwAe5ROXIBwoHvnz
 akmBtnabyNVsRiLe9eIH5N5C9TxHDgZwS70SMYqo1D09Qo+NTUtvSVgC/NiIjhXb
 yY3UliDqGlkUhHJ+8ydntNb39VU4L1MO0IGzEvmvfXvSIcXavGkkmd9RV9yytLEK
 1ujq99NHITzxyuF2+bNGpPQVEVH3sQgAv/doFTiEZiUHIIAy5Fmy/+ipcurslXLm
 urlq4RLG+JXgPjw4XO14
 =ligR
 -----END PGP SIGNATURE-----

Merge tag 'pm-for-3.4-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 - Patch series that hopefully fixes races between the freezer and
   request_firmware() and request_firmware_nowait() for good, with two
   cleanups from Stephen Boyd on top.
 - Runtime PM fix from Alan Stern preventing tasks from getting stuck
   indefinitely in the runtime PM wait queue.
 - Device PM QoS update from MyungJoo Ham introducing a new variant of
   pm_qos_update_request() allowing the callers to specify a timeout.

* tag 'pm-for-3.4-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: add pm_qos_update_request_timeout() API
  firmware_class: Move request_firmware_nowait() to workqueues
  firmware_class: Reorganize fw_create_instance()
  PM / Sleep: Mitigate race between the freezer and request_firmware()
  PM / Sleep: Move disabling of usermode helpers to the freezer
  PM / Hibernate: Disable usermode helpers right before freezing tasks
  firmware_class: Do not warn that system is not ready from async loads
  firmware_class: Split _request_firmware() into three functions, v2
  firmware_class: Rework usermodehelper check
  PM / Runtime: don't forget to wake up waitqueue on failure
2012-04-04 14:26:40 -07:00
Paul Walmsley
5897a391d4 ARM: OMAP3: clock data: fill in some missing clockdomains
Several clocks are missing clockdomains.  This can cause problems with
the hwmod and power management code.  Fill these in.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Matt Porter <mporter@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
2012-04-04 14:52:49 -06:00
Rajendra Nayak
6c4a057bff ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock
All DPLLs except USB are in ALWON powerdomain. Make sure the
clkdm/pwrdm for USB DPLL (l3init) is turned on before attempting
a DPLL relock. So, mark the database accordingly.

Without this fix, it was seen that DPLL relock fails while testing
relock in a loop of USB DPLL.

Cc: Nishanth Menon <nm@ti.com>
Tested-by: Ameya Palande <ameya.palande@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04 14:52:49 -06:00
Ameya Palande
91a290c457 ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL
According to OMAP4 TRM Table 3-1183, CM_CLKSEL_DPLL_USB register defines
following fields for multiplication and division factors:

DPLL_MULT (bits 19:8) DPLL multiplier factor (2 to 4095)
DPLL_DIV (bits 7:0) DPLL divider factor (0 to 255)

Acked-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Ameya Palande <ameya.palande@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04 14:52:49 -06:00
Santosh Shilimkar
8b8c3c7895 ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()
Commit b1cbdb00d ("OMAP: clockdomain: Wait for powerdomain to be ON
when using clockdomain force wakeup") was assuming that
pwrdm_state_switch() does wait for the powerdomain transition which is
not the case.  The missing wait for the powerdomain transition
violates the sequence which the hardware expects, which causes power
management failures on some devices.

Fix this API by adding the pwrdm_wait_transition().

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
[paul@pwsan.com: added some more details in the commit log]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-04-04 14:44:13 -06:00
Stephen Warren
4a3398ee9d gpio: tegra: Iterate over the correct number of banks
When Tegra30 support was added to the Tegra GPIO driver, a few places
which iterated over all banks were not converted to use the variable
tegra_gpio_bank_count rather than hard-coding the bank count. Fix this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
2012-04-04 13:13:18 -06:00
Stephen Warren
5c1e2c9dc6 gpio: tegra: fix register address calculations for Tegra30
Tegra20 and Tegra30 share the same register layout within registers, but
the addresses of the registers is a little different. Fix the driver to
cope with this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
2012-04-04 13:13:13 -06:00
Linus Torvalds
a5149bf3fe Merge branch 'selinux' ("struct common_audit_data" sanitizer)
Merge common_audit_data cleanup patches from Eric Paris.

This is really too late, but it's a long-overdue cleanup of the costly
wrapper functions for the security layer.

The "struct common_audit_data" is used all over in critical paths,
allocated and initialized on the stack.  And used to be much too large,
causing not only unnecessarily big stack frames but the clearing of the
(mostly useless) data was also very visible in profiles.

As a particular example, in one microbenchmark for just doing "stat()"
over files a lot, selinux_inode_permission() used 7% of the CPU time.
That's despite the fact that it doesn't actually *do* anything: it is
just a helper wrapper function in the selinux security layer.

This patch-series shrinks "struct common_audit_data" sufficiently that
code generation for these kinds of wrapper functions is improved
noticeably, and we spend much less time just initializing data that we
will never use.

The functions still get called all the time, and it still shows up at
3.5+% in my microbenchmark, but it's quite a bit lower down the list,
and much less noticeable.

* Emailed patches from Eric Paris <eparis@redhat.com>:
  lsm_audit: don't specify the audit pre/post callbacks in 'struct common_audit_data'
  SELinux: do not allocate stack space for AVC data unless needed
  SELinux: remove avd from slow_avc_audit()
  SELinux: remove avd from selinux_audit_data
  LSM: shrink the common_audit_data data union
  LSM: shrink sizeof LSM specific portion of common_audit_data
2012-04-04 10:11:24 -07:00
Linus Torvalds
3ff8f932bc A simple bug that's been lurking for a while but not terribly visible
since a high proportion of chips have no register 0 so the normal
 failure is that we end up doing a bit of extra I/O.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPeDKyAAoJEBus8iNuMP3dWh0P/A6sU2uMAYARug09o30JqN7E
 kwHbDvoAkEnn89t8vzaLf36527j+n6Pi1+m/GXt0O2SrzySY9iGsW5FOsGnrnWNV
 fTSPN0ATiAegjHRjf5IWIh9onilJNQ0Tr/jbYguaNrtbr3uGMqfctSdCJimz2Tm+
 VXTfQhOypNYrHWAgWpO9ioaERyuQ54IhZ11g7WUCQV4GAGeahLMcXqiBO1LFktN/
 HUynGqNBj3mMQRxy/ko74hNiXwOLiCV5FcnY9ycUn0a2Vnh/7vskavyPuIxblYNs
 N9YdtLxGxiOvXqvEmMTnigLxJT5sEKoivbesux7p99Nn0DVHvjdU07MF0tP16Ylk
 sxzdgwXkchIgMtZ4vdn45KVkAcI4mKHdU0Ggu8ax94cEZkyKFUJlgonwVybHW0lB
 75+Mv8nLqsD8DKobvCcZ8cuFRfGASqZEbqHvHZvd3IbhfRGYRWykDtxRvieWVe0v
 s7jB9hjSYNJQBDf3EF6oBHxuoAlmZ7m5afNcCFyrw5RzcP1kTyW5iqlCBP0cOm0s
 CrZOWjX54T51eqjBSHHK8c98AzKLsmwhalw1j20hA/+5WsIbp5owUpWyQMaKMW2f
 85qBd8OCvQnh7D5Z9GPhkEf5Vl+4WGfE3BhL8JPHVIPGE7t3nSNlFqS4rETdoqDi
 mhBOX9cUIoQkb+L44Dv+
 =i2aW
 -----END PGP SIGNATURE-----

Merge tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull a single regmap fix from Mark Brown:
 "A simple bug that's been lurking for a while but not terribly visible
  since a high proportion of chips have no register 0 so the normal
  failure is that we end up doing a bit of extra I/O."

* tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: rbtree: Fix register default look-up in sync
2012-04-04 10:10:14 -07:00
Linus Torvalds
4a1e8ebc5e regulator: Fixes for -rc1
A bunch of smallish fixes that came up during the merge window as
 things got more testing - even more fixes from Axel, a fix for error
 handling in more complex systems using -EPROBE_DEFER and a couple of
 small fixes for the new dummy regulators.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPeDhzAAoJEBus8iNuMP3dh3sP/2i2M34Y66HkNGJCbkLgzGsu
 DlwbiNdh+o/uUcALCcyt7tYF06MhsJ4n7fOBRZ+hKr3VMTguHi6B36IKxGrfzBJs
 9XoYQkyO/92g3UjdWQSWKSQfx/qZhw167gmmeL8jQfEQOZZ2MhnCLbbZVsRMFGf6
 PzVDyW0StDWh0uBP6P7UU64pogFfUqSO/guIAqppUI9Ll/ulx0OqY+eov2mQzlmg
 Rqwjt9mF9UMZn4/Br0mQx+iUqqSugtA+2VAAiSx7K8JDjeMPh47S31p/FGCLXrmv
 Lbn2vQGn23RDthdxQlcisY/rJU5WsJbgdjjoppucyYJbYUWzVVMNM0djxtpGIQ7j
 x9X6ZTdG4RuphI5FDku/vKkNS4O/Y0+6bumpqFfXyBoAGOXMKdUmTymCNCogFnOy
 F6vMzrtA27M5HaFaRP3xnMSNU/aBegsgCoEjyQ1b5D1TAKvc5v614cZzyrWaCd+G
 gVE1lDIAo2snraRjZl9LDQwGKOkzEdLXJSzGZ7Pk9n54+QvRBJcYu3l/Wdrn4JES
 jtIprAyWbY4z6n5wuucwwjFZa2UtBukRTV8ZA/jMq+eig3VdN8CSKJCJUQTG+UgV
 fyCNq7WWAhK8rldcjgJhPspEbRazAEnaNwfZUWZAmmnb8bVVRO6pJOl2TiRN0DFt
 8MqdrQtJFusRXgrc+Wlq
 =h5VJ
 -----END PGP SIGNATURE-----

Merge tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A bunch of smallish fixes that came up during the merge window as
  things got more testing - even more fixes from Axel, a fix for error
  handling in more complex systems using -EPROBE_DEFER and a couple of
  small fixes for the new dummy regulators."

* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Remove non-existent parameter from fixed-helper.c kernel doc
  regulator: Fix setting new voltage in s5m8767_set_voltage
  regulator: fix sysfs name collision between dummy and fixed dummy regulator
  regulator: Fix deadlock on removal of regulators with supplies
  regulator: Fix comments in include/linux/regulator/machine.h
  regulator: Only update [LDOx|DCx]_HIB_MODE bits in wm8350_[ldo|dcdc]_set_suspend_disable
  regulator: Fix setting low power mode for wm831x aldo
  regulator: Return microamps in wm8350_isink_get_current
  regulator: wm8350: Fix the logic to choose best current limit setting
  regulator: wm831x-isink: Fix the logic to choose best current limit setting
  regulator: wm831x-dcdc: Fix the logic to choose best current limit setting
  regulator: anatop: patching to device-tree property "reg".
  regulator: Do proper shift to set correct bit for DC[2|5]_HIB_MODE setting
  regulator: Fix restoring pmic.dcdcx_hib_mode settings in wm8350_dcdc_set_suspend_enable
  regulator: Fix unbalanced lock/unlock in mc13892_regulator_probe error path
  regulator: Fix set and get current limit for wm831x_buckv
  regulator: tps6586x: Fix list minimal voltage setting for LDO0
2012-04-04 10:09:30 -07:00
Kukjin Kim
2d1f6310d4 EXYNOS: fix dependency for EXYNOS_CPUFREQ
This fixes the CPUFREQ dependency for regarding EXYNOS SoCs
such as EXYNOS4210, EXYNOS4X12 and EXYNOS5250. Its cpufreq
driver should be built with selection of SoC arch part.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-04 10:09:03 -07:00
Linus Torvalds
66cfb32772 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/p4: Add format attributes
  tracing, sched, vfs: Fix 'old_pid' usage in trace_sched_process_exec()
2012-04-04 10:04:42 -07:00
Linus Torvalds
6742259866 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kvm: Call restore_sched_clock_state() only after %gs is initialized
  x86: Use -mno-avx when available
  x86: Remove the ancient and deprecated disable_hlt() and enable_hlt() facility
  x86: Preserve lazy irq disable semantics in fixup_irqs()
2012-04-04 10:04:01 -07:00
Ludovic Desroches
dcce6ce802 ARM: at91: dt: remove unit-address part for memory nodes
Because of the inclusion of skeleton.dtsi, the memory node is
named "memory" we where not modifying the already included one
but creating a new one. It caused bad memory node detection during
early_init_dt_scan_memory() so we modify them.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: devicetree-discuss@lists.ozlabs.org
2012-04-04 18:35:52 +02:00
Nicolas Ferre
0c2c1f624d ARM: at91: fix check of valid GPIO for SPI and USB
SPI chip select pins have to be checked by gpio_is_valid().
The USB host overcurrent_pin checking was missing.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-04-04 18:35:52 +02:00
Nicolas Ferre
9475375a5e USB: ehci-atmel: add needed of.h header file
Compilation error in case of non-DT configuration without this
of.h header file.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2012-04-04 18:35:43 +02:00
Nicolas Ferre
c16524e6a9 ARM: at91/NAND DT bindings: add comments
Add comments to NAND "gpios" property to make it clearer.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-04-04 18:35:42 +02:00
Nicolas Ferre
4352808cfd ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-04-04 18:35:42 +02:00
Nicolas Ferre
1887ab2bf2 USB: ohci-at91: trivial return code name change
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2012-04-04 18:35:33 +02:00
Nicolas Ferre
0ee6d1eeef USB: ohci-at91: change maximum number of ports
Change number of ports to 3 for newer SoCs. Modify pdata structure
and ohci-at91 code that was dealing with ports information and check
of port indexes.
Several coding style errors have been addresses as the patch was touching
affected lines of code and was producing errors while run through
checkpatch.pl.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2012-04-04 18:35:24 +02:00
Nicolas Ferre
aaf9f5fc67 USB: ohci-at91: rework and fix initialization
The DT information are filled in a pdata structure and then passed on
to the usual check code of the probe function. Thus we do not need to
redo the gpio checking and irq configuration in the DT-related code.
On the other hand, we setup GPIO direction in driver for vbus and
overcurrent. It will be useful when moving to pinctrl subsystem.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2012-04-04 18:35:15 +02:00
Nicolas Ferre
74adcb2106 ARM: at91/dts: USB host vbus is active low
Change vbus gpio configuration in .dts files to switch to
active low configuration.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: stable <stable@vger.kernel.org>
2012-04-04 18:35:14 +02:00
Nicolas Ferre
cca0355a09 ARM: at91/USB host: specify and handle properly vbus_pin_active_low
Due to an error while handling vbus_pin_active_low in ohci-at91 driver,
the specification of this property was not good in devices/board files.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: stable <stable@vger.kernel.org>         [3.2+]
2012-04-04 18:35:14 +02:00
Nicolas Ferre
1e7caf8bcf USB: ohci-at91: fix vbus_pin_active_low handling
The information is not properly taken into account
for {get|set}_power() functions.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>		[3.2+]
2012-04-04 18:34:43 +02:00
Dima Zavin
6aa51068f5 ARM: EXYNOS: use chip_id reg in uncompress to select uart base phys
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-04 09:27:37 -07:00
Colin Cross
fd9abe1b5b ARM: EXYNOS: fix CONFIG_DEBUG_LL
addruart cannot read from the physical address of the chipid
register, that will fail as soon as the mmu is turned on.
Fixing it to read from the physical or virtual address depending
on the mmu state also does not work, because there is a period
between head.S and exynos_map_io where the mmu is on, the uart
is mapped and used, but the chipid mapping is not yet present.

Fix addruart to use the ARM Main ID cp15 register to determine
if the core is Cortex A15 (EXYNOS5) or not (EXYNOS4).

Signed-off-by: Colin Cross <ccross@android.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-04 09:27:19 -07:00