As a SIGP STOP is an interrupt with the least priority, it may only result
in stop of the vcpu when no other interrupts are left pending.
To detect whether a non-stop irq is pending, we need a way to mask out
stop irqs from the general kvm_cpu_has_interrupt() function. For this
reason, the existing function (with an outdated name) is replaced by
kvm_s390_vcpu_has_irq() which allows to mask out pending stop irqs.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch removes the famous action_bits and moves the handling of
SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt.
The new local interrupt infrastructure is used to track pending stop
requests.
STOP irqs are the only irqs that don't get actively delivered. They
remain pending until the stop function is executed (=stop intercept).
If another STOP irq is already pending, -EBUSY will now be returned
(needed for the SIGP handling code).
Migration of pending SIGP STOP (AND STORE STATUS) orders should now
be supported out of the box.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In order to get rid of the action_flags and to properly migrate pending SIGP
STOP irqs triggered e.g. by SIGP STOP AND STORE STATUS, we need to remember
whether to store the status when stopping.
For this reason, a new parameter (flags) for the SIGP STOP irq is introduced.
These flags further define details of the requested STOP and can be easily
migrated.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Patch 0759d0681c ("KVM: s390: cleanup handle_wait by reusing
kvm_vcpu_block") changed the way pending guest clock comparator
interrupts are detected. It was assumed that as soon as the hrtimer
wakes up, the condition for the guest ckc is satisfied.
This is however only true as long as adjclock() doesn't speed
up the monotonic clock. Reason is that the hrtimer is based on
CLOCK_MONOTONIC, the guest clock comparator detection is based
on the raw TOD clock. If CLOCK_MONOTONIC runs faster than the
TOD clock, the hrtimer wakes the target VCPU up too early and
the target VCPU will not detect any pending interrupts, therefore
going back to sleep. It will never be woken up again because the
hrtimer has finished. The VCPU is stuck.
As a quick fix, we have to forward the hrtimer until the guest
clock comparator is really due, to guarantee properly timed wake
ups.
As the hrtimer callback might be triggered on another cpu, we
have to make sure that the timer is really stopped and not currently
executing the callback on another cpu. This can happen if the vcpu
thread is scheduled onto another physical cpu, but the timer base
is not migrated. So lets use hrtimer_cancel instead of try_to_cancel.
A proper fix might be to introduce a RAW based hrtimer.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The hrtimer that handles the wait with enabled timer interrupts
should not be disturbed by changes of the host time.
This patch changes our hrtimer to be based on a monotonic clock.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We sometimes get an underflow for the sleep duration, which most
likely won't result in the short sleep time we wanted.
So let's check for sleep duration underflows and directly continue
to run the guest if we get one.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
With commit c6c956b80b ("KVM: s390/mm: support gmap page tables with less
than 5 levels") we are able to define a limit for the guest memory size.
As we round up the guest size in respect to the levels of page tables
we get to guest limits of: 2048 MB, 4096 GB, 8192 TB and 16384 PB.
We currently limit the guest size to 16 TB, which means we end up
creating a page table structure supporting guest sizes up to 8192 TB.
This patch introduces an interface that allows userspace to tune
this limit. This may bring performance improvements for small guests.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As we will allow in a later patch to recreate gmaps with new limits,
we need to make sure that vcpus get their reference for that gmap
after they increased the online_vcpu counter, so there is no possible race.
While we are doing this, we also can simplify the vcpu_init function, by
moving ucontrol specifics to an own function.
That way we also start now setting the kvm_valid_regs for the ucontrol path.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
sparse rightfully complains about
warning: symbol '__inject_extcall' was not declared. Should it be static?
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The return value of kvm_arch_vcpu_postcreate is not checked in its
caller. This is okay, because only x86 provides vcpu_postcreate right
now and it could only fail if vcpu_load failed. But that is not
possible during KVM_CREATE_VCPU (kvm_arch_vcpu_load is void, too), so
just get rid of the unchecked return value.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As discussed on LKML http://marc.info/?i=54611D86.4040306%40de.ibm.com
ACCESS_ONCE might fail with specific compilers for non-scalar accesses.
Here is a set of patches to tackle that problem.
The first patch introduce READ_ONCE and ASSIGN_ONCE. If the data structure
is larger than the machine word size memcpy is used and a warning is emitted.
The next patches fix up several in-tree users of ACCESS_ONCE on non-scalar
types.
This merge does not yet contain a patch that forces ACCESS_ONCE to work only
on scalar types. This is targetted for the next merge window as Linux next
already contains new offenders regarding ACCESS_ONCE vs. non-scalar types.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=IQ5o
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux
Pull ACCESS_ONCE cleanup preparation from Christian Borntraeger:
"kernel: Provide READ_ONCE and ASSIGN_ONCE
As discussed on LKML http://marc.info/?i=54611D86.4040306%40de.ibm.com
ACCESS_ONCE might fail with specific compilers for non-scalar
accesses.
Here is a set of patches to tackle that problem.
The first patch introduce READ_ONCE and ASSIGN_ONCE. If the data
structure is larger than the machine word size memcpy is used and a
warning is emitted. The next patches fix up several in-tree users of
ACCESS_ONCE on non-scalar types.
This does not yet contain a patch that forces ACCESS_ONCE to work only
on scalar types. This is targetted for the next merge window as Linux
next already contains new offenders regarding ACCESS_ONCE vs.
non-scalar types"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux:
s390/kvm: REPLACE barrier fixup with READ_ONCE
arm/spinlock: Replace ACCESS_ONCE with READ_ONCE
arm64/spinlock: Replace ACCESS_ONCE READ_ONCE
mips/gup: Replace ACCESS_ONCE with READ_ONCE
x86/gup: Replace ACCESS_ONCE with READ_ONCE
x86/spinlock: Replace ACCESS_ONCE with READ_ONCE
mm: replace ACCESS_ONCE with READ_ONCE or barriers
kernel: Provide READ_ONCE and ASSIGN_ONCE
- spring cleaning: removed support for IA64, and for hardware-assisted
virtualization on the PPC970
- ARM, PPC, s390 all had only small fixes
For x86:
- small performance improvements (though only on weird guests)
- usual round of hardware-compliancy fixes from Nadav
- APICv fixes
- XSAVES support for hosts and guests. XSAVES hosts were broken because
the (non-KVM) XSAVES patches inadvertently changed the KVM userspace
ABI whenever XSAVES was enabled; hence, this part is going to stable.
Guest support is just a matter of exposing the feature and CPUID leaves
support.
Right now KVM is broken for PPC BookE in your tree (doesn't compile).
I'll reply to the pull request with a patch, please apply it either
before the pull request or in the merge commit, in order to preserve
bisectability somewhat.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUkpg+AAoJEL/70l94x66DUmoH/jzXYkptSW9NGgm79KqxGJlD
lzLnLBkitVvx++Mz5YBhdJEhKKLUlCtifFT1zPJQ/pthQhIRSaaAwZyNGgUs5w5x
yMGKHiPQFyZRbmQtZhCInW0BftJoYHHciO3nUfHCZnp34My9MP2D55W7/z+fYFfQ
DuqBSE9ThyZJtZ4zh8NRA9fCOeuqwVYRyoBs820Wbsh4cpIBoIK63Dg7k+CLE+ZV
MZa/mRL6bAfsn9W5bnOUAgHJ3SPznnWbO3/g0aV+roL/5pffblprJx9lKNR08xUM
6hDFLop2gDehDJesDkY/o8Ckp1hEouvfsVpSShry4vcgtn0hgh2O5/6Orbmj6vE=
=Zwq1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM update from Paolo Bonzini:
"3.19 changes for KVM:
- spring cleaning: removed support for IA64, and for hardware-
assisted virtualization on the PPC970
- ARM, PPC, s390 all had only small fixes
For x86:
- small performance improvements (though only on weird guests)
- usual round of hardware-compliancy fixes from Nadav
- APICv fixes
- XSAVES support for hosts and guests. XSAVES hosts were broken
because the (non-KVM) XSAVES patches inadvertently changed the KVM
userspace ABI whenever XSAVES was enabled; hence, this part is
going to stable. Guest support is just a matter of exposing the
feature and CPUID leaves support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (179 commits)
KVM: move APIC types to arch/x86/
KVM: PPC: Book3S: Enable in-kernel XICS emulation by default
KVM: PPC: Book3S HV: Improve H_CONFER implementation
KVM: PPC: Book3S HV: Fix endianness of instruction obtained from HEIR register
KVM: PPC: Book3S HV: Remove code for PPC970 processors
KVM: PPC: Book3S HV: Tracepoints for KVM HV guest interactions
KVM: PPC: Book3S HV: Simplify locking around stolen time calculations
arch: powerpc: kvm: book3s_paired_singles.c: Remove unused function
arch: powerpc: kvm: book3s_pr.c: Remove unused function
arch: powerpc: kvm: book3s.c: Remove some unused functions
arch: powerpc: kvm: book3s_32_mmu.c: Remove unused function
KVM: PPC: Book3S HV: Check wait conditions before sleeping in kvmppc_vcore_blocked
KVM: PPC: Book3S HV: ptes are big endian
KVM: PPC: Book3S HV: Fix inaccuracies in ICP emulation for H_IPI
KVM: PPC: Book3S HV: Fix KSM memory corruption
KVM: PPC: Book3S HV: Fix an issue where guest is paused on receiving HMI
KVM: PPC: Book3S HV: Fix computation of tlbie operand
KVM: PPC: Book3S HV: Add missing HPTE unlock
KVM: PPC: BookE: Improve irq inject tracepoint
arm/arm64: KVM: Require in-kernel vgic for the arch timers
...
ACCESS_ONCE does not work reliably on non-scalar types. For
example gcc 4.6 and 4.7 might remove the volatile tag for such
accesses during the SRA (scalar replacement of aggregates) step
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145)
Commit 1365039d0c ("KVM: s390: Fix ipte locking") replace
ACCESS_ONCE with barriers. Lets use READ_ONCE instead.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Instead of returning a possibly random or'ed together value, let's
always return -EFAULT if rc is set.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently we use a mixture of atomic/non-atomic bitops
and the local_int spin lock to protect the pending_irqs bitmap
and interrupt payload data.
We need to use atomic bitops for the pending_irqs bitmap everywhere
and in addition acquire the local_int lock where interrupt data needs
to be protected.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The cpu address of a source cpu (responsible for an external irq) is only to
be stored if bit 6 of the ext irq code is set.
If bit 6 is not set, it is to be zeroed out.
The special external irq code used for virtio and pfault uses the cpu addr as a
parameter field. As bit 6 is set, this implementation is correct.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Allow to specify CR14, logout area, external damage code
and failed storage address.
Since more then one machine check can be indicated to the guest at
a time we need to combine all indication bits with already pending
requests.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adapts handling of local interrupts to be more compliant with
the z/Architecture Principles of Operation and introduces a data
structure
which allows more efficient handling of interrupts.
* get rid of li->active flag, use bitmap instead
* Keep interrupts in a bitmap instead of a list
* Deliver interrupts in the order of their priority as defined in the
PoP
* Use a second bitmap for sigp emergency requests, as a CPU can have
one request pending from every other CPU in the system.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt()
to smaller functions which handle one type of interrupt.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Get rid of open coded value for virtio and pfault completion interrupts.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The 32bit external interrupt parameter is only valid for timing-alert and
service-signal interrupts.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In preparation for the rework of the local interrupt injection code,
factor out injection routines from kvm_s390_inject_vcpu().
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When injecting a floating interrupt and no CPU is idle we
kick one CPU to do an external exit. In case of I/O we
should trigger an I/O exit instead. This does not matter
for Linux guests as external and I/O interrupts are
enabled/disabled at the same time, but play safe anyway.
The same holds true for machine checks. Since there is no
special exit, just reuse the generic stop exit. The injection
code inside the VCPU loop will recheck anyway and rearm the
proper exits (e.g. control registers) if necessary.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
A couple of our interception handlers rewind the PSW to the beginning
of the instruction to run the intercepted instruction again during the
next SIE entry. This normally works fine, but there is also the
possibility that the instruction did not get run directly but via an
EXECUTE instruction.
In this case, the PSW does not point to the instruction that caused the
interception, but to the EXECUTE instruction! So we've got to rewind the
PSW to the beginning of the EXECUTE instruction instead.
This is now accomplished with a new helper function kvm_s390_rewind_psw().
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch includes two small fixes for the PFMF handler: First, the
start address for PFMF has to be masked according to the current
addressing mode, which is now done with kvm_s390_logical_to_effective().
Second, the protection exceptions have a lower priority than the
specification exceptions, so the check for low-address protection
has to be moved after the last spot where we inject a specification
exception.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
1. We should flush TLBs for load control instruction emulation (stable)
2. A workaround for a compiler bug that renders ACCESS_ONCE broken (stable)
3. Fix program check handling for load control
4. Documentation Fix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=kFKq
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-20141107' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes for kvm/next (3.19) and stable
1. We should flush TLBs for load control instruction emulation (stable)
2. A workaround for a compiler bug that renders ACCESS_ONCE broken (stable)
3. Fix program check handling for load control
4. Documentation Fix
According to the architecture all instructions are suppressing if memory
access is prohibited due to DAT protection, unless stated otherwise for
an instruction.
The lctl[g]/stctl[g] implementations handled this incorrectly since
control register handling was done piecemeal, which means they had
terminating instead of suppressing semantics.
This patch fixes this.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
some control register changes will flush some aspects of the CPU, e.g.
POP explicitely mentions that for CR9-CR11 "TLBs may be cleared".
Instead of trying to be clever and only flush on specific CRs, let
play safe and flush on all lctl(g) as future machines might define
new bits in CRs. Load control intercept should not happen that often.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
ipte_unlock_siif uses cmpxchg to replace the in-memory data of the ipte
lock together with ACCESS_ONCE for the intial read.
union ipte_control {
unsigned long val;
struct {
unsigned long k : 1;
unsigned long kh : 31;
unsigned long kg : 32;
};
};
[...]
static void ipte_unlock_siif(struct kvm_vcpu *vcpu)
{
union ipte_control old, new, *ic;
ic = &vcpu->kvm->arch.sca->ipte_control;
do {
new = old = ACCESS_ONCE(*ic);
new.kh--;
if (!new.kh)
new.k = 0;
} while (cmpxchg(&ic->val, old.val, new.val) != old.val);
if (!new.kh)
wake_up(&vcpu->kvm->arch.ipte_wq);
}
The new value, is loaded twice from memory with gcc 4.7.2 of
fedora 18, despite the ACCESS_ONCE:
--->
l %r4,0(%r3) <--- load first 32 bit of lock (k and kh) in r4
alfi %r4,2147483647 <--- add -1 to r4
llgtr %r4,%r4 <--- zero out the sign bit of r4
lg %r1,0(%r3) <--- load all 64 bit of lock into new
lgr %r2,%r1 <--- load the same into old
risbg %r1,%r4,1,31,32 <--- shift and insert r4 into the bits 1-31 of
new
llihf %r4,2147483647
ngrk %r4,%r1,%r4
jne aa0 <ipte_unlock+0xf8>
nihh %r1,32767
lgr %r4,%r2
csg %r4,%r1,0(%r3)
cgr %r2,%r4
jne a70 <ipte_unlock+0xc8>
If the memory value changes between the first load (l) and the second
load (lg) we are broken. If that happens VCPU threads will hang
(unkillable) in handle_ipte_interlock.
Andreas Krebbel analyzed this and tracked it down to a compiler bug in
that version:
"while it is not that obvious the C99 standard basically forbids
duplicating the memory access also in that case. For an argumentation of
a similiar case please see:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=22278#c43
For the implementation-defined cases regarding volatile there are some
GCC-specific clarifications which can be found here:
https://gcc.gnu.org/onlinedocs/gcc/Volatiles.html#Volatiles
I've tracked down the problem with a reduced testcase. The problem was
that during a tree level optimization (SRA - scalar replacement of
aggregates) the volatile marker is lost. And an RTL level optimizer (CSE
- common subexpression elimination) then propagated the memory read into
its second use introducing another access to the memory location. So
indeed Christian's suspicion that the union access has something to do
with it is correct (since it triggered the SRA optimization).
This issue has been reported and fixed in the GCC 4.8 development cycle:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145"
This patch replaces the ACCESS_ONCE scheme with a barrier() based scheme
that should work for all supported compilers.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # v3.16+
In preparation for further code changes (e.g. getting rid of action_flags),
this patch splits the handling of the two sigp orders SIGP STOP and SIGP STOP
AND STORE STATUS by introducing a separate handler function for SIGP STOP AND
STORE STATUS.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In preparation for further code changes, this patch moves the injection of
emergency calls into a separate function and uses it for the processing of
SIGP EMERGENCY CALL and SIGP CONDITIONAL EMERGENCY CALL.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch introduces instruction counters for all known sigp orders and also a
separate one for unknown orders that are passed to user space.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch introduces in preparation for further code changes separate handler
functions for:
- SIGP (RE)START - will not be allowed to terminate pending orders
- SIGP (INITIAL) CPU RESET - will be allowed to terminate certain pending orders
- unknown sigp orders
All sigp orders that require user space intervention are logged.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
All sigp orders targeting one VCPU have to verify that the target is valid and
available.
Let's move the check from the single functions to the dispatcher. The
destination VCPU is directly passed as a pointer - instead of the cpu address of
the target.
Please note that all SIGP orders except SIGP SET ARCHITECTURE - even unknown
ones - will now check for the availability of the target VCPU. This is what the
architecture documentation specifies.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
All sigp orders except SIGP SET ARCHITECTURE target exactly one vcpu.
Let's move the dispatch code for these orders into a separate function to
prepare for cleaner target availability checks.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The monitor-class number field is only 16 bits, so we have to use
a u16 pointer to access it.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
CC: stable@vger.kernel.org # v3.16+
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The ipte-locking should be done for each VM seperately, not globally.
This way we avoid possible congestions when the simple ipte-lock is used
and multiple VMs are running.
Suggested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When storage keys are enabled unmerge already merged pages and prevent
new pages from being merged.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replace the s390 specific page table walker for the pgste updates
with a call to the common code walk_page_range function.
There are now two pte modification functions, one for the reset
of the CMMA state and another one for the initialization of the
storage keys.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch introduces the halt_wakeup counter used by common code and uses it to
count vcpu wakeups done in s390 arch specific code.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
There is nothing to do for KVM to support TOD-CLOCK steering.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Using the new kvm_register_device_ops() interface makes us get rid of
an #ifdef in common code.
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The old handling of prefix pages was broken in the diag10 ballooner.
We now rely on gmap_discard to check for start > end and do a
slow path if the prefix swap pages are affected:
1. discard the pages from start to prefix
2. discard the absolute 0 pages
3. discard the pages after prefix swap to end
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Due to the earlier check we know that ipte_lock_count must be 0.
No need to add a useless if. Let's make clear that we are going
to always wakeup when we execute that code.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
We must not fallthrough if the conditions for external call are not met.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Currently we fill up a full 5 level page table to hold the guest
mapping. Since commit "support gmap page tables with less than 5
levels" we can do better.
Having more than 4 TB might be useful for some testing scenarios,
so let's just limit ourselves to 16TB guest size.
Having more than that is totally untested as I do not have enough
swap space/memory.
We continue to allow ucontrol the full size.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
We now propagate interrupt injection errors back to the ioctl. We
should mark functions that might fail with __must_check.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
We have to provide a per guest crypto block for the CPUs to
enable MSA4 instructions. According to icainfo on z196 or
later this enables CCM-AES-128, CMAC-AES-128, CMAC-AES-192
and CMAC-AES-256.
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split MSA4/protected key into two patches]
In the beggining was on_each_cpu(), which required an unused argument to
kvm_arch_ops.hardware_{en,dis}able, but this was soon forgotten.
Remove unnecessary arguments that stem from this.
Signed-off-by: Radim KrÄmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
