Commit Graph

121 Commits

Author SHA1 Message Date
Joel Becker
99b1bb61b2 Merge branch 'mw-3.1-jul25' of git://oss.oracle.com/git/smushran/linux-2.6 into ocfs2-fixes 2011-08-21 21:02:57 -07:00
Jan Kara
c7e25e6e0b ocfs2: Avoid livelock in ocfs2_readpage()
When someone writes to an inode, readers accessing the same inode via
ocfs2_readpage() just busyloop trying to get ip_alloc_sem because
do_generic_file_read() looks up the page again and retries ->readpage()
when previous attempt failed with AOP_TRUNCATED_PAGE. When there are enough
readers, they can occupy all CPUs and in non-preempt kernel the system is
deadlocked because writer holding ip_alloc_sem is never run to release the
semaphore. Fix the problem by making reader block on ip_alloc_sem to break
the busy loop.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-07-28 02:07:19 -07:00
Mark Fasheh
a11f7e63c5 ocfs2: serialize unaligned aio
Fix a corruption that can happen when we have (two or more) outstanding
aio's to an overlapping unaligned region.  Ext4
(e9e3bcecf4) and xfs recently had to fix
similar issues.

In our case what happens is that we can have an outstanding aio on a region
and if a write comes in with some bytes overlapping the original aio we may
decide to read that region into a page before continuing (typically because
of buffered-io fallback).  Since we have no ordering guarantees with the
aio, we can read stale or bad data into the page and then write it back out.

If the i/o is page and block aligned, then we avoid this issue as there
won't be any need to read data from disk.

I took the same approach as Eric in the ext4 patch and introduced some
serialization of unaligned async direct i/o.  I don't expect this to have an
effect on the most common cases of AIO.  Unaligned aio will be slower
though, but that's far more acceptable than data corruption.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-07-28 02:07:16 -07:00
Wengang Wang
5cffff9e29 ocfs2: Fix ocfs2_page_mkwrite()
This patch address two shortcomings in ocfs2_page_mkwrite():
1. Makes the function return better VM_FAULT_* errors.
2. It handles a error that is triggered when a page is dropped from the mapping
due to memory pressure. This patch locks the page to prevent that.

[Patch was cleaned up by Sunil Mushran.]

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
2011-07-24 10:36:54 -07:00
Christoph Hellwig
72c5052ddc fs: move inode_dio_done to the end_io handler
For filesystems that delay their end_io processing we should keep our
i_dio_count until the the processing is done.  Enable this by moving
the inode_dio_done call to the end_io handler if one exist.  Note that
the actual move to the workqueue for ext4 and XFS is not done in
this patch yet, but left to the filesystem maintainers.  At least
for XFS it's not needed yet either as XFS has an internal equivalent
to i_dio_count.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:50 -04:00
Christoph Hellwig
df2d6f2658 fs: always maintain i_dio_count
Maintain i_dio_count for all filesystems, not just those using DIO_LOCKING.
This these filesystems to also protect truncate against direct I/O requests
by using common code.  Right now the only non-DIO_LOCKING filesystem that
appears to do so is XFS, which uses an opencoded variant of the i_dio_count
scheme.

Behaviour doesn't change for filesystems never calling inode_dio_wait.
For ext4 behaviour changes when using the dioread_nonlock option, which
previously was missing any protection between truncate and direct I/O reads.
For ocfs2 that handcrafted i_dio_count manipulations are replaced with
the common code now enable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:48 -04:00
Christoph Hellwig
bd5fe6c5eb fs: kill i_alloc_sem
i_alloc_sem is a rather special rw_semaphore.  It's the last one that may
be released by a non-owner, and it's write side is always mirrored by
real exclusion.  It's intended use it to wait for all pending direct I/O
requests to finish before starting a truncate.

Replace it with a hand-grown construct:

 - exclusion for truncates is already guaranteed by i_mutex, so it can
   simply fall way
 - the reader side is replaced by an i_dio_count member in struct inode
   that counts the number of pending direct I/O requests.  Truncate can't
   proceed as long as it's non-zero
 - when i_dio_count reaches non-zero we wake up a pending truncate using
   wake_up_bit on a new bit in i_flags
 - new references to i_dio_count can't appear while we are waiting for
   it to read zero because the direct I/O count always needs i_mutex
   (or an equivalent like XFS's i_iolock) for starting a new operation.

This scheme is much simpler, and saves the space of a spinlock_t and a
struct list_head in struct inode (typically 160 bits on a non-debug 64-bit
system).

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:46 -04:00
Linus Torvalds
03e4970c10 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (39 commits)
  Treat writes as new when holes span across page boundaries
  fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS.
  ocfs2/dlm: Move kmalloc() outside the spinlock
  ocfs2: Make the left masklogs compat.
  ocfs2: Remove masklog ML_AIO.
  ocfs2: Remove masklog ML_UPTODATE.
  ocfs2: Remove masklog ML_BH_IO.
  ocfs2: Remove masklog ML_JOURNAL.
  ocfs2: Remove masklog ML_EXPORT.
  ocfs2: Remove masklog ML_DCACHE.
  ocfs2: Remove masklog ML_NAMEI.
  ocfs2: Remove mlog(0) from fs/ocfs2/dir.c
  ocfs2: remove NAMEI from symlink.c
  ocfs2: Remove masklog ML_QUOTA.
  ocfs2: Remove mlog(0) from quota_local.c.
  ocfs2: Remove masklog ML_RESERVATIONS.
  ocfs2: Remove masklog ML_XATTR.
  ocfs2: Remove masklog ML_SUPER.
  ocfs2: Remove mlog(0) from fs/ocfs2/heartbeat.c
  ocfs2: Remove mlog(0) from fs/ocfs2/slot_map.c
  ...

Fix up trivial conflict in fs/ocfs2/super.c
2011-03-28 13:03:31 -07:00
Goldwyn Rodrigues
272b62c1f0 Treat writes as new when holes span across page boundaries
When a hole spans across page boundaries, the next write forces
a read of the block. This could end up reading existing garbage
data from the disk in ocfs2_map_page_blocks. This leads to
non-zero holes. In order to avoid this, mark the writes as new
when the holes span across page boundaries.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: jlbec <jlbec@evilplan.org>
2011-03-28 09:44:58 -07:00
Jens Axboe
7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Tao Ma
9558156bcf ocfs2: Remove mlog(0) from fs/ocfs2/aops.c
Remove all the "mlog(0," in fs/ocfs2/aops.c.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-22 21:33:59 +08:00
Tao Ma
c1e8d35ef5 ocfs2: Remove EXIT from masklog.
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
   Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
   mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
Tao Ma
ef6b689b63 ocfs2: Remove ENTRY from masklog.
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-21 11:10:44 +08:00
Linus Torvalds
498f7f505d Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits)
  MAINTAINERS: Update Joel Becker's email address
  ocfs2: Remove unused truncate function from alloc.c
  ocfs2/cluster: dereferencing before checking in nst_seq_show()
  ocfs2: fix build for OCFS2_FS_STATS not enabled
  ocfs2/cluster: Show o2net timing statistics
  ocfs2/cluster: Track process message timing stats for each socket
  ocfs2/cluster: Track send message timing stats for each socket
  ocfs2/cluster: Use ktime instead of timeval in struct o2net_sock_container
  ocfs2/cluster: Replace timeval with ktime in struct o2net_send_tracking
  ocfs2: Add DEBUG_FS dependency
  ocfs2/dlm: Hard code the values for enums
  ocfs2/dlm: Minor cleanup
  ocfs2/dlm: Cleanup dlmdebug.c
  ocfs2: Release buffer_head in case of error in ocfs2_double_lock.
  ocfs2/cluster: Pin the local node when o2hb thread starts
  ocfs2/cluster: Show pin state for each o2hb region
  ocfs2/cluster: Pin/unpin o2hb regions
  ocfs2/cluster: Remove dropped region from o2hb quorum region bitmap
  ocfs2/cluster: Pin the remote node item in configfs
  ocfs2/dlm: make existing convertion precedent over new lock
  ...
2011-01-11 11:28:34 -08:00
Tao Ma
50308d813b ocfs2: Try to free truncate log when meeting ENOSPC in write.
Recently, one of our colleagues meet with a problem that if we
write/delete a 32mb files repeatly, we will get an ENOSPC in
the end. And the corresponding bug is 1288.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1288

The real problem is that although we have freed the clusters,
they are in truncate log and they will be summed up so that
we can free them once in a whole.

So this patch just try to resolve it. In case we see -ENOSPC
in ocfs2_write_begin_no_lock, we will check whether the truncate
log has enough clusters for our need, if yes, we will try to
flush the truncate log at that point and try again. This method
is inspired by Mark Fasheh <mfasheh@suse.com>. Thanks.

Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-12-16 00:46:02 -08:00
Tristan Ye
39c99f12f1 Ocfs2: Teach 'coherency=full' O_DIRECT writes to correctly up_read i_alloc_sem.
Due to newly-introduced 'coherency=full' O_DIRECT writes also takes the EX
rw_lock like buffered writes did(rw_level == 1), it turns out messing the
usage of 'level' in ocfs2_dio_end_io() up, which caused i_alloc_sem being
failed to get up_read'd correctly.

This patch tries to teach ocfs2_dio_end_io to understand well on all locking
stuffs by explicitly introducing a new bit for i_alloc_sem in iocb's private
data, just like what we did for rw_lock.

Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-12-09 15:36:48 -08:00
Christoph Hellwig
ebdec241d5 fs: kill block_prepare_write
__block_write_begin and block_prepare_write are identical except for slightly
different calling conventions.  Convert all callers to the __block_write_begin
calling conventions and drop block_prepare_write.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:18:20 -04:00
Joel Becker
729963a1ff Merge branch 'cow_readahead' of git://oss.oracle.com/git/tma/linux-2.6 into merge-2 2010-09-10 08:41:04 -07:00
Goldwyn Rodrigues
83fd9c7f65 Reorganize data elements to reduce struct sizes
Thanks for the comments. I have incorportated them all.

CONFIG_OCFS2_FS_STATS is enabled and CONFIG_DEBUG_LOCK_ALLOC is disabled.
Statistics now look like -
ocfs2_write_ctxt: 2144 - 2136 = 8
ocfs2_inode_info: 1960 - 1848 = 112
ocfs2_journal: 168 - 160 = 8
ocfs2_lock_res: 336 - 304 = 32
ocfs2_refcount_tree: 512 - 472 = 40

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-10 08:39:27 -07:00
Tao Ma
155027121f ocfs2: Add struct file to ocfs2_refcount_cow.
Add a new parameter 'struct file *' to ocfs2_refcount_cow
so that we can add readahead support later.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-08-12 10:39:57 +08:00
Tao Ma
0378da0fda ocfs2: pass struct file* to ocfs2_write_begin_nolock.
struct file * has file_ra_state to store the readahead state
and data. So pass this to ocfs2_write_begin_nolock so that
it can be used in ocfs2_refcount_cow.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-08-12 10:39:48 +08:00
Christoph Hellwig
eafdc7d190 sort out blockdev_direct_IO variants
Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence.  This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway.  Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:29 -04:00
Christoph Hellwig
40e2e97316 direct-io: move aio_complete into ->end_io
Filesystems with unwritten extent support must not complete an AIO request
until the transaction to convert the extent has been commited.  That means
the aio_complete calls needs to be moved into the ->end_io callback so
that the filesystem can control when to call it exactly.

This makes a bit of a mess out of dio_complete and the ->end_io callback
prototype even more complicated.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-26 16:09:02 -05:00
Joel Becker
693c241a5f ocfs2: No need to zero pages past i_size.
When ocfs2 fills a hole, it does so by allocating clusters.  When a
cluster is larger than the write, ocfs2 must zero the portions of the
cluster outside of the write.  If the clustersize is smaller than a
pagecache page, this is handled by the normal pagecache mechanisms, but
when the clustersize is larger than a page, ocfs2's write code will zero
the pages adjacent to the write.  This makes sure the entire cluster is
zeroed correctly.

Currently ocfs2 behaves exactly the same when writing past i_size.
However, this means ocfs2 is writing zeroed pages for portions of a new
cluster that are beyond i_size.  The page writeback code isn't expecting
this.  It treats all pages past the one containing i_size as left behind
due to a previous truncate operation.

Thankfully, ocfs2 calculates the number of pages it will be working on
up front.  The rest of the write code merely honors the original
calculation.  We can simply trim the number of pages to only cover the
actual file data.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
2010-07-12 13:55:27 -07:00
Joel Becker
5693486bad ocfs2: Zero the tail cluster when extending past i_size.
ocfs2's allocation unit is the cluster.  This can be larger than a block
or even a memory page.  This means that a file may have many blocks in
its last extent that are beyond the block containing i_size.  There also
may be more unwritten extents after that.

When ocfs2 grows a file, it zeros the entire cluster in order to ensure
future i_size growth will see cleared blocks.  Unfortunately,
block_write_full_page() drops the pages past i_size.  This means that
ocfs2 is actually leaking garbage data into the tail end of that last
cluster.  This is a bug.

We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect
when a write or truncate is past i_size.  They will use
ocfs2_zero_extend() to ensure the data is properly zeroed.

Older versions of ocfs2_zero_extend() simply zeroed every block between
i_size and the zeroing position.  This presumes three things:

1) There is allocation for all of these blocks.
2) The extents are not unwritten.
3) The extents are not refcounted.

(1) and (2) hold true for non-sparse filesystems, which used to be the
only users of ocfs2_zero_extend().  (3) is another bug.

Since we're now using ocfs2_zero_extend() for sparse filesystems as
well, we teach ocfs2_zero_extend() to check every extent between
i_size and the zeroing position.  If the extent is unwritten, it is
ignored.  If it is refcounted, it is CoWed.  Then it is zeroed.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
2010-07-08 13:25:35 -07:00
Joel Becker
a4bfb4cf11 ocfs2: When zero extending, do it by page.
ocfs2_zero_extend() does its zeroing block by block, but it calls a
function named ocfs2_write_zero_page().  Let's have
ocfs2_write_zero_page() handle the page level.  From
ocfs2_zero_extend()'s perspective, it is now page-at-a-time.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
2010-07-08 13:24:49 -07:00
Mark Fasheh
4fe370afaa ocfs2: use allocation reservations during file write
Add a per-inode reservations structure and pass it through to the
reservations code.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2010-05-05 18:17:30 -07:00
Linus Torvalds
e213e26ab3 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
  quota: stop using QUOTA_OK / NO_QUOTA
  dquot: cleanup dquot initialize routine
  dquot: move dquot initialization responsibility into the filesystem
  dquot: cleanup dquot drop routine
  dquot: move dquot drop responsibility into the filesystem
  dquot: cleanup dquot transfer routine
  dquot: move dquot transfer responsibility into the filesystem
  dquot: cleanup inode allocation / freeing routines
  dquot: cleanup space allocation / freeing routines
  ext3: add writepage sanity checks
  ext3: Truncate allocated blocks if direct IO write fails to update i_size
  quota: Properly invalidate caches even for filesystems with blocksize < pagesize
  quota: generalize quota transfer interface
  quota: sb_quota state flags cleanup
  jbd: Delay discarding buffers in journal_unmap_buffer
  ext3: quota_write cross block boundary behaviour
  quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
  quota: split out compat_sys_quotactl support from quota.c
  quota: split out netlink notification support from quota.c
  quota: remove invalid optimization from quota_sync_all
  ...

Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
2010-03-05 13:20:53 -08:00
Christoph Hellwig
5dd4056db8 dquot: cleanup space allocation / freeing routines
Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.

Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not.  Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:28 +01:00
Tao Ma
cbaee472f2 ocfs2: Only bug out in direct io write for reflinked extent.
In ocfs2_direct_IO_get_blocks, we only need to bug out
in case of we are going to write a recounted extent rec.

What a silly bug introduced by me!

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
2010-02-26 15:41:19 -08:00
Sunil Mushran
2bd632165c ocfs2/trivial: Remove trailing whitespaces
Patch removes trailing whitespaces.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-01-25 19:20:51 -08:00
Christoph Hellwig
5fe878ae7f direct-io: cleanup blockdev_direct_IO locking
Currently the locking in blockdev_direct_IO is a mess, we have three
different locking types and very confusing checks for some of them.  The
most complicated one is DIO_OWN_LOCKING for reads, which happens to not
actually be used.

This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read
case is unused anyway, and the write side is almost identical to
DIO_NO_LOCKING.  The difference is that DIO_NO_LOCKING always sets the
create argument for the get_blocks callback to zero, but we can easily
move that to the actual get_blocks callbacks.  There are four users of the
DIO_NO_LOCKING mode: gfs already ignores the create argument and thus is
fine with the new version, ocfs2 only errors out if create were ever set,
and we can remove this dead code now, the block device code only ever uses
create for an error message if we are fully beyond the device which can
never happen, and last but not least XFS will need the new behavour for
writes.

Now we can replace the lock_type variable with a flags one, where no flag
means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first
flag.  Separate out the check for not allowing to fill holes into a
separate flag, although for now both flags always get set at the same
time.

Also revamp the documentation of the locking scheme to actually make
sense.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Elder <aelder@sgi.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:13 -08:00
Linus Torvalds
db16826367 Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
  HWPOISON: Enable error_remove_page on btrfs
  HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
  HWPOISON: Add madvise() based injector for hardware poisoned pages v4
  HWPOISON: Enable error_remove_page for NFS
  HWPOISON: Enable .remove_error_page for migration aware file systems
  HWPOISON: The high level memory error handler in the VM v7
  HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
  HWPOISON: shmem: call set_page_dirty() with locked page
  HWPOISON: Define a new error_remove_page address space op for async truncation
  HWPOISON: Add invalidate_inode_page
  HWPOISON: Refactor truncate to allow direct truncating of page v2
  HWPOISON: check and isolate corrupted free pages v2
  HWPOISON: Handle hardware poisoned pages in try_to_unmap
  HWPOISON: Use bitmask/action code for try_to_unmap behaviour
  HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
  HWPOISON: Add poison check to page fault handling
  HWPOISON: Add basic support for poisoned pages in fault handler v3
  HWPOISON: Add new SIGBUS error codes for hardware poison signals
  HWPOISON: Add support for poison swap entries v2
  HWPOISON: Export some rmap vma locking to outside world
  ...
2009-09-24 07:53:22 -07:00
Tao Ma
b80474b432 ocfs2: Use buffer IO if we are appending a file.
In ocfs2_file_aio_write, we will prevent direct io if
we find that we are appending(changing i_size) and call
generic_file_aio_write_nolock. But actually O_DIRECT flag
is there and this function will call generic_file_direct_write
eventually which will update i_size and leave di->i_size
alone. The bug is
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1173.

So this patch let ocfs2_direct_IO returns 0 directly if we
are appending so that buffered write will be called and
di->i_size get updated successfully. And this is also
what we want in ocfs2_file_aio_write.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-23 01:54:49 -07:00
Tao Ma
37f8a2bfaa ocfs2: CoW a reflinked cluster when it is truncated.
When we truncate a file to a specific size which resides in a reflinked
cluster, we need to CoW it since ocfs2_zero_range_for_truncate will
zero the space after the size(just another type of write).

So we add a "max_cpos" in ocfs2_refcount_cow so that it will stop when
it hit the max cluster offset.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:38 -07:00
Tao Ma
293b2f70b4 ocfs2: Integrate CoW in file write.
When we use mmap, we CoW the refcountd clusters in
ocfs2_write_begin_nolock. While for normal file
io(including directio), we do CoW in
ocfs2_prepare_inode_for_write.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:37 -07:00
Tao Ma
6f70fa5199 ocfs2: Add CoW support.
This patch try CoW support for a refcounted record.

the whole process will be:
1. Calculate how many clusters we need to CoW and where we start.
   Extents that are not completely encompassed by the write will
   be broken on 1MB boundaries.
2. Do CoW for the clusters with the help of page cache.
3. Change the b-tree structure with the new allocated clusters.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:36 -07:00
Andi Kleen
aa261f549d HWPOISON: Enable .remove_error_page for migration aware file systems
Enable removing of corrupted pages through truncation
for a bunch of file systems: ext*, xfs, gfs2, ocfs2, ntfs
These should cover most server needs.

I chose the set of migration aware file systems for this
for now, assuming they have been especially audited.
But in general it should be safe for all file systems
on the data area that support read/write and truncate.

Caveat: the hardware error handler does not take i_mutex
for now before calling the truncate function. Is that ok?

Cc: tytso@mit.edu
Cc: hch@infradead.org
Cc: mfasheh@suse.com
Cc: aia21@cantab.net
Cc: hugh.dickins@tiscali.co.uk
Cc: swhiteho@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-09-16 11:50:16 +02:00
Joel Becker
5e404e9ed1 ocfs2: Pass ocfs2_caching_info into ocfs_init_*_extent_tree().
With this commit, extent tree operations are divorced from inodes and
rely on ocfs2_caching_info.  Phew!

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04 16:08:13 -07:00
Joel Becker
0cf2f7632b ocfs2: Pass struct ocfs2_caching_info to the journal functions.
The next step in divorcing metadata I/O management from struct inode is
to pass struct ocfs2_caching_info to the journal functions.  Thus the
journal locks a metadata cache with the cache io_lock function.  It also
can compare ci_last_trans and ci_created_trans directly.

This is a large patch because of all the places we change
ocfs2_journal_access..(handle, inode, ...) to
ocfs2_journal_access..(handle, INODE_CACHE(inode), ...).

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04 16:07:50 -07:00
Sunil Mushran
8379e7c46c ocfs2: ocfs2_write_begin_nolock() should handle len=0
Bug introduced by mainline commit e7432675f8
The bug causes ocfs2_write_begin_nolock() to oops when len=0.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04 14:28:31 -07:00
Sunil Mushran
e7432675f8 ocfs2: Initialize the cluster we're writing to in a non-sparse extend
In a non-sparse extend, we correctly allocate (and zero) the clusters between
the old_i_size and pos, but we don't zero the portions of the cluster we're
writing to outside of pos<->len.

It handles clustersize > pagesize and blocksize < pagesize.

[Cleaned up by Joel Becker.]

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-08-07 13:16:23 -07:00
Wengang Wang
1f4cea3790 ocfs2: Fail ocfs2_get_block() immediately when a block needs allocation
ocfs2_get_block() does no allocation.  Hole filling for writes should
have happened farther up in the call chain.  We detect this case and
print an error, but we then continue with the function.  We should be
exiting immediately.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-07-20 17:36:07 -07:00
Wengang Wang
cbfa9639ae ocfs2: Fix error return in ocfs2_write_cluster()
A typo caused ocfs2_write_cluster() to return 0 in some error cases.
Fix it.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-07-20 17:32:55 -07:00
Hisashi Hifumi
1fca3a05ef ocfs2: Pagecache usage optimization on ocfs2
A page can have multiple buffers and even if a page is not uptodate, some buffers
can be uptodate on pagesize != blocksize environment.
This aops checks that all buffers which correspond to a part of a file
that we want to read are uptodate. If so, we do not have to issue actual
read IO to HDD even if a page is not uptodate because the portion we
want to read are uptodate.
"block_is_partially_uptodate" function is already used by ext2/3/4.
With the following patch random read/write mixed workloads or random read after
random write workloads can be optimized and we can get performance improvement.

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:26 -07:00
Tiger Yang
d9ae49d6e2 ocfs2: tweak to get the maximum inline data size with xattr
Replace max_inline_data with max_inline_data_with_xattr
to ensure it correct when xattr inlined.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-12 16:45:46 -07:00
Joel Becker
13723d00e3 ocfs2: Use metadata-specific ocfs2_journal_access_*() functions.
The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2
commit triggers and allow us to compute metadata ecc right before the
buffers are written out.  This commit provides ecc for inodes, extent
blocks, group descriptors, and quota blocks.  It is not safe to use
extened attributes and metaecc at the same time yet.

The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide
the type of block at their root.  Before, it didn't matter, but now the
root block must use the appropriate ocfs2_journal_access_*() function.
To keep this abstract, the structures now have a pointer to the matching
journal_access function and a wrapper call to call it.

A few places use naked ocfs2_write_block() calls instead of adding the
blocks to the journal.  We make sure to calculate their checksum and ecc
before the write.

Since we pass around the journal_access functions.  Let's typedef them
in ocfs2.h.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:32 -08:00
Jan Kara
a90714c150 ocfs2: Add quota calls for allocation and freeing of inodes and space
Add quota calls for allocation and freeing of inodes and space, also update
estimates on number of needed credits for a transaction. Move out inode
allocation from ocfs2_mknod_locked() because vfs_dq_init() must be called
outside of a transaction.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:23 -08:00
Mark Fasheh
53ef99cad9 ocfs2: Remove JBD compatibility layer
JBD2 is fully backwards compatible with JBD and it's been tested enough with
Ocfs2 that we can clean this code up now.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:55 -08:00
Joel Becker
b657c95c11 ocfs2: Wrap inode block reads in a dedicated function.
The ocfs2 code currently reads inodes off disk with a simple
ocfs2_read_block() call.  Each place that does this has a different set
of sanity checks it performs.  Some check only the signature.  A couple
validate the block number (the block read vs di->i_blkno).  A couple
others check for VALID_FL.  Only one place validates i_fs_generation.  A
couple check nothing.  Even when an error is found, they don't all do
the same thing.

We wrap inode reading into ocfs2_read_inode_block().  This will validate
all the above fields, going readonly if they are invalid (they never
should be).  ocfs2_read_inode_block_full() is provided for the places
that want to pass read_block flags.  Every caller is passing a struct
inode with a valid ip_blkno, so we don't need a separate blkno argument
either.

We will remove the validation checks from the rest of the code in a
later commit, as they are no longer necessary.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:52 -08:00