Various drivers count and iterate over OF children nodes via
of_get_child_count and for_each_child_of_node. Instead they should use
of_get_available_child_count and for_each_available_child_of_node, so
that if a given node has the `status` property set to `disabled`, the
child will be ignored.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andrey Utkin <andrey_utkin@fastmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christian Mauderer <oss@c-mauderer.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: David Rivshin <drivshin@allworx.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Milo Kim <milo.kim@ti.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Nikita Travkin <nikitos.tr@gmail.com>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Philippe Retornaz <philippe.retornaz@epfl.ch>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Simon Shields <simon@lineageos.org>
Cc: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Cc: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The devm_led_classdev_register_ext is given init_data with fwnode set,
so the LED core sets .of_node of the new LED classdev correctly.
Do not rewrite this value to parent of_node.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The dev_of_node function should be preferred.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Simply use device_get_match_data instead of matching against the match
table again.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: David Rivshin <drivshin@allworx.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Christian Mauderer <oss@c-mauderer.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
This driver can be compiled on other platforms with small change if
COMPILE_TEST=y.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
These drivers can be compiled without modification when COMPILE_TEST=y:
cobalt-qube, cobalt-raq, netxbig, ns2 and s3c24xx
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
If LEDs are configured through device tree and the property 'label' is
omitted, the label is supposed to be generated from the properties
'function' and 'color' if present. While this works fine for e.g. the
'leds-gpio' driver, it did not for 'leds-pwm'.
The reason is, you get this label naming magic only if you add a LED
device through 'devm_led_classdev_register_ext()' and pass a pointer to
the current device tree node.
For the following node from dts the LED appeared as 'led-5' in sysfs
before and as 'red:debug' after this change.
pwm_leds {
compatible = "pwm-leds";
led-5 {
function = LED_FUNCTION_DEBUG;
color = <LED_COLOR_ID_RED>;
pwms = <&pwm0 2 10000000 0>;
max-brightness = <127>;
linux,default-trigger = "heartbeat";
panic-indicator;
};
};
Signed-off-by: Alexander Dahl <post@lespocky.de>
Cc: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
generate a 5ms low pulse on shutdown pin when startup, then the chip
becomes more stable in the complex EM environment.
Signed-off-by: Grant Feng <von81@163.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Introduce the LP5036/30/24/18/12/9 RGB LED driver.
The difference in these parts are the number of
LED outputs where the:
LP5036 can control 36 LEDs
LP5030 can control 30 LEDs
LP5024 can control 24 LEDs
LP5018 can control 18 LEDs
LP5012 can control 12 LEDs
LP5009 can control 9 LEDs
The device has the ability to group LED outputs into control banks
so that multiple LED banks can be controlled with the same mixing and
brightness. Or the LED outputs can also be controlled independently.
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
With these kernel configs:
CONFIG_LEDS_CLASS=m
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5562=m
leds-lp55xx-common.c has a build error because it is builtin and
calls an interface that is built as a loadable module (due to
LEDS_CLASS=m). By making LEDS_LP55XX_COMMON depend on LEDS_CLASS,
this config combination cannot happen, thus preventing the build error.
ld: drivers/leds/leds-lp55xx-common.o: in function `lp55xx_register_leds':
leds-lp55xx-common.c:(.text+0xc5f): undefined reference to `devm_led_classdev_register_ext'
Fixes: 33b3a561f4 ("leds: support new LP8501 device - another LP55xx common")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Milo Kim <milo.kim@ti.com>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Pavel Machek <pavel@ucw.cz>
IBM created an implementation of the PCA9552 on a PIC16F
microcontroller. The I2C device addresses are different from the
hardware PCA9552, so add a new compatible string and associated
platform data to be able to probe this device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
clang static analysis reports this problem
leds-mt6323.c:275:12: warning: Division by zero
duty_hw = MT6323_CAL_HW_DUTY(*delay_on, period);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is because period can be 0.
period = *delay_on + *delay_off;
There is a later check that *delay_on/off are valid.
if (!*delay_on && !*delay_off) {
*delay_on = 500;
*delay_off = 500;
}
Setting the delay_on/off means period needs to be recalculated
anyway. So move the period statements after this check.
Fixes: 216ec6cc4c ("leds: Add LED support for MT6323 PMIC")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The driver includes machine header for GPIO registers but actually does
not use them.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Okay, so... this one is interesting. RGB LEDs are very common, and we
need to have some kind of support for them. Multicolor is for
arbitrary set of LEDs in one package, RGB is for LEDs that can produce
full range of colors. We do not have real multicolor LED that is not
RGB in the pipeline, so that one is disabled for now.
You can expect this saga to continue with next pull requests.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCXyskqQAKCRAw5/Bqldv6
8ge0AJ9JRTa/0Xkl7JuKUpC93jAnvjpK+ACgsDijb77H5zmtwC8xa0kXiDsbh3E=
=aSJX
-----END PGP SIGNATURE-----
Merge tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Okay, so... this one is interesting. RGB LEDs are very common, and we
need to have some kind of support for them. Multicolor is for
arbitrary set of LEDs in one package, RGB is for LEDs that can produce
full range of colors. We do not have real multicolor LED that is not
RGB in the pipeline, so that one is disabled for now.
You can expect this saga to continue with next pull requests"
* tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits)
MAINTAINERS: Remove myself as LED subsystem maintainer
leds: disallow /sys/class/leds/*:multi:* for now
leds: add RGB color option, as that is different from multicolor.
Make LEDS_LP55XX_COMMON depend on I2C to fix build errors:
Documentation: ABI: leds-turris-omnia: document sysfs attribute
leds: initial support for Turris Omnia LEDs
dt-bindings: leds: add cznic,turris-omnia-leds binding
leds: pattern trigger -- check pattern for validity
leds: Replace HTTP links with HTTPS ones
leds: trigger: add support for LED-private device triggers
leds: lp5521: Add multicolor framework multicolor brightness support
leds: lp5523: Update the lp5523 code to add multicolor brightness function
leds: lp55xx: Add multicolor framework support to lp55xx
leds: lp55xx: Convert LED class registration to devm_*
dt-bindings: leds: Convert leds-lp55xx to yaml
leds: multicolor: Introduce a multicolor class definition
leds: Add multicolor ID to the color ID list
dt: bindings: Add multicolor class dt bindings documention
leds: lp5523: Fix various formatting issues in the code
leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros
...
All the LEDs in the queue are RGB, so they should not use multi for
their color.
Make sure we don't add such LED by mistake (and make it part of ABI).
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Multicolor is a bit too abstract. Yes, we can have
Green-Magenta-Ultraviolet LED, but so far all the LEDs we support are
RGB, and not even RGB-White or RGB-Yellow variants emerged.
Multicolor is not a good fit for RGB LED. It does not really know
about LED color. In particular, there's no way to make LED "white".
Userspace is interested in knowing "this LED can produce arbitrary
color", which not all multicolor LEDs can.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
leds-lp55xx-common.c:(.text+0x9d): undefined reference to `i2c_smbus_read_byte_data'
leds-lp55xx-common.c:(.text+0x8fc): undefined reference to `i2c_smbus_write_byte_data'
These errors happened when I2C=m and LEDS_LP55XX_COMMON=y, so
prevent that from being possible.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: linux-leds@vger.kernel.org
Cc: Milo Kim <milo.kim@ti.com>
Cc: Mathias Nyman <mathias.nyman@nokia.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
This adds basic support for LEDs on the front side of CZ.NIC's Turris
Omnia router.
There are 12 RGB LEDs. The controller supports HW triggering mode for
the LEDs, but this driver does not support it yet, and sets all the LEDs
defined in device-tree into SW mode upon probe.
This driver uses the multicolor LED framework.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Some LED controllers may come with an internal HW triggering mechanism
for the LED and the ability to switch between SW control and the
internal HW control. This includes most PHYs, various ethernet switches,
the Turris Omnia LED controller or AXP20X PMIC.
This adds support for registering such triggers.
This code is based on work by Pavel Machek <pavel@ucw.cz> and
Ondřej Jirman <megous@megous.com>.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Add the multicolor brightness call back to support the multicolor
framework. This function allows setting the brightness across
grouped LED channels in a single call.
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Add the multicolor brightness call back to support the multicolor
framework. This call back allows setting brightness on grouped channels
in a single function.
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Add multicolor framework support for the lp55xx family.
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Convert the LED class registration calls to the LED devm_*
registration calls.
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Introduce a multicolor class that groups colored LEDs
within a LED node.
The multicolor class groups monochrome LEDs and allows controlling two
aspects of the final combined color: hue and lightness. The former is
controlled via the intensity file and the latter is controlled
via brightness file.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
[squashed leds: multicolor: Fix camel case in documentation in]
Add a new color ID that is declared as MULTICOLOR as with the
multicolor framework declaring a definitive color is not accurate
as the node can contain multiple colors.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Fix checkpatch errors and warnings for the LP5523.c device
driver.
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Fix the checkpatch warnings for the use of the file permission macros.
In converting the file permissions to the DEVICE_ATTR_XX macros the
call back function names needed to be updated within the code.
This means that the lp55xx_ needed to be dropped in the name to keep in
harmony with the ABI documentation.
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes. Also, remove unnecessary
function sizeof_gpio_leds_priv().
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes. Also, remove unnecessary
function sizeof_ns2_led_priv().
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The leds-gpio driver mixes up the legacy GPIO flags with the
GPIO descriptor flags and passes a legacy flag to
devm_gpiod_get_index().
Fix this by replacing the flags variable with the strict
descriptor flag.
Fixes: 45d4c6de4e ("leds: gpio: Try to lookup gpiod from device")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Sometimes LED won't be turned off by LED_CORE_SUSPENDRESUME flag upon
system suspend.
led_set_brightness_nopm() uses schedule_work() to set LED brightness.
However, there's no guarantee that the scheduled work gets executed
because no one flushes the work.
So flush the scheduled work to make sure LED gets turned off.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Fixes: 81fe8e5b73 ("leds: core: Add led_set_brightness_nosleep{nopm} functions")
Signed-off-by: Pavel Machek <pavel@ucw.cz>
If the GPIO has not been configured yet, writing to inverted will raise
a kernel warning.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
This driver provides a GPIO chip, so include <linux/gpio/driver.h>
and not the legacy <linux/gpio.h> header.
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Matt Spinler <mspinler@linux.vnet.ibm.com>
Cc: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The LP55xx driver is already using the of_gpio() functions to
pick a global GPIO number for "enable" from the device tree and
request the line. Simplify it by just using a GPIO descriptor.
Make sure to keep the enable GPIO line optional, change the
naming from "lp5523_enable" to "LP55xx enable" to reflect that
this is used on all LP55xx LED drivers.
Cc: Milo Kim <milo.kim@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
This converts the s3c24xx LED driver to use GPIO descriptors
and also modify all board files to account for these changes
by registering the appropriate GPIO tables for each board.
The driver was using a custom flag to indicate open drain
(tristate) but this can be handled by standard descriptor
machine tables.
The driver was setting non-pull-up for the pin using the custom
S3C24xx GPIO API, but this is a custom pin control system used
by the S3C24xx and no generic GPIO function, so this has simply
been pushed back into the respective board files.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Right now the driver uses only 3 LED modes:
0: On
1: HW Blinking (Interval 1)
3: Off
However, the controller supports a second HW blinking interval, which results
in 4 possible LED modes:
0: On
1: HW Blinking (Interval 1)
2: HW Blinking (Interval 2)
3: Off
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Drop the pointless and needlessly confusing casts of struct-device
pointers.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 8d3b6a4001 ("leds: wm831x-status: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot use devres so that
deregistration ends up being tied to the parent device, something which
leads to use-after-free on driver unbind when the class device is
released while still being registered.
Fixes: 11e1bbc116 ("leds: lm36274: Introduce the TI LM36274 LED driver")
Cc: stable <stable@vger.kernel.org> # 5.3
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 50154e29e5 ("leds: lm3533: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: eed16255d6 ("leds: da903x: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 375446df95 ("leds: 88pm860x: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
