mirror of
https://github.com/torvalds/linux.git
synced 2024-12-18 09:02:17 +00:00
99387b0160
9049 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Rafael J. Wysocki
|
99387b0160 |
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
Modify acpi_processor_get_platform_limit() to avoid updating its frequency QoS request when the _PPC return value has not changed by comparing that value to the previous _PPC return value stored in the performance_platform_limit field of the struct acpi_processor corresponding to the given CPU. While at it, do the _PPC return value check against the state count earlier, to avoid setting performance_platform_limit to an invalid value, and make acpi_processor_ppc_init() use FREQ_QOS_MAX_DEFAULT_VALUE as the "no limit" frequency QoS for consistency. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
c02d5feb6e |
ACPI: processor: perflib: Use the "no limit" frequency QoS
When _PPC returns 0, it means that the CPU frequency is not limited by the platform firmware, so make acpi_processor_get_platform_limit() update the frequency QoS request used by it to "no limit" in that case. This addresses a problem with limiting CPU frequency artificially on some systems after CPU offline/online to the frequency that corresponds to the first entry in the _PSS return package. Reported-by: Pratyush Yadav <ptyadav@amazon.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Pratyush Yadav <ptyadav@amazon.de> Tested-by: Pratyush Yadav <ptyadav@amazon.de> |
||
Zhou jie
|
fbf757e55a |
ACPI: processor: idle: Drop unnecessary (void *) conversion
The (void *) type pointer does not need to be cast, so don't do that in lapic_timer_check_state(). Signed-off-by: Zhou jie <zhoujie@nfschina.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Steven Rostedt (Google)
|
292a089d78 |
treewide: Convert del_timer*() to timer_shutdown*()
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Linus Torvalds
|
057b40f43c |
More ACPI updates for 6.2-rc1
- Avoid trying to resolve operands in AML when there are none (Amadeusz
Sławiński).
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede).
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space (Hans
de Goede).
- Defer the evaluation of _REG for ECDT described ECs till the matching
EC device in the DSDT gets parsed and acpi_ec_add() gets called for
it (Hans de Goede).
- Fix EC address space handler unregistration (Hans de Goede).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmObX+MSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxZgQP/1kpPLxnqr494PuL9iUROJ+PO26NhKU/
//41rUQBE3ukib8BlAs1TEOjU/4oKWdMf9L4053kyYNRpMdC222HL1ZqkHKzPXM5
wH+NyBiLgjbGaktrLpXu5dt2rClt7GXgKmfCF+TVS/3JW3HKKOXg1Ly1jphwpw/n
GdVvXwQfmh1XyLXvLkMFETMevaHagJIQJb2tSLFN7xOOtmm0qlTlCdCA8eOI40zR
fIWfJEKUX41tOuAufBzHb1/PQ8r0l6Gk7ELpIEC+r6o54+b1xfYRUwx/cUB50pIF
hRKSLCB+Pkbm/L1Z9AJWu0LuWPf7z0p96PTse4K3Fs66fdIuHH3AQ7ezFMTmX06l
sCDa48O6l9/oJT/JMzLERTleRXicxJchPo+C6EQNJsnRWSGuPZYusFHnmrqkgkgg
az56QXs3mJ0naKZ8Kz+ZrOrxdu1rOv5ehBcpeiEphsGE9ujT/DAAlqBbxri9nKvN
VWSoFqDKg5VFP5UnxG3cP9PV73723qusvp/XAW4HLMWVs8Ujr1PtEUE+OK+SxnIx
zC+HA401ziFizsCgvYn2r+ODSHYjRgn8gqHVQm9VPKSSNgWOwN846ttbgxvPCuTW
K9RINJKnCA0QmIU5ooCItTrvpl9mleSeYjQcshKb/kOUW34wtRWZ5SyiNLKGhoKm
N6yIXo/F+lBz
=HlyI
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix an AML byte code execution issue in ACPICA and two issues in
the ACPI EC driver which requires rearranging ACPICA code.
Specifics:
- Avoid trying to resolve operands in AML when there are none
(Amadeusz Sławiński)
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede)
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space
(Hans de Goede)
- Defer the evaluation of _REG for ECDT described ECs till the
matching EC device in the DSDT gets parsed and acpi_ec_add() gets
called for it (Hans de Goede)
- Fix EC address space handler unregistration (Hans de Goede)"
* tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Fix ECDT probe ordering issues
ACPI: EC: Fix EC address space handler unregistration
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPICA: include/acpi/acpixf.h: Fix indentation
ACPICA: Fix operand resolution
|
||
|
Rafael J. Wysocki
|
3d03140c48 |
Merge branch 'acpi-ec'
Merge additional ACPI EC driver fixes for 6.2-rc1: - Fix EC address space handler unregistration (Hans de Goede). - Defer the evaluation of _REG for ECDT described ECs till the matching EC device in the DSDT gets parsed and acpi_ec_add() gets called for it (Hans de Goede). * acpi-ec: ACPI: EC: Fix ECDT probe ordering issues ACPI: EC: Fix EC address space handler unregistration |
||
|
Rafael J. Wysocki
|
f7eae09b50 |
Merge branch 'acpica'
Merge additional ACPICA changes for 6.2-rc1: - Avoid trying to resolve operands in AML when there are none (Amadeusz Sławiński). - Fix indentation in include/acpi/acpixf.h to help applying patches from the upstream ACPICA git (Hans de Goede). - Make it possible to install an address space handler without evaluating _REG for Operation Regions in the given address space (Hans de Goede). * acpica: ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps ACPICA: include/acpi/acpixf.h: Fix indentation ACPICA: Fix operand resolution |
||
|
Linus Torvalds
|
e2ca6ba6ba |
MM patches for 6.2-rc1.
- More userfaultfs work from Peter Xu. - Several convert-to-folios series from Sidhartha Kumar and Huang Ying. - Some filemap cleanups from Vishal Moola. - David Hildenbrand added the ability to selftest anon memory COW handling. - Some cpuset simplifications from Liu Shixin. - Addition of vmalloc tracing support by Uladzislau Rezki. - Some pagecache folioifications and simplifications from Matthew Wilcox. - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it. - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series shold have been in the non-MM tree, my bad. - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages. - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages. - Peter Xu utilized the PTE marker code for handling swapin errors. - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient. - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand. - zram support for multiple compression streams from Sergey Senozhatsky. - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway. - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations. - Vishal Moola removed the try_to_release_page() wrapper. - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache. - David Hildenbrand did some cleanup and repair work on KSM COW breaking. - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend. - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range(). - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen. - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect. - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages(). - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting. - David Hildenbrand has fixed some of our MM selftests for 32-bit machines. - Many singleton patches, as usual. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml CodAgiA51qwzId3GRytIo/tfWZSezgA= =d19R -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - More userfaultfs work from Peter Xu - Several convert-to-folios series from Sidhartha Kumar and Huang Ying - Some filemap cleanups from Vishal Moola - David Hildenbrand added the ability to selftest anon memory COW handling - Some cpuset simplifications from Liu Shixin - Addition of vmalloc tracing support by Uladzislau Rezki - Some pagecache folioifications and simplifications from Matthew Wilcox - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series should have been in the non-MM tree, my bad - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages - Peter Xu utilized the PTE marker code for handling swapin errors - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand - zram support for multiple compression streams from Sergey Senozhatsky - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations - Vishal Moola removed the try_to_release_page() wrapper - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache - David Hildenbrand did some cleanup and repair work on KSM COW breaking - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range() - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages() - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting - David Hildenbrand has fixed some of our MM selftests for 32-bit machines - Many singleton patches, as usual * tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits) mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio mm: mmu_gather: allow more than one batch of delayed rmaps mm: fix typo in struct pglist_data code comment kmsan: fix memcpy tests mm: add cond_resched() in swapin_walk_pmd_entry() mm: do not show fs mm pc for VM_LOCKONFAULT pages selftests/vm: ksm_functional_tests: fixes for 32bit selftests/vm: cow: fix compile warning on 32bit selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem mm,thp,rmap: fix races between updates of subpages_mapcount mm: memcg: fix swapcached stat accounting mm: add nodes= arg to memory.reclaim mm: disable top-tier fallback to reclaim on proactive reclaim selftests: cgroup: make sure reclaim target memcg is unprotected selftests: cgroup: refactor proactive reclaim code to reclaim_until() mm: memcg: fix stale protection of reclaim target memcg mm/mmap: properly unaccount memory on mas_preallocate() failure omfs: remove ->writepage jfs: remove ->writepage ... |
||
|
Linus Torvalds
|
75f4d9af8b |
iov_iter work; most of that is about getting rid of
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
||
|
Linus Torvalds
|
7adcadb984 |
- Make ghes_edac a simple module like the rest of the EDAC drivers and
drop this forced built-in only configuration by disentangling it from GHES. Work by Jia He. - The usual small cleanups and improvements all over EDAC land -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOXPvoACgkQEsHwGGHe VUq98xAAmhz4u9e9pXG0Ixkx25ZtnZ+YxANeQ53Hsa2gWicbcoFgL2E30gi97c1y X9W361B2Q5dYq+J/YRUnEOXlI/KMWLxzNykSvVipUFNfxXZH+PijEAArz2V35/uE 6ZISRLUYVYEtHEoUXbTogeyBmBUnIaJfYheZCluDQlWPggsDESP1qmE+FTg25OBs rDl5y+zUZYPxrWustNodVThPyhdMwGyYAUS6qYKCoNs9SNkAjGnrXoPc9j/U+cV+ qMY2dNS3uKnCujKEssQhcHucyWgCEDvmEKWMH4ItryV2UBBjpNRoM6HDe7XFKwVJ riOKX8VDrpdSdlV1jbCx9KB47BUwFygOYsFdW7gIDJ1hb8usN4nSYQNDIlZKEIQG cHNpv2XGT+pCSvyc4Iv2Fgyvnp25XensSQwQAtk5Y4/lJL1yrgcPjMOkPmRS+mmH BclDWNbL+gwqkyWxgfoivDBOetLgwJYTr2ewBr6QbBtwLB8rL4BxXIdomcoFPuxi jAxixZnTbS+Xq5S7uYK4r6KbaHGcJtwolXMGjx13IHmPfvYtTTQzfRcrBlAtQ/pV BDLoygmDVlkhSVx6bi5V5QZ06rcWYR4cRsBQ54FnBGMr730ZljgFONOHFtUab28T C+YUOaeLEYEYI0cIkkyoSuiz6avB6YvQAiyEPM0EdHZrQFwhBBw= =DFp8 -----END PGP SIGNATURE----- Merge tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Make ghes_edac a simple module like the rest of the EDAC drivers and drop the forced built-in only configuration by disentangling it from GHES (Jia He) - The usual small cleanups and improvements all over EDAC land * tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper() EDAC/i5400: Fix typo in comment: vaious -> various EDAC/mc_sysfs: Increase legacy channel support to 12 MAINTAINERS: Make Mauro EDAC reviewer MAINTAINERS: Make Manivannan Sadhasivam the maintainer of qcom_edac EDAC/igen6: Return the correct error type when not the MC owner apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg() EDAC: Check for GHES preference in the chipset-specific EDAC drivers EDAC/ghes: Make ghes_edac a proper module EDAC/ghes: Prepare to make ghes_edac a proper module EDAC/ghes: Add a notifier for reporting memory errors efi/cper: Export several helpers for ghes_edac to use EDAC/i5000: Mark as BROKEN |
||
|
Linus Torvalds
|
c1f0fcd85d |
cxl for 6.2
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device unlock.
- Add a facility for the kernel to warn about collisions between kernel
and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY5UpyAAKCRDfioYZHlFs
Z0ttAP4uxCjIibKsFVyexpSgI4vaZqQ9yt9NesmPwonc0XookwD+PlwP6Xc0d0Ox
t0gJ6+pwdh11NRzhcNE1pAaPcJZU4gs=
=HAQk
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.2.
While it may seem backwards, the CXL update this time around includes
some focus on CXL 1.x enabling where the work to date had been with
CXL 2.0 (VH topologies) in mind.
First generation CXL can mostly be supported via BIOS, similar to DDR,
however it became clear there are use cases for OS native CXL error
handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x
hosts (Restricted CXL Host (RCH) topologies). So, this update brings
RCH topologies into the Linux CXL device model.
In support of the ongoing CXL 2.0+ enabling two new core kernel
facilities are added.
One is the ability for the kernel to flag collisions between userspace
access to PCI configuration registers and kernel accesses. This is
brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware
mailbox over config-cycles.
The other is a cpu_cache_invalidate_memregion() API that maps to
wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest
VMs and architectures that do not support it yet. The CXL paths that
need it, dynamic memory region creation and security commands (erase /
unlock), are disabled when it is not present.
As for the CXL 2.0+ this cycle the subsystem gains support Persistent
Memory Security commands, error handling in response to PCIe AER
notifications, and support for the "XOR" host bridge interleave
algorithm.
Summary:
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device
unlock.
- Add a facility for the kernel to warn about collisions between
kernel and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL
1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits)
cxl/region: Fix memdev reuse check
cxl/pci: Remove endian confusion
cxl/pci: Add some type-safety to the AER trace points
cxl/security: Drop security command ioctl uapi
cxl/mbox: Add variable output size validation for internal commands
cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size
cxl/security: Fix Get Security State output payload endian handling
cxl: update names for interleave ways conversion macros
cxl: update names for interleave granularity conversion macros
cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry
tools/testing/cxl: Require cache invalidation bypass
cxl/acpi: Fail decoder add if CXIMS for HBIG is missing
cxl/region: Fix spelling mistake "memergion" -> "memregion"
cxl/regs: Fix sparse warning
cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
tools/testing/cxl: Add an RCH topology
cxl/port: Add RCD endpoint port enumeration
cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem
tools/testing/cxl: Add XOR Math support to cxl_test
cxl/acpi: Support CXL XOR Interleave Math (CXIMS)
...
|
||
|
Linus Torvalds
|
456ed864fd |
ACPI updates for 6.2-rc1
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=GVzp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
|
||
|
Linus Torvalds
|
9d33edb20f |
Updates for the interrupt core and driver subsystem:
- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
|
||
|
Linus Torvalds
|
7a76117f9f |
platform-drivers-x86 for v6.2-1
Highlights:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having
to add more and more quirks
- android-x86-tablets: Add support for 2 more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- battery: Pass battery hook pointer to hook callbacks
ISST:
- Fix typo in comments
Move existing HP drivers to a new hp subdir:
- Move existing HP drivers to a new hp subdir
dell:
- Add new dell-wmi-ddv driver
dell-ddv:
- Warn if ePPID has a suspicious length
- Improve buffer handling
huawei-wmi:
- remove unnecessary member
- fix return value calculation
- do not hard-code sizes
ideapad-laptop:
- Make touchpad_ctrl_via_ec a module option
- Stop writing VPCCMD_W_TOUCHPAD at probe time
- Send KEY_TOUCHPAD_TOGGLE on some models
- Only toggle ps2 aux port on/off on select models
- Do not send KEY_TOUCHPAD* events on probe / resume
- Refactor ideapad_sync_touchpad_state()
- support for more special keys in WMI
- Add new _CFG bit numbers for future use
- Revert "check for touchpad support in _CFG"
intel/pmc:
- Relocate Alder Lake PCH support
- Relocate Tiger Lake PCH support
- Relocate Ice Lake PCH support
- Relocate Cannon Lake Point PCH support
- Relocate Sunrise Point PCH support
- Move variable declarations and definitions to header and core.c
- Replace all the reg_map with init functions
intel/pmc/core:
- Add Meteor Lake support to pmc core driver
intel_scu_ipc:
- fix possible name leak in __intel_scu_ipc_register()
mxm-wmi:
- fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/mellanox:
- mlxbf-pmc: Fix event typo
- Add BlueField-3 support in the tmfifo driver
platform/x86/amd:
- pmc: Add a workaround for an s0i3 issue on Cezanne
platform/x86/amd/pmf:
- pass the struct by reference
platform/x86/dell:
- alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86/intel:
- pmc: Fix repeated word in comment
platform/x86/intel/hid:
- Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86/intel/sdsi:
- Add meter certificate support
- Support different GUIDs
- Hide attributes if hardware doesn't support
- Add Intel On Demand text
sony-laptop:
- Convert to use sysfs_emit_at() API
thinkpad_acpi:
- use strstarts()
- Fix max_brightness of thinklight
tools/arch/x86:
- intel_sdsi: Add support for reading meter certificates
- intel_sdsi: Add support for new GUID
- intel_sdsi: Read more On Demand registers
- intel_sdsi: Add Intel On Demand text
- intel_sdsi: Add support for reading state certificates
uv_sysfs:
- Use sysfs_emit() instead of scnprintf()
wireless-hotkey:
- use ACPI HID as phys
x86-android-tablets:
- Add Advantech MICA-071 extra button
- Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
- Add Medion Lifetab S10346 data
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmOW+QgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yAPwf/dAYLHiC2ox5YlNTLX2DvU+jOpeBv
W+EIx4oHQz1+O9jrWMLyvS9zTwTEAf6ANLiMP3damEvtJnB72ClgFITzlJAaB4zN
yj0SdxoBRMt6zDL2QwMkwitvb5kJonLfO2H7NsMwA6f0KP1X8sio3oVRAMMVwlzz
nwDKM/VBpuxmy+d880wRRoAkgRkTsPIOwBkYdo1525NU7kkTmtrMpgM+SXQsHTJn
TB9uQnyuiq5/znh3k1Qn+OGwXQezmGz2Fb76IcW5RzUQDew6n6b3kzILee5ddynT
Pa7/ibwpV+FtZjm2kS/l4tV+WPdA+s5TSWoq7Hz0jzBX9GdOORcMZmEneg==
=z16d
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- Ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having to
add more and more quirks
- Android x86 tablets:
- Add support for two more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
* tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (52 commits)
platform/mellanox: mlxbf-pmc: Fix event typo
platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
platform/x86: sony-laptop: Convert to use sysfs_emit_at() API
platform/x86/dell: alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86: uv_sysfs: Use sysfs_emit() instead of scnprintf()
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/x86: x86-android-tablets: Add Advantech MICA-071 extra button
platform/x86: x86-android-tablets: Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
platform/x86: x86-android-tablets: Add Medion Lifetab S10346 data
platform/x86: wireless-hotkey: use ACPI HID as phys
platform/x86/intel/hid: Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86: ideapad-laptop: Make touchpad_ctrl_via_ec a module option
platform/x86: ideapad-laptop: Stop writing VPCCMD_W_TOUCHPAD at probe time
platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models
platform/x86: ideapad-laptop: Only toggle ps2 aux port on/off on select models
platform/x86: ideapad-laptop: Do not send KEY_TOUCHPAD* events on probe / resume
platform/x86: ideapad-laptop: Refactor ideapad_sync_touchpad_state()
tools/arch/x86: intel_sdsi: Add support for reading meter certificates
tools/arch/x86: intel_sdsi: Add support for new GUID
tools/arch/x86: intel_sdsi: Read more On Demand registers
...
|
||
|
Linus Torvalds
|
06cff4a58e |
arm64 updates for 6.2
ACPI:
* Enable FPDT support for boot-time profiling
* Fix CPU PMU probing to work better with PREEMPT_RT
* Update SMMUv3 MSI DeviceID parsing to latest IORT spec
* APMT support for probing Arm CoreSight PMU devices
CPU features:
* Advertise new SVE instructions (v2.1)
* Advertise range prefetch instruction
* Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
* Enable DIT (Data Independent Timing) when running in the kernel
* More conversion of system register fields over to the generated
header
CPU misfeatures:
* Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
* Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's
pointer authentication feature when it is supported (complete
with scary DWARF parser!)
Tracing and debug:
* Remove static ftrace in favour of, err, dynamic ftrace!
* Seperate 'struct ftrace_regs' from 'struct pt_regs' in core
ftrace and existing arch code
* Introduce and implement FTRACE_WITH_ARGS on arm64 to replace
the old FTRACE_WITH_REGS
* Extend 'crashkernel=' parameter with default value and fallback
to placement above 4G physical if initial (low) allocation
fails
SVE:
* Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
* Rework of undefined instruction handling to avoid serialisation
on global lock (this includes emulation of user accesses to the
ID registers)
Perf and PMU:
* Support for TLP filters in Hisilicon's PCIe PMU device
* Support for the DDR PMU present in Amlogic Meson G12 SoCs
* Support for the terribly-named "CoreSight PMU" architecture
from Arm (and Nvidia's implementation of said architecture)
Misc:
* Tighten up our boot protocol for systems with memory above
52 bits physical
* Const-ify static keys to satisty jump label asm constraints
* Trivial FFA driver cleanups in preparation for v1.1 support
* Export the kernel_neon_* APIs as GPL symbols
* Harden our instruction generation routines against
instrumentation
* A bunch of robustness improvements to our arch-specific selftests
* Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOPLFAQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPRcCACLyDTvkimiqfoPxzzgdkx/6QOvw9s3/mXg
UcTORSZBR1VnYkiMYEKVz/tTfG99dnWtD8/0k/rz48NbhBfsF2sN4ukyBBXVf0zR
fjnaVyVC11LUgBgZKPo6maV+jf/JWf9hJtpPl06KTiPb2Hw2JX4DXg+PeF8t2hGx
NLH4ekQOrlDM8mlsN5mc0YsHbiuO7Xe/NRuet8TsgU4bEvLAwO6bzOLVUMqDQZNq
bQe2ENcGVAzAf7iRJb38lj9qB/5hrQTHRXqLXMSnJyyVjQEwYca0PeJMa7x30bXF
ZZ+xQ8Wq0mxiffZraf6SE34yD4gaYS4Fziw7rqvydC15vYhzJBH1
=hV+2
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights this time are support for dynamically enabling and
disabling Clang's Shadow Call Stack at boot and a long-awaited
optimisation to the way in which we handle the SVE register state on
system call entry to avoid taking unnecessary traps from userspace.
Summary:
ACPI:
- Enable FPDT support for boot-time profiling
- Fix CPU PMU probing to work better with PREEMPT_RT
- Update SMMUv3 MSI DeviceID parsing to latest IORT spec
- APMT support for probing Arm CoreSight PMU devices
CPU features:
- Advertise new SVE instructions (v2.1)
- Advertise range prefetch instruction
- Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
- Enable DIT (Data Independent Timing) when running in the kernel
- More conversion of system register fields over to the generated
header
CPU misfeatures:
- Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
- Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's pointer
authentication feature when it is supported (complete with scary
DWARF parser!)
Tracing and debug:
- Remove static ftrace in favour of, err, dynamic ftrace!
- Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
and existing arch code
- Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
old FTRACE_WITH_REGS
- Extend 'crashkernel=' parameter with default value and fallback to
placement above 4G physical if initial (low) allocation fails
SVE:
- Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
- Rework of undefined instruction handling to avoid serialisation on
global lock (this includes emulation of user accesses to the ID
registers)
Perf and PMU:
- Support for TLP filters in Hisilicon's PCIe PMU device
- Support for the DDR PMU present in Amlogic Meson G12 SoCs
- Support for the terribly-named "CoreSight PMU" architecture from
Arm (and Nvidia's implementation of said architecture)
Misc:
- Tighten up our boot protocol for systems with memory above 52 bits
physical
- Const-ify static keys to satisty jump label asm constraints
- Trivial FFA driver cleanups in preparation for v1.1 support
- Export the kernel_neon_* APIs as GPL symbols
- Harden our instruction generation routines against instrumentation
- A bunch of robustness improvements to our arch-specific selftests
- Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: alternatives: add __init/__initconst to some functions/variables
arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
arm64/sysreg: Convert MVFR2_EL1 to automatic generation
arm64/sysreg: Convert MVFR1_EL1 to automatic generation
arm64/sysreg: Convert MVFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
...
|
||
|
Rafael J. Wysocki
|
bee74dcbd3 |
Merge branches 'acpi-fan', 'acpi-pcc', 'acpi-misc' and 'pnp'
Merge ACPI fan driver fixes, ACPI PCC driver fixes, miscellaneous ACPI cleanups and PNP updates for 6.2-rc1: - Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface code (ye xingchen). - Fix the _FIF package extraction failure handling in the ACPI fan driver (Hanjun Guo). - Fix the PCC mailbox handling error code path (Huisong Li). - Avoid using PCC Opregions if there is no platform interrupt allocated for this purpose (Huisong Li). - Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and CPPC library (ye xingchen). - Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng Wang). - Fix name memory leak in pnp_alloc_dev() (Yang Yingliang). - Do not disable PNP devices on suspend when they cannot be re-enabled on resume (Hans de Goede). * acpi-fan: ACPI: fan: Convert to use sysfs_emit_at() API ACPI: fan: Bail out if extract package failed * acpi-pcc: mailbox: pcc: Reset pcc_chan_count to zero in case of PCC probe failure ACPI: PCC: Setup PCC Opregion handler only if platform interrupt is available * acpi-misc: ACPI: use sysfs_emit() instead of scnprintf() ACPI: irq: Fix some kernel-doc issues * pnp: PNP: Do not disable devices on suspend when they cannot be re-enabled on resume PNP: fix name memory leak in pnp_alloc_dev() |
||
|
Rafael J. Wysocki
|
39f26d1012 |
Merge branches 'acpi-apei', 'acpi-x86', 'acpi-battery' and 'acpi-pfrut'
Make ACPI APEI updates, x86-specific ACPI updates, ACPI battery driver fix and ACPI PFRU/T driver fixes for 6.2-rc1: - Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König). - Use xchg_release() instead of cmpxchg() for updating new GHES cache slots (Ard Biesheuvel). - Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu). - Add new I2C device enumeration quirks for Medion Lifetab S10346 and Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede). - Make the ACPI battery driver notify user space about adding new battery hooks and removing the existing ones (Armin Wolf). - Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE() for freeing acpi_object structures to help diagnostics (Wang ShaoBo). * acpi-apei: ACPI: APEI: EINJ: Refactor available_error_type_show() ACPI: APEI: EINJ: Fix formatting errors ACPI: APEI: Remove a useless include ACPI: APEI: Silence missing prototype warnings apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg() ACPI: APEI: Drop unsetting driver data on remove * acpi-x86: ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346 ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F) * acpi-battery: ACPI: battery: Call power_supply_changed() when adding hooks * acpi-pfrut: ACPI: pfr_update: use ACPI_FREE() to free acpi_object ACPI: pfr_telemetry: use ACPI_FREE() to free acpi_object |
||
|
Rafael J. Wysocki
|
6f1581810b |
Merge branches 'acpi-pm', 'acpi-processor', 'acpi-ec' and 'acpi-video'
Make ACPI power management changes, ACPI processor driver updates, ACPI EC driver quirk and ACPI backlight driver updates for 6.2-rc1: - Print full name paths of ACPI power resources objects during enumeration (Kane Chen). - Eliminate a compiler warning regarding a missing function prototype in the ACPI power management code (Sudeep Holla). - Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong, Colin Ian King, Sudeep Holla). - Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC driver (Mia Kanashi). - Add some mew ACPI backlight handling quirks and update some existing ones (Hans de Goede). - Make the ACPI backlight driver prefer the native backlight control over vendor backlight control when possible (Hans de Goede). * acpi-pm: ACPI: PM: Silence missing prototype warning ACPI: PM: Print full name path while adding power resource * acpi-processor: ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value ACPI: processor: perflib: Rearrange acpi_processor_notify_smm() ACPI: processor: perflib: Rearrange unregistration routine ACPI: processor: perflib: Drop redundant parentheses ACPI: processor: perflib: Adjust white space ACPI: processor: idle: Drop unnecessary statements and parens ACPI: processor: Silence missing prototype warnings ACPI: processor_idle: Silence missing prototype warnings ACPI: processor: throttling: remove variable count ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value * acpi-ec: ACPI: EC: Add quirk for the HP Pavilion Gaming 15-cx0041ur * acpi-video: ACPI: video: Prefer native over vendor ACPI: video: Simplify __acpi_video_get_backlight_type() ACPI: video: Add force_native quirk for Sony Vaio VPCY11S1E ACPI: video: Add force_vendor quirk for Sony Vaio PCG-FRV35 ACPI: video: Change Sony Vaio VPCEH3U1E quirk to force_native ACPI: video: Change GIGABYTE GB-BXBT-2807 quirk to force_none ACPI: video: Add a few bugtracker links to DMI quirks |
||
|
Rafael J. Wysocki
|
45494d77f2 |
Merge branches 'acpi-scan', 'acpi-bus', 'acpi-tables' and 'acpi-sysfs'
Merge ACPI changes related to device enumeration, device object managenet, operation region handling, table parsing and sysfs interface: - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti). - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li). - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla). - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen). - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda). * acpi-scan: ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0) * acpi-bus: ACPI: FFH: Silence missing prototype warnings ACPI: make remove callback of ACPI driver void ACPI: bus: Fix the _OSC capability check for FFH OpRegion arm64: Add architecture specific ACPI FFH Opregion callbacks ACPI: Implement a generic FFH Opregion handler * acpi-tables: ACPI: tables: Fix the stale comments for acpi_locate_initial_tables() ACPI: tables: Print CORE_PIC information when MADT is parsed * acpi-sysfs: ACPI: sysfs: use sysfs_emit() to instead of scnprintf() ACPI: sysfs: Use kstrtobool() instead of strtobool() |
||
|
Rafael J. Wysocki
|
888bc86e7c |
Merge branch 'acpica'
Merge ACPICA changes, including bug fixes and cleanups as well as support for some recently defined data structures, for 6.2-rc1: - Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki). - Add support for loong_arch-specific APICs in MADT (Huacai Chen). - Add support for fixed PCIe wake event (Huacai Chen). - Add EBDA pointer sanity checks (Vit Kabele). - Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele). - Add CCEL table support to both compiler/disassembler (Kuppuswamy Sathyanarayanan). - Add a couple of new UUIDs to the known UUID list (Bob Moore). - Add support for FFH Opregion special context data (Sudeep Holla). - Improve warning message for "invalid ACPI name" (Bob Moore). - Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table (Alison Schofield). - Prepare IORT support for revision E.e (Robin Murphy). - Finish support for the CDAT table (Bob Moore). - Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki). - Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao). - Update the version of the ACPICA code in the kernel (Bob Moore). * acpica: ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() ACPICA: Fix error code path in acpi_ds_call_control_method() ACPICA: Update version to 20221020 ACPICA: Add utcksum.o to the acpidump Makefile Revert "LoongArch: Provisionally add ACPICA data structures" ACPICA: Finish support for the CDAT table ACPICA: IORT: Update for revision E.e ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table ACPICA: Improve warning message for "invalid ACPI name" ACPICA: Add support for FFH Opregion special context data ACPICA: Add a couple of new UUIDs to the known UUID list ACPICA: iASL: Add CCEL table to both compiler/disassembler ACPICA: Do not touch VGA memory when EBDA < 1ki_b ACPICA: Check that EBDA pointer is in valid memory ACPICA: Events: Support fixed PCIe wake event ACPICA: MADT: Add loong_arch-specific APICs support ACPICA: Make acpi_ex_load_op() match upstream |
||
Hans de Goede
|
ab4620f58d |
ACPI: EC: Fix ECDT probe ordering issues
ACPI-2.0 says that the EC OpRegion handler must be available immediately (like the standard default OpRegion handlers): Quoting from the ACPI spec version 6.3: "6.5.4 _REG (Region) ... 2. OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. These operation regions may become inaccessible after OSPM runs _REG(EmbeddedControl, 0)." So acpi_bus_init() calls acpi_ec_ecdt_probe(), which calls acpi_install_address_space_handler() to install the EC's OpRegion handler, early on. This not only installs the OpRegion handler, but also calls the EC's _REG method. The _REG method call is a problem because it may rely on initialization done by the _INI methods of one of the PCI / _SB root devs, see for example: https://bugzilla.kernel.org/show_bug.cgi?id=214899 . Generally speaking _REG methods are executed when the ACPI-device they are part of has a driver bound to it. Where as _INI methods must be executed at table load time (according to the spec). The problem here is that the early acpi_install_address_space_handler() call causes the _REG handler to run too early. To allow fixing this the ACPICA code now allows to split the OpRegion handler installation and the executing of _REG into 2 separate steps. This commit uses this ACPICA functionality to fix the EC probe ordering by delaying the executing of _REG for ECDT described ECs till the matching EC device in the DSDT gets parsed and acpi_ec_add() for it gets called. This moves the calling of _REG for the EC on devices with an ECDT to the same point in time where it is called on devices without an ECDT table. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214899 Reported-and-tested-by: Johannes Penßel <johannespenssel@posteo.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
a5072078db |
ACPI: EC: Fix EC address space handler unregistration
When an ECDT table is present the EC address space handler gets registered on the root node. So to unregister it properly the unregister call also must be done on the root node. Store the ACPI handle used for the acpi_install_address_space_handler() call and use te same handle for the acpi_remove_address_space_handler() call. Reported-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
0634033dd1 | Merge back ACPI EC changes for 6.2-rc1 | ||
|
Hans de Goede
|
54c516aeb8 |
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPI-2.0 says that the EC op_region handler must be available immediately (like the standard default op_region handlers): Quoting from the ACPI spec version 6.3: "6.5.4 _REG (Region) ... 2. OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. These operation regions may become inaccessible after OSPM runs _REG(EmbeddedControl, 0)." So the OS must probe the ECDT described EC and install the OpRegion handler before calling acpi_enable_subsystem() and acpi_initialize_objects(). This is a problem because calling acpi_install_address_space_handler() does not just install the op_region handler, it also runs the EC's _REG method. This _REG method may rely on initialization done by the _INI methods of one of the PCI / _SB root devices. For the other early/default op_region handlers the op_region handler install and the _REG execution is split into 2 separate steps: 1. acpi_ev_install_region_handlers(), called early from acpi_load_tables() 2. acpi_ev_initialize_op_regions(), called from acpi_initialize_objects() To fix the EC op_region issue, add 2 bew functions: 1. acpi_install_address_space_handler_no_reg() 2. acpi_execute_reg_methods() to allow doing things in 2 steps for other op_region handlers, like the EC handler, too. Note that the comment describing acpi_ev_install_region_handlers() even has an alinea describing this problem. Using the new methods allows users to avoid this problem. Link: https://github.com/acpica/acpica/pull/786 Link: https://bugzilla.kernel.org/show_bug.cgi?id=214899 Reported-and-tested-by: Johannes Penßel <johannespenssel@posteo.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Amadeusz Sławiński
|
7dfb216eda |
ACPICA: Fix operand resolution
In our tests we get UBSAN warning coming from ACPI parser. This is caused by trying to resolve operands when there is none. [ 0.000000] Linux version 5.15.0-rc3chromeavsrel1.0.184+ (root@...) (gcc (Ubuntu 10.3.0-1ubuntu1~20.04) 10.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT Sat Oct 16 00:08:27 UTC 2021 ... [ 14.719508] ================================================================================ [ 14.719551] UBSAN: array-index-out-of-bounds in /.../linux/drivers/acpi/acpica/dswexec.c:401:12 [ 14.719594] index -1 is out of range for type 'acpi_operand_object *[9]' [ 14.719621] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc3chromeavsrel1.0.184+ #1 [ 14.719657] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0214.B50.2009111159 09/11/2020 [ 14.719694] Call Trace: [ 14.719712] dump_stack_lvl+0x38/0x49 [ 14.719749] dump_stack+0x10/0x12 [ 14.719775] ubsan_epilogue+0x9/0x45 [ 14.719801] __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 14.719835] acpi_ds_exec_end_op+0x1d7/0x6b5 [ 14.719870] acpi_ps_parse_loop+0x942/0xb34 ... Problem happens because WalkState->NumOperands is 0 and it is used when trying to access into operands table. Actual code is: WalkState->Operands [WalkState->NumOperands -1] which causes out of bound access. Improve the check before above access to check if ACPI opcode should have any arguments (operands) at all. Link: https://github.com/acpica/acpica/pull/745 Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
fa4e1f8804 | Merge back ACPICA changes for 6.2-rc1 | ||
|
Hans de Goede
|
ecc6aaabce |
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
The Medion Lifetab S10346 is a x86 tablet which ships with Android x86 as factory OS. The Android x86 kernel fork ignores I2C devices described in the DSDT, except for the PMIC and Audio codecs. As usual the Medion Lifetab S10346's DSDT contains a bunch of extra I2C devices which are not actually there, causing various resource conflicts. Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Medion Lifetab S10346 to the acpi_quirk_skip_dmi_ids table to woraround this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Jay Lu
|
87386ee83d |
ACPI: APEI: EINJ: Refactor available_error_type_show()
Move error type descriptions into an array and loop over error types to improve readability and maintainability. Replace seq_printf() with seq_puts() as recommended by checkpatch.pl. Signed-off-by: Jay Lu <jaylu102@amd.com> Co-developed-by: Ben Cheatham <benjamin.cheatham@amd.com> Signed-off-by: Ben Cheatham <benjamin.cheatham@amd.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Jay Lu
|
37ea969386 |
ACPI: APEI: EINJ: Fix formatting errors
Checkpatch reveals warnings and an error due to missing lines and incorrect indentations. Add the missing lines after declarations and fix the suspect indentations. Signed-off-by: Jay Lu <jaylu102@amd.com> Signed-off-by: Ben Cheatham <benjamin.cheatham@amd.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
f1a70bac90 |
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
Avoid returning a confusing error code from acpi_processor_notify_smm() if it is called for the second time in the case when SMM notification regarding P-state control is not supported. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
be5c8a046c |
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
Rearrange the code in acpi_processor_notify_smm() to consolidate error handling in it and improve the comments in there while at it. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
5be583c695 |
ACPI: processor: perflib: Rearrange unregistration routine
Rearrange acpi_processor_unregister_performance() to follow a more common error handling pattern and drop a redundant "return" statement from the end of it. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
d8f4ed0728 |
ACPI: processor: perflib: Drop redundant parentheses
Drop some redundant parentheses and rearrange some checks using them in the ACPI processor performance library code for better code clarity. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
3d9e9a96ca |
ACPI: processor: perflib: Adjust white space
Some inconsistent usage of white space in the ACPI processor performance library code causes that code to be somewhat harder to read that it would have been otherwise, so adjust the white space in there to address that. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
b697b812d4 |
ACPI: processor: idle: Drop unnecessary statements and parens
Drop a redundant "else", a "return" statement at the end of a void function and redundant parentheses around an unsigent int variable name from the ACPI processor idle driver. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
57336224da |
ACPI: thermal: Adjust critical.flags.valid check
It is not necessary to compare critical.flags.valid to 1 in acpi_thermal_trips_update() and doing so is also inconsistent with other similar checks in that code, so simply check if the flag is not 0 instead. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Thomas Gleixner
|
6132a490f9 |
irqchip updates for 6.2
- More APCI fixes and improvements for the LoongArch architecture, adding support for the HTVEC irqchip, suspend-resume, and some PCI INTx workarounds - Initial DT support for LoongArch. I'm not even kidding. - Support for the MTK CIRQv2, a minor deviation from the original version - Error handling fixes for wpcm450, GIC... - BE detection for a FSL controller - Declare the Sifive PLIC as wake-up agnostic - Simplify fishing out the device data for the ST irqchip - Mark some data structures as __initconst in the apple-aic driver - Switch over from strtobool to kstrtobool - COMPILE_TEST fixes -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmOQsZ8PHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpDQMwQAJWBLgkSHnPSJizG+KLpDSljRmkUif7j3PBk TVCwfj/xXiCUzP7PBhq2DUZWLvrKIiYl79Z6j/Jz4xlavPAVp6Cs+afxmJF2n/wy OwWF8uevHvFhKIFJUFxrSDaODWGI6afmDT7iflE3/Uz2ahVYoLkz5a10ji78N3JU peeX81i/kZE19w1aCs0sdMgzJufjK98hj55917GGv/IRBAjj2qi2tOZnPdQuE6d4 +vDiRtKDjDZYp9toaaH7DGBlBMG/yQzBhPaXtMnxH9wGK5858sYmHZroeM4FFbPR sJ/rCiaBEuvC6F1JkShKsRqT2DW1BgXYjSPxh+qhzwCOSG32DDjkj6LqVkygSoKQ MogCIkC3C4D0BIiokSdJByN1PWjoynwtYJrUkYPk4fMg7JxHYwee9dCptT81irMM +3L1mqx9CAll7YkzPVwrCbFyJF9K4ax9kjEvSH3E8xZxLKGnS9iqjQBfE9NKILCl tT6dmCJXTXsoGFjK4zz4o2N8i8aOeUz/B3GX5eYD+x0s0riXhg4kYIWFVXsxwJlX VSxBphr5fAQrdgBdOOESmiqNxPv9HuLRyR2mZ4blE4ylDa9NRUd+4UTy8x0bRmxD BO7qPof0CnrplBNEQi7kDtc91q4UxQoOV/G8LoFp454d9imMlAuPMbizTAULpWZu JxPXyrJl =fhi8 -----END PGP SIGNATURE----- Merge tag 'irqchip-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates frim Marc Zyngier: - More APCI fixes and improvements for the LoongArch architecture, adding support for the HTVEC irqchip, suspend-resume, and some PCI INTx workarounds - Initial DT support for LoongArch. I'm not even kidding. - Support for the MTK CIRQv2, a minor deviation from the original version - Error handling fixes for wpcm450, GIC... - BE detection for a FSL controller - Declare the Sifive PLIC as wake-up agnostic - Simplify fishing out the device data for the ST irqchip - Mark some data structures as __initconst in the apple-aic driver - Switch over from strtobool to kstrtobool - COMPILE_TEST fixes |
||
ye xingchen
|
64ee252826 |
ACPI: fan: Convert to use sysfs_emit_at() API
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Dan Williams
|
02fedf1466 |
Merge branch 'for-6.2/cxl-xor' into for-6.2/cxl
Pick up support for "XOR" interleave math when parsing ACPI CFMWS window structures. Fix up conflicts with the RCH emulation already pending in cxl/next. |
||
|
Dan Williams
|
95dddcb5e8 |
Merge branch 'for-6.2/cxl-security' into for-6.2/cxl
Pick CXL PMEM security commands for v6.2. Resolve conflicts with the removal of the cxl_pmem_wq. |
||
Terry Bowman
|
da8380bbbe |
cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
ACPI uses the CXL _OSC support method to communicate the available CXL functionality to FW. The CXL _OSC support method includes a field to indicate the OS is capable of RCD mode. FW can potentially change it's operation depending on the _OSC support method reported by the OS. The ACPI driver currently only sets the ACPI _OSC support method to indicate CXL VH mode. Change the capability reported to also include CXL RCD mode. [1] CXL3.0 Table 9-26 'Interpretation of CXL _OSC Support Field' Signed-off-by: Terry Bowman <terry.bowman@amd.com> [rrichter@amd.com: Reworded patch description.] Signed-off-by: Robert Richter <rrichter@amd.com> Link: http://lore.kernel.org/r/Y4cRV/Sj0epVW7bE@rric.localdomain Link: https://lore.kernel.org/r/166993046717.1882361.10587956243041624761.stgit@dwillia2-xfh.jf.intel.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
7db0aa8cc0 |
Merge "ACPICA: Add CXL 3.0 structures..." into for-6.2/cxl-xor
Pick up:
|
||
|
Dan Williams
|
dc370b28c8 |
nvdimm/region: Move cache management to the region driver
Now that cpu_cache_invalidate_memregion() is generically available, use it to centralize CPU cache management in the nvdimm region driver. This trades off removing redundant per-dimm CPU cache flushing with an opportunistic flush on every region disable event to cover the case of sensitive dirty data in the cache being written back to media after a secure erase / overwrite event. Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166993221550.1995348.16843505129579060258.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Li Zetao
|
470188b09e |
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
There is an use-after-free reported by KASAN:
BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82
Read of size 1 at addr ffff888112afc460 by task modprobe/2111
CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
Call Trace:
<TASK>
kasan_report+0xae/0xe0
acpi_ut_remove_reference+0x3b/0x82
acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5
acpi_ds_store_object_to_local+0x15d/0x3a0
acpi_ex_store+0x78d/0x7fd
acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b
acpi_ps_parse_aml+0x217/0x8d5
...
</TASK>
The root cause of the problem is that the acpi_operand_object
is freed when acpi_ut_walk_package_tree() fails in
acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in
acpi_ut_copy_iobject_to_iobject(). The problem was introduced
by "8aa5e56eeb61" commit, this commit is to fix memory leak in
acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove
operation, lead to "acpi_operand_object" used after free.
Fix it by removing acpi_ut_remove_reference() in
acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage()
is called to copy an internal package object into another internal
package object, when it fails, the memory of acpi_operand_object
should be freed by the caller.
Fixes:
|
||
Armin Wolf
|
98b0cf207b |
ACPI: battery: Call power_supply_changed() when adding hooks
If a battery hook is added to a battery, userspace software is not informed that the available properties of the battery might have changed. This for example causes upower to react slowly if a new battery hook is added during runtime. Fix this by calling power_supply_changed() if a battery hook was successfully added/removed. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
ye xingchen
|
92266c65e0 |
ACPI: use sysfs_emit() instead of scnprintf()
Replace the open-code with sysfs_emit() to simplify the code. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
fe820db352 |
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
The Lenovo Yoga Tab 3 Pro (YT3-X90F) is a x86 (Cherry Trail) tablet which ships with Android x86 as factory OS. The Android x86 kernel fork ignores I2C devices described in the DSDT, except for the PMIC and Audio codecs. As usual the Lenovo Yoga Tab 3 Pro's DSDT contains a bunch of extra I2C devices which are not actually there, causing various resource conflicts. Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Tab 3 Pro to the acpi_quirk_skip_dmi_ids table to woraround this. ACPI_QUIRK_SKIP_I2C_CLIENTS handling uses i2c_acpi_known_good_ids[], so that PMICs and Audio codecs will still be enumerated properly. The Lenovo Yoga Tab 3 Pro uses a Whiskey Cove PMIC, add the INT34D3 HID for this PMIC to the i2c_acpi_known_good_ids[] list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Christophe JAILLET
|
89da5c476d |
ACPI: APEI: Remove a useless include
This file does not use rcu, so there is no point in including <linux/rculist.h>. So just remove it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Jianmin Lv
|
d0c50cc4b9 |
ACPI / PCI: fix LPIC IRQ model default PCI IRQ polarity
On LoongArch based systems, the PCI devices (e.g. SATA controllers and PCI-to-PCI bridge controllers) in Loongson chipsets output high-level interrupt signal to the interrupt controller they are connected (see Loongson 7A1000 Bridge User Manual v2.00, sec 5.3, "For the bridge chip, AC97 DMA interrupts are edge triggered, gpio interrupts can be configured to be level triggered or edge triggered as needed, and the rest of the interrupts are level triggered and active high."), while the IRQs are active low from the perspective of PCI (see Conventional PCI spec r3.0, sec 2.2.6, "Interrupts on PCI are optional and defined as level sensitive, asserted low."), which means that the interrupt output of PCI devices plugged into PCI-to-PCI bridges of Loongson chipset will be also converted to high-level. So high level triggered type is required to be passed to acpi_register_gsi() when creating mappings for PCI devices. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221022075955.11726-2-lvjianmin@loongson.cn |
||
Al Viro
|
de4eda9de2 |
use less confusing names for iov_iter direction initializers
READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |