The maximum number of buffers that can be requested was increased to
64 for the video capture queue. But video capture used a must_blank
array that was still sized for 32 (VIDEO_MAX_FRAME). This caused an
out-of-bounds write when using buffer indices >= 32.
Create a new define MAX_VID_CAP_BUFFERS that is used to access the
must_blank array and set max_num_buffers for the video capture queue.
This solves a crash reported by:
https://bugzilla.kernel.org/show_bug.cgi?id=219258
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: cea70ed416 ("media: test-drivers: vivid: Increase max supported buffers for capture queues")
Cc: stable@vger.kernel.org
As pointed by Coverity, there is a hidden overflow condition there.
As date is signed and u8 is unsigned, doing:
date = (data[0] << 24)
With a value bigger than 07f will make all upper bits of date
0xffffffff. This can be demonstrated with this small code:
<code>
typedef int64_t time64_t;
typedef uint8_t u8;
int main(void)
{
u8 data[] = { 0xde ,0xad , 0xbe, 0xef };
time64_t date;
date = (data[0] << 24) | (data[1] << 16) | (data[2] << 8) | data[3];
printf("Invalid data = 0x%08lx\n", date);
date = ((unsigned)data[0] << 24) | (data[1] << 16) | (data[2] << 8) | data[3];
printf("Expected data = 0x%08lx\n", date);
return 0;
}
</code>
Fix it by converting the upper bit calculation to unsigned.
Fixes: cea28e7a55 ("media: pulse8-cec: reorganize function order")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The logic at get_edid_tag_location() returns either an offset
or an error condition. However, the error condition uses a
non-standard "-1" value. This hits a Coverity bug, as Coverity
assumes that positive values are underflow. While this is a
false positive, returning error codes as -1 is an issue.
So, instead, use -ENOENT to indicate that the tag was not found.
Fixes: 056f2821b6 ("media: cec: extron-da-hd-4k-plus: add the Extron DA HD 4K Plus CEC driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The loop at stb0899_search_carrier() starts with a random
value for cfr, as reported by Coverity.
Initialize it to zero, just like stb0899_dvbs_algo() to ensure
that carrier search won't bail out.
Fixes: 8bd135bab9 ("V4L/DVB (9375): Add STB0899 support")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, adv76xx_log_status() reads some date using
io_read() which may return negative values. The current logic
doesn't check such errors, causing colorspace to be reported
on a wrong way at adv76xx_log_status(), as reported by Coverity.
If I/O error happens there, print a different message, instead
of reporting bogus messages to userspace.
Fixes: 54450f591c ("[media] adv7604: driver for the Analog Devices ADV7604 video decoder")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
as reported by Coverity, if reading SNR registers fail, a negative
number will be returned, causing an underflow when reading SNR
registers.
Prevent that.
Fixes: 8953db793d ("V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO.")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The PLL checks are comparing 64 bit integers with 32 bit
ones, as reported by Coverity. Depending on the values of
the variables, this may underflow.
Fix it ensuring that both sides of the expression are u64.
Fixes: 852b50aeed ("media: On Semi AR0521 sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The current logic allows word to be less than 2. If this happens,
there will be buffer overflows, as reported by smatch. Add extra
checks to prevent it.
While here, remove an unused word = 0 assignment.
Fixes: 6c96dbbc2a ("[media] s5p-jpeg: add support for 5433")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Frequency range is set from sysfs via frequency_range_store(),
being vulnerable to spectre, as reported by smatch:
drivers/media/pci/mgb4/mgb4_cmt.c:231 mgb4_cmt_set_vin_freq_range() warn: potential spectre issue 'cmt_vals_in' [r]
drivers/media/pci/mgb4/mgb4_cmt.c:238 mgb4_cmt_set_vin_freq_range() warn: possible spectre second half. 'reg_set'
Fix it.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
fepriv->auto_sub_step is unsigned. Setting it to -1 is just a
trick to avoid calling continue, as reported by Coverity.
It relies to have this code just afterwards:
if (!ready) fepriv->auto_sub_step++;
Simplify the code by simply setting it to zero and use
continue to return to the while loop.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The dvbdev contains a static variable used to store dvb minors.
The behavior of it depends if CONFIG_DVB_DYNAMIC_MINORS is set
or not. When not set, dvb_register_device() won't check for
boundaries, as it will rely that a previous call to
dvb_register_adapter() would already be enforcing it.
On a similar way, dvb_device_open() uses the assumption
that the register functions already did the needed checks.
This can be fragile if some device ends using different
calls. This also generate warnings on static check analysers
like Coverity.
So, add explicit guards to prevent potential risk of OOM issues.
Fixes: 5dd3f30710 ("V4L/DVB (9361): Dynamic DVB minor allocation")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As reported by Coverity, the logic at tpg_precalculate_line()
blindly rescales the buffer even when scaled_witdh is equal to
zero. If this ever happens, this will cause a division by zero.
Instead, add a WARN_ON_ONCE() to trigger such cases and return
without doing any precalculation.
Fixes: 63881df94d ("[media] vivid: add the Test Pattern Generator")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As detected by Coverity, the error check logic at get_ctrl() is
broken: if ptr_to_user() fails to fill a control due to an error,
no errors are returned and v4l2_g_ctrl() returns success on a
failed operation, which may cause applications to fail.
Add an error check at get_ctrl() and ensure that it will
be returned to userspace without filling the control value if
get_ctrl() fails.
Fixes: 71c689dc2e ("media: v4l2-ctrls: split up into four source files")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
dvb_vb2_expbuf() didn't check if the given buffer index was
for a valid buffer. Add this check.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/linux-media/?q=WARNING+in+vb2_core_reqbufs
Fixes: 7dc866df40 ("media: dvb-core: Use vb2_get_buffer() instead of directly access to buffers array")
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed,
Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=DZVc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
- Add support for s2idle for CPU PM domains on PREEMPT_RT
- Add device managed version of dev_pm_domain_attach|detach_list()
- Improve layout of the debugfs summary table
pmdomain providers:
- amlogic: Remove obsolete vpu domain driver
- bcm: raspberrypi: Add support for devices used as wakeup-sources
- imx: Fixup clock handling for imx93 at driver remove
- rockchip: Add gating support for RK3576
- rockchip: Add support for RK3576 SoC
- Some OF parsing simplifications
- Some simplifications by using dev_err_probe() and guard()
pmdomain consumers:
- qcom/media/venus: Convert to the device managed APIs for PM domains
cpuidle-psci:
- Add support for s2idle/s2ram for the hierarchical topology on PREEMPT_RT
- Some OF parsing simplifications
-----BEGIN PGP SIGNATURE-----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=nWyc
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for s2idle for CPU PM domains on PREEMPT_RT
- Add device managed version of dev_pm_domain_attach|detach_list()
- Improve layout of the debugfs summary table
pmdomain providers:
- amlogic: Remove obsolete vpu domain driver
- bcm: raspberrypi: Add support for devices used as wakeup-sources
- imx: Fixup clock handling for imx93 at driver remove
- rockchip: Add gating support for RK3576
- rockchip: Add support for RK3576 SoC
- Some OF parsing simplifications
- Some simplifications by using dev_err_probe() and guard()
pmdomain consumers:
- qcom/media/venus: Convert to the device managed APIs for PM domains
cpuidle-psci:
- Add support for s2idle/s2ram for the hierarchical topology on
PREEMPT_RT
- Some OF parsing simplifications"
* tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (39 commits)
pmdomain: core: Reduce debug summary table width
pmdomain: core: Move mode_status_str()
pmdomain: core: Fix "managed by" alignment in debug summary
pmdomain: core: Harden inter-column space in debug summary
pmdomain: rockchip: Add gating masks for rk3576
pmdomain: rockchip: Add gating support
pmdomain: rockchip: Simplify dropping OF node reference
pmdomain: mediatek: make use of dev_err_cast_probe()
pmdomain: imx93-pd: drop the context variable "init_off"
pmdomain: imx93-pd: don't unprepare clocks on driver remove
pmdomain: imx93-pd: replace dev_err() with dev_err_probe()
pmdomain: qcom: rpmpd: Simplify locking with guard()
pmdomain: qcom: rpmhpd: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify with dev_err_probe()
pmdomain: imx: gpcv2: Simplify with scoped for each OF child loop
pmdomain: imx: gpc: Simplify with scoped for each OF child loop
pmdomain: rockchip: SimplUlf Hanssonify locking with guard()
pmdomain: rockchip: Simplify with scoped for each OF child loop
pmdomain: qcom-cpr: Use scope based of_node_put() to simplify code.
...
- clean up TTBCR magic numbers and use u32 for this register
- fix clang issue in VFP code leading to kernel oops, caused by
compiler instruction scheduling.
- switch 32-bit Arm to use GENERIC_CPU_DEVICES and use the
arch_cpu_is_hotpluggable() hook.
- pass struct device to arm_iommu_create_mapping() and move over
to use iommu_paging_domain_alloc() rather than iommu_domain_alloc()
- make amba_bustype constant
-----BEGIN PGP SIGNATURE-----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=hhvp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- clean up TTBCR magic numbers and use u32 for this register
- fix clang issue in VFP code leading to kernel oops, caused by
compiler instruction scheduling.
- switch 32-bit Arm to use GENERIC_CPU_DEVICES and use the
arch_cpu_is_hotpluggable() hook.
- pass struct device to arm_iommu_create_mapping() and move over to use
iommu_paging_domain_alloc() rather than iommu_domain_alloc()
- make amba_bustype constant
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9418/1: dma-mapping: Use iommu_paging_domain_alloc()
ARM: 9417/1: dma-mapping: Pass device to arm_iommu_create_mapping()
ARM: 9416/1: amba: make amba_bustype constant
ARM: 9412/1: Convert to arch_cpu_is_hotpluggable()
ARM: 9411/1: Switch over to GENERIC_CPU_DEVICES using arch_register_cpu()
ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros
ARM: 9409/1: mmu: Do not use magic number for TTBCR settings
Add support for the Extron DA HD 4K Plus series of 4K HDMI
Distrubution Amplifiers (aka HDMI Splitters).
These devices support CEC and this driver adds support for the
CEC protocol for both the input and all outputs (2, 4 or 6 outputs,
depending on the model).
It also exports the EDID from the outputs and allows reading and
setting the EDID of the input.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move cec_get/put_device to the media/cec.h header. This
allows CEC drivers to use this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the V4L2_CAP_EDID capability flag is set,
ioctls for enum inputs/outputs and get/set edid are automatically set.
Signed-off-by: Erling Ljunggren <hljunggr@cisco.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All users of ARM IOMMU mappings create them for a particular device, so
change the interface to accept the device rather than forcing a vague
indirection through a bus type. This prepares for making a similar
change to iommu_domain_alloc() itself.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
DMA ops are a helper for architectures and not for drivers to override
the DMA implementation.
Unfortunately driver authors keep ignoring this. Make the fact more
clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers
overriding their dma_ops depend on that. These drivers should probably be
marked broken, but we can give them a bit of a grace period for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6
Acked-by: Robin Murphy <robin.murphy@arm.com>
Drop the redundant comma from mt9v111_of_match array to make the code
clean.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Rectify the logical value of reset-gpio so that it is set to
0 (disabled) during power-on and to 1 (enabled) during power-off.
Set the reset-gpio to GPIO_OUT_HIGH at initialization time to make
sure it starts off in reset. Also drop the "Set XCLR" comment which
is not-so-informative.
The existing usage of imx335 had reset-gpios polarity inverted
(GPIO_ACTIVE_HIGH) in their device-tree sources. With this patch
included, those DTS will not be able to stream imx335 anymore. The
reset-gpio polarity will need to be rectified in the device-tree
sources as shown in [1] example, in order to get imx335 functional
again (as it remains in reset prior to this fix).
Cc: stable@vger.kernel.org
Fixes: 45d19b5fb9 ("media: i2c: Add imx335 camera sensor driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/linux-media/20240729110437.199428-1-umang.jain@ideasonboard.com/
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Omnivision OG01A1B camera sensor is supplied by three power rails,
if supplies are present as device properties, include them into
sensor power up sequence.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Omnivision OG01A1B camera sensor may have a connected active low GPIO
to XSHUTDOWN pad, and if so, include it into sensor power up sequence.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The OmniVision OG01A1B camera sensor has an xvclk supply clock, which
could be described and then explicitly controlled on OF platforms.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
[Sakari Ailus: Use UL specifier for power-up delay cycle value.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Rearrange initializations and checks in probe before population of
the power management functions.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The OmniVision OG01A1B image sensor driver currently supports probing
only on ACPI platforms, the changes adds support of OF platforms to
the driver.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no caller and implementation in tree, so can remove them.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Commit 2989a45717 ("media: ccs: Refactor register reading a little")
removed ccs_read_addr_no_quirk() but left declaration.
Commit 529322112a ("media: ccs: Use V4L2 CCI for accessing sensor
registers") removed ccs_write_addr_no_quirk() and ccs_reg_width() but
leave their declarations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Using dev_err_cast_probe() to simplify the code.
No functional change.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The ov5675 specification says that the gap between XSHUTDN deassert and the
first I2C transaction should be a minimum of 8192 XVCLK cycles.
Right now we use a usleep_rage() that gives a sleep time of between about
430 and 860 microseconds.
On the Lenovo X13s we have observed that in about 1/20 cases the current
timing is too tight and we start transacting before the ov5675's reset
cycle completes, leading to I2C bus transaction failures.
The reset racing is sometimes triggered at initial chip probe but, more
usually on a subsequent power-off/power-on cycle e.g.
[ 71.451662] ov5675 24-0010: failed to write reg 0x0103. error = -5
[ 71.451686] ov5675 24-0010: failed to set plls
The current quiescence period we have is too tight. Instead of expressing
the post reset delay in terms of the current XVCLK this patch converts the
power-on and power-off delays to the maximum theoretical delay @ 6 MHz with
an additional buffer.
1.365 milliseconds on the power-on path is 1.5 milliseconds with grace.
85.3 microseconds on the power-off path is 90 microseconds with grace.
Fixes: 49d9ad719e ("media: ov5675: add device-tree support and support runtime PM")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # RK3399 Puma with
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Analogous to e.g. the imx219 driver. This enables propagating the
V4L2_CID_CAMERA_SENSOR_ROTATION and V4L2_CID_CAMERA_ORIENTATION
values so that userspace - e.g. libcamera - can detect the
correct rotation and orientation from the device tree.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Coding style fixes suggested by Sakari during the
driver review.
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Coding style fixes suggested by Sakari during the
driver review.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Smatch is very confused by a clk_prepare_enable() being called in an
error-path. Fix this warning by moving the clk_prepare_enable() to its
own function.
drivers/media/i2c/tc358746.c:1631 tc358746_suspend() warn: 'tc358746->refclk' from clk_prepare_enable() not released on lines: 1631.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Smatch is very confused by a clk_prepare_enable() being called in an
error-path. Fix this warning by moving the clk_prepare_enable() to its
own function.
drivers/media/i2c/s5c73m3/s5c73m3-core.c:1425 __s5c73m3_power_off() warn: 'state->clock' from clk_prepare_enable() not released on lines: 1425.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Factor out all the power off logic, except clk_disable_unprepare(), to a
new function __ov5645_set_power_off().
This allows ov5645_set_power_on() to excplicitly clean-out the clock
during the error-path.
The following smatch warning is fixed:
drivers/media/i2c/ov5645.c:690 ov5645_set_power_on() warn: 'ov5645->xclk' from clk_prepare_enable() not released on lines: 690.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Factor out all the power off logic, except the clk_disable_unprepare(),
to a new function __ar0521_power_off().
This allows ar0521_power_on() to explicitly clean-out the clock during
the error-path.
The following smatch warning is fixed:
drivers/media/i2c/ar0521.c:912 ar0521_power_on() warn: 'sensor->extclk' from clk_prepare_enable() not released on lines: 912.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
