as they don't exists.
v2: rename gen6_*_mt_* to gen7_*_mt_* as they never get called
with gen6 (Chris)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we get control from BIOS there might be mt forcewake
bits already set. This causes us to do double mt get
without proper clear/ack sequence.
Fix this by clearing mt forcewake register on init,
like we do with older gens.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It occured to me that when we're trying to wake up both render
and media wells on VLV, we might end up calling the low level
force_wake_get/put two times even though one call would be
enough. Make that happen by figuring out which wells really
need to be woken up based on the forcewake counts.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by:Deepak S <deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
VLV is the only platform where we increment/decrement the forcewake
count around register access. Drop the inc/dec on VLV to make the
forcewake code a bit more unified.
The inc/dec are not necessary since we hold the uncore lock around
the whole operation.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the render/media specific forcewake counts to properly restore the
forcewake status after a GPU reset on VLV.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I could swear this was already happening in the current code...
Also, put the reads and writes in a generic place, so we don't forget
it again when we add runtime PM support to new platforms.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just to be sure...
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Because we shouldn't be runtime suspended when forcewake is supposed
to be enabled.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Update commit message - no WARN expected since the bugfix for
issues hit with this assert is already in. And resolve conflicts with
the change from worker to timer for the delayed fw release.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we call gen6_gt_force_wake_put we don't actually put force_wake,
we just schedule gen6_force_wake_work through mod_delayed_work, and
that will eventually release force_wake.
The problem is that we call intel_runtime_pm_put directly at
gen6_gt_force_wake_put, so most of the times we put our runtime PM
reference before the delayed work happens, so we may runtime suspend
while force_wake is still supposed to be enabled if the graphics
autosuspend_delay_ms is too small.
Now the nice thing about the current code is that after it triggers
the delayed work function it gets a refcount, and it only triggers the
delayed work function if refcount is zero. This guarantees that when
we schedule the funciton, it will run before we try to schedule it
again, which simplifies the problem and allows for the current
solution to work properly (hopefully!).
v2: - Keep the VLV refcounts balanced (Jesse)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We don't want to suffer scheduling delay when turning off the GPU after
waking it up to touch registers. Ideally, we only want to keep the GPU
awake for the register access sequence, with a single forcewake dance on
the first access and release immediately after the last. We set a timer
on the first access so that we only dance once and on the next scheduler
tick, we drop the forcewake again.
This moves the cleanup routine from the common i915 workqueue to a timer
func so that we don't anger powertop, and drop the forcewake again
quicker.
v2: Enable the deferred force_wake_put for regular register reads as
well.
v3: Beautification and make sure we disable forcewake when shutting
down.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sometimes generic driver code gets forcewake explicitly by
gen6_gt_force_wake_get(), which check forcewake_count before accessing
hardware. However the register access with gen8_write function access
low level hw accessors directly, ignoring the forcewake_count. This
leads to nested forcewake get from hardware, in ring init and possibly
elsewhere, causing forcewake ack clear errors and/or hangs.
Fix this by checking the forcewake count also in gen8_write
v2: Read side doesn't care about shadowed registers,
Remove __needs_put funkiness from gen8_write. (Ville)
Improved commit message.
References: https://bugs.freedesktop.org/show_bug.cgi?id=74007
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Because whatever.*
* This should contain a fairly long list of issues and still
unresolved resgressions, but I didn't really get a vote.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Nothing's changed here; we just need to bump the generation check.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We need to have the address space when reserving space for the objects.
Since the address space and context are tied together, and reserve
occurs before context switch (for good reason), we must lookup our
context earlier in the process.
This leaves some room for optimizations where we no longer need to use
ctx_id in certain places. This will be addressed in a subsequent patch.
Important tricky bit:
Because slow relocations during execbuffer drop struct_mutex
Perhaps it would be best to acquire the reference when we get the
context, but I'll save that for another day (note I have written the
patch before, and I found the changes required to be uglier than this).
Note that since we currently access everything via context id, and not
the data structure this is fine, though not desirable. The next change
attempts to get the context only once via the context ID idr lookup, and
as such, the following can happen:
CTX-A is created, refcount = 1
CTX-A execbuf, mutex dropped
close IOCTL called on CTX-A, refcount = 0
CTX-A resumes in execbuf.
v2: Rebased on top of
commit b6359918b8
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Wed Oct 30 15:44:16 2013 +0200
drm/i915: add i915_get_reset_stats_ioctl
v3: Rebased on top of
commit 25b3dfc87b
Author: Mika Westerberg <mika.westerberg@linux.intel.com>
Date: Tue Nov 12 11:57:30 2013 +0200
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Tue Nov 26 16:14:33 2013 +0200
drm/i915: check context reset stats before relocations
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Not all registers need forcewake even if they're not shadowed.
Add the missing check to gen8_writeX() to avoid needless forcewake
usage when writing eg. display registers.
v2: Use straight up <0x40000 check instead of NEEDS_FORCE_WAKE()
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The BIOS or someone else might have done something bad and there
might be old GT FIFO erros reported in GTFIFODBG. Clear those out
in intel_uncore_early_sanitize() to make sure we don't mistake them
for our problems.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These are needed when we cat the debugfs and sysfs files.
V2: - Rebase
V3: - Rebase
V4: - Rebase
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch adds the initial infrastructure to allow a Runtime PM
implementation that sets the device to its D3 state. The patch just
adds the necessary callbacks and the initial infrastructure.
We still don't have any platform that actually uses this
infrastructure, we still don't call get/put in all the places we need
to, and we don't have any function to save/restore the state of the
registers. This is not a problem since no platform uses the code added
by this patch. We have a few people simultaneously working on runtime
PM, so this initial code could help everybody make their plans.
V2: - Move some functions to intel_pm.c
- Remove useless pm_runtime_allow() call at init
- Remove useless pm_runtime_mark_last_busy() call at get
- Use pm_runtime_get_sync() instead of 2 calls
- Add a WARN to check if we're really awake
V3: - Rebase.
V4: - Don't need to call pci_{save,restore}_state and
pci_set_power_sate, since they're already called by the PCI
layer
- Remove wrong pm_runtime_enable() call at init_runtime_pm
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since early sanitize and uncore sanitize are called one after the other,
I think, we can remove second forcewake reset which was are calling
twice in both the functions.
Note that this is merge fallout between
commit ef46e0d247
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Nov 16 16:00:09 2013 +0100
drm/i915: restore the early forcewake cleanup
and
commit 521198a2e7
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Fri Aug 23 16:52:30 2013 +0300
drm/i915: sanitize forcewake registers on reset
Signed-off-by: Deepak S <deepak.s@intel.com>
[danvet: Explain how this came to be.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSogqUAAoJEHm+PkMAQRiGM2MIAJrr5KEXEWuuAR4+JkkWBK7A
+dVT4n1MM4wP/aCIyriSlq7kgT03Wxk4Q4wKsj2wZvDQkNgEQjrctgIihc75jqi5
126nmT3YXJLwgDpFA3RHZUWve3j3vfUG53rRuk7K9Xx1sGWU3Ls7BuInvQZ//+QS
6UB4UuEAalmose5U8ToXQfMqZhjwreZKeb64TEZwFvu2klv4cnka1L/zHbmQGgRg
2Pfv+aUrjsYE8s9lkEKX8MIQsDn28Q5Lsv7XIEQwo2at4rYbJaxX6usuC1OI0MQ5
BLUn1GgtvOidq6FzSg6kXiA/MJYH3J0S+p4uULWAprxA+KeJRbWNRroM94W1qAk=
=1Wcq
-----END PGP SIGNATURE-----
Merge tag 'v3.13-rc3' into drm-intel-next-queued
Linux 3.13-rc3
I need a backmerge for two reasons:
- For merging the ppgtt patches from Ben I need to pull in the bdw
support.
- We now have duplicated calls to intel_uncore_forcewake_reset in the
setup code to due 2 different patches merged into -next and 3.13.
The conflict is silen so I need the merge to be able to apply
Deepak's fixup patch.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
Trivial conflict, it doesn't even show up in the merge diff.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On VLV, FIFO will be shared by both SW and HW. So, we read the
free entries through register and update dev_priv variable
and wait for only 20 entries to be free
From Deepak's follow-up mail explaining why vlv is special:
"On SB, Out of 64 FIFO Entries, 20 Entries will be used by HW and
remaining 44 will be used by the SW,. I think due to this reason, we
have a threshold of 20 Entries."
"On VLV, HW and SW can access all 64 fifo entries, I don't think
having a threshold of 20 Entries is mandatory on VLV. Also, since both
SW and HW can access all 64 Entries. I think on VLV, we need to update
the fifo_count before waiting for the FIFO."
v2: Apply mask when we read the number of free FIFO entries (Ville).
v3: Mask applied after reading the register (Deepak).
Signed-off-by: Deepak S <deepak.s@intel.com>
[danvet: Add further explanation from Deepak to commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a REG_WRITE_FOOTER macro as a counterpart to the REG_WRITE_HEADER.
The current code has the spin_lock() in the HEADER, but the
spin_unlock() is open coded, which looks rather confusing on the first
glance. A bit of additional symmetry might help.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It doesn't like that we assign 0 to a pointer, it wants the real NULL.
On closer look that initialization is actually bogus, and the compiler
can easily see that we never use it unitialized. So let's just drop
this.
Cc: Deepak S <deepak.s@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was fumbled in the conversion to per-engine forcewake.
Cc: Deepak S <deepak.s@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On VLV the GTFIFOCTL register has other bits besides the number of free
entries in the GT wake FIFO. Apply a mask when we read th register to
make sure we don't misinterpret the number of free FIFO entries.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: There's some unclarity about hsw, but brushed off as todays'
Bspec just acting up a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On VLV GTFIFODBG has more bits. Just report them all.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Split vlv force wake routines to help individually control Media/Render
well based on the register access.
We've seen power savings in the lower sub-1W range on workloads that
only need on of the power wells, e.g. glbenchmark, media playback
Note: The same split isn't there for the forcewake queue, only the
forcwake domains are split.
Signed-off-by: Deepak S <deepak.s@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Rebase on top of the removed forcewake hack in the ring irq
get/put code and add a note to add Deepak's answer to Chris question.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Added power well arguments to all the force wake routines
to help us individually control power well based on the
scenario.
Signed-off-by: Deepak S <deepak.s@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Resolve conflict with the removed forcewake hack and drop one
spurious hunk Jesse noticed.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was forgotten in
commit 9d1cb9147d
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Fri Nov 1 13:32:08 2013 -0200
drm/i915: avoid unclaimed registers when capturing the error state
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some BIOS just leak the forcewak bits, which we clean up.
Unfortunately this has been broken in
commit 521198a2e7
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Fri Aug 23 16:52:30 2013 +0300
drm/i915: sanitize forcewake registers on reset
To make this work both for resets and for BIOS takeover just add the
forcewake clearing call back to intel_uncore_early_sanitize.
We need to clear the forcewake in early sanitize so that the forcewak
dance in intel_uncore_init (to figure out whether we have mt or legacy
forcewake on ivb) works. That cleanup fits in nicely with the general
topic of early_sanitize to prepare for the very first mmio ops.
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Jörg Otte <jrg.otte@gmail.com>
References: https://lkml.org/lkml/2013/11/16/40
Cc: stable@vger.kernel.org (for 3.12 only)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull in Jani's backlight rework branch. This was merged through a
separate branch to be able to sort out the Broadwell conflicts
properly before pulling it into the main development branch.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch existed before, but was lost over time.
Note that reset is still somewhat problematic in my limited testing (ie.
module_reload will not pass) but it can be disabled with a module
parameter, and support should be considered preliminary anyway.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Insist that flags and pad fields are zero, so that
we can safely extend the interface in future.
Testcase: igt/gem_reset_stats/params
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This ioctl returns reset stats for specified context.
The struct returned contains context loss counters.
reset_count: all resets across all contexts
batch_active: active batches lost on resets
batch_pending: pending batches lost on resets
v2: get rid of state tracking completely and deliver only counts. Idea
from Chris Wilson.
v3: fix commit message
v4: default context handled inside i915_gem_context_get_hang_stats
v5: reset_count only for priviledged process
v6: ctx=0 needs CAP_SYS_ADMIN for batch_* counters (Chris Wilson)
v7: context hang stats never returns NULL
v8: rebased on top of reworked context hang stats
DRM_RENDER_ALLOW for ioctl
v9: use DEFAULT_CONTEXT_ID. Improve comments for ioctl struct members
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ian Romanick <idr@freedesktop.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's no longer a required workaround on BDW.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Move compile fix from a later patch to this one.]
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Somehow this got missed or dropped during development. The simulator
does not use forcewake, so it's entirely possible it never worked
correctly. After the mmio rework, this will end up in an OOPs, and the
system will not boot.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Use IS_GEN8 instead of IS_BROADWELL.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GEN8 removes the GT FIFO which we've all come to know and love. Instead
it offers a wider range of optimized registers which always keep a
shadowed copy, and are fed to the GPU when it wakes.
How this is implemented in hardware is still somewhat of a mystery. As
far as I can tell, the basic design is as follows:
If the register is not optimized, you must use the old forcewake
mechanism to bring the GT out of sleep. [1]
If register is in the optimized list the write will signal that the
GT should begin to come out of whatever sleep state it is in.
While the GT is coming out of sleep, the requested write will be stored
in an intermediate shadow register.
Do to the fact that the implementation details are not clear, I see
several risks:
1. Order is not preserved as it is with GT FIFO. If we issue multiple
writes to optimized registers, where order matters, we may need to
serialize it with forcewake.
2. The optimized registers have only 1 shadowed slot, meaning if we
issue multiple writes to the same register, and those values need to
reach the GPU in order, forcewake will be required.
[1] We could implement a SW queue the way the GT FIFO used to work if
desired.
NOTE: Compile tested only until we get real silicon.
v2:
- Use a default case to make future platforms also work.
- Get rid of IS_BROADWELL since that's not yet defined, but we want to
MMIO as soon as possible.
v3: Apply suggestions from Mika's review:
- s/optimized/shadowed/
- invert the logic of the helper so that it does what it says (the
code itself was correct, just confusing to read).
v4:
- Squash in lost break.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that MMIO has been split up into gen specific functions it is
obvious when HAS_FPGA_DBG_UNCLAIMED, HAS_FORCE_WAKE are needed. As such,
we can remove this extraneous condition.
As a result of this, as well as previously existing function pointers
for forcewake, we no longer need the has_force_wake member in the device
specific data structure.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Similar to the previous patch which implemented GEN specific reads; this
patch does the same for writes. Writes have a bit of adding complexity
due to the FPGA_DBG feature of HSW plus:
gen[2-4]: nothing special
gen5: ILK dummy write
gen[6-7]: forcewake shenanigans
gen[HSW}: forcewake shenanigans + FPGA_DBG
I was a bit torn about whether or not to combine 6-HSW as one function,
since the FPGA_DBG is cleanly separated, and it wouldn't make the 6-7
MMIO too messy. In the end, I chose the clearest possible solution which
splits out HSW.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Extracting the MMIO read functionality makes per gen handling a bit
simpler, and the overall function a lot easier to read. The increasing
complexity of reads doesn't get too bad as the generation number
increases:
gen[2-4]: Nothing special
gen5: ILK dummy write workaround
gen6+: forcewake shenanigans
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just to make the churn and code duplication in upcoming patches a bit
less, turn code which is common to all GEN MMIO functions into a macro.
v2: Fix typo in subject
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In preparation for having per GEN MMIO functions, create, and start
using MMIO functions in our uncore data structure. This simply makes the
transition easier by allowing us to just plug in the per GEN stuff
later.
For simplicity, I moved the intel_uncore_init() function down since
those rely on static functions defined lower in the file. This is most
of the churn in this patch.
I made one unrelated change here by using off_t datatype for the offset
of the register to write. I like the clarity that this brings to the
code. If I did it as a separate patch, I am pretty certain it would get
bikeshedded to oblivion.
Requested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In order to be able to have virtual functions for the MMIO, we need to
use the raw access function. To keep things simple, just move this to
our early_sanitize code in uncore.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
At least on my i830M here it reliably results in hard system hangs
nowadays. This is much worse than falling back to software rendering,
so I think we should simply rip this out.
After all we don't have any gpu reset for gen3 either, and there are a
lot more of those still around.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
During system boot up, by default, the power gate for render, media and
display well still power gated. Normally, BIOS will turn off the power
gate. In the BIOS-less system, the driver need to turn off the power
gate very early during driver load.
v2: Move this to intel_uncore_sanitize to allow it to get call during
resume path. (Daniel)
v3: Remove redundant write 0 to DPIO_CTL, and use DPIO_RESET instead of
just 0x1 (Ville)
Add turn of power gate for display 2d/render well/media well.
v4: Remove toggle cmnreset in intel_uncore_sanitize. Cmnreset should
toggle after CRI clock source has been selected. Jesse DPIO reset patch
which toggle the cmnreset in intel_modeset_init_hw() should handle it.
(Ville)
Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Obtaining the forcwake requires expensive and time consuming
serialisation. And we often try to obtain the forcewake multiple times
in very quick succession. We can reduce the overhead of these sequences
by delaying the forcewake release, and so not hammer the hw quite so
hard.
I was hoping this would help with the spurious
[drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear.
found on Haswell. Alas not.
v2: Fix teardown ordering - unmap the regs after turning off forcewake,
and make sure we do turn off forcewake - both found by Ville.
v3: As we introduce intel_uncore_fini(), use it to make sure everything
is disabled before we hand back to the BIOS.
Note: I have no claims for improved performance, stablity or power
comsumption for this patch. We should not be hitting the registers often
enough for this to improve benchmarks, but given the nature of our hw it
is likely to improve long term stability.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In reset we try to restore the forcewake state to
pre reset state, using forcewake_count. The reset
doesn't seem to clear the forcewake bits so we
get warn on forcewake ack register not clearing.
Use same mechanism as intel_uncore_sanitize() does
when loading driver to reset the forcewake bits, right
after the chip has been reset.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The TRACE_EVENT_CONDITION is supposed to generate more efficient code
than if (cond) trace(), which is what we are currently using inside the
register access functions.
v2: Rebase onto uncore
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The INTEL_INFO() macro extracts the dev_private pointer from the device,
so passing in the dev_private->dev is a long winded circumlocution.
v2: rebase onto uncore
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Detangle the confusion that NOTRACE variants of the register read/write
routines were directly using the raw register access. We need for those
routines to reuse the common code for serializing register access and
ensuring the correct register power states. This is only possible now
that the only routines that required raw access use their own API.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
